diff options
| author | Guy Harris <guy@alum.mit.edu> | 2002-02-12 23:52:34 +0000 |
|---|---|---|
| committer | Guy Harris <guy@alum.mit.edu> | 2002-02-12 23:52:34 +0000 |
| commit | 869e4d94f628fbf89f69333be7da841090fdeac9 (patch) | |
| tree | 18c896b3510740399b56d3f90f51a8e5d01aabde | |
| parent | 8bf31f9c18057288b717d842684f87fba5b66d08 (diff) | |
| download | wireshark-869e4d94f628fbf89f69333be7da841090fdeac9.tar.gz wireshark-869e4d94f628fbf89f69333be7da841090fdeac9.tar.bz2 wireshark-869e4d94f628fbf89f69333be7da841090fdeac9.zip | |
Move all the stuff in "packet-scsi.h" that's solely for the use of
"packet-scsi.c" into "packet-scsi.c"; the iSCSI dissector doesn't need
its own versions of a pile of static data structures used only by
"packet-scsi.c", nor does it need a pile of typedefs and #defines used
only by "packet-scsi.c".
The iSCSI dissector *does* use "scsi_status_val", so make that
non-static, and export it from "packet-scsi.h".
svn path=/trunk/; revision=4724
| -rw-r--r-- | packet-scsi.c | 927 | ||||
| -rw-r--r-- | packet-scsi.h | 926 |
2 files changed, 928 insertions, 925 deletions
diff --git a/packet-scsi.c b/packet-scsi.c index 49677b2bd6..26639f5120 100644 --- a/packet-scsi.c +++ b/packet-scsi.c @@ -2,7 +2,7 @@ * Routines for decoding SCSI CDBs and responses * Author: Dinesh G Dutt (ddutt@cisco.com) * - * $Id: packet-scsi.c,v 1.3 2002/01/21 07:36:41 guy Exp $ + * $Id: packet-scsi.c,v 1.4 2002/02/12 23:52:34 guy Exp $ * * Ethereal - Network traffic analyzer * By Gerald Combs <gerald@ethereal.com> @@ -156,6 +156,931 @@ static int hf_scsi_sscopcode = -1; static gint ett_scsi = -1; static gint ett_scsi_page = -1; + +typedef guint32 scsi_cmnd_type; +typedef guint32 scsi_device_type; + +/* Valid SCSI Device Types */ +#define SCSI_CMND_SPC2 1 +#define SCSI_CMND_SBC2 2 +#define SCSI_CMND_SSC2 3 + +/* SPC-2 Commands */ + +#define SCSI_SPC2_INQUIRY 0x12 +#define SCSI_SPC2_EXTCOPY 0x83 +#define SCSI_SPC2_LOGSELECT 0x4C +#define SCSI_SPC2_LOGSENSE 0x4D +#define SCSI_SPC2_MODESELECT6 0x15 +#define SCSI_SPC2_MODESELECT10 0x55 +#define SCSI_SPC2_MODESENSE6 0x1A +#define SCSI_SPC2_MODESENSE10 0x5A +#define SCSI_SPC2_PERSRESVIN 0x5E +#define SCSI_SPC2_PERSRESVOUT 0x5F +#define SCSI_SPC2_PREVMEDREMOVAL 0x1E +#define SCSI_SPC2_READBUFFER 0x3C +#define SCSI_SPC2_RCVCOPYRESULTS 0x84 +#define SCSI_SPC2_RCVDIAGRESULTS 0x1C +#define SCSI_SPC2_RELEASE6 0x17 +#define SCSI_SPC2_RELEASE10 0x57 +#define SCSI_SPC2_REPORTDEVICEID 0xA3 +#define SCSI_SPC2_REPORTLUNS 0xA0 +#define SCSI_SPC2_REQSENSE 0x03 +#define SCSI_SPC2_RESERVE6 0x16 +#define SCSI_SPC2_RESERVE10 0x56 +#define SCSI_SPC2_SENDDIAG 0x1D +#define SCSI_SPC2_SETDEVICEID 0xA4 +#define SCSI_SPC2_TESTUNITRDY 0x00 +#define SCSI_SPC2_WRITEBUFFER 0x3B + +static const value_string scsi_spc2_val[] = { + {SCSI_SPC2_EXTCOPY , "Extended Copy"}, + {SCSI_SPC2_INQUIRY , "Inquiry"}, + {SCSI_SPC2_LOGSELECT , "Log Select"}, + {SCSI_SPC2_LOGSENSE , "Log Sense"}, + {SCSI_SPC2_MODESELECT6 , "Mode Select (6)"}, + {SCSI_SPC2_MODESELECT10 , "Mode Select (10)"}, + {SCSI_SPC2_MODESENSE6 , "Mode Sense (6)"}, + {SCSI_SPC2_MODESENSE10 , "Mode Sense (10)"}, + {SCSI_SPC2_PERSRESVIN , "Persistent Reserve In"}, + {SCSI_SPC2_PERSRESVOUT , "Persistent Reserve Out"}, + {SCSI_SPC2_PREVMEDREMOVAL , "Prevent Allow Medium Removal"}, + {SCSI_SPC2_RCVCOPYRESULTS , "Receive Copy Results"}, + {SCSI_SPC2_RCVDIAGRESULTS , "Receive Diagnostics Results"}, + {SCSI_SPC2_READBUFFER , "Read Buffer"}, + {SCSI_SPC2_RELEASE6 , "Release (6)"}, + {SCSI_SPC2_RELEASE10 , "Release (10)"}, + {SCSI_SPC2_REPORTDEVICEID , "Report Device ID"}, + {SCSI_SPC2_REPORTLUNS , "Report LUNs"}, + {SCSI_SPC2_REQSENSE , "Request Sense"}, + {SCSI_SPC2_RESERVE6 , "Reserve (6)"}, + {SCSI_SPC2_RESERVE10 , "Reserve (10)"}, + {SCSI_SPC2_TESTUNITRDY , "Test Unit Ready"}, + {SCSI_SPC2_WRITEBUFFER , "Write Buffer"}, + {0, NULL}, +}; + +/* SBC-2 Commands */ +#define SCSI_SBC2_FORMATUNIT 0x04 +#define SCSI_SBC2_LOCKUNLKCACHE10 0x36 +#define SCSI_SPC2_LOCKUNLKCACHE16 0x92 +#define SCSI_SBC2_PREFETCH10 0x34 +#define SCSI_SBC2_PREFETCH16 0x90 +#define SCSI_SBC2_READ6 0x08 +#define SCSI_SBC2_READ10 0x28 +#define SCSI_SBC2_READ12 0xA8 +#define SCSI_SBC2_READ16 0x88 +#define SCSI_SBC2_READCAPACITY 0x25 +#define SCSI_SBC2_READDEFDATA10 0x37 +#define SCSI_SBC2_READDEFDATA12 0xB7 +#define SCSI_SBC2_READLONG 0x3E +#define SCSI_SBC2_REASSIGNBLKS 0x07 +#define SCSI_SBC2_REBUILD16 0x81 +#define SCSI_SBC2_REBUILD32 0x7F +#define SCSI_SBC2_REGENERATE16 0x82 +#define SCSI_SBC2_REGENERATE32 0x7F +#define SCSI_SBC2_SEEK10 0x2B +#define SCSI_SBC2_SETLIMITS10 0x33 +#define SCSI_SBC2_SETLIMITS12 0xB3 +#define SCSI_SBC2_STARTSTOPUNIT 0x1B +#define SCSI_SBC2_SYNCCACHE10 0x35 +#define SCSI_SBC2_SYNCCACHE16 0x91 +#define SCSI_SBC2_VERIFY10 0x2F +#define SCSI_SBC2_VERIFY12 0xAF +#define SCSI_SBC2_VERIFY16 0x8F +#define SCSI_SBC2_WRITE6 0x0A +#define SCSI_SBC2_WRITE10 0x2A +#define SCSI_SBC2_WRITE12 0xAA +#define SCSI_SBC2_WRITE16 0x8A +#define SCSI_SBC2_WRITENVERIFY10 0x2E +#define SCSI_SBC2_WRITENVERIFY12 0xAE +#define SCSI_SBC2_WRITENVERIFY16 0x8E +#define SCSI_SBC2_WRITELONG 0x3F +#define SCSI_SBC2_WRITESAME10 0x41 +#define SCSI_SBC2_WRITESAME16 0x93 +#define SCSI_SBC2_XDREAD10 0x52 +#define SCSI_SBC2_XDREAD32 0x7F +#define SCSI_SBC2_XDWRITE10 0x50 +#define SCSI_SBC2_XDWRITE32 0x7F +#define SCSI_SBC2_XDWRITEREAD10 0x53 +#define SCSI_SBC2_XDWRITEREAD32 0x7F +#define SCSI_SBC2_XDWRITEEXTD16 0x80 +#define SCSI_SBC2_XDWRITEEXTD32 0x7F +#define SCSI_SBC2_XPWRITE10 0x51 +#define SCSI_SBC2_XPWRITE32 0x7F + + +static const value_string scsi_sbc2_val[] = { + {SCSI_SBC2_FORMATUNIT , "Format Unit"}, + {SCSI_SBC2_LOCKUNLKCACHE10, "Lock Unlock Cache (10)"}, + {SCSI_SPC2_LOCKUNLKCACHE16, "Lock Unlock Cache (16)"}, + {SCSI_SBC2_PREFETCH10, "Pre-Fetch (10)"}, + {SCSI_SBC2_PREFETCH16, "Pre-Fetch (16)"}, + {SCSI_SBC2_READ6 , "Read (6)"}, + {SCSI_SBC2_READ10 , "Read (10)"}, + {SCSI_SBC2_READ12 , "Read (12)"}, + {SCSI_SBC2_READ16 , "Read (16)"}, + {SCSI_SBC2_READCAPACITY , "Read Capacity"}, + {SCSI_SBC2_READDEFDATA10 , "Read Defect Data (10)"}, + {SCSI_SBC2_READDEFDATA12 , "Read Defect Data (12)"}, + {SCSI_SBC2_READLONG, "Read Long"}, + {SCSI_SBC2_REASSIGNBLKS , "Reassign Blocks"}, + {SCSI_SBC2_REBUILD16, "Rebuild (16)"}, + {SCSI_SBC2_REBUILD32, "Rebuild (32)"}, + {SCSI_SBC2_REGENERATE16, "Regenerate (16)"}, + {SCSI_SBC2_REGENERATE32, "Regenerate (32)"}, + {SCSI_SBC2_SEEK10, "Seek (10)"}, + {SCSI_SBC2_SETLIMITS10, "Set Limits (10)"}, + {SCSI_SBC2_SETLIMITS12, "Set Limits (12)"}, + {SCSI_SBC2_STARTSTOPUNIT, "Start Stop Unit"}, + {SCSI_SBC2_SYNCCACHE10, "Synchronize Cache (10)"}, + {SCSI_SBC2_SYNCCACHE16, "Synchronize Cache (16)"}, + {SCSI_SBC2_VERIFY10, "Verify (10)"}, + {SCSI_SBC2_VERIFY12, "Verify (12)"}, + {SCSI_SBC2_VERIFY16, "Verify (16)"}, + {SCSI_SBC2_WRITE6 , "Write (6)"}, + {SCSI_SBC2_WRITE10 , "Write (10)"}, + {SCSI_SBC2_WRITE12 , "Write (12)"}, + {SCSI_SBC2_WRITE16 , "Write (16)"}, + {SCSI_SBC2_WRITENVERIFY10, "Write & Verify (10)"}, + {SCSI_SBC2_WRITENVERIFY12, "Write & Verify (12)"}, + {SCSI_SBC2_WRITENVERIFY16, "Write & Verify (16)"}, + {SCSI_SBC2_WRITELONG, "Write Long"}, + {SCSI_SBC2_WRITESAME10, "Write Same (10)"}, + {SCSI_SBC2_WRITESAME16, "Write Same (16)"}, + {SCSI_SBC2_XDREAD10, "XdRead (10)"}, + {SCSI_SBC2_XDREAD32, "XdRead (32)"}, + {SCSI_SBC2_XDWRITE10, "XdWrite (10)"}, + {SCSI_SBC2_XDWRITE32, "XdWrite(32)"}, + {SCSI_SBC2_XDWRITEREAD10, "XdWriteRead (10)"}, + {SCSI_SBC2_XDWRITEREAD32, "XdWriteRead (32)"}, + {SCSI_SBC2_XDWRITEEXTD16, "XdWrite Extended (16)"}, + {SCSI_SBC2_XDWRITEEXTD32, "XdWrite Extended (32)"}, + {SCSI_SBC2_XPWRITE10, "XpWrite (10)"}, + {SCSI_SBC2_XPWRITE32, "XpWrite (32)"}, + {0, NULL}, +}; + +/* SSC2 Commands */ +#define SCSI_SSC2_ERASE_16 0x93 +#define SCSI_SSC2_FORMAT_MEDIUM 0x04 +#define SCSI_SSC2_LOAD_UNLOAD 0x1B +#define SCSI_SSC2_LOCATE_16 0x92 +#define SCSI_SSC2_MOVE_MEDIUM 0xA5 +#define SCSI_SSC2_MOVE_MEDIUM_ATTACHED 0xA7 +#define SCSI_SSC2_READ_16 0x88 +#define SCSI_SSC2_READ_BLOCK_LIMITS 0x05 +#define SCSI_SSC2_READ_ELEMENT_STATUS 0xB8 +#define SCSI_SSC2_READ_ELEMENT_STATUS_ATTACHED 0xB4 +#define SCSI_SSC2_READ_POSITION 0x34 +#define SCSI_SSC2_READ_REVERSE_16 0x81 +#define SCSI_SSC2_RECOVER_BUFFERED_DATA 0x14 +#define SCSI_SSC2_REPORT_DENSITY_SUPPORT 0x44 +#define SCSI_SSC2_REWIND 0x01 +#define SCSI_SSC2_SET_CAPACITY 0x0B +#define SCSI_SSC2_SPACE_16 0x91 +#define SCSI_SSC2_VERIFY_16 0x8F +#define SCSI_SSC2_WRITE_16 0x8A +#define SCSI_SSC2_WRITE_FILEMARKS_16 0x80 +#define SCSI_SSC2_ERASE_6 0x19 +#define SCSI_SSC2_LOCATE_10 0x2B +#define SCSI_SSC2_LOCATE_16 0x92 +#define SCSI_SSC2_READ_6 0x08 +#define SCSI_SSC2_READ_REVERSE_6 0x0F +#define SCSI_SSC2_SPACE_6 0x11 +#define SCSI_SSC2_VERIFY_6 0x13 +#define SCSI_SSC2_WRITE_6 0x0A +#define SCSI_SSC2_WRITE_FILEMARKS_6 0x10 + +static const value_string scsi_ssc2_val[] = { + {SCSI_SSC2_ERASE_16 , "Erase(16)"}, + {SCSI_SSC2_FORMAT_MEDIUM , "Format Medium"}, + {SCSI_SSC2_LOAD_UNLOAD , "Load Unload"}, + {SCSI_SSC2_LOCATE_16 , "Locate(16)"}, + {SCSI_SSC2_MOVE_MEDIUM , "Move Medium"}, + {SCSI_SSC2_MOVE_MEDIUM_ATTACHED , "Move Medium Attached"}, + {SCSI_SSC2_READ_16 , "Read(16)"}, + {SCSI_SSC2_READ_BLOCK_LIMITS , "Read Block Limits"}, + {SCSI_SSC2_READ_ELEMENT_STATUS , "Read Element Status"}, + {SCSI_SSC2_READ_ELEMENT_STATUS_ATTACHED, "Read Element Status Attached"}, + {SCSI_SSC2_READ_POSITION , "Read Position"}, + {SCSI_SSC2_READ_REVERSE_16 , "Read Reverse(16)"}, + {SCSI_SSC2_RECOVER_BUFFERED_DATA , "Recover Buffered Data"}, + {SCSI_SSC2_REPORT_DENSITY_SUPPORT , "Report Density Support"}, + {SCSI_SSC2_REWIND , "Rewind"}, + {SCSI_SSC2_SET_CAPACITY , "Set Capacity"}, + {SCSI_SSC2_SPACE_16 , "Space(16)"}, + {SCSI_SSC2_VERIFY_16 , "Verify(16)"}, + {SCSI_SSC2_WRITE_16 , "Write(16)"}, + {SCSI_SSC2_WRITE_FILEMARKS_16 , "Write Filemarks(16)"}, + {SCSI_SSC2_ERASE_6 , "Erase(6)"}, + {SCSI_SSC2_LOCATE_10 , "Locate(10)"}, + {SCSI_SSC2_LOCATE_16 , "Locate(16)"}, + {SCSI_SSC2_READ_6 , "Read(6)"}, + {SCSI_SSC2_READ_REVERSE_6 , "Read Reverse(6)"}, + {SCSI_SSC2_SPACE_6 , "Space(6)"}, + {SCSI_SSC2_VERIFY_6 , "Verify(6)"}, + {SCSI_SSC2_WRITE_6 , "Write(6)"}, + {SCSI_SSC2_WRITE_FILEMARKS_6 , "Write Filemarks(6)"}, +}; + +static const value_string scsi_evpd_pagecode_val[] = { + {0x00, "Supported Vital Data Product Pages"}, + {0x80, "Unit Serial Number Page"}, + {0x82, "ASCII Implemented Operating Definition Page"}, + {0x01, "ASCII Information Page"}, + {0x02, "ASCII Information Page"}, + {0x03, "ASCII Information Page"}, + {0x04, "ASCII Information Page"}, + {0x05, "ASCII Information Page"}, + {0x06, "ASCII Information Page"}, + {0x07, "ASCII Information Page"}, + {0x83, "Device Identification Page"}, + {0, NULL}, +}; + +static const value_string scsi_logsel_pc_val[] = { + {0, "Current Threshold Values"}, + {1, "Current Cumulative Values"}, + {2, "Default Threshold Values"}, + {3, "Default Cumulative Values"}, + {0, NULL}, +}; + +static const value_string scsi_logsns_pc_val[] = { + {0, "Threshold Values"}, + {1, "Cumulative Values"}, + {2, "Default Threshold Values"}, + {3, "Default Cumulative Values"}, + {0, NULL}, +}; + +static const value_string scsi_logsns_page_val[] = { + {0xF, "Application Client Page"}, + {0x1, "Buffer Overrun/Underrun Page"}, + {0x3, "Error Counter (read) Page"}, + {0x4, "Error Counter (read reverse) Page"}, + {0x5, "Error Counter (verify) Page"}, + {0x1, "Error Counter (write) Page"}, + {0xB, "Last n Deferred Errors or Async Events Page"}, + {0x7, "Last n Error Events Page"}, + {0x6, "Non-medium Error Page"}, + {0x10, "Self-test Results Page"}, + {0xE, "Start-Stop Cycle Counter Page"}, + {0x0, "Supported Log Pages"}, + {0xD, "Temperature Page"}, + {0, NULL}, +}; + +static const value_string scsi_modesns_pc_val[] = { + {0, "Current Values"}, + {1, "Changeable Values"}, + {2, "Default Values"}, + {3, "Saved Values"}, + {0, NULL}, +}; + +#define SCSI_MODEPAGE_VEND 0x0 +#define SCSI_MODEPAGE_CTL 0x0A +#define SCSI_MODEPAGE_DISCON 0x02 +#define SCSI_MODEPAGE_INFOEXCP 0x1C +#define SCSI_MODEPAGE_PWR 0x1A +#define SCSI_MODEPAGE_LUN 0x18 +#define SCSI_MODEPAGE_PORT 0x19 +#define SCSI_MODEPAGE_RDWRERR 0x01 +#define SCSI_MODEPAGE_FMTDEV 0x03 +#define SCSI_MODEPAGE_DISKGEOM 0x04 +#define SCSI_MODEPAGE_FLEXDISK 0x05 +#define SCSI_MODEPAGE_VERERR 0x07 +#define SCSI_MODEPAGE_CACHE 0x08 +#define SCSI_MODEPAGE_PERDEV 0x09 +#define SCSI_MODEPAGE_MEDTYPE 0x0B +#define SCSI_MODEPAGE_NOTPART 0x0C +#define SCSI_MODEPAGE_XORCTL 0x10 + +static const value_string scsi_modesns_page_val[] = { + {0, "Vendor Specific Page"}, + {0x0A, "Control"}, + {0x02, "Disconnect-Reconnect"}, + {0x1C, "Informational Exceptions Control"}, + {0x1A, "Power Condition"}, + {0x18, "Protocol Specific LUN"}, + {0x19, "Protocol-Specific Port"}, + {0x01, "Read/Write Error Recovery"}, + {0x03, "Format Device"}, + {0x04, "Rigid Disk Geometry"}, + {0x05, "Flexible Disk"}, + {0x07, "Verify Error Recovery"}, + {0x08, "Caching"}, + {0x09, "Peripheral Device"}, + {0x0B, "Medium Types Supported"}, + {0x0C, "Notch & Partition"}, + {0x10, "XOR Control"}, + {0x3F, "Return All Mode Pages"}, + {0, NULL}, +}; + +#define SCSI_SPC2_RESVIN_SVCA_RDKEYS 0 +#define SCSI_SPC2_RESVIN_SVCA_RDRESV 1 + +static const value_string scsi_persresvin_svcaction_val[] = { + {SCSI_SPC2_RESVIN_SVCA_RDKEYS, "Read Keys"}, + {SCSI_SPC2_RESVIN_SVCA_RDRESV, "Read Reservation"}, + {0, NULL}, +}; + +static const value_string scsi_persresvout_svcaction_val[] = { + {0, "Register"}, + {1, "Reserve"}, + {2, "Release"}, + {3, "Clear"}, + {4, "Preempt"}, + {5, "Preempt & Abort"}, + {6, "Register & Ignore Existing Key"}, + {0, NULL}, +}; + +static const value_string scsi_persresv_scope_val[] = { + {0, "LU Scope"}, + {1, "Obsolete"}, + {2, "Element Scope"}, + {0, NULL}, +}; + +static const value_string scsi_persresv_type_val[] = { + {1, "Write Excl"}, + {3, "Excl Access"}, + {5, "Write Excl, Registrants Only"}, + {7, "Excl Access, Registrants Only"}, + {0, NULL}, +}; + +/* SCSI Device Types */ +#define SCSI_DEV_SBC 0x0 +#define SCSI_DEV_SSC 0x1 +#define SCSI_DEV_PRNT 0x2 +#define SCSI_DEV_PROC 0x3 +#define SCSI_DEV_WORM 0x4 +#define SCSI_DEV_CDROM 0x5 +#define SCSI_DEV_SCAN 0x6 +#define SCSI_DEV_OPTMEM 0x7 +#define SCSI_DEV_SMC 0x8 +#define SCSI_DEV_COMM 0x9 +#define SCSI_DEV_RAID 0xC +#define SCSI_DEV_SES 0xD +#define SCSI_DEV_RBC 0xE +#define SCSI_DEV_OCRW 0xF +#define SCSI_DEV_OSD 0x11 + +static const value_string scsi_devtype_val[] = { + {SCSI_DEV_SBC , "Direct Access Device"}, + {SCSI_DEV_SSC , "Sequential Access Device"}, + {SCSI_DEV_PRNT , "Printer"}, + {SCSI_DEV_PROC , "Processor"}, + {SCSI_DEV_WORM , "WORM"}, + {SCSI_DEV_CDROM , "CD ROM"}, + {SCSI_DEV_SCAN , "Scanner"}, + {SCSI_DEV_OPTMEM, "Optical Memory"}, + {SCSI_DEV_SMC , "Medium Changer"}, + {SCSI_DEV_COMM , "Communication"}, + {SCSI_DEV_RAID , "Storage Array"}, + {SCSI_DEV_SES , "Enclosure Services"}, + {SCSI_DEV_RBC , "Simplified Block Device"}, + {SCSI_DEV_OCRW , "OCRW"}, + {SCSI_DEV_OSD , "OSD"}, + {0, NULL}, +}; + +static const enum_val_t scsi_devtype_options[] = { + {"Block Device", SCSI_DEV_SBC}, + {"Sequential Device", SCSI_DEV_SSC}, + {NULL, -1}, +}; + +static const value_string scsi_inquiry_vers_val[] = { + {0, "No Compliance to any Standard"}, + {2, "Compliance to ANSI X3.131:1994"}, + {3, "Compliance to ANSI X3.301:1997"}, + {4, "Compliance to SPC-2"}, + {0x80, "Compliance to ISO/IEC 9316:1995"}, + {0x82, "Compliance to ISO/IEC 9316:1995 and to ANSI X3.131:1994"}, + {0x83, "Compliance to ISO/IEC 9316:1995 and to ANSI X3.301:1997"}, + {0x84, "Compliance to ISO/IEC 9316:1995 and SPC-2"}, + {0, NULL}, +}; + +static const value_string scsi_modesense_medtype_val[] = { + {0, "Default"}, + {1, "Flexible Disk, Single-sided"}, + {2, "Flexible Disk, Double-sided"}, + {0, NULL}, +}; + +static const value_string scsi_verdesc_val[] = { + {0x0d40, "FC-AL (No Version)"}, + {0x0d5c, "FC-AL ANSI X3.272:1996"}, + {0x0d60, "FC-AL-2 (no version claimed)"}, + {0x0d7c, "FC-AL-2 ANSI NCITS.332:1999"}, + {0x0d61, "FC-AL-2 T11/1133 revision 7.0"}, + {0x1320, "FC-FLA (no version claimed)"}, + {0x133c, "FC-FLA ANSI NCITS TR-20:1998"}, + {0x133b, "FC-FLA T11/1235 revision 7"}, + {0x0da0, "FC-FS (no version claimed)"}, + {0x0db7, "FC-FS T11/1331 revision 1.2"}, + {0x08c0, "FCP (no version claimed)"}, + {0x08dc, "FCP ANSI X3.269:1996"}, + {0x08db, "FCP T10/0993 revision 12"}, + {0x1340, "FC-PLDA (no version claimed)"}, + {0x135c, "FC-PLDA ANSI NCITS TR-19:1998"}, + {0x135b, "FC-PLDA T11/1162 revision 2.1"}, + {0x0900, "FCP-2 (no version claimed)"}, + {0x0901, "FCP-2 T10/1144 revision 4"}, + {0x003c, "SAM ANSI X3.270:1996"}, + {0x003b, "SAM T10/0994 revision 18"}, + {0x0040, "SAM-2 (no version claimed)"}, + {0x0020, "SAM (no version claimed)"}, + {0x0180, "SBC (no version claimed)"}, + {0x019c, "SBC ANSI NCITS.306:1998"}, + {0x019b, "SBC T10/0996 revision 08c"}, + {0x0320, "SBC-2 (no version claimed)"}, + {0x01c0, "SES (no version claimed)"}, + {0x01dc, "SES ANSI NCITS.305:1998"}, + {0x01db, "SES T10/1212 revision 08b"}, + {0x01de, "SES ANSI NCITS.305:1998 w/ Amendment ANSI NCITS.305/AM1:2000"}, + {0x01dd, "SES T10/1212 revision 08b w/ Amendment ANSI NCITS.305/AM1:2000"}, + {0x0120, "SPC (no version claimed)"}, + {0x013c, "SPC ANSI X3.301:1997"}, + {0x013b, "SPC T10/0995 revision 11a"}, + {0x0260, "SPC-2 (no version claimed)"}, + {0x0267, "SPC-2 T10/1236 revision 12"}, + {0x0269, "SPC-2 T10/1236 revision 18"}, + {0x0300, "SPC-3 (no version claimed)"}, + {0x0960, "iSCSI (no version claimed)"}, + {0x0d80, "FC-PH-3 (no version claimed)"}, + {0x0d9c, "FC-PH-3 ANSI X3.303-1998"}, + {0x0d20, "FC-PH (no version claimed)"}, + {0, NULL}, +}; + +#define SCSI_EVPD_SUPPPG 0 +#define SCSI_EVPD_ASCIIOPER 0x82 +#define SCSI_EVPD_DEVID 0x83 +#define SCSI_EVPD_DEVSERNUM 0x80 + +static const value_string scsi_inq_evpd_val[] = { + {SCSI_EVPD_SUPPPG, "Supported Vital Product Data Page"}, + {SCSI_EVPD_ASCIIOPER, "ASCII Implemented