aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/plat/rpi3.rst7
-rw-r--r--plat/rpi3/aarch64/plat_helpers.S10
-rw-r--r--plat/rpi3/platform.mk9
-rw-r--r--plat/rpi3/rpi3_bl1_setup.c6
-rw-r--r--plat/rpi3/rpi3_bl2_setup.c8
-rw-r--r--plat/rpi3/rpi3_bl31_setup.c13
-rw-r--r--plat/rpi3/rpi3_common.c28
-rw-r--r--plat/rpi3/rpi3_private.h3
8 files changed, 55 insertions, 29 deletions
diff --git a/docs/plat/rpi3.rst b/docs/plat/rpi3.rst
index c30110ede..b7879a85d 100644
--- a/docs/plat/rpi3.rst
+++ b/docs/plat/rpi3.rst
@@ -247,6 +247,11 @@ The following is not currently supported:
- ``LOAD_IMAGE_V2=0``: Only version 2 is supported.
+- ``MULTI_CONSOLE_API=0``: The multi console API must be enabled. Note that the
+ crash console uses the internal 16550 driver functions directly in order to be
+ able to print error messages during early crashes before setting up the
+ multi console API.
+
AArch64 kernel build instructions
---------------------------------
@@ -300,7 +305,7 @@ Setup SD card
The instructions assume that you have an SD card with a fresh install of
`Raspbian`_ (or that, at least, the ``boot`` partition is untouched, or nearly
-untouched). They have been tested with the image available in 2017-09-07.
+untouched). They have been tested with the image available in 2018-03-13.
1. Insert the SD card and open the ``boot`` partition.
diff --git a/plat/rpi3/aarch64/plat_helpers.S b/plat/rpi3/aarch64/plat_helpers.S
index 76a542f5c..65c1bf2d4 100644
--- a/plat/rpi3/aarch64/plat_helpers.S
+++ b/plat/rpi3/aarch64/plat_helpers.S
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -137,7 +137,7 @@ func plat_crash_console_init
mov_imm x0, PLAT_RPI3_UART_BASE
mov_imm x1, PLAT_RPI3_UART_CLK_IN_HZ
mov_imm x2, PLAT_RPI3_UART_BAUDRATE
- b console_core_init
+ b console_16550_core_init
endfunc plat_crash_console_init
/* ---------------------------------------------
@@ -149,7 +149,7 @@ endfunc plat_crash_console_init
*/
func plat_crash_console_putc
mov_imm x1, PLAT_RPI3_UART_BASE
- b console_core_putc
+ b console_16550_core_putc
endfunc plat_crash_console_putc
/* ---------------------------------------------
@@ -161,8 +161,8 @@ endfunc plat_crash_console_putc
* ---------------------------------------------
*/
func plat_crash_console_flush
- mov_imm x1, PLAT_RPI3_UART_BASE
- b console_core_flush
+ mov_imm x0, PLAT_RPI3_UART_BASE
+ b console_16550_core_flush
endfunc plat_crash_console_flush
/* ---------------------------------------------
diff --git a/plat/rpi3/platform.mk b/plat/rpi3/platform.mk
index e201ceed0..2cb7a1520 100644
--- a/plat/rpi3/platform.mk
+++ b/plat/rpi3/platform.mk
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+# Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved.
#
# SPDX-License-Identifier: BSD-3-Clause
#
@@ -81,6 +81,9 @@ USE_COHERENT_MEM := 1
# Enable new version of image loading
LOAD_IMAGE_V2 := 1
+# Use multi console API
+MULTI_CONSOLE_API := 1
+
# Platform build flags
# --------------------
@@ -110,6 +113,10 @@ ifneq (${LOAD_IMAGE_V2}, 1)
$(error Error: rpi3 needs LOAD_IMAGE_V2=1)
endif
+ifneq (${MULTI_CONSOLE_API}, 1)
+ $(error Error: rpi3 needs MULTI_CONSOLE_API=1)
+endif
+
ifeq (${ARCH},aarch32)
$(error Error: AArch32 not supported on rpi3)
endif
diff --git a/plat/rpi3/rpi3_bl1_setup.c b/plat/rpi3/rpi3_bl1_setup.c
index 11c0f4af3..c98715b9a 100644
--- a/plat/rpi3/rpi3_bl1_setup.c
+++ b/plat/rpi3/rpi3_bl1_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -7,7 +7,6 @@
#include <arch.h>
#include <arch_helpers.h>
#include <bl_common.h>
-#include <console.h>
#include <platform_def.h>
#include <xlat_mmu_helpers.h>
#include <xlat_tables_defs.h>
@@ -29,8 +28,7 @@ meminfo_t *bl1_plat_sec_mem_layout(void)
void bl1_early_platform_setup(void)
{
/* Initialize the console to provide early debug support */
- console_init(PLAT_RPI3_UART_BASE, PLAT_RPI3_UART_CLK_IN_HZ,
- PLAT_RPI3_UART_BAUDRATE);
+ rpi3_console_init();
/* Allow BL1 to see the whole Trusted RAM */
bl1_tzram_layout.total_base = BL_RAM_BASE;
diff --git a/plat/rpi3/rpi3_bl2_setup.c b/plat/rpi3/rpi3_bl2_setup.c
index 1fd822e9a..6d43dceac 100644
--- a/plat/rpi3/rpi3_bl2_setup.c
+++ b/plat/rpi3/rpi3_bl2_setup.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -7,7 +7,6 @@
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
-#include <console.h>
#include <debug.h>
#include <desc_image_load.h>
#include <platform_def.h>
@@ -27,8 +26,7 @@ static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
/* Initialize the console to provide early debug support */
- console_init(PLAT_RPI3_UART_BASE, PLAT_RPI3_UART_CLK_IN_HZ,
- PLAT_RPI3_UART_BAUDRATE);
+ rpi3_console_init();
/* Setup the BL2 memory layout */
bl2_tzram_layout = *mem_layout;
@@ -40,7 +38,7 @@ void bl2_platform_setup(void)
{
/*
* This is where a TrustZone address space controller and other
- * security related peripherals, would be configured.
