Initial revision

4 files changed, 822 insertions, 0 deletions

diff --git a/board/trab/README.kbd b/board/trab/README.kbd
new file mode 100644
index 0000000000..3db00bccec
--- /dev/null
+++ b/board/trab/README.kbd
@@ -0,0 +1,44 @@
+
+The TRAB keyboard implementation is similar to that for LWMON and
+R360MPI boards. The only difference concerns key naming. There are 4
+keys on TRAB: 1, 2, 3, 4.
+
+1) The "kbd" command provides information about the current state of
+   the keys. For example,
+
+	TRAB # kbd
+	Keys: 1 0 1 0
+
+   means that keys 1 and 3 are pressed. The keyboard status is also
+   stored in the "keybd" environment variable. In this example we get
+
+	keybd=1010
+
+2) The "preboot" variable is set according to current environment
+   settings and keys pressed. This is an example:
+
+	TRAB # setenv magic_keys XY
+	TRAB # setenv key_magicX 12
+	TRAB # setenv key_cmdX echo ## Keys 1 + 2 pressed ##\;echo
+	TRAB # setenv key_magicY 13
+	TRAB # setenv key_cmdY echo ## Keys 1 + 3 pressed ##\;echo
+
+   Here "magic_keys=XY" means that the "key_magicX" and "key_magicY"
+   variables will be checked for a match. Each variable "key_magic*"
+   defines a set of keys. In the our example, if keys 1 and 3 are
+   pressed during reset, then "key_magicY" matches, so the "preboot"
+   variable will be set to the contents of "key_cmdY":
+
+	preboot=echo ## Keys 1 + 3 pressed ##;echo
+
+3) The TRAB board has optional modem support. When a certain key
+   combination is pressed on the keyboard at power-on, the firmware
+   performs the necessary initialization of the modem and allows for
+   dial-in. The key combination is specified in the
+   "include/configs/trab.h" file. For example:
+
+	#define        CONFIG_MODEM_KEY_MAGIC  "23"
+
+   means that modem will be initialized if and only if both keys 2, 3
+   are pressed. Note that the format of this string is similar to the
+   format of "key_magic*" environment variables described above.
diff --git a/board/trab/trab.c b/board/trab/trab.c
new file mode 100644
index 0000000000..3f9b198698
--- /dev/null
+++ b/board/trab/trab.c
@@ -0,0 +1,301 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* #define DEBUG */
+
+#include <common.h>
+#include <cmd_bsp.h>
+#include <malloc.h>
+#include <s3c2400.h>
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int key_pressed(void);
+extern void disable_putc(void);
+extern int do_mdm_init; /* defined in common/main.c */
+
+/*
+ * We need a delay of at least 500 us after turning on the VFD clock
+ * before we can read any useful information for the CPLD controlling
+ * the keyboard switches. Let's play safe and wait 5 ms. The problem
+ * is that timers are not available yet, so we use a manually timed
+ * loop.
+ */
+#define KBD_MDELAY	100000	/* 1000 */
+static void mdelay_no_timer (int msec)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	int i;
+	int delay = msec * 3;
+
+	for (i = 0; i < delay; i ++) gd->bd->bi_arch_number = 145;
+}
+#endif /* CONFIG_MODEM_SUPPORT */
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init ()
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/* memory and cpu-speed are setup before relocation */
+#ifdef CONFIG_TRAB_50MHZ
+	/* change the clock to be 50 MHz 1:1:1 */
+	/* MDIV:0x5c PDIV:4 SDIV:2 */
+	rMPLLCON = 0x5c042;
+	rCLKDIVN = 0;
+#else
+	/* change the clock to be 133 MHz 1:2:4 */
+	/* MDIV:0x7d PDIV:4 SDIV:1 */
+	rMPLLCON = 0x7d041;
+	rCLKDIVN = 3;
+#endif
+
+	/* set up the I/O ports */
+	rPACON = 0x3ffff;
+	rPBCON = 0xaaaaaaaa;
+	rPBUP  = 0xffff;
+	/* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0]	*/
+	/*  00,    10,      10,      10,      10,      10,      10 	*/
+	rPFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
+#ifdef CONFIG_HWFLOW
+	/* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
+	rPFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
+#else
+	/* do not pull up RXD0, RXD1, TXD0, TXD1 */
+	rPFUP  = (1<<0) | (1<<1) | (1<<2) | (1<<3);
+#endif
+	rPGCON = 0x0;
+	rPGUP  = 0x0;
+	rOPENCR= 0x0;
+
+	/* arch number of SAMSUNG-Board */
+	/* MACH_TYPE_SMDK2400 */
+	/* XXX this isn't really correct, but keep it for now */
+	gd->bd->bi_arch_number = 145;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x0c000100;
+
+#ifdef CONFIG_MODEM_SUPPORT
+	/* This stuff is needed to get interrupts on stop-position
+	 * contact events.