Operating Definition Page"}, + {SCSI_EVPD_DEVID, "Device ID Page"}, + {SCSI_EVPD_DEVSERNUM, "Unit Serial Number Page"}, + {0x0, NULL}, +}; + +/* Command Support Data "Support" field definitions */ +static const value_string scsi_cmdt_supp_val[] = { + {0, "Data not currently available"}, + {1, "SCSI Command not supported"}, + {2, "Reserved"}, + {3, "SCSI Command supported in conformance with a SCSI standard"}, + {4, "Vendor Specific"}, + {5, "SCSI Command supported in a vendor specific manner"}, + {6, "Vendor Specific"}, + {7, "Reserved"}, + {0, NULL}, +}; + +static const value_string scsi_devid_codeset_val[] = { + {0, "Reserved"}, + {1, "Identifier field contains binary values"}, + {2, "Identifier field contains ASCII graphic codes"}, + {0, NULL}, +}; + +static const value_string scsi_devid_assoc_val[] = { + {0, "Identifier is associated with addressed logical/physical device"}, + {1, "Identifier is associated with the port that received the request"}, + {0, NULL}, +}; + +static const value_string scsi_devid_idtype_val[] = { + {0, "Vendor-specific ID (non-globally unique)"}, + {1, "Vendor-ID + vendor-specific ID (globally unique)"}, + {2, "EUI-64 ID"}, + {3, "WWN"}, + {4, "4-byte Binary Number/Reserved"}, + {0, NULL}, +}; + +static const value_string scsi_modesns_mrie_val[] = { + {0, "No Reporting of Informational Exception Condition"}, + {1, "Asynchronous Error Reporting"}, + {2, "Generate Unit Attention"}, + {3, "Conditionally Generate Recovered Error"}, + {4, "Unconditionally Generate Recovered Error"}, + {5, "Generate No Sense"}, + {6, "Only Report Informational Exception Condition on Request"}, + {0, NULL}, +}; + +static const value_string scsi_modesns_tst_val[] = { + {0, "Task Set Per LU For All Initiators"}, + {1, "Task Set Per Initiator Per LU"}, + {0, NULL}, +}; + +static const value_string scsi_modesns_qmod_val[] = { + {0, "Restricted reordering"}, + {1, "Unrestricted reordering"}, + {0, NULL}, +}; + +static const true_false_string scsi_modesns_qerr_val = { + "All blocked tasks shall be aborted on CHECK CONDITION", + "Blocked tasks shall resume after ACA/CA is cleared", +}; + +static const true_false_string scsi_modesns_tas_val = { + "Terminated tasks aborted without informing initiators", + "Tasks aborted by another initiator terminated with TASK ABORTED", +}; + +static const true_false_string scsi_modesns_rac_val = { + "Report a CHECK CONDITION Instead of Long Busy Condition", + "Long Busy Conditions Maybe Reported", +}; + +/* SCSI Transport Protocols */ +#define SCSI_PROTO_FCP 0 +#define SCSI_PROTO_iSCSI 5 + +static const value_string scsi_proto_val[] = { + {0, "FCP"}, + {5, "iSCSI"}, + {0, NULL}, +}; + +static const value_string scsi_fcp_rrtov_val[] = { + {0, "No Timer Specified"}, + {1, "0.001 secs"}, + {3, "0.1 secs"}, + {5, "10 secs"}, + {0, NULL}, +}; + +static const value_string scsi_sensekey_val[] = { + {0x0, "No Sense"}, + {0x1, "Recovered Error"}, + {0x2, "Not Ready"}, + {0x3, "Medium Error"}, + {0x4, "Hardware Error"}, + {0x5, "Illegal Request"}, + {0x6, "Unit Attention"}, + {0x7, "Data Protection"}, + {0x8, "Blank Check"}, + {0x9, "Vendor Specific"}, + {0xA, "Copy Aborted"}, + {0xB, "Command Aborted"}, + {0xC, "Obsolete Error Code"}, + {0xD, "Overflow Command"}, + {0xE, "Miscompare"}, + {0xF, "Reserved"}, + {0, NULL}, +}; + +static const value_string scsi_sns_errtype_val[] = { + {0x70, "Current Error"}, + {0x71, "Deferred Error"}, + {0x7F, "Vendor Specific"}, + {0, NULL}, +}; + +static const value_string scsi_asc_val[] = { + {0x0000, "No Additional Sense Information"}, + {0x0006, "I/O Process Terminated"}, + {0x0016, "Operation In Progress"}, + {0x0017, "Cleaning Requested"}, + {0x0100, "No Index/Sector Signal"}, + {0x0200, "No Seek Complete"}, + {0x0300, "Peripheral Device Write Fault"}, + {0x0400, "Logical Unit Not Ready, Cause Not Reportable"}, + {0x0401, "Logical Unit Is In Process Of Becoming Ready"}, + {0x0402, "Logical Unit Not Ready, Initializing Cmd. Required"}, + {0x0403, "Logical Unit Not Ready, Manual Intervention Required"}, + {0x0404, "Logical Unit Not Ready, Format In Progress"}, + {0x0405, "Logical Unit Not Ready, Rebuild In Progress"}, + {0x0406, "Logical Unit Not Ready, Recalculation In Progress"}, + {0x0407, "Logical Unit Not Ready, Operation In Progress"}, + {0x0409, "Logical Unit Not Ready, Self-Test In Progress"}, + {0x0500, "Logical Unit Does Not Respond To Selection"}, + {0x0600, "No Reference Position Found"}, + {0x0700, "Multiple Peripheral Devices Selected"}, + {0x0800, "Logical Unit Communication Failure"}, + {0x0801, "Logical Unit Communication Time-Out"}, + {0x0802, "Logical Unit Communication Parity Error"}, + {0x0803, "Logical Unit Communication Crc Error (Ultra-Dma/32)"}, + {0x0804, "Unreachable Copy Target"}, + {0x0900, "Track Following Error"}, + {0x0904, "Head Select Fault"}, + {0x0A00, "Error Log Overflow"}, + {0x0B00, "Warning"}, + {0x0B01, "Warning - Specified Temperature Exceeded"}, + {0x0B02, "Warning - Enclosure Degraded"}, + {0x0C02, "Write Error - Auto Reallocation Failed"}, + {0x0C03, "Write Error - Recommend Reassignment"}, + {0x0C04, "Compression Check Miscompare Error"}, + {0x0C05, "Data Expansion Occurred During Compression"}, + {0x0C06, "Block Not Compressible"}, + {0x0D00, "Error Detected By Third Party Temporary Initiator"}, + {0x0D01, "Third Party Device Failure"}, + {0x0D02, "Copy Target Device Not Reachable"}, + {0x0D03, "Incorrect Copy Target Device Type"}, + {0x0D04, "Copy Target Device Data Underrun"}, + {0x0D05, "Copy Target Device Data Overrun"}, + {0x1000, "Id Crc Or Ecc Error"}, + {0x1100, "Unrecovered Read Error"}, + {0x1101, "Read Retries Exhausted"}, + {0x1102, "Error Too Long To Correct"}, + {0x1103, "Multiple Read Errors"}, + {0x1104, "Unrecovered Read Error - Auto Reallocate Failed"}, + {0x110A, "Miscorrected Error"}, + {0x110B, "Unrecovered Read Error - Recommend Reassignment"}, + {0x110C, "Unrecovered Read Error - Recommend Rewrite The Data"}, + {0x110D, "De-Compression Crc Error"}, + {0x110E, "Cannot Decompress Using Declared Algorithm"}, + {0x1200, "Address Mark Not Found For Id Field"}, + {0x1300, "Address Mark Not Found For Data Field"}, + {0x1400, "Recorded Entity Not Found"}, + {0x1401, "Record Not Found"}, + {0x1405, "Record Not Found - Recommend Reassignment"}, + {0x1406, "Record Not Found - Data Auto-Reallocated"}, + {0x1500, "Random Positioning Error"}, + {0x1501, "Mechanical Positioning Error"}, + {0x1502, "Positioning Error Detected By Read Of Medium"}, + {0x1600, "Data Synchronization Mark Error"}, + {0x1601, "Data Sync Error - Data Rewritten"}, + {0x1602, "Data Sync Error - Recommend Rewrite"}, + {0x1603, "Data Sync Error - Data Auto-Reallocated"}, + {0x1604, "Data Sync Error - Recommend Reassignment"}, + {0x1700, "Recovered Data With No Error Correction Applied"}, + {0x1701, "Recovered Data With Retries"}, + {0x1702, "Recovered Data With Positive Head Offset"}, + {0x1703, "Recovered Data With Negative Head Offset"}, + {0x1705, "Recovered Data Using Previous Sector Id"}, + {0x1706, "Recovered Data Without Ecc - Data Auto-Reallocated"}, + {0x1707, "Recovered Data Without Ecc - Recommend Reassignment"}, + {0x1708, "Recovered Data Without Ecc - Recommend Rewrite"}, + {0x1709, "Recovered Data Without Ecc - Data Rewritten"}, + {0x1800, "Recovered Data With Error Correction Applied"}, + {0x1801, "Recovered Data With Error Corr. & Retries Applied"}, + {0x1802, "Recovered Data - Data Auto-Reallocated"}, + {0x1805, "Recovered Data - Recommend Reassignment"}, + {0x1806, "Recovered Data - Recommend Rewrite"}, + {0x1807, "Recovered Data With Ecc - Data Rewritten"}, + {0x1900, "List Error"}, + {0x1901, "List Not Available"}, + {0x1902, "List Error In Primary List"}, + {0x1903, "List Error In Grown List"}, + {0x1A00, "Parameter List Length Error"}, + {0x1B00, "Synchronous Data Transfer Error"}, + {0x1C00, "Defect List Not Found"}, + {0x1C01, "Primary Defect List Not Found"}, + {0x1C02, "Grown Defect List Not Found"}, + {0x1D00, "Miscompare During Verify Operation"}, + {0x1E00, "Recovered Id With Ecc Correction"}, + {0x1F00, "Defect List Transfer"}, + {0x2000, "Invalid Command Operation Code"}, + {0x2100, "Logical Block Address Out Of Range"}, + {0x2101, "Invalid Element Address"}, + {0x2400, "Invalid Field In Cdb"}, + {0x2401, "Cdb Decryption Error"}, + {0x2500, "Logical Unit Not Supported"}, + {0x2600, "Invalid Field In Parameter List"}, + {0x2601, "Parameter Not Supported"}, + {0x2602, "Parameter Value Invalid"}, + {0x2603, "Threshold Parameters Not Supported"}, + {0x2604, "Invalid Release Of Persistent Reservation"}, + {0x2605, "Data Decryption Error"}, + {0x2606, "Too Many Target Descriptors"}, + {0x2607, "Unsupported Target Descriptor Type Code"}, + {0x2608, "Too Many Segment Descriptors"}, + {0x2609, "Unsupported Segment Descriptor Type Code"}, + {0x260A, "Unexpected Inexact Segment"}, + {0x260B, "Inline Data Length Exceeded"}, + {0x260C, "Invalid Operation For Copy Source Or