path: root/gcc-4.9/gcc/ada/sinput.ads

------------------------------------------------------------------------------
--                                                                          --
--                         GNAT COMPILER COMPONENTS                         --
--                                                                          --
--                               S I N P U T                                --
--                                                                          --
--                                 S p e c                                  --
--                                                                          --
--          Copyright (C) 1992-2013, Free Software Foundation, Inc.         --
--                                                                          --
-- GNAT is free software;  you can  redistribute it  and/or modify it under --
-- terms of the  GNU General Public License as published  by the Free Soft- --
-- ware  Foundation;  either version 3,  or (at your option) any later ver- --
-- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE.                                     --
--                                                                          --
-- As a special exception under Section 7 of GPL version 3, you are granted --
-- additional permissions described in the GCC Runtime Library Exception,   --
-- version 3.1, as published by the Free Software Foundation.               --
--                                                                          --
-- You should have received a copy of the GNU General Public License and    --
-- a copy of the GCC Runtime Library Exception along with this program;     --
-- see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see    --
-- <http://www.gnu.org/licenses/>.                                          --
--                                                                          --
-- GNAT was originally developed  by the GNAT team at  New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc.      --
--                                                                          --
------------------------------------------------------------------------------

--  This package contains the input routines used for reading the
--  input source file. The actual I/O routines are in OS_Interface,
--  with this module containing only the system independent processing.

--  General Note: throughout the compiler, we use the term line or source
--  line to refer to a physical line in the source, terminated by the end of
--  physical line sequence.

--  There are two distinct concepts of line terminator in GNAT

--    A logical line terminator is what corresponds to the "end of a line" as
--    described in RM 2.2 (13). Any of the characters FF, LF, CR or VT or any
--    wide character that is a Line or Paragraph Separator acts as an end of
--    logical line in this sense, and it is essentially irrelevant whether one
--    or more appears in sequence (since if a sequence of such characters is
--    regarded as separate ends of line, then the intervening logical lines
--    are null in any case).

--    A physical line terminator is a sequence of format effectors that is
--    treated as ending a physical line. Physical lines have no Ada semantic
--    significance, but they are significant for error reporting purposes,
--    since errors are identified by line and column location.

--  In GNAT, a physical line is ended by any of the sequences LF, CR/LF, or
--  CR. LF is used in typical Unix systems, CR/LF in DOS systems, and CR
--  alone in System 7. In addition, we recognize any of these sequences in
--  any of the operating systems, for better behavior in treating foreign
--  files (e.g. a Unix file with LF terminators transferred to a DOS system).
--  Finally, wide character codes in categories Separator, Line and Separator,
--  Paragraph are considered to be physical line terminators.

with Alloc;
with Casing; use Casing;
with Namet;  use Namet;
with Table;
with Types;  use Types;

package Sinput is

   type Type_Of_File is (
   --  Indicates type of file being read

      Src,
      --  Normal Ada source file

      Config,
      --  Configuration pragma file

      Def,
      --  Preprocessing definition file

      Preproc);
      --  Source file with preprocessing commands to be preprocessed

   type Instance_Id is new Nat;
   No_Instance_Id : constant Instance_Id;

   ----------------------------
   -- Source License Control --
   ----------------------------

   --  The following type indicates the license state of a source if it
   --  is known.

   type License_Type is
     (Unknown,
      --  Licensing status of this source unit is unknown

      Restricted,
      --  This is a non-GPL'ed unit that is restricted from depending
      --  on GPL'ed units (e.g. proprietary code is in this category)

      GPL,
      --  This file is licensed under the unmodified GPL. It is not allowed
      --  to depend on Non_GPL units, and Non_GPL units may not depend on
      --  this source unit.

      Modified_GPL,
      --  This file is licensed under the GNAT modified GPL (see header of
      --  This file for wording of the modification). It may depend on other
      --  Modified_GPL units or on unrestricted units.

      Unrestricted);
      --  The license on this file is permitted to depend on any other
      --  units, or have other units depend on it, without violating the
      --  license of this unit. Examples are public domain units, and
      --  units defined in the RM).

   --  The above license status is checked when the appropriate check is
   --  activated and one source depends on another, and the licensing state
   --  of both files is known:

   --  The prohibited combinations are:

   --    Restricted file may not depend on GPL file

   --    GPL file may not depend on Restricted file

   --    Modified GPL file may not depend on Restricted file
   --    Modified_GPL file may not depend on GPL file

   --  The reason for the last restriction here is that a client depending
   --  on a modified GPL file must be sure that the license condition is
   --  correct considered transitively.

   --  The licensing status is determined either by the presence of a
   --  specific pragma License, or by scanning the header for a predefined
   --  file, or any file if compiling in -gnatg mode.

   -----------------------
   -- Source File Table --
   -----------------------

   --  The source file table has an entry for each source file read in for
   --  this run of the compiler. This table is (default) initialized when
   --  the compiler is loaded, and simply accumulates entries as compilation
   --  proceeds and various routines in Sinput and its child packages are
   --  called to load required source files.