+	 * (Copied from the LCD initialization routine.)
+	 */
+	if (rLCDCON1 == 0)
+	{
+		rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA;
+		rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8;
+#if 0
+		rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA;
+#endif
+		rLCDCON2 = 0x000DC000;
+		rLCDCON3 = 0x0051000A;
+		rLCDCON4 = 0x00000001;
+		rLCDCON5 = 0x00000440;
+		rLCDCON1 = 0x00000B75;
+	}
+
+	mdelay_no_timer (KBD_MDELAY);
+
+	if (key_pressed()) {
+		disable_putc();	/* modem doesn't understand banner etc */
+		do_mdm_init = 1;
+	}
+#endif	/* CONFIG_MODEM_SUPPORT */
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Keyboard Controller
+ */
+
+/* Maximum key number */
+#define KEYBD_KEY_NUM		4
+
+#define KBD_DATA	(((*(volatile ulong *)0x04020000) >> 16) & 0xF)
+
+static uchar *key_match (ulong);
+
+int misc_init_r (void)
+{
+	ulong kbd_data = KBD_DATA;
+	uchar keybd_env[KEYBD_KEY_NUM + 1];
+	uchar *str;
+	int i;
+
+	for (i = 0; i < KEYBD_KEY_NUM; ++i) {
+		keybd_env[i] = '0' + ((kbd_data >> i) & 1);
+	}
+	keybd_env[i] = '\0';
+	debug ("** Setting keybd=\"%s\"\n", keybd_env);
+	setenv ("keybd", keybd_env);
+
+	str = strdup (key_match (kbd_data));	/* decode keys */
+
+#ifdef CONFIG_PREBOOT	/* automatically configure "preboot" command on key match */
+	debug ("** Setting preboot=\"%s\"\n", str);
+	setenv ("preboot", str);	/* set or delete definition */
+#endif /* CONFIG_PREBOOT */
+	if (str != NULL) {
+		free (str);
+	}
+
+	return (0);
+}
+
+#ifdef CONFIG_PREBOOT
+
+static uchar kbd_magic_prefix[] = "key_magic";
+static uchar kbd_command_prefix[] = "key_cmd";
+
+static int compare_magic (ulong kbd_data, uchar *str)
+{
+	uchar key_mask;
+
+	debug ("compare_magic: kbd: %04lx  str: \"%s\"\n",kbd_data,str);
+	for (; *str; str++)
+	{
+		uchar c = *str - '1';
+
+		if (c >= KEYBD_KEY_NUM)		/* bad key number */
+			return -1;
+
+		key_mask = 1 << c;
+
+		if (!(kbd_data & key_mask)) {	/* key not pressed */
+			debug ( "compare_magic: "
+				"kbd: %04lx mask: %04lx - key not pressed\n",
+				kbd_data, key_mask );
+			return -1;
+		}
+
+		kbd_data &= ~key_mask;
+	}
+
+	if (kbd_data) {				/* key(s) not released */
+		debug ( "compare_magic: "
+			"kbd: %04lx - key(s) not released\n", kbd_data);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Check if pressed key(s) match magic sequence,
+ * and return the command string associated with that key(s).
+ *
+ * If no key press was decoded, NULL is returned.
+ *
+ * Note: the first character of the argument will be overwritten with
+ * the "magic charcter code" of the decoded key(s), or '\0'.
+ *
+ *
+ * Note: the string points to static environment data and must be
+ * saved before you call any function that modifies the environment.