Destination"}, + {0x260D, "Copy Segment Granularity Violation"}, + {0x2700, "Write Protected"}, + {0x2701, "Hardware Write Protected"}, + {0x2702, "Logical Unit Software Write Protected"}, + {0x2800, "Not Ready To Ready Change, Medium May Have Changed"}, + {0x2801, "Import Or Export Element Accessed"}, + {0x2900, "Power On, Reset, Or Bus Device Reset Occurred"}, + {0x2901, "Power On Occurred"}, + {0x2902, "Scsi Bus Reset Occurred"}, + {0x2903, "Bus Device Reset Function Occurred"}, + {0x2904, "Device Internal Reset"}, + {0x2905, "Transceiver Mode Changed To Single-Ended"}, + {0x2906, "Transceiver Mode Changed To Lvd"}, + {0x2A00, "Parameters Changed"}, + {0x2A01, "Mode Parameters Changed"}, + {0x2A02, "Log Parameters Changed"}, + {0x2A03, "Reservations Preempted"}, + {0x2A04, "Reservations Released"}, + {0x2A05, "Registrations Preempted"}, + {0x2B00, "Copy Cannot Execute Since Host Cannot Disconnect"}, + {0x2C00, "Command Sequence Error"}, + {0x2F00, "Commands Cleared By Another Initiator"}, + {0x3000, "Incompatible Medium Installed"}, + {0x3001, "Cannot Read Medium - Unknown Format"}, + {0x3002, "Cannot Read Medium - Incompatible Format"}, + {0x3003, "Cleaning Cartridge Installed"}, + {0x3004, "Cannot Write Medium - Unknown Format"}, + {0x3005, "Cannot Write Medium - Incompatible Format"}, + {0x3006, "Cannot Format Medium - Incompatible Medium"}, + {0x3007, "Cleaning Failure"}, + {0x3100, "Medium Format Corrupted"}, + {0x3101, "Format Command Failed"}, + {0x3200, "No Defect Spare Location Available"}, + {0x3201, "Defect List Update Failure"}, + {0x3400, "Enclosure Failure"}, + {0x3500, "Enclosure Services Failure"}, + {0x3501, "Unsupported Enclosure Function"}, + {0x3502, "Enclosure Services Unavailable"}, + {0x3503, "Enclosure Services Transfer Failure"}, + {0x3504, "Enclosure Services Transfer Refused"}, + {0x3700, "Rounded Parameter"}, + {0x3900, "Saving Parameters Not Supported"}, + {0x3A00, "Medium Not Present"}, + {0x3A01, "Medium Not Present - Tray Closed"}, + {0x3A02, "Medium Not Present - Tray Open"}, + {0x3A03, "Medium Not Present - Loadable"}, + {0x3A04, "Medium Not Present - Medium Auxiliary Memory Accessible"}, + {0x3B0D, "Medium Destination Element Full"}, + {0x3B0E, "Medium Source Element Empty"}, + {0x3B11, "Medium Magazine Not Accessible"}, + {0x3B12, "Medium Magazine Removed"}, + {0x3B13, "Medium Magazine Inserted"}, + {0x3B14, "Medium Magazine Locked"}, + {0x3B15, "Medium Magazine Unlocked"}, + {0x3D00, "Invalid Bits In Identify Message"}, + {0x3E00, "Logical Unit Has Not Self-Configured Yet"}, + {0x3E01, "Logical Unit Failure"}, + {0x3E02, "Timeout On Logical Unit"}, + {0x3E03, "Logical Unit Failed Self-Test"}, + {0x3E04, "Logical Unit Unable To Update Self-Test Log"}, + {0x3F00, "Target Operating Conditions Have Changed"}, + {0x3F01, "Microcode Has Been Changed"}, + {0x3F02, "Changed Operating Definition"}, + {0x3F03, "Inquiry Data Has Changed"}, + {0x3F04, "Component Device Attached"}, + {0x3F05, "Device Identifier Changed"}, + {0x3F06, "Redundancy Group Created Or Modified"}, + {0x3F07, "Redundancy Group Deleted"}, + {0x3F08, "Spare Created Or Modified"}, + {0x3F09, "Spare Deleted"}, + {0x3F0A, "Volume Set Created Or Modified"}, + {0x3F0B, "Volume Set Deleted"}, + {0x3F0C, "Volume Set Deassigned"}, + {0x3F0D, "Volume Set Reassigned"}, + {0x3F0E, "Reported Luns Data Has Changed"}, + {0x3F0F, "Echo Buffer Overwritten"}, + {0x3F10, "Medium Loadable"}, + {0x3F11, "Medium Auxiliary Memory Accessible"}, + {0x4200, "Self-Test Failure (Should Use 40 Nn)"}, + {0x4300, "Message Error"}, + {0x4400, "Internal Target Failure"}, + {0x4500, "Select Or Reselect Failure"}, + {0x4600, "Unsuccessful Soft Reset"}, + {0x4700, "Scsi Parity Error"}, + {0x4701, "Data Phase Crc Error Detected"}, + {0x4702, "Scsi Parity Error Detected During St Data Phase"}, + {0x4703, "Information Unit Crc Error Detected"}, + {0x4704, "Asynchronous Information Protection Error Detected"}, + {0x4800, "Initiator Detected Error Message Received"}, + {0x4900, "Invalid Message Error"}, + {0x4A00, "Command Phase Error"}, + {0x4B00, "Data Phase Error"}, + {0x4C00, "Logical Unit Failed Self-Configuration"}, + {0x4D00, "Tagged Overlapped Commands (Nn = Queue Tag)"}, + {0x4E00, "Overlapped Commands Attempted"}, + {0x5300, "Media Load Or Eject Failed"}, + {0x5302, "Medium Removal Prevented"}, + {0x5501, "System Buffer Full"}, + {0x5502, "Insufficient Reservation Resources"}, + {0x5503, "Insufficient Resources"}, + {0x5504, "Insufficient Registration Resources"}, + {0x5A00, "Operator Request Or State Change Input"}, + {0x5A01, "Operator Medium Removal Request"}, + {0x5A02, "Operator Selected Write Protect"}, + {0x5A03, "Operator Selected Write Permit"}, + {0x5B00, "Log Exception"}, + {0x5B01, "Threshold Condition Met"}, + {0x5B02, "Log Counter At Maximum"}, + {0x5B03, "Log List Codes Exhausted"}, + {0x5C00, "Change"}, + {0x5C02, "Synchronized"}, + {0x5D00, "Failure Prediction Threshold Exceeded"}, + {0x5D10, "Failure General Hard Drive Failure"}, + {0x5D11, "Failure Drive Error Rate Too High"}, + {0x5D12, "Failure Data Error Rate Too High"}, + {0x5D13, "Failure Seek Error Rate Too High"}, + {0x5D14, "Failure Too Many Block Reassigns"}, + {0x5D15, "Failure Access Times Too High"}, + {0x5D16, "Failure Start Unit Times Too High"}, + {0x5D17, "Failure Channel Parametrics"}, + {0x5D18, "Failure Controller Detected"}, + {0x5D19, "Failure Throughput Performance"}, + {0x5D1A, "Failure Seek Time Performance"}, + {0x5D1B, "Failure Spin-Up Retry Count"}, + {0x5D1C, "Failure Drive Calibration Retry"}, + {0x5D20, "Failure General Hard Drive Failure"}, + {0x5D21, "Failure Drive Error Rate Too High"}, + {0x5D22, "Failure Data Error Rate Too High"}, + {0x5D23, "Failure Seek Error Rate Too High"}, + {0x5D24, "Failure Too Many Block Reassigns"}, + {0x5D25, "Failure Access Times Too High"}, + {0x5D26, "Failure Start Unit Times Too High"}, + {0x5D27, "Failure Channel Parametrics"}, + {0x5D28, "Failure Controller Detected"}, + {0x5D29, "Failure Throughput Performance"}, + {0x5D2A, "Failure Seek Time Performance"}, + {0x5D2B, "Failure Spin-Up Retry Count"}, + {0x5D2C, "Failure Drive Calibration Retry"}, + {0x5D30, "Impending Failure General Hard Drive"}, + {0x5D31, "Impending Failure Drive Error Rate Too High"}, + {0x5D32, "Impending Failure Data Error Rate Too High"}, + {0x5D33, "Impending Failure Seek Error Rate Too High"}, + {0x5D34, "Impending Failure Too Many Block Reassigns"}, + {0x5D35, "Impending Failure Access Times Too High"}, + {0x5D36, "Impending Failure Start Unit Times Too High"}, + {0x5D37, "Impending Failure Channel Parametrics"}, + {0x5D38, "Impending Failure Controller Detected"}, + {0x5D39, "Impending Failure Throughput Performance"}, + {0x5D3A, "Impending Failure Seek Time Performance"}, + {0x5D3B, "Impending Failure Spin-Up Retry Count"}, + {0x5D3C, "Impending Failure Drive Calibration Retry"}, + {0x5D40, "Failure General Hard Drive Failure"}, + {0x5D41, "Failure Drive Error Rate Too High"}, + {0x5D42, "Failure Data Error Rate Too High"}, + {0x5D43, "Failure Seek Error Rate Too High"}, + {0x5D44, "Failure Too Many Block Reassigns"}, + {0x5D45, "Failure Access Times Too High"}, + {0x5D46, "Failure Start Unit Times Too High"}, + {0x5D47, "Failure Channel Parametrics"}, + {0x5D48, "Failure Controller Detected"}, + {0x5D49, "Failure Throughput Performance"}, + {0x5D4A, "Failure Seek Time Performance"}, + {0x5D4B, "Failure Spin-Up Retry Count"}, + {0x5D4C, "Failure Drive Calibration Retry Count"}, + {0x5D50, "Failure General Hard Drive Failure"}, + {0x5D51, "Failure Drive Error Rate Too High"}, + {0x5D52, "Failure Data Error Rate Too High"}, + {0x5D53, "Failure Seek Error Rate Too High"}, + {0x5D54, "Failure Too Many Block Reassigns"}, + {0x5D55, "Failure Access Times Too High"}, + {0x5D56, "Failure Start Unit Times Too High"}, + {0x5D57, "Failure Channel Parametrics"}, + {0x5D58, "Failure Controller Detected"}, + {0x5D59, "Failure Throughput Performance"}, + {0x5D5A, "Failure Seek Time Performance"}, + {0x5D5B, "Failure Spin-Up Retry Count"}, + {0x5D5C, "Failure Drive Calibration Retry Count"}, + {0x5D60, "Failure General Hard Drive Failure"}, + {0x5D61, "Failure Drive Error Rate Too High"}, + {0x5D62, "Failure Data Error Rate Too High"}, + {0x5D63, "Failure Seek Error Rate Too High"}, + {0x5D64, "Failure Too Many Block Reassigns"}, + {0x5D65, "Failure Access Times Too High"}, + {0x5D66, "Failure Start Unit Times Too High"}, + {0x5D67, "Failure Channel Parametrics"}, + {0x5D68, "Failure Controller Detected"}, + {0x5D69, "Failure Throughput Performance"}, + {0x5D6A, "Failure Seek Time Performance"}, + {0x5D6B, "Failure Spin-Up Retry Count"}, + {0x5D6C, "Failure Drive Calibration Retry Count"}, + {0x5DFF, "Failure Prediction Threshold Exceeded (False)"}, + {0x5E00, "Low Power Condition On"}, + {0x5E01, "Idle Condition Activated By Timer"}, + {0x5E02, "Standby Condition Activated By Timer"}, + {0x5E03, "Idle Condition Activated