arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

9 files changed, 0 insertions, 1895 deletions

diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
deleted file mode 100644
index 07a151a170..0000000000
--- a/cpu/pxa/Makefile
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-START	= start.o
-
-COBJS	+= cpu.o
-COBJS	+= i2c.o
-COBJS	+= pxafb.o
-COBJS	+= timer.o
-COBJS	+= usb.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/pxa/config.mk b/cpu/pxa/config.mk
deleted file mode 100644
index a05d69ca27..0000000000
--- a/cpu/pxa/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv5te -mtune=xscale
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# ========================================================================
-PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
deleted file mode 100644
index 800d120e71..0000000000
--- a/cpu/pxa/cpu.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * just disable everything that can disturb booting linux
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I-cache */
-	icache_disable();
-	dcache_disable();
-
-	/* flush I-cache */
-	cache_flush();
-
-	return (0);
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-}
-
-#ifndef CONFIG_CPU_MONAHANS
-void set_GPIO_mode(int gpio_mode)
-{
-	int gpio = gpio_mode & GPIO_MD_MASK_NR;
-	int fn = (gpio_mode & GPIO_MD_MASK_FN) >> 8;
-	int gafr;
-
-	if (gpio_mode & GPIO_MD_MASK_DIR)
-	{
-		GPDR(gpio) |= GPIO_bit(gpio);
-	}
-	else
-	{
-		GPDR(gpio) &= ~GPIO_bit(gpio);
-	}
-	gafr = GAFR(gpio) & ~(0x3 << (((gpio) & 0xf)*2));
-	GAFR(gpio) = gafr |  (fn  << (((gpio) & 0xf)*2));
-}
-#endif /* CONFIG_CPU_MONAHANS */
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
deleted file mode 100644
index 6b72ba13a0..0000000000
--- a/cpu/pxa/i2c.c
+++ /dev/null
@@ -1,458 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2003 Pengutronix e.K.
- * Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Back ported to the 8xx platform (from the 8260 platform) by
- * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
- */
-
-/* FIXME: this file is PXA255 specific! What about other XScales? */
-
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-/*
- *	- CONFIG_SYS_I2C_SPEED
- *	- I2C_PXA_SLAVE_ADDR
- */
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <i2c.h>
-
-/*#define	DEBUG_I2C	1	/###* activate local debugging output  */
-#define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
-
-#if (CONFIG_SYS_I2C_SPEED == 400000)
-#define I2C_ICR_INIT	(ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-#else
-#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
-#endif
-
-#define I2C_ISR_INIT		0x7FF
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-
-/* Shall the current transfer have a start/stop condition? */
-#define I2C_COND_NORMAL		0
-#define I2C_COND_START		1
-#define I2C_COND_STOP		2
-
-/* Shall the current transfer be ack/nacked or being waited for it? */
-#define I2C_ACKNAK_WAITACK	1
-#define I2C_ACKNAK_SENDACK	2
-#define I2C_ACKNAK_SENDNAK	4
-
-/* Specify who shall transfer the data (master or slave) */
-#define I2C_READ		0
-#define I2C_WRITE		1
-
-/* All transfers are described by this data structure */
-struct i2c_msg {
-	u8 condition;
-	u8 acknack;
-	u8 direction;
-	u8 data;
-};
-
-
-/**
- * i2c_pxa_reset: - reset the host controller
- *
- */
-
-static void i2c_reset( void )
-{
-	ICR &= ~ICR_IUE;		/* disable unit */
-	ICR |= ICR_UR;			/* reset the unit */
-	udelay(100);
-	ICR &= ~ICR_IUE;		/* disable unit */
-#ifdef CONFIG_CPU_MONAHANS
-	CKENB |= (CKENB_4_I2C); /*  | CKENB_1_PWM1 | CKENB_0_PWM0); */
-#else /* CONFIG_CPU_MONAHANS */
-	CKEN |= CKEN14_I2C;		/* set the global I2C clock on */
-#endif
-	ISAR = I2C_PXA_SLAVE_ADDR;	/* set our slave address */
-	ICR = I2C_ICR_INIT;		/* set control register values */
-	ISR = I2C_ISR_INIT;		/* set clear interrupt bits */
-	ICR |= ICR_IUE;			/* enable unit */
-	udelay(100);
-}
-
-
-/**
- * i2c_isr_set_cleared: - wait until certain bits of the I2C status register
- *	                  are set and cleared
- *
- * @return: 1 in case of success, 0 means timeout (no match within 10 ms).
- */
-static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
-{
-	int timeout = 10000;
-
-	while( ((ISR & set_mask)!=set_mask) || ((ISR & cleared_mask)!=0) ){
-		udelay( 10 );
-		if( timeout-- < 0 ) return 0;
-	}
-
-	return 1;
-}
-
-
-/**
- * i2c_transfer: - Transfer one byte over the i2c bus
- *
- * This function can tranfer a byte over the i2c bus in both directions.
- * It is used by the public API functions.
