Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

7 files changed, 758 insertions, 21 deletions

diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index 2bb50b47f5..e5a3b2c170 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -75,7 +75,7 @@ typedef	struct	global_data {
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 pci_clk;
-#if defined(CONFIG_MPC837X)
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC831X)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 #endif
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index df24a6e874..77c09db6b8 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -52,23 +52,28 @@ typedef struct sysconf83xx {
 	law83xx_t lblaw[4];	/* LBIU local access window */
 	u8 res2[0x20];
 	law83xx_t pcilaw[2];	/* PCI local access window */
-	u8 res3[0x30];
+	u8 res3[0x10];
+	law83xx_t pcielaw[2];	/* PCI Express local access window */
+	u8 res4[0x10];
 	law83xx_t ddrlaw[2];	/* DDR local access window */
-	u8 res4[0x50];
+	u8 res5[0x50];
 	u32 sgprl;		/* System General Purpose Register Low */
 	u32 sgprh;		/* System General Purpose Register High */
 	u32 spridr;		/* System Part and Revision ID Register */
-	u8 res5[0x04];
+	u8 res6[0x04];
 	u32 spcr;		/* System Priority Configuration Register */
 	u32 sicrl;		/* System I/O Configuration Register Low */
 	u32 sicrh;		/* System I/O Configuration Register High */
-	u8 res6[0x04];
+	u8 res7[0x04];
 	u32 sidcr0;		/* System I/O Delay Configuration Register 0 */
 	u32 sidcr1;		/* System I/O Delay Configuration Register 1 */
 	u32 ddrcdr;		/* DDR Control Driver Register */
 	u32 ddrdsr;		/* DDR Debug Status Register */
 	u32 obir;		/* Output Buffer Impedance Register */
-	u8 res7[0xCC];
+	u8 res8[0xC];
+	u32 pecr1;		/* PCI Express control register 1 */
+	u32 pecr2;		/* PCI Express control register 2 */
+	u8 res9[0xB8];
 } sysconf83xx_t;
 
 /*
@@ -503,8 +508,110 @@ typedef struct security83xx {
 /*
  *  PCI Express
  */
+struct pex_inbound_window {
+	u32 ar;
+	u32 tar;
+	u32 barl;
+	u32 barh;
+};
+
+struct pex_outbound_window {
+	u32 ar;
+	u32 bar;
+	u32 tarl;
+	u32 tarh;
+};
+
+struct pex_csb_bridge {
+	u32 pex_csb_ver;
+	u32 pex_csb_cab;
+	u32 pex_csb_ctrl;
+	u8 res0[8];
+	u32 pex_dms_dstmr;
+	u8 res1[4];
+	u32 pex_cbs_stat;
+	u8 res2[0x20];
+	u32 pex_csb_obctrl;
+	u32 pex_csb_obstat;
+	u8 res3[0x98];
+	u32 pex_csb_ibctrl;
+	u32 pex_csb_ibstat;
+	u8 res4[0xb8];
+	u32 pex_wdma_ctrl;
+	u32 pex_wdma_addr;
+	u32 pex_wdma_stat;
+	u8 res5[0x94];
+	u32 pex_rdma_ctrl;
+	u32 pex_rdma_addr;
+	u32 pex_rdma_stat;
+	u8 res6[0xd4];
+	u32 pex_ombcr;
+	u32 pex_ombdr;
+	u8 res7[0x38];
+	u32 pex_imbcr;
+	u32 pex_imbdr;
+	u8 res8[0x38];
+	u32 pex_int_enb;
+	u32 pex_int_stat;
+	u32 pex_int_apio_vec1;
+	u32 pex_int_apio_vec2;
+	u8 res9[0x10];
+	u32 pex_int_ppio_vec1;
+	u32 pex_int_ppio_vec2;
+	u32 pex_int_wdma_vec1;
+	u32 pex_int_wdma_vec2;
+	u32 pex_int_rdma_vec1;
+	u32 pex_int_rdma_vec2;
+	u32 pex_int_misc_vec;
+	u8 res10[4];
+	u32 pex_int_axi_pio_enb;
+	u32 pex_int_axi_wdma_enb;
+	u32 pex_int_axi_rdma_enb;
+	u32 pex_int_axi_misc_enb;
+	u32 pex_int_axi_pio_stat;
+	u32 pex_int_axi_wdma_stat;
+	u32 pex_int_axi_rdma_stat;
+	u32 pex_int_axi_misc_stat;
+	u8 res11[0xa0];
+	struct pex_outbound_window pex_outbound_win[4];
+	u8 res12[0x100];
+	u32 pex_epiwtar0;
+	u32 pex_epiwtar1;
+	u32 pex_epiwtar2;
+	u32 pex_epiwtar3;
+	u8 res13[0x70];
+	struct pex_inbound_window pex_inbound_win[4];
+};
+
 typedef struct pex83xx {
-	u8 fixme[0x1000];
+	u8 pex_cfg_header[0x404];
+	u32 pex_ltssm_stat;
+	u8 res0[0x30];
+	u32 pex_ack_replay_timeout;
+	u8 res1[4];
+	u32 pex_gclk_ratio;
+	u8 res2[0xc];
+	u32 pex_pm_timer;
+	u32 pex_pme_timeout;
+	u8 res3[4];
+	u32 pex_aspm_req_timer;
+	u8 res4[0x18];
+	u32 pex_ssvid_update;
+	u8 res5[0x34];
+	u32 pex_cfg_ready;
+	u8 res6[0x24];
+	u32 pex_bar_sizel;
+	u8 res7[4];
+	u32 pex_bar_sel;
+	u8 res8[0x20];
+	u32 pex_bar_pf;
+	u8 res9[0x88];
+	u32 pex_pme_to_ack_tor;
+	u8 res10[0xc];
+	u32 pex_ss_intr_mask;
+	u8 res11[0x25c];
+	struct pex_csb_bridge bridge;
+	u8 res12[0x160];
 } pex83xx_t;
 
