;; Machine description of the Renesas M32R cpu for GNU C compiler
;; Copyright (C) 1996-2013 Free Software Foundation, Inc.
;; This file is part of GCC.
;; GCC is free software; you can redistribute it and/or modify it
;; under the terms of the GNU General Public License as published
;; by the Free Software Foundation; either version 3, or (at your
;; option) any later version.
;; GCC is distributed in the hope that it will be useful, but WITHOUT
;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
;; License for more details.
;; You should have received a copy of the GNU General Public License
;; along with GCC; see the file COPYING3. If not see
;; .
;; See file "rtl.def" for documentation on define_insn, match_*, et. al.
;; UNSPEC_VOLATILE usage
(define_constants
[(UNSPECV_BLOCKAGE 0)
(UNSPECV_FLUSH_ICACHE 1)])
;; UNSPEC usage
(define_constants
[(UNSPEC_LOAD_SDA_BASE 2)
(UNSPEC_SET_CBIT 3)
(UNSPEC_PIC_LOAD_ADDR 4)
(UNSPEC_GET_PC 5)
(UNSPEC_GOTOFF 6)
])
;; Insn type. Used to default other attribute values.
(define_attr "type"
"int2,int4,load2,load4,load8,store2,store4,store8,shift2,shift4,mul2,div4,uncond_branch,branch,call,multi,misc"
(const_string "misc"))
;; Length in bytes.
(define_attr "length" ""
(cond [(eq_attr "type" "int2,load2,store2,shift2,mul2")
(const_int 2)
(eq_attr "type" "int4,load4,store4,shift4,div4")
(const_int 4)
(eq_attr "type" "multi")
(const_int 8)
(eq_attr "type" "uncond_branch,branch,call")
(const_int 4)]
(const_int 4)))
;; The length here is the length of a single asm. Unfortunately it might be
;; 2 or 4 so we must allow for 4. That's ok though.
(define_asm_attributes
[(set_attr "length" "4")
(set_attr "type" "multi")])
;; Whether an instruction is short (16-bit) or long (32-bit).
(define_attr "insn_size" "short,long"
(if_then_else (eq_attr "type" "int2,load2,store2,shift2,mul2")
(const_string "short")
(const_string "long")))
;; The target CPU we're compiling for.
(define_attr "cpu" "m32r,m32r2,m32rx"
(cond [(match_test "TARGET_M32RX")
(const_string "m32rx")
(match_test "TARGET_M32R2")
(const_string "m32r2")]
(const_string "m32r")))
;; Defines the pipeline where an instruction can be executed on.
;; For the M32R, a short instruction can execute one of the two pipes.
;; For the M32Rx, the restrictions are modelled in the second
;; condition of this attribute definition.
(define_attr "m32r_pipeline" "either,s,o,long"
(cond [(and (eq_attr "cpu" "m32r")
(eq_attr "insn_size" "short"))
(const_string "either")
(eq_attr "insn_size" "!short")
(const_string "long")]
(cond [(eq_attr "type" "int2")
(const_string "either")
(eq_attr "type" "load2,store2,shift2,uncond_branch,branch,call")
(const_string "o")
(eq_attr "type" "mul2")
(const_string "s")]
(const_string "long"))))
;; ::::::::::::::::::::
;; ::
;; :: Pipeline description
;; ::
;; ::::::::::::::::::::
;; This model is based on Chapter 2, Appendix 3 and Appendix 4 of the
;; "M32R-FPU Software Manual", Revision 1.01, plus additional information
;; obtained by our best friend and mine, Google.
;;
;; The pipeline is modelled as a fetch unit, and a core with a memory unit,
;; two execution units, where "fetch" models IF and D, "memory" for MEM1
;; and MEM2, and "EXEC" for E, E1, E2, EM, and EA. Writeback and
;; bypasses are not modelled.
(define_automaton "m32r")
;; We pretend there are two short (16 bits) instruction fetchers. The
;; "s" short fetcher cannot be reserved until the "o" short fetcher is
;; reserved. Some instructions reserve both the left and right fetchers.
;; These fetch units are a hack to get GCC to better pack the instructions
;; for the M32Rx processor, which has two execution pipes.
;;
;; In reality there is only one decoder, which can decode either two 16-bit
;; instructions, or a single 32-bit instruction.
;;
;; Note, "fetch" models both the IF and the D pipeline stages.
;;
;; The m32rx core has two execution pipes. We name them o_E and s_E.
;; In addition, there's a memory unit.
(define_cpu_unit "o_IF,s_IF,o_E,s_E,memory" "m32r")
;; Prevent the s pipe from being reserved before the o pipe.
