MX31: Add NAND SPL for i.MX31.

This patch adds the NAND SPL framework needed to boot i.MX31 boards
from NAND.

It has been tested on a i.MX31 PDK board with large page NAND. Small
page NANDs should work as well, but this has not been tested.

Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
whether this is compatible with a particular setup depends on how
the NAND device is programmed by the flash programmer (e.g. JTAG
debugger).

The patch is based on the work by Maxim Artamonov.

Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

1 files changed, 109 insertions, 0 deletions

diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
new file mode 100644
index 0000000000..da5be379d1
--- /dev/null
+++ b/include/fsl_nfc.h
@@ -0,0 +1,109 @@
+/*
+ *
+ * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_NFC_H
+#define __FSL_NFC_H
+
+/*
+ * Register map and bit definitions for the Freescale NAND Flash
+ * Controller present in i.MX31 and other devices.
+ */
+
+struct fsl_nfc_regs {
+	u32 main_area0[128]; /* @0x000 */
+	u32 main_area1[128];
+	u32 main_area2[128];
+	u32 main_area3[128];
+	u32 spare_area0[4];
+	u32 spare_area1[4];
+	u32 spare_area2[4];
+	u32 spare_area3[4];
+	u32 reserved1[64 - 16 + 64 * 5];
+	u16 bufsiz; /* @ 0xe00 */
+	u16 reserved2;
+	u16 buffer_address;
+	u16 flash_add;
+	u16 flash_cmd;
+	u16 configuration;
+	u16 ecc_status_result;
+	u16 ecc_rslt_main_area;
+	u16 ecc_rslt_spare_area;
+	u16 nf_wr_prot;
+	u16 unlock_start_blk_add;
+	u16 unlock_end_blk_add;
+	u16 nand_flash_wr_pr_st;
+	u16 nand_flash_config1;
+	u16 nand_flash_config2;
+};
+
+/*
+ * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
+ * operation
+ */
+#define NFC_CMD		0x1
+
+/*
+ * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
+ * operation
+ */
+#define NFC_ADDR	0x2
+
+/*
+ * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
+ * operation
+ */
+#define NFC_INPUT	0x4
+
+/*
+ * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
+ * Output operation
+ */
+#define NFC_OUTPUT	0x8
+
+/*
+ * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
+ * operation
+ */
+#define NFC_ID		0x10
+
+/*
+ * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
+ * Status operation
+ */
+#define NFC_STATUS	0x20
+
+/*
+ * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
+ * operation
+ */
+#define NFC_INT		0x8000
+
+#define NFC_SP_EN	(1 << 2)
+#define NFC_ECC_EN	(1 << 3)
+#define NFC_INT_MSK	(1 << 4)
+#define NFC_BIG		(1 << 5)
+#define NFC_RST		(1 << 6)
+#define NFC_CE		(1 << 7)
+#define NFC_ONE_CYCLE	(1 << 8)
+
+#endif /* __FSL_NFC_H */