powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 1134 deletions

diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c
deleted file mode 100644
index 49a8295bb3..0000000000
--- a/arch/powerpc/cpu/ppc4xx/speed.c
+++ /dev/null
@@ -1,1134 +0,0 @@
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ONE_BILLION        1000000000
-#ifdef DEBUG
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-#if defined(CONFIG_405GP)
-
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
-	unsigned long pllmr;
-	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
-	uint pvr = get_pvr();
-	unsigned long psr;
-	unsigned long m;
-
-	/*
-	 * Read PLL Mode register
-	 */
-	pllmr = mfdcr (CPC0_PLLMR);
-
-	/*
-	 * Read Pin Strapping register
-	 */
-	psr = mfdcr (CPC0_PSR);
-
-	/*
-	 * Determine FWD_DIV.
-	 */
-	sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
-
-	/*
-	 * Determine FBK_DIV.
-	 */
-	sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
-	if (sysInfo->pllFbkDiv == 0) {
-		sysInfo->pllFbkDiv = 16;
-	}
-
-	/*
-	 * Determine PLB_DIV.
-	 */
-	sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
-
-	/*
-	 * Determine PCI_DIV.
-	 */
-	sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
-
-	/*
-	 * Determine EXTBUS_DIV.
-	 */
-	sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
-
-	/*
-	 * Determine OPB_DIV.
-	 */
-	sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
-
-	/*
-	 * Check if PPC405GPr used (mask minor revision field)
-	 */
-	if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
-		/*
-		 * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
-		 */
-		sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
-
-		/*
-		 * Determine factor m depending on PLL feedback clock source
-		 */
-		if (!(psr & PSR_PCI_ASYNC_EN)) {
-			if (psr & PSR_NEW_MODE_EN) {
-				/*
-				 * sync pci clock used as feedback (new mode)
-				 */
-				m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
-			} else {
-				/*
-				 * sync pci clock used as feedback (legacy mode)
-				 */
-				m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
-			}
-		} else if (psr & PSR_NEW_MODE_EN) {
-			if (psr & PSR_PERCLK_SYNC_MODE_EN) {
-				/*
-				 * PerClk used as feedback (new mode)
-				 */
-				m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
-			} else {
-				/*
-				 * CPU clock used as feedback (new mode)
-				 */
-				m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-			}
-		} else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
-			/*
-			 * PerClk used as feedback (legacy mode)
-			 */
-			m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
-		} else {
-			/*
-			 * PLB clock used as feedback (legacy mode)
-			 */
-			m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
-		}
-
-		sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
-			(unsigned long long)sysClkPeriodPs;
-		sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
-		sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
-	} else {
-		/*
-		 * Check pllFwdDiv to see if running in bypass mode where the CPU speed
-		 * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
-		 * to make sure it is within the proper range.
-		 *    spec:    VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
-		 * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
-		 */
-		if (sysInfo->pllFwdDiv == 1) {
-			sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
-			sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
-		} else {
-			sysInfo->freqVCOHz = ( 1000000000000LL *
-					       (unsigned long long)sysInfo->pllFwdDiv *
-					       (unsigned long long)sysInfo->pllFbkDiv *
-					       (unsigned long long)sysInfo->pllPlbDiv
-				) / (unsigned long long)sysClkPeriodPs;
-			sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
-							   sysInfo->pllFbkDiv)) * 10000;
-			sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
-		}
-	}
-
-	sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-	sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-	sysInfo->freqUART = sysInfo->freqProcessor;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
-	ulong val;
-	PPC4xx_SYS_INFO sys_info;
-
-	get_sys_info (&sys_info);
-	val = sys_info.freqPLB / sys_info.pllPciDiv;
-	return val;
-}
-
-
-#elif defined(CONFIG_440)
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX)
-static u8 pll_fwdv_multi_bits[] = {
-	/* values for:  1 - 16 */
-	0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
-	0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
-};
-
-u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
-{
-	u32 index;
-
-	for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
-		if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
-			return index + 1;
-
-	return 0;
-}
-
-static u8 pll_fbdv_multi_bits[] = {
-	/* values for:  1 - 100 */
-	0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
-	0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
-	0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
-	0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
-	0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
