/* Inlining decision heuristics.
Copyright (C) 2003-2014 Free Software Foundation, Inc.
Contributed by Jan Hubicka
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
. */
/* Inlining decision heuristics
The implementation of inliner is organized as follows:
inlining heuristics limits
can_inline_edge_p allow to check that particular inlining is allowed
by the limits specified by user (allowed function growth, growth and so
on).
Functions are inlined when it is obvious the result is profitable (such
as functions called once or when inlining reduce code size).
In addition to that we perform inlining of small functions and recursive
inlining.
inlining heuristics
The inliner itself is split into two passes:
pass_early_inlining
Simple local inlining pass inlining callees into current function.
This pass makes no use of whole unit analysis and thus it can do only
very simple decisions based on local properties.
The strength of the pass is that it is run in topological order
(reverse postorder) on the callgraph. Functions are converted into SSA
form just before this pass and optimized subsequently. As a result, the
callees of the function seen by the early inliner was already optimized
and results of early inlining adds a lot of optimization opportunities
for the local optimization.
The pass handle the obvious inlining decisions within the compilation
unit - inlining auto inline functions, inlining for size and
flattening.
main strength of the pass is the ability to eliminate abstraction
penalty in C++ code (via combination of inlining and early
optimization) and thus improve quality of analysis done by real IPA
optimizers.
Because of lack of whole unit knowledge, the pass can not really make
good code size/performance tradeoffs. It however does very simple
speculative inlining allowing code size to grow by
EARLY_INLINING_INSNS when callee is leaf function. In this case the
optimizations performed later are very likely to eliminate the cost.
pass_ipa_inline
This is the real inliner able to handle inlining with whole program
knowledge. It performs following steps:
1) inlining of small functions. This is implemented by greedy
algorithm ordering all inlinable cgraph edges by their badness and
inlining them in this order as long as inline limits allows doing so.
This heuristics is not very good on inlining recursive calls. Recursive
calls can be inlined with results similar to loop unrolling. To do so,
special purpose recursive inliner is executed on function when
recursive edge is met as viable candidate.
2) Unreachable functions are removed from callgraph. Inlining leads
to devirtualization and other modification of callgraph so functions
may become unreachable during the process. Also functions declared as
extern inline or virtual functions are removed, since after inlining
we no longer need the offline bodies.
3) Functions called once and not exported from the unit are inlined.
This should almost always lead to reduction of code size by eliminating
the need for offline copy of the function. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "tree.h"
#include "trans-mem.h"
#include "calls.h"
#include "tree-inline.h"
#include "langhooks.h"
#include "flags.h"
#include "diagnostic.h"
#include "gimple-pretty-print.h"
#include "params.h"
#include "fibheap.h"
#include "intl.h"
#include "tree-pass.h"
#include "coverage.h"
#include "rtl.h"
#include "bitmap.h"
#include "basic-block.h"
#include "tree-ssa-alias.h"
#include "internal-fn.h"
#include "gimple-expr.h"
#include "is-a.h"
#include "gimple.h"
#include "gimple-ssa.h"
#include "ipa-prop.h"
#include "basic-block.h"
#include "toplev.h"
#include "dbgcnt.h"
#include "except.h"
#include "l-ipo.h"
#include "target.h"
#include "ipa-inline.h"
#include "ipa-utils.h"
#include "auto-profile.h"
#include "sreal.h"
#include "cilk.h"
/* Statistics we collect about inlining algorithm. */
static int overall_size;
static gcov_type max_count;
static sreal max_count_real, max_relbenefit_real, half_int_min_real;
/* Global variable to denote if it is in ipa-inline pass. */
bool is_in_ipa_inline = false;
/* Return false when inlining edge E would lead to violating
limits on function unit growth or stack usage growth.
The relative function body growth limit is present generally
to avoid problems with non-linear behavior of the compiler.
To allow inlining huge functions into tiny wrapper, the limit
is always based on the bigger of the two functions considered.
For stack growth limits we always base the growth in stack usage
of the callers. We want to prevent applications from segfaulting
on stack overflow when functions with huge stack frames gets
inlined. */
static bool
caller_growth_limits (struct cgraph_edge *e)
{
struct cgraph_node *to = e->caller;
struct cgraph_node *what = cgraph_function_or_thunk_node (e->callee, NULL);
int newsize;
int limit = 0;
HOST_WIDE_INT stack_size_limit = 0, inlined_stack;
struct inline_summary *info, *what_info, *outer_info = inline_summary (to);
/* Look for function e->caller is inlined to. While doing
so work out the largest function body on the way. As
described above, we want to base our function growth
limits based on that. Not on the self size of the
outer function, not on the self size of inline code
we immediately inline to. This is the most relaxed
interpretation of the rule "do not grow large functions
too much in order to prevent compiler from exploding". */
while (true)
{
info = inline_summary (to);
if (limit < info->self_size)
limit = info->self_size;
if (stack_size_limit < info->estimated_self_stack_size)
stack_size_limit = info->estimated_self_stack_size;
if (to->global.inlined_to)
to = to->callers->caller;
else
break;
}
what_info = inline_summary (what);
if (limit < what_info->self_size)
limit = what_info->self_size;
limit += limit * PARAM_VALUE (PARAM_LARGE_FUNCTION_GROWTH) / 100;
/* Check the size after inlining against the function limits. But allow
the function to shrink if it went over the limits by forced inlining. */
newsize = estimate_size_after_inlining (to, e);
if (newsize >= info->size
&& newsize > PARAM_VALUE (PARAM_LARGE_FUNCTION_INSNS)
&& newsize > limit)
{
e->inline_failed = CIF_LARGE_FUNCTION_GROWTH_LIMIT;
return false;
}
if (!what_info->estimated_stack_size)
return true;
/* FIXME: Stack size limit often prevents inlining in Fortran programs
due to large i/o datastructures used by the Fortran front-end.
We ought to ignore this limit when we know that the edge is executed
on every invocation of the caller (i.e. its call statement dominates
exit block). We do not track this information, yet. */
stack_size_limit += ((gcov_type)stack_size_limit
* PARAM_VALUE (PARAM_STACK_FRAME_GROWTH) / 100);
inlined_stack = (outer_info->estimated_stack_size
+ what_info->estimated_stack_size);
/* Check new stack consumption with stack consumption at the place
stack is used. */
if (inlined_stack > stack_size_limit
/* If function already has large stack usage from sibling
inline call, we can inline, too.
This bit overoptimistically assume that we are good at stack
packing. */
&& inlined_stack > info->estimated_stack_size
&& inlined_stack > PARAM_VALUE (PARAM_LARGE_STACK_FRAME))
{
e->inline_failed = CIF_LARGE_STACK_FRAME_GROWTH_LIMIT;
return false;
}
return true;
}
/* Dump info about why inlining has failed. */
static void
report_inline_failed_reason (struct cgraph_edge *e)
{
if (dump_file)
{
fprintf (dump_file, " not inlinable: %s/%i -> %s/%i, %s\n",
xstrdup (e->caller->name ()), e->caller->order,
xstrdup (e->callee->name ()), e->callee->order,
cgraph_inline_failed_string (e->inline_failed));
}
}
/* Decide whether sanitizer-related attributes allow inlining. */
static bool
sanitize_attrs_match_for_inline_p (const_tree caller, const_tree callee)
{
/* Don't care if sanitizer is disabled */
if (!(flag_sanitize & SANITIZE_ADDRESS))
return true;
if (!caller || !callee)
return true;
return !!lookup_attribute ("no_sanitize_address",
DECL_ATTRIBUTES (caller)) ==
!!lookup_attribute ("no_sanitize_address",
DECL_ATTRIBUTES (callee));
}
/* Decide if we can inline the edge and possibly update
inline_failed reason.
We check whether inlining is possible at all and whether
caller growth limits allow doing so.
if REPORT is true, output reason to the dump file.
if DISREGARD_LIMITS is true, ignore size limits.*/
static bool
can_inline_edge_p (struct cgraph_edge *e, bool report,
bool disregard_limits = false)
{
bool inlinable = true;
enum availability avail;
struct cgraph_node *callee
= cgraph_function_or_thunk_node (e->callee, &avail);
tree caller_tree = DECL_FUNCTION_SPECIFIC_OPTIMIZATION (e->caller->decl);
tree callee_tree
= callee ? DECL_FUNCTION_SPECIFIC_OPTIMIZATION (callee->decl) : NULL;
struct function *caller_cfun = DECL_STRUCT_FUNCTION (e->caller->decl);
struct function *callee_cfun
= callee ? DECL_STRUCT_FUNCTION (callee->decl) : NULL;
if (!caller_cfun && e->caller->clone_of)
caller_cfun = DECL_STRUCT_FUNCTION (e->caller->clone_of->decl);
if (!callee_cfun && callee && callee->clone_of)
callee_cfun = DECL_STRUCT_FUNCTION (callee->clone_of->decl);
gcc_assert (e->inline_failed);
if (!callee || !callee->definition)
{
e->inline_failed = CIF_BODY_NOT_AVAILABLE;
inlinable = false;
}
else if (callee->calls_comdat_local)
{
e->inline_failed = CIF_USES_COMDAT_LOCAL;
inlinable = false;
}
else if (!inline_summary (callee)->inlinable
|| (caller_cfun && fn_contains_cilk_spawn_p (caller_cfun)))
{
e->inline_failed = CIF_FUNCTION_NOT_INLINABLE;
inlinable = false;
}
else if (avail <= AVAIL_OVERWRITABLE)
{
e->inline_failed = CIF_OVERWRITABLE;
inlinable = false;
}
else if (e->call_stmt_cannot_inline_p)
{
if (e->inline_failed != CIF_FUNCTION_NOT_OPTIMIZED)
e->inline_failed = CIF_MISMATCHED_ARGUMENTS;
inlinable = false;
}
/* Don't inline if the functions have different EH personalities. */
else if (DECL_FUNCTION_PERSONALITY (e->caller->decl)
&& DECL_FUNCTION_PERSONALITY (callee->decl)
&& (DECL_FUNCTION_PERSONALITY (e->caller->decl)
!= DECL_FUNCTION_PERSONALITY (callee->decl)))
{
e->inline_failed = CIF_EH_PERSONALITY;
inlinable = false;
}
/* TM pure functions should not be inlined into non-TM_pure
functions. */
else if (is_tm_pure (callee->decl)
&& !is_tm_pure (e->caller->decl))
{
e->inline_failed = CIF_UNSPECIFIED;
inlinable = false;
}
/* Don't inline if the callee can throw non-call exceptions but the
caller cannot.