+ */
+static uchar *key_match (ulong kbd_data)
+{
+	uchar magic[sizeof (kbd_magic_prefix) + 1];
+	uchar cmd_name[sizeof (kbd_command_prefix) + 1];
+	uchar *suffix;
+	uchar *kbd_magic_keys;
+
+	/*
+	 * The following string defines the characters that can pe appended
+	 * to "key_magic" to form the names of environment variables that
+	 * hold "magic" key codes, i. e. such key codes that can cause
+	 * pre-boot actions. If the string is empty (""), then only
+	 * "key_magic" is checked (old behaviour); the string "125" causes
+	 * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
+	 */
+	if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
+		kbd_magic_keys = "";
+
+	debug ("key_match: magic_keys=\"%s\"\n", kbd_magic_keys);
+
+	/* loop over all magic keys;
+	 * use '\0' suffix in case of empty string
+	 */
+	for (suffix=kbd_magic_keys; *suffix || suffix==kbd_magic_keys; ++suffix)
+	{
+		sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
+
+		debug ("key_match: magic=\"%s\"\n",
+			getenv(magic) ? getenv(magic) : "<UNDEFINED>");
+
+		if (compare_magic(kbd_data, getenv(magic)) == 0)
+		{
+			sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
+			debug ("key_match: cmdname %s=\"%s\"\n",
+				cmd_name,
+				getenv (cmd_name) ?
+					getenv (cmd_name) :
+					"<UNDEFINED>");
+			return (getenv (cmd_name));
+		}
+	}
+	debug ("key_match: no match\n");
+	return (NULL);
+}
+#endif							/* CONFIG_PREBOOT */
+
+/* Read Keyboard status */
+int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	ulong kbd_data = KBD_DATA;
+	uchar keybd_env[KEYBD_KEY_NUM + 1];
+	int i;
+
+	puts ("Keys:");
+	for (i = 0; i < KEYBD_KEY_NUM; ++i) {
+		keybd_env[i] = '0' + ((kbd_data >> i) & 1);
+		printf (" %c", keybd_env[i]);
+	}
+	keybd_env[i] = '\0';
+	putc ('\n');
+	setenv ("keybd", keybd_env);
+	return 0;
+}
+
+#ifdef CONFIG_MODEM_SUPPORT
+static int key_pressed(void)
+{
+	return (compare_magic(KBD_DATA, CONFIG_MODEM_KEY_MAGIC) == 0);
+}
+#endif	/* CONFIG_MODEM_SUPPORT */
diff --git a/board/trab/u-boot.lds b/board/trab/u-boot.lds
new file mode 100644
index 0000000000..59834afb83
--- /dev/null
+++ b/board/trab/u-boot.lds
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+        . = 0x00000000;
+
+        . = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm920t/start.o	(.text)
+	  lib_arm/_udivsi3.o	(.text)
+	  lib_arm/_umodsi3.o	(.text)
+	  lib_generic/zlib.o	(.text)
+	  lib_generic/crc32.o	(.text)
+	  lib_generic/string.o	(.text)
+
+	. = env_offset;
+	common/environment.o	(.ppcenv)
+
+	  *(.text)
+	}
+
+        . = ALIGN(4);
+        .rodata : { *(.rodata) }
+
+        . = ALIGN(4);
+        .data : { *(.data) }
+
+        . = ALIGN(4);
+        .got : { *(.got) }
+
+	armboot_end_data = .;
+
+        . = ALIGN(4);
+        .bss : { *(.bss) }
+
+	armboot_end = .;
+}
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
new file mode 100644
index 0000000000..1ea483f0c6
--- /dev/null
+++ b/board/trab/vfd.c
@@ -0,0 +1,414 @@
+/*
+ * (C) Copyright 2001
+ * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************/
+/* ** DEBUG SETTINGS							*/
+/************************************************************************/
+
+/* #define DEBUG	*/
+
+/************************************************************************/
+/* ** HEADER FILES							*/
+/************************************************************************/
+
+#include <config.h>
+#include <common.h>
+#include <version.h>
+#include <stdarg.h>
+#include <linux/types.h>
+#include <devices.h>
+#include <s3c2400.h>
+
+#ifdef CONFIG_VFD
+
+/************************************************************************/
+/* ** CONFIG STUFF -- should be moved to board config file		*/