By Command"}, + {0x5E04, "Standby Condition Activated By Command"}, + {0x6500, "Voltage Fault"}, + {0, NULL}, +}; + +/* SCSI Status Codes */ +const value_string scsi_status_val[] = { + {0x00, "Good"}, + {0x02, "Check Condition"}, + {0x04, "Condition Met"}, + {0x08, "Busy"}, + {0x10, "Intermediate"}, + {0x14, "Intermediate Condition Met"}, + {0x18, "Reservation Conflict"}, + {0x28, "Task Set Full"}, + {0x30, "ACA Active"}, + {0x40, "Task Aborted"}, + {0, NULL}, +}; + static gint scsi_def_devtype = SCSI_DEV_SBC; /* The next two structures are used to track SCSI req/rsp */ diff --git a/packet-scsi.h b/packet-scsi.h index 69b72674f7..0a5a024ac7 100644 --- a/packet-scsi.h +++ b/packet-scsi.h @@ -1,7 +1,7 @@ /* packet-scsi.h * Author: Dinesh G Dutt (ddutt@cisco.com) * - * $Id: packet-scsi.h,v 1.1 2002/01/10 01:28:43 guy Exp $ + * $Id: packet-scsi.h,v 1.2 2002/02/12 23:52:34 guy Exp $ * * Ethereal - Network traffic analyzer * By Gerald Combs <gerald@ethereal.com> @@ -25,929 +25,7 @@ #ifndef __PACKET_SCSI_H_ #define __PACKET_SCSI_H_ -typedef guint32 scsi_cmnd_type; -typedef guint32 scsi_device_type; - -/* Valid SCSI Device Types */ -#define SCSI_CMND_SPC2 1 -#define SCSI_CMND_SBC2 2 -#define SCSI_CMND_SSC2 3 - -/* SPC-2 Commands */ - -#define SCSI_SPC2_INQUIRY 0x12 -#define SCSI_SPC2_EXTCOPY 0x83 -#define SCSI_SPC2_LOGSELECT 0x4C -#define SCSI_SPC2_LOGSENSE 0x4D -#define SCSI_SPC2_MODESELECT6 0x15 -#define SCSI_SPC2_MODESELECT10 0x55 -#define SCSI_SPC2_MODESENSE6 0x1A -#define SCSI_SPC2_MODESENSE10 0x5A -#define SCSI_SPC2_PERSRESVIN 0x5E -#define SCSI_SPC2_PERSRESVOUT 0x5F -#define SCSI_SPC2_PREVMEDREMOVAL 0x1E -#define SCSI_SPC2_READBUFFER 0x3C -#define SCSI_SPC2_RCVCOPYRESULTS 0x84 -#define SCSI_SPC2_RCVDIAGRESULTS 0x1C -#define SCSI_SPC2_RELEASE6 0x17 -#define SCSI_SPC2_RELEASE10 0x57 -#define SCSI_SPC2_REPORTDEVICEID 0xA3 -#define SCSI_SPC2_REPORTLUNS 0xA0 -#define SCSI_SPC2_REQSENSE 0x03 -#define SCSI_SPC2_RESERVE6 0x16 -#define SCSI_SPC2_RESERVE10 0x56 -#define SCSI_SPC2_SENDDIAG 0x1D -#define SCSI_SPC2_SETDEVICEID 0xA4 -#define SCSI_SPC2_TESTUNITRDY 0x00 -#define SCSI_SPC2_WRITEBUFFER 0x3B - -static const value_string scsi_spc2_val[] = { - {SCSI_SPC2_EXTCOPY , "Extended Copy"}, - {SCSI_SPC2_INQUIRY , "Inquiry"}, - {SCSI_SPC2_LOGSELECT , "Log Select"}, - {SCSI_SPC2_LOGSENSE , "Log Sense"}, - {SCSI_SPC2_MODESELECT6 , "Mode Select (6)"}, - {SCSI_SPC2_MODESELECT10 , "Mode Select (10)"}, - {SCSI_SPC2_MODESENSE6 , "Mode Sense (6)"}, - {SCSI_SPC2_MODESENSE10 , "Mode Sense (10)"}, - {SCSI_SPC2_PERSRESVIN , "Persistent Reserve In"}, - {SCSI_SPC2_PERSRESVOUT , "Persistent Reserve Out"}, - {SCSI_SPC2_PREVMEDREMOVAL , "Prevent Allow Medium Removal"}, - {SCSI_SPC2_RCVCOPYRESULTS , "Receive Copy Results"}, - {SCSI_SPC2_RCVDIAGRESULTS , "Receive Diagnostics Results"}, - {SCSI_SPC2_READBUFFER , "Read Buffer"}, - {SCSI_SPC2_RELEASE6 , "Release (6)"}, - {SCSI_SPC2_RELEASE10 , "Release (10)"}, - {SCSI_SPC2_REPORTDEVICEID , "Report Device ID"}, - {SCSI_SPC2_REPORTLUNS , "Report LUNs"}, - {SCSI_SPC2_REQSENSE , "Request Sense"}, - {SCSI_SPC2_RESERVE6 , "Reserve (6)"}, - {SCSI_SPC2_RESERVE10 , "Reserve (10)"}, - {SCSI_SPC2_TESTUNITRDY , "Test Unit Ready"}, - {SCSI_SPC2_WRITEBUFFER , "Write Buffer"}, - {0, NULL}, -}; - -/* SBC-2 Commands */ -#define SCSI_SBC2_FORMATUNIT 0x04 -#define SCSI_SBC2_LOCKUNLKCACHE10 0x36 -#define SCSI_SPC2_LOCKUNLKCACHE16 0x92 -#define SCSI_SBC2_PREFETCH10 0x34 -#define SCSI_SBC2_PREFETCH16 0x90 -#define SCSI_SBC2_READ6 0x08 -#define SCSI_SBC2_READ10 0x28 -#define SCSI_SBC2_READ12 0xA8 -#define SCSI_SBC2_READ16 0x88 -#define SCSI_SBC2_READCAPACITY 0x25 -#define SCSI_SBC2_READDEFDATA10 0x37 -#define SCSI_SBC2_READDEFDATA12 0xB7 -#define SCSI_SBC2_READLONG 0x3E -#define SCSI_SBC2_REASSIGNBLKS 0x07 -#define SCSI_SBC2_REBUILD16 0x81 -#define SCSI_SBC2_REBUILD32 0x7F -#define SCSI_SBC2_REGENERATE16 0x82 -#define SCSI_SBC2_REGENERATE32 0x7F -#define SCSI_SBC2_SEEK10 0x2B -#define SCSI_SBC2_SETLIMITS10 0x33 -#define SCSI_SBC2_SETLIMITS12 0xB3 -#define SCSI_SBC2_STARTSTOPUNIT 0x1B -#define SCSI_SBC2_SYNCCACHE10 0x35 -#define SCSI_SBC2_SYNCCACHE16 0x91 -#define SCSI_SBC2_VERIFY10 0x2F -#define SCSI_SBC2_VERIFY12 0xAF -#define SCSI_SBC2_VERIFY16 0x8F -#define SCSI_SBC2_WRITE6 0x0A -#define SCSI_SBC2_WRITE10 0x2A -#define SCSI_SBC2_WRITE12 0xAA -#define SCSI_SBC2_WRITE16 0x8A -#define SCSI_SBC2_WRITENVERIFY10 0x2E -#define SCSI_SBC2_WRITENVERIFY12 0xAE -#define SCSI_SBC2_WRITENVERIFY16 0x8E -#define SCSI_SBC2_WRITELONG 0x3F -#define SCSI_SBC2_WRITESAME10 0x41 -#define SCSI_SBC2_WRITESAME16 0x93 -#define SCSI_SBC2_XDREAD10 0x52 -#define SCSI_SBC2_XDREAD32 0x7F -#define SCSI_SBC2_XDWRITE10 0x50 -#define SCSI_SBC2_XDWRITE32 0x7F -#define SCSI_SBC2_XDWRITEREAD10 0x53 -#define SCSI_SBC2_XDWRITEREAD32 0x7F -#define SCSI_SBC2_XDWRITEEXTD16 0x80 -#define SCSI_SBC2_XDWRITEEXTD32 0x7F -#define SCSI_SBC2_XPWRITE10 0x51 -#define SCSI_SBC2_XPWRITE32 0x7F - - -static const value_string scsi_sbc2_val[] = { - {SCSI_SBC2_FORMATUNIT , "Format Unit"}, - {SCSI_SBC2_LOCKUNLKCACHE10, "Lock Unlock Cache (10)"}, - {SCSI_SPC2_LOCKUNLKCACHE16, "Lock Unlock Cache (16)"}, - {SCSI_SBC2_PREFETCH10, "Pre-Fetch (10)"}, - {SCSI_SBC2_PREFETCH16, "Pre-Fetch (16)"}, - {SCSI_SBC2_READ6 , "Read (6)"}, - {SCSI_SBC2_READ10 , "Read (10)"}, - {SCSI_SBC2_READ12 , "Read (12)"}, - {SCSI_SBC2_READ16 , "Read (16)"}, - {SCSI_SBC2_READCAPACITY , "Read Capacity"}, - {SCSI_SBC2_READDEFDATA10 , "Read Defect Data (10)"}, - {SCSI_SBC2_READDEFDATA12 , "Read Defect Data (12)"}, - {SCSI_SBC2_READLONG, "Read Long"}, - {SCSI_SBC2_REASSIGNBLKS , "Reassign Blocks"}, - {SCSI_SBC2_REBUILD16, "Rebuild (16)"}, - {SCSI_SBC2_REBUILD32, "Rebuild (32)"}, - {SCSI_SBC2_REGENERATE16, "Regenerate (16)"}, - {SCSI_SBC2_REGENERATE32, "Regenerate (32)"}, - {SCSI_SBC2_SEEK10, "Seek (10)"}, - {SCSI_SBC2_SETLIMITS10, "Set Limits (10)"}, - {SCSI_SBC2_SETLIMITS12, "Set Limits (12)"}, - {SCSI_SBC2_STARTSTOPUNIT, "Start Stop Unit"}, - {SCSI_SBC2_SYNCCACHE10, "Synchronize Cache (10)"}, - {SCSI_SBC2_SYNCCACHE16, "Synchronize Cache (16)"}, - {SCSI_SBC2_VERIFY10, "Verify (10)"}, - {SCSI_SBC2_VERIFY12, "Verify (12)"}, - {SCSI_SBC2_VERIFY16, "Verify (16)"}, - {SCSI_SBC2_WRITE6 , "Write (6)"}, - {SCSI_SBC2_WRITE10 , "Write (10)"}, - {SCSI_SBC2_WRITE12 , "Write (12)"}, - {SCSI_SBC2_WRITE16 , "Write (16)"}, - {SCSI_SBC2_WRITENVERIFY10, "Write & Verify (10)"}, - {SCSI_SBC2_WRITENVERIFY12, "Write & Verify (12)"}, - {SCSI_SBC2_WRITENVERIFY16, "Write & Verify (16)"}, - {SCSI_SBC2_WRITELONG, "Write Long"}, - {SCSI_SBC2_WRITESAME10, "Write Same (10)"}, - {SCSI_SBC2_WRITESAME16, "Write Same (16)"}, - {SCSI_SBC2_XDREAD10, "XdRead (10)"}, - {SCSI_SBC2_XDREAD32, "XdRead (32)"}, - {SCSI_SBC2_XDWRITE10, "XdWrite (10)"}, - {SCSI_SBC2_XDWRITE32, "XdWrite(32)"}, - {SCSI_SBC2_XDWRITEREAD10, "XdWriteRead (10)"}, - {SCSI_SBC2_XDWRITEREAD32, "XdWriteRead (32)"}, - {SCSI_SBC2_XDWRITEEXTD16, "XdWrite Extended (16)"}, - {SCSI_SBC2_XDWRITEEXTD32, "XdWrite Extended (32)"}, - {SCSI_SBC2_XPWRITE10, "XpWrite (10)"}, - {SCSI_SBC2_XPWRITE32, "XpWrite (32)"}, - {0, NULL}, -}; - -/* SSC2 Commands */ -#define SCSI_SSC2_ERASE_16 0x93 -#define SCSI_SSC2_FORMAT_MEDIUM 0x04 -#define SCSI_SSC2_LOAD_UNLOAD 0x1B -#define SCSI_SSC2_LOCATE_16 0x92 -#define SCSI_SSC2_MOVE_MEDIUM 0xA5 -#define SCSI_SSC2_MOVE_MEDIUM_ATTACHED 0xA7 -#define SCSI_SSC2_READ_16 0x88 -#define SCSI_SSC2_READ_BLOCK_LIMITS 0x05 -#define SCSI_SSC2_READ_ELEMENT_STATUS 0xB8 -#define SCSI_SSC2_READ_ELEMENT_STATUS_ATTACHED 0xB4 -#define SCSI_SSC2_READ_POSITION 0x34 -#define SCSI_SSC2_READ_REVERSE_16 0x81 -#define SCSI_SSC2_RECOVER_BUFFERED_DATA 0x14 -#define SCSI_SSC2_REPORT_DENSITY_SUPPORT 0x44 -#define SCSI_SSC2_REWIND 0x01 -#define SCSI_SSC2_SET_CAPACITY 0x0B -#define SCSI_SSC2_SPACE_16 0x91 -#define SCSI_SSC2_VERIFY_16 0x8F -#define SCSI_SSC2_WRITE_16 0x8A -#define SCSI_SSC2_WRITE_FILEMARKS_16 0x80 -#define SCSI_SSC2_ERASE_6 0x19 -#define SCSI_SSC2_LOCATE_10 0x2B -#define SCSI_SSC2_LOCATE_16 0x92 -#define SCSI_SSC2_READ_6 0x08 -#define SCSI_SSC2_READ_REVERSE_6 0x0F -#define SCSI_SSC2_SPACE_6 0x11 -#define SCSI_SSC2_VERIFY_6 0x13 -#define SCSI_SSC2_WRITE_6 0x0A -#define SCSI_SSC2_WRITE_FILEMARKS_6 0x10 - -static const value_string scsi_ssc2_val[] = { - {SCSI_SSC2_ERASE_16 , "Erase(16)"}, - {SCSI_SSC2_FORMAT_MEDIUM , "Format Medium"}, - {SCSI_SSC2_LOAD_UNLOAD , "Load Unload"}, - {SCSI_SSC2_LOCATE_16 , "Locate(16)"}, - {SCSI_SSC2_MOVE_MEDIUM , "Move Medium"}, - {SCSI_SSC2_MOVE_MEDIUM_ATTACHED , "Move Medium Attached"}, - {SCSI_SSC2_READ_16 , "Read(16)"}, - {SCSI_SSC2_READ_BLOCK_LIMITS , "Read Block Limits"}, - {SCSI_SSC2_READ_ELEMENT_STATUS , "Read Element Status"}, - {SCSI_SSC2_READ_ELEMENT_STATUS_ATTACHED, "Read Element Status Attached"}, - {SCSI_SSC2_READ_POSITION , "Read Position"}, - {SCSI_SSC2_READ_REVERSE_16 , "Read Reverse(16)"}, - {SCSI_SSC2_RECOVER_BUFFERED_DATA , "Recover Buffered Data"}, - {SCSI_SSC2_REPORT_DENSITY_SUPPORT , "Report Density