- *
- * @return:  0: transfer successful
- *          -1: message is empty
- *          -2: transmit timeout
- *          -3: ACK missing
- *          -4: receive timeout
- *          -5: illegal parameters
- *          -6: bus is busy and couldn't be aquired
- */
-int i2c_transfer(struct i2c_msg *msg)
-{
-	int ret;
-
-	if (!msg)
-		goto transfer_error_msg_empty;
-
-	switch(msg->direction) {
-
-	case I2C_WRITE:
-
-		/* check if bus is not busy */
-		if (!i2c_isr_set_cleared(0,ISR_IBB))
-			goto transfer_error_bus_busy;
-
-		/* start transmission */
-		ICR &= ~ICR_START;
-		ICR &= ~ICR_STOP;
-		IDBR = msg->data;
-		if (msg->condition == I2C_COND_START)     ICR |=  ICR_START;
-		if (msg->condition == I2C_COND_STOP)      ICR |=  ICR_STOP;
-		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
-		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
-		ICR &= ~ICR_ALDIE;
-		ICR |= ICR_TB;
-
-		/* transmit register empty? */
-		if (!i2c_isr_set_cleared(ISR_ITE,0))
-			goto transfer_error_transmit_timeout;
-
-		/* clear 'transmit empty' state */
-		ISR |= ISR_ITE;
-
-		/* wait for ACK from slave */
-		if (msg->acknack == I2C_ACKNAK_WAITACK)
-			if (!i2c_isr_set_cleared(0,ISR_ACKNAK))
-				goto transfer_error_ack_missing;
-		break;
-
-	case I2C_READ:
-
-		/* check if bus is not busy */
-		if (!i2c_isr_set_cleared(0,ISR_IBB))
-			goto transfer_error_bus_busy;
-
-		/* start receive */
-		ICR &= ~ICR_START;
-		ICR &= ~ICR_STOP;
-		if (msg->condition == I2C_COND_START)	  ICR |= ICR_START;
-		if (msg->condition == I2C_COND_STOP)	  ICR |= ICR_STOP;
-		if (msg->acknack   == I2C_ACKNAK_SENDNAK) ICR |=  ICR_ACKNAK;
-		if (msg->acknack   == I2C_ACKNAK_SENDACK) ICR &= ~ICR_ACKNAK;
-		ICR &= ~ICR_ALDIE;
-		ICR |= ICR_TB;
-
-		/* receive register full? */
-		if (!i2c_isr_set_cleared(ISR_IRF,0))
-			goto transfer_error_receive_timeout;
-
-		msg->data = IDBR;
-
-		/* clear 'receive empty' state */
-		ISR |= ISR_IRF;
-
-		break;
-
-	default:
-
-		goto transfer_error_illegal_param;
-
-	}
-
-	return 0;
-
-transfer_error_msg_empty:
-		PRINTD(("i2c_transfer: error: 'msg' is empty\n"));
-		ret = -1; goto i2c_transfer_finish;
-
-transfer_error_transmit_timeout:
-		PRINTD(("i2c_transfer: error: transmit timeout\n"));
-		ret = -2; goto i2c_transfer_finish;
-
-transfer_error_ack_missing:
-		PRINTD(("i2c_transfer: error: ACK missing\n"));
-		ret = -3; goto i2c_transfer_finish;
-
-transfer_error_receive_timeout:
-		PRINTD(("i2c_transfer: error: receive timeout\n"));
-		ret = -4; goto i2c_transfer_finish;
-
-transfer_error_illegal_param:
-		PRINTD(("i2c_transfer: error: illegal parameters\n"));
-		ret = -5; goto i2c_transfer_finish;
-
-transfer_error_bus_busy:
-		PRINTD(("i2c_transfer: error: bus is busy\n"));
-		ret = -6; goto i2c_transfer_finish;
-
-i2c_transfer_finish:
-		PRINTD(("i2c_transfer: ISR: 0x%04x\n",ISR));
-		i2c_reset();
-		return ret;
-
-}
-
-/* ------------------------------------------------------------------------ */
-/* API Functions                                                            */
-/* ------------------------------------------------------------------------ */
-
-void i2c_init(int speed, int slaveaddr)
-{
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-	/* call board specific i2c bus reset routine before accessing the   */
-	/* environment, which might be in a chip on that bus. For details   */
-	/* about this problem see doc/I2C_Edge_Conditions.                  */
-	i2c_init_board();
-#endif
-}
-
-
-/**
- * i2c_probe: - Test if a chip answers for a given i2c address
- *
- * @chip:	address of the chip which is searched for
- * @return:	0 if a chip was found, -1 otherwhise
- */
-
-int i2c_probe(uchar chip)
-{
-	struct i2c_msg msg;
-
-	i2c_reset();
-
-	msg.condition = I2C_COND_START;
-	msg.acknack   = I2C_ACKNAK_WAITACK;
-	msg.direction = I2C_WRITE;
-	msg.data      = (chip << 1) + 1;
-	if (i2c_transfer(&msg)) return -1;
-
-	msg.condition = I2C_COND_STOP;
-	msg.acknack   = I2C_ACKNAK_SENDNAK;
-	msg.direction = I2C_READ;
-	msg.data      = 0x00;
-	if (i2c_transfer(&msg)) return -1;
-
-	return 0;
-}
-
-
-/**
- * i2c_read: - Read multiple bytes from an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip:	address of the chip which is to be read
- * @addr:	i2c data address within the chip
- * @alen:	length of the i2c data address (1..2 bytes)
- * @buffer:	where to write the data
- * @len:	how much byte do we want to read
- * @return:	0 in case of success
- */
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	struct i2c_msg msg;
-	u8 addr_bytes[3]; /* lowest...highest byte of data address */
-	int ret;
-
-	PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
-
-	i2c_reset();
-
-	/* dummy chip address write */
-	PRINTD(("i2c_read: dummy chip address write\n"));
-	msg.condition = I2C_COND_START;
-	msg.acknack   = I2C_ACKNAK_WAITACK;
-	msg.direction = I2C_WRITE;
-	msg.data      = (chip << 1);
-	msg.data     &= 0xFE;
-	if ((ret=i2c_transfer(&msg))) return -1;
-
-	/*
-	 * send memory address bytes;
-	 * alen defines how much bytes we have to send.