 /*
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e4ada652b5..a04868ec67 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -309,8 +309,29 @@
 #define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
 #define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
+#define CONFIG_SYS_PCIE1_BASE		0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA0000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCIE1_CFG_BASE	0xB0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE	0x01000000
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xB1000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
+
+#define CONFIG_SYS_PCIE2_BASE		0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_BASE	0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xC0000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCIE2_CFG_BASE	0xD0000000
+#define CONFIG_SYS_PCIE2_CFG_SIZE	0x01000000
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xD1000000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
+
 #define CONFIG_PCI
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
+#define CONFIG_83XX_GENERIC_PCIE	1
 
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP		/* do pci plug-and-play */
diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h
index dbffb7121a..0dd6ef52f4 100644
--- a/include/configs/MPC837XEMDS.h
+++ b/include/configs/MPC837XEMDS.h
@@ -353,11 +353,32 @@
 #define CONFIG_SYS_PCI_SLV_MEM_BUS	0x00000000
 #define CONFIG_SYS_PCI_SLV_MEM_SIZE	0x80000000
 
+#define CONFIG_SYS_PCIE1_BASE		0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_BASE	0xA0000000
+#define CONFIG_SYS_PCIE1_CFG_SIZE	0x08000000
+#define CONFIG_SYS_PCIE1_MEM_BASE	0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xA8000000
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCIE1_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xB8000000
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000
+
+#define CONFIG_SYS_PCIE2_BASE		0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_BASE	0xC0000000
+#define CONFIG_SYS_PCIE2_CFG_SIZE	0x08000000
+#define CONFIG_SYS_PCIE2_MEM_BASE	0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xC8000000
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x10000000
+#define CONFIG_SYS_PCIE2_IO_BASE	0x00000000
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xD8000000
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00800000
+
 #ifdef CONFIG_PCI
 #ifndef __ASSEMBLY__
 extern int board_pci_host_broken(void);
 #endif
 #define CONFIG_83XX_GENERIC_PCI	1 /* Use generic PCI setup */
+#define CONFIG_83XX_GENERIC_PCIE	1
 #define CONFIG_PQ_MDS_PIB	1 /* PQ MDS Platform IO Board */
 
