Add support for NetSilicon NS7520 processor.

Patch by Art Shipkowski, 12 May 2005

Cleanup.

1 files changed, 566 insertions, 528 deletions

diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c
index fe395ccb86..f0481553f0 100644
--- a/board/amirix/ap1000/powerspan.c
+++ b/board/amirix/ap1000/powerspan.c
@@ -38,467 +38,492 @@
   * @param  addr [IN] the address to write to
   * @param  val  [IN] the value to write
   */
-void write1(unsigned long addr, unsigned char val) {
-    volatile unsigned char* p = (volatile unsigned char*)addr;
+void write1 (unsigned long addr, unsigned char val)
+{
+	volatile unsigned char *p = (volatile unsigned char *) addr;
+
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write1: addr=%08x val=%02x\n", addr, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("write1: addr=%08x val=%02x\n", addr, val);
+	}
 #endif
-    *p = val;
-    PSII_SYNC();
+	*p = val;
+	PSII_SYNC ();
 }
 
 /** Read one byte with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned char read1(unsigned long addr) {
-    unsigned char val;
-    volatile unsigned char* p = (volatile unsigned char*)addr;
+unsigned char read1 (unsigned long addr)
+{
+	unsigned char val;
+	volatile unsigned char *p = (volatile unsigned char *) addr;
 
-    val = *p;
-    PSII_SYNC();
+	val = *p;
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read1: addr=%08x val=%02x\n", addr, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read1: addr=%08x val=%02x\n", addr, val);
+	}
 #endif
-    return val;
+	return val;
 }
 
 /** Write one 2-byte word with byte swapping.
   * @param  addr  [IN] the address to write to
   * @param  val   [IN] the value to write
   */
-void write2(unsigned long addr, unsigned short val) {
-    volatile unsigned short* p = (volatile unsigned short*)addr;
+void write2 (unsigned long addr, unsigned short val)
+{
+	volatile unsigned short *p = (volatile unsigned short *) addr;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val,
-                ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
-        }
+	if (gVerbosityLevel > 1) {
+		printf ("write2: addr=%08x val=%04x -> *p=%04x\n", addr, val,
+			((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8));
+	}
 #endif
-    *p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    PSII_SYNC();
+	*p = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	PSII_SYNC ();
 }
 
 /** Read one 2-byte word with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned short read2(unsigned long addr) {
-    unsigned short val;
-    volatile unsigned short* p = (volatile unsigned short*)addr;
-
-    val = *p;
-    val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
-    PSII_SYNC();
+unsigned short read2 (unsigned long addr)
+{
+	unsigned short val;
+	volatile unsigned short *p = (volatile unsigned short *) addr;
+
+	val = *p;
+	val = ((val & 0xFF00) >> 8) | ((val & 0x00FF) << 8);
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read2: addr=%08x *p=%04x -> val=%04x\n", addr, *p,
+			val);
+	}
 #endif
-    return val;
+	return val;
 }
 
 /** Write one 4-byte word with byte swapping.
   * @param  addr  [IN] the address to write to
   * @param  val   [IN] the value to write
   */
-void write4(unsigned long addr, unsigned long val) {
-    volatile unsigned long* p = (volatile unsigned long*)addr;
+void write4 (unsigned long addr, unsigned long val)
+{
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val,
-            ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-            ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8));
-        }
+	if (gVerbosityLevel > 1) {
+		printf ("write4: addr=%08x val=%08x -> *p=%08x\n", addr, val,
+			((val & 0xFF000000) >> 24) |
+			((val & 0x000000FF) << 24) |
+			((val & 0x00FF0000) >>  8) |
+			((val & 0x0000FF00) <<  8));
+	}
 #endif
-    *p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-         ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    PSII_SYNC();
+	*p = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	PSII_SYNC ();
 }
 
 /** Read one 4-byte word with byte swapping.
   * @param  addr  [IN] the address to read from
   * @return the value at addr
   */
-unsigned long read4(unsigned long addr) {
-    unsigned long val;
-    volatile unsigned long* p = (volatile unsigned long*)addr;
-
-    val = *p;
-    val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
-          ((val & 0x00FF0000) >> 8)  | ((val & 0x0000FF00) << 8);
-    PSII_SYNC();
+unsigned long read4 (unsigned long addr)
+{
+	unsigned long val;
+	volatile unsigned long *p = (volatile unsigned long *) addr;
+
+	val = *p;
+	val = ((val & 0xFF000000) >> 24) | ((val & 0x000000FF) << 24) |
+		((val & 0x00FF0000) >> 8) | ((val & 0x0000FF00) << 8);
+	PSII_SYNC ();
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p, val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("read4: addr=%08x *p=%08x -> val=%08x\n", addr, *p,
+			val);
+	}
 #endif
-    return val;
+	return val;
 }
 