(absence_set "s_IF" "o_IF")
(absence_set "s_E" "o_E")
;; On the M32Rx, long instructions execute on both pipes, so reserve
;; both fetch slots and both pipes.
(define_reservation "long_IF" "o_IF+s_IF")
(define_reservation "long_E" "o_E+s_E")
;; ::::::::::::::::::::
;; Simple instructions do 4 stages: IF D E WB. WB is not modelled.
;; Hence, ready latency is 1.
(define_insn_reservation "short_left" 1
(and (eq_attr "m32r_pipeline" "o")
(and (eq_attr "insn_size" "short")
(eq_attr "type" "!load2")))
"o_IF,o_E")
(define_insn_reservation "short_right" 1
(and (eq_attr "m32r_pipeline" "s")
(and (eq_attr "insn_size" "short")
(eq_attr "type" "!load2")))
"s_IF,s_E")
(define_insn_reservation "short_either" 1
(and (eq_attr "m32r_pipeline" "either")
(and (eq_attr "insn_size" "short")
(eq_attr "type" "!load2")))
"o_IF|s_IF,o_E|s_E")
(define_insn_reservation "long_m32r" 1
(and (eq_attr "cpu" "m32r")
(and (eq_attr "insn_size" "long")
(eq_attr "type" "!load4,load8")))
"long_IF,long_E")
(define_insn_reservation "long_m32rx" 2
(and (eq_attr "m32r_pipeline" "long")
(and (eq_attr "insn_size" "long")
(eq_attr "type" "!load4,load8")))
"long_IF,long_E")
;; Load/store instructions do 6 stages: IF D E MEM1 MEM2 WB.
;; MEM1 may require more than one cycle depending on locality. We
;; optimistically assume all memory is nearby, i.e. MEM1 takes only
;; one cycle. Hence, ready latency is 3.
;; The M32Rx can do short load/store only on the left pipe.
(define_insn_reservation "short_load_left" 3
(and (eq_attr "m32r_pipeline" "o")
(and (eq_attr "insn_size" "short")
(eq_attr "type" "load2")))
"o_IF,o_E,memory*2")
(define_insn_reservation "short_load" 3
(and (eq_attr "m32r_pipeline" "either")
(and (eq_attr "insn_size" "short")
(eq_attr "type" "load2")))
"s_IF|o_IF,s_E|o_E,memory*2")
(define_insn_reservation "long_load" 3
(and (eq_attr "cpu" "m32r")
(and (eq_attr "insn_size" "long")
(eq_attr "type" "load4,load8")))
"long_IF,long_E,memory*2")
(define_insn_reservation "long_load_m32rx" 3
(and (eq_attr "m32r_pipeline" "long")
(eq_attr "type" "load4,load8"))
"long_IF,long_E,memory*2")
(include "predicates.md")
(include "constraints.md")
;; Expand prologue as RTL
(define_expand "prologue"
[(const_int 1)]
""
"
{
m32r_expand_prologue ();
DONE;
}")
;; Expand epilogue as RTL
(define_expand "epilogue"
[(return)]
""
"
{
m32r_expand_epilogue ();
emit_jump_insn (gen_return_normal ());
DONE;
}")
;; Move instructions.
;;
;; For QI and HI moves, the register must contain the full properly
;; sign-extended value. nonzero_bits assumes this [otherwise
;; SHORT_IMMEDIATES_SIGN_EXTEND must be used, but the comment for it
;; says it's a kludge and the .md files should be fixed instead].
(define_expand "movqi"
[(set (match_operand:QI 0 "general_operand" "")
(match_operand:QI 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], QImode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily.
