diff options
Diffstat (limited to 'board/amcc/canyonlands/canyonlands.c')
| -rw-r--r-- | board/amcc/canyonlands/canyonlands.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 47667eeec3..e9186f868d 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -29,11 +29,11 @@ #include <asm/4xx_pcie.h> #include <asm/gpio.h> -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ DECLARE_GLOBAL_DATA_PTR; -#define CFG_BCSR3_PCIE 0x10 +#define CONFIG_SYS_BCSR3_PCIE 0x10 #define BOARD_CANYONLANDS_PCIE 1 #define BOARD_CANYONLANDS_SATA 2 @@ -86,7 +86,7 @@ int board_early_init_f(void) SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | SDR0_CUST0_NDFC_BAC_ENCODE(3) | - (0x80000000 >> (28 + CFG_NAND_CS)); + (0x80000000 >> (28 + CONFIG_SYS_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); /* @@ -99,13 +99,13 @@ int board_early_init_f(void) mtsdr(SDR0_PCI0, 0xe0000000); /* Enable ethernet and take out of reset */ - out_8((void *)CFG_BCSR_BASE + 6, 0); + out_8((void *)CONFIG_SYS_BCSR_BASE + 6, 0); /* Remove NOR-FLASH, NAND-FLASH & EEPROM hardware write protection */ - out_8((void *)CFG_BCSR_BASE + 5, 0); + out_8((void *)CONFIG_SYS_BCSR_BASE + 5, 0); /* Enable USB host & USB-OTG */ - out_8((void *)CFG_BCSR_BASE + 7, 0); + out_8((void *)CONFIG_SYS_BCSR_BASE + 7, 0); mtsdr(SDR0_SRST1, 0); /* Pull AHB out of reset default=1 */ @@ -158,7 +158,7 @@ int checkboard(void) gd->board_type = BOARD_GLACIER; } else { printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); - if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE) + if (in_8((void *)(CONFIG_SYS_BCSR_BASE + 3)) & CONFIG_SYS_BCSR3_PCIE) gd->board_type = BOARD_CANYONLANDS_PCIE; else gd->board_type = BOARD_CANYONLANDS_SATA; @@ -175,7 +175,7 @@ int checkboard(void) break; } - printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0))); + printf(", Rev. %X", in_8((void *)(CONFIG_SYS_BCSR_BASE + 0))); if (s != NULL) { puts(", serial# "); @@ -208,7 +208,7 @@ u32 ddr_clktr(u32 default_val) { */ phys_size_t initdram(int board_type) { - return CFG_MBYTES_SDRAM << 20; + return CONFIG_SYS_MBYTES_SDRAM << 20; } #endif @@ -219,7 +219,7 @@ phys_size_t initdram(int board_type) * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. */ -#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { /* @@ -234,7 +234,7 @@ void pci_target_init(struct pci_controller * hose ) * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. */ - out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE); + out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); out_le32((void *)PCIX0_PIM0LAH, 0); out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); out_le32((void *)PCIX0_BAR0, 0); @@ -242,12 +242,12 @@ void pci_target_init(struct pci_controller * hose ) /* * Program the board's subsystem id/vendor id */ - out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID); + out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); } -#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ #if defined(CONFIG_PCI) /* @@ -314,9 +314,9 @@ void pcie_setup_hoses(int busno) /* setup mem resource */ pci_set_region(hose->regions + 0, - CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, - CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, - CFG_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMSIZE, PCI_REGION_MEM); hose->region_count = 1; pci_register_hose(hose); @@ -362,16 +362,16 @@ int board_early_init_r (void) /* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */ #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtebc(pb3cr, CFG_FLASH_BASE_PHYS_L | 0xda000); + mtebc(pb3cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); #else - mtebc(pb0cr, CFG_FLASH_BASE_PHYS_L | 0xda000); + mtebc(pb0cr, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); #endif /* Remove TLB entry of boot EBC mapping */ - remove_tlb(CFG_BOOT_BASE_ADDR, 16 << 20); + remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20); /* Add TLB entry for 0xfc00.0000 -> 0x4.cc00.0000 */ - program_tlb(CFG_FLASH_BASE_PHYS, CFG_FLASH_BASE, CFG_FLASH_SIZE, + program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE); /* @@ -427,9 +427,9 @@ int misc_init_r(void) * Disable square wave output: Batterie will be drained * quickly, when this output is not disabled */ - val = i2c_reg_read(CFG_I2C_RTC_ADDR, 0xa); + val = i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, 0xa); val &= ~0x40; - i2c_reg_write(CFG_I2C_RTC_ADDR, 0xa, val); + i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0xa, val); return 0; } @@ -445,7 +445,7 @@ void ft_board_setup(void *blob, bd_t *bd) /* Fixup NOR mapping */ val[0] = 0; /* chip select number */ val[1] = 0; /* always 0 */ - val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */ + val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up this address */ val[3] = gd->bd->bi_flashsize; rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", val, sizeof(val), 1); |