diff options
| author | Sedji Gaouaou <sedji.gaouaou@atmel.com> | 2009-06-25 17:04:15 +0200 |
|---|---|---|
| committer | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2009-07-12 17:56:11 +0200 |
| commit | 5ccc2d99d61c81805348b0cd9f79731b271f7daf (patch) | |
| tree | dfde19180c8d8af8ec146358ef76698e5b0e1534 /board/atmel | |
| parent | 22ee647380c42f44528f99b7c1b423725e542102 (diff) | |
| download | u-boot-midas-5ccc2d99d61c81805348b0cd9f79731b271f7daf.tar.gz u-boot-midas-5ccc2d99d61c81805348b0cd9f79731b271f7daf.tar.bz2 u-boot-midas-5ccc2d99d61c81805348b0cd9f79731b271f7daf.zip | |
at91: Introduction of at91sam9g10 SOC.
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Diffstat (limited to 'board/atmel')
| -rw-r--r-- | board/atmel/at91sam9261ek/at91sam9261ek.c | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 0817e60154..2f6b599a6b 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -57,6 +57,16 @@ static void at91sam9261ek_nand_hw_init(void) csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); /* Configure SMC CS3 for NAND/SmartMedia */ +#ifdef CONFIG_AT91SAM9G10EK + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(7) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(7)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); +#else at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); @@ -65,6 +75,7 @@ static void at91sam9261ek_nand_hw_init(void) AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); +#endif at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | @@ -92,6 +103,21 @@ static void at91sam9261ek_nand_hw_init(void) static void at91sam9261ek_dm9000_hw_init(void) { /* Configure SMC CS2 for DM9000 */ +#ifdef CONFIG_AT91SAM9G10EK + at91_sys_write(AT91_SMC_SETUP(2), + AT91_SMC_NWESETUP_(3) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(3) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(2), + AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(8) | + AT91_SMC_NRDPULSE_(6) | AT91_SMC_NCS_RDPULSE_(8)); + at91_sys_write(AT91_SMC_CYCLE(2), + AT91_SMC_NWECYCLE_(20) | AT91_SMC_NRDCYCLE_(20)); + at91_sys_write(AT91_SMC_MODE(2), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | + AT91_SMC_TDF_(1)); +#else at91_sys_write(AT91_SMC_SETUP(2), AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); @@ -105,6 +131,7 @@ static void at91sam9261ek_dm9000_hw_init(void) AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); +#endif /* Configure Reset signal as output */ at91_set_gpio_output(AT91_PIN_PC10, 0); @@ -169,7 +196,11 @@ static void at91sam9261ek_lcd_hw_init(void) at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); +#ifdef CONFIG_AT91SAM9G10EK + gd->fb_base = CONFIG_AT91SAM9G10_LCD_BASE; +#else gd->fb_base = AT91SAM9261_SRAM_BASE; +#endif } #ifdef CONFIG_LCD_INFO @@ -207,8 +238,13 @@ int board_init(void) /* Enable Ctrlc */ console_init_f(); +#ifdef CONFIG_AT91SAM9G10EK + /* arch number of AT91SAM9G10EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G10EK; +#else /* arch number of AT91SAM9261EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; |