+ * security related peripherals would be configured.
*/
}
diff --git a/plat/rpi3/rpi3_bl31_setup.c b/plat/rpi3/rpi3_bl31_setup.c
index 391335643..58344ae99 100644
--- a/plat/rpi3/rpi3_bl31_setup.c
+++ b/plat/rpi3/rpi3_bl31_setup.c
@@ -1,12 +1,11 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <assert.h>
#include <bl_common.h>
-#include <console.h>
#include <platform.h>
#include <platform_def.h>
#include <xlat_mmu_helpers.h>
@@ -58,8 +57,7 @@ void bl31_early_platform_setup(void *from_bl2,
void *plat_params_from_bl2)
{
/* Initialize the console to provide early debug support */
- console_init(PLAT_RPI3_UART_BASE, PLAT_RPI3_UART_CLK_IN_HZ,
- PLAT_RPI3_UART_BAUDRATE);
+ rpi3_console_init();
#if RESET_TO_BL31
@@ -159,10 +157,3 @@ void bl31_platform_setup(void)
return;
}
-
-void bl31_plat_runtime_setup(void)
-{
- /* Initialize the runtime console */
- console_init(PLAT_RPI3_UART_BASE, PLAT_RPI3_UART_CLK_IN_HZ,
- PLAT_RPI3_UART_BAUDRATE);
-}
diff --git a/plat/rpi3/rpi3_common.c b/plat/rpi3/rpi3_common.c
index 97dce0913..03914a6d7 100644
--- a/plat/rpi3/rpi3_common.c
+++ b/plat/rpi3/rpi3_common.c
@@ -1,14 +1,16 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <bl_common.h>
+#include <console.h>
#include <debug.h>
#include <interrupt_mgmt.h>
#include <platform_def.h>
+#include <uart_16550.h>
#include <xlat_tables_v2.h>
#include "rpi3_hw.h"
@@ -69,6 +71,30 @@ static const mmap_region_t plat_rpi3_mmap[] = {
#endif
/*******************************************************************************
+ * Function that sets up the console
+ ******************************************************************************/
+static console_16550_t rpi3_console;
+
+void rpi3_console_init(void)
+{
+ int rc = console_16550_register(PLAT_RPI3_UART_BASE,
+ PLAT_RPI3_UART_CLK_IN_HZ,
+ PLAT_RPI3_UART_BAUDRATE,
+ &rpi3_console);
+ if (rc == 0) {
+ /*
+ * The crash console doesn't use the multi console API, it uses
+ * the core console functions directly. It is safe to call panic
+ * and let it print debug information.
+ */
+ panic();
+ }
+
+ console_set_scope(&rpi3_console.console,
+ CONSOLE_FLAG_BOOT | CONSOLE_FLAG_RUNTIME);
+}
+
+/*******************************************************************************
* Function that sets up the translation tables.
******************************************************************************/
void rpi3_setup_page_tables(uintptr_t total_base, size_t total_size,
diff --git a/plat/rpi3/rpi3_private.h b/plat/rpi3/rpi3_private.h
index 01c4055f5..a9fbfe479 100644
--- a/plat/rpi3/rpi3_private.h
+++ b/plat/rpi3/rpi3_private.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2015-2017, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -14,6 +14,7 @@
******************************************************************************/
/* Utility functions */
+void rpi3_console_init(void);
void rpi3_setup_page_tables(uintptr_t total_base, size_t total_size,
uintptr_t code_start, uintptr_t code_limit,
uintptr_t rodata_start, uintptr_t rodata_limit
generated by cgit v1.2.3 (git 2.25.1) at 2025-06-15 07:22:32 +0000