* Patch by Yuli Barcohen, 09 Jun 2004:

  Add support for Analogue&Micro Adder87x and the older AdderII board.

* Patch by Ming-Len Wu, 09 Jun 2004:
  Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board

1 files changed, 185 insertions, 0 deletions

diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
new file mode 100644
index 0000000000..9d4ab2b52e
--- /dev/null
+++ b/include/configs/mx1ads.h
@@ -0,0 +1,185 @@
+/*
+ * include/configs/mx1ads.h
+ * 
+ * (c) Copyright 2004
+ * Techware Information Technology, Inc.
+ * http://www.techware.com.tw/
+ *
+ * Ming-Len Wu <minglen_wu@techware.com.tw>
+ *
+ * This is the Configuration setting for Motorola MX1ADS board
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL		/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T		1	/* This is an ARM920T Core		*/
+#define	CONFIG_MC9328		1	/* It's a Motorola MC9328 SoC 		*/
+#define CONFIG_MX1ADS		1	/* on a Motorola MX1ADS Board  		*/
+
+#define BOARD_LATE_INIT		1 
+
+
+#define USE_920T_MMU		1
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff 		*/
+
+#if 0 
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#define CFG_MX1_GPCR		0x000003AB	/* for MX1ADS 0L44N		*/
+#endif 
+
+/*
+ * Size of malloc() pool
+ */
+
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ *  CS8900 Ethernet drivers
+ */
+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
+#define CS8900_BASE		0x15000300
+#define CS8900_BUS16		1 	/* the Linux driver does accesses as shorts */
+
+/*
+ * select serial console configuration
+ */
+
+#define CONFIG_UART1 		1 
+/* #define CONFIG_UART2		1	*/
+
+#define CONFIG_BAUDRATE		115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+
+#define CONFIG_COMMANDS \
+			(CONFIG_CMD_DFL	 | \
+			CFG_CMD_CACHE	 | \
+			/*CFG_CMD_NAND	 |*/ \
+			/*CFG_CMD_EEPROM |*/ \
+			/*CFG_CMD_I2C	 |*/ \
+			/*CFG_CMD_USB	 |*/ \
+			CFG_CMD_REGINFO  | \
+			CFG_CMD_ELF)  
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"root=/dev/docbp mem=48M" 
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5c
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.0.22
+#define CONFIG_SERVERIP		192.168.0.11
+#define CONFIG_BOOTFILE		"mx1ads"
+/*#define CONFIG_BOOTCOMMAND	"tftp; bootm" */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+						/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+ 
+#define CFG_HUSH_PARSER         1
+#define CFG_PROMPT_HUSH_PS2	"> "
+ 
+#define	CFG_LONGHELP				/* undef to save memory		*/
+
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT		"MX1ADS$ "	/* Monitor Command Prompt */
+#else
+#define CFG_PROMPT		"MX1ADS=> "	/* Monitor Command Prompt */
+#endif
+
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE 		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) 
+						/* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x09000000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0AF00000	/* 63 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ				/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x08800000	/* default load address	*/
+
+
+#define	CFG_HZ			1000
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+ 
+
+#define CONFIG_NR_DRAM_BANKS	1	   	/* we have 1 bank of SDRAM 	*/
+#define PHYS_SDRAM_1		0x08000000 	/* SDRAM  on CSD0 		*/
+#define PHYS_SDRAM_1_SIZE	0x04000000 	/* 64 MB 			*/
+
+#define CFG_MAX_FLASH_BANKS	1		/* 1 bank of SyncFlash 		*/
+#define CFG_FLASH_BASE		0x0C000000 	/* SyncFlash on CSD1 		*/
+#define FLASH_BANK_SIZE		0x01000000	/* 16 MB Total 		 	*/
+
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+
+#define CONFIG_SYNCFLASH	1
+#define PHYS_FLASH_SIZE		0x01000000
+#define CFG_MAX_FLASH_SECT	(16)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE+0x00ff0000)
+ 
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x0f000	/* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE	0x100000
+#endif	/* __CONFIG_H */