diff options
| author | Stefan Roese <sr@denx.de> | 2010-09-20 16:05:31 +0200 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2010-09-23 09:02:05 +0200 |
| commit | 550650ddd0fde00f245bc3da72d7272844198394 (patch) | |
| tree | 6a9ef8ac54cfaf5ff63a047b2c66d0e058e4cd9f /include/configs | |
| parent | afabb498b749b48ca3ee7e833fe1501e2d6993cb (diff) | |
| download | u-boot-midas-550650ddd0fde00f245bc3da72d7272844198394.tar.gz u-boot-midas-550650ddd0fde00f245bc3da72d7272844198394.tar.bz2 u-boot-midas-550650ddd0fde00f245bc3da72d7272844198394.zip | |
ppc4xx: Use common NS16550 driver for PPC4xx UART
This patch removes the PPC4xx UART driver. Instead the common NS16550
driver is used, since all PPC4xx SoC's use this peripheral device.
The file 4xx_uart.c now only implements the UART clock calculation
function which also sets the SoC internal UART divisors.
All PPC4xx board config headers are changed to use this common NS16550
driver now.
Tested on these boards:
acadia, canyonlands, katmai, kilauea, sequoia, zeus
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include/configs')
76 files changed, 340 insertions, 96 deletions
diff --git a/include/configs/APC405.h b/include/configs/APC405.h index bb0238f4f0..cb3f80bfa0 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -176,6 +176,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ /* The following table includes the supported baudrates */ diff --git a/include/configs/AR405.h b/include/configs/AR405.h index 45c64c2d2c..568ce15c7b 100644 --- a/include/configs/AR405.h +++ b/include/configs/AR405.h @@ -127,6 +127,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ /* The following table includes the supported baudrates */ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 98bd6f32e5..789f7501fd 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -124,9 +124,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h index 115a6f9886..ad075b80b8 100644 --- a/include/configs/CANBT.h +++ b/include/configs/CANBT.h @@ -100,6 +100,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ /* The following table includes the supported baudrates */ diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index da85442b1e..550c462b88 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -86,7 +86,11 @@ # error "* External frequency (SysClk) not defined! *" #endif -#define CONFIG_UART1_CONSOLE 1 /* Use second UART */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index ede99700f1..9c57acb00c 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -122,9 +122,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 922121173a..c6882fdda3 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -111,9 +111,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index 3e7020df89..da57b04bba 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -125,6 +125,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index d3000f6578..d682d3726f 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -134,6 +134,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index d3763441ef..1c521f2a3f 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -133,6 +133,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 07acab0c2b..c7b79311cc 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -135,6 +135,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/CPCIISER4.h b/include/configs/CPCIISER4.h index 5b50bcf331..f114290130 100644 --- a/include/configs/CPCIISER4.h +++ b/include/configs/CPCIISER4.h @@ -110,6 +110,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 1843200 /* use external serial clock */ /* The following table includes the supported baudrates */ diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 9ab30ecbaf..f6cd760811 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -47,6 +47,12 @@ #define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */ #define CONFIG_NET_MULTI +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + /* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to * keep possible initrd ramdisk decompression out. This is in k (1024 bytes) #define CONFIG_PRAM 16 diff --git a/include/configs/DP405.h b/include/configs/DP405.h index 0ee456bbd0..5311dfb006 100644 --- a/include/configs/DP405.h +++ b/include/configs/DP405.h @@ -97,9 +97,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 8f1fc78bce..0907c3ab06 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -109,6 +109,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external serial clock */ /* The following table includes the supported baudrates */ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 830466f7a8..9c3499406f 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -64,9 +64,6 @@ #define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH #define CONFIG_SYS_PCI_SUBSYS_ID 0x0444 /* device ID for DU440 */ -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -86,10 +83,14 @@ /* * Serial Port */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI 1 -#undef CONFIG_UART1_CONSOLE #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index e07f9a1dc5..da3b4ae22a 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -139,6 +139,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 14318180 /* The following table includes the supported baudrates */ diff --git a/include/configs/G2000.h b/include/configs/G2000.h index 4d29f21553..e2e6cb29ce 100644 --- a/include/configs/G2000.h +++ b/include/configs/G2000.h @@ -151,9 +151,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index d940a886d2..0db9298611 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -176,9 +176,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 72e907b66d..5dea96ef5b 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -118,9 +118,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/JSE.h b/include/configs/JSE.h index 98f5661a09..c692b5458d 100644 --- a/include/configs/JSE.h +++ b/include/configs/JSE.h @@ -95,9 +95,13 @@ #define CONFIG_ENV_OFFSET 0x00 #define CONFIG_ENV_SIZE 512 - /* The JSE connects UART1 to the console tap connector. */ -#define CONFIG_UART1_CONSOLE 1 +#define CONFIG_CONS_INDEX 2 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + /* Set console baudrate to 9600 */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h index 49a7378f27..f936ae57de 100644 --- a/include/configs/KAREF.h +++ b/include/configs/KAREF.