diff options
| -rw-r--r-- | board/freescale/mpc8569mds/bcsr.h | 1 | ||||
| -rw-r--r-- | board/freescale/mpc8569mds/mpc8569mds.c | 98 |
2 files changed, 78 insertions, 21 deletions
diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h index 2ed57d8527..179a54c257 100644 --- a/board/freescale/mpc8569mds/bcsr.h +++ b/board/freescale/mpc8569mds/bcsr.h @@ -68,6 +68,7 @@ #define BCSR15_SMII6_DIS 0x08 #define BCSR15_SMII8_DIS 0x04 +#define BCSR15_QEUART_EN 0x01 #define BCSR16_UPC1_DEV2 0x02 diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 7d1d02e7d2..ef99a751fd 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -154,6 +154,12 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 10, 2, 0, 3}, /* UART1_CTS_B */ {5, 11, 1, 0, 2}, /* UART1_RTS_B */ + /* QE UART */ + {0, 19, 1, 0, 2}, /* QEUART_TX */ + {1, 17, 2, 0, 3}, /* QEUART_RX */ + {0, 25, 1, 0, 1}, /* QEUART_RTS */ + {1, 23, 2, 0, 1}, /* QEUART_CTS */ + /* SPI Flash, M25P40 */ {4, 27, 3, 0, 1}, /* SPI_MOSI */ {4, 28, 3, 0, 1}, /* SPI_MISO */ @@ -311,7 +317,26 @@ local_bus_init(void) out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000); } -#ifdef CONFIG_FSL_ESDHC +static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias) +{ + const char *status = "disabled"; + int off; + int err; + + off = fdt_path_offset(blob, alias); + if (off < 0) { + printf("WARNING: could not find %s alias: %s.\n", alias, + fdt_strerror(off)); + return; + } + + err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); + if (err) { + printf("WARNING: could not set status for serial0: %s.\n", + fdt_strerror(err)); + return; + } +} /* * Because of an erratum in prototype boards it is impossible to use eSDHC @@ -337,6 +362,53 @@ static int esdhc_disables_uart0(void) hwconfig_subarg_cmp("esdhc", "mode", "4-bits"); } +static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd) +{ + u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE; + const char *devtype = "serial"; + const char *compat = "ucc_uart"; + const char *clk = "brg9"; + u32 portnum = 0; + int off = -1; + + if (!hwconfig("qe_uart")) + return; + + if (hwconfig("esdhc") && esdhc_disables_uart0()) { + printf("QE UART: won't enable with esdhc.\n"); + return; + } + + fdt_board_disable_serial(blob, bd, "serial1"); + + while (1) { + const u32 *idx; + int len; + + off = fdt_node_offset_by_compatible(blob, off, "ucc_geth"); + if (off < 0) { + printf("WARNING: unable to fixup device tree for " + "QE UART\n"); + return; + } + + idx = fdt_getprop(blob, off, "cell-index", &len); + if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2)) + continue; + break; + } + + fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1); + fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1); + fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1); + fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1); + fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum)); + + setbits_8(&bcsr[15], BCSR15_QEUART_EN); +} + +#ifdef CONFIG_FSL_ESDHC + int board_mmc_init(bd_t *bd) { struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR; @@ -376,31 +448,14 @@ int board_mmc_init(bd_t *bd) static void fdt_board_fixup_esdhc(void *blob, bd_t *bd) { const char *status = "disabled"; - int off; - int err; + int off = -1; if (!hwconfig("esdhc")) return; - if (!esdhc_disables_uart0()) - goto disable_i2c2; - - off = fdt_path_offset(blob, "serial0"); - if (off < 0) { - printf("WARNING: could not find serial0 alias: %s.\n", - fdt_strerror(off)); - goto disable_i2c2; - } - - err = fdt_setprop(blob, off, "status", status, strlen(status) + 1); - if (err) { - printf("WARNING: could not set status for serial0: %s.\n", - fdt_strerror(err)); - return; - } + if (esdhc_disables_uart0()) + fdt_board_disable_serial(blob, bd, "serial0"); -disable_i2c2: - off = -1; while (1) { const u32 *idx; int len; @@ -566,5 +621,6 @@ void ft_board_setup(void *blob, bd_t *bd) ft_fsl_pci_setup(blob, "pci1", &pcie1_hose); #endif fdt_board_fixup_esdhc(blob, bd); + fdt_board_fixup_qe_uart(blob, bd); } #endif |