Merge branch 'master' into hpc2

Conflicts:

	drivers/cfi_flash.c

The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
mpc7448hpc2 board.

9 files changed, 155 insertions, 94 deletions

diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index b7e00b3e24..7e65821852 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -123,7 +123,7 @@ void cpu_init_f (void)
 #endif
 
 #if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE)
-	*(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS5_START);
+	*(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START);
 	*(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE);
 	addecr |= (1 << 27);
 #endif
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 37fe3e7153..71c1bfab1a 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -376,7 +376,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
 
 #if (DEBUG & 0x2)
 	if (fec->xcv_type != SEVENWIRE)
-		mpc5xxx_fec_phydump ();
+		mpc5xxx_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -575,7 +575,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev)
 
 #if (DEBUG & 0x2)
 	if (fec->xcv_type != SEVENWIRE)
-		mpc5xxx_fec_phydump ();
+		mpc5xxx_fec_phydump (dev->name);
 #endif
 
 	/*
@@ -882,7 +882,8 @@ int mpc5xxx_fec_initialize(bd_t * bis)
     defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0)	|| \
     defined(CONFIG_MCC200)  || defined(CONFIG_O2DNT)	|| \
     defined(CONFIG_PM520)   || defined(CONFIG_TOP5200)	|| \
-    defined(CONFIG_TQM5200) || defined(CONFIG_V38B)
+    defined(CONFIG_TQM5200) || defined(CONFIG_V38B)	|| \
+    defined(CONFIG_UC101)
 # ifndef CONFIG_FEC_10MBIT
 	fec->xcv_type = MII100;
 # else
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 8ae584f2e1..9d0fc6b4fa 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -227,8 +227,17 @@ static int smc_init (void)
 	sp->smc_smcm = 0;
 	sp->smc_smce = 0xff;
 
-#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */
-	*((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff;
+#ifdef CFG_SPC1920_SMC1_CLK4
+	/* clock source is PLD */
+
+	/* set freq to 19200 Baud */
+	*((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3;
+	/* configure clk4 as input */
+	im->im_ioport.iop_pdpar |= 0x800;
+	im->im_ioport.iop_pddir &= ~0x800;
+
+	cp->cp_simode = 0x0000;
+	cp->cp_simode |= 0x7000;
 #else
 	/* Set up the baud rate generator */
 	smc_setbrg ();
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 9b711e2ebf..7134355635 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 }
 
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405))
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3))
 
 /*
  *As is these functs get called out of flash Not a horrible
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 6130cd2839..d6c4be5f1a 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -26,10 +26,9 @@
 #include <common.h>
 #include <pci.h>
 
-#include "440spe_pcie.h"
+#if defined(CONFIG_440SPE) && defined(CONFIG_PCI)
 
-#if defined(CONFIG_440SPE)
-#if defined(CONFIG_PCI)
+#include "440spe_pcie.h"
 
 enum {
 	PTYPE_ENDPOINT		= 0x0,
@@ -958,5 +957,4 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
 
 	return 0;
 }
-#endif /* CONFIG_PCI */
-#endif /* CONFIG_440SPE */
+#endif /* CONFIG_440SPE && CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 427ea94626..4f5558328a 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -166,6 +166,11 @@ struct eth_device *emac0_dev = NULL;
 #define LAST_EMAC_NUM	1
 #endif
 
+/* normal boards start with EMAC0 */
+#if !defined(CONFIG_EMAC_NR_START)
+#define CONFIG_EMAC_NR_START	0
+#endif
+
 /*-----------------------------------------------------------------------------+
  * Prototypes and externals.
  *-----------------------------------------------------------------------------*/
@@ -601,6 +606,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			/* end Vitesse/Cicada errata */
 		}
 #endif
+
+#if defined(CONFIG_ET1011C_PHY)
+		/*
+		 * Agere ET1011c PHY needs to have an extended register whacked
+		 * for RGMII mode.
+		 */
+		if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) {
+			miiphy_read (dev->name, reg, 0x16, &reg_short);
+			reg_short &= ~(0x7);
+			reg_short |= 0x6;	/* RGMII DLL Delay*/
+			miiphy_write (dev->name, reg, 0x16, reg_short);
+
+			miiphy_read (dev->name, reg, 0x17, &reg_short);
+			reg_short &= ~(0x40);
+			miiphy_write (dev->name, reg, 0x17, reg_short);
+
+			miiphy_write(dev->name, reg, 0x1c, 0x74f0);
+		}
+#endif
+
 #endif
 		/* Start/Restart autonegotiation */
 		phy_setup_aneg (dev->name, reg);
@@ -643,8 +668,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 	if (hw_p->print_speed) {
 		hw_p->print_speed = 0;
-		printf ("ENET Speed is %d Mbps - %s duplex connection\n",
-			(int) speed, (duplex == HALF) ? "HALF" : "FULL");
+		printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n",
+			(int) speed, (duplex == HALF) ? "HALF" : "FULL",
+			hw_p->devnum);
 	}
 
