1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
|
/*
* U-boot - start.S Startup file of u-boot for BF533/BF561
*
* Copyright (c) 2005-2007 Analog Devices Inc.
*
* This file is based on head.S
* Copyright (c) 2003 Metrowerks/Motorola
* Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
* Kenneth Albanowski <kjahds@kjahds.com>,
* The Silver Hammer Group, Ltd.
* (c) 1995, Dionne & Associates
* (c) 1995, DKG Display Tech.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
/*
* Note: A change in this file subsequently requires a change in
* board/$(board_name)/config.mk for a valid u-boot.bin
*/
#define ASSEMBLY
#include <linux/config.h>
#include <config.h>
#include <asm/blackfin.h>
.global _stext;
.global __bss_start;
.global start;
.global _start;
.global _rambase;
.global _ramstart;
.global _ramend;
.global edata;
.global _initialize;
.global _exit;
.global flashdataend;
.global init_sdram;
.text
_start:
start:
_stext:
R0 = 0x32;
SYSCFG = R0;
SSYNC;
/*
* As per HW reference manual DAG registers,
* DATA and Address resgister shall be zero'd
* in initialization, after a reset state
*/
r1 = 0; /* Data registers zero'd */
r2 = 0;
r3 = 0;
r4 = 0;
r5 = 0;
r6 = 0;
r7 = 0;
p0 = 0; /* Address registers zero'd */
p1 = 0;
p2 = 0;
p3 = 0;
p4 = 0;
p5 = 0;
i0 = 0; /* DAG Registers zero'd */
i1 = 0;
i2 = 0;
i3 = 0;
m0 = 0;
m1 = 0;
m3 = 0;
m3 = 0;
l0 = 0;
l1 = 0;
l2 = 0;
l3 = 0;
b0 = 0;
b1 = 0;
b2 = 0;
b3 = 0;
/*
* Set loop counters to zero, to make sure that
* hw loops are disabled.
*/
r0 = 0;
lc0 = r0;
lc1 = r0;
SSYNC;
/* Check soft reset status */
p0.h = SWRST >> 16;
p0.l = SWRST & 0xFFFF;
r0.l = w[p0];
cc = bittst(r0, 15);
if !cc jump no_soft_reset;
/* Clear Soft reset */
r0 = 0x0000;
w[p0] = r0;
ssync;
no_soft_reset:
nop;
/* Clear EVT registers */
p0.h = (EVT_EMULATION_ADDR >> 16);
p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
p0 += 8;
p1 = 14;
r1 = 0;
LSETUP(4,4) lc0 = p1;
[ p0 ++ ] = r1;
p0.h = hi(SIC_IWR);
p0.l = lo(SIC_IWR);
r0.l = 0x1;
w[p0] = r0.l;
SSYNC;
sp.l = (0xffb01000 & 0xFFFF);
sp.h = (0xffb01000 >> 16);
/*
* Check if the code is in SDRAM
* If the code is in SDRAM, skip SDRAM initializaiton
*/
call get_pc;
r3.l = 0x0;
r3.h = 0x2000;
cc = r0 < r3 (iu);
if cc jump sdram_initialized;
call init_sdram;
/* relocate into to RAM */
sdram_initialized:
call get_pc;
offset:
r2.l = offset;
r2.h = offset;
r3.l = start;
r3.h = start;
r1 = r2 - r3;
r0 = r0 - r1;
p1 = r0;
p2.l = (CFG_MONITOR_BASE & 0xffff);
p2.h = (CFG_MONITOR_BASE >> 16);
p3 = 0x04;
p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
loop1:
r1 = [p1 ++ p3];
[p2 ++ p3] = r1;
cc=p2==p4;
if !cc jump loop1;
/*
* configure STACK
*/
r0.h = (CONFIG_STACKBASE >> 16);
r0.l = (CONFIG_STACKBASE & 0xFFFF);
sp = r0;
fp = sp;
/*
* This next section keeps the processor in supervisor mode
* during kernel boot. Switches to user mode at end of boot.
* See page 3-9 of Hardware Reference manual for documentation.
*/
/* To keep ourselves in the supervisor mode */
p0.l = (EVT_IVG15_ADDR & 0xFFFF);
p0.h = (EVT_IVG15_ADDR >> 16);
p1.l = _real_start;
p1.h = _real_start;
[p0] = p1;
p0.l = (IMASK & 0xFFFF);
p0.h = (IMASK >> 16);
r0.l = LO(IVG15_POS);
r0.h = HI(IVG15_POS);
[p0] = r0;
raise 15;
p0.l = WAIT_HERE;
p0.h = WAIT_HERE;
reti = p0;
rti;
WAIT_HERE:
jump WAIT_HERE;
.global _real_start;
_real_start:
[ -- sp ] = reti;
#ifdef CONFIG_EZKIT561
p0.l = (WDOG_CTL & 0xFFFF);
p0.h = (WDOG_CTL >> 16);
r0 = WATCHDOG_DISABLE(z);
w[p0] = r0;
#endif
/* DMA reset code to Hi of L1 SRAM */
copy:
P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */
P1.L = lo(SYSMMR_BASE);
R0.H = reset_start; /* Source Address (high) */
R0.L = reset_start; /* Source Address (low) */
R1.H = reset_end;
R1.L = reset_end;
R2 = R1 - R0; /* Count */
R1.H = hi(L1_ISRAM); /* Destination Address (high) */
R1.L = lo(L1_ISRAM); /* Destination Address (low) */
R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */
R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */
DMA:
R6 = 0x1 (Z);
W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */
W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */
[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */
W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */
/* Set Source DMAConfig = DMA Enable,
Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */
W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */
W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */
/* Set Destination DMAConfig = DMA Enable,
Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
WAIT_DMA_DONE:
p0.h = hi(MDMA_D0_IRQ_STATUS);
p0.l = lo(MDMA_D0_IRQ_STATUS);
R0 = W[P0](Z);
CC = BITTST(R0, 0);
if ! CC jump WAIT_DMA_DONE
R0 = 0x1;
W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */
/* Initialize BSS Section with 0 s */
p1.l = __bss_start;
p1.h = __bss_start;
p2.l = _end;
p2.h = _end;
r1 = p1;
r2 = p2;
r3 = r2 - r1;
r3 = r3 >> 2;
p3 = r3;
lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
CC = p2<=p1;
if CC jump _clear_bss_skip;
r0 = 0;
_clear_bss:
_clear_bss_end:
[p1++] = r0;
_clear_bss_skip:
p0.l = _start1;
p0.h = _start1;
jump (p0);
reset_start:
p0.h = WDOG_CNT >> 16;
p0.l = WDOG_CNT & 0xffff;
r0 = 0x0010;
w[p0] = r0;
p0.h = WDOG_CTL >> 16;
p0.l = WDOG_CTL & 0xffff;
r0 = 0x0000;
w[p0] = r0;
reset_wait:
jump reset_wait;
reset_end: nop;
_exit:
jump.s _exit;
get_pc:
r0 = rets;
rts;
|