-int PCIReadConfig(int bus, int dev, int fn, int reg, int width, unsigned long* val){
-    unsigned int conAdrVal;
-    unsigned int conDataReg = REG_CONFIG_DATA;
-    unsigned int status;
-    int ret_val = 0;
-
-
-    /* DEST bit hardcoded to 1: local pci is PCI-2 */
-    /* TYPE bit is hardcoded to 1: all config cycles are local */
-    conAdrVal = (1 << 24)
-              | ((bus & 0xFF) << 16)
-              | ((dev & 0xFF) << 11)
-              | ((fn & 0x07)  <<  8)
-              | (reg & 0xFC);
-
-    /* clear any pending master aborts */
-    write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-
-    /* Load the conAdrVal value first, then read from pb_conf_data */
-    write4(REG_CONFIG_ADDRESS, conAdrVal);
-    PSII_SYNC();
-
-
-    /* Note: documentation does not match the pspan library code */
-    /* Note: *pData comes back as -1 if device is not present */
-    switch (width){
-        case 4:{
-          *(unsigned int*)val = read4(conDataReg);
-          break;
-        }
-        case 2:{
-          *(unsigned short*)val = read2(conDataReg);
-          break;
-        }
-        case 1:{
-          *(unsigned char*)val = read1(conDataReg);
-          break;
-        }
-        default:{
-          ret_val = ILLEGAL_REG_OFFSET;
-          break;
-        }
-    }
-    PSII_SYNC();
-
-    /* clear any pending master aborts */
-    status = read4(REG_P1_CSR);
-    if(status & CLEAR_MASTER_ABORT){
-        ret_val = NO_DEVICE_FOUND;
-        write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-    }
-
-    return ret_val;
+int PCIReadConfig (int bus, int dev, int fn, int reg, int width,
+		   unsigned long *val)
+{
+	unsigned int conAdrVal;
+	unsigned int conDataReg = REG_CONFIG_DATA;
+	unsigned int status;
+	int ret_val = 0;
+
+
+	/* DEST bit hardcoded to 1: local pci is PCI-2 */
+	/* TYPE bit is hardcoded to 1: all config cycles are local */
+	conAdrVal = (1 << 24)
+		| ((bus & 0xFF) << 16)
+		| ((dev & 0xFF) << 11)
+		| ((fn & 0x07) << 8)
+		| (reg & 0xFC);
+
+	/* clear any pending master aborts */
+	write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+
+	/* Load the conAdrVal value first, then read from pb_conf_data */
+	write4 (REG_CONFIG_ADDRESS, conAdrVal);
+	PSII_SYNC ();
+
+
+	/* Note: documentation does not match the pspan library code */
+	/* Note: *pData comes back as -1 if device is not present */
+	switch (width) {
+	case 4:
+		*(unsigned int *) val = read4 (conDataReg);
+		break;
+	case 2:
+		*(unsigned short *) val = read2 (conDataReg);
+		break;
+	case 1:
+		*(unsigned char *) val = read1 (conDataReg);
+		break;
+	default:
+		ret_val = ILLEGAL_REG_OFFSET;
+		break;
+	}
+	PSII_SYNC ();
+
+	/* clear any pending master aborts */
+	status = read4 (REG_P1_CSR);
+	if (status & CLEAR_MASTER_ABORT) {
+		ret_val = NO_DEVICE_FOUND;
+		write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+	}
+
+	return ret_val;
 }
 
