diff options
Diffstat (limited to 'drivers/eepro100.c')
| -rw-r--r-- | drivers/eepro100.c | 196 |
1 files changed, 98 insertions, 98 deletions
diff --git a/drivers/eepro100.c b/drivers/eepro100.c index 9db7bd80c2..0054e87571 100644 --- a/drivers/eepro100.c +++ b/drivers/eepro100.c @@ -34,67 +34,67 @@ /* Ethernet chip registers. */ -#define SCBStatus 0 /* Rx/Command Unit Status *Word* */ -#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */ -#define SCBCmd 2 /* Rx/Command Unit Command *Word* */ -#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */ -#define SCBPointer 4 /* General purpose pointer. */ -#define SCBPort 8 /* Misc. commands and operands. */ -#define SCBflash 12 /* Flash memory control. */ -#define SCBeeprom 14 /* EEPROM memory control. */ -#define SCBCtrlMDI 16 /* MDI interface control. */ -#define SCBEarlyRx 20 /* Early receive byte count. */ -#define SCBGenControl 28 /* 82559 General Control Register */ -#define SCBGenStatus 29 /* 82559 General Status register */ +#define SCBStatus 0 /* Rx/Command Unit Status *Word* */ +#define SCBIntAckByte 1 /* Rx/Command Unit STAT/ACK byte */ +#define SCBCmd 2 /* Rx/Command Unit Command *Word* */ +#define SCBIntrCtlByte 3 /* Rx/Command Unit Intr.Control Byte */ +#define SCBPointer 4 /* General purpose pointer. */ +#define SCBPort 8 /* Misc. commands and operands. */ +#define SCBflash 12 /* Flash memory control. */ +#define SCBeeprom 14 /* EEPROM memory control. */ +#define SCBCtrlMDI 16 /* MDI interface control. */ +#define SCBEarlyRx 20 /* Early receive byte count. */ +#define SCBGenControl 28 /* 82559 General Control Register */ +#define SCBGenStatus 29 /* 82559 General Status register */ /* 82559 SCB status word defnitions */ -#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */ -#define SCB_STATUS_FR 0x4000 /* frame received */ -#define SCB_STATUS_CNA 0x2000 /* CU left active state */ -#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */ -#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */ -#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */ -#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */ +#define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */ +#define SCB_STATUS_FR 0x4000 /* frame received */ +#define SCB_STATUS_CNA 0x2000 /* CU left active state */ +#define SCB_STATUS_RNR 0x1000 /* receiver left ready state */ +#define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */ +#define SCB_STATUS_SWI 0x0400 /* software generated interrupt */ +#define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */ -#define SCB_INTACK_MASK 0xFD00 /* all the above */ +#define SCB_INTACK_MASK 0xFD00 /* all the above */ -#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA) -#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR) +#define SCB_INTACK_TX (SCB_STATUS_CX | SCB_STATUS_CNA) +#define SCB_INTACK_RX (SCB_STATUS_FR | SCB_STATUS_RNR) /* System control block commands */ /* CU Commands */ -#define CU_NOP 0x0000 -#define CU_START 0x0010 -#define CU_RESUME 0x0020 -#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */ -#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */ -#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */ -#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */ +#define CU_NOP 0x0000 +#define CU_START 0x0010 +#define CU_RESUME 0x0020 +#define CU_STATSADDR 0x0040 /* Load Dump Statistics ctrs addr */ +#define CU_SHOWSTATS 0x0050 /* Dump statistics counters. */ +#define CU_ADDR_LOAD 