 #define CONFIG_HAS_FSL_DR_USB	1 /* fixup device tree for the DR USB */
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
new file mode 100644
index 0000000000..a616236b77
--- /dev/null
+++ b/include/configs/SIMPC8313.h
@@ -0,0 +1,544 @@
+/*
+ * Copyright (C) Sheldon Instruments, Inc. 2008
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*
+ * simpc8313 board configuration file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_NAND_U_BOOT
+
+#define CONFIG_E300			1
+#define CONFIG_MPC83XX			1
+#define CONFIG_MPC831X			1
+#define CONFIG_MPC8313			1
+
+#define CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * On-board devices
+ *
+ * TSEC1 is Marvell PHY 88E1118
+ */
+
+#define CONFIG_SYS_33MHZ
+
+#define CONFIG_83XX_CLKIN		33333333	/* in Hz */
+
+#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN
+
+#define CONFIG_SYS_IMMR			0xE0000000
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_DEFAULT_IMMR		CONFIG_SYS_IMMR
+#endif
+
+#define CONFIG_SYS_MEMTEST_START	0x00001000
+#define CONFIG_SYS_MEMTEST_END		0x07f00000
+
+#define CONFIG_SYS_ACR_PIPE_DEP		3	/* Arbiter pipeline depth (0-3) */
+#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+
+/*
+ * Device configurations
+ */
+#define CONFIG_TSEC1
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_SYS_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
+#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_MAX_MEM_MAPPED		(512 << 20)
+
+#define CONFIG_SYS_DDRCDR		( DDRCDR_EN \
+					| DDRCDR_PZ_NOMZ \
+					| DDRCDR_NZ_NOMZ \
+					| DDRCDR_M_ODR )
+					/* 0x73000002 TODO ODR & DRN ? */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#if !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_SYS_INIT_RAM_LOCK	1
+#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000	/* Initial RAM address */
+#define CONFIG_SYS_INIT_RAM_END		0x1000		/* End of used area in RAM*/
+
+#define CONFIG_SYS_GBL_DATA_SIZE	0x100		/* num bytes initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ */
+#define CONFIG_SYS_LCRR		(LCRR_DBYP | LCRR_EADC_1 | LCRR_CLKDIV_2)
+#define CONFIG_SYS_LBC_LBCR	(0x00040000 /* TODO */ \
+				| (0xFF << LBCR_BMT_SHIFT) \
+				| 0xF )	/* 0x0004ff0f */
+
+#define CONFIG_SYS_LBC_MRTPR	0x20000000	/* LB refresh timer prescal, 266MHz/32 */
+
+/* drivers/mtd/nand/nand.c */
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_NAND_BASE		0xFFF00000
+#else
+#define CONFIG_SYS_NAND_BASE		0xE2800000
+#endif
+
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS			1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND 		1
+#define CONFIG_NAND_FSL_ELBC		1
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START	0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
+
+#define CONFIG_SYS_NAND_BR_PRELIM	( CONFIG_SYS_NAND_BASE \
+					| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
+					| BR_PS_8		/* Port Size = 8 bit */ \
+					| BR_MS_FCM		/* MSEL = FCM */ \
+					| BR_V )		/* valid */
+
+#ifdef CONFIG_NAND_SP
+#define CONFIG_SYS_NAND_OR_PRELIM	( 0xFFFF8000	/* length 32K */ \
+					| OR_FCM_CSCT \
+					| OR_FCM_CST \
+					| OR_FCM_CHT \
+					| OR_FCM_SCY_1 \
+					| OR_FCM_TRLX \
+					| OR_FCM_EHTR )
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x8000000E	/* 32KB */
+#define CONFIG_SYS_NAND_PAGE_SIZE	(512)		/* NAND chip page size */
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(16 << 10)	/* NAND chip block size */
+#define NAND_CACHE_PAGES		32
+#elif defined(CONFIG_NAND_LP)
+#define CONFIG_SYS_NAND_OR_PRELIM	( 0xFFFC0000	/* length 256K */ \
+					| OR_FCM_PGS \
+					| OR_FCM_CSCT \
+					| OR_FCM_CST \
+					| OR_FCM_CHT \
+					| OR_FCM_SCY_1 \
+					| OR_FCM_TRLX \
+					| OR_FCM_EHTR )
+#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000011	/* 256KB */
+#define CONFIG_SYS_NAND_PAGE_SIZE	(2048)		/* NAND chip page size */
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)	/* NAND chip block size */
+#define NAND_CACHE_PAGES		64
+#else
+#error Page size of NAND not defined.
+#endif /* CONFIG_NAND_SP */
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SYS_NAND_BLOCK_SIZE
+
+#define CONFIG_SYS_BR0_PRELIM		CONFIG_SYS_NAND_BR_PRELIM
+#define CONFIG_SYS_OR0_PRELIM		CONFIG_SYS_NAND_OR_PRELIM
+
+#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_NAND_BASE
+
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM	CONFIG_SYS_LBLAWBAR0_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR0_PRELIM
+
+/*
+ * JFFS2 configuration
+ */
+#define CONFIG_JFFS2_NAND
+#define CONFIG_JFFS2_DEV	"nand0"
+
