Coding style cleanup, update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

14 files changed, 50 insertions, 62 deletions

diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c
index 040ba89765..1ba21edf72 100644
--- a/board/a3000/a3000.c
+++ b/board/a3000/a3000.c
@@ -115,4 +115,3 @@ int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);
 }
-
diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c
index 8f30ed966b..e9f80ff5ce 100644
--- a/board/amirix/ap1000/ap1000.c
+++ b/board/amirix/ap1000/ap1000.c
@@ -703,4 +703,3 @@ int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);
 }
-
diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds
index 015f58b45e..e9f8dc0def 100644
--- a/board/ap325rxa/u-boot.lds
+++ b/board/ap325rxa/u-boot.lds
@@ -103,4 +103,3 @@ SECTIONS
 
 	PROVIDE (_end = .);
 }
-
diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c
index ae3ca24221..74417c44f9 100644
--- a/board/mucmc52/mucmc52.c
+++ b/board/mucmc52/mucmc52.c
@@ -192,22 +192,22 @@ phys_size_t initdram (int board_type)
 #endif /* CFG_RAMBOOT */
 
 	 /*
-         * On MPC5200B we need to set the special configuration delay in the
-         * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
-         * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
-         *
-         * "The SDelay should be written to a value of 0x00000004. It is
-         * required to account for changes caused by normal wafer processing
-         * parameters."
-         */
-        svr = get_svr();
-        pvr = get_pvr();
-        if ((SVR_MJREV(svr) >= 2) &&
-            (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
-                out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
-                __asm__ volatile ("sync");
-        }
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
+		__asm__ volatile ("sync");
+	}
 
 	return dramsize + dramsize2;
 }
@@ -339,14 +339,14 @@ int misc_init_r (void)
 	free (str);
 #endif /* CONFIG_PREBOOT */
 
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), ' ');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), ' ');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), ' ');
 
 	return 0;
 }
@@ -365,16 +365,16 @@ int board_early_init_r (void)
 
 int last_stage_init (void)
 {
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), 'M');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), 'U');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), 'C');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), '.');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), 'M');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), 'C');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), '5');
-        out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), '2');
-
-        return 0;
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x38), 'M');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x39), 'U');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3A), 'C');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3B), '.');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3C), 'M');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3D), 'C');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3E), '5');
+	out_8 ((volatile uchar *)(CFG_DISPLAY_BASE + 0x3F), '2');
+
+	return 0;
 }
 
 #if defined(CONFIG_HW_WATCHDOG)
diff --git a/board/purple/purple.c b/board/purple/purple.c
index c129d7a109..900e66f72f 100644
--- a/board/purple/purple.c
+++ b/board/purple/purple.c
@@ -282,4 +282,3 @@ int board_eth_init(bd_t *bis)
 	return plb2800_eth_initialize(bis);
 }
 #endif
-
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index 034c810f7b..e0119a771c 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -2,7 +2,7 @@
  * Memory Setup stuff - taken from blob memsetup.S
  *
  * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
  *
  * Modified for the Samsung SMDK2410 by
  * (C) Copyright 2002
@@ -73,8 +73,8 @@ lowlevel_init:
 	ldr	r1, [r0]
 	str	r1, [r0]
 
-	ldr	r0, =ELFIN_VIC0_BASE_ADDR 	@0x71200000
-	ldr	r1, =ELFIN_VIC1_BASE_ADDR 	@0x71300000
+	ldr	r0, =ELFIN_VIC0_BASE_ADDR	@0x71200000
+	ldr	r1, =ELFIN_VIC1_BASE_ADDR	@0x71300000
 
 	/* Disable all interrupts (VIC0 and VIC1) */
 	mvn	r3, #0x0
@@ -107,11 +107,11 @@ lowlevel_init:
 	bl	mem_ctrl_asm_init
 
 /* Wakeup support. Don't know if it's going to be used, untested. */
-        ldr     r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
-        ldr     r1, [r0]
-        bic     r1, r1, #0xfffffff7
-        cmp     r1, #0x8
-        beq     wakeup_reset
+	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
+	ldr	r1, [r0]
+	bic	r1, r1, #0xfffffff7
+	cmp	r1, #0x8
+	beq	wakeup_reset
 
 1:
 	mov	lr, r12
@@ -124,10 +124,10 @@ wakeup_reset:
 	ldr	r1, [r0]
 	str	r1, [r0]
 
-        /* LED test */
-        ldr     r0, =ELFIN_GPIO_BASE
-        ldr     r1, =0x3000
-        str     r1, [r0, #GPNDAT_OFFSET]
+	/* LED test */
+	ldr	r0, =ELFIN_GPIO_BASE
+	ldr	r1, =0x3000
+	str	r1, [r0, #GPNDAT_OFFSET]
 