 #if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
@@ -1493,6 +1519,8 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 	struct eth_device *dev;
 	int eth_num = 0;
 	EMAC_4XX_HW_PST hw = NULL;
+	u8 ethaddr[4 + CONFIG_EMAC_NR_START][6];
+	u32 hw_addr[4];
 
 #if defined(CONFIG_440GX)
 	unsigned long pfc1;
@@ -1502,59 +1530,69 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 	pfc1 |= 0x01200000;
 	mtsdr (sdr_pfc1, pfc1);
 #endif
-	/* set phy num and mode */
-	bis->bi_phynum[0] = CONFIG_PHY_ADDR;
-	bis->bi_phymode[0] = 0;
 
-#if defined(CONFIG_PHY1_ADDR)
-	bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
-	bis->bi_phymode[1] = 0;
-#endif
-#if defined(CONFIG_440GX)
-	bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
-	bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
-	bis->bi_phymode[2] = 2;
-	bis->bi_phymode[3] = 2;
-
-	ppc_4xx_eth_setup_bridge(0, bis);
-#endif
+	/* first clear all mac-addresses */
+	for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++)
+		memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6);
 
 	for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
-
-		/* See if we can actually bring up the interface, otherwise, skip it */
 		switch (eth_num) {
 		default:		/* fall through */
 		case 0:
-			if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) {
-				bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
-				continue;
-			}
+			memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+			       bis->bi_enetaddr, 6);
+			hw_addr[eth_num] = 0x0;
 			break;
 #ifdef CONFIG_HAS_ETH1
 		case 1:
-			if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) {
-				bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
-				continue;
-			}
+			memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+			       bis->bi_enet1addr, 6);
+			hw_addr[eth_num] = 0x100;
 			break;
 #endif
 #ifdef CONFIG_HAS_ETH2
 		case 2:
-			if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) {
-				bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
-				continue;
-			}
+			memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+			       bis->bi_enet2addr, 6);
+			hw_addr[eth_num] = 0x400;
 			break;
 #endif
 #ifdef CONFIG_HAS_ETH3
 		case 3:
-			if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) {
-				bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
-				continue;
-			}
+			memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
+			       bis->bi_enet3addr, 6);
+			hw_addr[eth_num] = 0x600;
 			break;
 #endif
 		}
+	}
+
+	/* set phy num and mode */
+	bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+	bis->bi_phymode[0] = 0;
+
+#if defined(CONFIG_PHY1_ADDR)
+	bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+	bis->bi_phymode[1] = 0;
+#endif
+#if defined(CONFIG_440GX)
+	bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
+	bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
+	bis->bi_phymode[2] = 2;
+	bis->bi_phymode[3] = 2;
+
+	ppc_4xx_eth_setup_bridge(0, bis);
+#endif
+
+	for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
+		/*
+		 * See if we can actually bring up the interface,
+		 * otherwise, skip it
+		 */
+		if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) {
+			bis->bi_phymode[eth_num] = BI_PHYMODE_NONE;
+			continue;
+		}
 
 		/* Allocate device structure */
 		dev = (struct eth_device *) malloc (sizeof (*dev));
@@ -1576,36 +1614,12 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 		}
 		memset(hw, 0, sizeof(*hw));
 
-		switch (eth_num) {
-		default:		/* fall through */
-		case 0:
-			hw->hw_addr = 0;
-			memcpy (dev->enetaddr, bis->bi_enetaddr, 6);
-			break;
-#ifdef CONFIG_HAS_ETH1
-		case 1:
-			hw->hw_addr = 0x100;
-			memcpy (dev->enetaddr, bis->bi_enet1addr, 6);
-			break;
-#endif
-#ifdef CONFIG_HAS_ETH2
-		case 2:
-			hw->hw_addr = 0x400;
-			memcpy (dev->enetaddr, bis->bi_enet2addr, 6);
-			break;
-#endif
-#ifdef CONFIG_HAS_ETH3
-		case 3:
-			hw->hw_addr = 0x600;
-			memcpy (dev->enetaddr, bis->bi_enet3addr, 6);
-			break;
-#endif
-		}
-
+		hw->hw_addr = hw_addr[eth_num];
+		memcpy (dev->enetaddr, ethaddr[eth_num], 6);
 		hw->devnum = eth_num;
 		hw->print_speed = 1;
 
-		sprintf (dev->name, "ppc_4xx_eth%d", eth_num);
+		sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START);
 		dev->priv = (void *) hw;
 		dev->init = ppc_4xx_eth_init;
 		dev->halt = ppc_4xx_eth_halt;
@@ -1663,7 +1677,6 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 	return (1);
 }
 
-
 #if !defined(CONFIG_NET_MULTI)
 void eth_halt (void) {
 	if (emac0_dev) {
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 9c5c9109b1..57a7e8d6e2 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -332,24 +332,44 @@ int checkcpu (void)
 		strcpy(addstr, "No Security/Kasumi support");
 		break;
 
-	case PVR_440SP_RA:
-		puts("SP Rev. A");
+	case PVR_440SP_6_RAB:
+		puts("SP Rev. A/B");
+		strcpy(addstr, "RAID 6 support");
 		break;
 
