diff options
| author | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-11-09 12:51:47 +0100 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2013-11-09 22:59:47 +0100 |
| commit | 85b8c5c4bf80025de4632ae6c9a8a606e51508a4 (patch) | |
| tree | 7a89b428296ab5baca8f07c4019e3485e452cf42 /drivers/usb | |
| parent | 15c5cdf5aa6b292145e5e3e220ec1f42b11eff6f (diff) | |
| parent | 3285d4ca197928a048d3dda86751b5d26e6e0e86 (diff) | |
| download | u-boot-midas-85b8c5c4bf80025de4632ae6c9a8a606e51508a4.tar.gz u-boot-midas-85b8c5c4bf80025de4632ae6c9a8a606e51508a4.tar.bz2 u-boot-midas-85b8c5c4bf80025de4632ae6c9a8a606e51508a4.zip | |
Merge branch 'iu-boot/master' into 'u-boot-arm/master'
Conflicts:
arch/arm/cpu/arm926ejs/mxs/Makefile
board/compulab/cm_t35/Makefile
board/corscience/tricorder/Makefile
board/ppcag/bg0900/Makefile
drivers/bootcount/Makefile
include/configs/omap4_common.h
include/configs/pdnb3.h
Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:
board/compulab/common/Makefile
board/udoo/Makefile
include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.
include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.
Note: 'git show' will also list two files just because
they are new:
include/configs/am335x_igep0033.h
include/configs/omap3_igep00x0.h
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/host/ohci-at91.c | 19 |
1 files changed, 10 insertions, 9 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 9e90d59087..c24505e78e 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -18,15 +18,15 @@ int usb_cpu_init(void) { at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \ - defined(CONFIG_AT91SAM9261) +#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB /* Enable PLLB */ writel(get_pllb_init(), &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3) +#ifdef CONFIG_AT91SAM9N12 + writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb); +#endif +#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) /* Enable UPLL */ writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); @@ -70,14 +70,15 @@ int usb_cpu_stop(void) writel(ATMEL_PMC_UHP, &pmc->scdr); #endif -#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \ - defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) +#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB +#ifdef CONFIG_AT91SAM9N12 + writel(0, &pmc->usb); +#endif /* Disable PLLB */ writel(0, &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3) +#elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) /* Disable UPLL */ writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) |