Support"}, - {SCSI_SSC2_REWIND , "Rewind"}, - {SCSI_SSC2_SET_CAPACITY , "Set Capacity"}, - {SCSI_SSC2_SPACE_16 , "Space(16)"}, - {SCSI_SSC2_VERIFY_16 , "Verify(16)"}, - {SCSI_SSC2_WRITE_16 , "Write(16)"}, - {SCSI_SSC2_WRITE_FILEMARKS_16 , "Write Filemarks(16)"}, - {SCSI_SSC2_ERASE_6 , "Erase(6)"}, - {SCSI_SSC2_LOCATE_10 , "Locate(10)"}, - {SCSI_SSC2_LOCATE_16 , "Locate(16)"}, - {SCSI_SSC2_READ_6 , "Read(6)"}, - {SCSI_SSC2_READ_REVERSE_6 , "Read Reverse(6)"}, - {SCSI_SSC2_SPACE_6 , "Space(6)"}, - {SCSI_SSC2_VERIFY_6 , "Verify(6)"}, - {SCSI_SSC2_WRITE_6 , "Write(6)"}, - {SCSI_SSC2_WRITE_FILEMARKS_6 , "Write Filemarks(6)"}, -}; - -static const value_string scsi_evpd_pagecode_val[] = { - {0x00, "Supported Vital Data Product Pages"}, - {0x80, "Unit Serial Number Page"}, - {0x82, "ASCII Implemented Operating Definition Page"}, - {0x01, "ASCII Information Page"}, - {0x02, "ASCII Information Page"}, - {0x03, "ASCII Information Page"}, - {0x04, "ASCII Information Page"}, - {0x05, "ASCII Information Page"}, - {0x06, "ASCII Information Page"}, - {0x07, "ASCII Information Page"}, - {0x83, "Device Identification Page"}, - {0, NULL}, -}; - -static const value_string scsi_logsel_pc_val[] = { - {0, "Current Threshold Values"}, - {1, "Current Cumulative Values"}, - {2, "Default Threshold Values"}, - {3, "Default Cumulative Values"}, - {0, NULL}, -}; - -static const value_string scsi_logsns_pc_val[] = { - {0, "Threshold Values"}, - {1, "Cumulative Values"}, - {2, "Default Threshold Values"}, - {3, "Default Cumulative Values"}, - {0, NULL}, -}; - -static const value_string scsi_logsns_page_val[] = { - {0xF, "Application Client Page"}, - {0x1, "Buffer Overrun/Underrun Page"}, - {0x3, "Error Counter (read) Page"}, - {0x4, "Error Counter (read reverse) Page"}, - {0x5, "Error Counter (verify) Page"}, - {0x1, "Error Counter (write) Page"}, - {0xB, "Last n Deferred Errors or Async Events Page"}, - {0x7, "Last n Error Events Page"}, - {0x6, "Non-medium Error Page"}, - {0x10, "Self-test Results Page"}, - {0xE, "Start-Stop Cycle Counter Page"}, - {0x0, "Supported Log Pages"}, - {0xD, "Temperature Page"}, - {0, NULL}, -}; - -static const value_string scsi_modesns_pc_val[] = { - {0, "Current Values"}, - {1, "Changeable Values"}, - {2, "Default Values"}, - {3, "Saved Values"}, - {0, NULL}, -}; - -#define SCSI_MODEPAGE_VEND 0x0 -#define SCSI_MODEPAGE_CTL 0x0A -#define SCSI_MODEPAGE_DISCON 0x02 -#define SCSI_MODEPAGE_INFOEXCP 0x1C -#define SCSI_MODEPAGE_PWR 0x1A -#define SCSI_MODEPAGE_LUN 0x18 -#define SCSI_MODEPAGE_PORT 0x19 -#define SCSI_MODEPAGE_RDWRERR 0x01 -#define SCSI_MODEPAGE_FMTDEV 0x03 -#define SCSI_MODEPAGE_DISKGEOM 0x04 -#define SCSI_MODEPAGE_FLEXDISK 0x05 -#define SCSI_MODEPAGE_VERERR 0x07 -#define SCSI_MODEPAGE_CACHE 0x08 -#define SCSI_MODEPAGE_PERDEV 0x09 -#define SCSI_MODEPAGE_MEDTYPE 0x0B -#define SCSI_MODEPAGE_NOTPART 0x0C -#define SCSI_MODEPAGE_XORCTL 0x10 - -static const value_string scsi_modesns_page_val[] = { - {0, "Vendor Specific Page"}, - {0x0A, "Control"}, - {0x02, "Disconnect-Reconnect"}, - {0x1C, "Informational Exceptions Control"}, - {0x1A, "Power Condition"}, - {0x18, "Protocol Specific LUN"}, - {0x19, "Protocol-Specific Port"}, - {0x01, "Read/Write Error Recovery"}, - {0x03, "Format Device"}, - {0x04, "Rigid Disk Geometry"}, - {0x05, "Flexible Disk"}, - {0x07, "Verify Error Recovery"}, - {0x08, "Caching"}, - {0x09, "Peripheral Device"}, - {0x0B, "Medium Types Supported"}, - {0x0C, "Notch & Partition"}, - {0x10, "XOR Control"}, - {0x3F, "Return All Mode Pages"}, - {0, NULL}, -}; - -#define SCSI_SPC2_RESVIN_SVCA_RDKEYS 0 -#define SCSI_SPC2_RESVIN_SVCA_RDRESV 1 - -static const value_string scsi_persresvin_svcaction_val[] = { - {SCSI_SPC2_RESVIN_SVCA_RDKEYS, "Read Keys"}, - {SCSI_SPC2_RESVIN_SVCA_RDRESV, "Read Reservation"}, - {0, NULL}, -}; - -static const value_string scsi_persresvout_svcaction_val[] = { - {0, "Register"}, - {1, "Reserve"}, - {2, "Release"}, - {3, "Clear"}, - {4, "Preempt"}, - {5, "Preempt & Abort"}, - {6, "Register & Ignore Existing Key"}, - {0, NULL}, -}; - -static const value_string scsi_persresv_scope_val[] = { - {0, "LU Scope"}, - {1, "Obsolete"}, - {2, "Element Scope"}, - {0, NULL}, -}; - -static const value_string scsi_persresv_type_val[] = { - {1, "Write Excl"}, - {3, "Excl Access"}, - {5, "Write Excl, Registrants Only"}, - {7, "Excl Access, Registrants Only"}, - {0, NULL}, -}; - -/* SCSI Device Types */ -#define SCSI_DEV_SBC 0x0 -#define SCSI_DEV_SSC 0x1 -#define SCSI_DEV_PRNT 0x2 -#define SCSI_DEV_PROC 0x3 -#define SCSI_DEV_WORM 0x4 -#define SCSI_DEV_CDROM 0x5 -#define SCSI_DEV_SCAN 0x6 -#define SCSI_DEV_OPTMEM 0x7 -#define SCSI_DEV_SMC 0x8 -#define SCSI_DEV_COMM 0x9 -#define SCSI_DEV_RAID 0xC -#define SCSI_DEV_SES 0xD -#define SCSI_DEV_RBC 0xE -#define SCSI_DEV_OCRW 0xF -#define SCSI_DEV_OSD 0x11 - -static const value_string scsi_devtype_val[] = { - {SCSI_DEV_SBC , "Direct Access Device"}, - {SCSI_DEV_SSC , "Sequential Access Device"}, - {SCSI_DEV_PRNT , "Printer"}, - {SCSI_DEV_PROC , "Processor"}, - {SCSI_DEV_WORM , "WORM"}, - {SCSI_DEV_CDROM , "CD ROM"}, - {SCSI_DEV_SCAN , "Scanner"}, - {SCSI_DEV_OPTMEM, "Optical Memory"}, - {SCSI_DEV_SMC , "Medium Changer"}, - {SCSI_DEV_COMM , "Communication"}, - {SCSI_DEV_RAID , "Storage Array"}, - {SCSI_DEV_SES , "Enclosure Services"}, - {SCSI_DEV_RBC , "Simplified Block Device"}, - {SCSI_DEV_OCRW , "OCRW"}, - {SCSI_DEV_OSD , "OSD"}, - {0, NULL}, -}; - -static const enum_val_t scsi_devtype_options[] = { - {"Block Device", SCSI_DEV_SBC}, - {"Sequential Device", SCSI_DEV_SSC}, - {NULL, -1}, -}; - -static const value_string scsi_inquiry_vers_val[] = { - {0, "No Compliance to any Standard"}, - {2, "Compliance to ANSI X3.131:1994"}, - {3, "Compliance to ANSI X3.301:1997"}, - {4, "Compliance to SPC-2"}, - {0x80, "Compliance to ISO/IEC 9316:1995"}, - {0x82, "Compliance to ISO/IEC 9316:1995 and to ANSI X3.131:1994"}, - {0x83, "Compliance to ISO/IEC 9316:1995 and to ANSI X3.301:1997"}, - {0x84, "Compliance to ISO/IEC 9316:1995 and SPC-2"}, - {0, NULL}, -}; - -static const value_string scsi_modesense_medtype_val[] = { - {0, "Default"}, - {1, "Flexible Disk, Single-sided"}, - {2, "Flexible Disk, Double-sided"}, - {0, NULL}, -}; - -static const value_string scsi_verdesc_val[] = { - {0x0d40, "FC-AL (No Version)"}, - {0x0d5c, "FC-AL ANSI X3.272:1996"}, - {0x0d60, "FC-AL-2 (no version claimed)"}, - {0x0d7c, "FC-AL-2 ANSI NCITS.332:1999"}, - {0x0d61, "FC-AL-2 T11/1133 revision 7.0"}, - {0x1320, "FC-FLA (no version claimed)"}, - {0x133c, "FC-FLA ANSI NCITS TR-20:1998"}, - {0x133b, "FC-FLA T11/1235 revision 7"}, - {0x0da0, "FC-FS (no version claimed)"}, - {0x0db7, "FC-FS T11/1331 revision 1.2"}, - {0x08c0, "FCP (no version claimed)"}, - {0x08dc, "FCP ANSI X3.269:1996"}, - {0x08db, "FCP T10/0993 revision 12"}, - {0x1340, "FC-PLDA (no version claimed)"}, - {0x135c, "FC-PLDA ANSI NCITS TR-19:1998"}, - {0x135b, "FC-PLDA T11/1162 revision 2.1"}, - {0x0900, "FCP-2 (no version claimed)"}, - {0x0901, "FCP-2 T10/1144 revision 4"}, - {0x003c, "SAM ANSI X3.270:1996"}, - {0x003b, "SAM T10/0994 revision 18"}, - {0x0040, "SAM-2 (no version claimed)"}, - {0x0020, "SAM (no version claimed)"}, - {0x0180, "SBC (no version claimed)"}, - {0x019c, "SBC ANSI NCITS.306:1998"}, - {0x019b, "SBC T10/0996 revision 08c"}, - {0x0320, "SBC-2 (no version claimed)"}, - {0x01c0, "SES (no version claimed)"}, - {0x01dc, "SES ANSI NCITS.305:1998"}, - {0x01db, "SES T10/1212 revision 08b"}, - {0x01de, "SES ANSI NCITS.305:1998 w/ Amendment ANSI NCITS.305/AM1:2000"}, - {0x01dd, "SES T10/1212 revision 08b w/ Amendment ANSI NCITS.305/AM1:2000"}, - {0x0120, "SPC (no version claimed)"}, - {0x013c, "SPC ANSI X3.301:1997"}, - {0x013b, "SPC T10/0995 revision 11a"}, - {0x0260, "SPC-2 (no version claimed)"}, - {0x0267, "SPC-2 T10/1236 revision 12"}, - {0x0269, "SPC-2 T10/1236 revision 18"}, - {0x0300, "SPC-3 (no version claimed)"}, - {0x0960, "iSCSI (no version claimed)"}, - {0x0d80, "FC-PH-3 (no version claimed)"}, - {0x0d9c, "FC-PH-3 ANSI X3.303-1998"}, - {0x0d20, "FC-PH (no version claimed)"}, - {0, NULL}, -}; - -#define SCSI_EVPD_SUPPPG 0 -#define SCSI_EVPD_ASCIIOPER 0x82 -#define SCSI_EVPD_DEVID 0x83 -#define SCSI_EVPD_DEVSERNUM 0x80 - -static const value_string scsi_inq_evpd_val[] = { - {SCSI_EVPD_SUPPPG, "Supported Vital Product Data Page"}, - {SCSI_EVPD_ASCIIOPER, "ASCII Implemented Operating Definition Page"}, - {SCSI_EVPD_DEVID, "Device ID Page"}, - {SCSI_EVPD_DEVSERNUM, "Unit Serial Number Page"}, - {0x0, NULL}, -}; - -/* Command Support Data "Support" field definitions */ -static const value_string scsi_cmdt_supp_val[] = { - {0, "Data not currently available"}, - {1, "SCSI Command not supported"}, - {2, "Reserved"}, - {3, "SCSI Command supported in conformance with a SCSI standard"}, - {4, "Vendor Specific"}, - {5, "SCSI Command supported in a vendor specific manner"}, - {6, "Vendor Specific"}, - {7, "Reserved"}, - {0, NULL}, -}; - -static const value_string