1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
/*
* (C) Copyright 2001
* Josh Huber, Mission Critical Linux, Inc. <huber@mclx.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* 74xx_7xx.h
*
* 74xx/7xx specific definitions
*/
#ifndef __MPC74XX_H__
#define __MPC74XX_H__
/*----------------------------------------------------------------
* Exception offsets (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100 /* default system reset offset */
/*----------------------------------------------------------------
* l2cr values
*/
#define l2cr 1017
#define L2CR_L2E 0x80000000 /* bit 0 - enable */
#define L2CR_L2PE 0x40000000 /* bit 1 - data parity */
#define L2CR_L2SIZ_2M 0x00000000 /* bits 2-3 - 2MB, MPC7400 only! */
#define L2CR_L2SIZ_1M 0x30000000 /* ... 1MB */
#define L2CR_L2SIZ_HM 0x20000000 /* ... 512K */
#define L2CR_L2SIZ_QM 0x10000000 /* ... 256k */
#define L2CR_L2CLK_1 0x02000000 /* bits 4-6 clock ratio div 1 */
#define L2CR_L2CLK_1_5 0x04000000 /* bits 4-6 clock ratio div 1.5 */
#define L2CR_L2CLK_2 0x08000000 /* bits 4-6 clock ratio div 2 */
#define L2CR_L2CLK_2_5 0x0a000000 /* bits 4-6 clock ratio div 2.5 */
#define L2CR_L2CLK_3 0x0c000000 /* bits 4-6 clock ratio div 3 */
#define L2CR_L2CLK_3_5 0x06000000 /* bits 4-6 clock ratio div 3.5 */
#define L2CR_L2CLK_4 0x0e000000 /* bits 4-6 clock ratio div 4 */
#define L2CR_L2RAM_BURST 0x01000000 /* bits 7-8 - burst SRAM */
#define L2CR_DO 0x00400000 /* bit 9 - enable caching of instr. in L2 */
#define L2CR_L2I 0x00200000 /* bit 10 - global invalidate bit */
#define L2CR_L2CTL 0x00100000 /* bit 11 - l2 ram control */
#define L2CR_L2WT 0x00080000 /* bit 12 - l2 write-through */
#define L2CR_TS 0x00040000 /* bit 13 - test support on */
#define L2CR_TS_OFF -L2CR_TS /* bit 13 - test support off */
#define L2CR_L2OH_5 0x00000000 /* bits 14-15 - output hold time = short */
#define L2CR_L2OH_1 0x00010000 /* bits 14-15 - output hold time = medium */
#define L2CR_L2OH_INV 0x00020000 /* bits 14-15 - output hold time = long */
#define L2CR_L2IP 0x00000001 /* global invalidate in progress */
/*----------------------------------------------------------------
* BAT settings. Look in config_<BOARD>.h for the actual setup
*/
#define BATU_BL_128K 0x00000000
#define BATU_BL_256K 0x00000004
#define BATU_BL_512K 0x0000000c
#define BATU_BL_1M 0x0000001c
#define BATU_BL_2M 0x0000003c
#define BATU_BL_4M 0x0000007c
#define BATU_BL_8M 0x000000fc
#define BATU_BL_16M 0x000001fc
#define BATU_BL_32M 0x000003fc
#define BATU_BL_64M 0x000007fc
#define BATU_BL_128M 0x00000ffc
#define BATU_BL_256M 0x00001ffc
#define BATU_VS 0x00000002
#define BATU_VP 0x00000001
#define BATU_INVALID 0x00000000
#define BATL_WRITETHROUGH 0x00000040
#define BATL_CACHEINHIBIT 0x00000020
#define BATL_MEMCOHERENCE 0x00000010
#define BATL_GUARDEDSTORAGE 0x00000008
#define BATL_NO_ACCESS 0x00000000
#define BATL_PP_MSK 0x00000003
#define BATL_PP_00 0x00000000 /* No access */
#define BATL_PP_01 0x00000001 /* Read-only */
#define BATL_PP_10 0x00000002 /* Read-write */
#define BATL_PP_11 0x00000003
#define BATL_PP_NO_ACCESS BATL_PP_00
#define BATL_PP_RO BATL_PP_01
#define BATL_PP_RW BATL_PP_10
#ifndef __ASSEMBLY__
/* cpu ids we detect */
typedef enum __cpu_t {
CPU_740, CPU_750,
CPU_740P, CPU_750P,
CPU_745, CPU_755,
CPU_750CX,
CPU_7400,
CPU_7410,
CPU_7450,
CPU_UNKNOWN} cpu_t;
extern cpu_t get_cpu_type(void);
#define l1icache_enable icache_enable
void l2cache_enable(void);
void l1dcache_enable(void);
static __inline__ unsigned long get_msr (void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr;
}
static __inline__ void set_msr (unsigned long msr)
{
asm volatile("mtmsr %0" : : "r" (msr));
}
static __inline__ unsigned long get_hid0 (void)
{
unsigned long hid0;
asm volatile("mfspr %0, 1008" : "=r" (hid0) :);
return hid0;
}
static __inline__ unsigned long get_hid1 (void)
{
unsigned long hid1;
asm volatile("mfspr %0, 1009" : "=r" (hid1) :);
return hid1;
}
static __inline__ void set_hid0 (unsigned long hid0)
{
asm volatile("mtspr 1008, %0" : : "r" (hid0));
}
static __inline__ void set_hid1 (unsigned long hid1)
{
asm volatile("mtspr 1009, %0" : : "r" (hid1));
}
#endif /* __ASSEMBLY__ */
#endif /* __MPC74XX_H__ */
|