-	 */
-	/*addr &= ((1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)-1); */
-	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
-	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
-	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
-
-	while (--alen >= 0) {
-
-		PRINTD(("i2c_read: send memory word address byte %1d\n",alen));
-		msg.condition = I2C_COND_NORMAL;
-		msg.acknack   = I2C_ACKNAK_WAITACK;
-		msg.direction = I2C_WRITE;
-		msg.data      = addr_bytes[alen];
-		if ((ret=i2c_transfer(&msg))) return -1;
-	}
-
-
-	/* start read sequence */
-	PRINTD(("i2c_read: start read sequence\n"));
-	msg.condition = I2C_COND_START;
-	msg.acknack   = I2C_ACKNAK_WAITACK;
-	msg.direction = I2C_WRITE;
-	msg.data      = (chip << 1);
-	msg.data     |= 0x01;
-	if ((ret=i2c_transfer(&msg))) return -1;
-
-	/* read bytes; send NACK at last byte */
-	while (len--) {
-
-		if (len==0) {
-			msg.condition = I2C_COND_STOP;
-			msg.acknack   = I2C_ACKNAK_SENDNAK;
-		} else {
-			msg.condition = I2C_COND_NORMAL;
-			msg.acknack   = I2C_ACKNAK_SENDACK;
-		}
-
-		msg.direction = I2C_READ;
-		msg.data      = 0x00;
-		if ((ret=i2c_transfer(&msg))) return -1;
-
-		*buffer = msg.data;
-		PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
-		buffer++;
-
-	}
-
-	i2c_reset();
-
-	return 0;
-}
-
-
-/**
- * i2c_write: -  Write multiple bytes to an i2c device
- *
- * The higher level routines take into account that this function is only
- * called with len < page length of the device (see configuration file)
- *
- * @chip:	address of the chip which is to be written
- * @addr:	i2c data address within the chip
- * @alen:	length of the i2c data address (1..2 bytes)
- * @buffer:	where to find the data to be written
- * @len:	how much byte do we want to read
- * @return:	0 in case of success
- */
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
-	struct i2c_msg msg;
-	u8 addr_bytes[3]; /* lowest...highest byte of data address */
-
-	PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, len=0x%02x)\n",chip,addr,alen,len));
-
-	i2c_reset();
-
-	/* chip address write */
-	PRINTD(("i2c_write: chip address write\n"));
-	msg.condition = I2C_COND_START;
-	msg.acknack   = I2C_ACKNAK_WAITACK;
-	msg.direction = I2C_WRITE;
-	msg.data      = (chip << 1);
-	msg.data     &= 0xFE;
-	if (i2c_transfer(&msg)) return -1;
-
-	/*
-	 * send memory address bytes;
-	 * alen defines how much bytes we have to send.
-	 */
-	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
-	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
-	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
-
-	while (--alen >= 0) {
-
-		PRINTD(("i2c_write: send memory word address\n"));
-		msg.condition = I2C_COND_NORMAL;
-		msg.acknack   = I2C_ACKNAK_WAITACK;
-		msg.direction = I2C_WRITE;
-		msg.data      = addr_bytes[alen];
-		if (i2c_transfer(&msg)) return -1;
-	}
-
-	/* write bytes; send NACK at last byte */
-	while (len--) {
-
-		PRINTD(("i2c_write: writing byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
-
-		if (len==0)
-			msg.condition = I2C_COND_STOP;
-		else
-			msg.condition = I2C_COND_NORMAL;
-
-		msg.acknack   = I2C_ACKNAK_WAITACK;
-		msg.direction = I2C_WRITE;
-		msg.data      = *(buffer++);
-
-		if (i2c_transfer(&msg)) return -1;
-
-	}
-
-	i2c_reset();
-
-	return 0;
-
-}
-
-#endif	/* CONFIG_HARD_I2C */
diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c
deleted file mode 100644
index d56c5f099f..0000000000
--- a/cpu/pxa/pxafb.c
+++ /dev/null
@@ -1,471 +0,0 @@
-/*
- * PXA LCD Controller
- *
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************/
-/* ** HEADER FILES							*/
-/************************************************************************/
-
-#include <config.h>
-#include <common.h>
-#include <version.h>
-#include <stdarg.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-#include <lcd.h>
-#include <asm/arch/pxa-regs.h>
-
-/* #define DEBUG */
-
-#ifdef CONFIG_LCD
-
-/*----------------------------------------------------------------------*/
-/*
- * Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
- * your display.