Objects in the small data area are handled too. */
if (MEM_P (operands[0]))
operands[1] = force_reg (QImode, operands[1]);
}")
(define_insn "*movqi_insn"
[(set (match_operand:QI 0 "move_dest_operand" "=r,r,r,r,r,T,m")
(match_operand:QI 1 "move_src_operand" "r,I,JQR,T,m,r,r"))]
"register_operand (operands[0], QImode) || register_operand (operands[1], QImode)"
"@
mv %0,%1
ldi %0,%#%1
ldi %0,%#%1
ldub %0,%1
ldub %0,%1
stb %1,%0
stb %1,%0"
[(set_attr "type" "int2,int2,int4,load2,load4,store2,store4")
(set_attr "length" "2,2,4,2,4,2,4")])
(define_expand "movhi"
[(set (match_operand:HI 0 "general_operand" "")
(match_operand:HI 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], HImode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily. */
if (MEM_P (operands[0]))
operands[1] = force_reg (HImode, operands[1]);
}")
(define_insn "*movhi_insn"
[(set (match_operand:HI 0 "move_dest_operand" "=r,r,r,r,r,r,T,m")
(match_operand:HI 1 "move_src_operand" "r,I,JQR,K,T,m,r,r"))]
"register_operand (operands[0], HImode) || register_operand (operands[1], HImode)"
"@
mv %0,%1
ldi %0,%#%1
ldi %0,%#%1
ld24 %0,%#%1
lduh %0,%1
lduh %0,%1
sth %1,%0
sth %1,%0"
[(set_attr "type" "int2,int2,int4,int4,load2,load4,store2,store4")
(set_attr "length" "2,2,4,4,2,4,2,4")])
(define_expand "movsi_push"
[(set (mem:SI (pre_dec:SI (match_operand:SI 0 "register_operand" "")))
(match_operand:SI 1 "register_operand" ""))]
""
"")
(define_expand "movsi_pop"
[(set (match_operand:SI 0 "register_operand" "")
(mem:SI (post_inc:SI (match_operand:SI 1 "register_operand" ""))))]
""
"")
(define_expand "movsi"
[(set (match_operand:SI 0 "general_operand" "")
(match_operand:SI 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], SImode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily. */
if (MEM_P (operands[0]))
operands[1] = force_reg (SImode, operands[1]);
/* Small Data Area reference? */
if (small_data_operand (operands[1], SImode))
{
emit_insn (gen_movsi_sda (operands[0], operands[1]));
DONE;
}
/* If medium or large code model, symbols have to be loaded with
seth/add3. */
if (addr32_operand (operands[1], SImode))
{
emit_insn (gen_movsi_addr32 (operands[0], operands[1]));
DONE;
}
}")
;; ??? Do we need a const_double constraint here for large unsigned values?
(define_insn "*movsi_insn"
[(set (match_operand:SI 0 "move_dest_operand" "=r,r,r,r,r,r,r,r,r,T,S,m")
(match_operand:SI 1 "move_src_operand" "r,I,J,MQ,L,n,T,U,m,r,r,r"))]
"register_operand (operands[0], SImode) || register_operand (operands[1], SImode)"
"*
{
if (REG_P (operands[0]) || GET_CODE (operands[1]) == SUBREG)
{
switch (GET_CODE (operands[1]))
{
default:
break;
case REG:
case SUBREG:
return \"mv %0,%1\";
case MEM:
if (GET_CODE (XEXP (operands[1], 0)) == POST_INC
&& XEXP (XEXP (operands[1], 0), 0) == stack_pointer_rtx)
return \"pop %0\";
return \"ld %0,%1\";
case CONST_INT:
if (satisfies_constraint_J (operands[1]))
return \"ldi %0,%#%1\\t; %X1\";
if (satisfies_constraint_M (operands[1]))
return \"ld24 %0,%#%1\\t; %X1\";
if (satisfies_constraint_L (operands[1]))
return \"seth %0,%#%T1\\t; %X1\";
return \"#\";
case CONST:
case SYMBOL_REF:
case LABEL_REF:
if (TARGET_ADDR24)
return \"ld24 %0,%#%1\";
return \"#\";
}
}
else if (MEM_P (operands[0])
&& (REG_P (operands[1]) || GET_CODE (operands[1]) == SUBREG))
{
if (GET_CODE (XEXP (operands[0], 0)) == PRE_DEC
&& XEXP (XEXP (operands[0], 0), 0) == stack_pointer_rtx)
return \"push %1\";
return \"st %1,%0\";
}
gcc_unreachable ();
}"
[(set_attr "type" "int2,int2,int4,int4,int4,multi,load2,load2,load4,store2,store2,store4")
(set_attr "length" "2,2,4,4,4,8,2,2,4,2,2,4")])
; Try to use a four byte / two byte pair for constants not loadable with
; ldi, ld24, seth.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "two_insn_const_operand" ""))]
""
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (ior:SI (match_dup 0) (match_dup 3)))]
"
{
unsigned HOST_WIDE_INT val = INTVAL (operands[1]);
unsigned HOST_WIDE_INT tmp;
int shift;
/* In all cases we will emit two instructions. However we try to
use 2 byte instructions wherever possible. We can assume the
constant isn't loadable with any of ldi, ld24, or seth. */
/* See if we can load a 24-bit unsigned value and invert it. */
if (UINT24_P (~ val))
{
emit_insn (gen_movsi (operands[0], GEN_INT (~ val)));
emit_insn (gen_one_cmplsi2 (operands[0], operands[0]));
DONE;
}
/* See if we can load a 24-bit unsigned value and shift it into place.