+/* mtdparts command line support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nand0=nand0"
+#define MTDPARTS_DEFAULT	"mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)"
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT		1
+#define CONFIG_OF_BOARD_SETUP		1
+#define CONFIG_OF_STDOUT_VIA_ALIAS	1
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CONFIG_SYS_NS16550_COM1		(CONFIG_SYS_IMMR+0x4500)
+#define CONFIG_SYS_NS16550_COM2		(CONFIG_SYS_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+/* I2C */
+#define CONFIG_HARD_I2C			/* I2C with hardware support*/
+#define CONFIG_FSL_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_NOPROBES		{{0,0x69}} /* Don't probe these addrs */
+#define CONFIG_SYS_I2C_OFFSET		0x3000
+#define CONFIG_SYS_I2C2_OFFSET		0x3100
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
+#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
+#define CONFIG_SYS_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_MMIO_BASE	0x90000000
+#define CONFIG_SYS_PCI1_MMIO_PHYS	CONFIG_SYS_PCI1_MMIO_BASE
+#define CONFIG_SYS_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CONFIG_SYS_PCI1_IO_BASE		0x00000000
+#define CONFIG_SYS_PCI1_IO_PHYS		0xE2000000
+#define CONFIG_SYS_PCI1_IO_SIZE		0x00100000	/* 1M */
+
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID	0x1057	/* Motorola */
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_GMII			/* MII PHY management */
+
+#ifdef CONFIG_TSEC1
+#define CONFIG_HAS_ETH0
+#define CONFIG_TSEC1_NAME		"TSEC0"
+#define CONFIG_SYS_TSEC1_OFFSET		0x24000
+#define TSEC1_PHY_ADDR			0x0
+#define TSEC1_FLAGS			TSEC_GIGABIT
+#define TSEC1_PHYIDX			0
+#endif
+
+#ifdef CONFIG_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_TSEC2_NAME		"TSEC1"
+#define CONFIG_SYS_TSEC2_OFFSET		0x25000
+#define TSEC2_PHY_ADDR			4
+#define TSEC2_FLAGS			TSEC_GIGABIT
+#define TSEC2_PHYIDX			0
+#endif
+
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME			"TSEC1"
+
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1337
+#define CONFIG_SYS_I2C_RTC_ADDR		0x68
+
+/*
+ * Environment
+ */
+#if defined(CONFIG_NAND_U_BOOT)
+	#define CONFIG_ENV_IS_IN_NAND		1
+	#define CONFIG_ENV_OFFSET		(768 * 1024)
+	#define CONFIG_ENV_SECT_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+	#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+	#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+	#define CONFIG_ENV_RANGE		(CONFIG_ENV_SECT_SIZE * 4)
+	#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+#elif !defined(CONFIG_SYS_RAMBOOT)
+	#define CONFIG_ENV_IS_IN_FLASH		1
+	#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+	#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64K(one sector) for env */
+	#define CONFIG_ENV_SIZE			0x2000
+
+/* Address and size of Redundant Environment Sector */
+#else
+	#define CONFIG_ENV_IS_NOWHERE		1	/* Store ENV in memory only */
+	#define CONFIG_ENV_ADDR			(CONFIG_SYS_MONITOR_BASE - 0x1000)
+	#define CONFIG_ENV_SIZE			0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO			1	/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE		1	/* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_JFFS2
+
+#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT)
+	#undef CONFIG_CMD_ENV
+	#undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING		1
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_LOAD_ADDR		0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		1024		/* Console I/O Buffer Size */
+
+#define CONFIG_SYS_PBSIZE		( CONFIG_SYS_CBSIZE		\
+					+ sizeof(CONFIG_SYS_PROMPT)	\
+					+ 16 )	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux*/
+
+#define CONFIG_SYS_RCWH_PCIHOST		0x80000000	/* PCIHOST */
+
+#define CONFIG_SYS_HRCW_LOW		( HRCWL_LCL_BUS_TO_SCB_CLK_1X1	\
+					| 0x20000000 /* reserved */	\
+					| HRCWL_DDR_TO_SCB_CLK_2X1	\
+					| HRCWL_CSB_TO_CLKIN_4X1	\
+					| HRCWL_CORE_TO_CSB_2_5X1 )
+
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_83XX_CLKIN * 4)
+
+#define CONFIG_SYS_HRCW_HIGH_BASE	( HRCWH_PCI_HOST		\
+					| HRCWH_PCI1_ARBITER_ENABLE	\
+					| HRCWH_CORE_ENABLE		\
+					| HRCWH_BOOTSEQ_DISABLE		\
+					| HRCWH_SW_WATCHDOG_DISABLE	\
+					| HRCWH_TSEC1M_IN_RGMII		\
+					| HRCWH_TSEC2M_IN_RGMII		\
+					| HRCWH_BIG_ENDIAN		\
+					| HRCWH_LALE_NORMAL )
+
+#ifdef CONFIG_NAND_LP
+#define CONFIG_SYS_HRCW_HIGH	( CONFIG_SYS_HRCW_HIGH_BASE		\
+				| HRCWH_FROM_0XFFF00100			\
+				| HRCWH_ROM_LOC_NAND_LP_8BIT		\
+				| HRCWH_RL_EXT_NAND)
+#else
+#define CONFIG_SYS_HRCW_HIGH	( CONFIG_SYS_HRCW_HIGH_BASE		\