-	0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
-	0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
-	0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
-	0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
-	0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
-	/* values for:  101 - 200 */
-	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
-	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
-	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
-	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
-	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
-	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
-	0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
-	0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
-	0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
-	0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
-	/* values for:  201 - 255 */
-	0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
-	0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
-	0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
-	0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
-	0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
-	0x03, 0x87, 0x0f, 0x9f, 0x3f  /* END */
-};
-
-u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
-{
-	u32 index;
-
-	for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
-		if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
-			return index + 1;
-
-	return 0;
-}
-
-/*
- * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
- *            with latest EAS
- */
-void get_sys_info (sys_info_t * sysInfo)
-{
-	unsigned long strp0;
-	unsigned long strp1;
-	unsigned long temp;
-	unsigned long m;
-	unsigned long plbedv0;
-
-	/* Extract configured divisors */
-	mfsdr(SDR0_SDSTP0, strp0);
-	mfsdr(SDR0_SDSTP1, strp1);
-
-	temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
-	sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
-
-	temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
-	sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
-
-	temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
-	sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
-
-	temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
-	sysInfo->pllOpbDiv = temp ? temp : 4;
-
-	/* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
-	temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
-	sysInfo->pllExtBusDiv = temp ? temp : 4;
-
-	temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
-	plbedv0 = temp ? temp: 8;
-
-	/* Calculate 'M' based on feedback source */
-	temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
-	if (temp == 0) {
-		/* PLL internal feedback */
-		m = sysInfo->pllFbkDiv;
-	} else {
-		/* PLL PerClk feedback */
-		m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
-			sysInfo->pllExtBusDiv;
-	}
-
-	/* Now calculate the individual clocks */
-	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
-	sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
-	sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-	sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
-	sysInfo->freqDDR = sysInfo->freqPLB;
-	sysInfo->freqUART = sysInfo->freqPLB;
-
-	return;
-}
-
-#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-    defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void get_sys_info (sys_info_t *sysInfo)
-{
-	unsigned long temp;
-	unsigned long reg;
-	unsigned long lfdiv;
-	unsigned long m;
-	unsigned long prbdv0;
-	/*
-	  WARNING: ASSUMES the following:
-	  ENG=1
-	  PRADV0=1
-	  PRBDV0=1
-	*/
-
-	/* Decode CPR0_PLLD0 for divisors */
-	mfcpr(CPR0_PLLD, reg);
-	temp = (reg & PLLD_FWDVA_MASK) >> 16;
-	sysInfo->pllFwdDivA = temp ? temp : 16;
-	temp = (reg & PLLD_FWDVB_MASK) >> 8;
-	sysInfo->pllFwdDivB = temp ? temp: 8 ;
-	temp = (reg & PLLD_FBDV_MASK) >> 24;
-	sysInfo->pllFbkDiv = temp ? temp : 32;
-	lfdiv = reg & PLLD_LFBDV_MASK;
-
-	mfcpr(CPR0_OPBD0, reg);
-	temp = (reg & OPBDDV_MASK) >> 24;
-	sysInfo->pllOpbDiv = temp ? temp : 4;
-
-	mfcpr(CPR0_PERD, reg);
-	temp = (reg & PERDV_MASK) >> 24;
-	sysInfo->pllExtBusDiv = temp ? temp : 8;
-
-	mfcpr(CPR0_PRIMBD0, reg);
-	temp = (reg & PRBDV_MASK) >> 24;
-	prbdv0 = temp ? temp : 8;
-
-	mfcpr(CPR0_SPCID, reg);
-	temp = (reg & SPCID_MASK) >> 24;
-	sysInfo->pllPciDiv = temp ? temp : 4;
-
-	/* Calculate 'M' based on feedback source */
-	mfsdr(SDR0_SDSTP0, reg);
-	temp = (reg & PLLSYS0_SEL_MASK) >> 27;
-	if (temp == 0) { /* PLL output */
-		/* Figure which pll to use */
-		mfcpr(CPR0_PLLC, reg);
-		temp = (reg & PLLC_SRC_MASK) >> 29;
-		if (!temp) /* PLLOUTA */
-			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
-		else       /* PLLOUTB */
-			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
-	}
-	else if (temp == 1) /* CPU output */
-		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-	else /* PerClk */
-		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
-	/* Now calculate the individual clocks */
-	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
-	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