   --  Virtual entries are also created for generic templates when they are
   --  instantiated, as described in a separate section later on.

   --  In the case where there are multiple main units (e.g. in the case of
   --  the cross-reference tool), this table is not reset between these units,
   --  so that a given source file is only read once if it is used by two
   --  separate main units.

   --  The entries in the table are accessed using a Source_File_Index that
   --  ranges from 1 to Last_Source_File. Each entry has the following fields

   --  Note: fields marked read-only are set by Sinput or one of its child
   --  packages when a source file table entry is created, and cannot be
   --  subsequently modified, or alternatively are set only by very special
   --  circumstances, documented in the comments.

   --  File_Name : File_Name_Type (read-only)
   --    Name of the source file (simple name with no directory information)

   --  Full_File_Name : File_Name_Type (read-only)
   --    Full file name (full name with directory info), used for generation
   --    of error messages, etc.

   --  File_Type : Type_Of_File (read-only)
   --    Indicates type of file (source file, configuration pragmas file,
   --    preprocessor definition file, preprocessor input file).

   --  Reference_Name : File_Name_Type (read-only)
   --    Name to be used for source file references in error messages where
   --    only the simple name of the file is required. Identical to File_Name
   --    unless pragma Source_Reference is used to change it. Only processing
   --    for the Source_Reference pragma circuit may set this field.

   --  Full_Ref_Name : File_Name_Type (read-only)
   --    Name to be used for source file references in error messages where
   --    the full name of the file is required. Identical to Full_File_Name
   --    unless pragma Source_Reference is used to change it. Only processing
   --    for the Source_Reference pragma may set this field.

   --  Debug_Source_Name : File_Name_Type (read-only)
   --    Name to be used for source file references in debugging information
   --    where only the simple name of the file is required. Identical to
   --    Reference_Name unless the -gnatD (debug source file) switch is used.
   --    Only processing in Sprint that generates this file is permitted to
   --    set this field.

   --  Full_Debug_Name : File_Name_Type (read-only)
   --    Name to be used for source file references in debugging information
   --    where the full name of the file is required. This is identical to
   --    Full_Ref_Name unless the -gnatD (debug source file) switch is used.
   --    Only processing in Sprint that generates this file is permitted to
   --    set this field.

   --  Instance : Instance_Id (read-only)
   --    For entries corresponding to a generic instantiation, unique
   --    identifier denoting the full chain of nested instantiations. Set to
   --    No_Instance_Id for the case of a normal, non-instantiation entry.
   --    See below for details on the handling of generic instantiations.

   --  License : License_Type;
   --    License status of source file

   --  Num_SRef_Pragmas : Nat;
   --    Number of source reference pragmas present in source file

   --  First_Mapped_Line : Logical_Line_Number;
   --    This field stores logical line number of the first line in the
   --    file that is not a Source_Reference pragma. If no source reference
   --    pragmas are used, then the value is set to No_Line_Number.

   --  Source_Text : Source_Buffer_Ptr (read-only)
   --    Text of source file. Note that every source file has a distinct set
   --    of non-overlapping logical bounds, so it is possible to determine
   --    which file is referenced from a given subscript (Source_Ptr) value.

   --  Source_First : Source_Ptr; (read-only)
   --    Subscript of first character in Source_Text. Note that this cannot
   --    be obtained as Source_Text'First, because we use virtual origin
   --    addressing.

   --  Source_Last : Source_Ptr; (read-only)
   --    Subscript of last character in Source_Text. Note that this cannot
   --    be obtained as Source_Text'Last, because we use virtual origin
   --    addressing, so this value is always Source_Ptr'Last.

   --  Time_Stamp : Time_Stamp_Type; (read-only)
   --    Time stamp of the source file

   --  Source_Checksum : Word;
   --    Computed checksum for contents of source file. See separate section
   --    later on in this spec for a description of the checksum algorithm.

   --  Last_Source_Line : Physical_Line_Number;
   --    Physical line number of last source line. While a file is being
   --    read, this refers to the last line scanned. Once a file has been
   --    completely scanned, it is the number of the last line in the file,
   --    and hence also gives the number of source lines in the file.

   --  Keyword_Casing : Casing_Type;
   --    Casing style used in file for keyword casing. This is initialized
   --    to Unknown, and then set from the first occurrence of a keyword.
   --    This value is used only for formatting of error messages.

   --  Identifier_Casing : Casing_Type;
   --    Casing style used in file for identifier casing. This is initialized
   --    to Unknown, and then set from an identifier in the program as soon as
   --    one is found whose casing is sufficiently clear to make a decision.
   --    This value is used for formatting of error messages, and also is used
   --    in the detection of keywords misused as identifiers.

   --  Inlined_Call : Source_Ptr;
   --    Source file location of the subprogram call if this source file entry
   --    represents an inlined body. Set to No_Location otherwise.
   --    This field is read-only for clients.

