diff options
Diffstat (limited to 'include/asm-i386/io.h')
| -rw-r--r-- | include/asm-i386/io.h | 237 |
1 files changed, 0 insertions, 237 deletions
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h deleted file mode 100644 index 9b757d489e..0000000000 --- a/include/asm-i386/io.h +++ /dev/null @@ -1,237 +0,0 @@ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -/* - * This file contains the definitions for the x86 IO instructions - * inb/inw/inl/outb/outw/outl and the "string versions" of the same - * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing" - * versions of the single-IO instructions (inb_p/inw_p/..). - * - * This file is not meant to be obfuscating: it's just complicated - * to (a) handle it all in a way that makes gcc able to optimize it - * as well as possible and (b) trying to avoid writing the same thing - * over and over again with slight variations and possibly making a - * mistake somewhere. - */ - -/* - * Thanks to James van Artsdalen for a better timing-fix than - * the two short jumps: using outb's to a nonexistent port seems - * to guarantee better timings even on fast machines. - * - * On the other hand, I'd like to be sure of a non-existent port: - * I feel a bit unsafe about using 0x80 (should be safe, though) - * - * Linus - */ - - /* - * Bit simplified and optimized by Jan Hubicka - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999. - * - * isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added, - * isa_read[wl] and isa_write[wl] fixed - * - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -#define IO_SPACE_LIMIT 0xffff - - -#ifdef __KERNEL__ - - -/* - * readX/writeX() are used to access memory mapped devices. On some - * architectures the memory mapped IO stuff needs to be accessed - * differently. On the x86 architecture, we just read/write the - * memory location directly. - */ - -#define readb(addr) (*(volatile unsigned char *) (addr)) -#define readw(addr) (*(volatile unsigned short *) (addr)) -#define readl(addr) (*(volatile unsigned int *) (addr)) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl - -#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b)) -#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b)) -#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define memset_io(a,b,c) memset((a),(b),(c)) -#define memcpy_fromio(a,b,c) memcpy((a),(b),(c)) -#define memcpy_toio(a,b,c) memcpy((a),(b),(c)) - -/* - * ISA space is 'always mapped' on a typical x86 system, no need to - * explicitly ioremap() it. The fact that the ISA IO space is mapped - * to PAGE_OFFSET is pure coincidence - it does not mean ISA values - * are physical addresses. The following constant pointer can be - * used as the IO-area pointer (it can be iounmapped as well, so the - * analogy with PCI is quite large): - */ -#define isa_readb(a) readb((a)) -#define isa_readw(a) readw((a)) -#define isa_readl(a) readl((a)) -#define isa_writeb(b,a) writeb(b,(a)) -#define isa_writew(w,a) writew(w,(a)) -#define isa_writel(l,a) writel(l,(a)) -#define isa_memset_io(a,b,c) memset_io((a),(b),(c)) -#define isa_memcpy_fromio(a,b,c) memcpy_fromio((a),(b),(c)) -#define isa_memcpy_toio(a,b,c) memcpy_toio((a),(b),(c)) - - -static inline int check_signature(unsigned long io_addr, - const unsigned char *signature, int length) -{ - int retval = 0; - do { - if (readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} - -/** - * isa_check_signature - find BIOS signatures - * @io_addr: mmio address to check - * @signature: signature block - * @length: length of signature - * - * Perform a signature comparison with the ISA mmio address io_addr. - * Returns 1 on a match. - * - * This function is deprecated. New drivers should use ioremap and - * check_signature. - */ - - -static inline int isa_check_signature(unsigned long io_addr, - const unsigned char *signature, int length) -{ - int retval = 0; - do { - if (isa_readb(io_addr) != *signature) - goto out; - io_addr++; - signature++; - length--; - } while (length); - retval = 1; -out: - return retval; -} - -#endif /* __KERNEL__ */ - -#ifdef SLOW_IO_BY_JUMPING -#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:" -#else -#define __SLOW_DOWN_IO "\noutb %%al,$0x80" -#endif - -#ifdef REALLY_SLOW_IO -#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO -#else -#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO -#endif - - -/* - * Talk about misusing macros.. - */ -#define __OUT1(s,x) \ -static inline void out##s(unsigned x value, unsigned short port) { - -#define __OUT2(s,s1,s2) \ -__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1" - - -#define __OUT(s,s1,x) \ -__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \ -__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));} - -#define __IN1(s) \ -static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v; - -#define __IN2(s,s1,s2) \ -__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0" - -#define __IN(s,s1,i...) \ -__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \ -__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; } - -#define __INS(s) \ -static inline void ins##s(unsigned short port, void * addr, unsigned long count) \ -{ __asm__ __volatile__ ("rep ; ins" #s \ -: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } - -#define __OUTS(s) \ -static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \ -{ __asm__ __volatile__ ("rep ; outs" #s \ -: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); } - -#define RETURN_TYPE unsigned char -__IN(b,"") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned short -__IN(w,"") -#undef RETURN_TYPE -#define RETURN_TYPE unsigned int -__IN(l,"") -#undef RETURN_TYPE - -__OUT(b,"b",char) -__OUT(w,"w",short) -__OUT(l,,int) - -__INS(b) -__INS(w) -__INS(l) - -__OUTS(b) -__OUTS(w) -__OUTS(l) - -static inline void sync(void) -{ -} - -/* - * Given a physical address and a length, return a virtual address - * that can be used to access the memory range with the caching - * properties specified by "flags". - */ -#define MAP_NOCACHE (0) -#define MAP_WRCOMBINE (0) -#define MAP_WRBACK (0) -#define MAP_WRTHROUGH (0) - -static inline void * -map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags) -{ - return (void *)paddr; -} - -/* - * Take down a mapping set up by map_physmem(). - */ -static inline void unmap_physmem(void *vaddr, unsigned long flags) -{ - -} - -static inline phys_addr_t virt_to_phys(void * vaddr) -{ - return (phys_addr_t)(vaddr); -} - -#endif |