+/************************************************************************/
+
+/************************************************************************/
+
+#ifndef PAGE_SIZE
+#define	PAGE_SIZE	4096
+#endif
+
+#define ROT	0x09
+#define BLAU	0x0C
+#define VIOLETT	0X0D
+
+ulong vfdbase;
+ulong frame_buf_size;
+#define frame_buf_offs 4
+
+/* taken from armboot/common/vfd.c */
+ulong         adr_vfd_table[112][18][2][4][2];
+unsigned char bit_vfd_table[112][18][2][4][2];
+
+/*
+ * initialize the values for the VFD-grid-control in the framebuffer
+ */
+void init_grid_ctrl(void)
+{
+	ulong adr, grid_cycle;
+	unsigned int bit, display;
+	unsigned char temp, bit_nr;
+
+	for (adr=vfdbase; adr<=(vfdbase+7168); adr+=4) /*clear frame buffer */
+		(*(volatile ulong*)(adr))=0;
+
+	for(display=0;display<=3;display++)
+	{
+		for(grid_cycle=0;grid_cycle<=55;grid_cycle++)
+		{
+			bit = grid_cycle*256*4+(grid_cycle+200)*4+frame_buf_offs+display;
+ 			/* wrap arround if offset (see manual S3C2400) */
+			if (bit>=frame_buf_size*8)
+				bit = bit-(frame_buf_size*8);
+			adr = vfdbase+(bit/32)*4+(3-(bit%32)/8);
+			bit_nr = bit%8;
+			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
+			temp=(*(volatile unsigned char*)(adr));
+			temp|=(1<<bit_nr);
+			(*(volatile unsigned char*)(adr))=temp;
+
+			if(grid_cycle<55)
+				bit = grid_cycle*256*4+(grid_cycle+201)*4+frame_buf_offs+display;
+			else
+				bit = grid_cycle*256*4+200*4+frame_buf_offs+display-4; 	/* grid nr. 0 */
+			/* wrap arround if offset (see manual S3C2400) */
+			if (bit>=frame_buf_size*8)
+				bit = bit-(frame_buf_size*8);
+			adr = vfdbase+(bit/32)*4+(3-(bit%32)/8);
+			bit_nr = bit%8;
+			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
+			temp=(*(volatile unsigned char*)(adr));
+			temp|=(1<<bit_nr);
+			(*(volatile unsigned char*)(adr))=temp;
+		}
+	}
+}
+
+/*
+ *create translation table for getting easy the right position in the
+ *physical framebuffer for some x/y-coordinates of the VFDs
+ */
+void create_vfd_table(void)
+{
+	unsigned int vfd_table[112][18][2][4][2];
+	ulong adr;
+	unsigned int x, y, color, display, entry, pixel, bit_nr;
+
+	/*
+	 * Create translation table for Noritake-T119C-VFD-specific
+	 * organized frame-buffer.
+	 * Created is the number of the bit in the framebuffer (the
+	 * first transferred pixel of each frame is bit 0).
+	 */
+	for(y=0;y<=17;y++)   /* Zeile */
+	{
+		for(x=0;x<=111;x++)  /* Spalten */
+		{
+			/*Display 0 blaue Pixel Eintrag 1 */
+			vfd_table[x][y][0][0][0]=((x%4)*4+y*16+(x/4)*2048);
+			/*Display 0 rote Pixel Eintrag 1 */
+			vfd_table[x][y][1][0][0]=((x%4)*4+y*16+(x/4)*2048+512);
+			if(x<=1)
+			{
+				/*Display 0 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][0][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+1024);
+				/*Display 0 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][0][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+512+1024);
+			}
+			else
+			{
+				/*Display 0 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][0][1]=((x%4)*4+y*16+((x-2)/4)*2048+1024);
+				/*Display 0 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][0][1]=((x%4)*4+y*16+((x-2)/4)*2048+512+1024);
+			}
+			/*Display 1 blaue Pixel Eintrag 1 */
+			vfd_table[x][y][0][1][0]=((x%4)*4+y*16+(x/4)*2048+1);
+			/*Display 1 rote Pixel Eintrag 1 */
+			vfd_table[x][y][1][1][0]=((x%4)*4+y*16+(x/4)*2048+512+1);
+			if(x<=1)
+			{
+				/*Display 1 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][1][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+1+1024);
+				/*Display 1 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][1][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+512+1+1024);
+			}