- */
-
-#ifdef CONFIG_PXA_VGA
-/* LCD outputs connected to a video DAC  */
-# define LCD_BPP	LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x003008f8
-# define REG_LCCR3	0x0300FF01
-
-/* 640x480x16 @ 61 Hz */
-vidinfo_t panel_info = {
-	vl_col:		640,
-	vl_row:		480,
-	vl_width:	640,
-	vl_height:	480,
-	vl_clkp:	CONFIG_SYS_HIGH,
-	vl_oep:		CONFIG_SYS_HIGH,
-	vl_hsp:		CONFIG_SYS_HIGH,
-	vl_vsp:		CONFIG_SYS_HIGH,
-	vl_dp:		CONFIG_SYS_HIGH,
-	vl_bpix:	LCD_BPP,
-	vl_lbw:		0,
-	vl_splt:	0,
-	vl_clor:	0,
-	vl_tft:		1,
-	vl_hpw:		40,
-	vl_blw:		56,
-	vl_elw:		56,
-	vl_vpw:		20,
-	vl_bfw:		8,
-	vl_efw:		8,
-};
-#endif /* CONFIG_PXA_VIDEO */
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_SHARP_LM8V31
-
-# define LCD_BPP	LCD_COLOR8
-# define LCD_INVERT_COLORS	/* Needed for colors to be correct, but why?	*/
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-# define REG_LCCR0	0x0030087C
-# define REG_LCCR3	0x0340FF08
-
-vidinfo_t panel_info = {
-	vl_col:		640,
-	vl_row:		480,
-	vl_width:	157,
-	vl_height:	118,
-	vl_clkp:	CONFIG_SYS_HIGH,
-	vl_oep:		CONFIG_SYS_HIGH,
-	vl_hsp:		CONFIG_SYS_HIGH,
-	vl_vsp:		CONFIG_SYS_HIGH,
-	vl_dp:		CONFIG_SYS_HIGH,
-	vl_bpix:	LCD_BPP,
-	vl_lbw:		0,
-	vl_splt:	1,
-	vl_clor:	1,
-	vl_tft:		0,
-	vl_hpw:		1,
-	vl_blw:		3,
-	vl_elw:		3,
-	vl_vpw:		1,
-	vl_bfw:		0,
-	vl_efw:		0,
-};
-#endif /* CONFIG_SHARP_LM8V31 */
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_HITACHI_SX14
-/* Hitachi SX14Q004-ZZA color STN LCD */
-#define LCD_BPP		LCD_COLOR8
-
-/* you have to set lccr0 and lccr3 (including pcd) */
-#define REG_LCCR0	0x00301079
-#define REG_LCCR3	0x0340FF20
-
-vidinfo_t panel_info = {
-	vl_col:		320,
-	vl_row:		240,
-	vl_width:	167,
-	vl_height:	109,
-	vl_clkp:	CONFIG_SYS_HIGH,
-	vl_oep:		CONFIG_SYS_HIGH,
-	vl_hsp:		CONFIG_SYS_HIGH,
-	vl_vsp:		CONFIG_SYS_HIGH,
-	vl_dp:		CONFIG_SYS_HIGH,
-	vl_bpix:	LCD_BPP,
-	vl_lbw:		1,
-	vl_splt:	0,
-	vl_clor:	1,
-	vl_tft:		0,
-	vl_hpw:		1,
-	vl_blw:		1,
-	vl_elw:		1,
-	vl_vpw:		7,
-	vl_bfw:		0,
-	vl_efw:		0,
-};
-#endif /* CONFIG_HITACHI_SX14 */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#ifdef NOT_USED_SO_FAR
-void lcd_disable (void);
-void lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue);
-#endif /* NOT_USED_SO_FAR */
-
-void lcd_ctrl_init	(void *lcdbase);
-void lcd_enable	(void);
-
-int lcd_line_length;
-int lcd_color_fg;
-int lcd_color_bg;
-
-void *lcd_base;			/* Start of framebuffer memory	*/
-void *lcd_console_address;		/* Start of console buffer	*/
-
-short console_col;
-short console_row;
-
-static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
-static void pxafb_setup_gpio (vidinfo_t *vid);
-static void pxafb_enable_controller (vidinfo_t *vid);
-static int pxafb_init (vidinfo_t *vid);
-/************************************************************************/
-
-/************************************************************************/
-/* ---------------  PXA chipset specific functions  ------------------- */
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase)
-{
-	pxafb_init_mem(lcdbase, &panel_info);
-	pxafb_init(&panel_info);
-	pxafb_setup_gpio(&panel_info);
-	pxafb_enable_controller(&panel_info);
-}
-
-/*----------------------------------------------------------------------*/
-#ifdef NOT_USED_SO_FAR
-void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
-	struct pxafb_info *fbi = &panel_info.pxa;
-	unsigned short *palette = (unsigned short *)fbi->palette;
-	u_int val;
-
-	if (regno < fbi->palette_size) {
-		val = ((red << 8) & 0xf800);
-		val |= ((green << 4) & 0x07e0);
-		val |= (blue & 0x001f);
-
-#ifdef LCD_INVERT_COLORS
-		palette[regno] = ~val;
-#else
-		palette[regno] = val;
-#endif
-	}
-
-	debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n",
-		regno, &palette[regno],
-		red, green, blue,
-		palette[regno]);
-}
-#endif /* LCD_COLOR8 */
-
-/*----------------------------------------------------------------------*/
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void)
-{
-	struct pxafb_info *fbi = &panel_info.pxa;
-	cmap = (ushort *)fbi->palette;
-	ushort regno;
-
-	for (regno = 0; regno < 16; regno++) {
-		cmap[regno * 2] = 0;
-		cmap[(regno * 2) + 1] = regno & 0x0f;
-	}
-}
-#endif /* LCD_MONOCHROME */
-
-/*----------------------------------------------------------------------*/
-void lcd_enable (void)
-{
-}
-
-/*----------------------------------------------------------------------*/
-#ifdef	NOT_USED_SO_FAR
-static void lcd_disable (void)
-{
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-/************************************************************************/
-/* ** PXA255 specific routines						*/
-/************************************************************************/
-
-/*
- * Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
- * descriptors and palette areas.
