1 files changed, 0 insertions, 129 deletions
diff --git a/plat/renesas/rcar/bl31_plat_setup.c b/plat/renesas/rcar/bl31_plat_setup.c
deleted file mode 100644
index 7bc0d8e27..000000000
--- a/plat/renesas/rcar/bl31_plat_setup.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
- * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#include <stddef.h>
-
-#include <arch.h>
-#include <arch_helpers.h>
-#include <bl31/bl31.h>
-#include <common/bl_common.h>
-#include <common/debug.h>
-#include <drivers/arm/cci.h>
-#include <drivers/console.h>
-#include <lib/mmio.h>
-#include <plat/common/platform.h>
-
-#include "pwrc.h"
-#include "rcar_def.h"
-#include "rcar_private.h"
-#include "rcar_version.h"
-
-static const uint64_t BL31_RO_BASE		= BL_CODE_BASE;
-static const uint64_t BL31_RO_LIMIT		= BL_CODE_END;
-
-#if USE_COHERENT_MEM
-static const uint64_t BL31_COHERENT_RAM_BASE	= BL_COHERENT_RAM_BASE;
-static const uint64_t BL31_COHERENT_RAM_LIMIT	= BL_COHERENT_RAM_END;
-#endif
-
-extern void plat_rcar_gic_driver_init(void);
-extern void plat_rcar_gic_init(void);
-
-u_register_t rcar_boot_mpidr;
-
-static int cci_map[] = {
-	CCI500_CLUSTER0_SL_IFACE_IX_FOR_M3,
-	CCI500_CLUSTER1_SL_IFACE_IX_FOR_M3
-};
-
-void plat_cci_init(void)
-{
-	uint32_t prd;
-
-	prd = mmio_read_32(RCAR_PRR) & (PRR_PRODUCT_MASK | PRR_CUT_MASK);
-
-	if (PRR_PRODUCT_H3_CUT10 == prd || PRR_PRODUCT_H3_CUT11 == prd) {
-		cci_map[0U] = CCI500_CLUSTER0_SL_IFACE_IX;
-		cci_map[1U] = CCI500_CLUSTER1_SL_IFACE_IX;
-	}
-
-	cci_init(RCAR_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
-}
-
-void plat_cci_enable(void)
-{
-	cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
-}
-
-void plat_cci_disable(void)
-{
-	cci_disable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
-}
-
-struct entry_point_info *bl31_plat_get_next_image_ep_info(uint32_t type)
-{
-	bl2_to_bl31_params_mem_t *from_bl2 = (bl2_to_bl31_params_mem_t *)
-					     PARAMS_BASE;
-	entry_point_info_t *next_image_info;
-
-	next_image_info = (type == NON_SECURE) ?
-		&from_bl2->bl33_ep_info : &from_bl2->bl32_ep_info;
-
-	return next_image_info->pc ? next_image_info : NULL;
-}
-
-void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
-				u_register_t arg2, u_register_t arg3)
-{
-	rcar_console_runtime_init();
-
-	NOTICE("BL3-1 : Rev.%s\n", version_of_renesas);
-
-#if RCAR_LSI != RCAR_D3
-	if (RCAR_CLUSTER_A53A57 == rcar_pwrc_get_cluster()) {
-		plat_cci_init();
-		plat_cci_enable();
-	}
-#endif
-}
-
-void bl31_plat_arch_setup(void)
-{
-	rcar_configure_mmu_el3(BL31_BASE,
-			       BL31_LIMIT - BL31_BASE,
-			       BL31_RO_BASE, BL31_RO_LIMIT
-#if USE_COHERENT_MEM
-			       , BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_LIMIT
-#endif
-	    );
-	rcar_pwrc_code_copy_to_system_ram();
-}
-
-void bl31_platform_setup(void)
-{
-	plat_rcar_gic_driver_init();
-	plat_rcar_gic_init();
-
-	/* enable the system level generic timer */
-	mmio_write_32(RCAR_CNTC_BASE + CNTCR_OFF, CNTCR_FCREQ(U(0)) | CNTCR_EN);
-
-	rcar_pwrc_setup();
-#if 0
-	/* TODO: there is a broad number of rcar-gen3 SoC configurations; to
-	   support all of them, Renesas use the pwrc driver to discover what
-	   cores are on/off before announcing the topology.
-	   This code hasnt been ported yet
-	   */
-
-	rcar_setup_topology();
-#endif
-
-	/* mask should match the kernel's MPIDR_HWID_BITMASK so the core can be
-	   identified during cpuhotplug (check the kernel's psci migrate set of
-	   functions */
-	rcar_boot_mpidr = read_mpidr_el1() & 0x0000ffffU;
-}