-	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
-	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
-	sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
-	sysInfo->freqUART = sysInfo->freqPLB;
-
-	/* Figure which timer source to use */
-	if (mfspr(SPRN_CCR1) & 0x0080) {
-		/* External Clock, assume same as SYS_CLK */
-		temp = sysInfo->freqProcessor / 2;  /* Max extern clock speed */
-		if (CONFIG_SYS_CLK_FREQ > temp)
-			sysInfo->freqTmrClk = temp;
-		else
-			sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
-	}
-	else  /* Internal clock */
-		sysInfo->freqTmrClk = sysInfo->freqProcessor;
-}
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
-	sys_info_t sys_info;
-	get_sys_info (&sys_info);
-	return sys_info.freqPCI;
-}
-
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
-	&& !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
-	unsigned long strp0;
-	unsigned long temp;
-	unsigned long m;
-
-	/* Extract configured divisors */
-	strp0 = mfdcr( CPC0_STRP0 );
-	sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
-	sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
-	temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
-	sysInfo->pllFbkDiv = temp ? temp : 16;
-	sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
-	sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
-
-	/* Calculate 'M' based on feedback source */
-	if( strp0 & PLLSYS0_EXTSL_MASK )
-		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-	else
-		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-
-	/* Now calculate the individual clocks */
-	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
-	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
-	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
-	if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
-		sysInfo->freqPLB >>= 1;
-	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-	sysInfo->freqUART = sysInfo->freqPLB;
-}
-#else
-
-#if !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
-	unsigned long strp0;
-	unsigned long strp1;
-	unsigned long temp;
-	unsigned long temp1;
-	unsigned long lfdiv;
-	unsigned long m;
-	unsigned long prbdv0;
-
-#if defined(CONFIG_YUCCA)
-	unsigned long sys_freq;
-	unsigned long sys_per=0;
-	unsigned long msr;
-	unsigned long pci_clock_per;
-	unsigned long sdr_ddrpll;
-
-	/*-------------------------------------------------------------------------+
-	 | Get the system clock period.
-	 +-------------------------------------------------------------------------*/
-	sys_per = determine_sysper();
-
-	msr = (mfmsr () & ~(MSR_EE));	/* disable interrupts */
-
-	/*-------------------------------------------------------------------------+
-	 | Calculate the system clock speed from the period.
-	 +-------------------------------------------------------------------------*/
-	sys_freq = (ONE_BILLION / sys_per) * 1000;
-#endif
-
-	/* Extract configured divisors */
-	mfsdr( SDR0_SDSTP0,strp0 );
-	mfsdr( SDR0_SDSTP1,strp1 );
-
-	temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
-	sysInfo->pllFwdDivA = temp ? temp : 16 ;
-	temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
-	sysInfo->pllFwdDivB = temp ? temp: 8 ;
-	temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
-	sysInfo->pllFbkDiv = temp ? temp : 32;
-	temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
-	sysInfo->pllOpbDiv = temp ? temp : 4;
-	temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
-	sysInfo->pllExtBusDiv = temp ? temp : 4;
-	prbdv0 = (strp0 >> 2) & 0x7;
-
-	/* Calculate 'M' based on feedback source */
-	temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
-	temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
-	lfdiv = temp1 ? temp1 : 64;
-	if (temp == 0) { /* PLL output */
-		/* Figure which pll to use */
-		temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
-		if (!temp)
-			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
-		else
-			m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
-	}
-	else if (temp == 1) /* CPU output */
-		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-	else /* PerClk */
-		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
-	/* Now calculate the individual clocks */
-#if defined(CONFIG_YUCCA)
-	sysInfo->freqVCOMhz = (m * sys_freq) ;
-#else
-	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-#endif
-	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
-	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
-	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
-#if defined(CONFIG_YUCCA)
-	/* Determine PCI Clock Period */
-	pci_clock_per = determine_pci_clock_per();
-	sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
-	mfsdr(SDR0_DDR0, sdr_ddrpll);
-	sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-#endif
-
-	sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-#endif /* CONFIG_XILINX_440 */
-
-#if defined(CONFIG_YUCCA)
-unsigned long determine_sysper(void)
-{
-	unsigned int fpga_clocking_reg;
-	unsigned int master_clock_selection;
-	unsigned long master_clock_per = 0;
-	unsigned long fb_div_selection;
-	unsigned int vco_div_reg_value;
