rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

6 files changed, 34 insertions, 34 deletions

diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 71a3b87acf..be709bf81e 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -39,7 +39,7 @@ int dram_init(void)
 
 static int dv_get_pllm_output(uint32_t pllm)
 {
-	return (pllm + 1) * (CFG_HZ_CLOCK / 1000000);
+	return (pllm + 1) * (CONFIG_SYS_HZ_CLOCK / 1000000);
 }
 
 void dv_display_clk_infos(void)
@@ -54,9 +54,9 @@ void dv_display_clk_infos(void)
  */
 int dvevm_read_mac_address(uint8_t *buf)
 {
-#ifdef CFG_I2C_EEPROM_ADDR
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
 	/* Read MAC address. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7F00, CFG_I2C_EEPROM_ADDR_LEN,
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
 		     (uint8_t *) &buf[0], 6))
 		goto i2cerr;
 
@@ -67,9 +67,9 @@ int dvevm_read_mac_address(uint8_t *buf)
 	return 1; /* Found */
 
 i2cerr:
-	printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+	printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
 err:
-#endif /* CFG_I2C_EEPROM_ADDR */
+#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
 
 	return 0;
 }
diff --git a/board/davinci/common/psc.c b/board/davinci/common/psc.c
index 00dc07c3f6..d538d51f2a 100644
--- a/board/davinci/common/psc.c
+++ b/board/davinci/common/psc.c
@@ -81,7 +81,7 @@ void lpsc_on(unsigned int id)
 }
 
 /* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 void dsp_on(void)
 {
 	int i;
@@ -114,4 +114,4 @@ void dsp_on(void)
 
 	REG(PSC_GBLCTL) &= ~0x1f;
 }
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 151f8a9007..abf60b35b0 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -53,10 +53,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
diff --git a/board/davinci/schmoogie/schmoogie.c b/board/davinci/schmoogie/schmoogie.c
index 99fd32629f..3504a2ec19 100644
--- a/board/davinci/schmoogie/schmoogie.c
+++ b/board/davinci/schmoogie/schmoogie.c
@@ -53,10 +53,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -125,13 +125,13 @@ int misc_init_r(void)
 	dv_display_clk_infos();
 
 	/* Set serial number from UID chip */
-	if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) {
-		printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+	if (i2c_read(CONFIG_SYS_UID_ADDR, 0, 1, buf, 8)) {
+		printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
 		forceenv("serial#", "FAILED");
 	} else {
 		if (buf[0] != 0x70) {
 			/* Device Family Code */
-			printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+			printf("\nUID @ 0x%02x read FAILED!!!\n", CONFIG_SYS_UID_ADDR);
 			forceenv("serial#", "FAILED");
 		}
 	}
@@ -141,7 +141,7 @@ int misc_init_r(void)
 		tmp[0] = crc_tbl[tmp[0] ^ buf[i]];
 
 	if (tmp[0] != 0) {
-		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CFG_UID_ADDR);
+		printf("\nUID @ 0x%02x - BAD CRC!!!\n", CONFIG_SYS_UID_ADDR);
 		forceenv("serial#", "FAILED");
 	} else {
 		/* CRC OK, set "serial" env variable */
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index 6e878eb572..9296d7b634 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -63,10 +63,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;
@@ -99,35 +99,35 @@ static int sffsdr_read_mac_address(uint8_t *buf)
 	u_int32_t value, mac[2], address;
 
 	/* Read Integrity data structure checkword. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_CHECKWORD_OFFSET,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	if (value != INTEGRITY_CHECKWORD_VALUE)
 		return 0;
 
 	/* Read SYSCFG structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + (int) value; /* Address of SYSCFG structure. */
 
 	/* Read NET CONFIG structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + (int) value; /* Address of NET CONFIG structure. */
 	address += 12; /* Address of NET INTERFACE CONFIG structure. */
 
 	/* Read NET INTERFACE CONFIG 2 structure offset. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4))
 		goto err;
 	address = 0x800 + 16 + (int) value;	/* Address of NET INTERFACE
 						 * CONFIG 2 structure. */
 
 	/* Read MAC address. */
-	if (i2c_read(CFG_I2C_EEPROM_ADDR, address,
-		     CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, address,
+		     CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &mac[0], 8))
 		goto err;
 
 	buf[0] = mac[0] >> 24;
@@ -140,7 +140,7 @@ static int sffsdr_read_mac_address(uint8_t *buf)
 	return 1; /* Found */
 
 err:
-	printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR);
+	printf("Read from EEPROM @ 0x%02x failed\n", CONFIG_SYS_I2C_EEPROM_ADDR);
 	return 0;
 }
 
@@ -156,10 +156,10 @@ int misc_init_r(void)
 	dv_display_clk_infos();
 
 	/* Configure I2C switch (PCA9543) to enable channel 0. */
-	i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0;
-	if (i2c_write(CFG_I2C_PCA9543_ADDR, 0,
-		      CFG_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
-		printf("Write to MUX @ 0x%02x failed\n", CFG_I2C_PCA9543_ADDR);
+	i2cbuf = CONFIG_SYS_I2C_PCA9543_ENABLE_CH0;
+	if (i2c_write(CONFIG_SYS_I2C_PCA9543_ADDR, 0,
+		      CONFIG_SYS_I2C_PCA9543_ADDR_LEN, &i2cbuf, 1)) {
+		printf("Write to MUX @ 0x%02x failed\n", CONFIG_SYS_I2C_PCA9543_ADDR);
 		return 1;
 	}
 
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index a6fe82593a..6de9356c74 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -52,10 +52,10 @@ int board_init(void)
 	lpsc_on(DAVINCI_LPSC_TIMER1);
 	lpsc_on(DAVINCI_LPSC_GPIO);
 
-#if !defined(CFG_USE_DSPLINK)
+#if !defined(CONFIG_SYS_USE_DSPLINK)
 	/* Powerup the DSP */
 	dsp_on();
-#endif /* CFG_USE_DSPLINK */
+#endif /* CONFIG_SYS_USE_DSPLINK */
 
 	/* Bringup UART0 out of reset */
 	REG(UART0_PWREMU_MGMT) = 0x0000e003;