- */
-ulong calc_fbsize (void)
-{
-	ulong size;
-	int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
-	size = line_length * panel_info.vl_row;
-	size += PAGE_SIZE;
-
-	return size;
-}
-
-static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
-{
-	u_long palette_mem_size;
-	struct pxafb_info *fbi = &vid->pxa;
-	int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
-
-	fbi->screen = (u_long)lcdbase;
-
-	fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
-	palette_mem_size = fbi->palette_size * sizeof(u16);
-
-	debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
-	/* locate palette and descs at end of page following fb */
-	fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
-
-	return 0;
-}
-
-static void pxafb_setup_gpio (vidinfo_t *vid)
-{
-	u_long lccr0;
-
-	/*
-	 * setup is based on type of panel supported
-	 */
-
-	lccr0 = vid->pxa.reg_lccr0;
-
-	/* 4 bit interface */
-	if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD))
-	{
-		debug("Setting GPIO for 4 bit data\n");
-		/* bits 58-61 */
-		GPDR1 |= (0xf << 26);
-		GAFR1_U = (GAFR1_U & ~(0xff << 20)) | (0xaa << 20);
-
-		/* bits 74-77 */
-		GPDR2 |= (0xf << 10);
-		GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
-	}
-
-	/* 8 bit interface */
-	else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) ||
-		(!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
-	{
-		debug("Setting GPIO for 8 bit data\n");
-		/* bits 58-65 */
-		GPDR1 |= (0x3f << 26);
-		GPDR2 |= (0x3);
-
-		GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
-		GAFR2_L = (GAFR2_L & ~0xf) | (0xa);
-
-		/* bits 74-77 */
-		GPDR2 |= (0xf << 10);
-		GAFR2_L = (GAFR2_L & ~(0xff << 20)) | (0xaa << 20);
-	}
-
-	/* 16 bit interface */
-	else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS)))
-	{
-		debug("Setting GPIO for 16 bit data\n");
-		/* bits 58-77 */
-		GPDR1 |= (0x3f << 26);
-		GPDR2 |= 0x00003fff;
-
-		GAFR1_U = (GAFR1_U & ~(0xfff << 20)) | (0xaaa << 20);
-		GAFR2_L = (GAFR2_L & 0xf0000000) | 0x0aaaaaaa;
-	}
-	else
-	{
-		printf("pxafb_setup_gpio: unable to determine bits per pixel\n");
-	}
-}
-
-static void pxafb_enable_controller (vidinfo_t *vid)
-{
-	debug("Enabling LCD controller\n");
-
-	/* Sequence from 11.7.10 */
-	LCCR3  = vid->pxa.reg_lccr3;
-	LCCR2  = vid->pxa.reg_lccr2;
-	LCCR1  = vid->pxa.reg_lccr1;
-	LCCR0  = vid->pxa.reg_lccr0 & ~LCCR0_ENB;
-	FDADR0 = vid->pxa.fdadr0;
-	FDADR1 = vid->pxa.fdadr1;
-	LCCR0 |= LCCR0_ENB;
-
-	CKEN |= CKEN16_LCD;
-
-	debug("FDADR0 = 0x%08x\n", (unsigned int)FDADR0);
-	debug("FDADR1 = 0x%08x\n", (unsigned int)FDADR1);
-	debug("LCCR0 = 0x%08x\n", (unsigned int)LCCR0);
-	debug("LCCR1 = 0x%08x\n", (unsigned int)LCCR1);
-	debug("LCCR2 = 0x%08x\n", (unsigned int)LCCR2);
-	debug("LCCR3 = 0x%08x\n", (unsigned int)LCCR3);
-}
-
-static int pxafb_init (vidinfo_t *vid)
-{
-	struct pxafb_info *fbi = &vid->pxa;
-
-	debug("Configuring PXA LCD\n");
-
-	fbi->reg_lccr0 = REG_LCCR0;
-	fbi->reg_lccr3 = REG_LCCR3;
-
-	debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n",
-		vid->vl_col, vid->vl_hpw,
-		vid->vl_blw, vid->vl_elw);
-	debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n",
-		vid->vl_row, vid->vl_vpw,
-		vid->vl_bfw, vid->vl_efw);
-
-	fbi->reg_lccr1 =
-		LCCR1_DisWdth(vid->vl_col) +
-		LCCR1_HorSnchWdth(vid->vl_hpw) +
-		LCCR1_BegLnDel(vid->vl_blw) +
-		LCCR1_EndLnDel(vid->vl_elw);
-
-	fbi->reg_lccr2 =
-		LCCR2_DisHght(vid->vl_row) +
-		LCCR2_VrtSnchWdth(vid->vl_vpw) +
-		LCCR2_BegFrmDel(vid->vl_bfw) +
-		LCCR2_EndFrmDel(vid->vl_efw);
-
-	fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP);
-	fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
-			| (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
-
-
-	/* setup dma descriptors */
-	fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
-	fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
-	fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
-
-	#define BYTES_PER_PANEL	((fbi->reg_lccr0 & LCCR0_SDS) ? \
-		(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \
-		(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8))
-
-	/* populate descriptors */
-	fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow;
-	fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL;
-	fbi->dmadesc_fblow->fidr  = 0;
-	fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL;
-
-	fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */
-
-	fbi->dmadesc_fbhigh->fsadr = fbi->screen;
-	fbi->dmadesc_fbhigh->fidr = 0;
-	fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL;
-
-	fbi->dmadesc_palette->fsadr = fbi->palette;
-	fbi->dmadesc_palette->fidr  = 0;
-	fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
-
-	if( NBITS(vid->vl_bpix) < 12)
-	{
-		/* assume any mode with <12 bpp is palette driven */
-		fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh;
