rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 33 insertions, 33 deletions

diff --git a/include/configs/actux4.h b/include/configs/actux4.h
index 83bd7f569a..3cf1b2058b 100644
--- a/include/configs/actux4.h
+++ b/include/configs/actux4.h
@@ -32,7 +32,7 @@
 #define CONFIG_DISPLAY_CPUINFO		1
 #define CONFIG_DISPLAY_BOARDINFO	1
 
-#define CFG_IXP425_CONSOLE		IXP425_UART1
+#define CONFIG_SYS_IXP425_CONSOLE		IXP425_UART1
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTDELAY		3
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -43,9 +43,9 @@
 #undef CONFIG_USE_IRQ
 
 /* Size of malloc() pool */
-#define CFG_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 128*1024)
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE		128
+#define CONFIG_SYS_GBL_DATA_SIZE		128
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
@@ -68,30 +68,30 @@
 #endif
 
 /* Miscellaneous configurable options */
-#define CFG_LONGHELP
-#define CFG_PROMPT			"=> "
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT			"=> "
 /* Console I/O Buffer Size */
-#define CFG_CBSIZE			256
+#define CONFIG_SYS_CBSIZE			256
 /* Print Buffer Size */
-#define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 /* max number of command args */
-#define CFG_MAXARGS			16
+#define CONFIG_SYS_MAXARGS			16
 /* Boot Argument Buffer Size */
-#define CFG_BARGSIZE			CFG_CBSIZE
+#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 
-#define CFG_MEMTEST_START		0x00400000
-#define CFG_MEMTEST_END			0x00800000
+#define CONFIG_SYS_MEMTEST_START		0x00400000
+#define CONFIG_SYS_MEMTEST_END			0x00800000
 
 /* everything, incl board info, in Hz */
-#undef  CFG_CLKS_IN_HZ
+#undef  CONFIG_SYS_CLKS_IN_HZ
 /* spec says 66.666 MHz, but it appears to be 33 */
-#define CFG_HZ				3333333
+#define CONFIG_SYS_HZ				3333333
 
 /* default load address */
-#define CFG_LOAD_ADDR			0x00010000
+#define CONFIG_SYS_LOAD_ADDR			0x00010000
 
 /* valid baudrates */
-#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
+#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, \
 					  115200, 230400 }
 #define CONFIG_SERIAL_RTS_ACTIVE	1
 
@@ -106,44 +106,44 @@
 #endif
 
 /* Expansion bus settings */
-#define CFG_EXP_CS0			0xbd113003
+#define CONFIG_SYS_EXP_CS0			0xbd113003
 
 /* SDRAM settings */
 #define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x00000000
-#define CFG_DRAM_BASE			0x00000000
+#define CONFIG_SYS_DRAM_BASE			0x00000000
 
 /* 32MB SDRAM */
-#define CFG_SDR_CONFIG			0x18
+#define CONFIG_SYS_SDR_CONFIG			0x18
 #define PHYS_SDRAM_1_SIZE		0x02000000
-#define CFG_SDRAM_REFRESH_CNT		0x81a
-#define CFG_SDR_MODE_CONFIG		0x1
-#define CFG_DRAM_SIZE			0x02000000
+#define CONFIG_SYS_SDRAM_REFRESH_CNT		0x81a
+#define CONFIG_SYS_SDR_MODE_CONFIG		0x1
+#define CONFIG_SYS_DRAM_SIZE			0x02000000
 
 /* FLASH organization */
-#define CFG_MAX_FLASH_BANKS		2
+#define CONFIG_SYS_MAX_FLASH_BANKS		2
 /* max # of sectors per chip */
-#define CFG_MAX_FLASH_SECT		70
+#define CONFIG_SYS_MAX_FLASH_SECT		70
 #define PHYS_FLASH_1			0x50000000
 #define PHYS_FLASH_2			0x51000000
-#define CFG_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
+#define CONFIG_SYS_FLASH_BANKS_LIST		{ PHYS_FLASH_1, PHYS_FLASH_2 }
 
-#define CFG_FLASH_BASE			PHYS_FLASH_1
-#define CFG_MONITOR_BASE		PHYS_FLASH_1
-#define CFG_MONITOR_LEN			(252 << 10)
+#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_MONITOR_LEN			(252 << 10)
 
 /* Use common CFI driver */
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
 /* board provides its own flash_init code */
 #define CONFIG_FLASH_CFI_LEGACY		1
 /* no byte writes on IXP4xx */
-#define CFG_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_CFI_WIDTH		FLASH_CFI_16BIT
 /* SST 39VF020 etc. support */
-#define CFG_FLASH_LEGACY_256Kx8	1
+#define CONFIG_SYS_FLASH_LEGACY_256Kx8	1
 
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Ethernet */
 
@@ -158,7 +158,7 @@
 /* MII PHY management */
 #define CONFIG_MII			1
 /* Number of ethernet rx buffers & descriptors */
-#define CFG_RX_ETH_BUFFER		16
+#define CONFIG_SYS_RX_ETH_BUFFER		16
 
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NET
@@ -173,7 +173,7 @@
 #define CONFIG_BOOTP_HOSTNAME
 
 /* Cache Configuration */
-#define CFG_CACHELINE_SIZE		32
+#define CONFIG_SYS_CACHELINE_SIZE		32
 
 /* environment organization: one complete 4k flash sector */
 #define	CONFIG_ENV_IS_IN_FLASH		1