 	/* Load return address and jump to kernel */
 	ldr	r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
@@ -201,7 +201,7 @@ wait_for_async:
 	str	r1, [r0, #MPLL_LOCK_OFFSET]
 
 	/* Set Clock Divider */
-	ldr   	r1, [r0, #CLK_DIV0_OFFSET]
+	ldr	r1, [r0, #CLK_DIV0_OFFSET]
 	bic	r1, r1, #0x30000
 	bic	r1, r1, #0xff00
 	bic	r1, r1, #0xff
@@ -252,7 +252,7 @@ uart_asm_init:
 	/* set GPIO to enable UART */
 	ldr	r0, =ELFIN_GPIO_BASE
 	ldr	r1, =0x220022
-	str   	r1, [r0, #GPACON_OFFSET]
+	str	r1, [r0, #GPACON_OFFSET]
 	mov	pc, lr
 #endif
 
@@ -265,11 +265,11 @@ nand_asm_init:
 	ldr	r1, [r0, #NFCONF_OFFSET]
 	orr	r1, r1, #0x70
 	orr	r1, r1, #0x7700
-	str     r1, [r0, #NFCONF_OFFSET]
+	str	r1, [r0, #NFCONF_OFFSET]
 
 	ldr	r1, [r0, #NFCONT_OFFSET]
 	orr	r1, r1, #0x07
-	str     r1, [r0, #NFCONT_OFFSET]
+	str	r1, [r0, #NFCONT_OFFSET]
 
 	mov	pc, lr
 #endif
diff --git a/board/sh7785lcr/config.mk b/board/sh7785lcr/config.mk
index 93761eec87..20807dfc52 100644
--- a/board/sh7785lcr/config.mk
+++ b/board/sh7785lcr/config.mk
@@ -23,4 +23,3 @@
 # NOTE: Must match value used in u-boot.lds (in this directory).
 #
 TEXT_BASE = 0x0ff80000
-
diff --git a/board/sh7785lcr/lowlevel_init.S b/board/sh7785lcr/lowlevel_init.S
index 8126296e5b..50e1789cc5 100644
--- a/board/sh7785lcr/lowlevel_init.S
+++ b/board/sh7785lcr/lowlevel_init.S
@@ -315,4 +315,3 @@ CS_I2C_WCR_D:	.long	0x00000003
 
 CCR_A:		.long	0xff00001c
 CCR_D:		.long	0x0000090b
-
diff --git a/board/sh7785lcr/rtl8169.h b/board/sh7785lcr/rtl8169.h
index d1c0d64b1d..ca9c0bd94c 100644
--- a/board/sh7785lcr/rtl8169.h
+++ b/board/sh7785lcr/rtl8169.h
@@ -55,4 +55,3 @@ const unsigned short EEPROM_W_Data_8169_B[] = {
 	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
 	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000
 };
-
diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/sh7785lcr/rtl8169_mac.c
index 2bc873bd16..bf0ba145d2 100644
--- a/board/sh7785lcr/rtl8169_mac.c
+++ b/board/sh7785lcr/rtl8169_mac.c
@@ -346,4 +346,3 @@ U_BOOT_CMD(
 	"\n"
 	"    - print MAC address for RTL8110\n"
 );
-
diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c
index 9c228e5f6d..d924595b76 100644
--- a/board/sh7785lcr/selfcheck.c
+++ b/board/sh7785lcr/selfcheck.c
@@ -170,4 +170,3 @@ U_BOOT_CMD(
 	"hwtest sata  - check SiI3512 ID\n"
 	"hwtest pci   - output PCI slot device ID\n"
 );
-
diff --git a/board/sh7785lcr/u-boot.lds b/board/sh7785lcr/u-boot.lds
index 8dcc6c7b1b..231769f3b3 100644
--- a/board/sh7785lcr/u-boot.lds
+++ b/board/sh7785lcr/u-boot.lds
@@ -94,4 +94,3 @@ SECTIONS
 
 	PROVIDE (_end = .);
 }
-
diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c
index e66272ecb9..25adc2832d 100644
--- a/board/sl8245/sl8245.c
+++ b/board/sl8245/sl8245.c
@@ -77,4 +77,3 @@ int board_eth_init(bd_t *bis)
 #endif
 	return rc;
 }
-
diff --git a/board/stxssa/stxssa.c b/board/stxssa/stxssa.c
index 71e9b088ac..4d4dc06e34 100644
--- a/board/stxssa/stxssa.c
+++ b/board/stxssa/stxssa.c
@@ -407,4 +407,3 @@ int board_eth_init(bd_t *bis)
 	cpu_eth_init(bis);	/* Initialize TSECs first */
 	return pci_eth_init(bis);
 }
-