+				| HRCWH_FROM_0XFFF00100			\
+				| HRCWH_ROM_LOC_NAND_SP_8BIT		\
+				| HRCWH_RL_EXT_NAND )
+#endif
+
+/* System IO Config */
+#define CONFIG_SYS_SICRH	( SICRH_ETSEC2_B	\
+				| SICRH_ETSEC2_C	\
+				| SICRH_ETSEC2_D	\
+				| SICRH_ETSEC2_E	\
+				| SICRH_ETSEC2_F	\
+				| SICRH_ETSEC2_G	\
+				| SICRH_TSOBI1		\
+				| SICRH_TSOBI2 )
+#define CONFIG_SYS_SICRL	(SICRL_USBDR		\
+				| SICRL_ETSEC2_A )
+
+#define CONFIG_SYS_HID0_INIT	0x000000000
+#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK	\
+				| HID0_ENABLE_DYNAMIC_POWER_MANAGMENT )
+
+#define CONFIG_SYS_HID2		HID2_HBE
+
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
+/* DDR @ 0x00000000 */
+#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT1L	((CONFIG_SYS_SDRAM_BASE + 0x10000000) | BATL_PP_10)
+#define CONFIG_SYS_IBAT1U	((CONFIG_SYS_SDRAM_BASE + 0x10000000) | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#define CONFIG_SYS_IBAT2L	(CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10)
+#define CONFIG_SYS_IBAT2U	(CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT3U	(CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI2 not supported on 8313 */
+#define CONFIG_SYS_IBAT4L	(0)
+#define CONFIG_SYS_IBAT4U	(0)
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
+#define CONFIG_SYS_IBAT5L	(CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CONFIG_SYS_IBAT5U	(CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CONFIG_SYS_IBAT6L	(0xF0000000 | BATL_PP_10)
+#define CONFIG_SYS_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+
+#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
+#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
+#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
+#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
+#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
+#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
+#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
+#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U
+#define CONFIG_SYS_DBAT4L	CONFIG_SYS_IBAT4L
+#define CONFIG_SYS_DBAT4U	CONFIG_SYS_IBAT4U
+#define CONFIG_SYS_DBAT5L	CONFIG_SYS_IBAT5L
+#define CONFIG_SYS_DBAT5U	CONFIG_SYS_IBAT5U
+#define CONFIG_SYS_DBAT6L	CONFIG_SYS_IBAT6L
+#define CONFIG_SYS_DBAT6U	CONFIG_SYS_IBAT6U
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_NETDEV		eth1
+
+#define CONFIG_HOSTNAME		simpc8313
+#define CONFIG_ROOTPATH		/tftpboot/
+#define CONFIG_BOOTFILE		/tftpboot/uImage
+#define CONFIG_UBOOTPATH	u-boot-nand.bin	/* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE		simpc8313.dtb
+
+#define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY	5	/* 5 second delay */
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_BOOTCOMMAND	"nand read $loadaddr kernel 600000;bootm $loadaddr - $fdtaddr"
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=" MK_STR(CONFIG_NETDEV) "\0"				\
+	"ethprime=TSEC1\0"						\
+	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+	"tftpflash=tftpboot $loadaddr $uboot; "				\
+		"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+		"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+		"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+		"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+	"fdtaddr=ae0000\0"						\
+	"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"				\
+	"console=ttyS0\0"						\
+	"setbootargs=setenv bootargs "					\
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	 \
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"	\
+	"load_uboot=tftp 100000 u-boot-nand.bin\0"			\
+	"burn_uboot=nand erase u-boot 80000; "				\
+		"nand write 100000 u-boot $filesize\0"			\
+	"update_uboot=run load_uboot;run burn_uboot\0"			\
+	"mtdids=nand0=nand0\0"						\
+	"mtdparts=mtdparts=nand0:2M(u-boot),6M(kernel),-(jffs2)\0"	\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"	\
+	"bootargs=root=/dev/mtdblock2 rootfstype=jffs2 rw "		\
+		"console=ttyS0,115200\0"				\
+	""
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv rootdev /dev/nfs;"					\
+	"run setbootargs;"						\
+	"run setipargs;"						\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND						\
+	"setenv rootdev /dev/ram;"					\
+	"run setbootargs;"						\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif	/* __CONFIG_H */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 43553f5ae6..191488aa89 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -751,9 +751,6 @@
 #define SCCR_USBDRCM_2			0x00800000
 #define SCCR_USBDRCM_3			0x00c00000
 
