* Patch by Robert Schwebel, 04 Nov 2002:

  - use watchdog to reset PXA250 systems
  - added progress callbacks to (some of the) ARM code
  - update for Cogent CSB226 board

* Add support for FPS860 board

11 files changed, 626 insertions, 158 deletions

diff --git a/CHANGELOG b/CHANGELOG
index d6055f32d5..1a42bb3c11 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,13 @@
 Changes since for U-Boot 0.1.0:
 ======================================================================
 
+* Patch by Robert Schwebel, 04 Nov 2002:
+  - use watchdog to reset PXA250 systems
+  - added progress callbacks to (some of the) ARM code
+  - update for Cogent CSB226 board
+
+* Add support for FPS860 board
+
 * Patch by Guillaume Alexandre,, 04 Nov 2002:
   Improve PCI access on 32-bits Compact PCI bus
 
diff --git a/MAINTAINERS b/MAINTAINERS
index de370865ff..1bf18100e7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -49,6 +49,7 @@ Wolfgang Denk <wd@denx.de>
 	AMX860			MPC860
 	ETX094			MPC850
 	FPS850L			MPC850
+	FPS860L			MPC860
 	ICU862			MPC862
 	IP860			MPC860
 	IVML24			MPC860
diff --git a/Makefile b/Makefile
index 6bb00714fb..da70cf25cc 100644
--- a/Makefile
+++ b/Makefile
@@ -322,6 +322,7 @@ SXNI855T_config:	unconfig
 xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _FEC,,$(subst _config,,$1)))))
 
 FPS850L_config		\
+FPS860L_config		\
 TQM823L_config		\
 TQM823L_66MHz_config	\
 TQM823L_80MHz_config	\
diff --git a/README b/README
index 7e49a0c468..66cbd60433 100644
--- a/README
+++ b/README
@@ -320,7 +320,7 @@ The following options need to be configured:
 		CONFIG_GENIETV,    CONFIG_PM826,      CONFIG_ppmc8260,
 		CONFIG_GTH,        CONFIG_RPXClassic, CONFIG_rsdproto,
 		CONFIG_IAD210,     CONFIG_RPXlite,    CONFIG_sbc8260,
-		CONFIG_EBONY,      CONFIG_sacsng
+		CONFIG_EBONY,      CONFIG_sacsng,     CONFIG_FPS860L
 
 		ARM based boards:
 		-----------------
@@ -1665,7 +1665,7 @@ configurations; the following names are supported:
     FADS860T_config	  SXNI855T_config	rsdproto_config
     FPS850L_config	  Sandpoint8240_config	sbc8260_config
     GENIETV_config	  TQM823L_config	PIP405_config
-    GEN860T_config	  EBONY_config
+    GEN860T_config	  EBONY_config		FPS860L_config
 
 Note: for some board special configuration names may exist; check  if
       additional  information is available from the board vendor; for
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 1ed403464c..0d99aa85b6 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -24,14 +24,25 @@
  */
 
 #include <common.h>
+#include <asm/arch/pxa-regs.h>
 
-/* ------------------------------------------------------------------------- */
-
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
 
 /*
  * Miscelaneous platform dependent initialisations
  */
 
+
+/** 
+ * board_init: - setup some data structures
+ *
+ * @return: 0 in case of success	
+ */
+
 int board_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -48,6 +59,13 @@ int board_init (void)
 	return 0;
 }
 
+
+/** 
+ * dram_init: - setup dynamic RAM
+ *
+ * @return: 0 in case of success
+ */
+
 int dram_init (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -57,3 +75,62 @@ int dram_init (void)
 
 	return 0;
 }
+
+
+/** 
+ * csb226_set_led: - switch LEDs on or off
+ *
+ * @param led:   LED to switch (0,1,2)
+ * @param state: switch on (1) or off (0)
+ */
+
+void csb226_set_led(int led, int state)
+{
+	switch(led) {
+
+		case 0: if (state==1) { 
+				GPCR0 |= CSB226_USER_LED0; 
+			} else if (state==0) {
+				GPSR0 |= CSB226_USER_LED0;
+			}
+			break;
+
+		case 1: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED1;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED1;
+                        }
+                        break;
+
+		case 2: if (state==1) {
+                                GPCR0 |= CSB226_USER_LED2;
+                        } else if (state==0) {
+                                GPSR0 |= CSB226_USER_LED2;
+                        }
+                        break;
+	}
+
+	return;
+}
+
+
+/**
+ * show_boot_progress: - indicate state of the boot process
+ *
+ * @param status: Status number - see README for details. 
+ *
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most 
+ * important states (1, 5, 15).  
+ */
+
+void show_boot_progress (int status)
+{
+	switch(status) {
+		case  1: csb226_set_led(0,1); break;
+		case  5: csb226_set_led(1,1); break;
+		case 15: csb226_set_led(2,1); break;
+	}
+
+	return;
+}
+
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
index 0b956480fc..0b4e2f69ba 100644
--- a/board/csb226/flash.c
+++ b/board/csb226/flash.c
@@ -6,6 +6,9 @@
  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
  * Marius Groeger <mgroeger@sysgo.de>
  *
+ * (C) Copyright 2002
+ * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> 
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -26,6 +29,7 @@
  */
 
 #include <common.h>
+#include <asm/arch/pxa-regs.h>
 
 #define FLASH_BANK_SIZE 0x02000000
 #define MAIN_SECT_SIZE  0x40000         /* 2x16 = 256k per sector */
@@ -33,7 +37,10 @@
 flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
 
 
-/*-----------------------------------------------------------------------
+/**
+ * flash_init: - initialize data structures for flash chips
+ *
+ * @return: size of the flash
  */
 
 ulong flash_init(void)
@@ -41,8 +48,7 @@ ulong flash_init(void)
     int i, j;
     ulong size = 0;
 
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
-    {
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
 	ulong flashbase = 0;
 	flash_info[i].flash_id =
 	  (INTEL_MANUFACT & FLASH_VENDMASK) |
@@ -51,8 +57,7 @@ ulong flash_init(void)
 	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
 	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
 
-        switch (i)
-        {
+		switch (i) {
            case 0:
 	        flashbase = PHYS_FLASH_1;
                 break;
@@ -60,15 +65,13 @@ ulong flash_init(void)
 	        panic("configured to many flash banks!\n");
                 break;
         }
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
+		for (j = 0; j < flash_info[i].sector_count; j++) {
 	    flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
 	}
 	size += flash_info[i].size;
     }
 
-    /* Protect monitor and environment sectors
-     */
+	/* Protect monitor and environment sectors */
     flash_protect(FLAG_PROTECT_SET,
 		  CFG_FLASH_BASE,
 		  CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
@@ -82,16 +85,21 @@ ulong flash_init(void)
     return size;
 }
 
-/*-----------------------------------------------------------------------
+
+/**
+ * flash_print_info: - print information about the flash situation
+ *
+ * @param info: 
  */
+
 void flash_print_info  (flash_info_t *info)
 {
     int i, j;
 
-    for (j=0; j<CFG_MAX_FLASH_BANKS; j++)
-    {
-        switch (info->flash_id & FLASH_VENDMASK)
-        {
+	for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+
+		switch (info->flash_id & FLASH_VENDMASK) {
+
         case (INTEL_MANUFACT & FLASH_VENDMASK):
 	        printf("Intel: ");
 	        break;
@@ -100,38 +108,35 @@ void flash_print_info  (flash_info_t *info)
 	        break;
         }
 
-        switch (info->flash_id & FLASH_TYPEMASK)
-        {
+		switch (info->flash_id & FLASH_TYPEMASK) {
+
         case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
 	        printf("28F128J3 (128Mbit)\n");
 	        break;
         default:
 	        printf("Unknown Chip Type\n");
-	        goto Done;
-	        break;
+				return;
         }
 
         printf("  Size: %ld MB in %d Sectors\n",
 	        info->size >> 20, info->sector_count);
 
         printf("  Sector Start Addresses:");
-        for (i = 0; i < info->sector_count; i++)
-        {
-	        if ((i % 5) == 0)
-	        {
-	        printf ("\n   ");
-	        }
+		for (i = 0; i < info->sector_count; i++) {
+			if ((i % 5) == 0) printf ("\n   ");
+	        
 	        printf (" %08lX%s", info->start[i],
 		        info->protect[i] ? " (RO)" : "     ");
         }
         printf ("\n");
         info++;
     }
-
-Done:
 }
 
-/*-----------------------------------------------------------------------
+
+/**
+ * flash_erase: - erase flash sectors
+ *
  */
 
 int	flash_erase (flash_info_t *info, int s_first, int s_last)
@@ -146,19 +151,15 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	return ERR_INVAL;
     }
 
-    if ((info->flash_id & FLASH_VENDMASK) !=
-	(INTEL_MANUFACT & FLASH_VENDMASK)) {
+	if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
 	return ERR_UNKNOWN_FLASH_VENDOR;
-    }
 
     prot = 0;
     for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
+		if (info->protect[sect]) prot++;
 	}
-    }
-    if (prot)
-	return ERR_PROTECTED;
+
+	if (prot) return ERR_PROTECTED;
 
     /*
      * Disable interrupts which might cause a timeout
@@ -178,57 +179,63 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	reset_timer_masked();
 
 	if (info->protect[sect] == 0) {	/* not protected */
-	    /* vushort *addr = (vushort *)(info->start[sect]); */
-	    ushort *addr = (ushort *)(info->start[sect]);
+			u32 * volatile addr = (u32 * volatile)(info->start[sect]);
+
+			/* erase sector:                                    */
+			/* The strata flashs are aligned side by side on    */
+			/* the data bus, so we have to write the commands   */
+			/* to both chips here:                              */
 
-	    *addr = 0x20;	/* erase setup */
-	    *addr = 0xD0;	/* erase confirm */
+			*addr = 0x00200020;	/* erase setup */
+			*addr = 0x00D000D0;	/* erase confirm */
 
-	    while ((*addr & 0x80) != 0x80) {
+			while ((*addr & 0x00800080) != 0x00800080) {
 		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
-		    *addr = 0xB0; /* suspend erase */
-		    *addr = 0xFF;	/* reset to read mode */
+					*addr = 0x00B000B0; /* suspend erase*/
+					*addr = 0x00FF00FF; /* read mode    */
 		    rc = ERR_TIMOUT;
 		    goto outahere;
 		}
 	    }
 
-	    /* clear status register command */
-	    *addr = 0x50;
-	    /* reset to read mode */
-	    *addr = 0xFF;
+			*addr = 0x00500050; /* clear status register cmd.   */
+			*addr = 0x00FF00FF; /* resest to read mode          */
+
 	}
+		
 	printf("ok.\n");
     }
-    if (ctrlc())
-      printf("User Interrupt!\n");
+
+	if (ctrlc()) printf("User Interrupt!\n");
 
 outahere:
 
     /* allow flash to settle - wait 10 ms */
     udelay_masked(10000);
 
-    if (flag)
-      enable_interrupts();
+	if (flag) enable_interrupts();
 
     return rc;
 }
 
-/*-----------------------------------------------------------------------
- * Copy memory to flash
+
+/**
+ * write_word: - copy memory to flash
+ * 
+ * @param info:
+ * @param dest:
+ * @param data: 
+ * @return:
  */
 
 static int write_word (flash_info_t *info, ulong dest, ushort data)
 {
-    /* vushort *addr = (vushort *)dest, val; */
     ushort *addr = (ushort *)dest, val;
     int rc = ERR_OK;
     int flag;
 
-    /* Check if Flash is (sufficiently) erased
-     */
-    if ((*addr & data) != data)
-        return ERR_NOT_ERASED;
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) return ERR_NOT_ERASED;
 
     /*
      * Disable interrupts which might cause a timeout
@@ -252,12 +259,10 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
     reset_timer_masked();
 
     /* wait while polling the status register */
-    while(((val = *addr) & 0x80) != 0x80)
-    {
+	while(((val = *addr) & 0x80) != 0x80) {
 	if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
 	    rc = ERR_TIMOUT;
-	    /* suspend program command */
-	    *addr = 0xB0;
+			*addr = 0xB0; /* suspend program command */
 	    goto outahere;
 	}
     }
@@ -285,17 +290,23 @@ static int write_word (flash_info_t *info, ulong dest, ushort data)
     }
 
 outahere:
-    /* read array command */
-    *addr = 0xFF;
 
-    if (flag)
-      enable_interrupts();
+	*addr = 0xFF; /* read array command */
+	if (flag) enable_interrupts();
 
     return rc;
 }
 
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
+
+/**
+ * write_buf: - Copy memory to flash.
+ * 
+ * @param info:	 
+ * @param src:	source of copy transaction
+ * @param addr:	where to copy to
+ * @param cnt: 	number of bytes to copy
+ *
+ * @return	error code
  */
 
 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
@@ -344,9 +355,7 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	cnt -= 2;
     }
 
-    if (cnt == 0) {
-	return ERR_OK;
-    }
+	if (cnt == 0) return ERR_OK;
 
     /*
      * handle unaligned tail bytes
diff --git a/cpu/xscale/start.S b/cpu/xscale/start.S
index 6cc7c43dbd..cc24c30bfa 100644
--- a/cpu/xscale/start.S
+++ b/cpu/xscale/start.S
@@ -17,7 +17,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -32,7 +32,7 @@
 #include <version.h>
 
 .globl _start
-_start:	b       reset
+_start: b	reset
 	ldr	pc, _undefined_instruction
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
@@ -41,7 +41,7 @@ _start:	b       reset
 	ldr	pc, _irq
 	ldr	pc, _fiq
 
-_undefined_instruction:	.word undefined_instruction
+_undefined_instruction: .word undefined_instruction
 _software_interrupt:	.word software_interrupt
 _prefetch_abort:	.word prefetch_abort
 _data_abort:		.word data_abort
@@ -112,20 +112,20 @@ FIQ_STACK_START:
 
 
 /****************************************************************************/
-/*                                                                          */
-/* the actual reset code                                                    */
-/*                                                                          */
+/*									    */
+/* the actual reset code						    */
+/*									    */
 /****************************************************************************/
 
 reset:
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode        */
-	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)       */
+	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
+	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
 	orr	r0,r0,#0x13
 	msr	cpsr,r0
 
-	bl	cpu_init_crit		/* we do sys-critical inits         */
+	bl	cpu_init_crit		/* we do sys-critical inits	    */
 
-relocate:				/* relocate U-Boot to RAM          */
+relocate:				/* relocate U-Boot to RAM	   */
 	adr	r0, _start		/* r0 <- current position of code */
 	ldr	r2, _armboot_start
 	ldr	r3, _armboot_end
@@ -139,41 +139,47 @@ copy_loop:
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
 
-	/* Set up the stack                                                 */
+	/* Set up the stack						    */
 	ldr	r0, _uboot_reloc	/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-					/* FIXME: bdinfo should be here     */
+	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
+					/* FIXME: bdinfo should be here	    */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack */
 
 	ldr	pc, _start_armboot
 
-_start_armboot:	.word start_armboot
+_start_armboot: .word start_armboot
 
 
 /****************************************************************************/
-/*                                                                          */
-/* CPU_init_critical registers                                              */
-/*                                                                          */
-/* - setup important registers                                              */
-/* - setup memory timing                                                    */
-/*                                                                          */
+/*									    */
+/* CPU_init_critical registers						    */
+/*									    */
+/* - setup important registers						    */
+/* - setup memory timing						    */
+/*									    */
 /****************************************************************************/
 
-	/* Interrupt-Controller base address                                */
+	/* Interrupt-Controller base address				    */
 IC_BASE:	   .word	   0x40d00000
 #define ICMR	0x04
 
 /* Reset-Controller */
-RST_BASE:	.word   0x40f00030
+RST_BASE:	.word	0x40f00030
 #define RCSR	0x00
 
+	/* Operating System Timer */
+OSTIMER_BASE:	.word	0x40a00000
+#define OSMR3	0x0C
+#define OSCR	0x10
+#define OWER	0x18
+#define OIER	0x1C
 
-	/* Clock Manager Registers                                          */
-CC_BASE:		.word	0x41300000
-#define CCCR    0x00
-cpuspeed:	.word   CFG_CPUSPEED
+	/* Clock Manager Registers					    */
+CC_BASE:	.word	0x41300000
+#define CCCR	0x00
+cpuspeed:	.word	CFG_CPUSPEED
 
-	/* RS: ???                                                          */
+	/* RS: ???							    */
 	.macro CPWAIT
 	mrc  p15,0,r0,c2,c0,0
 	mov  r0,r0
@@ -183,7 +189,7 @@ cpuspeed:	.word   CFG_CPUSPEED
 
 cpu_init_crit:
 
-	/* mask all IRQs                                                    */
+	/* mask all IRQs						    */
 	ldr	r0, IC_BASE
 	mov	r1, #0x00
 	str	r1, [r0, #ICMR]
@@ -204,20 +210,20 @@ cpu_init_crit:
 
 	/* Memory interfaces are working. Disable MMU and enable I-cache.   */
 
-	ldr	r0, =0x2001		/* enable access to all coproc.     */
+	ldr	r0, =0x2001		/* enable access to all coproc.	    */
 	mcr	p15, 0, r0, c15, c1, 0
 	CPWAIT
 
 	mcr	p15, 0, r0, c7, c10, 4	/* drain the write & fill buffers   */
 	CPWAIT
 
-	mcr	p15, 0, r0, c7, c7, 0	/* flush Icache, Dcache and BTB     */
+	mcr	p15, 0, r0, c7, c7, 0	/* flush Icache, Dcache and BTB	    */
 	CPWAIT
 
 	mcr	p15, 0, r0, c8, c7, 0	/* flush instuction and data TLBs   */
 	CPWAIT
 
-	/* Enable the Icache                                                */
+	/* Enable the Icache						    */
 /*
 	mrc	p15, 0, r0, c1, c0, 0
 	orr	r0, r0, #0x1800
@@ -228,12 +234,12 @@ cpu_init_crit:
 
 
 /****************************************************************************/
-/*                                                                          */
-/* Interrupt handling                                                       */
-/*                                                                          */
+/*									    */
+/* Interrupt handling							    */
+/*									    */
 /****************************************************************************/
 
-/* IRQ stack frame                                                          */
+/* IRQ stack frame							    */
 
 #define S_FRAME_SIZE	72
 
@@ -259,38 +265,38 @@ cpu_init_crit:
 
 #define MODE_SVC 0x13
 
-	/* use bad_save_user_regs for abort/prefetch/undef/swi ...          */
+	/* use bad_save_user_regs for abort/prefetch/undef/swi ...	    */
 
 	.macro	bad_save_user_regs
 	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12           */
-	add     r8, sp, #S_PC
+	stmia	sp, {r0 - r12}			/* Calling r0-r12	    */
+	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_end
 	add	r2, r2, #CONFIG_STACKSIZE
 	sub	r2, r2, #8
-	ldmia	r2, {r2 - r4}                   /* get pc, cpsr, old_r0     */
-	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC           */
+	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
+	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
 	add	r5, sp, #S_SP
 	mov	r1, lr
-	stmia	r5, {r0 - r4}                   /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
+	stmia	r5, {r0 - r4}			/* save sp_SVC, lr_SVC, pc, cpsr, old_r */
 	mov	r0, sp
 	.endm
 
 
-	/* use irq_save_user_regs / irq_restore_user_regs for                */
-	/* IRQ/FIQ handling                                                  */
+	/* use irq_save_user_regs / irq_restore_user_regs for		     */
+	/* IRQ/FIQ handling						     */
 
 	.macro	irq_save_user_regs
 	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			/* Calling r0-r12            */
-	add     r8, sp, #S_PC
-	stmdb   r8, {sp, lr}^                   /* Calling SP, LR            */
-	str     lr, [r8, #0]                    /* Save calling PC           */
-	mrs     r6, spsr
-	str     r6, [r8, #4]                    /* Save CPSR                 */
-	str     r0, [r8, #8]                    /* Save OLD_R0               */
+	stmia	sp, {r0 - r12}			/* Calling r0-r12	     */
+	add	r8, sp, #S_PC
+	stmdb	r8, {sp, lr}^			/* Calling SP, LR	     */
+	str	lr, [r8, #0]			/* Save calling PC	     */
+	mrs	r6, spsr
+	str	r6, [r8, #4]			/* Save CPSR		     */
+	str	r0, [r8, #8]			/* Save OLD_R0		     */
 	mov	r0, sp
 	.endm
 
@@ -309,7 +315,7 @@ cpu_init_crit:
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
-	str     lr, [r13, #4]
+	str	lr, [r13, #4]
 
 	mov	r13, #MODE_SVC			@ prepare SVC-Mode
 	msr	spsr_c, r13
@@ -327,40 +333,40 @@ cpu_init_crit:
 
 
 /****************************************************************************/
-/*                                                                          */
-/* exception handlers                                                       */
-/*                                                                          */
+/*									    */
+/* exception handlers							    */
+/*									    */
 /****************************************************************************/
 
-	.align  5
+	.align	5
 undefined_instruction:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_undefined_instruction
+	bl	do_undefined_instruction
 
 	.align	5
 software_interrupt:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_software_interrupt
+	bl	do_software_interrupt
 
 	.align	5
 prefetch_abort:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_prefetch_abort
+	bl	do_prefetch_abort
 
 	.align	5
 data_abort:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_data_abort
+	bl	do_data_abort
 
 	.align	5
 not_used:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_not_used
+	bl	do_not_used
 
 #ifdef CONFIG_USE_IRQ
 
@@ -368,14 +374,14 @@ not_used:
 irq:
 	get_irq_stack
 	irq_save_user_regs
-	bl 	do_irq
+	bl	do_irq
 	irq_restore_user_regs
 
 	.align	5
 fiq:
 	get_fiq_stack
 	irq_save_user_regs		/* someone ought to write a more    */
-	bl 	do_fiq			/* effiction fiq_save_user_regs     */
+	bl	do_fiq			/* effiction fiq_save_user_regs	    */
 	irq_restore_user_regs
 
 #else
@@ -384,28 +390,40 @@ fiq:
 irq:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_irq
+	bl	do_irq
 
 	.align	5
 fiq:
 	get_bad_stack
 	bad_save_user_regs
-	bl 	do_fiq
+	bl	do_fiq
 
 #endif
 
-/*
- * FIXME How do we reset??? Watchdog timeout??
- */
+/************************************************************************/
+/*									*/
+/* Reset function: the PXA250 has no reset function, so we have to	*/
+/* perform a watchdog timeout to cause a reset.				*/
+/*									*/
+/************************************************************************/
 	.align	5
 .globl reset_cpu
 reset_cpu:
-	/*
-	ldr	r0, RST_BASE
-	mov	r1, #0x0			@ set bit 3-0 ...
-	str	r1, [r0, #RCSR]			@ ... to clear in RCSR
-	mov	r1, #0x1
-	str	r1, [r0, #RCSR]			@ and perform reset
-	*/
-	b	reset_cpu			@ silly, but repeat endlessly
+	/* We set OWE:WME (watchdog enable) and wait until timeout happens  */
+
+	ldr	r0, OSTIMER_BASE
+	ldr	r1, [r0, #OWER]
+	orr	r1, r1, #0x0001			/* bit0: WME                */
+	str	r1, [r0, #OWER]
+
+	/* OS timer does only wrap every 1165 seconds, so we have to set    */
+	/* the match register as well.                                      */
+
+	ldr	r1, [r0, #OSCR]			/* read OS timer            */
+	add	r1, r1, #0x800			/* let OSMR3 match after    */
+	add	r1, r1, #0x800			/* 4096*(1/3.6864MHz)=1ms   */
+	str	r1, [r0, #OSMR3]
+
+reset_endless:
 
+	b	reset_endless
diff --git a/include/commproc.h b/include/commproc.h
index 410b96d911..fb6ec00719 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -709,11 +709,11 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_FADS860T */
 
-/***  FPS850L  *********************************************************/
+/***  FPS850L, FPS860L  ************************************************/
 
-#ifdef CONFIG_FPS850L
+#if defined(CONFIG_FPS850L) || defined(CONFIG_FPS860L)
 /* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
+ * to configure the pins for SCC2 use.
  */
 #define	PROFF_ENET	PROFF_SCC2
 #define	CPM_CR_ENET	CPM_CR_CH_SCC2
@@ -732,7 +732,7 @@ typedef struct scc_enet {
  */
 #define SICR_ENET_MASK	((uint)0x0000ff00)
 #define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_FPS850L */
+#endif	/* CONFIG_FPS850L, CONFIG_FPS860L */
 
 /*** GEN860T **********************************************************/
 #if defined(CONFIG_GEN860T)
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
new file mode 100644
index 0000000000..d2ac9d2205
--- /dev/null
+++ b/include/configs/FPS860L.h
@@ -0,0 +1,331 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860		1	/* This is a MPC860 CPU		*/
+#define CONFIG_FPS860L		1	/* ...on a FingerPrint Sensor	*/
+
+#undef	CONFIG_8xx_CONS_SMC1
+#define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
+#undef	CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE		115200
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+#define CONFIG_BOOTCOMMAND	"bootm 40040000" /* autoboot command	*/
+
+#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
+				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
+				"nfsaddrs=10.0.0.99:10.0.0.2"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_BOOTP_MASK	CONFIG_BOOTP_ALL
+
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit - leave PLL multiplication factor unchanged !
+ */
+#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+/*#define	CFG_DER	0x2002000F*/
+#define CFG_DER	0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
+				 OR_SCY_5_CLK | OR_EHTR)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
+#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#define	CFG_OR3_PRELIM	CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA	97		/* start with divider for 100 MHz	*/
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index d38e9db183..b6c7302f5e 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -74,6 +74,7 @@
 #define CONFIG_IPADDR		192.168.1.56
 #define CONFIG_SERVERIP		192.168.1.2
 #define CONFIG_BOOTCOMMAND	"bootm 0x40000"
+#define CONFIG_SHOW_BOOT_PROGRESS
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
@@ -156,7 +157,7 @@
 #define CFG_GPCR0_VAL       0x08022080
 #define CFG_GPCR1_VAL       0x00000000
 #define CFG_GPCR2_VAL       0x00000000
-#define CFG_GPDR0_VAL       0xCD82A858
+#define CFG_GPDR0_VAL       0xCD82A878
 #define CFG_GPDR1_VAL       0xFCFFAB80
 #define CFG_GPDR2_VAL       0x0001FFFF
 #define CFG_GAFR0_L_VAL     0x80000000
@@ -191,10 +192,10 @@
 #define CFG_MCIO0_VAL       0x00000000
 #define CFG_MCIO1_VAL       0x00000000
 
-/*
-#define _LED        0x08000010
-#define LED_BLANK  (0x08000040)
-*/
+#define CSB226_USER_LED0	0x00000008
+#define CSB226_USER_LED1	0x00000010
+#define CSB226_USER_LED2	0x00000020
+
 
 /*
  * FLASH and environment organization
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index 33f86e9ffe..2fb8db8710 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -56,6 +56,13 @@ static void setup_videolfb_tag(gd_t *gd);
 static struct tag *params;
 #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */
 
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+# include <status_led.h>
+# define SHOW_BOOT_PROGRESS(arg)	show_boot_progress(arg)
+#else
+# define SHOW_BOOT_PROGRESS(arg)
+#endif
+
 extern image_header_t header;           /* from cmd_bootm.c */
 
 
@@ -80,6 +87,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
      * Check if there is an initrd image
      */
     if (argc >= 3) {
+	SHOW_BOOT_PROGRESS (9);
+
 	addr = simple_strtoul(argv[2], NULL, 16);
 
 	printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
@@ -89,6 +98,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 
 	if (ntohl(hdr->ih_magic) != IH_MAGIC) {
 	    printf ("Bad Magic Number\n");
+	    SHOW_BOOT_PROGRESS (-10);
 	    do_reset (cmdtp, flag, argc, argv);
 	}
 
@@ -100,9 +110,12 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 
 	if (crc32 (0, (char *)data, len) != checksum) {
 	    printf ("Bad Header Checksum\n");
+	    SHOW_BOOT_PROGRESS (-11);
 	    do_reset (cmdtp, flag, argc, argv);
 	}
 
+	SHOW_BOOT_PROGRESS (10);
+
 	print_image_hdr (hdr);
 
 	data = addr + sizeof(image_header_t);
@@ -115,15 +128,19 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 	    csum = crc32 (0, (char *)data, len);
 	    if (csum != ntohl(hdr->ih_dcrc)) {
 		printf ("Bad Data CRC\n");
+	        SHOW_BOOT_PROGRESS (-12);
 		do_reset (cmdtp, flag, argc, argv);
 	    }
 	    printf ("OK\n");
 	}
 
+	SHOW_BOOT_PROGRESS (11);
+
 	if ((hdr->ih_os   != IH_OS_LINUX)	||
 	    (hdr->ih_arch != IH_CPU_ARM)	||
 	    (hdr->ih_type != IH_TYPE_RAMDISK)	) {
 	    printf ("No Linux ARM Ramdisk Image\n");
+	    SHOW_BOOT_PROGRESS (-13);
 	    do_reset (cmdtp, flag, argc, argv);
 	}
 
@@ -134,6 +151,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 	ulong tail    = ntohl(len_ptr[0]) % 4;
 	int i;
 
+	SHOW_BOOT_PROGRESS (13);
+
 	/* skip kernel length and terminator */
 	data = (ulong)(&len_ptr[2]);
 	/* skip any additional image length fields */
@@ -151,6 +170,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 	/*
 	 * no initrd image
 	 */
+        SHOW_BOOT_PROGRESS (14);
+
 	data = 0;
     }
 
@@ -168,6 +189,8 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 	initrd_end = 0;
     }
 
+    SHOW_BOOT_PROGRESS (15);
+
 #ifdef DEBUG
     printf ("## Transferring control to Linux (at address %08lx) ...\n",
 	    (ulong)theKernel);