 
-int PCIWriteConfig(int bus, int dev, int fn, int reg, int width, unsigned long val){
-    unsigned int conAdrVal;
-    unsigned int conDataReg = REG_CONFIG_DATA;
-    unsigned int status;
-    int ret_val = 0;
-
-
-    /* DEST bit hardcoded to 1: local pci is PCI-2 */
-    /* TYPE bit is hardcoded to 1: all config cycles are local */
-    conAdrVal = (1 << 24)
-              | ((bus & 0xFF) << 16)
-              | ((dev & 0xFF) << 11)
-              | ((fn & 0x07)  <<  8)
-              | (reg & 0xFC);
-
-    /* clear any pending master aborts */
-    write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-
-    /* Load the conAdrVal value first, then read from pb_conf_data */
-    write4(REG_CONFIG_ADDRESS, conAdrVal);
-    PSII_SYNC();
-
-
-    /* Note: documentation does not match the pspan library code */
-    /* Note: *pData comes back as -1 if device is not present */
-    switch (width){
-        case 4:{
-          write4(conDataReg, val);
-          break;
-        }
-        case 2:{
-          write2(conDataReg, val);
-          break;
-        }
-        case 1:{
-          write1(conDataReg, val);
-          break;
-        }
-        default:{
-          ret_val = ILLEGAL_REG_OFFSET;
-          break;
-        }
-    }
-    PSII_SYNC();
-
-    /* clear any pending master aborts */
-    status = read4(REG_P1_CSR);
-    if(status & CLEAR_MASTER_ABORT){
-        ret_val = NO_DEVICE_FOUND;
-        write4(REG_P1_CSR, CLEAR_MASTER_ABORT);
-    }
-
-    return ret_val;
+int PCIWriteConfig (int bus, int dev, int fn, int reg, int width,
+		    unsigned long val)
+{
+	unsigned int conAdrVal;
+	unsigned int conDataReg = REG_CONFIG_DATA;
+	unsigned int status;
+	int ret_val = 0;
+
+
+	/* DEST bit hardcoded to 1: local pci is PCI-2 */
+	/* TYPE bit is hardcoded to 1: all config cycles are local */
+	conAdrVal = (1 << 24)
+		| ((bus & 0xFF) << 16)
+		| ((dev & 0xFF) << 11)
+		| ((fn & 0x07) << 8)
+		| (reg & 0xFC);
+
+	/* clear any pending master aborts */
+	write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+
+	/* Load the conAdrVal value first, then read from pb_conf_data */
+	write4 (REG_CONFIG_ADDRESS, conAdrVal);
+	PSII_SYNC ();
+
+
+	/* Note: documentation does not match the pspan library code */
+	/* Note: *pData comes back as -1 if device is not present */
+	switch (width) {
+	case 4:
+		write4 (conDataReg, val);
+		break;
+	case 2:
+		write2 (conDataReg, val);
+		break;
+	case 1:
+		write1 (conDataReg, val);
+		break;
+	default:
+		ret_val = ILLEGAL_REG_OFFSET;
+		break;
+	}
+	PSII_SYNC ();
+
+	/* clear any pending master aborts */
+	status = read4 (REG_P1_CSR);
+	if (status & CLEAR_MASTER_ABORT) {
+		ret_val = NO_DEVICE_FOUND;
+		write4 (REG_P1_CSR, CLEAR_MASTER_ABORT);
+	}
+
+	return ret_val;
 }
 
 
-int pci_read_config_byte(int bus, int dev, int fn, int reg, unsigned char* val){
-    unsigned long read_val;
-    int ret_val;
+int pci_read_config_byte (int bus, int dev, int fn, int reg,
+			  unsigned char *val)
+{
+	unsigned long read_val;
+	int ret_val;
 
-    ret_val = PCIReadConfig(bus, dev, fn, reg, 1, &read_val);
-    *val = read_val & 0xFF;
+	ret_val = PCIReadConfig (bus, dev, fn, reg, 1, &read_val);
+	*val = read_val & 0xFF;
 
-    return ret_val;
+	return ret_val;
 }
 
-int pci_write_config_byte(int bus, int dev, int fn, int reg, unsigned char val){
-    return PCIWriteConfig(bus, dev, fn, reg, 1, val);
+int pci_write_config_byte (int bus, int dev, int fn, int reg,
+			   unsigned char val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 1, val);
 }
 
-int pci_read_config_word(int bus, int dev, int fn, int reg, unsigned short* val){
-    unsigned long read_val;
-    int ret_val;
+int pci_read_config_word (int bus, int dev, int fn, int reg,
+			  unsigned short *val)
+{
+	unsigned long read_val;
+	int ret_val;
 
-    ret_val = PCIReadConfig(bus, dev, fn, reg, 2, &read_val);
-    *val = read_val & 0xFFFF;
+	ret_val = PCIReadConfig (bus, dev, fn, reg, 2, &read_val);
+	*val = read_val & 0xFFFF;
 
-    return ret_val;
+	return ret_val;
 }
 
-int pci_write_config_word(int bus, int dev, int fn, int reg, unsigned short val){
-    return PCIWriteConfig(bus, dev, fn, reg, 2, val);
+int pci_write_config_word (int bus, int dev, int fn, int reg,
+			   unsigned short val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 2, val);
 }
 
-int pci_read_config_dword(int bus, int dev, int fn, int reg, unsigned long* val){
-    return PCIReadConfig(bus, dev, fn, reg, 4, val);
+int pci_read_config_dword (int bus, int dev, int fn, int reg,
+			   unsigned long *val)
+{
+	return PCIReadConfig (bus, dev, fn, reg, 4, val);
 }
 
-int pci_write_config_dword(int bus, int dev, int fn, int reg, unsigned long val){
-    return PCIWriteConfig(bus, dev, fn, reg, 4, val);
+int pci_write_config_dword (int bus, int dev, int fn, int reg,
+			    unsigned long val)
+{
+	return PCIWriteConfig (bus, dev, fn, reg, 4, val);
 }
 