scsi_devid_codeset_val[] = { - {0, "Reserved"}, - {1, "Identifier field contains binary values"}, - {2, "Identifier field contains ASCII graphic codes"}, - {0, NULL}, -}; - -static const value_string scsi_devid_assoc_val[] = { - {0, "Identifier is associated with addressed logical/physical device"}, - {1, "Identifier is associated with the port that received the request"}, - {0, NULL}, -}; - -static const value_string scsi_devid_idtype_val[] = { - {0, "Vendor-specific ID (non-globally unique)"}, - {1, "Vendor-ID + vendor-specific ID (globally unique)"}, - {2, "EUI-64 ID"}, - {3, "WWN"}, - {4, "4-byte Binary Number/Reserved"}, - {0, NULL}, -}; - -static const value_string scsi_modesns_mrie_val[] = { - {0, "No Reporting of Informational Exception Condition"}, - {1, "Asynchronous Error Reporting"}, - {2, "Generate Unit Attention"}, - {3, "Conditionally Generate Recovered Error"}, - {4, "Unconditionally Generate Recovered Error"}, - {5, "Generate No Sense"}, - {6, "Only Report Informational Exception Condition on Request"}, - {0, NULL}, -}; - -static const value_string scsi_modesns_tst_val[] = { - {0, "Task Set Per LU For All Initiators"}, - {1, "Task Set Per Initiator Per LU"}, - {0, NULL}, -}; - -static const value_string scsi_modesns_qmod_val[] = { - {0, "Restricted reordering"}, - {1, "Unrestricted reordering"}, - {0, NULL}, -}; - -static const true_false_string scsi_modesns_qerr_val = { - "All blocked tasks shall be aborted on CHECK CONDITION", - "Blocked tasks shall resume after ACA/CA is cleared", -}; - -static const true_false_string scsi_modesns_tas_val = { - "Terminated tasks aborted without informing initiators", - "Tasks aborted by another initiator terminated with TASK ABORTED", -}; - -static const true_false_string scsi_modesns_rac_val = { - "Report a CHECK CONDITION Instead of Long Busy Condition", - "Long Busy Conditions Maybe Reported", -}; - -/* SCSI Transport Protocols */ -#define SCSI_PROTO_FCP 0 -#define SCSI_PROTO_iSCSI 5 - -static const value_string scsi_proto_val[] = { - {0, "FCP"}, - {5, "iSCSI"}, - {0, NULL}, -}; - -static const value_string scsi_fcp_rrtov_val[] = { - {0, "No Timer Specified"}, - {1, "0.001 secs"}, - {3, "0.1 secs"}, - {5, "10 secs"}, - {0, NULL}, -}; - -static const value_string scsi_sensekey_val[] = { - {0x0, "No Sense"}, - {0x1, "Recovered Error"}, - {0x2, "Not Ready"}, - {0x3, "Medium Error"}, - {0x4, "Hardware Error"}, - {0x5, "Illegal Request"}, - {0x6, "Unit Attention"}, - {0x7, "Data Protection"}, - {0x8, "Blank Check"}, - {0x9, "Vendor Specific"}, - {0xA, "Copy Aborted"}, - {0xB, "Command Aborted"}, - {0xC, "Obsolete Error Code"}, - {0xD, "Overflow Command"}, - {0xE, "Miscompare"}, - {0xF, "Reserved"}, - {0, NULL}, -}; - -static const value_string scsi_sns_errtype_val[] = { - {0x70, "Current Error"}, - {0x71, "Deferred Error"}, - {0x7F, "Vendor Specific"}, - {0, NULL}, -}; - -static const value_string scsi_asc_val[] = { - {0x0000, "No Additional Sense Information"}, - {0x0006, "I/O Process Terminated"}, - {0x0016, "Operation In Progress"}, - {0x0017, "Cleaning Requested"}, - {0x0100, "No Index/Sector Signal"}, - {0x0200, "No Seek Complete"}, - {0x0300, "Peripheral Device Write Fault"}, - {0x0400, "Logical Unit Not Ready, Cause Not Reportable"}, - {0x0401, "Logical Unit Is In Process Of Becoming Ready"}, - {0x0402, "Logical Unit Not Ready, Initializing Cmd. Required"}, - {0x0403, "Logical Unit Not Ready, Manual Intervention Required"}, - {0x0404, "Logical Unit Not Ready, Format In Progress"}, - {0x0405, "Logical Unit Not Ready, Rebuild In Progress"}, - {0x0406, "Logical Unit Not Ready, Recalculation In Progress"}, - {0x0407, "Logical Unit Not Ready, Operation In Progress"}, - {0x0409, "Logical Unit Not Ready, Self-Test In Progress"}, - {0x0500, "Logical Unit Does Not Respond To Selection"}, - {0x0600, "No Reference Position Found"}, - {0x0700, "Multiple Peripheral Devices Selected"}, - {0x0800, "Logical Unit Communication Failure"}, - {0x0801, "Logical Unit Communication Time-Out"}, - {0x0802, "Logical Unit Communication Parity Error"}, - {0x0803, "Logical Unit Communication Crc Error (Ultra-Dma/32)"}, - {0x0804, "Unreachable Copy Target"}, - {0x0900, "Track Following Error"}, - {0x0904, "Head Select Fault"}, - {0x0A00, "Error Log Overflow"}, - {0x0B00, "Warning"}, - {0x0B01, "Warning - Specified Temperature Exceeded"}, - {0x0B02, "Warning - Enclosure Degraded"}, - {0x0C02, "Write Error - Auto Reallocation Failed"}, - {0x0C03, "Write Error - Recommend Reassignment"}, - {0x0C04, "Compression Check Miscompare Error"}, - {0x0C05, "Data Expansion Occurred During Compression"}, - {0x0C06, "Block Not Compressible"}, - {0x0D00, "Error Detected By Third Party Temporary Initiator"}, - {0x0D01, "Third Party Device Failure"}, - {0x0D02, "Copy Target Device Not Reachable"}, - {0x0D03, "Incorrect Copy Target Device Type"}, - {0x0D04, "Copy Target Device Data Underrun"}, - {0x0D05, "Copy Target Device Data Overrun"}, - {0x1000, "Id Crc Or Ecc Error"}, - {0x1100, "Unrecovered Read Error"}, - {0x1101, "Read Retries Exhausted"}, - {0x1102, "Error Too Long To Correct"}, - {0x1103, "Multiple Read Errors"}, - {0x1104, "Unrecovered Read Error - Auto Reallocate Failed"}, - {0x110A, "Miscorrected Error"}, - {0x110B, "Unrecovered Read Error - Recommend Reassignment"}, - {0x110C, "Unrecovered Read Error - Recommend Rewrite The Data"}, - {0x110D, "De-Compression Crc Error"}, - {0x110E, "Cannot Decompress Using Declared Algorithm"}, - {0x1200, "Address Mark Not Found For Id Field"}, - {0x1300, "Address Mark Not Found For Data Field"}, - {0x1400, "Recorded Entity Not Found"}, - {0x1401, "Record Not Found"}, - {0x1405, "Record Not Found - Recommend Reassignment"}, - {0x1406, "Record Not Found - Data Auto-Reallocated"}, - {0x1500, "Random Positioning Error"}, - {0x1501, "Mechanical Positioning Error"}, - {0x1502, "Positioning Error Detected By Read Of Medium"}, - {0x1600, "Data Synchronization Mark Error"}, - {0x1601, "Data Sync Error - Data Rewritten"}, - {0x1602, "Data Sync Error - Recommend Rewrite"}, - {0x1603, "Data Sync Error - Data Auto-Reallocated"}, - {0x1604, "Data Sync Error - Recommend Reassignment"}, - {0x1700, "Recovered Data With No Error Correction Applied"}, - {0x1701, "Recovered Data With Retries"}, - {0x1702, "Recovered Data With Positive Head Offset"}, - {0x1703, "Recovered Data With Negative Head Offset"}, - {0x1705, "Recovered Data Using Previous Sector Id"}, - {0x1706, "Recovered Data Without Ecc - Data Auto-Reallocated"}, - {0x1707, "Recovered Data Without Ecc - Recommend Reassignment"}, - {0x1708, "Recovered Data Without Ecc - Recommend Rewrite"}, - {0x1709, "Recovered Data Without Ecc - Data Rewritten"}, - {0x1800, "Recovered Data With Error Correction Applied"}, - {0x1801, "Recovered Data With Error Corr. & Retries Applied"}, - {0x1802, "Recovered Data - Data Auto-Reallocated"}, - {0x1805, "Recovered Data - Recommend Reassignment"}, - {0x1806, "Recovered Data - Recommend Rewrite"}, - {0x1807, "Recovered Data With Ecc - Data Rewritten"}, - {0x1900, "List Error"}, - {0x1901, "List Not Available"}, - {0x1902, "List Error In Primary List"}, - {0x1903, "List Error In Grown List"}, - {0x1A00, "Parameter List Length Error"}, - {0x1B00, "Synchronous Data Transfer Error"}, - {0x1C00, "Defect List Not Found"}, - {0x1C01, "Primary Defect List Not Found"}, - {0x1C02, "Grown Defect List Not Found"}, - {0x1D00, "Miscompare During Verify Operation"}, - {0x1E00, "Recovered Id With Ecc Correction"}, - {0x1F00, "Defect List Transfer"}, - {0x2000, "Invalid Command Operation Code"}, - {0x2100, "Logical Block Address Out Of Range"}, - {0x2101, "Invalid Element Address"}, - {0x2400, "Invalid Field In Cdb"}, - {0x2401, "Cdb Decryption Error"}, - {0x2500, "Logical Unit Not Supported"}, - {0x2600, "Invalid Field In Parameter List"}, - {0x2601, "Parameter Not Supported"}, - {0x2602, "Parameter Value Invalid"}, - {0x2603, "Threshold Parameters Not Supported"}, - {0x2604, "Invalid Release Of Persistent Reservation"}, - {0x2605, "Data Decryption Error"}, - {0x2606, "Too Many Target Descriptors"}, - {0x2607, "Unsupported Target Descriptor Type Code"}, - {0x2608, "Too Many Segment Descriptors"}, - {0x2609, "Unsupported Segment Descriptor Type Code"}, - {0x260A, "Unexpected Inexact Segment"}, - {0x260B, "Inline Data Length Exceeded"}, - {0x260C, "Invalid Operation For Copy Source Or Destination"}, - {0x260D, "Copy Segment Granularity Violation"}, - {0x2700, "Write Protected"}, - {0x2701, "Hardware Write Protected"}, - {0x2702, "Logical Unit Software Write Protected"}, - {0x2800, "Not Ready To Ready Change, Medium May Have Changed"}, - {0x2801, "Import Or Export Element Accessed"}, - {0x2900, "Power On, Reset, Or Bus Device Reset Occurred"}, - {0x2901, "Power On Occurred"}, - {0x2902, "Scsi Bus Reset Occurred"}, - {0x2903, "Bus Device Reset Function Occurred"}, - {0x2904, "Device Internal Reset"}, - {0x2905, "Transceiver Mode Changed To Single-Ended"}, - {0x2906, "Transceiver Mode Changed