-		fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette;
-		/* flips back and forth between pal and fbhigh */
-		fbi->fdadr0 = (u_long)fbi->dmadesc_palette;
-	}
-	else
-	{
-		/* palette shouldn't be loaded in true-color mode */
-		fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh;
-		fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */
-	}
-
-	debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow);
-	debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh);
-	debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette);
-
-	debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr);
-	debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr);
-	debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr);
-
-	debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr);
-	debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr);
-	debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr);
-
-	debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd);
-	debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd);
-	debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd);
-
-	return 0;
-}
-
-/************************************************************************/
-/************************************************************************/
-
-#endif /* CONFIG_LCD */
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
deleted file mode 100644
index 63ab0c591a..0000000000
--- a/cpu/pxa/start.S
+++ /dev/null
@@ -1,498 +0,0 @@
-/*
- *  armboot - Startup Code for XScale
- *
- *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
- *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- *  Copyright (C) 2000	Wolfgang Denk <wd@denx.de>
- *  Copyright (C) 2001	Alex Zuepke <azu@sysgo.de>
- *  Copyright (C) 2002	Kyle Harris <kharris@nexus-tech.net>
- *  Copyright (C) 2003	Robert Schwebel <r.schwebel@pengutronix.de>
- *  Copyright (C) 2003	Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/pxa-regs.h>
-
-.globl _start
-_start: b	reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from RAM!
- * - relocate armboot to RAM
- * - setup stack
- * - jump to second stage
- */
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
-	.word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif /* CONFIG_USE_IRQ */
-
-
-/****************************************************************************/
-/*									    */
-/* the actual reset code						    */
-/*									    */
-/****************************************************************************/
-
-reset:
-	mrs	r0,cpsr			/* set the CPU to SVC32 mode	    */
-	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
-	orr	r0,r0,#0x13
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from RAM!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit		/* we do sys-critical inits	    */
-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* don't reloc during debug	    */
-	beq	stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot	    */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	ble	copy_loop
-#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif /* CONFIG_USE_IRQ */
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment	    */
-	ldr	r1, _bss_end		/* stop here			    */
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:str	r2, [r0]		/* clear loop...		    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	ble	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot: .word start_armboot
-
-
-/****************************************************************************/
-/*									    */
-/* CPU_init_critical registers						    */
-/*									    */
-/* - setup important registers						    */
-/* - setup memory timing						    */
-/*									    */
-/****************************************************************************/
-/* mk@tbd: Fix this! */
-#undef RCSR
-#undef ICMR
-#undef OSMR3
-#undef OSCR
-#undef OWER
-#undef OIER
-#undef CCCR
-
-/* Interrupt-Controller base address					    */
-IC_BASE:	   .word	   0x40d00000
-#define ICMR	0x04
-
-/* Reset-Controller */
-RST_BASE:	.word	0x40f00030
-#define RCSR	0x00
-
-/* Operating System Timer */
-OSTIMER_BASE:	.word	0x40a00000
-#define OSMR3	0x0C
-#define OSCR	0x10
-#define OWER	0x18
-#define OIER	0x1C
-
-/* Clock Manager Registers						    */
-#ifdef CONFIG_CPU_MONAHANS
-# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
-#  error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */
-# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
-#  define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */
-#else /* !CONFIG_CPU_MONAHANS */
-#ifdef CONFIG_SYS_CPUSPEED
-CC_BASE:	.word	0x41300000
-#define CCCR	0x00
-cpuspeed:	.word	CONFIG_SYS_CPUSPEED
-#else /* !CONFIG_SYS_CPUSPEED */
-#error "You have to define CONFIG_SYS_CPUSPEED!!"