-	unsigned long vco_div_selection;
-	unsigned long sys_per = 0;
-	int extClkVal;
-
-	/*-------------------------------------------------------------------------+
-	 | Read FPGA reg 0 and reg 1 to get FPGA reg information
-	 +-------------------------------------------------------------------------*/
-	fpga_clocking_reg = in16(FPGA_REG16);
-
-
-	/* Determine Master Clock Source Selection */
-	master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
-
-	switch(master_clock_selection) {
-		case FPGA_REG16_MASTER_CLK_66_66:
-			master_clock_per = PERIOD_66_66MHZ;
-			break;
-		case FPGA_REG16_MASTER_CLK_50:
-			master_clock_per = PERIOD_50_00MHZ;
-			break;
-		case FPGA_REG16_MASTER_CLK_33_33:
-			master_clock_per = PERIOD_33_33MHZ;
-			break;
-		case FPGA_REG16_MASTER_CLK_25:
-			master_clock_per = PERIOD_25_00MHZ;
-			break;
-		case FPGA_REG16_MASTER_CLK_EXT:
-			if ((extClkVal==EXTCLK_33_33)
-					&& (extClkVal==EXTCLK_50)
-					&& (extClkVal==EXTCLK_66_66)
-					&& (extClkVal==EXTCLK_83)) {
-				/* calculate master clock period from external clock value */
-				master_clock_per=(ONE_BILLION/extClkVal) * 1000;
-			} else {
-				/* Unsupported */
-				DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
-				hang();
-			}
-			break;
-		default:
-			/* Unsupported */
-			DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
-			hang();
-			break;
-	}
-
-	/* Determine FB divisors values */
-	if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
-		if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
-			fb_div_selection = FPGA_FB_DIV_6;
-		else
-			fb_div_selection = FPGA_FB_DIV_12;
-	} else {
-		if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
-			fb_div_selection = FPGA_FB_DIV_10;
-		else
-			fb_div_selection = FPGA_FB_DIV_20;
-	}
-
-	/* Determine VCO divisors values */
-	vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
-
-	switch(vco_div_reg_value) {
-		case FPGA_REG16_VCO_DIV_4:
-			vco_div_selection = FPGA_VCO_DIV_4;
-			break;
-		case FPGA_REG16_VCO_DIV_6:
-			vco_div_selection = FPGA_VCO_DIV_6;
-			break;
-		case FPGA_REG16_VCO_DIV_8:
-			vco_div_selection = FPGA_VCO_DIV_8;
-			break;
-		case FPGA_REG16_VCO_DIV_10:
-		default:
-			vco_div_selection = FPGA_VCO_DIV_10;
-			break;
-	}
-
-	if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
-		switch(master_clock_per) {
-			case PERIOD_25_00MHZ:
-				if (fb_div_selection == FPGA_FB_DIV_12) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_75_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_50_00MHZ;
-				}
-				break;
-			case PERIOD_33_33MHZ:
-				if (fb_div_selection == FPGA_FB_DIV_6) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_50_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_33_33MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_10) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_83_33MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_10)
-						sys_per = PERIOD_33_33MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_12) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_100_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_66_66MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_8)
-						sys_per = PERIOD_50_00MHZ;
-				}
-				break;
-			case PERIOD_50_00MHZ:
-				if (fb_div_selection == FPGA_FB_DIV_6) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_75_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_50_00MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_10) {
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_83_33MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_10)
-						sys_per = PERIOD_50_00MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_12) {
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_100_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_8)
-						sys_per = PERIOD_75_00MHZ;
-				}
-				break;
-			case PERIOD_66_66MHZ:
-				if (fb_div_selection == FPGA_FB_DIV_6) {
-					if (vco_div_selection == FPGA_VCO_DIV_4)
-						sys_per = PERIOD_100_00MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_6)
-						sys_per = PERIOD_66_66MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_8)
-						sys_per = PERIOD_50_00MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_10) {
-					if (vco_div_selection == FPGA_VCO_DIV_8)
-						sys_per = PERIOD_83_33MHZ;
-					if (vco_div_selection == FPGA_VCO_DIV_10)
-						sys_per = PERIOD_66_66MHZ;
-				}
-				if (fb_div_selection == FPGA_FB_DIV_12) {
-					if (vco_div_selection == FPGA_VCO_DIV_8)
-						sys_per = PERIOD_100_00MHZ;
-				}
-				break;
-			default:
-				break;
-		}
-
-		if (sys_per == 0) {
-			/* Other combinations are not supported */
-			DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
-			hang();
-		}
-	} else {
-		/* calcul system clock without cheking */
-		/* if engineering option clock no check is selected */
-		/* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
-		sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
-	}
-
-	return(sys_per);
-}
-
-/*-------------------------------------------------------------------------+
-| determine_pci_clock_per.
