diff options
Diffstat (limited to 'arch/arm/cpu')
26 files changed, 285 insertions, 250 deletions
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index eec8bee7eb..9a6f6cbee8 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -160,6 +160,7 @@ next: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 #ifdef CONFIG_NAND_SPL @@ -186,22 +187,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -210,7 +211,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -221,10 +222,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -233,7 +234,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -251,7 +252,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -280,7 +281,7 @@ jump_2_ram: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index cd8f01637a..237dcfef1b 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -223,6 +223,7 @@ skip_tcmdisable: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -240,22 +241,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -264,7 +265,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -275,10 +276,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -287,7 +288,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -343,7 +344,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -372,7 +373,7 @@ _nand_boot: .word nand_boot add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 46050dab6e..abfa124638 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -138,6 +138,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -155,22 +156,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -179,7 +180,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -190,10 +191,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -202,7 +203,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -220,7 +221,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -244,7 +245,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm920t/at91/reset.c b/arch/arm/cpu/arm920t/at91/reset.c index ce9c156154..51043ecddb 100644 --- a/arch/arm/cpu/arm920t/at91/reset.c +++ b/arch/arm/cpu/arm920t/at91/reset.c @@ -35,7 +35,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/at91_st.h> -void board_reset(void) __attribute__((__weak__)); +void __attribute__((weak)) board_reset(void) +{ + /* true empty function for defining weak symbol */ +} void reset_cpu(ulong ignored) { @@ -45,8 +48,7 @@ void reset_cpu(ulong ignored) serial_exit(); #endif - if (board_reset) - board_reset(); + board_reset(); /* Reset the cpu by setting up the watchdog timer */ writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2), diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/cpu/arm920t/at91/timer.c index 91377d47a6..d9a024fc0e 100644 --- a/arch/arm/cpu/arm920t/at91/timer.c +++ b/arch/arm/cpu/arm920t/at91/timer.c @@ -32,17 +32,16 @@ #include <common.h> -#include <asm/io.h> -#include <asm/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> #include <asm/arch/at91_tc.h> #include <asm/arch/at91_pmc.h> +DECLARE_GLOBAL_DATA_PTR; + /* the number of clocks per CONFIG_SYS_HZ */ #define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ) -static u32 timestamp; -static u32 lastinc; - int timer_init(void) { at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE; @@ -64,8 +63,8 @@ int timer_init(void) writel(TIMER_LOAD_VAL, &tc->tc[0].rc); writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr); - lastinc = 0; - timestamp = 0; + gd->lastinc = 0; + gd->tbl = 0; return 0; } @@ -86,7 +85,7 @@ ulong get_timer(ulong base) void set_timer(ulong t) { - timestamp = t; + gd->tbl = t; } void __udelay(unsigned long usec) @@ -98,8 +97,8 @@ void reset_timer_masked(void) { /* reset time */ at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE; - lastinc = readl(&tc->tc[0].cv) & 0x0000ffff; - timestamp = 0; + gd->lastinc = readl(&tc->tc[0].cv) & 0x0000ffff; + gd->tbl = 0; } ulong get_timer_raw(void) @@ -109,16 +108,16 @@ ulong get_timer_raw(void) now = readl(&tc->tc[0].cv) & 0x0000ffff; - if (now >= lastinc) { + if (now >= gd->lastinc) { /* normal mode */ - timestamp += now - lastinc; + gd->tbl += now - gd->lastinc; } else { /* we have an overflow ... */ - timestamp += now + TIMER_LOAD_VAL - lastinc; + gd->tbl += now + TIMER_LOAD_VAL - gd->lastinc; } - lastinc = now; + gd->lastinc = now; - return timestamp; + return gd->tbl; } ulong get_timer_masked(void) diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 01edb9bdcb..08f178de10 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -184,6 +184,7 @@ copyex: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -201,22 +202,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -225,7 +226,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -236,10 +237,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -248,7 +249,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -266,7 +267,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -297,7 +298,7 @@ _nand_boot_ofs: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index ce590a7038..2c0c869426 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -175,6 +175,7 @@ poll1: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -192,22 +193,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -216,7 +217,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -227,10 +228,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -239,7 +240,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -257,7 +258,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -288,7 +289,7 @@ _nand_boot_ofs: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index f699f4d489..c1822b713d 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -204,6 +204,11 @@ void at91_macb_hw_init(void) #else at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* ETX2 */ at91_set_b_periph(AT91_PIO_PORTA, 24, 0); /* ETX3 */ +#if defined(CONFIG_AT91SAM9G20) + /* 9G20 BOOT ROM initializes those pins to multi-drive, undo that */ + at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 0); + at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 0); +#endif #endif at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* ETXER */ #endif diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c index 9da7443f30..1c6fa4ae87 100644 --- a/arch/arm/cpu/arm926ejs/davinci/timer.c +++ b/arch/arm/cpu/arm926ejs/davinci/timer.c @@ -40,6 +40,8 @@ #include <common.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR; + struct davinci_timer { u_int32_t pid12; u_int32_t emumgt; @@ -57,11 +59,9 @@ struct davinci_timer { static struct davinci_timer * const timer = (struct davinci_timer *)CONFIG_SYS_TIMERBASE; -#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) -#define TIM_CLK_DIV 16 +#define TIMER_LOAD_VAL 0xffffffff -static ulong timestamp; -static ulong lastinc; +#define TIM_CLK_DIV 16 int timer_init(void) { @@ -71,72 +71,51 @@ int timer_init(void) writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr); writel(0x0, &timer->tim34); writel(TIMER_LOAD_VAL, &timer->prd34); - lastinc = 0; - timestamp = 0; writel(2 << 22, &timer->tcr); + gd->timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV; + gd->timer_reset_value = 0; return(0); } void reset_timer(void) { - writel(0x0, &timer->tcr); - writel(0x0, &timer->tim34); - lastinc = 0; - timestamp = 0; - writel(2 << 22, &timer->tcr); + gd->timer_reset_value = get_ticks(); } -static ulong get_timer_raw(void) +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) { - ulong now = readl(&timer->tim34); - - if (now >= lastinc) { - /* normal mode */ - timestamp += now - lastinc; - } else { - /* overflow ... */ - timestamp += now + TIMER_LOAD_VAL - lastinc; - } - lastinc = now; - return timestamp; + unsigned long now = readl(&timer->tim34); + + /* increment tbu if tbl has rolled over */ + if (now < gd->tbl) + gd->tbu++; + gd->tbl = now; + + return (((unsigned long long)gd->tbu) << 32) | gd->tbl; } ulong get_timer(ulong base) { - return((get_timer_raw() / (TIMER_LOAD_VAL / TIM_CLK_DIV)) - base); -} + unsigned long long timer_diff; -void set_timer(ulong t) -{ - timestamp = t; + timer_diff = get_ticks() - gd->timer_reset_value; + + return (timer_diff / (gd->timer_rate_hz / CONFIG_SYS_HZ)) - base; } void __udelay(unsigned long usec) { - ulong tmo; - ulong endtime; - signed long diff; - - tmo = CONFIG_SYS_HZ_CLOCK / 1000; - tmo *= usec; - tmo /= (1000 * TIM_CLK_DIV); - - endtime = get_timer_raw() + tmo; + unsigned long long endtime; - do { - ulong now = get_timer_raw(); - diff = endtime - now; - } while (diff >= 0); -} + endtime = ((unsigned long long)usec * gd->timer_rate_hz) / 1000000UL; + endtime += get_ticks(); -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return(get_timer(0)); + while (get_ticks() < endtime) + ; } /* diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index b80a389ed9..c6e114634a 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -260,4 +260,16 @@ void mx25_fec_init_pins (void) writel (outpadctl, &padctl->pad_fec_tdata1); } + +void imx_get_mac_from_fuse(unsigned char *mac) +{ + int i; + struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; + struct