FIXME: this is obviously wrong for LTO where STRUCT_FUNCTION is missing.
Move the flag into cgraph node or mirror it in the inline summary. */
else if (callee_cfun && callee_cfun->can_throw_non_call_exceptions
&& !(caller_cfun && caller_cfun->can_throw_non_call_exceptions))
{
e->inline_failed = CIF_NON_CALL_EXCEPTIONS;
inlinable = false;
}
/* Check compatibility of target optimization options. */
else if (!targetm.target_option.can_inline_p (e->caller->decl,
callee->decl))
{
e->inline_failed = CIF_TARGET_OPTION_MISMATCH;
inlinable = false;
}
/* Don't inline a function with mismatched sanitization attributes. */
else if (!sanitize_attrs_match_for_inline_p (e->caller->decl, callee->decl))
{
e->inline_failed = CIF_ATTRIBUTE_MISMATCH;
inlinable = false;
}
/* Check if caller growth allows the inlining. */
else if (!DECL_DISREGARD_INLINE_LIMITS (callee->decl)
&& !disregard_limits
&& !lookup_attribute ("flatten",
DECL_ATTRIBUTES
(e->caller->global.inlined_to
? e->caller->global.inlined_to->decl
: e->caller->decl))
&& !caller_growth_limits (e))
inlinable = false;
/* Don't inline a function with a higher optimization level than the
caller. FIXME: this is really just tip of iceberg of handling
optimization attribute. */
else if (caller_tree != callee_tree)
{
struct cl_optimization *caller_opt
= TREE_OPTIMIZATION ((caller_tree)
? caller_tree
: optimization_default_node);
struct cl_optimization *callee_opt
= TREE_OPTIMIZATION ((callee_tree)
? callee_tree
: optimization_default_node);
if (((caller_opt->x_optimize > callee_opt->x_optimize)
|| (caller_opt->x_optimize_size != callee_opt->x_optimize_size))
/* gcc.dg/pr43564.c. Look at forced inline even in -O0. */
&& !DECL_DISREGARD_INLINE_LIMITS (e->callee->decl))
{
e->inline_failed = CIF_OPTIMIZATION_MISMATCH;
inlinable = false;
}
}
if (!inlinable && report)
report_inline_failed_reason (e);
return inlinable;
}
/* Return true if the edge E is inlinable during early inlining. */
static bool
can_early_inline_edge_p (struct cgraph_edge *e)
{
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee,
NULL);
/* Early inliner might get called at WPA stage when IPA pass adds new
function. In this case we can not really do any of early inlining
because function bodies are missing. */
if (!gimple_has_body_p (callee->decl))
{
e->inline_failed = CIF_BODY_NOT_AVAILABLE;
return false;
}
/* Skip fake edges */
if (L_IPO_COMP_MODE && !e->call_stmt)
return false;
/* In early inliner some of callees may not be in SSA form yet
(i.e. the callgraph is cyclic and we did not process
the callee by early inliner, yet). We don't have CIF code for this
case; later we will re-do the decision in the real inliner. */
if (!gimple_in_ssa_p (DECL_STRUCT_FUNCTION (e->caller->decl))
|| !gimple_in_ssa_p (DECL_STRUCT_FUNCTION (callee->decl)))
{
if (dump_file)
fprintf (dump_file, " edge not inlinable: not in SSA form\n");
return false;
}
if (!can_inline_edge_p (e, true))
return false;
return true;
}
/* Return number of calls in N. Ignore cheap builtins. */
static int
num_calls (struct cgraph_node *n)
{
struct cgraph_edge *e;
/* The following is buggy -- indirect call is not considered. */
int num = 0;
for (e = n->callees; e; e = e->next_callee)
if (e->call_stmt /* Only exist in profile use pass in LIPO */
&& !is_inexpensive_builtin (e->callee->decl))
num++;
return num;
}
/* Return true if we are interested in inlining small function. */
static bool
want_early_inline_function_p (struct cgraph_edge *e)
{
bool want_inline = true;
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee, NULL);
if (DECL_DISREGARD_INLINE_LIMITS (callee->decl))
;
else if (flag_auto_profile && afdo_callsite_hot_enough_for_early_inline (e))
;
else if (!DECL_DECLARED_INLINE_P (callee->decl)
&& !flag_inline_small_functions)
{
e->inline_failed = CIF_FUNCTION_NOT_INLINE_CANDIDATE;
report_inline_failed_reason (e);
want_inline = false;
}
else
{
int growth = estimate_edge_growth (e);
struct cgraph_node *callee = e->callee;
int n;
if (growth <= PARAM_VALUE (PARAM_EARLY_INLINING_INSNS_ANY))
;
else if (!cgraph_maybe_hot_edge_p (e))
{
if (dump_file)
fprintf (dump_file, " will not early inline: %s/%i->%s/%i, "
"call is cold and code would grow by %i\n",
xstrdup (e->caller->name ()),
e->caller->order,
xstrdup (callee->name ()), callee->order,
growth);
want_inline = false;
}
else if (growth > PARAM_VALUE (PARAM_EARLY_INLINING_INSNS))
{
if (dump_file)
fprintf (dump_file, " will not early inline: %s/%i->%s/%i, "
"growth %i exceeds --param early-inlining-insns\n",
xstrdup (e->caller->name ()),
e->caller->order,
xstrdup (callee->name ()), callee->order,
growth);
want_inline = false;
}
else if (!flag_auto_profile && DECL_COMDAT (callee->decl)
&& growth <= PARAM_VALUE (PARAM_EARLY_INLINING_INSNS_COMDAT))
;
else if ((n = num_calls (callee)) != 0
&& growth * (n + 1) > PARAM_VALUE (PARAM_EARLY_INLINING_INSNS))
{
if (dump_file)
fprintf (dump_file, " will not early inline: %s/%i->%s/%i, "
"growth %i exceeds --param early-inlining-insns "
"divided by number of calls\n",
xstrdup (e->caller->name ()),
e->caller->order,
xstrdup (callee->name ()), callee->order,
growth);
want_inline = false;
}
}
return want_inline;
}
/* Compute time of the edge->caller + edge->callee execution when inlining
does not happen. */
inline gcov_type
compute_uninlined_call_time (struct inline_summary *callee_info,
struct cgraph_edge *edge)
{
gcov_type uninlined_call_time =
RDIV ((gcov_type)callee_info->time * MAX (edge->frequency, 1),
CGRAPH_FREQ_BASE);
gcov_type caller_time = inline_summary (edge->caller->global.inlined_to
? edge->caller->global.inlined_to
: edge->caller)->time;
return uninlined_call_time + caller_time;
}
/* Same as compute_uinlined_call_time but compute time when inlining
does happen. */
inline gcov_type
compute_inlined_call_time (struct cgraph_edge *edge,
int edge_time)
{
gcov_type caller_time = inline_summary (edge->caller->global.inlined_to
? edge->caller->global.inlined_to
: edge->caller)->time;
gcov_type time = (caller_time
+ RDIV (((gcov_type) edge_time
- inline_edge_summary (edge)->call_stmt_time)
* MAX (edge->frequency, 1), CGRAPH_FREQ_BASE));
/* Possible one roundoff error, but watch for overflows. */
gcc_checking_assert (time >= INT_MIN / 2);
if (time < 0)
time = 0;
return time;
}
/* Return true if the speedup for inlining E is bigger than
PARAM_MAX_INLINE_MIN_SPEEDUP. */
static bool
big_speedup_p (struct cgraph_edge *e)
{
gcov_type time = compute_uninlined_call_time (inline_summary (e->callee),
e);
gcov_type inlined_time = compute_inlined_call_time (e,
estimate_edge_time (e));
if (time - inlined_time
> RDIV (time * PARAM_VALUE (PARAM_INLINE_MIN_SPEEDUP), 100))
return true;
return false;
}
/* Returns true if callee of edge E is considered useful to inline
even if it is cold. A callee is considered useful if there is at
least one argument of pointer type with IPA_JF_KNOWN_TYPE or
IPA_JF_UNKNOWN as the jump function. The reasoniong here is that
it is often beneficial to inline bar into foo in the following
code even if the callsite is cold:
void foo () {
A a;
bar (&a);
...
}
This exposes accesses to the 'a' object. The jump function of &a
is either IPA_JF_KNOWN_TYPE or IPA_JF_UNKNOWN (depending on
intervening code). */
static inline bool
useful_cold_callee (struct cgraph_edge *e)
{
gimple call = e->call_stmt;
int n, arg_num = gimple_call_num_args (call);
struct ipa_edge_args *args = IPA_EDGE_REF (e);
if (ipa_node_params_vector.exists ())
{
for (n = 0; n < arg_num; n++)
{
tree arg = gimple_call_arg (call, n);
if (POINTER_TYPE_P (TREE_TYPE (arg)))
{
struct ipa_jump_func *jfunc = ipa_get_ith_jump_func (args, n);
if (jfunc->type == IPA_JF_KNOWN_TYPE
|| jfunc->type == IPA_JF_UNKNOWN)
return true;
}
}
}
return false;
}
/* Returns true if hot caller heuristic should be used. */
static inline bool
enable_hot_caller_heuristic (void)
{
gcov_working_set_t *ws = NULL;
int size_threshold = PARAM_VALUE (PARAM_HOT_CALLER_CODESIZE_THRESHOLD);
int num_counters = 0;
int param_inline_hot_caller = PARAM_VALUE (PARAM_INLINE_HOT_CALLER);
if (param_inline_hot_caller == 0)
return false;
else if (param_inline_hot_caller == 1)
return true;
ws = find_working_set(PARAM_VALUE (HOT_BB_COUNT_WS_PERMILLE));
if (!ws)
return false;
num_counters = ws->num_counters;
return num_counters <= size_threshold;
}
/* Returns true if an edge or its caller are hot enough to
be considered for inlining. */
static bool
edge_hot_enough_p (struct cgraph_edge *edge)
{
static bool use_hot_caller_heuristic = enable_hot_caller_heuristic ();
if (cgraph_maybe_hot_edge_p (edge))
return true;
/* We disable hot-caller heuristic if the callee's entry count is
0 because in this case we do not have enough information to
calculate the scaling factor. */
if (flag_auto_profile && edge->callee->count == 0
&& edge->callee->max_bb_count > 0)
return false;
if (use_hot_caller_heuristic)
{
struct cgraph_node *where = edge->caller;
if (maybe_hot_count_p (NULL, where->max_bb_count))
{
if (PARAM_VALUE (PARAM_INLINE_USEFUL_COLD_CALLEE))
return useful_cold_callee (edge);
else
return true;
}
}
return false;
}
/* Return true if we are interested in inlining small function.