-+-------------------------------------------------------------------------*/
-unsigned long determine_pci_clock_per(void)
-{
-	unsigned long pci_clock_selection,  pci_period;
-
-	/*-------------------------------------------------------------------------+
-	 | Read FPGA reg 6 to get PCI 0 FPGA reg information
-	 +-------------------------------------------------------------------------*/
-	pci_clock_selection = in16(FPGA_REG16);	/* was reg6 averifier */
-
-
-	pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
-
-	switch (pci_clock_selection) {
-		case FPGA_REG16_PCI0_CLK_133_33:
-			pci_period = PERIOD_133_33MHZ;
-			break;
-		case FPGA_REG16_PCI0_CLK_100:
-			pci_period = PERIOD_100_00MHZ;
-			break;
-		case FPGA_REG16_PCI0_CLK_66_66:
-			pci_period = PERIOD_66_66MHZ;
-			break;
-		default:
-			pci_period = PERIOD_33_33MHZ;
-			break;
-	}
-
-	return(pci_period);
-}
-#endif
-
-#elif defined(CONFIG_XILINX_405)
-extern void get_sys_info (sys_info_t * sysInfo);
-extern ulong get_PCI_freq (void);
-
-#elif defined(CONFIG_405)
-
-void get_sys_info (sys_info_t * sysInfo)
-{
-	sysInfo->freqVCOMhz=3125000;
-	sysInfo->freqProcessor=12*1000*1000;
-	sysInfo->freqPLB=50*1000*1000;
-	sysInfo->freqPCI=66*1000*1000;
-}
-
-#elif defined(CONFIG_405EP)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
-	unsigned long pllmr0;
-	unsigned long pllmr1;
-	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
-	unsigned long m;
-	unsigned long pllmr0_ccdv;
-
-	/*
-	 * Read PLL Mode registers
-	 */
-	pllmr0 = mfdcr (CPC0_PLLMR0);
-	pllmr1 = mfdcr (CPC0_PLLMR1);
-
-	/*
-	 * Determine forward divider A
-	 */
-	sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
-
-	/*
-	 * Determine forward divider B (should be equal to A)
-	 */
-	sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
-
-	/*
-	 * Determine FBK_DIV.
-	 */
-	sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
-	if (sysInfo->pllFbkDiv == 0)
-		sysInfo->pllFbkDiv = 16;
-
-	/*
-	 * Determine PLB_DIV.
-	 */
-	sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
-	/*
-	 * Determine PCI_DIV.
-	 */
-	sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
-
-	/*
-	 * Determine EXTBUS_DIV.
-	 */
-	sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
-
-	/*
-	 * Determine OPB_DIV.