 #endif /* INCLUDE_PCI */
 
-int I2CAccess(unsigned char theI2CAddress, unsigned char theDevCode, unsigned char theChipSel, unsigned char* theValue, int RWFlag){
-    int ret_val = 0;
-    unsigned int reg_value;
-
-    reg_value = PowerSpanRead(REG_I2C_CSR);
-
-    if(reg_value & I2C_CSR_ACT){
-        printf("Error: I2C busy\n");
-        ret_val = I2C_BUSY;
-    }
-    else{
-        reg_value = ((theI2CAddress & 0xFF) << 24)
-                  | ((theDevCode & 0x0F) << 12)
-                  | ((theChipSel & 0x07) << 9)
-                  | I2C_CSR_ERR;
-        if(RWFlag == I2C_WRITE){
-            reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16);
-        }
-
-        PowerSpanWrite(REG_I2C_CSR, reg_value);
-        udelay(1);
-
-        do{
-            reg_value = PowerSpanRead(REG_I2C_CSR);
-
-            if((reg_value & I2C_CSR_ACT) == 0){
-                if(reg_value & I2C_CSR_ERR){
-                    ret_val = I2C_ERR;
-                }
-                else{
-                    *theValue = (reg_value & I2C_CSR_DATA) >> 16;
-                }
-            }
-        } while(reg_value & I2C_CSR_ACT);
-    }
-
-    return ret_val;
+int I2CAccess (unsigned char theI2CAddress, unsigned char theDevCode,
+	       unsigned char theChipSel, unsigned char *theValue, int RWFlag)
+{
+	int ret_val = 0;
+	unsigned int reg_value;
+
+	reg_value = PowerSpanRead (REG_I2C_CSR);
+
+	if (reg_value & I2C_CSR_ACT) {
+		printf ("Error: I2C busy\n");
+		ret_val = I2C_BUSY;
+	} else {
+		reg_value = ((theI2CAddress & 0xFF) << 24)
+			| ((theDevCode & 0x0F) << 12)
+			| ((theChipSel & 0x07) << 9)
+			| I2C_CSR_ERR;
+		if (RWFlag == I2C_WRITE) {
+			reg_value |= I2C_CSR_RW | ((*theValue & 0xFF) << 16);
+		}
+
+		PowerSpanWrite (REG_I2C_CSR, reg_value);
+		udelay (1);
+
+		do {
+			reg_value = PowerSpanRead (REG_I2C_CSR);
+
+			if ((reg_value & I2C_CSR_ACT) == 0) {
+				if (reg_value & I2C_CSR_ERR) {
+					ret_val = I2C_ERR;
+				} else {
+					*theValue =
+						(reg_value & I2C_CSR_DATA) >>
+						16;
+				}
+			}
+		} while (reg_value & I2C_CSR_ACT);
+	}
+
+	return ret_val;
 }
 
-int EEPROMRead(unsigned char theI2CAddress, unsigned char* theValue){
-    return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, theValue, I2C_READ);
+int EEPROMRead (unsigned char theI2CAddress, unsigned char *theValue)
+{
+	return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL,
+			  theValue, I2C_READ);
 }
 
-int EEPROMWrite(unsigned char theI2CAddress, unsigned char theValue){
-    return I2CAccess(theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL, &theValue, I2C_WRITE);
+int EEPROMWrite (unsigned char theI2CAddress, unsigned char theValue)
+{
+	return I2CAccess (theI2CAddress, I2C_EEPROM_DEV, I2C_EEPROM_CHIP_SEL,
+			  &theValue, I2C_WRITE);
 }
 