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ #define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -91,6 +90,11 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h index e7429dd199..7f2542c1f3 100644 --- a/include/configs/METROBOX.h +++ b/include/configs/METROBOX.h @@ -125,7 +125,6 @@ #define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ #define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -153,6 +152,11 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SERIAL_MULTI 1 #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index 7e6484ee94..e833e6d193 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -176,6 +176,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 916667 diff --git a/include/configs/OCRTC.h b/include/configs/OCRTC.h index 55471af34a..ad2e4da389 100644 --- a/include/configs/OCRTC.h +++ b/include/configs/OCRTC.h @@ -105,6 +105,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/ORSG.h b/include/configs/ORSG.h index 142471362f..3d35362ffd 100644 --- a/include/configs/ORSG.h +++ b/include/configs/ORSG.h @@ -105,6 +105,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h index 0d443ea2d4..244d6fe502 100644 --- a/include/configs/PCI405.h +++ b/include/configs/PCI405.h @@ -110,6 +110,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 3e57c0b92f..2901cfd6d6 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -167,6 +167,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index a3087829de..928ed8e15b 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -135,9 +135,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 00a12fb833..c420efe812 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -130,6 +130,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */ #define CONFIG_SYS_BASE_BAUD 806400 diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h index 2c048dd0dd..5b1048efb4 100644 --- a/include/configs/PMC405DE.h +++ b/include/configs/PMC405DE.h @@ -107,9 +107,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x3000000 /* 1 ... 48 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index 3c19f52d9c..fd2e9a9f96 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -72,9 +72,6 @@ #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 #define CONFIG_SYS_PCI_MEMSIZE 0x80000000 /* 2GB! */ -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -95,10 +92,14 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_BAUDRATE 115200 -#define CONFIG_SERIAL_MULTI 1 -#undef CONFIG_UART1_CONSOLE /* console on front panel */ +#define CONFIG_SERIAL_MULTI 1 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index e9cae85f5c..f9b20143a0 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -191,6 +191,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 21bb5b6d4b..b9ea6104e9 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -133,9 +133,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/VOM405.h b/include/configs/VOM405.h index 747d6a08d6..a88b41a969 100644 --- a/include/configs/VOM405.h +++ b/include/configs/VOM405.h @@ -120,9 +120,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#undef CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index f06bfe5521..0fbe80ce8c 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -125,6 +125,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 384000 diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index be8c9f82ef..f12fa55d2a 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -133,6 +133,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 384000 diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index 7756d3aad0..34a5fff138 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -122,9 +122,14 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h index cf39aeaaf7..f76ede3ce6 100644 --- a/include/configs/XPEDITE1000.h +++ b/include/configs/XPEDITE1000.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ #define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) @@ -112,6 +111,12 @@ extern void out32(unsigned int, unsigned long); /* * Serial Port */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index bd3388f626..b6f909c110 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -89,6 +89,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/alpr.h b/include/configs/alpr.h index ee0c14d960..75106b4278 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_MONITOR_BASE 0xfffc0000 /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CONFIG_SYS_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 @@ -75,9 +74,14 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_BAUDRATE 115200 -#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 23a859fcb4..9c53d3785c 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -31,8 +31,12 @@ /* * UART */ -#define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() +#define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 8c4127da08..18276c5886 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -62,8 +62,7 @@ #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 /*Don't change either of these*/ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ -#define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ +#define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ /*Don't change either of these*/ #define CONFIG_SYS_USB_DEVICE 0x50000000 @@ -85,9 +84,8 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE /*----------------------------------------------------------------------- * NVRAM/RTC diff --git a/include/configs/bubinga.h b/include/configs/bubinga.h index 05c4766b57..336e69ea93 100644 --- a/include/configs/bubinga.h +++ b/include/configs/bubinga.h @@ -123,6 +123,7 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index e2c58a51ab..51087f7371 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -114,8 +114,6 @@ #define CONFIG_SYS_SRAM_SIZE (256 << 10) #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals */ - #define CONFIG_SYS_AHB_BASE 0xE2000000 /* internal AHB peripherals */ /*----------------------------------------------------------------------- @@ -130,7 +128,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/csb272.h b/include/configs/csb272.h index 9ded330664..71082109ee 100644 --- a/include/configs/csb272.h +++ b/include/configs/csb272.h @@ -160,6 +160,12 @@ * UART configuration * */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #define CONFIG_SYS_EXT_SERIAL_CLOCK 3868400 /* use external serial clock */ #undef CONFIG_SYS_BASE_BAUD #define CONFIG_BAUDRATE 38400 /* Default baud