fuse_bank *bank = &iim->bank[0]; + struct fuse_bank0_regs *fuse = + (struct fuse_bank0_regs *)bank->fuse_regs; + + for (i = 0; i < 6; i++) + mac[i] = readl(&fuse->mac_addr[i]) & 0xff; +} #endif /* CONFIG_FEC_MXC */ diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c index ae2ce5841c..27642bfe7d 100644 --- a/arch/arm/cpu/arm926ejs/mx27/generic.c +++ b/arch/arm/cpu/arm926ejs/mx27/generic.c @@ -313,6 +313,18 @@ void mx27_fec_init_pins(void) for (i = 0; i < ARRAY_SIZE(mode); i++) imx_gpio_mode(mode[i]); } + +void imx_get_mac_from_fuse(unsigned char *mac) +{ + int i; + struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; + struct fuse_bank *bank = &iim->bank[0]; + struct fuse_bank0_regs *fuse = + (struct fuse_bank0_regs *)bank->fuse_regs; + + for (i = 0; i < 6; i++) + mac[6 - 1 - i] = readl(&fuse->mac_addr[i]) & 0xff; +} #endif /* CONFIG_FEC_MXC */ #ifdef CONFIG_MXC_MMC diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 6dcc9b4d67..55192521b7 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -174,6 +174,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -191,22 +192,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -215,7 +216,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -226,10 +227,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -238,7 +239,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -256,7 +257,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -287,7 +288,7 @@ _nand_boot_ofs: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index f4950f7072..f9c947024f 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -146,6 +146,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -163,22 +164,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -187,7 +188,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -198,10 +199,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -210,7 +211,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -228,7 +229,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -254,7 +255,7 @@ _nand_boot: .word nand_boot add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index fcaba30f58..d28e745b2d 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -142,6 +142,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -159,22 +160,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -183,7 +184,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -194,10 +195,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -206,7 +207,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -224,7 +225,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -255,7 +256,7 @@ _nand_boot_ofs: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 7c7a565665..290011923e 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -100,6 +100,20 @@ int cpu_eth_init(bd_t *bis) return rc; } +#if defined(CONFIG_FEC_MXC) +void imx_get_mac_from_fuse(unsigned char *mac) +{ + int i; + struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; + struct fuse_bank *bank = &iim->bank[1]; + struct fuse_bank1_regs *fuse = + (struct fuse_bank1_regs *)bank->fuse_regs; + + for (i = 0; i < 6; i++) + mac[i] = readl(&fuse->mac_addr[i]) & 0xff; +} +#endif + /* * Initializes on-chip MMC controllers. * to override, implement board_mmc_init() diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 6b8cf7ba2d..9beebb1e74 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -35,8 +35,8 @@ #include <common.h> #include <asm/io.h> -static ulong timestamp; -static ulong lastinc; +DECLARE_GLOBAL_DATA_PTR; + static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; /* @@ -74,7 +74,7 @@ ulong get_timer(ulong base) void set_timer(ulong t) { - timestamp = t; + gd->tbl = t; } /* delay x useconds */ @@ -96,8 +96,8 @@ void __udelay(unsigned long usec) void reset_timer_masked(void) { /* reset time, capture current incrementer value time */ - lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); - timestamp = 0; /* start "advancing" time stamp from 0 */ + gd->lastinc = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); + gd->tbl = 0; /* start "advancing" time stamp from 0 */ } ulong get_timer_masked(void) @@ -105,14 +105,14 @@ ulong get_timer_masked(void) /* current tick value */ ulong now = readl(&timer_base->tcrr) / (TIMER_CLOCK / CONFIG_SYS_HZ); - if (now >= lastinc) /* normal mode (non roll) */ + if (now >= gd->lastinc) /* normal mode (non roll) */ /* move stamp fordward with absoulte diff ticks */ - timestamp += (now - lastinc); + gd->tbl += (now - gd->lastinc); else /* we have rollover of incrementer */ - timestamp += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ)) - - lastinc) + now; - lastinc = now; - return timestamp; + gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ)) + - gd->lastinc) + now; + gd->lastinc = now; + return gd->tbl; } /* diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index 0870857ede..30856372b3 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -29,6 +29,7 @@ #include <asm/arch/sys_proto.h> #include <asm/arch/emif4.h> +DECLARE_GLOBAL_DATA_PTR; extern omap3_sysinfo sysinfo; static emif4_t *emif4_base = (emif4_t *)OMAP34XX_SDRC_BASE; @@ -48,10 +49,11 @@ u32 is_mem_sdr(void) */ u32 get_sdr_cs_size(u32 cs) { - u32 size; + u32 size = 0; /* TODO: Calculate the size based on EMIF4 configuration */ - size = CONFIG_SYS_CS0_SIZE; + if (cs == CS0) + size = CONFIG_SYS_CS0_SIZE; return size; } @@ -138,7 +140,6 @@ void do_emif4_init(void) */ int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); @@ -156,7 +157,6 @@ int dram_init(void) void dram_init_banksize (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index a4979ce61d..2a7970b4d0 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -37,6 +37,7 @@ #include <asm/arch/mem.h> #include <asm/arch/sys_proto.h> +DECLARE_GLOBAL_DATA_PTR; extern omap3_sysinfo sysinfo; static struct sdrc *sdrc_base = (struct sdrc *)OMAP34XX_SDRC_BASE; @@ -172,7 +173,6 @@ void do_sdrc_init(u32 cs, u32 early) */ int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); @@ -194,7 +194,6 @@ int dram_init(void) void dram_init_banksize (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0 = 0, size1 = 0; size0 = get_sdr_cs_size(CS0); diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c index 04906503e6..651fd5ddff 100644 --- a/arch/arm/cpu/armv7/s5p-common/timer.c +++ b/arch/arm/cpu/armv7/s5p-common/timer.c @@ -65,15 +65,12 @@ int timer_init(void) writel((PRESCALER_1 & 0xff) << 8, &timer->tcfg0); writel((MUX_DIV_2 & 0xf) << MUX4_DIV_SHIFT, &timer->tcfg1); - if (count_value == 0) { - /* reset initial value */ - /* count_value = 2085937.5(HZ) (per 1 sec)*/ - count_value = get_pwm_clk() / ((PRESCALER_1 + 1) * - (MUX_DIV_2 + 1)); - - /* count_value / 100 = 20859.375(HZ) (per 10 msec) */ - count_value = count_value / 100; - } + /* count_value = 2085937.5(HZ) (per 1 sec)*/ + count_value = get_pwm_clk() / ((PRESCALER_1 + 1) * + (MUX_DIV_2 + 1)); + + /* count_value / 100 = 20859.375(HZ) (per 10 msec) */ + count_value = count_value / 100; /* set count value */ writel(count_value, &timer->tcntb4); @@ -114,8 +111,11 @@ void set_timer(unsigned long t) /* delay x useconds */ void __udelay(unsigned long usec) { + struct s5p_timer *const timer = s5p_get_base_timer(); unsigned long tmo, tmp; + count_value = readl(&timer->tcntb4); + if (usec >= 1000) { /* * if "big" number, spread normalization diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 2dfdafe982..684f2d2538 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -142,6 +142,7 @@ next: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -159,24 +160,24 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start +#ifndef CONFIG_PRELOADER + cmp r0, r6 + beq clear_bss /* skip relocation */ +#endif + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 -#ifndef CONFIG_PRELOADER - beq jump_2_ram -#endif copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -185,7 +186,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -196,10 +197,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -208,7 +209,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -224,7 +225,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -246,7 +247,7 @@ jump_2_ram: add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/armv7/syslib.c b/arch/arm/cpu/armv7/syslib.c index f9ed9a307b..84d17f0f21 100644 --- a/arch/arm/cpu/armv7/syslib.c +++ b/arch/arm/cpu/armv7/syslib.c @@ -23,7 +23,6 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/sys_proto.h> /************************************************************ * sdelay() - simple spin loop. Will be constant time as diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index d1ab19bf5d..9f8c15b877 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -268,6 +268,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -285,22 +286,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -309,7 +310,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -320,10 +321,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -332,7 +333,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -350,7 +351,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -374,7 +375,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 5cf477b1a3..32dfe8b5f7 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -155,6 +155,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -172,22 +173,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -196,7 +197,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -207,10 +208,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -219,7 +220,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -237,7 +238,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -258,7 +259,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index ae358a56e6..fbd0def465 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -220,6 +220,7 @@ zerojmp: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -237,23 +238,23 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss stmfd sp!, {r0-r12} copy_loop: ldmia r0!, {r3-r5, r7-r11} /* copy from source address [r0] */ - stmia r6!, {r3-r5, r7-r11} /* copy to target address [r1] */ + stmia r1!, {r3-r5, r7-r11} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop ldmfd sp!, {r0-r12} @@ -263,7 +264,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -274,10 +275,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -286,7 +287,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -304,7 +305,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -332,7 +333,7 @@ _start_oneboot_ofs add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 8c7100c2bf..9379af67b2 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -127,6 +127,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -144,22 +145,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -168,7 +169,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -179,10 +180,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -191,7 +192,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -209,7 +210,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -233,7 +234,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 36d44da1f8..7c2db4f146 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -131,6 +131,7 @@ reset: /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) + bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ ldr r0,=0x00000000 bl board_init_f @@ -148,22 +149,22 @@ relocate_code: mov r4, r0 /* save addr_sp */ mov r5, r1 /* save addr of gd */ mov r6, r2 /* save addr of destination */ - mov r7, r2 /* save addr of destination */ /* Set up the stack */ stack_setup: mov sp, r4 adr r0, _start + cmp r0, r6 + beq clear_bss /* skip relocation */ + mov r1, r6 /* r1 <- scratch for copy_loop */ ldr r2, _TEXT_BASE ldr r3, _bss_start_ofs add r2, r0, r3 /* r2 <- source end address */ - cmp r0, r6 - beq clear_bss copy_loop: ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r6!, {r9-r10} /* copy to target address [r1] */ + stmia r1!, {r9-r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ blo copy_loop @@ -172,7 +173,7 @@ copy_loop: * fix .rel.dyn relocations */ ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r7, r0 /* r9 <- relocation offset */ + sub r9, r6, r0 /* r9 <- relocation offset */ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ add r10, r10, r0 /* r10 <- sym table in FLASH */ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ @@ -183,10 +184,10 @@ fixloop: ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ add r0, r0, r9 /* r0 <- location to fix up in RAM */ ldr r1, [r2, #4] - and r8, r1, #0xff - cmp r8, #23 /* relative fixup? */ + and r7, r1, #0xff + cmp r7, #23 /* relative fixup? */ beq fixrel - cmp r8, #2 /* absolute fixup? */ + cmp r7, #2 /* absolute fixup? */ beq fixabs /* ignore unknown type of fixup */ b fixnext @@ -195,7 +196,7 @@ fixabs: mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ add r1, r10, r1 /* r1 <- address of symbol in table */ ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r9 /* r1 <- relocated sym addr */ + add r1, r1, r9 /* r1 <- relocated sym addr */ b fixnext fixrel: /* relative fix: increase location by offset */ @@ -213,7 +214,7 @@ clear_bss: ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs ldr r3, _TEXT_BASE /* Text base */ - mov r4, r7 /* reloc addr */ + mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 mov r2, #0x00000000 /* clear */ @@ -234,7 +235,7 @@ clbss_l:str r2, [r0] /* clear loop... */ add lr, lr, r9 /* setup parameters for board_init_r */ mov r0, r5 /* gd_t */ - mov r1, r7 /* dest_addr */ + mov r1, r6 /* dest_addr */ /* jump to it ... */ mov pc, lr |