   --  Inlined_Body : Boolean;
   --    This can only be set True if Instantiation has a value other than
   --    No_Location. If true it indicates that the instantiation is actually
   --    an instance of an inlined body.
   --    ??? Redundant, always equal to (Inlined_Call /= No_Location)

   --  Template : Source_File_Index; (read-only)
   --    Source file index of the source file containing the template if this
   --    is a generic instantiation. Set to No_Source_File for the normal case
   --    of a non-instantiation entry. See Sinput-L for details.

   --  Unit : Unit_Number_Type;
   --    Identifies the unit contained in this source file. Set by
   --    Initialize_Scanner, must not be subsequently altered.

   --  The source file table is accessed by clients using the following
   --  subprogram interface:

   subtype SFI is Source_File_Index;

   System_Source_File_Index : SFI;
   --  The file system.ads is always read by the compiler to determine the
   --  settings of the target parameters in the private part of System. This
   --  variable records the source file index of system.ads. Typically this
   --  will be 1 since system.ads is read first.

   function Debug_Source_Name (S : SFI) return File_Name_Type;
   function File_Name         (S : SFI) return File_Name_Type;
   function File_Type         (S : SFI) return Type_Of_File;
   function First_Mapped_Line (S : SFI) return Logical_Line_Number;
   function Full_Debug_Name   (S : SFI) return File_Name_Type;
   function Full_File_Name    (S : SFI) return File_Name_Type;
   function Full_Ref_Name     (S : SFI) return File_Name_Type;
   function Identifier_Casing (S : SFI) return Casing_Type;
   function Inlined_Body      (S : SFI) return Boolean;
   function Inlined_Call      (S : SFI) return Source_Ptr;
   function Instance          (S : SFI) return Instance_Id;
   function Keyword_Casing    (S : SFI) return Casing_Type;
   function Last_Source_Line  (S : SFI) return Physical_Line_Number;
   function License           (S : SFI) return License_Type;
   function Num_SRef_Pragmas  (S : SFI) return Nat;
   function Reference_Name    (S : SFI) return File_Name_Type;
   function Source_Checksum   (S : SFI) return Word;
   function Source_First      (S : SFI) return Source_Ptr;
   function Source_Last       (S : SFI) return Source_Ptr;
   function Source_Text       (S : SFI) return Source_Buffer_Ptr;
   function Template          (S : SFI) return Source_File_Index;
   function Unit              (S : SFI) return Unit_Number_Type;
   function Time_Stamp        (S : SFI) return Time_Stamp_Type;

   procedure Set_Keyword_Casing    (S : SFI; C : Casing_Type);
   procedure Set_Identifier_Casing (S : SFI; C : Casing_Type);
   procedure Set_License           (S : SFI; L : License_Type);
   procedure Set_Unit              (S : SFI; U : Unit_Number_Type);

   function Last_Source_File return Source_File_Index;
   --  Index of last source file table entry

   function Num_Source_Files return Nat;
   --  Number of source file table entries

   procedure Initialize;
   --  Initialize internal tables

   procedure Lock;
   --  Lock internal tables

   procedure Unlock;
   --  Unlock internal tables

   Main_Source_File : Source_File_Index := No_Source_File;
   --  This is set to the source file index of the main unit

   -----------------------------
   -- Source_File_Index_Table --
   -----------------------------

   --  The Get_Source_File_Index function is called very frequently. Earlier
   --  versions cached a single entry, but then reverted to a serial search,
   --  and this proved to be a significant source of inefficiency. We then
   --  switched to using a table with a start point followed by a serial
   --  search. Now we make sure source buffers are on a reasonable boundary
   --  (see Types.Source_Align), and we can just use a direct look up in the
   --  following table.

   --  Note that this array is pretty large, but in most operating systems
   --  it will not be allocated in physical memory unless it is actually used.

   Source_File_Index_Table :
     array (Int range 0 .. 1 + (Int'Last / Source_Align)) of Source_File_Index;

   procedure Set_Source_File_Index_Table (Xnew : Source_File_Index);
   --  Sets entries in the Source_File_Index_Table for the newly created
   --  Source_File table entry whose index is Xnew. The Source_First and
   --  Source_Last fields of this entry must be set before the call.

   -----------------------
   -- Checksum Handling --
   -----------------------

   --  As a source file is scanned, a checksum is computed by taking all the
   --  non-blank characters in the file, excluding comment characters, the
   --  minus-minus sequence starting a comment, and all control characters
   --  except ESC.

   --  The checksum algorithm used is the standard CRC-32 algorithm, as
   --  implemented by System.CRC32, except that we do not bother with the
   --  final XOR with all 1 bits.

   --  This algorithm ensures that the checksum includes all semantically
   --  significant aspects of the program represented by the source file,
   --  but is insensitive to layout, presence or contents of comments, wide
   --  character representation method, or casing conventions outside strings.

   --  Scans.Checksum is initialized appropriately at the start of scanning
   --  a file, and copied into the Source_Checksum field of the file table
   --  entry when the end of file is encountered.