-int do_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    char cmd;
-    int ret_val = 0;
-    unsigned int address = 0;
-    unsigned char value = 1;
-    unsigned char read_value;
-    int ii;
-    int error = 0;
-    unsigned char* mem_ptr;
-    unsigned char default_eeprom[] = EEPROM_DEFAULT;
-
-    if(argc < 2){
-        goto usage;
-    }
-
-    cmd = argv[1][0];
-    if(argc > 2){
-        address = simple_strtoul(argv[2], NULL, 16);
-        if(argc > 3){
-            value = simple_strtoul(argv[3], NULL, 16) & 0xFF;
-        }
-    }
-
-    switch (cmd){
-        case 'r':{
-            if(address > 256){
-                printf("Illegal Address\n");
-                goto usage;
-            }
-            printf("@0x%x: ", address);
-            for(ii = 0;ii < value;ii++){
-                if(EEPROMRead(address + ii, &read_value) != 0){
-                    printf("Read Error\n");
-                }
-                else{
-                    printf("0x%02x ", read_value);
-                }
-
-                if(((ii + 1) % 16) == 0){
-                    printf("\n");
-                }
-            }
-            printf("\n");
-            break;
-        }
-        case 'w':{
-            if(address > 256){
-                printf("Illegal Address\n");
-                goto usage;
-            }
-            if(argc < 4){
-                goto usage;
-            }
-            if(EEPROMWrite(address, value) != 0){
-                printf("Write Error\n");
-            }
-            break;
-        }
-        case 'g':{
-            if(argc != 3){
-                goto usage;
-            }
-            mem_ptr = (unsigned char*)address;
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMRead(ii, &read_value) != 0){
-                    printf("Read Error\n");
-                    error = 1;
-                }
-                else{
-                    *mem_ptr = read_value;
-                    mem_ptr++;
-                }
-            }
-            break;
-        }
-        case 'p':{
-            if(argc != 3){
-                goto usage;
-            }
-            mem_ptr = (unsigned char*)address;
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMWrite(ii, *mem_ptr) != 0){
-                    printf("Write Error\n");
-                    error = 1;
-                }
-
-                mem_ptr++;
-            }
-            break;
-        }
-        case 'd':{
-            if(argc != 2){
-                goto usage;
-            }
-            for(ii = 0;((ii < EEPROM_LENGTH) && (error == 0));ii++){
-                if(EEPROMWrite(ii, default_eeprom[ii]) != 0){
-                    printf("Write Error\n");
-                    error = 1;
-                }
-            }
-            break;
-        }
-        default:{
-            goto usage;
-        }
-    }
-
-    goto done;
- usage:
-    printf ("Usage:\n%s\n", cmdtp->help);
-
- done:
-     return ret_val;
+int do_eeprom (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	int ret_val = 0;
+	unsigned int address = 0;
+	unsigned char value = 1;
+	unsigned char read_value;
+	int ii;
+	int error = 0;
+	unsigned char *mem_ptr;
+	unsigned char default_eeprom[] = EEPROM_DEFAULT;
+
+	if (argc < 2) {
+		goto usage;
+	}
+
+	cmd = argv[1][0];
+	if (argc > 2) {
+		address = simple_strtoul (argv[2], NULL, 16);
+		if (argc > 3) {
+			value = simple_strtoul (argv[3], NULL, 16) & 0xFF;
+		}
+	}
+
+	switch (cmd) {
+	case 'r':
+		if (address > 256) {
+			printf ("Illegal Address\n");
+			goto usage;
+		}
+		printf ("@0x%x: ", address);
+		for (ii = 0; ii < value; ii++) {
+			if (EEPROMRead (address + ii, &read_value) !=
+			    0) {
+				printf ("Read Error\n");
+			} else {
+				printf ("0x%02x ", read_value);
+			}
+
+			if (((ii + 1) % 16) == 0) {
+				printf ("\n");
+			}
+		}
+		printf ("\n");
+		break;
+	case 'w':
+		if (address > 256) {
+			printf ("Illegal Address\n");
+			goto usage;
+		}
+		if (argc < 4) {
+			goto usage;
+		}
+		if (EEPROMWrite (address, value) != 0) {
+			printf ("Write Error\n");
+		}
+		break;
+	case 'g':
+		if (argc != 3) {
+			goto usage;
+		}
+		mem_ptr = (unsigned char *) address;
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMRead (ii, &read_value) != 0) {
+				printf ("Read Error\n");
+				error = 1;
+			} else {
+				*mem_ptr = read_value;
+				mem_ptr++;
+			}
+		}
+		break;
+	case 'p':
+		if (argc != 3) {
+			goto usage;
+		}
+		mem_ptr = (unsigned char *) address;
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMWrite (ii, *mem_ptr) != 0) {
+				printf ("Write Error\n");
+				error = 1;
+			}
+
+			mem_ptr++;
+		}
+		break;
+	case 'd':
+		if (argc != 2) {
+			goto usage;
+		}
+		for (ii = 0; ((ii < EEPROM_LENGTH) && (error == 0));
+		     ii++) {
+			if (EEPROMWrite (ii, default_eeprom[ii]) != 0) {
+				printf ("Write Error\n");
+				error = 1;
+			}
+		}
+		break;
+	default:
+		goto usage;
+	}
+
+	goto done;
+      usage:
+	printf ("Usage:\n%s\n", cmdtp->help);
+
+      done:
+	return ret_val;
 