0x0060 /* Base address to add to CU commands */ +#define CU_DUMPSTATS 0x0070 /* Dump then reset stats counters. */ /* RUC Commands */ -#define RUC_NOP 0x0000 -#define RUC_START 0x0001 -#define RUC_RESUME 0x0002 -#define RUC_ABORT 0x0004 -#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */ -#define RUC_RESUMENR 0x0007 - -#define CU_CMD_MASK 0x00f0 -#define RU_CMD_MASK 0x0007 - -#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */ -#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */ - -#define CU_STATUS_MASK 0x00C0 -#define RU_STATUS_MASK 0x003C - -#define RU_STATUS_IDLE (0<<2) -#define RU_STATUS_SUS (1<<2) -#define RU_STATUS_NORES (2<<2) -#define RU_STATUS_READY (4<<2) -#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2)) +#define RUC_NOP 0x0000 +#define RUC_START 0x0001 +#define RUC_RESUME 0x0002 +#define RUC_ABORT 0x0004 +#define RUC_ADDR_LOAD 0x0006 /* (seems not to clear on acceptance) */ +#define RUC_RESUMENR 0x0007 + +#define CU_CMD_MASK 0x00f0 +#define RU_CMD_MASK 0x0007 + +#define SCB_M 0x0100 /* 0 = enable interrupt, 1 = disable */ +#define SCB_SWI 0x0200 /* 1 - cause device to interrupt */ + +#define CU_STATUS_MASK 0x00C0 +#define RU_STATUS_MASK 0x003C + +#define RU_STATUS_IDLE (0<<2) +#define RU_STATUS_SUS (1<<2) +#define RU_STATUS_NORES (2<<2) +#define RU_STATUS_READY (4<<2) +#define RU_STATUS_NO_RBDS_SUS ((1<<2)|(8<<2)) #define RU_STATUS_NO_RBDS_NORES ((2<<2)|(8<<2)) #define RU_STATUS_NO_RBDS_READY ((4<<2)|(8<<2)) @@ -138,27 +138,27 @@ struct RxFD { }; #define RFD_STATUS_C 0x8000 /* completion of received frame */ -#define RFD_STATUS_OK 0x2000 /* frame received with no errors */ - -#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */ -#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */ -#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */ -#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */ - -#define RFD_COUNT_MASK 0x3fff -#define RFD_COUNT_F 0x4000 -#define RFD_COUNT_EOF 0x8000 - -#define RFD_RX_CRC 0x0800 /* crc error */ -#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */ -#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */ -#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */ -#define RFD_RX_SHORT 0x0080 /* short frame error */ -#define RFD_RX_LENGTH 0x0020 -#define RFD_RX_ERROR 0x0010 /* receive error */ -#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */ -#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */ -#define RFD_RX_TCO 0x0001 /* TCO indication */ +#define RFD_STATUS_OK 0x2000 /* frame received with no errors */ + +#define RFD_CONTROL_EL 0x8000 /* 1=last RFD in RFA */ +#define RFD_CONTROL_S 0x4000 /* 1=suspend RU after receiving frame */ +#define RFD_CONTROL_H 0x0010 /* 1=RFD is a header RFD */ +#define RFD_CONTROL_SF 0x0008 /* 0=simplified, 1=flexible mode */ + +#define RFD_COUNT_MASK 0x3fff +#define RFD_COUNT_F 0x4000 +#define RFD_COUNT_EOF 0x8000 + +#define RFD_RX_CRC 0x0800 /* crc error */ +#define RFD_RX_ALIGNMENT 0x0400 /* alignment error */ +#define RFD_RX_RESOURCE 0x0200 /* out of space, no resources */ +#define RFD_RX_DMA_OVER 0x0100 /* DMA overrun */ +#define RFD_RX_SHORT 0x0080 /* short frame error */ +#define RFD_RX_LENGTH 0x0020 +#define RFD_RX_ERROR 0x0010 /* receive error */ +#define RFD_RX_NO_ADR_MATCH 0x0004 /* no address match */ +#define RFD_RX_IA_MATCH 0x0002 /* individual address does not match */ +#define RFD_RX_TCO 0x0001 /* TCO indication */ /* Transmit frame descriptors */ @@ -176,45 +176,45 @@ struct TxFD { /* Transmit frame descriptor set. */ }; #define TxCB_CMD_TRANSMIT 0x0004 /* transmit command */ -#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */ -#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */ -#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */ -#define TxCB_CMD_S 0x4000 /* suspend on completion */ -#define TxCB_CMD_EL 0x8000 /* last command block in CBL */ +#define TxCB_CMD_SF 0x0008 /* 0=simplified, 1=flexible mode */ +#define TxCB_CMD_NC 0x0010 /* 0=CRC insert by controller */ +#define TxCB_CMD_I 0x2000 /* generate interrupt on completion */ +#define TxCB_CMD_S 0x4000 /* suspend on completion */ +#define TxCB_CMD_EL 0x8000 /* last command block in CBL */ -#define TxCB_COUNT_MASK 0x3fff -#define TxCB_COUNT_EOF 0x8000 +#define TxCB_COUNT_MASK 0x3fff +#define TxCB_COUNT_EOF 0x8000 /* The Speedo3 Rx and Tx frame/buffer descriptors. */ struct descriptor { /* A generic descriptor. */ volatile u16 status; volatile u16 command; - volatile u32 link; /* struct descriptor * */ + volatile u32 link; /* struct descriptor * */ unsigned char params[0]; }; -#define CFG_CMD_EL 0x8000 -#define CFG_CMD_SUSPEND 0x4000 -#define CFG_CMD_INT 0x2000 -#define CFG_CMD_IAS 0x0001 /* individual address setup */ -#define CFG_CMD_CONFIGURE 0x0002 /* configure */ +#define CFG_CMD_EL 0x8000 +#define CFG_CMD_SUSPEND 0x4000 +#define CFG_CMD_INT 0x2000 +#define CFG_CMD_IAS 0x0001 /* individual address setup */ +#define CFG_CMD_CONFIGURE 0x0002 /* configure */ -#define CFG_STATUS_C 0x8000 -#define CFG_STATUS_OK 0x2000 +#define CFG_STATUS_C 0x8000 +#define CFG_STATUS_OK 0x2000 /* Misc. */ -#define NUM_RX_DESC PKTBUFSRX -#define NUM_TX_DESC 1 /* Number of TX descriptors */ +#define NUM_RX_DESC PKTBUFSRX +#define NUM_TX_DESC 1 /* Number of TX descriptors */ #define TOUT_LOOP 1000000 #define ETH_ALEN 6 -static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */ -static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */ +static struct RxFD rx_ring[NUM_RX_DESC]; /* RX descriptor ring */ +static struct TxFD tx_ring[NUM_TX_DESC]; /* TX descriptor ring */ static int rx_next; /* RX descriptor ring pointer */ static int tx_next; /* TX descriptor ring pointer */ static int tx_threshold; @@ -277,26 +277,26 @@ static inline int INL (struct eth_device *dev, u_long addr) return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase)); } -int miiphy_read (unsigned char addr, - unsigned char reg, - unsigned short *value) +int miiphy_read (unsigned char addr, + unsigned char reg, + unsigned short *value) { int cmd = (2 << 26) | ((addr & 0x1f) << 21) | ((reg & 0x1f) << 16); struct eth_device *dev = eth_get_dev (); OUTL (dev, cmd, SCBCtrlMDI); - + do { cmd = INL (dev, SCBCtrlMDI); } while (!(cmd & (1 << 28))); *value = (unsigned short) (cmd & 0xffff); - + return 0; } -int miiphy_write (unsigned char addr, +int miiphy_write (unsigned char addr, unsigned char reg, unsigned short value) { @@ -764,12 +764,12 @@ int eepro100_write_eeprom (struct eth_device* dev, int location, int addr_len, u OUTW(dev, EE_ENB | dataval, SCBeeprom); udelay(1); - datalong = datalong << 1; /* Adjust significant data bit*/ + datalong = datalong << 1; /* Adjust significant data bit*/ } /* Finish up command (toggle CS) */ OUTW(dev, EE_ENB & ~EE_CS, SCBeeprom); - udelay(1); /* delay for more than 250 ns */ + udelay(1); /* delay for more than 250 ns */ OUTW(dev, EE_ENB, SCBeeprom); /* Wait for programming ready (D0 = 1) */ |