To Lvd"}, - {0x2A00, "Parameters Changed"}, - {0x2A01, "Mode Parameters Changed"}, - {0x2A02, "Log Parameters Changed"}, - {0x2A03, "Reservations Preempted"}, - {0x2A04, "Reservations Released"}, - {0x2A05, "Registrations Preempted"}, - {0x2B00, "Copy Cannot Execute Since Host Cannot Disconnect"}, - {0x2C00, "Command Sequence Error"}, - {0x2F00, "Commands Cleared By Another Initiator"}, - {0x3000, "Incompatible Medium Installed"}, - {0x3001, "Cannot Read Medium - Unknown Format"}, - {0x3002, "Cannot Read Medium - Incompatible Format"}, - {0x3003, "Cleaning Cartridge Installed"}, - {0x3004, "Cannot Write Medium - Unknown Format"}, - {0x3005, "Cannot Write Medium - Incompatible Format"}, - {0x3006, "Cannot Format Medium - Incompatible Medium"}, - {0x3007, "Cleaning Failure"}, - {0x3100, "Medium Format Corrupted"}, - {0x3101, "Format Command Failed"}, - {0x3200, "No Defect Spare Location Available"}, - {0x3201, "Defect List Update Failure"}, - {0x3400, "Enclosure Failure"}, - {0x3500, "Enclosure Services Failure"}, - {0x3501, "Unsupported Enclosure Function"}, - {0x3502, "Enclosure Services Unavailable"}, - {0x3503, "Enclosure Services Transfer Failure"}, - {0x3504, "Enclosure Services Transfer Refused"}, - {0x3700, "Rounded Parameter"}, - {0x3900, "Saving Parameters Not Supported"}, - {0x3A00, "Medium Not Present"}, - {0x3A01, "Medium Not Present - Tray Closed"}, - {0x3A02, "Medium Not Present - Tray Open"}, - {0x3A03, "Medium Not Present - Loadable"}, - {0x3A04, "Medium Not Present - Medium Auxiliary Memory Accessible"}, - {0x3B0D, "Medium Destination Element Full"}, - {0x3B0E, "Medium Source Element Empty"}, - {0x3B11, "Medium Magazine Not Accessible"}, - {0x3B12, "Medium Magazine Removed"}, - {0x3B13, "Medium Magazine Inserted"}, - {0x3B14, "Medium Magazine Locked"}, - {0x3B15, "Medium Magazine Unlocked"}, - {0x3D00, "Invalid Bits In Identify Message"}, - {0x3E00, "Logical Unit Has Not Self-Configured Yet"}, - {0x3E01, "Logical Unit Failure"}, - {0x3E02, "Timeout On Logical Unit"}, - {0x3E03, "Logical Unit Failed Self-Test"}, - {0x3E04, "Logical Unit Unable To Update Self-Test Log"}, - {0x3F00, "Target Operating Conditions Have Changed"}, - {0x3F01, "Microcode Has Been Changed"}, - {0x3F02, "Changed Operating Definition"}, - {0x3F03, "Inquiry Data Has Changed"}, - {0x3F04, "Component Device Attached"}, - {0x3F05, "Device Identifier Changed"}, - {0x3F06, "Redundancy Group Created Or Modified"}, - {0x3F07, "Redundancy Group Deleted"}, - {0x3F08, "Spare Created Or Modified"}, - {0x3F09, "Spare Deleted"}, - {0x3F0A, "Volume Set Created Or Modified"}, - {0x3F0B, "Volume Set Deleted"}, - {0x3F0C, "Volume Set Deassigned"}, - {0x3F0D, "Volume Set Reassigned"}, - {0x3F0E, "Reported Luns Data Has Changed"}, - {0x3F0F, "Echo Buffer Overwritten"}, - {0x3F10, "Medium Loadable"}, - {0x3F11, "Medium Auxiliary Memory Accessible"}, - {0x4200, "Self-Test Failure (Should Use 40 Nn)"}, - {0x4300, "Message Error"}, - {0x4400, "Internal Target Failure"}, - {0x4500, "Select Or Reselect Failure"}, - {0x4600, "Unsuccessful Soft Reset"}, - {0x4700, "Scsi Parity Error"}, - {0x4701, "Data Phase Crc Error Detected"}, - {0x4702, "Scsi Parity Error Detected During St Data Phase"}, - {0x4703, "Information Unit Crc Error Detected"}, - {0x4704, "Asynchronous Information Protection Error Detected"}, - {0x4800, "Initiator Detected Error Message Received"}, - {0x4900, "Invalid Message Error"}, - {0x4A00, "Command Phase Error"}, - {0x4B00, "Data Phase Error"}, - {0x4C00, "Logical Unit Failed Self-Configuration"}, - {0x4D00, "Tagged Overlapped Commands (Nn = Queue Tag)"}, - {0x4E00, "Overlapped Commands Attempted"}, - {0x5300, "Media Load Or Eject Failed"}, - {0x5302, "Medium Removal Prevented"}, - {0x5501, "System Buffer Full"}, - {0x5502, "Insufficient Reservation Resources"}, - {0x5503, "Insufficient Resources"}, - {0x5504, "Insufficient Registration Resources"}, - {0x5A00, "Operator Request Or State Change Input"}, - {0x5A01, "Operator Medium Removal Request"}, - {0x5A02, "Operator Selected Write Protect"}, - {0x5A03, "Operator Selected Write Permit"}, - {0x5B00, "Log Exception"}, - {0x5B01, "Threshold Condition Met"}, - {0x5B02, "Log Counter At Maximum"}, - {0x5B03, "Log List Codes Exhausted"}, - {0x5C00, "Change"}, - {0x5C02, "Synchronized"}, - {0x5D00, "Failure Prediction Threshold Exceeded"}, - {0x5D10, "Failure General Hard Drive Failure"}, - {0x5D11, "Failure Drive Error Rate Too High"}, - {0x5D12, "Failure Data Error Rate Too High"}, - {0x5D13, "Failure Seek Error Rate Too High"}, - {0x5D14, "Failure Too Many Block Reassigns"}, - {0x5D15, "Failure Access Times Too High"}, - {0x5D16, "Failure Start Unit Times Too High"}, - {0x5D17, "Failure Channel Parametrics"}, - {0x5D18, "Failure Controller Detected"}, - {0x5D19, "Failure Throughput Performance"}, - {0x5D1A, "Failure Seek Time Performance"}, - {0x5D1B, "Failure Spin-Up Retry Count"}, - {0x5D1C, "Failure Drive Calibration Retry"}, - {0x5D20, "Failure General Hard Drive Failure"}, - {0x5D21, "Failure Drive Error Rate Too High"}, - {0x5D22, "Failure Data Error Rate Too High"}, - {0x5D23, "Failure Seek Error Rate Too High"}, - {0x5D24, "Failure Too Many Block Reassigns"}, - {0x5D25, "Failure Access Times Too High"}, - {0x5D26, "Failure Start Unit Times Too High"}, - {0x5D27, "Failure Channel Parametrics"}, - {0x5D28, "Failure Controller Detected"}, - {0x5D29, "Failure Throughput Performance"}, - {0x5D2A, "Failure Seek Time Performance"}, - {0x5D2B, "Failure Spin-Up Retry Count"}, - {0x5D2C, "Failure Drive Calibration Retry"}, - {0x5D30, "Impending Failure General Hard Drive"}, - {0x5D31, "Impending Failure Drive Error Rate Too High"}, - {0x5D32, "Impending Failure Data Error Rate Too High"}, - {0x5D33, "Impending Failure Seek Error Rate Too High"}, - {0x5D34, "Impending Failure Too Many Block Reassigns"}, - {0x5D35, "Impending Failure Access Times Too High"}, - {0x5D36, "Impending Failure Start Unit Times Too High"}, - {0x5D37, "Impending Failure Channel Parametrics"}, - {0x5D38, "Impending Failure Controller Detected"}, - {0x5D39, "Impending Failure Throughput Performance"}, - {0x5D3A, "Impending Failure Seek Time Performance"}, - {0x5D3B, "Impending Failure Spin-Up Retry Count"}, - {0x5D3C, "Impending Failure Drive Calibration Retry"}, - {0x5D40, "Failure General Hard Drive Failure"}, - {0x5D41, "Failure Drive Error Rate Too High"}, - {0x5D42, "Failure Data Error Rate Too High"}, - {0x5D43, "Failure Seek Error Rate Too High"}, - {0x5D44, "Failure Too Many Block Reassigns"}, - {0x5D45, "Failure Access Times Too High"}, - {0x5D46, "Failure Start Unit Times Too High"}, - {0x5D47, "Failure Channel Parametrics"}, - {0x5D48, "Failure Controller Detected"}, - {0x5D49, "Failure Throughput Performance"}, - {0x5D4A, "Failure Seek Time Performance"}, - {0x5D4B, "Failure Spin-Up Retry Count"}, - {0x5D4C, "Failure Drive Calibration Retry Count"}, - {0x5D50, "Failure General Hard Drive Failure"}, - {0x5D51, "Failure Drive Error Rate Too High"}, - {0x5D52, "Failure Data Error Rate Too High"}, - {0x5D53, "Failure Seek Error Rate Too High"}, - {0x5D54, "Failure Too Many Block Reassigns"}, - {0x5D55, "Failure Access Times Too High"}, - {0x5D56, "Failure Start Unit Times Too High"}, - {0x5D57, "Failure Channel Parametrics"}, - {0x5D58, "Failure Controller Detected"}, - {0x5D59, "Failure Throughput Performance"}, - {0x5D5A, "Failure Seek Time Performance"}, - {0x5D5B, "Failure Spin-Up Retry Count"}, - {0x5D5C, "Failure Drive Calibration Retry Count"}, - {0x5D60, "Failure General Hard Drive Failure"}, - {0x5D61, "Failure Drive Error Rate Too High"}, - {0x5D62, "Failure Data Error Rate Too High"}, - {0x5D63, "Failure Seek Error Rate Too High"}, - {0x5D64, "Failure Too Many Block Reassigns"}, - {0x5D65, "Failure Access Times Too High"}, - {0x5D66, "Failure Start Unit Times Too High"}, - {0x5D67, "Failure Channel Parametrics"}, - {0x5D68, "Failure Controller Detected"}, - {0x5D69, "Failure Throughput Performance"}, - {0x5D6A, "Failure Seek Time Performance"}, - {0x5D6B, "Failure Spin-Up Retry Count"}, - {0x5D6C, "Failure Drive Calibration Retry Count"}, - {0x5DFF, "Failure Prediction Threshold Exceeded (False)"}, - {0x5E00, "Low Power Condition On"}, - {0x5E01, "Idle Condition Activated By Timer"}, - {0x5E02, "Standby Condition Activated By Timer"}, - {0x5E03, "Idle Condition Activated By Command"}, - {0x5E04, "Standby Condition Activated By Command"}, - {0x6500, "Voltage Fault"}, - {0, NULL}, -}; - -/* SCSI Status Codes */ -static const value_string scsi_status_val[] = { - {0x00, "Good"}, - {0x02, "Check Condition"}, - {0x04, "Condition Met"}, - {0x08, "Busy"}, - {0x10, "Intermediate"}, - {0x14, "Intermediate Condition Met"}, - {0x18, "Reservation Conflict"}, - {0x28, "Task Set Full"}, - {0x30, "ACA Active"}, - {0x40, "Task Aborted"}, - {0, NULL}, -}; +extern const value_string scsi_status_val[]; /* Function Decls; functions invoked by SAM-2 transport protocols such as * FCP/iSCSI |