-#endif /* CONFIG_SYS_CPUSPEED */
-#endif /* CONFIG_CPU_MONAHANS */
-
-	/* takes care the CP15 update has taken place */
-	.macro CPWAIT reg
-	mrc  p15,0,\reg,c2,c0,0
-	mov  \reg,\reg
-	sub  pc,pc,#4
-	.endm
-
-cpu_init_crit:
-
-	/* mask all IRQs						    */
-#ifndef CONFIG_CPU_MONAHANS
-	ldr	r0, IC_BASE
-	mov	r1, #0x00
-	str	r1, [r0, #ICMR]
-#else /* CONFIG_CPU_MONAHANS */
-	/* Step 1 - Enable CP6 permission */
-	mrc	p15, 0, r1, c15, c1, 0	@ read CPAR
-	orr	r1, r1, #0x40
-		mcr	p15, 0, r1, c15, c1, 0
-	CPWAIT	r1
-
-	/* Step 2 - Mask ICMR & ICMR2 */
-	mov	r1, #0
-	mcr	p6, 0, r1, c1, c0, 0	@ ICMR
-	mcr	p6, 0, r1, c7, c0, 0	@ ICMR2
-
-	/* turn off all clocks but the ones we will definitly require */
-	ldr	r1, =CKENA
-	ldr	r2, =(CKENA_22_FFUART | CKENA_10_SRAM | CKENA_9_SMC | CKENA_8_DMC)
-	str	r2, [r1]
-	ldr	r1, =CKENB
-	ldr	r2, =(CKENB_6_IRQ)
-	str	r2, [r1]
-#endif /* !CONFIG_CPU_MONAHANS */
-
-	/* set clock speed */
-#ifdef CONFIG_CPU_MONAHANS
-	ldr	r0, =ACCR
-	ldr	r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
-	str	r1, [r0]
-#else /* !CONFIG_CPU_MONAHANS */
-#ifdef CONFIG_SYS_CPUSPEED
-	ldr	r0, CC_BASE
-	ldr	r1, cpuspeed
-	str	r1, [r0, #CCCR]
-	mov	r0, #2
-	mcr	p14, 0, r0, c6, c0, 0
-
-setspeed_done:
-
-#endif /* CONFIG_SYS_CPUSPEED */
-#endif /* CONFIG_CPU_MONAHANS */
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip,	lr
-	bl	lowlevel_init
-	mov	lr,	ip
-
-	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
-	/* mk: hmm, this is not in the monahans docs, leave it now but
-	 *     check here if it doesn't work :-) */
-
-	ldr	r0, =0x2001		/* enable access to all coproc.	    */
-	mcr	p15, 0, r0, c15, c1, 0
-	CPWAIT r0
-
-	mcr	p15, 0, r0, c7, c10, 4	/* drain the write & fill buffers   */
-	CPWAIT r0
-
-	mcr	p15, 0, r0, c7, c7, 0	/* flush Icache, Dcache and BTB	    */
-	CPWAIT r0
-
-	mcr	p15, 0, r0, c8, c7, 0	/* flush instuction and data TLBs   */
-	CPWAIT r0
-
-	/* Enable the Icache						    */
-/*
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #0x1800
-	mcr	p15, 0, r0, c1, c0, 0
-	CPWAIT
-*/
-	mov	pc, lr
-
-
-/****************************************************************************/
-/*									    */
-/* Interrupt handling							    */
-/*									    */
-/****************************************************************************/
-
-/* IRQ stack frame							    */
-
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-
-	/* use bad_save_user_regs for abort/prefetch/undef/swi ...	    */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
-	add	r8, sp, #S_PC
-
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
-	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
-	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r4}			/* save sp_SVC, lr_SVC, pc, cpsr, old_r */
-	mov	r0, sp
-	.endm
-
-
-	/* use irq_save_user_regs / irq_restore_user_regs for		     */
-	/* IRQ/FIQ handling						     */
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12	     */
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			/* Calling SP, LR	     */
-	str	lr, [r8, #0]			/* Save calling PC	     */
-	mrs	r6, spsr
-	str	r6, [r8, #4]			/* Save CPSR		     */
-	str	r0, [r8, #8]			/* Save OLD_R0		     */
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str	lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	msr	spsr_c, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-
-/****************************************************************************/
-/*									    */
-/* exception handlers							    */
-/*									    */
-/****************************************************************************/
-
-	.align	5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	irq_save_user_regs		/* someone ought to write a more    */
-	bl	do_fiq			/* effiction fiq_save_user_regs	    */
-	irq_restore_user_regs
-
-#else /* !CONFIG_USE_IRQ */
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif /* CONFIG_USE_IRQ */
-
-/****************************************************************************/
-/*									    */
-/* Reset function: the PXA250 doesn't have a reset function, so we have to  */
-/* perform a watchdog timeout for a soft reset.				    */
-/*									    */
