diff options
Diffstat (limited to 'common/cmd_otp.c')
| -rw-r--r-- | common/cmd_otp.c | 157 |
1 files changed, 115 insertions, 42 deletions
diff --git a/common/cmd_otp.c b/common/cmd_otp.c index e27bb29217..5d85a484d4 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -6,7 +6,7 @@ * Licensed under the GPL-2 or later. */ -/* There are 512 128-bit "pages" (0x000 to 0x1FF). +/* There are 512 128-bit "pages" (0x000 through 0x1FF). * The pages are accessable as 64-bit "halfpages" (an upper and lower half). * The pages are not part of the memory map. There is an OTP controller which * handles scanning in/out of bits. While access is done through OTP MMRs, @@ -17,8 +17,6 @@ #include <common.h> #include <command.h> -#ifdef CONFIG_CMD_OTP - #include <asm/blackfin.h> #include <asm/mach-common/bits/otp.h> @@ -40,30 +38,87 @@ static const char *otp_strerror(uint32_t err) #define lowup(x) ((x) % 2 ? "upper" : "lower") -int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +static int check_voltage(void) +{ + /* Make sure voltage limits are within datasheet spec */ + uint16_t vr_ctl = bfin_read_VR_CTL(); + +#ifdef __ADSPBF54x__ + /* 0.9V <= VDDINT <= 1.1V */ + if ((vr_ctl & 0xc) && (vr_ctl & 0xc0) == 0xc0) + return 1; +#else + /* for the parts w/out qualification yet */ + (void)vr_ctl; +#endif + + return 0; +} + +static void set_otp_timing(bool write) { - bool force = false; - if (!strcmp(argv[1], "--force")) { - force = true; - argv[1] = argv[0]; - argv++; - --argc; + static uint32_t timing; + if (!timing) { + uint32_t tp1, tp2, tp3; + /* OTP_TP1 = 1000 / sclk_period (in nanoseconds) + * OTP_TP1 = 1000 / (1 / get_sclk() * 10^9) + * OTP_TP1 = (1000 * get_sclk()) / 10^9 + * OTP_TP1 = get_sclk() / 10^6 + */ + tp1 = get_sclk() / 1000000; + /* OTP_TP2 = 400 / (2 * sclk_period) + * OTP_TP2 = 400 / (2 * 1 / get_sclk() * 10^9) + * OTP_TP2 = (400 * get_sclk()) / (2 * 10^9) + * OTP_TP2 = (2 * get_sclk()) / 10^7 + */ + tp2 = (2 * get_sclk() / 10000000) << 8; + /* OTP_TP3 = magic constant */ + tp3 = (0x1401) << 15; + timing = tp1 | tp2 | tp3; } + bfrom_OtpCommand(OTP_INIT, write ? timing : timing & ~(-1 << 15)); +} + +int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + uint32_t ret, base_flags; + bool prompt_user, force_read; uint32_t (*otp_func)(uint32_t page, uint32_t flags, uint64_t *page_content); - if (!strcmp(argv[1], "read")) - otp_func = otp_read; - else if (!strcmp(argv[1], "write")) - otp_func = otp_write; - else { + + if (argc < 4) { usage: cmd_usage(cmdtp); return 1; } + prompt_user = false; + base_flags = 0; + if (!strcmp(argv[1], "read")) + otp_func = bfrom_OtpRead; + else if (!strcmp(argv[1], "dump")) { + otp_func = bfrom_OtpRead; + force_read = true; + } else if (!strcmp(argv[1], "write")) { + otp_func = bfrom_OtpWrite; + base_flags = OTP_CHECK_FOR_PREV_WRITE; + if (!strcmp(argv[2], "--force")) { + argv[2] = argv[1]; + argv++; + --argc; + } else + prompt_user = false; + } else if (!strcmp(argv[1], "lock")) { + if (argc != 4) + goto usage; + otp_func = bfrom_OtpWrite; + base_flags = OTP_LOCK; + } else + goto usage; + uint64_t *addr = (uint64_t *)simple_strtoul(argv[2], NULL, 16); uint32_t page = simple_strtoul(argv[3], NULL, 16); - uint32_t flags, ret; + uint32_t flags; size_t i, count; ulong half; @@ -81,8 +136,15 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } else half = 0; + /* "otp lock" has slightly different semantics */ + if (base_flags & OTP_LOCK) { + count = page; + page = (uint32_t)addr; + addr = NULL; + } + /* do to the nature of OTP, make sure users are sure */ - if (!force && otp_func == otp_write) { + if (prompt_user) { printf( "Writing one time programmable memory\n" "Make sure your operating voltages and temperature are within spec\n" @@ -111,30 +173,42 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } } - - /* Only supported in newer silicon ... enable writing */ -#if (0) - otp_command(OTP_INIT, ...); -#else - *pOTP_TIMING = 0x32149485; -#endif } printf("OTP memory %s: addr 0x%08lx page 0x%03X count %ld ... ", argv[1], addr, page, count); + set_otp_timing(otp_func == bfrom_OtpWrite); + if (otp_func == bfrom_OtpWrite && check_voltage()) { + puts("ERROR: VDDINT voltage is out of spec for writing\n"); + return -1; + } + + /* Do the actual reading/writing stuff */ ret = 0; for (i = half; i < count + half; ++i) { - flags = (i % 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF; + flags = base_flags | (i % 2 ? OTP_UPPER_HALF : OTP_LOWER_HALF); + try_again: ret = otp_func(page, flags, addr); - if (ret & 0x1) - break; - else if (ret) + if (ret & OTP_MASTER_ERROR) { + if (force_read) { + if (flags & OTP_NO_ECC) + break; + else + flags |= OTP_NO_ECC; + puts("E"); + goto try_again; + } else + break; + } else if (ret) puts("W"); else puts("."); - ++addr; - if (i % 2) + if (!(base_flags & OTP_LOCK)) { + ++addr; + if (i % 2) + ++page; + } else ++page; } if (ret & 0x1) @@ -143,21 +217,20 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) else puts(" done\n"); - if (otp_func == otp_write) - /* Only supported in newer silicon ... disable writing */ -#if (0) - otp_command(OTP_INIT, ...); -#else - *pOTP_TIMING = 0x1485; -#endif + /* Make sure we disable writing */ + set_otp_timing(false); + bfrom_OtpCommand(OTP_CLOSE, 0); return ret; } -U_BOOT_CMD(otp, 6, 0, do_otp, - "One-Time-Programmable sub-system", +U_BOOT_CMD(otp, 7, 0, do_otp, + "One-Time-Programmable sub-system\n", "read <addr> <page> [count] [half]\n" + " - read 'count' half-pages starting at 'page' (offset 'half') to 'addr'\n" + "otp dump <addr> <page> [count] [half]\n" + " - like 'otp read', but skip read errors\n" "otp write [--force] <addr> <page> [count] [half]\n" - " - read/write 'count' half-pages starting at page 'page' (offset 'half')\n"); - -#endif + " - write 'count' half-pages starting at 'page' (offset 'half') from 'addr'\n" + "otp lock <page> <count>\n" + " - lock 'count' pages starting at 'page'\n"); |