-	 */
-	sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
-
-	/*
-	 * Determine the M factor
-	 */
-	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-
-	/*
-	 * Determine VCO clock frequency
-	 */
-	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
-		(unsigned long long)sysClkPeriodPs;
-
-	/*
-	 * Determine CPU clock frequency
-	 */
-	pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
-	if (pllmr1 & PLLMR1_SSCS_MASK) {
-		/*
-		 * This is true if FWDVA == FWDVB:
-		 * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
-		 *	/ pllmr0_ccdv;
-		 */
-		sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
-			/ sysInfo->pllFwdDiv / pllmr0_ccdv;
-	} else {
-		sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
-	}
-
-	/*
-	 * Determine PLB clock frequency
-	 */
-	sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
-	sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-
-	sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-
-	sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
-	ulong val;
-	PPC4xx_SYS_INFO sys_info;
-
-	get_sys_info (&sys_info);
-	val = sys_info.freqPLB / sys_info.pllPciDiv;
-	return val;
-}
-
-#elif defined(CONFIG_405EZ)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
-	unsigned long cpr_plld;
-	unsigned long cpr_pllc;
-	unsigned long cpr_primad;
-	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
-	unsigned long primad_cpudv;
-	unsigned long m;
-	unsigned long plloutb;
-
-	/*
-	 * Read PLL Mode registers
-	 */
-	mfcpr(CPR0_PLLD, cpr_plld);
-	mfcpr(CPR0_PLLC, cpr_pllc);
-
-	/*
-	 * Determine forward divider A
-	 */
-	sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
-
-	/*
-	 * Determine forward divider B
-	 */
-	sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
-	if (sysInfo->pllFwdDivB == 0)
-		sysInfo->pllFwdDivB = 8;
-
-	/*
-	 * Determine FBK_DIV.
-	 */
-	sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
-	if (sysInfo->pllFbkDiv == 0)
-		sysInfo->pllFbkDiv = 256;
-
-	/*
-	 * Read CPR_PRIMAD register
-	 */
-	mfcpr(CPR0_PRIMAD, cpr_primad);
-
-	/*
-	 * Determine PLB_DIV.
-	 */
-	sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
-	if (sysInfo->pllPlbDiv == 0)
-		sysInfo->pllPlbDiv = 16;
-
-	/*
-	 * Determine EXTBUS_DIV.
-	 */
-	sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
-	if (sysInfo->pllExtBusDiv == 0)
-		sysInfo->pllExtBusDiv = 16;
-
-	/*
-	 * Determine OPB_DIV.
-	 */
-	sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
-	if (sysInfo->pllOpbDiv == 0)
-		sysInfo->pllOpbDiv = 16;
-
-	/*
-	 * Determine the M factor
-	 */
-	if (cpr_pllc & PLLC_SRC_MASK)
-		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-	else
-		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-
-	/*
-	 * Determine VCO clock frequency
-	 */
-	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
-		(unsigned long long)sysClkPeriodPs;
-
-	/*
-	 * Determine CPU clock frequency
-	 */
-	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
-	if (primad_cpudv == 0)
-		primad_cpudv = 16;
-
-	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
-		sysInfo->pllFwdDiv / primad_cpudv;
-
-	/*
-	 * Determine PLB clock frequency
-	 */
-	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
-		sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
-
-	sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
-		sysInfo->pllOpbDiv;
-
-	sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
-		sysInfo->pllExtBusDiv;
-
-	plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
-		sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
-		sysInfo->pllFwdDivB);
-	sysInfo->freqUART = plloutb;
-}
-
-#elif defined(CONFIG_405EX)
-
-/*
- * TODO: We need to get the CPR registers and calculate these values correctly!!!!
- *   We need the specs!!!!
- */
-static unsigned char get_fbdv(unsigned char index)
-{
-	unsigned char ret = 0;
-	/* This is table should be 256 bytes.
-	 * Only take first 52 values.