-/****************************************************************************/
-
-	.align	5
-.globl reset_cpu
-
-	/* FIXME: this code is PXA250 specific. How is this handled on	    */
-	/*	  other XScale processors?				    */
-
-reset_cpu:
-
-	/* We set OWE:WME (watchdog enable) and wait until timeout happens  */
-
-	ldr	r0, OSTIMER_BASE
-	ldr	r1, [r0, #OWER]
-	orr	r1, r1, #0x0001			/* bit0: WME		    */
-	str	r1, [r0, #OWER]
-
-	/* OS timer does only wrap every 1165 seconds, so we have to set    */
-	/* the match register as well.					    */
-
-	ldr	r1, [r0, #OSCR]			/* read OS timer	    */
-	add	r1, r1, #0x800			/* let OSMR3 match after    */
-	add	r1, r1, #0x800			/* 4096*(1/3.6864MHz)=1ms   */
-	str	r1, [r0, #OSMR3]
-
-reset_endless:
-
-	b	reset_endless
diff --git a/cpu/pxa/timer.c b/cpu/pxa/timer.c
deleted file mode 100644
index 8d0f82679b..0000000000
--- a/cpu/pxa/timer.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-#include <div64.h>
-
-#ifdef CONFIG_USE_IRQ
-#error: interrupts not implemented yet
-#endif
-
-#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-#define TIMER_FREQ_HZ 3250000
-#elif defined(CONFIG_PXA250)
-#define TIMER_FREQ_HZ 3686400
-#else
-#error "Timer frequency unknown - please config PXA CPU type"
-#endif
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
-	tick *= CONFIG_SYS_HZ;
-	do_div(tick, TIMER_FREQ_HZ);
-	return tick;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
-	us = us * TIMER_FREQ_HZ + 999999;
-	do_div(us, 1000000);
-	return us;
-}
-
-int timer_init (void)
-{
-	reset_timer();
-
-	return 0;
-}
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	/* nop */
-}
-
-void __udelay (unsigned long usec)
-{
-	udelay_masked (usec);
-}
-
-
-void reset_timer_masked (void)
-{
-	OSCR = 0;
-}
-
-ulong get_timer_masked (void)
-{
-	return tick_to_time(get_ticks());
-}
-
-void udelay_masked (unsigned long usec)
-{
-	unsigned long long tmp;
-	ulong tmo;
-
-	tmo = us_to_tick(usec);
-	tmp = get_ticks() + tmo;	/* get current timestamp */
-
-	while (get_ticks() < tmp)	/* loop till event */
-		 /*NOP*/;
-
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return OSCR;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-	tbclk = TIMER_FREQ_HZ;
-	return tbclk;
-}
diff --git a/cpu/pxa/u-boot.lds b/cpu/pxa/u-boot.lds
deleted file mode 100644
index 77ab3c902b..0000000000
--- a/cpu/pxa/u-boot.lds
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		cpu/pxa/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
-	_end = .;
-}
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
deleted file mode 100644
index bd718a6fff..0000000000
--- a/cpu/pxa/usb.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2006
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
-
-#include <asm/arch/pxa-regs.h>
-#include <usb.h>
-
-int usb_cpu_init(void)
-{
-#if defined(CONFIG_CPU_MONAHANS)
-	/* Enable USB host clock. */
-	CKENA |= (CKENA_2_USBHOST |  CKENA_20_UDC);
-	udelay(100);
-#endif
-#if defined(CONFIG_PXA27X)
-	/* Enable USB host clock. */
-	CKEN |= CKEN10_USBHOST;
-#endif
-
-#if defined(CONFIG_CPU_MONAHANS)
-	/* Configure Port 2 for Host (USB Client Registers) */
-	UP2OCR = 0x3000c;
-#endif
-
-	UHCHR |= UHCHR_FHR;
-	wait_ms(11);
-	UHCHR &= ~UHCHR_FHR;
-
-	UHCHR |= UHCHR_FSBIR;
-	while (UHCHR & UHCHR_FSBIR)
-		udelay(1);
-
-#if defined(CONFIG_CPU_MONAHANS)
-	UHCHR &= ~UHCHR_SSEP0;
-#endif
-#if defined(CONFIG_PXA27X)
-	UHCHR &= ~UHCHR_SSEP2;
-#endif
-	UHCHR &= ~UHCHR_SSEP1;
-	UHCHR &= ~UHCHR_SSE;
-
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	UHCHR |= UHCHR_FHR;
-	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
-
-	UHCCOMS |= 1;
-	udelay(10);
-
-#if defined(CONFIG_CPU_MONAHANS)
-	UHCHR |= UHCHR_SSEP0;
-#endif
-#if defined(CONFIG_PXA27X)
-	UHCHR |= UHCHR_SSEP2;
-#endif
-	UHCHR |= UHCHR_SSEP1;
-	UHCHR |= UHCHR_SSE;
-
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	UHCHR |= UHCHR_FHR;
-	udelay(11);
-	UHCHR &= ~UHCHR_FHR;
-
-	UHCCOMS |= 1;
-	udelay(10);
-
-#if defined(CONFIG_CPU_MONAHANS)
-	UHCHR |= UHCHR_SSEP0;
-#endif
-#if defined(CONFIG_PXA27X)
-	UHCHR |= UHCHR_SSEP2;
-#endif
-	UHCHR |= UHCHR_SSEP1;
-	UHCHR |= UHCHR_SSE;
-
-	return 0;
-}
-
-# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */