Patch by Steven Scholz, 4 Apr 2005:

- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT

1 files changed, 12 insertions, 8 deletions

diff --git a/README b/README
index 5b73238841..e74ce4c4e6 100644
--- a/README
+++ b/README
@@ -2129,14 +2129,18 @@ Low Level (hardware related) configuration options:
 		This only takes effect if the memory commands are activated
 		globally (CFG_CMD_MEM).
 
-- CONFIG_INIT_CRITICAL
-		[ARM only] If this variable is NOT defined, then
-		certain critical initializations (like setting up the
-		memory controller) are omitted. Normally this
-		variable MUST be defined for all boards. The only
-		exception is when U-Boot is loaded (to RAM) by some
-		other boot loader or by a debugger which performs
-		these intializations itself.
+- CONFIG_SKIP_LOWLEVEL_INIT
+- CONFIG_SKIP_RELOCATE_UBOOT
+
+                [ARM only] If these variables are defined, then
+                certain low level initializations (like setting up
+                the memory controller) are omitted and/or U-Boot does
+                not relocate itself into RAM.
+                Normally these variables MUST NOT be defined. The
+                only exception is when U-Boot is loaded (to RAM) by
+                some other boot loader or by a debugger which
+                performs these intializations itself.
+
 
 Building the Software:
 ======================