diff options
Diffstat (limited to 'board/tqc/tqm834x/tqm834x.c')
| -rw-r--r-- | board/tqc/tqm834x/tqm834x.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index 278780dde5..106cac2448 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -67,7 +67,7 @@ static void set_cs_config(short cs, long config); static void set_ddr_config(void); /* Local variable */ -static volatile immap_t *im = (immap_t *)CFG_IMMR; +static volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; /************************************************************************** * Board initialzation after relocation to RAM. Used to detect the number @@ -92,13 +92,13 @@ phys_size_t initdram (int board_type) int cs; /* during size detection, set up the max DDRLAW size */ - im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE; im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G); /* set CS bounds to maximum size */ for(cs = 0; cs < 4; ++cs) { set_cs_bounds(cs, - CFG_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS), + CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS), DDR_MAX_SIZE_PER_CS); set_cs_config(cs, INITIAL_CS_CONFIG); @@ -122,7 +122,7 @@ phys_size_t initdram (int board_type) debug("\nDetecting Bank%d\n", cs); bank_size = get_ddr_bank_size(cs, - (volatile long*)(CFG_DDR_BASE + size)); + (volatile long*)(CONFIG_SYS_DDR_BASE + size)); size += bank_size; debug("DDR Bank%d size: %d MiB\n\n", cs, bank_size >> 20); @@ -145,7 +145,7 @@ int checkboard (void) volatile immap_t * immr; u32 w, f; - immr = (immap_t *)CFG_IMMR; + immr = (immap_t *)CONFIG_SYS_IMMR; if (!(immr->reset.rcwh & HRCWH_PCI_HOST)) { printf("PCI: NOT in host mode..?!\n"); return 0; @@ -193,9 +193,9 @@ static int detect_num_flash_banks(void) tqm834x_num_flash_banks = 2; /* assume two banks */ /* Get bank 1 and 2 information */ - bank1_size = flash_get_size(CFG_FLASH_BASE, 0); + bank1_size = flash_get_size(CONFIG_SYS_FLASH_BASE, 0); debug("Bank1 size: %lu\n", bank1_size); - bank2_size = flash_get_size(CFG_FLASH_BASE + bank1_size, 1); + bank2_size = flash_get_size(CONFIG_SYS_FLASH_BASE + bank1_size, 1); debug("Bank2 size: %lu\n", bank2_size); total_size = bank1_size + bank2_size; @@ -203,8 +203,8 @@ static int detect_num_flash_banks(void) /* Seems like we've got bank 2, but maybe it's mirrored 1 */ /* Set the base addresses */ - bank1_base = (FPWV *) (CFG_FLASH_BASE); - bank2_base = (FPWV *) (CFG_FLASH_BASE + bank1_size); + bank1_base = (FPWV *) (CONFIG_SYS_FLASH_BASE); + bank2_base = (FPWV *) (CONFIG_SYS_FLASH_BASE + bank1_size); /* Put bank 2 into CFI command mode and read */ bank2_base[0x55] = 0x00980098; @@ -253,9 +253,9 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", tqm834x_num_flash_banks); /* set OR0 and BR0 */ - im->lbus.bank[0].or = CFG_OR_TIMING_FLASH | + im->lbus.bank[0].or = CONFIG_SYS_OR_TIMING_FLASH | (-(total_size) & OR_GPCM_AM); - im->lbus.bank[0].br = (CFG_FLASH_BASE & BR_BA) | + im->lbus.bank[0].br = (CONFIG_SYS_FLASH_BASE & BR_BA) | (BR_MS_GPCM | BR_PS_32 | BR_V); return (0); |