When REPORT is true, report reason to dump file. */
static bool
want_inline_small_function_p (struct cgraph_edge *e, bool report)
{
bool want_inline = true;
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee, NULL);
if (DECL_DISREGARD_INLINE_LIMITS (callee->decl))
;
else if (!DECL_DECLARED_INLINE_P (callee->decl)
&& !flag_inline_small_functions)
{
e->inline_failed = CIF_FUNCTION_NOT_INLINE_CANDIDATE;
want_inline = false;
}
/* Do fast and conservative check if the function can be good
inline cnadidate. At themoment we allow inline hints to
promote non-inline function to inline and we increase
MAX_INLINE_INSNS_SINGLE 16fold for inline functions. */
else if (!DECL_DECLARED_INLINE_P (callee->decl)
&& inline_summary (callee)->min_size - inline_edge_summary (e)->call_stmt_size
> MAX (MAX_INLINE_INSNS_SINGLE, MAX_INLINE_INSNS_AUTO))
{
e->inline_failed = CIF_MAX_INLINE_INSNS_AUTO_LIMIT;
want_inline = false;
}
else if (DECL_DECLARED_INLINE_P (callee->decl)
&& inline_summary (callee)->min_size - inline_edge_summary (e)->call_stmt_size
> 16 * MAX_INLINE_INSNS_SINGLE)
{
e->inline_failed = CIF_MAX_INLINE_INSNS_AUTO_LIMIT;
want_inline = false;
}
else
{
int growth = estimate_edge_growth (e);
inline_hints hints = estimate_edge_hints (e);
bool big_speedup = big_speedup_p (e);
if (growth <= 0)
;
/* Apply MAX_INLINE_INSNS_SINGLE limit. Do not do so when
hints suggests that inlining given function is very profitable. */
else if (DECL_DECLARED_INLINE_P (callee->decl)
&& growth >= MAX_INLINE_INSNS_SINGLE
&& ((!big_speedup
&& !(hints & (INLINE_HINT_indirect_call
| INLINE_HINT_loop_iterations
| INLINE_HINT_array_index
| INLINE_HINT_loop_stride)))
|| growth >= MAX_INLINE_INSNS_SINGLE * 16))
{
e->inline_failed = CIF_MAX_INLINE_INSNS_SINGLE_LIMIT;
want_inline = false;
}
else if (!DECL_DECLARED_INLINE_P (callee->decl)
&& !flag_inline_functions)
{
/* For functions not declared inline, if it has big_speedup
or has good hints for performance and the size growth is
small, they are profitable to inline. */
if (big_speedup
|| (hints & (INLINE_HINT_indirect_call
| INLINE_HINT_loop_iterations
| INLINE_HINT_array_index
| INLINE_HINT_loop_stride)))
{
if (growth >= MAX_GROWTH_AUTO_INLINE_FUNC)
want_inline = false;
}
/* growth_likely_positive is expensive, always test it last. */
else if (growth >= MAX_INLINE_INSNS_SINGLE
|| growth_likely_positive (callee, growth))
{
e->inline_failed = CIF_NOT_DECLARED_INLINED;
want_inline = false;
}
}
/* Apply MAX_INLINE_INSNS_AUTO limit for functions not declared inline
Upgrade it to MAX_INLINE_INSNS_SINGLE when hints suggests that
inlining given function is very profitable. */
else if (!DECL_DECLARED_INLINE_P (callee->decl)
&& !big_speedup
&& growth >= ((hints & (INLINE_HINT_indirect_call
| INLINE_HINT_loop_iterations
| INLINE_HINT_array_index
| INLINE_HINT_loop_stride))
? MAX (MAX_INLINE_INSNS_AUTO,
MAX_INLINE_INSNS_SINGLE)
: MAX_INLINE_INSNS_AUTO))
{
/* growth_likely_positive is expensive, always test it last. */
if (growth >= MAX_INLINE_INSNS_SINGLE
|| growth_likely_positive (callee, growth))
{
e->inline_failed = CIF_MAX_INLINE_INSNS_AUTO_LIMIT;
want_inline = false;
}
}
/* If call is cold, do not inline when function body would grow. */
else if (!edge_hot_enough_p (e)
&& (growth >= MAX_INLINE_INSNS_SINGLE
|| growth_likely_positive (callee, growth)))
{
e->inline_failed = CIF_UNLIKELY_CALL;
want_inline = false;
}
}
if (!want_inline && report)
report_inline_failed_reason (e);
return want_inline;
}
/* EDGE is self recursive edge.
We hand two cases - when function A is inlining into itself
or when function A is being inlined into another inliner copy of function
A within function B.
In first case OUTER_NODE points to the toplevel copy of A, while
in the second case OUTER_NODE points to the outermost copy of A in B.
In both cases we want to be extra selective since
inlining the call will just introduce new recursive calls to appear. */
static bool
want_inline_self_recursive_call_p (struct cgraph_edge *edge,
struct cgraph_node *outer_node,
bool peeling,
int depth)
{
char const *reason = NULL;
bool want_inline = true;
int caller_freq = CGRAPH_FREQ_BASE;
int max_depth = PARAM_VALUE (PARAM_MAX_INLINE_RECURSIVE_DEPTH_AUTO);
if (DECL_DECLARED_INLINE_P (edge->caller->decl))
max_depth = PARAM_VALUE (PARAM_MAX_INLINE_RECURSIVE_DEPTH);
if (!cgraph_maybe_hot_edge_p (edge))
{
reason = "recursive call is cold";
want_inline = false;
}
else if (max_count && !outer_node->count)
{
reason = "not executed in profile";
want_inline = false;
}
else if (depth > max_depth)
{
reason = "--param max-inline-recursive-depth exceeded.";
want_inline = false;
}
if (outer_node->global.inlined_to)
caller_freq = outer_node->callers->frequency;
if (!caller_freq)
{
reason = "function is inlined and unlikely";
want_inline = false;
}
if (!want_inline)
;
/* Inlining of self recursive function into copy of itself within other function
is transformation similar to loop peeling.
Peeling is profitable if we can inline enough copies to make probability
of actual call to the self recursive function very small. Be sure that
the probability of recursion is small.
We ensure that the frequency of recursing is at most 1 - (1/max_depth).
This way the expected number of recision is at most max_depth. */
else if (peeling)
{
int max_prob = CGRAPH_FREQ_BASE - ((CGRAPH_FREQ_BASE + max_depth - 1)
/ max_depth);
int i;
for (i = 1; i < depth; i++)
max_prob = max_prob * max_prob / CGRAPH_FREQ_BASE;
if (max_count
&& (edge->count * CGRAPH_FREQ_BASE / outer_node->count
>= max_prob))
{
reason = "profile of recursive call is too large";
want_inline = false;
}
if (!max_count
&& (edge->frequency * CGRAPH_FREQ_BASE / caller_freq
>= max_prob))
{
reason = "frequency of recursive call is too large";
want_inline = false;
}
}
/* Recursive inlining, i.e. equivalent of unrolling, is profitable if recursion
depth is large. We reduce function call overhead and increase chances that
things fit in hardware return predictor.
Recursive inlining might however increase cost of stack frame setup
actually slowing down functions whose recursion tree is wide rather than
deep.
Deciding reliably on when to do recursive inlining without profile feedback
is tricky. For now we disable recursive inlining when probability of self
recursion is low.
Recursive inlining of self recursive call within loop also results in large loop
depths that generally optimize badly. We may want to throttle down inlining
in those cases. In particular this seems to happen in one of libstdc++ rb tree
methods. */
else
{
if (max_count
&& (edge->count * 100 / outer_node->count
<= PARAM_VALUE (PARAM_MIN_INLINE_RECURSIVE_PROBABILITY)))
{
reason = "profile of recursive call is too small";
want_inline = false;
}
else if (!max_count
&& (edge->frequency * 100 / caller_freq
<= PARAM_VALUE (PARAM_MIN_INLINE_RECURSIVE_PROBABILITY)))
{
reason = "frequency of recursive call is too small";
want_inline = false;
}
}
if (!want_inline && dump_file)
fprintf (dump_file, " not inlining recursively: %s\n", reason);
return want_inline;
}
/* Return true when NODE has uninlinable caller;
set HAS_HOT_CALL if it has hot call.
Worker for cgraph_for_node_and_aliases. */
static bool
check_callers (struct cgraph_node *node, void *has_hot_call)
{
struct cgraph_edge *e;
for (e = node->callers; e; e = e->next_caller)
{
if (!can_inline_edge_p (e, true))
return true;
if (!(*(bool *)has_hot_call) && cgraph_maybe_hot_edge_p (e))
*(bool *)has_hot_call = true;
}
return false;
}
/* If NODE has a caller, return true. */
static bool
has_caller_p (struct cgraph_node *node, void *data ATTRIBUTE_UNUSED)
{
if (node->callers)
return true;
return false;
}
/* Decide if inlining NODE would reduce unit size by eliminating
the offline copy of function.
When COLD is true the cold calls are considered, too. */
static bool
want_inline_function_to_all_callers_p (struct cgraph_node *node, bool cold)
{
struct cgraph_node *function = cgraph_function_or_thunk_node (node, NULL);
bool has_hot_call = false;
/* Does it have callers? */
if (!cgraph_for_node_and_aliases (node, has_caller_p, NULL, true))
return false;
/* Already inlined? */
if (function->global.inlined_to)
return false;
if (cgraph_function_or_thunk_node (node, NULL) != node)
return false;
/* Inlining into all callers would increase size? */
if (estimate_growth (node) > 0)
return false;
/* All inlines must be possible. */
if (cgraph_for_node_and_aliases (node, check_callers, &has_hot_call, true))
return false;
if (!cold && !has_hot_call)
return false;
return true;
}
#define RELATIVE_TIME_BENEFIT_RANGE (INT_MAX / 64)
/* Return true if FUNCDECL is a function with fixed
argument list. */
static bool
fixed_arg_function_p (tree fndecl)
{
tree fntype = TREE_TYPE (fndecl);
return (TYPE_ARG_TYPES (fntype) == 0
|| (TREE_VALUE (tree_last (TYPE_ARG_TYPES (fntype)))
== void_type_node));
}
/* For profile collection with flag_dyn_ipa (LIPO), we always
want to inline comdat functions for the following reasons:
1) Functions in comdat may be actually defined in a different
module (depending on how linker picks). This results in a edge
from one module to another module in the dynamic callgraph.
The edge is false and result in unnecessary module grouping.
2) The profile counters in comdat functions are not 'comdated'
-- which means each copy of the same comdat function has its
own set of counters. With inlining, we are actually splitting
the counters and make the profile information 'context sensitive',
which is a good thing.
3) During profile-use pass of LIPO (flag_dyn_ipa == 1),
the pre-tree_profile inline decisions have to be the same as the
profile-gen pass (otherwise coverage mismatch will occur). Due to
this reason, it is better for each module to 'use' the comdat copy
of its own. The only way to get profile data for the copy is to
inline the copy in profile-gen phase.
TODO: For indirectly called comdat functions, the above issues
still exist. */
static bool
better_inline_comdat_function_p (struct cgraph_node *node)
{
return (profile_arc_flag && flag_dyn_ipa
&& DECL_COMDAT (node->decl)
&& inline_summary (node)->size
<= PARAM_VALUE (PARAM_MAX_INLINE_INSNS_SINGLE)
&& fixed_arg_function_p (node->decl));
}
/* Return relative time improvement for inlining EDGE in range
1...RELATIVE_TIME_BENEFIT_RANGE */
static inline int
relative_time_benefit (struct inline_summary *callee_info,
struct cgraph_edge *edge,
int edge_time)
{
gcov_type relbenefit;
gcov_type uninlined_call_time = compute_uninlined_call_time (callee_info, edge);
gcov_type inlined_call_time = compute_inlined_call_time (edge, edge_time);
/* Inlining into extern inline function is not a win. */
if (DECL_EXTERNAL (edge->caller->global.inlined_to
? edge->caller->global.inlined_to->decl
: edge->caller->decl))
return 1;
/* Watch overflows. */
gcc_checking_assert (uninlined_call_time >= 0);
gcc_checking_assert (inlined_call_time >= 0);
gcc_checking_assert (uninlined_call_time >= inlined_call_time);
/* Compute relative time benefit, i.e. how much the call becomes faster.
??? perhaps computing how much the caller+calle together become faster
would lead to more realistic results. */
if (!uninlined_call_time)
uninlined_call_time = 1;
relbenefit =
RDIV (((gcov_type)uninlined_call_time - inlined_call_time) * RELATIVE_TIME_BENEFIT_RANGE,
uninlined_call_time);
relbenefit = MIN (relbenefit, RELATIVE_TIME_BENEFIT_RANGE);
gcc_checking_assert (relbenefit >= 0);
relbenefit = MAX (relbenefit, 1);
return relbenefit;
}
/* A cost model driving the inlining heuristics in a way so the edges with
smallest badness are inlined first. After each inlining is performed
the costs of all caller edges of nodes affected are recomputed so the
metrics may accurately depend on values such as number of inlinable callers
of the function or function body size. */
static int
edge_badness (struct cgraph_edge *edge, bool dump)
{
gcov_type badness;
int growth, edge_time;
struct cgraph_node *callee = cgraph_function_or_thunk_node (edge->callee,
NULL);
struct inline_summary *callee_info = inline_summary (callee);
inline_hints hints;
if (DECL_DISREGARD_INLINE_LIMITS (callee->decl))
return INT_MIN;
growth = estimate_edge_growth (edge);
edge_time = estimate_edge_time (edge);
hints = estimate_edge_hints (edge);
gcc_checking_assert (edge_time >= 0);
gcc_checking_assert (edge_time <= callee_info->time);
gcc_checking_assert (growth <= callee_info->size);
if (dump)
{
fprintf (dump_file, " Badness calculation for %s/%i -> %s/%i\n",
xstrdup (edge->caller->name ()),
edge->caller->order,
xstrdup (callee->name ()),
edge->callee->order);
fprintf (dump_file, " size growth %i, time %i ",
growth,
edge_time);
dump_inline_hints (dump_file, hints);
if (big_speedup_p (edge))
fprintf (dump_file, " big_speedup");
fprintf (dump_file, "\n");
}
/* Always prefer inlining saving code size. */
if (growth <= 0)
{
badness = INT_MIN / 2 + growth;
if (dump)
fprintf (dump_file, " %i: Growth %i <= 0\n", (int) badness,
growth);
}
/* When profiling is available, compute badness as:
relative_edge_count * relative_time_benefit
goodness = -------------------------------------------
growth_f_caller
badness = -goodness
The fraction is upside down, because on edge counts and time beneits
the bounds are known. Edge growth is essentially unlimited. */
else if (max_count)
{
sreal tmp, relbenefit_real, growth_real;
int relbenefit = relative_time_benefit (callee_info, edge, edge_time);
/* Capping edge->count to max_count. edge->count can be larger than
max_count if an inline adds new edges which increase max_count
after max_count is computed. */
gcov_type edge_count = edge->count > max_count ? max_count : edge->count;
sreal_init (&relbenefit_real, relbenefit, 0);
sreal_init (&growth_real, growth, 0);
/* relative_edge_count. */
sreal_init (&tmp, edge_count, 0);
sreal_div (&tmp, &tmp, &max_count_real);
/* relative_time_benefit. */
sreal_mul (&tmp, &tmp, &relbenefit_real);
sreal_div (&tmp, &tmp, &max_relbenefit_real);
/* growth_f_caller. */
sreal_mul (&tmp, &tmp, &half_int_min_real);
sreal_div (&tmp, &tmp, &growth_real);
badness = -1 * sreal_to_int (&tmp);
if (dump)
{
fprintf (dump_file,
" %i (relative %f): profile info. Relative count %f%s"
" * Relative benefit %f\n",
(int) badness, (double) badness / INT_MIN,
(double) edge_count / max_count,
edge->count > max_count ? " (capped to max_count)" : "",
relbenefit * 100.0 / RELATIVE_TIME_BENEFIT_RANGE);
}
}
/* When function local profile is available. Compute badness as:
relative_time_benefit
goodness = ---------------------------------
growth_of_caller * overall_growth
badness = - goodness
compensated by the inline hints.
*/
else if (flag_guess_branch_prob)
{
badness = (relative_time_benefit (callee_info, edge, edge_time)
* (INT_MIN / 16 / RELATIVE_TIME_BENEFIT_RANGE));
badness /= (MIN (65536/2, growth) * MIN (65536/2, MAX (1, callee_info->growth)));
gcc_checking_assert (badness <=0 && badness >= INT_MIN / 16);
if ((hints & (INLINE_HINT_indirect_call
| INLINE_HINT_loop_iterations
| INLINE_HINT_array_index
| INLINE_HINT_loop_stride))
|| callee_info->growth <= 0)
badness *= 8;
if (hints & (INLINE_HINT_same_scc))
badness /= 16;
else if (hints & (INLINE_HINT_in_scc))
badness /= 8;
else if (hints & (INLINE_HINT_cross_module))
badness /= 2;
gcc_checking_assert (badness <= 0 && badness >= INT_MIN / 2);
if ((hints & INLINE_HINT_declared_inline) && badness >= INT_MIN / 32)
badness *= 16;
if (dump)
{
fprintf (dump_file,
" %i: guessed profile. frequency %f,"
" benefit %f%%, time w/o inlining %i, time w inlining %i"
" overall growth %i (current) %i (original)\n",
(int) badness, (double)edge->frequency / CGRAPH_FREQ_BASE,
relative_time_benefit (callee_info, edge, edge_time) * 100.0
/ RELATIVE_TIME_BENEFIT_RANGE,
(int)compute_uninlined_call_time (callee_info, edge),
(int)compute_inlined_call_time (edge, edge_time),
estimate_growth (callee),
callee_info->growth);
}
}
/* When function local profile is not available or it does not give
useful information (ie frequency is zero), base the cost on
loop nest and overall size growth, so we optimize for overall number
of functions fully inlined in program. */
else
{
int nest = MIN (inline_edge_summary (edge)->loop_depth, 8);
badness = growth * 256;
/* Decrease badness if call is nested. */
if (badness > 0)
badness >>= nest;
else
{
badness <<= nest;
}
if (dump)
fprintf (dump_file, " %i: no profile. nest %i\n", (int) badness,
nest);
}
/* Ensure that we did not overflow in all the fixed point math above. */
gcc_assert (badness >= INT_MIN);
gcc_assert (badness <= INT_MAX - 1);
/* Make recursive inlining happen always after other inlining is done. */
if (cgraph_edge_recursive_p (edge))
return badness + 1;
else
{
if (better_inline_comdat_function_p (edge->callee))
return INT_MIN + 1;
else
return badness;
}
}
/* Recompute badness of EDGE and update its key in HEAP if needed. */
static inline void
update_edge_key (fibheap_t heap, struct cgraph_edge *edge)
{
int badness = edge_badness (edge, false);
if (edge->aux)
{
fibnode_t n = (fibnode_t) edge->aux;
gcc_checking_assert (n->data == edge);
/* fibheap_replace_key only decrease the keys.
When we increase the key we do not update heap
and instead re-insert the element once it becomes
a minimum of heap. */
if (badness < n->key)
{
if (dump_file && (dump_flags & TDF_DETAILS))
{
fprintf (dump_file,
" decreasing badness %s/%i -> %s/%i, %i to %i\n",
xstrdup (edge->caller->name ()),
edge->caller->order,
xstrdup (edge->callee->name ()),
edge->callee->order,
(int)n->key,
badness);
}
fibheap_replace_key (heap, n, badness);
gcc_checking_assert (n->key == badness);
}
}
else
{
if (dump_file && (dump_flags & TDF_DETAILS))
{
fprintf (dump_file,
" enqueuing call %s/%i -> %s/%i, badness %i\n",
xstrdup (edge->caller->name ()),
edge->caller->order,
xstrdup (edge->callee->name ()),
edge->callee->order,
badness);
}
edge->aux = fibheap_insert (heap, badness, edge);
}
}
/* NODE was inlined.
All caller edges needs to be resetted because
size estimates change. Similarly callees needs reset
because better context may be known. */
static void
reset_edge_caches (struct cgraph_node *node)
{
struct cgraph_edge *edge;
struct cgraph_edge *e = node->callees;
struct cgraph_node *where = node;
int i;
struct ipa_ref *ref;
if (where->global.inlined_to)
where = where->global.inlined_to;
/* WHERE body size has changed, the cached growth is invalid. */
reset_node_growth_cache (where);
for (edge = where->callers; edge; edge = edge->next_caller)
if (edge->inline_failed)
reset_edge_growth_cache (edge);
for (i = 0; ipa_ref_list_referring_iterate (&where->ref_list,
i, ref); i++)
if (ref->use == IPA_REF_ALIAS)
reset_edge_caches (ipa_ref_referring_node (ref));
if (!e)
return;
while (true)
if (!e->inline_failed && e->callee->callees)
e = e->callee->callees;
else
{
if (e->inline_failed)
reset_edge_growth_cache (e);
if (e->next_callee)
e = e->next_callee;
else
{
do
{
if (e->caller == node)
return;
e = e->caller->callers;
}
while (!e->next_callee);
e = e->next_callee;
}
}
}
/* Recompute HEAP nodes for each of caller of NODE.
UPDATED_NODES track nodes we already visited, to avoid redundant work.
When CHECK_INLINABLITY_FOR is set, re-check for specified edge that
it is inlinable. Otherwise check all edges. */
static void
update_caller_keys (fibheap_t heap, struct cgraph_node *node,
bitmap updated_nodes,
struct cgraph_edge *check_inlinablity_for)
{
struct cgraph_edge *edge;
int i;
struct ipa_ref *ref;
if ((!node->alias && !inline_summary (node)->inlinable)
|| node->global.inlined_to)
return;
if (!bitmap_set_bit (updated_nodes, node->uid))
return;
for (i = 0; ipa_ref_list_referring_iterate (&node->ref_list,
i, ref); i++)
if (ref->use == IPA_REF_ALIAS)
{
struct cgraph_node *alias = ipa_ref_referring_node (ref);
update_caller_keys (heap, alias, updated_nodes, check_inlinablity_for);
}
for (edge = node->callers; edge; edge = edge->next_caller)
if (edge->inline_failed)
{
if (!check_inlinablity_for
|| check_inlinablity_for == edge)
{
if (can_inline_edge_p (edge, false)
&& (want_inline_small_function_p (edge, false)
|| better_inline_comdat_function_p (node)))
update_edge_key (heap, edge);
else if (edge->aux)
{
report_inline_failed_reason (edge);
fibheap_delete_node (heap, (fibnode_t) edge->aux);
edge->aux = NULL;
}
}
else if (edge->aux)
update_edge_key (heap, edge);
}
}
/* Recompute HEAP nodes for each uninlined call in NODE.
This is used when we know that edge badnesses are going only to increase
(we introduced new call site) and thus all we need is to insert newly
created edges into heap. */
static void
update_callee_keys (fibheap_t heap, struct cgraph_node *node,
bitmap updated_nodes)
{
struct cgraph_edge *e = node->callees;
if (!e)
return;
while (true)
if (!e->inline_failed && e->callee->callees)
e = e->callee->callees;
else
{
enum availability avail;
struct cgraph_node *callee;
/* We do not reset callee growth cache here. Since we added a new call,
growth chould have just increased and consequentely badness metric
don't need updating. */
if (e->inline_failed
&& (callee = cgraph_function_or_thunk_node (e->callee, &avail))
&& inline_summary (callee)->inlinable
&& avail >= AVAIL_AVAILABLE
&& !bitmap_bit_p (updated_nodes, callee->uid))
{
if (can_inline_edge_p (e, false)
&& want_inline_small_function_p (e, false))
update_edge_key (heap, e);
else if (e->aux)
{
report_inline_failed_reason (e);
fibheap_delete_node (heap, (fibnode_t) e->aux);
e->aux = NULL;
}
}
if (e->next_callee)
e = e->next_callee;
else
{
do
{
if (e->caller == node)
return;
e = e->caller->callers;
}
while (!e->next_callee);
e = e->next_callee;
}
}
}
/* Enqueue all recursive calls from NODE into priority queue depending on
how likely we want to recursively inline the call. */
static void
lookup_recursive_calls (struct cgraph_node *node, struct cgraph_node *where,
fibheap_t heap)
{
struct cgraph_edge *e;
enum availability avail;
for (e = where->callees; e; e = e->next_callee)
if (e->callee == node
|| (cgraph_function_or_thunk_node (e->callee, &avail) == node
&& avail > AVAIL_OVERWRITABLE))
{
/* When profile feedback is available, prioritize by expected number
of calls. */
fibheap_insert (heap,
!max_count ? -e->frequency
: -(e->count / ((max_count + (1<<24) - 1) / (1<<24))),
e);
}
for (e = where->callees; e; e = e->next_callee)
if (!e->inline_failed)
lookup_recursive_calls (node, e->callee, heap);
}
/* Decide on recursive inlining: in the case function has recursive calls,
inline until body size reaches given argument. If any new indirect edges
are discovered in the process, add them to *NEW_EDGES, unless NEW_EDGES
is NULL. */
static bool
recursive_inlining (struct cgraph_edge *edge,
vec *new_edges)
{
int limit = PARAM_VALUE (PARAM_MAX_INLINE_INSNS_RECURSIVE_AUTO);
int probability = PARAM_VALUE (PARAM_MIN_INLINE_RECURSIVE_PROBABILITY);
fibheap_t heap;
struct cgraph_node *node;
struct cgraph_edge *e;
struct cgraph_node *master_clone = NULL, *next;
int depth = 0;
int n = 0;
node = edge->caller;
if (node->global.inlined_to)
node = node->global.inlined_to;
if (DECL_DECLARED_INLINE_P (node->decl))
limit = PARAM_VALUE (PARAM_MAX_INLINE_INSNS_RECURSIVE);
/* Make sure that function is small enough to be considered for inlining. */
if (estimate_size_after_inlining (node, edge) >= limit)
return false;
heap = fibheap_new ();
lookup_recursive_calls (node, node, heap);
if (fibheap_empty (heap))
{
fibheap_delete (heap);
return false;
}
if (dump_file)
fprintf (dump_file,
" Performing recursive inlining on %s\n",
node->name ());
/* Do the inlining and update list of recursive call during process. */
while (!fibheap_empty (heap))
{
struct cgraph_edge *curr
= (struct cgraph_edge *) fibheap_extract_min (heap);
struct cgraph_node *cnode, *dest = curr->callee;
if (!can_inline_edge_p (curr, true))
continue;
/* MASTER_CLONE is produced in the case we already started modified
the function. Be sure to redirect edge to the original body before
estimating growths otherwise we will be seeing growths after inlining
the already modified body. */
if (master_clone)
{
cgraph_redirect_edge_callee (curr, master_clone);
reset_edge_growth_cache (curr);
}
if (estimate_size_after_inlining (node, curr) > limit)
{
cgraph_redirect_edge_callee (curr, dest);
reset_edge_growth_cache (curr);
break;
}
depth = 1;
for (cnode = curr->caller;
cnode->global.inlined_to; cnode = cnode->callers->caller)
if (node->decl
== cgraph_function_or_thunk_node (curr->callee, NULL)->decl)
depth++;
if (max_count)
{
if (!cgraph_maybe_hot_edge_p (curr))
{
if (dump_file)
fprintf (dump_file, " Not inlining cold call\n");
cgraph_redirect_edge_callee (curr, dest);
reset_edge_growth_cache (curr);
continue;
}
if (node->count == 0 || curr->count * 100 / node->count < probability)
{
if (dump_file)
fprintf (dump_file,
" Probability of edge is too small\n");
cgraph_redirect_edge_callee (curr, dest);
reset_edge_growth_cache (curr);
continue;
}
}
if (!want_inline_self_recursive_call_p (curr, node, false, depth))
{
cgraph_redirect_edge_callee (curr, dest);
reset_edge_growth_cache (curr);
continue;
}
if (!dbg_cnt (inl))
continue;
if (dump_file)
{
fprintf (dump_file,
" Inlining call of depth %i", depth);
if (node->count)
{
fprintf (dump_file, " called approx. %.2f times per call",
(double)curr->count / node->count);
}
fprintf (dump_file, "\n");
}
if (!master_clone)
{
/* We need original clone to copy around. */
master_clone = cgraph_clone_node (node, node->decl,
node->count, CGRAPH_FREQ_BASE,
false, vNULL, true, NULL, NULL);
for (e = master_clone->callees; e; e = e->next_callee)
if (!e->inline_failed)
clone_inlined_nodes (e, true, false, NULL, CGRAPH_FREQ_BASE);
cgraph_redirect_edge_callee (curr, master_clone);
reset_edge_growth_cache (curr);
}
inline_call (curr, false, new_edges, &overall_size, true);
lookup_recursive_calls (node, curr->callee, heap);
n++;
}
if (!fibheap_empty (heap) && dump_file)
fprintf (dump_file, " Recursive inlining growth limit met.\n");
fibheap_delete (heap);
if (!master_clone)
return false;
if (dump_file)
fprintf (dump_file,
"\n Inlined %i times, "
"body grown from size %i to %i, time %i to %i\n", n,
inline_summary (master_clone)->size, inline_summary (node)->size,
inline_summary (master_clone)->time, inline_summary (node)->time);
/* Remove master clone we used for inlining. We rely that clones inlined
into master clone gets queued just before master clone so we don't
need recursion. */
for (node = cgraph_first_function (); node != master_clone;
node = next)
{
next = cgraph_next_function (node);
if (node->global.inlined_to == master_clone)
cgraph_remove_node (node);
}
cgraph_remove_node (master_clone);
return true;
}
/* Given whole compilation unit estimate of INSNS, compute how large we can
allow the unit to grow. */
static int
compute_max_insns (int insns)
{
int max_insns = insns;
if (max_insns < PARAM_VALUE (PARAM_LARGE_UNIT_INSNS))
max_insns = PARAM_VALUE (PARAM_LARGE_UNIT_INSNS);
return ((HOST_WIDEST_INT) max_insns
* (100 + PARAM_VALUE (PARAM_INLINE_UNIT_GROWTH)) / 100);
}
/* Compute badness of all edges in NEW_EDGES and add them to the HEAP. */
static void
add_new_edges_to_heap (fibheap_t heap, vec new_edges)
{
while (new_edges.length () > 0)
{
struct cgraph_edge *edge = new_edges.pop ();
gcc_assert (!edge->aux);
if (edge->inline_failed
&& can_inline_edge_p (edge, true)
&& want_inline_small_function_p (edge, true))
edge->aux = fibheap_insert (heap, edge_badness (edge, false), edge);
}
}
/* Remove EDGE from the fibheap. */
static void
heap_edge_removal_hook (struct cgraph_edge *e, void *data)
{
if (e->callee)
reset_node_growth_cache (e->callee);
if (e->aux)
{
fibheap_delete_node ((fibheap_t)data, (fibnode_t)e->aux);
e->aux = NULL;
}
}
/* Return true if speculation of edge E seems useful.