rate */ diff --git a/include/configs/csb472.h b/include/configs/csb472.h index 71eb083e33..7b9f29ac32 100644 --- a/include/configs/csb472.h +++ b/include/configs/csb472.h @@ -159,6 +159,12 @@ * UART configuration * */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* use internal serial clock */ #define CONFIG_SYS_BASE_BAUD 691200 #define CONFIG_BAUDRATE 38400 /* Default baud rate */ diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 4533799971..5916db6e99 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -97,6 +97,7 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ diff --git a/include/configs/ebony.h b/include/configs/ebony.h index 10f425dd1e..09357d9086 100644 --- a/include/configs/ebony.h +++ b/include/configs/ebony.h @@ -61,7 +61,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -81,6 +80,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index d193919dc5..d6db7bf494 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 /*Don't change either of these*/ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripheral*/ #define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs */ /*Don't change either of these*/ @@ -80,8 +79,12 @@ /* * Serial Port */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -#define CONFIG_UART1_CONSOLE /* * Environment diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h index 26d2d0c9d3..6694f53378 100644 --- a/include/configs/hcu5.h +++ b/include/configs/hcu5.h @@ -70,9 +70,6 @@ #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -94,7 +91,6 @@ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_BAUDRATE 115200 #undef CONFIG_SERIAL_SOFTWARE_FIFO -#undef CONFIG_UART1_CONSOLE /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/icon.h b/include/configs/icon.h index 7a4e60cbc0..779af25fae 100644 --- a/include/configs/icon.h +++ b/include/configs/icon.h @@ -52,7 +52,6 @@ * actual resources get mapped (not physical addresses) */ #define CONFIG_SYS_FLASH_BASE 0xfc000000 /* later mapped to this addr */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ @@ -106,7 +105,7 @@ /* * Serial Port */ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* diff --git a/include/configs/intip.h b/include/configs/intip.h index 0c0bb373bd..82c828284a 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -96,8 +96,6 @@ #define CONFIG_SYS_SRAM_SIZE (256 << 10) #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */ - #define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */ /* @@ -113,7 +111,7 @@ /* * Serial Port */ -#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ /* * Environment diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 2a7ab8de0e..884dd74a17 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -61,7 +61,6 @@ * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ @@ -105,7 +104,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /*----------------------------------------------------------------------- diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 48dc9463a8..937d7c5e24 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -57,7 +57,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFC000000 #define CONFIG_SYS_NAND_ADDR 0xF8000000 #define CONFIG_SYS_FPGA_BASE 0xF0000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/ /*----------------------------------------------------------------------- * Initial RAM & Stack Pointer Configuration Options @@ -115,8 +114,7 @@ * Serial Port *----------------------------------------------------------------------*/ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/korat.h b/include/configs/korat.h index f95df684ea..0107a7b943 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -71,9 +71,6 @@ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE + 0x20000000) -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -93,11 +90,14 @@ /* * Serial Port */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI 1 -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/luan.h b/include/configs/luan.h index ccd9397df4..6b1a41f8e0 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -58,8 +58,6 @@ #define CONFIG_SYS_ISRAM_BASE 0xf8000000 /* internal 8k SRAM (L2 cache) */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xf0000000 /* internal peripherals */ - #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ #define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ @@ -88,8 +86,8 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* external 11.059MHz clk */ -#undef CONFIG_UART1_CONSOLE /* define if you want console on UART1 */ /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 6461124e56..9df6fc77f7 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -62,9 +62,6 @@ #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -106,11 +103,14 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clock provided */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI 1 -/* define this if you want console on UART1 */ -#define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */ #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/makalu.h b/include/configs/makalu.h index 52339f9c63..83a2d4a65a 100644 --- a/include/configs/makalu.h +++ b/include/configs/makalu.h @@ -55,7 +55,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xFC000000 #define CONFIG_SYS_FPGA_BASE 0xF0000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal peripherals*/ /*----------------------------------------------------------------------- * Initial RAM & Stack Pointer Configuration Options @@ -112,9 +111,8 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no ext. clk */ -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/neo.h b/include/configs/neo.h index f275c7b2a3..fde814b1e5 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -98,6 +98,12 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ diff --git a/include/configs/netstal-common.h b/include/configs/netstal-common.h index cb7efe7abc..8f42b6c62c 100644 --- a/include/configs/netstal-common.h +++ b/include/configs/netstal-common.h @@ -34,7 +34,12 @@ /* * UART */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 2e809b0f33..b388a406fd 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -58,7 +58,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -81,6 +80,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index d6b92070a9..6edf91ecc6 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -49,7 +49,6 @@ #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH */ #define CONFIG_SYS_MONITOR_BASE 0xfffc0000 /* start of monitor */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -80,6 +79,12 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 1f744b875d..85152d12a3 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -60,7 +60,6 @@ #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 /*Don't change either of these*/ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ #define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ /*Don't change either of these*/ @@ -80,11 +79,14 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external clk used */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI 1 -/*define this if you want console on UART1*/ -#undef CONFIG_UART1_CONSOLE #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index b7781873b6..0764cc85e3 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -105,6 +105,11 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #define CONFIG_SYS_BASE_BAUD 691200 #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 4b744a7949..913db9480a 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -47,7 +47,6 @@ * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -77,6 +76,11 @@ #define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */ #define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ + /*----------------------------------------------------------------------- * Initial RAM & stack pointer (placed in internal SRAM) *----------------------------------------------------------------------*/ diff --git a/include/configs/sbc405.h b/include/configs/sbc405.h index 429b11c196..187002c107 100644 --- a/include/configs/sbc405.h +++ b/include/configs/sbc405.h @@ -147,6 +147,12 @@ #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ #define CONFIG_SYS_BASE_BAUD 691200 diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 19084cec43..094d38b270 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -76,6 +76,11 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #define CONFIG_SERIAL_MULTI #undef CONFIG_SERIAL_SOFTWARE_FIFO /* diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 568d9fc0cd..900d1dbdcb 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -84,9 +84,6 @@ #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 -/* Don't change either of these */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ - #define CONFIG_SYS_USB2D0_BASE 0xe0000100 #define CONFIG_SYS_USB_DEVICE 0xe0000000 #define CONFIG_SYS_USB_HOST 0xe0000400 @@ -105,9 +102,8 @@ /* * Serial Port */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -/* define this if you want console on UART1 */ -#undef CONFIG_UART1_CONSOLE /* * Environment diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 41ee15b229..39ca7930ba 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -89,8 +89,6 @@ #define CONFIG_SYS_SRAM_SIZE (256 << 10) #define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000 -#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */ - /* * Initial RAM & stack pointer (placed in OCM) */ @@ -104,7 +102,7 @@ /* * Serial Port */ -#undef CONFIG_UART1_CONSOLE /* define this if you want console on UART1 */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ /* * Environment diff --git a/include/configs/taihu.h b/include/configs/taihu.h index 836081d0d5..a9954e4573 100644 --- a/include/configs/taihu.h +++ b/include/configs/taihu.h @@ -127,11 +127,11 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CONFIG_SYS_BASE_BAUD 691200 -#define CONFIG_UART1_CONSOLE 1 /*----------------------------------------------------------------------- * I2C stuff diff --git a/include/configs/taishan.h b/include/configs/taishan.h index 6423fd7f48..ce4a612256 100644 --- a/include/configs/taishan.h +++ b/include/configs/taishan.h @@ -50,7 +50,6 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ #define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ @@ -77,7 +76,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#define CONFIG_UART1_CONSOLE 1 /* use of UART1 as console */ +#define CONFIG_CONS_INDEX 2 /* Use UART1 */ #define CONFIG_SYS_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ /*----------------------------------------------------------------------- diff --git a/include/configs/walnut.h b/include/configs/walnut.h index 630c0d3a3c..191c28fc3a 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -84,6 +84,7 @@ * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, * set Linux BASE_BAUD to 403200. */ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ #undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index b66ab58d86..ed0560ad97 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -62,7 +62,6 @@ #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 /*Don't change either of these*/ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ #define CONFIG_SYS_PCI_BASE 0xe0000000 /* internal PCI regs*/ /*Don't change either of these*/ @@ -84,9 +83,8 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */ -/*define this if you want console on UART1*/ -#undef CONFIG_UART1_CONSOLE /*----------------------------------------------------------------------- * Environment diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 0b4dfb8e73..dfba50859a 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -60,7 +60,6 @@ * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ #define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ #define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ @@ -106,7 +105,7 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ -#undef CONFIG_UART1_CONSOLE +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ #undef CONFIG_SERIAL_SOFTWARE_FIFO #undef CONFIG_SYS_EXT_SERIAL_CLOCK diff --git a/include/configs/zeus.h b/include/configs/zeus.h index 1ae990ff40..6fbf38a329 100644 --- a/include/configs/zeus.h +++ b/include/configs/zeus.h @@ -122,14 +122,18 @@ /*----------------------------------------------------------------------- * Serial Port *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_serial_clock() #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ -#define CONFIG_SYS_BASE_BAUD 691200 +#define CONFIG_SYS_BASE_BAUD 691200 #define CONFIG_BAUDRATE 115200 #define CONFIG_SERIAL_MULTI -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /*----------------------------------------------------------------------- * Miscellaneous configurable options |