1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
/*
* Initial board bringup code for many different boards.
*
* Author: Tom Rini
* trini@mvista.com
* Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <asm/reg.h>
#include <asm/cache.h>
#include <asm/ppc_asm.h>
.text
/*
* Begin at some arbitrary location in RAM or Flash
* Initialize core registers
* Configure memory controller (Not executing from RAM)
* Move the boot code to the link address (8M)
* Setup C stack
* Initialize UART
* Decompress the kernel to 0x0
* Jump to the kernel entry
*
*/
.globl start
start:
bl start_
#ifdef CONFIG_IBM_OPENBIOS
/* The IBM "Tree" bootrom knows that the address of the bootrom
* read only structure is 4 bytes after _start.
*/
.long 0x62726f6d # structure ID - "brom"
.long 0x5f726f00 # - "_ro\0"
.long 1 # structure version
.long bootrom_cmdline # address of *bootrom_cmdline
#endif
start_:
#ifdef CONFIG_FORCE
/* We have some really bad firmware. We must disable the L1
* icache/dcache now or the board won't boot.
*/
li r4,0x0000
isync
mtspr SPRN_HID0,r4
sync
isync
#endif
#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
mr r29,r3 /* On the MBX860, r3 is the board info pointer.
* On the RPXSUPER, r3 points to the NVRAM
* configuration keys.
* On PReP, r3 is the pointer to the residual data.
*/
#endif
#if defined(CONFIG_XILINX_VIRTEX_4_FX)
/* PPC errata 213: only for Virtex-4 FX */
mfccr0 0
oris 0,0,0x50000000@h
mtccr0 0
#endif
mflr r3 /* Save our actual starting address. */
/* The following functions we call must not modify r3 or r4.....
*/
#ifdef CONFIG_6xx
/* On PReP we must look at the OpenFirmware pointer and sanity
* test it. On other platforms, we disable the MMU right now
* and other bits.
*/
#ifdef CONFIG_PPC_PREP
/*
* Save the OF pointer to r25, but only if the entry point is in a sane
* location; if not we store 0. If there is no entry point, or it is
* invalid, we establish the default MSR value immediately. Otherwise,
* we defer doing that, to allow OF functions to be called, until we
* begin uncompressing the kernel.
*/
lis r8,0x0fff /* r8 = 0x0fffffff */
ori r8,r8,0xffff
subc r8,r8,r5 /* r8 = (r5 <= r8) ? ~0 : 0 */
subfe r8,r8,r8
nand r8,r8,r8
and. r5,r5,r8 /* r5 will be cleared if (r5 > r8) */
bne+ haveOF
li r8,MSR_IP|MSR_FP /* Not OF: set MSR immediately */
mtmsr r8
isync
haveOF:
mr r25,r5
#else
bl disable_6xx_mmu
#endif
bl disable_6xx_l1cache
CLEAR_CACHES
#endif
#ifdef CONFIG_8xx
mfmsr r8 /* Turn off interrupts */
li r9,0
ori r9,r9,MSR_EE
andc r8,r8,r9
mtmsr r8
/* We do this because some boot roms don't initialize the
* processor correctly. Don't do this if you want to debug
* using a BDM device.
*/
li r4,0 /* Zero DER to prevent FRZ */
mtspr SPRN_DER,r4
#endif
#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
mr r4,r29 /* put the board info pointer where the relocate
* routine will find it
*/
#endif
/* Get the load address.
*/
subi r3, r3, 4 /* Get the actual IP, not NIP */
b relocate
|