If ANTICIPATE_INLINING is true, be conservative and hope that E
may get inlined. */
bool
speculation_useful_p (struct cgraph_edge *e, bool anticipate_inlining)
{
enum availability avail;
struct cgraph_node *target = cgraph_function_or_thunk_node (e->callee, &avail);
struct cgraph_edge *direct, *indirect;
struct ipa_ref *ref;
gcc_assert (e->speculative && !e->indirect_unknown_callee);
if (!cgraph_maybe_hot_edge_p (e))
return false;
/* See if IP optimizations found something potentially useful about the
function. For now we look only for CONST/PURE flags. Almost everything
else we propagate is useless. */
if (avail >= AVAIL_AVAILABLE)
{
int ecf_flags = flags_from_decl_or_type (target->decl);
if (ecf_flags & ECF_CONST)
{
cgraph_speculative_call_info (e, direct, indirect, ref);
if (!(indirect->indirect_info->ecf_flags & ECF_CONST))
return true;
}
else if (ecf_flags & ECF_PURE)
{
cgraph_speculative_call_info (e, direct, indirect, ref);
if (!(indirect->indirect_info->ecf_flags & ECF_PURE))
return true;
}
}
/* If we did not managed to inline the function nor redirect
to an ipa-cp clone (that are seen by having local flag set),
it is probably pointless to inline it unless hardware is missing
indirect call predictor. */
if (!anticipate_inlining && e->inline_failed && !target->local.local)
return false;
/* For overwritable targets there is not much to do. */
if (e->inline_failed && !can_inline_edge_p (e, false, true))
return false;
/* OK, speculation seems interesting. */
return true;
}
/* We know that EDGE is not going to be inlined.
See if we can remove speculation. */
static void
resolve_noninline_speculation (fibheap_t edge_heap, struct cgraph_edge *edge)
{
if (edge->speculative && !speculation_useful_p (edge, false))
{
struct cgraph_node *node = edge->caller;
struct cgraph_node *where = node->global.inlined_to
? node->global.inlined_to : node;
bitmap updated_nodes = BITMAP_ALLOC (NULL);
cgraph_resolve_speculation (edge, NULL);
reset_edge_caches (where);
inline_update_overall_summary (where);
update_caller_keys (edge_heap, where,
updated_nodes, NULL);
update_callee_keys (edge_heap, where,
updated_nodes);
BITMAP_FREE (updated_nodes);
}
}
/* We use greedy algorithm for inlining of small functions:
All inline candidates are put into prioritized heap ordered in
increasing badness.
The inlining of small functions is bounded by unit growth parameters. */
static void
inline_small_functions (void)
{
struct cgraph_node *node;
struct cgraph_edge *edge;
fibheap_t edge_heap = fibheap_new ();
bitmap updated_nodes = BITMAP_ALLOC (NULL);
int min_size, max_size;
auto_vec new_indirect_edges;
int initial_size = 0;
struct cgraph_node **order = XCNEWVEC (struct cgraph_node *, cgraph_n_nodes);
struct cgraph_edge_hook_list *edge_removal_hook_holder;
is_in_ipa_inline = true;
if (flag_indirect_inlining)
new_indirect_edges.create (8);
edge_removal_hook_holder
= cgraph_add_edge_removal_hook (&heap_edge_removal_hook, edge_heap);
/* Compute overall unit size and other global parameters used by badness
metrics. */
max_count = 0;
ipa_reduced_postorder (order, true, true, NULL);
free (order);
FOR_EACH_DEFINED_FUNCTION (node)
if (!node->global.inlined_to)
{
if (cgraph_function_with_gimple_body_p (node)
|| node->thunk.thunk_p)
{
struct inline_summary *info = inline_summary (node);
struct ipa_dfs_info *dfs = (struct ipa_dfs_info *) node->aux;
if (!DECL_EXTERNAL (node->decl))
initial_size += info->size;
info->growth = estimate_growth (node);
if (dfs && dfs->next_cycle)
{
struct cgraph_node *n2;
int id = dfs->scc_no + 1;
for (n2 = node; n2;
n2 = ((struct ipa_dfs_info *) node->aux)->next_cycle)
{
struct inline_summary *info2 = inline_summary (n2);
if (info2->scc_no)
break;
info2->scc_no = id;
}
}
}
for (edge = node->callers; edge; edge = edge->next_caller)
if (max_count < edge->count)
max_count = edge->count;
for (edge = node->indirect_calls; edge; edge = edge->next_callee)
if (max_count < edge->count)
max_count = edge->count;
}
sreal_init (&max_count_real, max_count, 0);
sreal_init (&max_relbenefit_real, RELATIVE_TIME_BENEFIT_RANGE, 0);
sreal_init (&half_int_min_real, INT_MAX / 2, 0);
ipa_free_postorder_info ();
initialize_growth_caches ();
if (dump_file)
fprintf (dump_file,
"\nDeciding on inlining of small functions. Starting with size %i.\n",
initial_size);
overall_size = initial_size;
max_size = compute_max_insns (overall_size);
min_size = overall_size;
/* Populate the heap with all edges we might inline. */
FOR_EACH_DEFINED_FUNCTION (node)
{
bool update = false;
struct cgraph_edge *next;
if (dump_file)
fprintf (dump_file, "Enqueueing calls in %s/%i.\n",
node->name (), node->order);
for (edge = node->callees; edge; edge = next)
{
next = edge->next_callee;
if (edge->inline_failed
&& !edge->aux
&& can_inline_edge_p (edge, true)
&& (want_inline_small_function_p (edge, true)
|| better_inline_comdat_function_p (node))
&& edge->inline_failed)
{
gcc_assert (!edge->aux);
update_edge_key (edge_heap, edge);
}
if (edge->speculative && !speculation_useful_p (edge, edge->aux != NULL))
{
cgraph_resolve_speculation (edge, NULL);
update = true;
}
}
if (update)
{
struct cgraph_node *where = node->global.inlined_to
? node->global.inlined_to : node;
inline_update_overall_summary (where);
reset_node_growth_cache (where);
reset_edge_caches (where);
update_caller_keys (edge_heap, where,
updated_nodes, NULL);
bitmap_clear (updated_nodes);
}
}
gcc_assert (in_lto_p
|| !max_count
|| (profile_info && flag_branch_probabilities));
while (!fibheap_empty (edge_heap))
{
int old_size = overall_size;
struct cgraph_node *where, *callee;
int badness = fibheap_min_key (edge_heap);
int current_badness;
int cached_badness;
int growth;
edge = (struct cgraph_edge *) fibheap_extract_min (edge_heap);
gcc_assert (edge->aux);
edge->aux = NULL;
if (!edge->inline_failed || !edge->callee->analyzed)
continue;
if (L_IPO_COMP_MODE && !edge->call_stmt)
continue;
/* Be sure that caches are maintained consistent.
We can not make this ENABLE_CHECKING only because it cause different
updates of the fibheap queue. */
cached_badness = edge_badness (edge, false);
reset_edge_growth_cache (edge);
reset_node_growth_cache (edge->callee);
/* When updating the edge costs, we only decrease badness in the keys.