 }
 
-U_BOOT_CMD(
-    eeprom,    4,    0,    do_eeprom,
-    "eeprom  - read/write/copy to/from the PowerSpan II eeprom\n",
-    "eeprom r OFF [NUM]\n"
-    "    - read NUM words starting at OFF\n"
-    "eeprom w OFF VAL\n"
-    "    - write word VAL at offset OFF\n"
-    "eeprom g ADD\n"
-    "    - store contents of eeprom at address ADD\n"
-    "eeprom p ADD\n"
-    "    - put data stored at address ADD into the eeprom\n"
-    "eeprom d\n"
-    "    - return eeprom to default contents\n"
-);
-
-unsigned int PowerSpanRead(unsigned int theOffset){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int ret_val;
+U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
+	    "eeprom  - read/write/copy to/from the PowerSpan II eeprom\n",
+	    "eeprom r OFF [NUM]\n"
+	    "    - read NUM words starting at OFF\n"
+	    "eeprom w OFF VAL\n"
+	    "    - write word VAL at offset OFF\n"
+	    "eeprom g ADD\n"
+	    "    - store contents of eeprom at address ADD\n"
+	    "eeprom p ADD\n"
+	    "    - put data stored at address ADD into the eeprom\n"
+	    "eeprom d\n" "    - return eeprom to default contents\n");
+
+unsigned int PowerSpanRead (unsigned int theOffset)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int ret_val;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanRead: offset=%08x ", theOffset);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanRead: offset=%08x ", theOffset);
+	}
 #endif
-    ret_val = *ptr;
-    PSII_SYNC();
+	ret_val = *ptr;
+	PSII_SYNC ();
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("value=%08x\n", ret_val);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("value=%08x\n", ret_val);
+	}
 #endif
 
-    return ret_val;
+	return ret_val;
 }
 
-void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
+void PowerSpanWrite (unsigned int theOffset, unsigned int theValue)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanWrite: offset=%08x val=%02x\n", theOffset, theValue);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanWrite: offset=%08x val=%02x\n", theOffset,
+			theValue);
+	}
 #endif
-    *ptr = theValue;
-    PSII_SYNC();
+	*ptr = theValue;
+	PSII_SYNC ();
 }
 
 /**
@@ -506,21 +531,24 @@ void PowerSpanWrite(unsigned int theOffset, unsigned int theValue){
  * @param theOffset [IN] the register to access.
  * @param theMask   [IN] bits set in theMask will be set in the register.
  */
-void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int register_value;
+void PowerSpanSetBits (unsigned int theOffset, unsigned int theMask)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int register_value;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanSetBits: offset=%08x mask=%02x\n", theOffset, theMask);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanSetBits: offset=%08x mask=%02x\n",
+			theOffset, theMask);
+	}
 #endif
-    register_value = *ptr;
-    PSII_SYNC();
+	register_value = *ptr;
+	PSII_SYNC ();
 
-    register_value |= theMask;
-    *ptr = register_value;
-    PSII_SYNC();
+	register_value |= theMask;
+	*ptr = register_value;
+	PSII_SYNC ();
 }
 
 /**
@@ -528,21 +556,24 @@ void PowerSpanSetBits(unsigned int theOffset, unsigned int theMask){
  * @param theOffset [IN] the register to access.
  * @param theMask   [IN] bits set in theMask will be cleared in the register.
  */
-void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){
-    volatile unsigned int* ptr = (volatile unsigned int*)(PSPAN_BASEADDR + theOffset);
-    unsigned int register_value;
+void PowerSpanClearBits (unsigned int theOffset, unsigned int theMask)
+{
+	volatile unsigned int *ptr =
+		(volatile unsigned int *) (PSPAN_BASEADDR + theOffset);
+	unsigned int register_value;
 
 #ifdef VERBOSITY
-    if(gVerbosityLevel > 1){
-        printf("PowerSpanClearBits: offset=%08x mask=%02x\n", theOffset, theMask);
-    }
+	if (gVerbosityLevel > 1) {
+		printf ("PowerSpanClearBits: offset=%08x mask=%02x\n",
+			theOffset, theMask);
+	}
 #endif
-    register_value = *ptr;
-    PSII_SYNC();
+	register_value = *ptr;
+	PSII_SYNC ();
 
-    register_value &= ~theMask;
-    *ptr = register_value;
-    PSII_SYNC();
+	register_value &= ~theMask;
+	*ptr = register_value;
+	PSII_SYNC ();
 }
 
