diff options
Diffstat (limited to 'board/xpedite1k/xpedite1k.c')
| -rw-r--r-- | board/xpedite1k/xpedite1k.c | 24 |
1 files changed, 12 insertions, 12 deletions
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index c94a345d90..58bcfaf7ba 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -40,7 +40,7 @@ int board_early_init_f(void) /* TBS: Setup the GPIO access for the user LEDs */ mfsdr(sdr_pfc0, sdrreg); mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); - out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); + out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); LED0_OFF(); LED1_OFF(); LED2_OFF(); @@ -129,7 +129,7 @@ phys_size_t initdram (int board_type) } -#if defined(CFG_DRAM_TEST) +#if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { uint *pstart = (uint *) 0x00000000; @@ -231,7 +231,7 @@ int pci_pre_init(struct pci_controller * hose ) return (0); } -#if defined(CFG_PCI_FORCE_PCI_CONV) +#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) /* Setup System Device Register PCIX0_XCR */ mfsdr(sdr_xcr, strap); strap &= 0x0f000000; @@ -249,7 +249,7 @@ int pci_pre_init(struct pci_controller * hose ) * may not be sufficient for a given board. * ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { /*--------------------------------------------------------------------------+ @@ -264,7 +264,7 @@ void pci_target_init(struct pci_controller * hose ) * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); out32r( PCIX0_PIM0LAH, 0 ); out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); @@ -273,12 +273,12 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /************************************************************************* @@ -299,7 +299,7 @@ void pci_target_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { - return ((in32(CFG_GPIO_BASE + 0x1C) & 0x00000800) == 0); + return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0); } #endif /* defined(CONFIG_PCI) */ @@ -317,7 +317,7 @@ int post_hotkeys_pressed(void) void post_word_store (ulong a) { volatile ulong *save_addr = - (volatile ulong *)(CFG_POST_WORD_ADDR); + (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); *save_addr = a; } @@ -325,7 +325,7 @@ void post_word_store (ulong a) ulong post_word_load (void) { volatile ulong *save_addr = - (volatile ulong *)(CFG_POST_WORD_ADDR); + (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); return *save_addr; } @@ -342,7 +342,7 @@ void board_get_enetaddr (uchar * enet) unsigned char buff[0x100], *cp; /* Initialize I2C */ - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* Read 256 bytes in EEPROM */ i2c_read (0x50, 0, 1, buff, 0x100); |