diff options
-rw-r--r-- | board/mcc200/auto_update.c | 18 | ||||
-rw-r--r-- | board/trab/auto_update.c | 16 | ||||
-rw-r--r-- | include/configs/mcc200.h | 34 |
3 files changed, 52 insertions, 16 deletions
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 6044565ff0..28e4c877b5 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -330,6 +330,8 @@ int do_auto_update(void) int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; long start, end; + +#if 0 /* disable key-press detection to speed up boot-up time */ uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0}; /* @@ -347,6 +349,7 @@ int do_auto_update(void) return 0; } +#endif au_usb_stor_curr_dev = -1; /* start USB */ if (usb_stop() < 0) { @@ -364,18 +367,21 @@ int do_auto_update(void) au_usb_stor_curr_dev = usb_stor_scan(0); if (au_usb_stor_curr_dev == -1) { debug ("No device found. Not initialized?\n"); - return -1; + res = -1; + goto xit; } /* check whether it has a partition table */ stor_dev = get_dev("usb", 0); if (stor_dev == NULL) { debug ("uknown device type\n"); - return -1; + res = -1; + goto xit; } if (fat_register_device(stor_dev, 1) != 0) { debug ("Unable to use USB %d:%d for fatls\n", au_usb_stor_curr_dev, 1); - return -1; + res = -1; + goto xit; } if (file_fat_detectfs() != 0) { debug ("file_fat_detectfs failed\n"); @@ -504,7 +510,7 @@ int do_auto_update(void) } while (res < 0); #endif } - usb_stop(); + /* restore the old state */ disable_ctrlc(old_ctrlc); #ifdef CONFIG_PROGRESSBAR @@ -517,6 +523,8 @@ int do_auto_update(void) lcd_enable(); } #endif - return 0; + xit: + usb_stop(); + return res; } #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index 92120b0d01..54d3645ffa 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -450,7 +450,7 @@ do_auto_update(void) { block_dev_desc_t *stor_dev; long sz; - int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc; + int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; long start, end; @@ -477,18 +477,21 @@ do_auto_update(void) au_usb_stor_curr_dev = usb_stor_scan(0); if (au_usb_stor_curr_dev == -1) { debug ("No device found. Not initialized?\n"); - return -1; + res = -1; + goto xit; } /* check whether it has a partition table */ stor_dev = get_dev("usb", 0); if (stor_dev == NULL) { debug ("uknown device type\n"); - return -1; + res = -1; + goto xit; } if (fat_register_device(stor_dev, 1) != 0) { debug ("Unable to use USB %d:%d for fatls\n", au_usb_stor_curr_dev, 1); - return -1; + res = -1; + goto xit; } if (file_fat_detectfs() != 0) { debug ("file_fat_detectfs failed\n"); @@ -648,9 +651,10 @@ do_auto_update(void) /* enable the power switch */ *CPLD_VFD_BK &= ~POWER_OFF; } - usb_stop(); /* restore the old state */ disable_ctrlc(old_ctrlc); - return 0; +xit: + usb_stop(); + return res; } #endif /* CONFIG_AUTO_UPDATE */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index 744f551c3e..cc2dbcdef9 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -111,11 +111,13 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_USB +#undef CONFIG_CMD_NET + /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -131,20 +133,30 @@ # define CFG__LINUX_CONSOLE "ttyS0" #else # define CFG__BOARDNAME "mcc200" -# define CFG__LINUX_CONSOLE "ttyEU7" +# define CFG__LINUX_CONSOLE "ttyEU5" #endif +/* Network */ +#define CONFIG_ETHADDR 00:17:17:ff:00:00 +#define CONFIG_IPADDR 10.76.9.29 +#define CONFIG_SERVERIP 10.76.9.1 + +#include <version.h> /* For U-Boot version */ + #define CONFIG_EXTRA_ENV_SETTINGS \ + "ubootver=" U_BOOT_VERSION "\0" \ "netdev=eth0\0" \ "hostname=" CFG__BOARDNAME "\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "ramargs=setenv bootargs root=/dev/mtdblock2 " \ + "rootfstype=cramfs\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ + "console=${console},${baudrate} " \ + "ubootver=${ubootver} board=${board}\0" \ "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addcons;" \ @@ -156,6 +168,7 @@ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \ "text_base=" MK_STR(TEXT_BASE) "\0" \ + "kernel_addr=0xFC0C0000\0" \ "update=protect off ${text_base} +${filesize};" \ "era ${text_base} +${filesize};" \ "cp.b 200000 ${text_base} ${filesize}\0" \ @@ -256,7 +269,7 @@ /* * Ethernet configuration */ -#define CONFIG_MPC5xxx_FEC 1 +/*#define CONFIG_MPC5xxx_FEC 1*/ /* * Define CONFIG_FEC_10MBIT to force FEC at 10Mb */ @@ -337,6 +350,13 @@ #define CFG_CS1_SIZE 0x00001000 #define CFG_CS1_CFG 0x1d300 +/* Leica - build revision resistors */ +/* +#define CFG_CS3_START 0x80020000 +#define CFG_CS3_SIZE 0x00000004 +#define CFG_CS3_CFG 0x1d300 +*/ + /* * Select one of quarts as a default * console. If undefined - PSC console @@ -392,4 +412,8 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00005000 +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR "432" +#define CONFIG_SILENT_CONSOLE 1 + #endif /* __CONFIG_H */ |