-#define SCCR_PCIEXP1CM			0x00300000
-#define SCCR_PCIEXP2CM			0x000c0000
-
 #define SCCR_SATA1CM			0x00003000
 #define SCCR_SATA1CM_SHIFT		12
 #define SCCR_SATACM			0x00003c00
@@ -800,6 +797,17 @@
 #define SCCR_USBDRCM_2			0x00800000
 #define SCCR_USBDRCM_3			0x00c00000
 
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM			0x000000c0
+#define SCCR_SATA1CM_SHIFT		6
+#define SCCR_SATACM			0x000000ff
+#define SCCR_SATACM_SHIFT		0
+#define SCCR_SATACM_0			0x00000000
+#define SCCR_SATACM_1			0x00000055
+#define SCCR_SATACM_2			0x000000aa
+#define SCCR_SATACM_3			0x000000ff
+#endif
+
 #define SCCR_PCIEXP1CM			0x00300000
 #define SCCR_PCIEXP1CM_SHIFT		20
 #define SCCR_PCIEXP1CM_0		0x00000000
@@ -814,17 +822,6 @@
 #define SCCR_PCIEXP2CM_2		0x00080000
 #define SCCR_PCIEXP2CM_3		0x000c0000
 
-/* All of the four SATA controllers must have the same clock ratio */
-#define SCCR_SATA1CM			0x000000c0
-#define SCCR_SATA1CM_SHIFT		6
-#define SCCR_SATACM			0x000000ff
-#define SCCR_SATACM_SHIFT		0
-#define SCCR_SATACM_0			0x00000000
-#define SCCR_SATACM_1			0x00000055
-#define SCCR_SATACM_2			0x000000aa
-#define SCCR_SATACM_3			0x000000ff
-#endif
-
 /* CSn_BDNS - Chip Select memory Bounds Register
  */
 #define CSBNDS_SA			0x00FF0000
@@ -1170,9 +1167,52 @@
 #define DDRCDR_M_ODR		0x00000002
 #define DDRCDR_Q_DRN		0x00000001
 