 /**
@@ -556,36 +587,41 @@ void PowerSpanClearBits(unsigned int theOffset, unsigned int theMask){
  * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size).
  * @param thePCIBaseAddr   [IN] the PCI address for the image (assumed to be valid with provided block size).
  */
-int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){
-    unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF;
-    unsigned int reg_value = 0;
-
-    /* Make sure that the Slave Image is disabled */
-    PowerSpanClearBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    /* Setup the mask required for requested PB Slave Image configuration */
-    reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24);
-    if(theMemIOFlag == PB_SLAVE_USE_MEM_IO){
-        reg_value |= PB_SLAVE_CSR_MEM_IO;
-    }
-
-    /* hardcoding the following:
-        TA_EN = 1
-        MD_EN = 0
-        MODE  = 0
-        PRKEEP = 0
-        RD_AMT = 0
-    */
-    PowerSpanWrite((REGS_PB_SLAVE_CSR + reg_offset), reg_value);
-
-    /* these values are not checked by software */
-    PowerSpanWrite((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr);
-    PowerSpanWrite((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr);
-
-    /* Enable the Slave Image */
-    PowerSpanSetBits((REGS_PB_SLAVE_CSR + reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    return 0;
+int SetSlaveImage (int theImageIndex, unsigned int theBlockSize,
+		   int theMemIOFlag, int theEndianness,
+		   unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr)
+{
+	unsigned int reg_offset = theImageIndex * PB_SLAVE_IMAGE_OFF;
+	unsigned int reg_value = 0;
+
+	/* Make sure that the Slave Image is disabled */
+	PowerSpanClearBits ((REGS_PB_SLAVE_CSR + reg_offset),
+			    PB_SLAVE_CSR_IMG_EN);
+
+	/* Setup the mask required for requested PB Slave Image configuration */
+	reg_value = PB_SLAVE_CSR_TA_EN | theEndianness | (theBlockSize << 24);
+	if (theMemIOFlag == PB_SLAVE_USE_MEM_IO) {
+		reg_value |= PB_SLAVE_CSR_MEM_IO;
+	}
+
+	/* hardcoding the following:
+	   TA_EN = 1
+	   MD_EN = 0
+	   MODE  = 0
+	   PRKEEP = 0
+	   RD_AMT = 0
+	 */
+	PowerSpanWrite ((REGS_PB_SLAVE_CSR + reg_offset), reg_value);
+
+	/* these values are not checked by software */
+	PowerSpanWrite ((REGS_PB_SLAVE_BADDR + reg_offset), theLocalBaseAddr);
+	PowerSpanWrite ((REGS_PB_SLAVE_TADDR + reg_offset), thePCIBaseAddr);
+
+	/* Enable the Slave Image */
+	PowerSpanSetBits ((REGS_PB_SLAVE_CSR + reg_offset),
+			  PB_SLAVE_CSR_IMG_EN);
+
+	return 0;
 }
 
 /**
@@ -602,111 +638,113 @@ int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag
  * @param theLocalBaseAddr [IN] the Local address for the image (assumed to be valid with provided block size).
  * @param thePCIBaseAddr   [IN] the PCI address for the image (assumed to be valid with provided block size).
  */
-int SetTargetImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr){
-    unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF;
-    unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF;
-    unsigned int reg_value = 0;
-
-    /* Make sure that the Slave Image is disabled */
-    PowerSpanClearBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    /* Setup the mask required for requested PB Slave Image configuration */
-    reg_value = PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) | PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness;
-    if(theMemIOFlag == PX_TGT_USE_MEM_IO){
-        reg_value |= PX_TGT_MEM_IO;
-    }
-
-    /* hardcoding the following:
-        TA_EN = 1
-        BAR_EN = 1
-        MD_EN = 0
-        MODE  = 0
-        DEST  = 0
-        RTT = 01010
-        GBL = 0
-        CI = 0
-        WTT = 00010
-        PRKEEP = 0
-        MRA = 0
-        RD_AMT = 0
-    */
-    PowerSpanWrite((REGS_P1_TGT_CSR + csr_reg_offset), reg_value);
-
-    PowerSpanWrite((REGS_P1_TGT_TADDR + csr_reg_offset), theLocalBaseAddr);
-
-    if(thePCIBaseAddr != (unsigned int)NULL){
-        PowerSpanWrite((REGS_P1_BST + pci_reg_offset), thePCIBaseAddr);
-    }
-
-    /* Enable the Slave Image */
-    PowerSpanSetBits((REGS_P1_TGT_CSR + csr_reg_offset), PB_SLAVE_CSR_IMG_EN);
-
-    return 0;
+int SetTargetImage (int theImageIndex, unsigned int theBlockSize,
+		    int theMemIOFlag, int theEndianness,
+		    unsigned int theLocalBaseAddr,
+		    unsigned int thePCIBaseAddr)
+{
+	unsigned int csr_reg_offset = theImageIndex * P1_TGT_IMAGE_OFF;
+	unsigned int pci_reg_offset = theImageIndex * P1_BST_OFF;
+	unsigned int reg_value = 0;
+
+	/* Make sure that the Slave Image is disabled */
+	PowerSpanClearBits ((REGS_P1_TGT_CSR + csr_reg_offset),
+			    PB_SLAVE_CSR_IMG_EN);
+
+	/* Setup the mask required for requested PB Slave Image configuration */
+	reg_value =
+		PX_TGT_CSR_TA_EN | PX_TGT_CSR_BAR_EN | (theBlockSize << 24) |
+		PX_TGT_CSR_RTT_READ | PX_TGT_CSR_WTT_WFLUSH | theEndianness;
+	if (theMemIOFlag == PX_TGT_USE_MEM_IO) {
+		reg_value |= PX_TGT_MEM_IO;
+	}
+
+	/* hardcoding the following:
+	   TA_EN = 1
+	   BAR_EN = 1
+	   MD_EN = 0
+	   MODE  = 0
+	   DEST  = 0
+	   RTT = 01010
+	   GBL = 0
+	   CI = 0
+	   WTT = 00010
+	   PRKEEP = 0
+	   MRA = 0
+	   RD_AMT = 0
+	 */
+	PowerSpanWrite ((REGS_P1_TGT_CSR + csr_reg_offset), reg_value);
+
+	PowerSpanWrite ((REGS_P1_TGT_TADDR + csr_reg_offset),
+			theLocalBaseAddr);
+
+	if (thePCIBaseAddr != (unsigned int) NULL) {
+		PowerSpanWrite ((REGS_P1_BST + pci_reg_offset),
+				thePCIBaseAddr);
+	}
+
+	/* Enable the Slave Image */
+	PowerSpanSetBits ((REGS_P1_TGT_CSR + csr_reg_offset),
+			  PB_SLAVE_CSR_IMG_EN);
+
+	return 0;
 }
 