+			else
+			{
+				/*Display 1 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][1][1]=((x%4)*4+y*16+((x-2)/4)*2048+1+1024);
+				/*Display 1 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][1][1]=((x%4)*4+y*16+((x-2)/4)*2048+512+1+1024);
+			}
+			/*Display 2 blaue Pixel Eintrag 1 */
+			vfd_table[x][y][0][2][0]=((x%4)*4+y*16+(x/4)*2048+2);
+			/*Display 2 rote Pixel Eintrag 1 */
+			vfd_table[x][y][1][2][0]=((x%4)*4+y*16+(x/4)*2048+512+2);
+			if(x<=1)
+			{
+				/*Display 2 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][2][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+2+1024);
+				/*Display 2 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][2][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+512+2+1024);
+			}
+			else
+			{
+				/*Display 2 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][2][1]=((x%4)*4+y*16+((x-2)/4)*2048+2+1024);
+				/*Display 2 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][2][1]=((x%4)*4+y*16+((x-2)/4)*2048+512+2+1024);
+			}
+			/*Display 3 blaue Pixel Eintrag 1 */
+			vfd_table[x][y][0][3][0]=((x%4)*4+y*16+(x/4)*2048+3);
+			/*Display 3 rote Pixel Eintrag 1 */
+			vfd_table[x][y][1][3][0]=((x%4)*4+y*16+(x/4)*2048+512+3);
+			if(x<=1)
+			{
+				/*Display 3 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][3][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+3+1024);
+				/*Display 3 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][3][1]=(((x+112)%4)*4+y*16+((x+110)/4)*2048+512+3+1024);
+			}
+			else
+			{
+				/*Display 3 blaue Pixel Eintrag 2 */
+				vfd_table[x][y][0][3][1]=((x%4)*4+y*16+((x-2)/4)*2048+3+1024);
+				/*Display 3 rote Pixel Eintrag 2 */
+				vfd_table[x][y][1][3][1]=((x%4)*4+y*16+((x-2)/4)*2048+512+3+1024);
+			}
+		}
+	}
+
+	/*
+	 * Create translation table for Noritake-T119C-VFD-specific
+	 * organized frame-buffer
+	 * Create table with entries for physical byte adresses and
+	 * bit-number within the byte
+	 * from table with bit-numbers within the total framebuffer
+	 */
+	for(y=0;y<=17;y++)
+	{
+		for(x=0;x<=111;x++)
+		{
+			for(color=0;color<=1;color++)
+			{
+				for(display=0;display<=3;display++)
+				{
+					for(entry=0;entry<=1;entry++)
+					{
+						pixel  = vfd_table[x][y][color][display][entry] + frame_buf_offs;
+						 /*
+						  * wrap arround if offset
+						  * (see manual S3C2400)
+						  */
+						if (pixel>=frame_buf_size*8)
+							pixel = pixel-(frame_buf_size*8);
+						adr    = vfdbase+(pixel/32)*4+(3-(pixel%32)/8);
+						bit_nr = pixel%8;
+						bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
+						adr_vfd_table[x][y][color][display][entry] = adr;
+						bit_vfd_table[x][y][color][display][entry] = bit_nr;
+					}
+				}
+			}
+		}
+	}
+}
+
+/*
+ * Set/clear pixel of the VFDs
+ */
+void set_vfd_pixel(unsigned char x, unsigned char y, unsigned char color, unsigned char display, unsigned char value)
+{
+	ulong adr;
+	unsigned char bit_nr, temp;
+
+	if (value!=0)
+	{
+		/* Pixel-Eintrag Nr. 1 */
+		adr = adr_vfd_table[x][y][color][display][0];
+		/* Pixel-Eintrag Nr. 1 */
+		bit_nr = bit_vfd_table[x][y][color][display][0];
+		temp=(*(volatile unsigned char*)(adr));
+		temp|=1<<bit_nr;
+		(*(volatile unsigned char*)(adr))=temp;
+
+		/* Pixel-Eintrag Nr. 2 */
+		adr = adr_vfd_table[x][y][color][display][1];
+		/* Pixel-Eintrag Nr. 2 */
+		bit_nr = bit_vfd_table[x][y][color][display][1];
+		temp=(*(volatile unsigned char*)(adr));
+		temp|=1<<bit_nr;
+		(*(volatile unsigned char*)(adr))=temp;
+	}
+	else
+	{
+		/* Pixel-Eintrag Nr. 1 */
+		adr = adr_vfd_table[x][y][color][display][0];
+		/* Pixel-Eintrag Nr. 1 */
+		bit_nr = bit_vfd_table[x][y][color][display][0];