+/* PCIE Bridge Register
+*/
+#define PEX_CSB_CTRL_OBPIOE	0x00000001
+#define PEX_CSB_CTRL_IBPIOE	0x00000002
+#define PEX_CSB_CTRL_WDMAE	0x00000004
+#define PEX_CSB_CTRL_RDMAE	0x00000008
+
+#define PEX_CSB_OBCTRL_PIOE	0x00000001
+#define PEX_CSB_OBCTRL_MEMWE	0x00000002
+#define PEX_CSB_OBCTRL_IOWE	0x00000004
+#define PEX_CSB_OBCTRL_CFGWE	0x00000008
+
+#define PEX_CSB_IBCTRL_PIOE	0x00000001
+
+#define PEX_OWAR_EN		0x00000001
+#define PEX_OWAR_TYPE_CFG	0x00000000
+#define PEX_OWAR_TYPE_IO	0x00000002
+#define PEX_OWAR_TYPE_MEM	0x00000004
+#define PEX_OWAR_RLXO		0x00000008
+#define PEX_OWAR_NANP		0x00000010
+#define PEX_OWAR_SIZE		0xFFFFF000
+
+#define PEX_IWAR_EN		0x00000001
+#define PEX_IWAR_TYPE_INT	0x00000000
+#define PEX_IWAR_TYPE_PF	0x00000004
+#define PEX_IWAR_TYPE_NO_PF	0x00000006
+#define PEX_IWAR_NSOV		0x00000008
+#define PEX_IWAR_NSNP		0x00000010
+#define PEX_IWAR_SIZE		0xFFFFF000
+#define PEX_IWAR_SIZE_1M	0x000FF000
+#define PEX_IWAR_SIZE_2M	0x001FF000
+#define PEX_IWAR_SIZE_4M	0x003FF000
+#define PEX_IWAR_SIZE_8M	0x007FF000
+#define PEX_IWAR_SIZE_16M	0x00FFF000
+#define PEX_IWAR_SIZE_32M	0x01FFF000
+#define PEX_IWAR_SIZE_64M	0x03FFF000
+#define PEX_IWAR_SIZE_128M	0x07FFF000
+#define PEX_IWAR_SIZE_256M	0x0FFFF000
+
+#define PEX_GCLK_RATIO		0x440
+
 #ifndef __ASSEMBLY__
 struct pci_region;
 void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot);
+void mpc83xx_pcislave_unlock(int bus);
+void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot);
 #endif
 
 #endif	/* __MPC83XX_H__ */
diff --git a/include/pci.h b/include/pci.h
index eebe8a8a54..072273be57 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -382,6 +382,8 @@ extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev
 
 #define MAX_PCI_REGIONS		7
 
+#define INDIRECT_TYPE_NO_PCIE_LINK	1
+
 /*
  * Structure of a PCI controller (host bridge)
  */
@@ -394,6 +396,8 @@ struct pci_controller {
 	volatile unsigned int *cfg_addr;
 	volatile unsigned char *cfg_data;
 
+	int indirect_type;
+
 	struct pci_region regions[MAX_PCI_REGIONS];
 	int region_count;