Increases of badness are handled lazilly; when we see key with out
of date value on it, we re-insert it now. */
current_badness = edge_badness (edge, false);
gcc_assert (cached_badness == current_badness);
gcc_assert (current_badness >= badness);
if (current_badness != badness)
{
edge->aux = fibheap_insert (edge_heap, current_badness, edge);
continue;
}
if (!can_inline_edge_p (edge, true))
{
resolve_noninline_speculation (edge_heap, edge);
continue;
}
callee = cgraph_function_or_thunk_node (edge->callee, NULL);
growth = estimate_edge_growth (edge);
if (dump_file)
{
fprintf (dump_file,
"\nConsidering %s/%i with %i size\n",
callee->name (), callee->order,
inline_summary (callee)->size);
fprintf (dump_file,
" to be inlined into %s/%i in %s:%i\n"
" Estimated badness is %i, frequency %.2f.\n",
edge->caller->name (), edge->caller->order,
flag_wpa ? "unknown"
: gimple_filename ((const_gimple) edge->call_stmt),
flag_wpa ? -1
: gimple_lineno ((const_gimple) edge->call_stmt),
badness,
edge->frequency / (double)CGRAPH_FREQ_BASE);
if (edge->count)
fprintf (dump_file," Called "HOST_WIDEST_INT_PRINT_DEC"x\n",
edge->count);
if (dump_flags & TDF_DETAILS)
edge_badness (edge, true);
}
if (overall_size + growth > max_size
&& !DECL_DISREGARD_INLINE_LIMITS (callee->decl))
{
edge->inline_failed = CIF_INLINE_UNIT_GROWTH_LIMIT;
report_inline_failed_reason (edge);
resolve_noninline_speculation (edge_heap, edge);
continue;
}
if (!want_inline_small_function_p (edge, true)
&& !better_inline_comdat_function_p (edge->callee))
{
resolve_noninline_speculation (edge_heap, edge);
continue;
}
if (!dbg_cnt (inl))
continue;
/* Heuristics for inlining small functions work poorly for
recursive calls where we do effects similar to loop unrolling.
When inlining such edge seems profitable, leave decision on
specific inliner. */
if (cgraph_edge_recursive_p (edge))
{
where = edge->caller;
if (where->global.inlined_to)
where = where->global.inlined_to;
if (!recursive_inlining (edge,
flag_indirect_inlining
? &new_indirect_edges : NULL))
{
edge->inline_failed = CIF_RECURSIVE_INLINING;
resolve_noninline_speculation (edge_heap, edge);
continue;
}
reset_edge_caches (where);
/* Recursive inliner inlines all recursive calls of the function
at once. Consequently we need to update all callee keys. */
if (flag_indirect_inlining)
add_new_edges_to_heap (edge_heap, new_indirect_edges);
update_callee_keys (edge_heap, where, updated_nodes);
bitmap_clear (updated_nodes);
}
else
{
struct cgraph_node *outer_node = NULL;
int depth = 0;
if (!dbg_cnt (inl))
continue;
/* Consider the case where self recursive function A is inlined
into B. This is desired optimization in some cases, since it
leads to effect similar of loop peeling and we might completely
optimize out the recursive call. However we must be extra
selective. */
where = edge->caller;
while (where->global.inlined_to)
{
if (where->decl == callee->decl)
outer_node = where, depth++;
where = where->callers->caller;
}
if (outer_node
&& !want_inline_self_recursive_call_p (edge, outer_node,
true, depth))
{
edge->inline_failed
= (DECL_DISREGARD_INLINE_LIMITS (edge->callee->decl)
? CIF_RECURSIVE_INLINING : CIF_UNSPECIFIED);
resolve_noninline_speculation (edge_heap, edge);
continue;
}
else if (depth && dump_file)
fprintf (dump_file, " Peeling recursion with depth %i\n", depth);
gcc_checking_assert (!callee->global.inlined_to);
inline_call (edge, true, &new_indirect_edges, &overall_size, true);
if (flag_indirect_inlining)
add_new_edges_to_heap (edge_heap, new_indirect_edges);
reset_edge_caches (edge->callee);
reset_node_growth_cache (callee);
update_callee_keys (edge_heap, where, updated_nodes);
}
where = edge->caller;
if (where->global.inlined_to)
where = where->global.inlined_to;
/* Our profitability metric can depend on local properties
such as number of inlinable calls and size of the function body.
After inlining these properties might change for the function we
inlined into (since it's body size changed) and for the functions
called by function we inlined (since number of it inlinable callers
might change). */
update_caller_keys (edge_heap, where, updated_nodes, NULL);
bitmap_clear (updated_nodes);
if (dump_file)
{
fprintf (dump_file,
"INFO: %s Inlined into %s which now has time %i and size %i,"
"net change of %+i.\n",
edge->callee->name (),
edge->caller->name (),
inline_summary (edge->caller)->time,
inline_summary (edge->caller)->size,
overall_size - old_size);
}
if (min_size > overall_size)
{
min_size = overall_size;
max_size = compute_max_insns (min_size);
if (dump_file)
fprintf (dump_file, "New minimal size reached: %i\n", min_size);
}
}
free_growth_caches ();
fibheap_delete (edge_heap);
if (dump_file)
fprintf (dump_file,
"Unit growth for small function inlining: %i->%i (%i%%)\n",
initial_size, overall_size,
initial_size ? overall_size * 100 / (initial_size) - 100: 0);
BITMAP_FREE (updated_nodes);
cgraph_remove_edge_removal_hook (edge_removal_hook_holder);
}
/* Flatten NODE. Performed both during early inlining and
at IPA inlining time. */
static void
flatten_function (struct cgraph_node *node, bool early)
{
struct cgraph_edge *e;
/* We shouldn't be called recursively when we are being processed. */
gcc_assert (node->aux == NULL);
node->aux = (void *) node;
for (e = node->callees; e; e = e->next_callee)
{
struct cgraph_node *orig_callee;
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee, NULL);
/* We've hit cycle? It is time to give up. */
if (callee->aux)
{
if (dump_file)
fprintf (dump_file,
"Not inlining %s into %s to avoid cycle.\n",
xstrdup (callee->name ()),
xstrdup (e->caller->name ()));
e->inline_failed = CIF_RECURSIVE_INLINING;
continue;
}
/* When the edge is already inlined, we just need to recurse into
it in order to fully flatten the leaves. */
if (!e->inline_failed)
{
flatten_function (callee, early);
continue;
}
/* Flatten attribute needs to be processed during late inlining. For
extra code quality we however do flattening during early optimization,
too. */
if (!early
? !can_inline_edge_p (e, true)
: !can_early_inline_edge_p (e))
continue;
if (cgraph_edge_recursive_p (e))
{
if (dump_file)
fprintf (dump_file, "Not inlining: recursive call.\n");
continue;
}
if (gimple_in_ssa_p (DECL_STRUCT_FUNCTION (node->decl))
!= gimple_in_ssa_p (DECL_STRUCT_FUNCTION (callee->decl)))
{
if (dump_file)
fprintf (dump_file, "Not inlining: SSA form does not match.\n");
continue;
}
/* Inline the edge and flatten the inline clone. Avoid
recursing through the original node if the node was cloned. */
if (dump_file)
fprintf (dump_file, " Inlining %s into %s.\n",
xstrdup (callee->name ()),
xstrdup (e->caller->name ()));
orig_callee = callee;
inline_call (e, true, NULL, NULL, false);
if (e->callee != orig_callee)
orig_callee->aux = (void *) node;
flatten_function (e->callee, early);
if (e->callee != orig_callee)
orig_callee->aux = NULL;
}
node->aux = NULL;
if (!node->global.inlined_to)
inline_update_overall_summary (node);
}
/* Count number of callers of NODE and store it into DATA (that
points to int. Worker for cgraph_for_node_and_aliases. */
static bool
sum_callers (struct cgraph_node *node, void *data)
{
struct cgraph_edge *e;
int *num_calls = (int *)data;
for (e = node->callers; e; e = e->next_caller)
(*num_calls)++;
return false;
}
/* Inline NODE to all callers. Worker for cgraph_for_node_and_aliases.
DATA points to number of calls originally found so we avoid infinite
recursion. */
static bool
inline_to_all_callers (struct cgraph_node *node, void *data)
{
int *num_calls = (int *)data;
bool callee_removed = false;
while (node->callers && !node->global.inlined_to)
{
struct cgraph_node *caller = node->callers->caller;
if (dump_file)
{
fprintf (dump_file,
"\nInlining %s size %i.\n",
node->name (),
inline_summary (node)->size);
fprintf (dump_file,
" Called once from %s %i insns.\n",
node->callers->caller->name (),
inline_summary (node->callers->caller)->size);
}
inline_call (node->callers, true, NULL, NULL, true, &callee_removed);
if (dump_file)
fprintf (dump_file,
" Inlined into %s which now has %i size\n",
caller->name (),
inline_summary (caller)->size);
if (!(*num_calls)--)
{
if (dump_file)
fprintf (dump_file, "New calls found; giving up.\n");
return callee_removed;
}
if (callee_removed)
return true;
}
return false;
}
/* Decide on the inlining. We do so in the topological order to avoid
expenses on updating data structures. */
static unsigned int
ipa_inline (void)
{
struct cgraph_node *node;
int nnodes;
struct cgraph_node **order;
int i;
int cold;
bool remove_functions = false;
if (!optimize)
return 0;
order = XCNEWVEC (struct cgraph_node *, cgraph_n_nodes);
if (in_lto_p && optimize)
ipa_update_after_lto_read ();
if (dump_file)
dump_inline_summaries (dump_file);
nnodes = ipa_reverse_postorder (order);
FOR_EACH_FUNCTION (node)
node->aux = 0;
if (dump_file)
fprintf (dump_file, "\nFlattening functions:\n");
/* In the first pass handle functions to be flattened. Do this with
a priority so none of our later choices will make this impossible. */
for (i = nnodes - 1; i >= 0; i--)
{
node = order[i];
/* Handle nodes to be flattened.
Ideally when processing callees we stop inlining at the
entry of cycles, possibly cloning that entry point and
try to flatten itself turning it into a self-recursive
function. */
if (lookup_attribute ("flatten",
DECL_ATTRIBUTES (node->decl)) != NULL)
{
if (dump_file)
fprintf (dump_file,
"Flattening %s\n", node->name ());
flatten_function (node, false);
}
}
inline_small_functions ();
/* Do first after-inlining removal. We want to remove all "stale" extern inline
functions and virtual functions so we really know what is called once. */
symtab_remove_unreachable_nodes (false, dump_file);
free (order);
/* Inline functions with a property that after inlining into all callers the
code size will shrink because the out-of-line copy is eliminated.