   -------------------------------------
   -- Handling Generic Instantiations --
   -------------------------------------

   --  As described in Sem_Ch12, a generic instantiation involves making a
   --  copy of the tree of the generic template. The source locations in
   --  this tree directly reference the source of the template. However it
   --  is also possible to find the location of the instantiation.

   --  This is achieved as follows. When an instantiation occurs, a new entry
   --  is made in the source file table. This entry points to the same source
   --  text, i.e. the file that contains the instantiation, but has a distinct
   --  set of Source_Ptr index values. The separate range of Sloc values avoids
   --  confusion, and means that the Sloc values can still be used to uniquely
   --  identify the source file table entry. It is possible for both entries
   --  to point to the same text, because of the virtual origin pointers used
   --  in the source table.

   --  The Instantiation_Id field of this source file index entry, set
   --  to No_Instance_Id for normal entries, instead contains a value that
   --  uniquely identifies a particular instantiation, and the associated
   --  entry in the Instances table. The source location of the instantiation
   --  can be retrieved using function Instantiation below. In the case of
   --  nested instantiations, the Instances table can be used to trace the
   --  complete chain of nested instantiations.

   --  Two routines are used to build the special instance entries in the
   --  source file table. Create_Instantiation_Source is first called to build
   --  the virtual source table entry for the instantiation, and then the
   --  Sloc values in the copy are adjusted using Adjust_Instantiation_Sloc.
   --  See child unit Sinput.L for details on these two routines.

   generic
      with procedure Process (Id : Instance_Id; Inst_Sloc : Source_Ptr);
   procedure Iterate_On_Instances;
   --  Execute Process for each entry in the instance table

   function Instantiation (S : SFI) return Source_Ptr;
   --  For a source file entry that represents an inlined body, source location
   --  of the inlined call. Otherwise, for a source file entry that represents
   --  a generic instantiation, source location of the instantiation. Returns
   --  No_Location in all other cases.

   -----------------
   -- Global Data --
   -----------------

   Current_Source_File : Source_File_Index := No_Source_File;
   --  Source_File table index of source file currently being scanned.
   --  Initialized so that some tools (such as gprbuild) can be built with
   --  -gnatVa and pragma Initialized_Scalars without problems.

   Current_Source_Unit : Unit_Number_Type;
   --  Unit number of source file currently being scanned. The special value
   --  of No_Unit indicates that the configuration pragma file is currently
   --  being scanned (this has no entry in the unit table).

   Source_gnat_adc : Source_File_Index := No_Source_File;
   --  This is set if a gnat.adc file is present to reference this file

   Source : Source_Buffer_Ptr;
   --  Current source (copy of Source_File.Table (Current_Source_Unit).Source)

   Internal_Source : aliased Source_Buffer (1 .. 81);
   --  This buffer is used internally in the compiler when the lexical analyzer
   --  is used to scan a string from within the compiler. The procedure is to
   --  establish Internal_Source_Ptr as the value of Source, set the string to
   --  be scanned, appropriately terminated, in this buffer, and set Scan_Ptr
   --  to point to the start of the buffer. It is a fatal error if the scanner
   --  signals an error while scanning a token in this internal buffer.

   Internal_Source_Ptr : constant Source_Buffer_Ptr :=
                           Internal_Source'Unrestricted_Access;
   --  Pointer to internal source buffer

   -----------------------------------------
   -- Handling of Source Line Terminators --
   -----------------------------------------

   --  In this section we discuss in detail the issue of terminators used to
   --  terminate source lines. The RM says that one or more format effectors
   --  (other than horizontal tab) end a source line, and defines the set of
   --  such format effectors, but does not talk about exactly how they are
   --  represented in the source program (since in general the RM is not in
   --  the business of specifying source program formats).

   --  The type Types.Line_Terminator is defined as a subtype of Character
   --  that includes CR/LF/VT/FF. The most common line enders in practice
   --  are CR (some MAC systems), LF (Unix systems), and CR/LF (DOS/Windows
   --  systems). Any of these sequences is recognized as ending a physical
   --  source line, and if multiple such terminators appear (e.g. LF/LF),
   --  then we consider we have an extra blank line.

   --  VT and FF are recognized as terminating source lines, but they are
   --  considered to end a logical line instead of a physical line, so that
   --  the line numbering ignores such terminators. The use of VT and FF is
   --  mandated by the standard, and correctly handled in a conforming manner
   --  by GNAT, but their use is not recommended.

   --  In addition to the set of characters defined by the type in Types, in
   --  wide character encoding, then the codes returning True for a call to
   --  System.UTF_32.Is_UTF_32_Line_Terminator are also recognized as ending a
   --  source line. This includes the standard codes defined above in addition
   --  to NEL (NEXT LINE), LINE SEPARATOR and PARAGRAPH SEPARATOR. Again, as in
   --  the case of VT and FF, the standard requires we recognize these as line
   --  terminators, but we consider them to be logical line terminators. The
   --  only physical line terminators recognized are the standard ones (CR,
   --  LF, or CR/LF).