-int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]){
-    char cmd;
-    int ret_val = 1;
-    unsigned int image_index;
-    unsigned int block_size;
-    unsigned int mem_io;
-    unsigned int local_addr;
-    unsigned int pci_addr;
-    int endianness;
-
-    if(argc != 8){
-        goto usage;
-    }
-
-    cmd = argv[1][0];
-    image_index = simple_strtoul(argv[2], NULL, 16);
-    block_size  = simple_strtoul(argv[3], NULL, 16);
-    mem_io      = simple_strtoul(argv[4], NULL, 16);
-    endianness  = argv[5][0];
-    local_addr  = simple_strtoul(argv[6], NULL, 16);
-    pci_addr    = simple_strtoul(argv[7], NULL, 16);
-
-
-    switch (cmd){
-        case 'i':{
-            if(tolower(endianness) == 'b'){
-                endianness = PX_TGT_CSR_BIG_END;
-            }
-            else if(tolower(endianness) == 'l'){
-                endianness = PX_TGT_CSR_TRUE_LEND;
-            }
-            else{
-                goto usage;
-            }
-            SetTargetImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr);
-            break;
-        }
-        case 'o':{
-            if(tolower(endianness) == 'b'){
-                endianness = PB_SLAVE_CSR_BIG_END;
-            }
-            else if(tolower(endianness) == 'l'){
-                endianness = PB_SLAVE_CSR_TRUE_LEND;
-            }
-            else{
-                goto usage;
-            }
-            SetSlaveImage(image_index, block_size, mem_io, endianness, local_addr, pci_addr);
-            break;
-        }
-        default:{
-            goto usage;
-        }
-    }
-
-    goto done;
- usage:
-    printf ("Usage:\n%s\n", cmdtp->help);
-
- done:
-     return ret_val;
-
+int do_bridge (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+	char cmd;
+	int ret_val = 1;
+	unsigned int image_index;
+	unsigned int block_size;
+	unsigned int mem_io;
+	unsigned int local_addr;
+	unsigned int pci_addr;
+	int endianness;
+
+	if (argc != 8) {
+		goto usage;
+	}
+
+	cmd = argv[1][0];
+	image_index = simple_strtoul (argv[2], NULL, 16);
+	block_size = simple_strtoul (argv[3], NULL, 16);
+	mem_io = simple_strtoul (argv[4], NULL, 16);
+	endianness = argv[5][0];
+	local_addr = simple_strtoul (argv[6], NULL, 16);
+	pci_addr = simple_strtoul (argv[7], NULL, 16);
+
+
+	switch (cmd) {
+	case 'i':
+		if (tolower (endianness) == 'b') {
+			endianness = PX_TGT_CSR_BIG_END;
+		} else if (tolower (endianness) == 'l') {
+			endianness = PX_TGT_CSR_TRUE_LEND;
+		} else {
+			goto usage;
+		}
+		SetTargetImage (image_index, block_size, mem_io,
+				endianness, local_addr, pci_addr);
+		break;
+	case 'o':
+		if (tolower (endianness) == 'b') {
+			endianness = PB_SLAVE_CSR_BIG_END;
+		} else if (tolower (endianness) == 'l') {
+			endianness = PB_SLAVE_CSR_TRUE_LEND;
+		} else {
+			goto usage;
+		}
+		SetSlaveImage (image_index, block_size, mem_io,
+			       endianness, local_addr, pci_addr);
+		break;
+	default:
+		goto usage;
+	}
+
+	goto done;
+usage:
+	printf ("Usage:\n%s\n", cmdtp->help);
+
+done:
+	return ret_val;
 }
-
-
-