diff options
| author | michael <trimarchi@gandalf.sssup.it> | 2011-03-14 21:16:38 +0000 |
|---|---|---|
| committer | Scott Wood <scottwood@freescale.com> | 2011-04-01 14:49:08 -0500 |
| commit | 67a490d60d70f2b01d55976440ba30154af96965 (patch) | |
| tree | f81853db25b1830e3ccde5d2fbee8ea7ab8419e2 /drivers/mtd | |
| parent | 0272c718ba69c60a9d719db6806971d98db98090 (diff) | |
| download | u-boot-midas-67a490d60d70f2b01d55976440ba30154af96965.tar.gz u-boot-midas-67a490d60d70f2b01d55976440ba30154af96965.tar.bz2 u-boot-midas-67a490d60d70f2b01d55976440ba30154af96965.zip | |
atmel_nand: don't require CONFIG_SYS_NAND_ENABLE_PIN
If NCE is hooked up to NCS3, we don't need to (and can't)
explicitly set the state of the NCE pin. Instead, the
controller asserts it automatically as part of a
command/data access. Only "CE don't care"-type NAND chips
can be used in this manner.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Reinhard Meyer <u-boot@emk-elektronik.de>
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/nand/atmel_nand.c | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index ab8bbb3aea..818d3624a7 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -249,8 +249,10 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd, if (ctrl & NAND_ALE) IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE; +#ifdef CONFIG_SYS_NAND_ENABLE_PIN at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE)); +#endif this->IO_ADDR_W = (void *) IO_ADDR_W; } |