   --  However, we do not recognize the NEL (16#85#) character as having the
   --  significance of an end of line character when operating in normal 8-bit
   --  Latin-n input mode for the compiler. Instead the rule in this mode is
   --  that all upper half control codes (16#80# .. 16#9F#) are illegal if they
   --  occur in program text, and are ignored if they appear in comments.

   --  First, note that this behavior is fully conforming with the standard.
   --  The standard has nothing whatever to say about source representation
   --  and implementations are completely free to make there own rules. In
   --  this case, in 8-bit mode, GNAT decides that the 16#0085# character is
   --  not a representation of the NEL character, even though it looks like it.
   --  If you have NEL's in your program, which you expect to be treated as
   --  end of line characters, you must use a wide character encoding such as
   --  UTF-8 for this code to be recognized.

   --  Second, an explanation of why we take this slightly surprising choice.
   --  We have never encountered anyone actually using the NEL character to
   --  end lines. One user raised the issue as a result of some experiments,
   --  but no one has ever submitted a program encoded this way, in any of
   --  the possible encodings. It seems that even when using wide character
   --  codes extensively, the normal approach is to use standard line enders
   --  (LF or CR/LF). So the failure to recognize NEL in this mode seems to
   --  have no practical downside.

   --  Moreover, what we have seen in a significant number of programs from
   --  multiple sources is the practice of writing all program text in lower
   --  half (ASCII) form, but using UTF-8 encoded wide characters freely in
   --  comments, where the comments are terminated by normal line endings
   --  (LF or CR/LF). The comments do not contain NEL codes, but they can and
   --  do contain other UTF-8 encoding sequences where one of the bytes is the
   --  NEL code. Now such programs can of course be compiled in UTF-8 mode,
   --  but in practice they also compile fine in standard 8-bit mode without
   --  specifying a character encoding. Since this is common practice, it would
   --  be a signficant upwards incompatibility to recognize NEL in 8-bit mode.

   -----------------
   -- Subprograms --
   -----------------

   procedure Backup_Line (P : in out Source_Ptr);
   --  Back up the argument pointer to the start of the previous line. On
   --  entry, P points to the start of a physical line in the source buffer.
   --  On return, P is updated to point to the start of the previous line.
   --  The caller has checked that a Line_Terminator character precedes P so
   --  that there definitely is a previous line in the source buffer.

   procedure Build_Location_String (Loc : Source_Ptr);
   --  This function builds a string literal of the form "name:line", where
   --  name is the file name corresponding to Loc, and line is the line number.
   --  In the event that instantiations are involved, additional suffixes of
   --  the same form are appended after the separating string " instantiated at
   --  ". The returned string is appended to the Name_Buffer, terminated by
   --  ASCII.NUL, with Name_Length indicating the length not including the
   --  terminating Nul.

   function Build_Location_String (Loc : Source_Ptr) return String;
   --  Functional form returning a string, which does not include a terminating
   --  null character. The contents of Name_Buffer is destroyed.

   procedure Check_For_BOM;
   --  Check if the current source starts with a BOM. Scan_Ptr needs to be at
   --  the start of the current source. If the current source starts with a
   --  recognized BOM, then some flags such as Wide_Character_Encoding_Method
   --  are set accordingly, and the Scan_Ptr on return points past this BOM.
   --  An error message is output and Unrecoverable_Error raised if a non-
   --  recognized BOM is detected. The call has no effect if no BOM is found.

   function Get_Column_Number (P : Source_Ptr) return Column_Number;
   --  The ones-origin column number of the specified Source_Ptr value is
   --  determined and returned. Tab characters if present are assumed to
   --  represent the standard 1,9,17.. spacing pattern.

   function Get_Logical_Line_Number
     (P : Source_Ptr) return Logical_Line_Number;
   --  The line number of the specified source position is obtained by
   --  doing a binary search on the source positions in the lines table
   --  for the unit containing the given source position. The returned
   --  value is the logical line number, already adjusted for the effect
   --  of source reference pragmas. If P refers to the line of a source
   --  reference pragma itself, then No_Line is returned. If no source
   --  reference pragmas have been encountered, the value returned is
   --  the same as the physical line number.

   function Get_Logical_Line_Number_Img
     (P : Source_Ptr) return String;
   --  Same as above function, but returns the line number as a string of
   --  decimal digits, with no leading space. Destroys Name_Buffer.

   function Get_Physical_Line_Number
     (P : Source_Ptr) return Physical_Line_Number;
   --  The line number of the specified source position is obtained by
   --  doing a binary search on the source positions in the lines table
   --  for the unit containing the given source position. The returned
   --  value is the physical line number in the source being compiled.

   function Get_Source_File_Index (S : Source_Ptr) return Source_File_Index;
   pragma Inline (Get_Source_File_Index);
   --  Return file table index of file identified by given source pointer
   --  value. This call must always succeed, since any valid source pointer
   --  value belongs to some previously loaded source file.