We do this regardless on the callee size as long as function growth limits
are met. */
if (dump_file)
fprintf (dump_file,
"\nDeciding on functions to be inlined into all callers and removing useless speculations:\n");
/* Inlining one function called once has good chance of preventing
inlining other function into the same callee. Ideally we should
work in priority order, but probably inlining hot functions first
is good cut without the extra pain of maintaining the queue.
??? this is not really fitting the bill perfectly: inlining function
into callee often leads to better optimization of callee due to
increased context for optimization.
For example if main() function calls a function that outputs help
and then function that does the main optmization, we should inline
the second with priority even if both calls are cold by themselves.
We probably want to implement new predicate replacing our use of
maybe_hot_edge interpreted as maybe_hot_edge || callee is known
to be hot. */
for (cold = 0; cold <= 1; cold ++)
{
FOR_EACH_DEFINED_FUNCTION (node)
{
struct cgraph_edge *edge, *next;
bool update=false;
for (edge = node->callees; edge; edge = next)
{
next = edge->next_callee;
if (edge->speculative && !speculation_useful_p (edge, false))
{
cgraph_resolve_speculation (edge, NULL);
update = true;
remove_functions = true;
}
}
if (update)
{
struct cgraph_node *where = node->global.inlined_to
? node->global.inlined_to : node;
reset_node_growth_cache (where);
reset_edge_caches (where);
inline_update_overall_summary (where);
}
if (flag_inline_functions_called_once
&& want_inline_function_to_all_callers_p (node, cold))
{
int num_calls = 0;
cgraph_for_node_and_aliases (node, sum_callers,
&num_calls, true);
while (cgraph_for_node_and_aliases (node, inline_to_all_callers,
&num_calls, true))
;
remove_functions = true;
}
}
}
/* Free ipa-prop structures if they are no longer needed. */
if (optimize)
ipa_free_all_structures_after_iinln ();
if (dump_file)
fprintf (dump_file,
"\nInlined %i calls, eliminated %i functions\n\n",
ncalls_inlined, nfunctions_inlined);
if (dump_file)
dump_inline_summaries (dump_file);
/* In WPA we use inline summaries for partitioning process. */
if (!flag_wpa)
inline_free_summary ();
return remove_functions ? TODO_remove_functions : 0;
}
/* Inline always-inline function calls in NODE. */
static bool
inline_always_inline_functions (struct cgraph_node *node)
{
struct cgraph_edge *e;
bool inlined = false;
for (e = node->callees; e; e = e->next_callee)
{
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee, NULL);
if (!DECL_DISREGARD_INLINE_LIMITS (callee->decl))
continue;
if (cgraph_edge_recursive_p (e))
{
if (dump_file)
fprintf (dump_file, " Not inlining recursive call to %s.\n",
e->callee->name ());
e->inline_failed = CIF_RECURSIVE_INLINING;
continue;
}
if (!can_early_inline_edge_p (e))
{
/* Set inlined to true if the callee is marked "always_inline" but
is not inlinable. This will allow flagging an error later in
expand_call_inline in tree-inline.c. */
if (lookup_attribute ("always_inline",
DECL_ATTRIBUTES (callee->decl)) != NULL)
inlined = true;
continue;
}
if (dump_file)
fprintf (dump_file, " Inlining %s into %s (always_inline).\n",
xstrdup (e->callee->name ()),
xstrdup (e->caller->name ()));
inline_call (e, true, NULL, NULL, false);
inlined = true;
}
if (inlined)
inline_update_overall_summary (node);
return inlined;
}
/* Decide on the inlining. We do so in the topological order to avoid
expenses on updating data structures. */
static bool
early_inline_small_functions (struct cgraph_node *node)
{
struct cgraph_edge *e;
bool inlined = false;
for (e = node->callees; e; e = e->next_callee)
{
struct cgraph_node *callee = cgraph_function_or_thunk_node (e->callee, NULL);
if (!inline_summary (callee)->inlinable
|| !e->inline_failed)
continue;
/* Do not consider functions not declared inline. */
if (!DECL_DECLARED_INLINE_P (callee->decl)
&& !flag_inline_small_functions
&& !flag_inline_functions)
continue;
if (dump_file)
fprintf (dump_file, "Considering inline candidate %s.\n",
callee->name ());
if (!can_early_inline_edge_p (e))
continue;
if (cgraph_edge_recursive_p (e))
{
if (dump_file)
fprintf (dump_file, " Not inlining: recursive call.\n");
continue;
}
if (!want_early_inline_function_p (e))
continue;
if (dump_file)
fprintf (dump_file, " Inlining %s into %s.\n",
xstrdup (callee->name ()),
xstrdup (e->caller->name ()));
inline_call (e, true, NULL, NULL, true);
inlined = true;
}
return inlined;
}
/* Do inlining of small functions. Doing so early helps profiling and other
passes to be somewhat more effective and avoids some code duplication in
later real inlining pass for testcases with very many function calls. */
unsigned int
early_inliner (void)
{
struct cgraph_node *node = cgraph_get_node (current_function_decl);
struct cgraph_edge *edge;
unsigned int todo = 0;
int iterations = 0;
bool inlined = false;
if (seen_error ())
return 0;
/* Do nothing if datastructures for ipa-inliner are already computed. This
happens when some pass decides to construct new function and
cgraph_add_new_function calls lowering passes and early optimization on
it. This may confuse ourself when early inliner decide to inline call to
function clone, because function clones don't have parameter list in
ipa-prop matching their signature. */
if (ipa_node_params_vector.exists ())
return 0;
#ifdef ENABLE_CHECKING
verify_cgraph_node (node);
#endif
ipa_remove_all_references (&node->ref_list);
/* Even when not optimizing or not inlining inline always-inline
functions. */
inlined = inline_always_inline_functions (node);
if (!optimize
|| flag_no_inline
|| !flag_early_inlining
/* Never inline regular functions into always-inline functions
during incremental inlining. This sucks as functions calling
always inline functions will get less optimized, but at the
same time inlining of functions calling always inline
function into an always inline function might introduce
cycles of edges to be always inlined in the callgraph.
We might want to be smarter and just avoid this type of inlining. */
|| DECL_DISREGARD_INLINE_LIMITS (node->decl))
;
else if (lookup_attribute ("flatten",
DECL_ATTRIBUTES (node->decl)) != NULL)
{
/* When the function is marked to be flattened, recursively inline
all calls in it. */
if (dump_file)
fprintf (dump_file,
"Flattening %s\n", node->name ());
flatten_function (node, true);
inlined = true;
}
else
{
/* We iterate incremental inlining to get trivial cases of indirect
inlining. */
while (iterations < PARAM_VALUE (PARAM_EARLY_INLINER_MAX_ITERATIONS)
&& early_inline_small_functions (node))
{
timevar_push (TV_INTEGRATION);
todo |= optimize_inline_calls (current_function_decl);
/* Technically we ought to recompute inline parameters so the new
iteration of early inliner works as expected. We however have
values approximately right and thus we only need to update edge
info that might be cleared out for newly discovered edges. */
for (edge = node->callees; edge; edge = edge->next_callee)
{
struct inline_edge_summary *es = inline_edge_summary (edge);
if (!edge->call_stmt)
continue;
es->call_stmt_size
= estimate_num_insns (edge->call_stmt, &eni_size_weights);
es->call_stmt_time
= estimate_num_insns (edge->call_stmt, &eni_time_weights);
if (edge->callee->decl
&& !gimple_check_call_matching_types (
edge->call_stmt, edge->callee->decl, false))
edge->call_stmt_cannot_inline_p = true;
}
if (iterations < PARAM_VALUE (PARAM_EARLY_INLINER_MAX_ITERATIONS) - 1)
inline_update_overall_summary (node);
timevar_pop (TV_INTEGRATION);
iterations++;
inlined = false;
}
if (dump_file)
fprintf (dump_file, "Iterations: %i\n", iterations);
}
if (inlined)
{
timevar_push (TV_INTEGRATION);
todo |= optimize_inline_calls (current_function_decl);
timevar_pop (TV_INTEGRATION);
}
cfun->always_inline_functions_inlined = true;
return todo;
}
namespace {
const pass_data pass_data_early_inline =
{
GIMPLE_PASS, /* type */
"einline", /* name */
OPTGROUP_INLINE, /* optinfo_flags */
false, /* has_gate */
true, /* has_execute */
TV_EARLY_INLINING, /* tv_id */
PROP_ssa, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
0, /* todo_flags_finish */
};
class pass_early_inline : public gimple_opt_pass
{
public:
pass_early_inline (gcc::context *ctxt)
: gimple_opt_pass (pass_data_early_inline, ctxt)
{}
/* opt_pass methods: */
unsigned int execute () { return early_inliner (); }
}; // class pass_early_inline
} // anon namespace
gimple_opt_pass *
make_pass_early_inline (gcc::context *ctxt)
{
return new pass_early_inline (ctxt);
}
namespace {
const pass_data pass_data_ipa_inline =
{
IPA_PASS, /* type */
"inline", /* name */
OPTGROUP_INLINE, /* optinfo_flags */
false, /* has_gate */
true, /* has_execute */
TV_IPA_INLINING, /* tv_id */
0, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
TODO_remove_functions, /* todo_flags_start */
( TODO_dump_symtab ), /* todo_flags_finish */
};
class pass_ipa_inline : public ipa_opt_pass_d
{
public:
pass_ipa_inline (gcc::context *ctxt)
: ipa_opt_pass_d (pass_data_ipa_inline, ctxt,
inline_generate_summary, /* generate_summary */
inline_write_summary, /* write_summary */
inline_read_summary, /* read_summary */
NULL, /* write_optimization_summary */
NULL, /* read_optimization_summary */
NULL, /* stmt_fixup */
0, /* function_transform_todo_flags_start */
inline_transform, /* function_transform */
NULL) /* variable_transform */
{}
/* opt_pass methods: */
unsigned int execute () { return ipa_inline (); }
}; // class pass_ipa_inline
} // anon namespace
ipa_opt_pass_d *
make_pass_ipa_inline (gcc::context *ctxt)
{
return new pass_ipa_inline (ctxt);
}