-	 */
-	unsigned char fbdv_tb[] = {
-		0x00, 0xff, 0x7f, 0xfd,
-		0x7a, 0xf5, 0x6a, 0xd5,
-		0x2a, 0xd4, 0x29, 0xd3,
-		0x26, 0xcc, 0x19, 0xb3,
-		0x67, 0xce, 0x1d, 0xbb,
-		0x77, 0xee, 0x5d, 0xba,
-		0x74, 0xe9, 0x52, 0xa5,
-		0x4b, 0x96, 0x2c, 0xd8,
-		0x31, 0xe3, 0x46, 0x8d,
-		0x1b, 0xb7, 0x6f, 0xde,
-		0x3d, 0xfb, 0x76, 0xed,
-		0x5a, 0xb5, 0x6b, 0xd6,
-		0x2d, 0xdb, 0x36, 0xec,
-
-	};
-
-	if ((index & 0x7f) == 0)
-		return 1;
-	while (ret < sizeof (fbdv_tb)) {
-		if (fbdv_tb[ret] == index)
-			break;
-		ret++;
-	}
-	ret++;
-
-	return ret;
-}
-
-#define PLL_FBK_PLL_LOCAL	0
-#define PLL_FBK_CPU		1
-#define PLL_FBK_PERCLK		5
-
-void get_sys_info (sys_info_t * sysInfo)
-{
-	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
-	unsigned long m = 1;
-	unsigned int  tmp;
-	unsigned char fwdva[16] = {
-		1, 2, 14, 9, 4, 11, 16, 13,
-		12, 5, 6, 15, 10, 7, 8, 3,
-	};
-	unsigned char sel, cpudv0, plb2xDiv;
-
-	mfcpr(CPR0_PLLD, tmp);
-
-	/*
-	 * Determine forward divider A
-	 */
-	sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)];	/* FWDVA */
-
-	/*
-	 * Determine FBK_DIV.
-	 */
-	sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
-
-	/*
-	 * Determine PLBDV0
-	 */
-	sysInfo->pllPlbDiv = 2;
-
-	/*
-	 * Determine PERDV0
-	 */
-	mfcpr(CPR0_PERD, tmp);
-	tmp = (tmp >> 24) & 0x03;
-	sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
-
-	/*
-	 * Determine OPBDV0
-	 */
-	mfcpr(CPR0_OPBD0, tmp);
-	tmp = (tmp >> 24) & 0x03;
-	sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
-
-	/* Determine PLB2XDV0 */
-	mfcpr(CPR0_PLBD, tmp);
-	tmp = (tmp >> 16) & 0x07;
-	plb2xDiv = (tmp == 0) ? 8 : tmp;
-
-	/* Determine CPUDV0 */
-	mfcpr(CPR0_CPUD, tmp);
-	tmp = (tmp >> 24) & 0x07;
-	cpudv0 = (tmp == 0) ? 8 : tmp;
-
-	/* Determine SEL(5:7) in CPR0_PLLC */
-	mfcpr(CPR0_PLLC, tmp);
-	sel = (tmp >> 24) & 0x07;
-
-	/*
-	 * Determine the M factor
-	 * PLL local: M = FBDV
-	 * CPU clock: M = FBDV * FWDVA * CPUDV0
-	 * PerClk	: M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
-	 *
-	 */
-	switch (sel) {
-	case PLL_FBK_CPU:
-		m = sysInfo->pllFwdDiv * cpudv0;
-		break;
-	case PLL_FBK_PERCLK:
-		m = sysInfo->pllFwdDiv * plb2xDiv * 2
-			* sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
-		break;
-	case PLL_FBK_PLL_LOCAL:
-		break;
-	default:
-		printf("%s unknown m\n", __FUNCTION__);
-		return;
-
-	}
-	m *= sysInfo->pllFbkDiv;
-
-	/*
-	 * Determine VCO clock frequency
-	 */
-	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
-		(unsigned long long)sysClkPeriodPs;
-
-	/*
-	 * Determine CPU clock frequency
-	 */
-	sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
-
-	/*
-	 * Determine PLB clock frequency, ddr1x should be the same
-	 */
-	sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
-	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
-	sysInfo->freqDDR = sysInfo->freqPLB;
-	sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
-	sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-
-int get_clocks (void)
-{
-	sys_info_t sys_info;
-
-	get_sys_info (&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
-	gd->bus_clk = sys_info.freqPLB;
-
-	return (0);
-}
-
-
-/********************************************
- * get_bus_freq
- * return PLB bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
-	ulong val;
-
-#if defined(CONFIG_405GP) || \
-    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
-    defined(CONFIG_405EX) || defined(CONFIG_405) || \
-    defined(CONFIG_440)
-	sys_info_t sys_info;
-
-	get_sys_info (&sys_info);
-	val = sys_info.freqPLB;
-#else
-# error get_bus_freq() not implemented
-#endif
-
-	return val;
-}
-
-ulong get_OPB_freq (void)
-{
-	PPC4xx_SYS_INFO sys_info;
-
-	get_sys_info (&sys_info);
-
-	return sys_info.freqOPB;
-}