   function Instantiation_Depth (S : Source_Ptr) return Nat;
   --  Determine instantiation depth for given Sloc value. A value of
   --  zero means that the given Sloc is not in an instantiation.

   function Line_Start (P : Source_Ptr) return Source_Ptr;
   --  Finds the source position of the start of the line containing the
   --  given source location.

   function Line_Start
     (L : Physical_Line_Number;
      S : Source_File_Index) return Source_Ptr;
   --  Finds the source position of the start of the given line in the
   --  given source file, using a physical line number to identify the line.

   function Num_Source_Lines (S : Source_File_Index) return Nat;
   --  Returns the number of source lines (this is equivalent to reading
   --  the value of Last_Source_Line, but returns Nat rather than a
   --  physical line number.

   procedure Register_Source_Ref_Pragma
     (File_Name          : File_Name_Type;
      Stripped_File_Name : File_Name_Type;
      Mapped_Line        : Nat;
      Line_After_Pragma  : Physical_Line_Number);
   --  Register a source reference pragma, the parameter File_Name is the
   --  file name from the pragma, and Stripped_File_Name is this name with
   --  the directory information stripped. Both these parameters are set
   --  to No_Name if no file name parameter was given in the pragma.
   --  (which can only happen for the second and subsequent pragmas).
   --  Mapped_Line is the line number parameter from the pragma, and
   --  Line_After_Pragma is the physical line number of the line that
   --  follows the line containing the Source_Reference pragma.

   function Original_Location (S : Source_Ptr) return Source_Ptr;
   --  Given a source pointer S, returns the corresponding source pointer
   --  value ignoring instantiation copies. For locations that do not
   --  correspond to instantiation copies of templates, the argument is
   --  returned unchanged. For locations that do correspond to copies of
   --  templates from instantiations, the location within the original
   --  template is returned. This is useful in canonicalizing locations.

   function Instantiation_Location (S : Source_Ptr) return Source_Ptr;
   pragma Inline (Instantiation_Location);
   --  Given a source pointer S, returns the corresponding source pointer
   --  value of the instantiation if this location is within an instance.
   --  If S is not within an instance, then this returns No_Location.

   function Top_Level_Location (S : Source_Ptr) return Source_Ptr;
   --  Given a source pointer S, returns the argument unchanged if it is
   --  not in an instantiation. If S is in an instantiation, then it returns
   --  the location of the top level instantiation, i.e. the outer level
   --  instantiation in the nested case.

   function Physical_To_Logical
     (Line : Physical_Line_Number;
      S    : Source_File_Index) return Logical_Line_Number;
   --  Given a physical line number in source file whose source index is S,
   --  return the corresponding logical line number. If the physical line
   --  number is one containing a Source_Reference pragma, the result will
   --  be No_Line_Number.

   procedure Skip_Line_Terminators
     (P        : in out Source_Ptr;
      Physical : out Boolean);
   --  On entry, P points to a line terminator that has been encountered,
   --  which is one of FF,LF,VT,CR or a wide character sequence whose value is
   --  in category Separator,Line or Separator,Paragraph. P points just past
   --  the character that was scanned. The purpose of this routine is to
   --  distinguish physical and logical line endings. A physical line ending
   --  is one of:
   --
   --     CR on its own (MAC System 7)
   --     LF on its own (Unix and unix-like systems)
   --     CR/LF (DOS, Windows)
   --     Wide character in Separator,Line or Separator,Paragraph category
   --
   --     Note: we no longer recognize LF/CR (which we did in some earlier
   --     versions of GNAT. The reason for this is that this sequence is not
   --     used and recognizing it generated confusion. For example given the
   --     sequence LF/CR/LF we were interpreting that as (LF/CR) ending the
   --     first line and a blank line ending with CR following, but it is
   --     clearly better to interpret this as LF, with a blank line terminated
   --     by CR/LF, given that LF and CR/LF are both in common use, but no
   --     system we know of uses LF/CR.
   --
   --  A logical line ending (that is not a physical line ending) is one of:
   --
   --     VT on its own
   --     FF on its own
   --
   --  On return, P is bumped past the line ending sequence (one of the above
   --  seven possibilities). Physical is set to True to indicate that a
   --  physical end of line was encountered, in which case this routine also
   --  makes sure that the lines table for the current source file has an
   --  appropriate entry for the start of the new physical line.

   procedure Sloc_Range (N : Node_Id; Min, Max : out Source_Ptr);
   --  Given a node, returns the minimum and maximum source locations of any
   --  node in the syntactic subtree for the node. This is not quite the same
   --  as the locations of the first and last token in the node construct
   --  because parentheses at the outer level do not have a recorded Sloc.
   --
   --  Note: At each step of the tree traversal, we make sure to go back to
   --  the Original_Node, since this function is concerned about original
   --  (source) locations.
   --
   --  Note: if the tree for the expression contains no "real" Sloc values,
   --  i.e. values > No_Location, then both Min and Max are set to
   --  Sloc (Original_Node (N)).

