diff options
| author | wdenk <wdenk> | 2003-09-10 22:30:53 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-09-10 22:30:53 +0000 |
| commit | 7205e4075d8b50e4dd89fe39ed03860b23cbb704 (patch) | |
| tree | 0dfa865e7087ff4ee07967a2531c91ff5645a802 /include/configs/SXNI855T.h | |
| parent | 149dded2b178bc0fb62cb6f61b87968d914b580a (diff) | |
| download | u-boot-midas-7205e4075d8b50e4dd89fe39ed03860b23cbb704.tar.gz u-boot-midas-7205e4075d8b50e4dd89fe39ed03860b23cbb704.tar.bz2 u-boot-midas-7205e4075d8b50e4dd89fe39ed03860b23cbb704.zip | |
* Patches by Denis Peter, 9 Sep 2003:
add FAT support for IDE, SCSI and USB
* Patches by Gleb Natapov, 2 Sep 2003:
- cleanup of POST code for unsupported architectures
- MPC824x locks way0 of data cache for use as initial RAM;
this patch unlocks it after relocation to RAM and invalidates
the locked entries.
* Patch by Gleb Natapov, 30 Aug 2003:
new I2C driver for mpc107 bridge. Now works from flash.
* Patch by Dave Ellis, 11 Aug 2003:
- JFFS2: fix typo in common/cmd_jffs2.c
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
- JFFS2: remove node version 0 warning
- JFFS2: accept JFFS2 PADDING nodes
- SXNI855T: add AM29LV800 support
- SXNI855T: move environment from EEPROM to flash
- SXNI855T: boot from JFFS2 in NOR or NAND flash
* Patch by Bill Hargen, 11 Aug 2003:
fixes for I2C on MPC8240
- fix i2c_write routine
- fix iprobe command
- eliminates use of global variables, plus dead code, cleanup.
Diffstat (limited to 'include/configs/SXNI855T.h')
| -rw-r--r-- | include/configs/SXNI855T.h | 29 |
1 files changed, 22 insertions, 7 deletions
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index bdaf683c36..d6fa798075 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -145,12 +145,22 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_EEPROM | \ + CFG_CMD_JFFS2 | \ CFG_CMD_NAND | \ CFG_CMD_DATE) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_JFFS_CUSTOM_PART +#define CFG_JFFS2_SORT_FRAGMENTS +/* JFFS2 location when using NOR flash */ +#define CFG_JFFS2_BASE (CFG_FLASH_BASE + 0x80000) +#define CFG_JFFS2_SIZE (0x780000) +/* JFFS2 location (in RAM) when using NAND flash */ +#define CFG_JFFS2_RAMBASE 0x400000 +#define CFG_JFFS2_RAMSIZE 0x200000 /* NAND boot partition is 2MiB */ + /* NAND flash support */ #define CONFIG_MTD_NAND_ECC_JFFS2 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -405,13 +415,18 @@ #define CONFIG_RESET_ON_PANIC /* reset if system panic() */ -/* to put environment in EEROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 /* Start right at beginning of NVRAM */ -#define CFG_ENV_SIZE 1024 /* Use only a part of it*/ - -#if 1 -#define CONFIG_BOOT_RETRY_TIME 60 /* boot if no command in 60 seconds */ +#define CFG_ENV_IS_IN_FLASH +#ifdef CFG_ENV_IS_IN_FLASH + /* environment is in FLASH */ + #define CFG_ENV_ADDR 0xF8040000 /* AM29LV641 or AM29LV800BT */ + #define CFG_ENV_ADDR_REDUND 0xF8050000 /* AM29LV641 or AM29LV800BT */ + #define CFG_ENV_SECT_SIZE 0x00010000 + #define CFG_ENV_SIZE 0x00002000 +#else + /* environment is in EEPROM */ + #define CFG_ENV_IS_IN_EEPROM 1 + #define CFG_ENV_OFFSET 0 /* at beginning of EEPROM */ + #define CFG_ENV_SIZE 1024 /* Use only a part of it*/ #endif #if 1 |