-	case PVR_440SP_RB:
-		puts("SP Rev. B");
+	case PVR_440SP_RAB:
+		puts("SP Rev. A/B");
+		strcpy(addstr, "No RAID 6 support");
+		break;
+
+	case PVR_440SP_6_RC:
+		puts("SP Rev. C");
+		strcpy(addstr, "RAID 6 support");
 		break;
 
 	case PVR_440SP_RC:
 		puts("SP Rev. C");
+		strcpy(addstr, "No RAID 6 support");
+		break;
+
+	case PVR_440SPe_6_RA:
+		puts("SPe Rev. A");
+		strcpy(addstr, "RAID 6 support");
 		break;
 
 	case PVR_440SPe_RA:
 		puts("SPe Rev. A");
+		strcpy(addstr, "No RAID 6 support");
+		break;
+
+	case PVR_440SPe_6_RB:
+		puts("SPe Rev. B");
+		strcpy(addstr, "RAID 6 support");
 		break;
 
 	case PVR_440SPe_RB:
 		puts("SPe Rev. B");
+		strcpy(addstr, "No RAID 6 support");
 		break;
 
 	default:
@@ -419,7 +439,7 @@ int ppc440spe_revB() {
 	unsigned int pvr;
 
 	pvr = get_pvr();
-	if (pvr == PVR_440SPe_RB)
+	if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
 		return 1;
 	else
 		return 0;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 4b746b072e..ae24591087 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -31,9 +31,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-
 #ifdef CFG_INIT_DCACHE_CS
 # if (CFG_INIT_DCACHE_CS == 0)
 #  define PBxAP pb0ap
@@ -222,6 +219,10 @@ void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_M
 void
 cpu_init_f (void)
 {
+#if defined(CONFIG_WATCHDOG)
+	unsigned long val;
+#endif
+
 #if defined(CONFIG_405EP)
 	/*
 	 * GPIO0 setup (select GPIO or alternate function)
@@ -312,9 +313,11 @@ cpu_init_f (void)
 	mtebc(pb7cr, CFG_EBC_PB7CR);
 #endif
 
-#if defined(CONFIG_WATCHDOG)
-	unsigned long val;
+#if defined (CFG_EBC_CFG)
+	mtebc(epcr, CFG_EBC_CFG);
+#endif
 
+#if defined(CONFIG_WATCHDOG)
 	val = mfspr(tcr);
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
 	val |= 0xb8000000;      /* generate system reset after 1.34 seconds */
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index f06038e998..d520cd3ff4 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005-2006
+ * (C) Copyright 2005-2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * (C) Copyright 2006
@@ -32,9 +32,9 @@
 #include <asm/processor.h>
 #include "sdram.h"
 
-
 #ifdef CONFIG_SDRAM_BANK0
 
+#ifndef CONFIG_440
 
 #ifndef CFG_SDRAM_TABLE
 sdram_conf_t mb0cf[] = {
@@ -50,9 +50,6 @@ sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
 
 #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
 
-
-#ifndef CONFIG_440
-
 #ifdef CFG_SDRAM_CASL
 static ulong ns2clks(ulong ns)
 {
@@ -221,6 +218,26 @@ void sdram_init(void)
 
 #else /* CONFIG_440 */
 
+/*
+ * Define some default values. Those can be overwritten in the
+ * board config file.
+ */
+
+#ifndef CFG_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+	{(256 << 20), 13, 0x000C4001},	/* 256MB mode 3, 13x10(4)	*/
+	{(64 << 20),  12, 0x00082001}	/* 64MB mode 2, 12x9(4)		*/
+};
+#else
+sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+#endif
+
+#ifndef CFG_SDRAM0_TR0
+#define	CFG_SDRAM0_TR0		0x41094012
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
 #define NUM_TRIES 64
 #define NUM_READS 10
 
@@ -295,7 +312,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
 	*tr1_value = (first_good + last_bad) / 2;
 }
 
-
 #ifdef CONFIG_SDRAM_ECC
 static void ecc_init(ulong start, ulong size)
 {
@@ -351,7 +367,8 @@ long int initdram(int board_type)
 	int i;
 	int tr1_bank1;
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+    defined(CONFIG_440GR) || defined(CONFIG_440SP)
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
@@ -378,9 +395,9 @@ long int initdram(int board_type)
 		 * Following for CAS Latency = 2.5 @ 133 MHz PLB
 		 */
 		mtsdram(mem_b0cr, mb0cf[i].reg);
-		mtsdram(mem_tr0, 0x41094012);
+		mtsdram(mem_tr0, CFG_SDRAM0_TR0);
 		mtsdram(mem_tr1, 0x80800800);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
-		mtsdram(mem_rtr, 0x7e000000);	/* Interval 15.20µs @ 133MHz PLB*/
+		mtsdram(mem_rtr, 0x04100000);	/* Interval 7.8µs @ 133MHz PLB	*/
 		mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM*/
 		udelay(400);			/* Delay 200 usecs (min)	*/