   function Source_Offset (S : Source_Ptr) return Nat;
   --  Returns the zero-origin offset of the given source location from the
   --  start of its corresponding unit. This is used for creating canonical
   --  names in some situations.

   procedure Write_Location (P : Source_Ptr);
   --  Writes out a string of the form fff:nn:cc, where fff, nn, cc are the
   --  file name, line number and column corresponding to the given source
   --  location. No_Location and Standard_Location appear as the strings
   --  <no location> and <standard location>. If the location is within an
   --  instantiation, then the instance location is appended, enclosed in
   --  square brackets (which can nest if necessary). Note that this routine
   --  is used only for internal compiler debugging output purposes (which
   --  is why the somewhat cryptic use of brackets is acceptable).

   procedure wl (P : Source_Ptr);
   pragma Export (Ada, wl);
   --  Equivalent to Write_Location (P); Write_Eol; for calls from GDB

   procedure Write_Time_Stamp (S : Source_File_Index);
   --  Writes time stamp of specified file in YY-MM-DD HH:MM.SS format

   procedure Tree_Read;
   --  Initializes internal tables from current tree file using the relevant
   --  Table.Tree_Read routines.

   procedure Tree_Write;
   --  Writes out internal tables to current tree file using the relevant
   --  Table.Tree_Write routines.

private
   pragma Inline (File_Name);
   pragma Inline (Full_File_Name);
   pragma Inline (File_Type);
   pragma Inline (Reference_Name);
   pragma Inline (Full_Ref_Name);
   pragma Inline (Debug_Source_Name);
   pragma Inline (Full_Debug_Name);
   pragma Inline (Instance);
   pragma Inline (License);
   pragma Inline (Num_SRef_Pragmas);
   pragma Inline (First_Mapped_Line);
   pragma Inline (Source_Text);
   pragma Inline (Source_First);
   pragma Inline (Source_Last);
   pragma Inline (Time_Stamp);
   pragma Inline (Source_Checksum);
   pragma Inline (Last_Source_Line);
   pragma Inline (Keyword_Casing);
   pragma Inline (Identifier_Casing);
   pragma Inline (Inlined_Call);
   pragma Inline (Inlined_Body);
   pragma Inline (Template);
   pragma Inline (Unit);

   pragma Inline (Set_Keyword_Casing);
   pragma Inline (Set_Identifier_Casing);

   pragma Inline (Last_Source_File);
   pragma Inline (Num_Source_Files);
   pragma Inline (Num_Source_Lines);

   No_Instance_Id : constant Instance_Id := 0;

   -------------------------
   -- Source_Lines Tables --
   -------------------------

   type Lines_Table_Type is
     array (Physical_Line_Number) of Source_Ptr;
   --  Type used for lines table. The entries are indexed by physical line
   --  numbers. The values are the starting Source_Ptr values for the start
   --  of the corresponding physical line. Note that we make this a bogus
   --  big array, sized as required, so that we avoid the use of fat pointers.

   type Lines_Table_Ptr is access all Lines_Table_Type;
   --  Type used for pointers to line tables

   type Logical_Lines_Table_Type is
     array (Physical_Line_Number) of Logical_Line_Number;
   --  Type used for logical lines table. This table is used if a source
   --  reference pragma is present. It is indexed by physical line numbers,
   --  and contains the corresponding logical line numbers. An entry that
   --  corresponds to a source reference pragma is set to No_Line_Number.
   --  Note that we make this a bogus big array, sized as required, so that
   --  we avoid the use of fat pointers.

   type Logical_Lines_Table_Ptr is access all Logical_Lines_Table_Type;
   --  Type used for pointers to logical line tables

   -----------------------
   -- Source_File Table --
   -----------------------

   --  See earlier descriptions for meanings of public fields

   type Source_File_Record is record
      File_Name         : File_Name_Type;
      Reference_Name    : File_Name_Type;
      Debug_Source_Name : File_Name_Type;
      Full_Debug_Name   : File_Name_Type;
      Full_File_Name    : File_Name_Type;
      Full_Ref_Name     : File_Name_Type;
      Instance          : Instance_Id;
      Num_SRef_Pragmas  : Nat;
      First_Mapped_Line : Logical_Line_Number;
      Source_Text       : Source_Buffer_Ptr;
      Source_First      : Source_Ptr;
      Source_Last       : Source_Ptr;
      Source_Checksum   : Word;
      Last_Source_Line  : Physical_Line_Number;
      Template          : Source_File_Index;
      Unit              : Unit_Number_Type;
      Time_Stamp        : Time_Stamp_Type;
      File_Type         : Type_Of_File;
      Inlined_Call      : Source_Ptr;
      Inlined_Body      : Boolean;
      License           : License_Type;
      Keyword_Casing    : Casing_Type;
      Identifier_Casing : Casing_Type;

      --  The following fields are for internal use only (i.e. only in the
      --  body of Sinput or its children, with no direct access by clients).