+		temp=(*(volatile unsigned char*)(adr));
+		temp&=~(1<<bit_nr);
+		(*(volatile unsigned char*)(adr))=temp;
+
+		/* Pixel-Eintrag Nr. 2 */
+		adr = adr_vfd_table[x][y][color][display][1];
+		/* Pixel-Eintrag Nr. 2 */
+		bit_nr = bit_vfd_table[x][y][color][display][1];
+		temp=(*(volatile unsigned char*)(adr));
+		temp&=~(1<<bit_nr);
+		(*(volatile unsigned char*)(adr))=temp;
+	}
+}
+
+/*
+ * transfer image from BMP-File
+ */
+void transfer_pic(int display, unsigned char *adr, int height, int width)
+{
+	int x, y;
+	unsigned char temp;
+
+	for (; height > 0; height -= 18)
+	{
+		if (height > 18)
+			y = 18;
+		else
+			y = height;
+		for (; y > 0; y--)
+		{
+			for (x = 0; x < width; x += 2)
+			{
+				temp = *adr++;
+				set_vfd_pixel(x, y-1, 0, display, 0);
+				set_vfd_pixel(x, y-1, 1, display, 0);
+				if ((temp >> 4) == BLAU)
+					set_vfd_pixel(x, y-1, 0, display, 1);
+				else if ((temp >> 4) == ROT)
+					set_vfd_pixel(x, y-1, 1, display, 1);
+				else if ((temp >> 4) == VIOLETT)
+				{
+					set_vfd_pixel(x, y-1, 0, display, 1);
+					set_vfd_pixel(x, y-1, 1, display, 1);
+				}
+				set_vfd_pixel(x+1, y-1, 0, display, 0);
+				set_vfd_pixel(x+1, y-1, 1, display, 0);
+				if ((temp & 0x0F) == BLAU)
+					set_vfd_pixel(x+1, y-1, 0, display, 1);
+				else if ((temp & 0x0F) == ROT)
+					set_vfd_pixel(x+1, y-1, 1, display, 1);
+				else if ((temp & 0x0F) == VIOLETT)
+				{
+					set_vfd_pixel(x+1, y-1, 0, display, 1);
+					set_vfd_pixel(x+1, y-1, 1, display, 1);
+				}
+			}
+		}
+		display++;
+		if (display > 3)
+			display = 0;
+	}
+}
+
+/*
+ * initialize LCD-Controller of the S3C2400 for using VFDs
+ */
+int drv_vfd_init(void)
+{
+	ulong palette;
+
+	DECLARE_GLOBAL_DATA_PTR;
+
+	vfdbase = gd->fb_base;
+	create_vfd_table();
+	init_grid_ctrl();
+
+	/*
+	 * Hinweis: Der Framebuffer ist um genau ein Nibble verschoben
+	 * Das erste angezeigte Pixel wird aus dem zweiten Nibble geholt
+	 * das letzte angezeigte Pixel wird aus dem ersten Nibble geholt
+	 * (wrap around)
+	 * see manual S3C2400
+	 */
+	/* frame buffer startadr */
+	rLCDSADDR1 = vfdbase >> 1;
+ 	/* frame buffer endadr */
+	rLCDSADDR2 = (vfdbase + frame_buf_size) >> 1;
+	rLCDSADDR3 = ((256/4));
+
+	/* Port-Pins als LCD-Ausgang */
+	rPCCON =   (rPCCON & 0xFFFFFF00)| 0x000000AA;
+	/* Port-Pins als LCD-Ausgang */
+	rPDCON =   (rPDCON & 0xFFFFFF03)| 0x000000A8;
+#ifdef WITH_VFRAME
+	/* mit VFRAME zum Messen */
+	rPDCON =   (rPDCON & 0xFFFFFF00)| 0x000000AA;
+#endif
+
+	rLCDCON2 = 0x000DC000;
+	rLCDCON3 = 0x0051000A;
+	rLCDCON4 = 0x00000001;
+	rLCDCON5 = 0x00000440;
+	rLCDCON1 = 0x00000B75;
+
+	debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
+	debug ("LCDSADDR2: %lX\n", rLCDSADDR2);
+	debug ("LCDSADDR3: %lX\n", rLCDSADDR3);
+
+	for(palette=0;palette<=15;palette++)
+		(*(volatile unsigned int*)(PALETTE+(palette*4)))=palette;
+	for(palette=16;palette<=255;palette++)
+		(*(volatile unsigned int*)(PALETTE+(palette*4)))=0x00;
+
+	return 0;
+}
+
+/************************************************************************/
+/* ** ROM capable initialization part - needed to reserve FB memory	*/
+/************************************************************************/
+
+/*
+ * This is called early in the system initialization to grab memory
+ * for the VFD controller.
+ *
+ * Note that this is running from ROM, so no write access to global data.
+ */
+ulong vfd_setmem (ulong addr)
+{
+	ulong size;
+
+	/* MAGIC */
+	frame_buf_size = (256*4*56)/8;
+
+	/* Round up to nearest full page */
+	size = (frame_buf_size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+
+	debug ("Reserving %ldk for VFD Framebuffer at: %08lx\n", size>>10, addr);
+
+	return (size);
+}
+
+#endif /* CONFIG_VFD */