      Sloc_Adjust : Source_Ptr;
      --  A value to be added to Sloc values for this file to reference the
      --  corresponding lines table. This is zero for the non-instantiation
      --  case, and set so that the addition references the ultimate template
      --  for the instantiation case. See Sinput-L for further details.

      Lines_Table : Lines_Table_Ptr;
      --  Pointer to lines table for this source. Updated as additional
      --  lines are accessed using the Skip_Line_Terminators procedure.
      --  Note: the lines table for an instantiation entry refers to the
      --  original line numbers of the template see Sinput-L for details.

      Logical_Lines_Table : Logical_Lines_Table_Ptr;
      --  Pointer to logical lines table for this source. Non-null only if
      --  a source reference pragma has been processed. Updated as lines
      --  are accessed using the Skip_Line_Terminators procedure.

      Lines_Table_Max : Physical_Line_Number;
      --  Maximum subscript values for currently allocated Lines_Table
      --  and (if present) the allocated Logical_Lines_Table. The value
      --  Max_Source_Line gives the maximum used value, this gives the
      --  maximum allocated value.

   end record;

   --  The following representation clause ensures that the above record
   --  has no holes. We do this so that when instances of this record are
   --  written by Tree_Gen, we do not write uninitialized values to the file.

   AS : constant Pos := Standard'Address_Size;

   for Source_File_Record use record
      File_Name           at  0 range 0 .. 31;
      Reference_Name      at  4 range 0 .. 31;
      Debug_Source_Name   at  8 range 0 .. 31;
      Full_Debug_Name     at 12 range 0 .. 31;
      Full_File_Name      at 16 range 0 .. 31;
      Full_Ref_Name       at 20 range 0 .. 31;
      Instance            at 48 range 0 .. 31;
      Num_SRef_Pragmas    at 24 range 0 .. 31;
      First_Mapped_Line   at 28 range 0 .. 31;
      Source_First        at 32 range 0 .. 31;
      Source_Last         at 36 range 0 .. 31;
      Source_Checksum     at 40 range 0 .. 31;
      Last_Source_Line    at 44 range 0 .. 31;
      Template            at 52 range 0 .. 31;
      Unit                at 56 range 0 .. 31;
      Time_Stamp          at 60 range 0 .. 8 * Time_Stamp_Length - 1;
      File_Type           at 74 range 0 .. 7;
      Inlined_Call        at 88 range 0 .. 31;
      Inlined_Body        at 75 range 0 .. 7;
      License             at 76 range 0 .. 7;
      Keyword_Casing      at 77 range 0 .. 7;
      Identifier_Casing   at 78 range 0 .. 15;
      Sloc_Adjust         at 80 range 0 .. 31;
      Lines_Table_Max     at 84 range 0 .. 31;

      --  The following fields are pointers, so we have to specialize their
      --  lengths using pointer size, obtained above as Standard'Address_Size.

      Source_Text         at 92 range 0      .. AS - 1;
      Lines_Table         at 92 range AS     .. AS * 2 - 1;
      Logical_Lines_Table at 92 range AS * 2 .. AS * 3 - 1;
   end record;

   for Source_File_Record'Size use 92 * 8 + AS * 3;
   --  This ensures that we did not leave out any fields

   package Source_File is new Table.Table (
     Table_Component_Type => Source_File_Record,
     Table_Index_Type     => Source_File_Index,
     Table_Low_Bound      => 1,
     Table_Initial        => Alloc.Source_File_Initial,
     Table_Increment      => Alloc.Source_File_Increment,
     Table_Name           => "Source_File");

   --  Auxiliary table containing source location of instantiations. Index 0
   --  is used for code that does not come from an instance.

   package Instances is new Table.Table (
     Table_Component_Type => Source_Ptr,
     Table_Index_Type     => Instance_Id,
     Table_Low_Bound      => 0,
     Table_Initial        => Alloc.Source_File_Initial,
     Table_Increment      => Alloc.Source_File_Increment,
     Table_Name           => "Instances");

   -----------------
   -- Subprograms --
   -----------------

   procedure Alloc_Line_Tables
     (S       : in out Source_File_Record;
      New_Max : Nat);
   --  Allocate or reallocate the lines table for the given source file so
   --  that it can accommodate at least New_Max lines. Also allocates or
   --  reallocates logical lines table if source ref pragmas are present.

   procedure Add_Line_Tables_Entry
     (S : in out Source_File_Record;
      P : Source_Ptr);
   --  Increment line table size by one (reallocating the lines table if
   --  needed) and set the new entry to contain the value P. Also bumps
   --  the Source_Line_Count field. If source reference pragmas are
   --  present, also increments logical lines table size by one, and
   --  sets new entry.

   procedure Trim_Lines_Table (S : Source_File_Index);
   --  Set lines table size for entry S in the source file table to
   --  correspond to the current value of Num_Source_Lines, releasing
   --  any unused storage. This is used by Sinput.L and Sinput.D.

end Sinput;