0x01fffffe is just beyond ld24's range. */
for (shift = 1, tmp = 0x01fffffe;
shift < 8;
++shift, tmp <<= 1)
{
if ((val & ~tmp) == 0)
{
emit_insn (gen_movsi (operands[0], GEN_INT (val >> shift)));
emit_insn (gen_ashlsi3 (operands[0], operands[0], GEN_INT (shift)));
DONE;
}
}
/* Can't use any two byte insn, fall back to seth/or3. Use ~0xffff instead
of 0xffff0000, since the later fails on a 64-bit host. */
operands[2] = GEN_INT ((val) & ~0xffff);
operands[3] = GEN_INT ((val) & 0xffff);
}")
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(match_operand:SI 1 "seth_add3_operand" ""))]
"TARGET_ADDR32"
[(set (match_dup 0)
(high:SI (match_dup 1)))
(set (match_dup 0)
(lo_sum:SI (match_dup 0)
(match_dup 1)))]
"")
;; Small data area support.
;; The address of _SDA_BASE_ is loaded into a register and all objects in
;; the small data area are indexed off that. This is done for each reference
;; but cse will clean things up for us. We let the compiler choose the
;; register to use so we needn't allocate (and maybe even fix) a special
;; register to use. Since the load and store insns have a 16-bit offset the
;; total size of the data area can be 64K. However, if the data area lives
;; above 16M (24 bits), _SDA_BASE_ will have to be loaded with seth/add3 which
;; would then yield 3 instructions to reference an object [though there would
;; be no net loss if two or more objects were referenced]. The 3 insns can be
;; reduced back to 2 if the size of the small data area were reduced to 32K
;; [then seth + ld/st would work for any object in the area]. Doing this
;; would require special handling of _SDA_BASE_ (its value would be
;; (.sdata + 32K) & 0xffff0000) and reloc computations would be different
;; [I think]. What to do about this is deferred until later and for now we
;; require .sdata to be in the first 16M.
(define_expand "movsi_sda"
[(set (match_dup 2)
(unspec:SI [(const_int 0)] UNSPEC_LOAD_SDA_BASE))
(set (match_operand:SI 0 "register_operand" "")
(lo_sum:SI (match_dup 2)
(match_operand:SI 1 "small_data_operand" "")))]
""
"
{
if (reload_in_progress || reload_completed)
operands[2] = operands[0];
else
operands[2] = gen_reg_rtx (SImode);
}")
(define_insn "*load_sda_base_32"
[(set (match_operand:SI 0 "register_operand" "=r")
(unspec:SI [(const_int 0)] UNSPEC_LOAD_SDA_BASE))]
"TARGET_ADDR32"
"seth %0,%#shigh(_SDA_BASE_)\;add3 %0,%0,%#low(_SDA_BASE_)"
[(set_attr "type" "multi")
(set_attr "length" "8")])
(define_insn "*load_sda_base"
[(set (match_operand:SI 0 "register_operand" "=r")
(unspec:SI [(const_int 0)] UNSPEC_LOAD_SDA_BASE))]
""
"ld24 %0,#_SDA_BASE_"
[(set_attr "type" "int4")
(set_attr "length" "4")])
;; 32-bit address support.
(define_expand "movsi_addr32"
[(set (match_dup 2)
; addr32_operand isn't used because it's too restrictive,
; seth_add3_operand is more general and thus safer.
(high:SI (match_operand:SI 1 "seth_add3_operand" "")))
(set (match_operand:SI 0 "register_operand" "")
(lo_sum:SI (match_dup 2) (match_dup 1)))]
""
"
{
if (reload_in_progress || reload_completed)
operands[2] = operands[0];
else
operands[2] = gen_reg_rtx (SImode);
}")
(define_insn "set_hi_si"
[(set (match_operand:SI 0 "register_operand" "=r")
(high:SI (match_operand 1 "symbolic_operand" "")))]
""
"seth %0,%#shigh(%1)"
[(set_attr "type" "int4")
(set_attr "length" "4")])
(define_insn "lo_sum_si"
[(set (match_operand:SI 0 "register_operand" "=r")
(lo_sum:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "immediate_operand" "in")))]
""
"add3 %0,%1,%#%B2"
[(set_attr "type" "int4")
(set_attr "length" "4")])
(define_expand "movdi"
[(set (match_operand:DI 0 "general_operand" "")
(match_operand:DI 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], DImode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily. */
if (MEM_P (operands[0]))
operands[1] = force_reg (DImode, operands[1]);
}")
(define_insn "*movdi_insn"
[(set (match_operand:DI 0 "move_dest_operand" "=r,r,r,r,m")
(match_operand:DI 1 "move_double_src_operand" "r,nG,F,m,r"))]
"register_operand (operands[0], DImode) || register_operand (operands[1], DImode)"
"#"
[(set_attr "type" "multi,multi,multi,load8,store8")
(set_attr "length" "4,4,16,6,6")])
(define_split
[(set (match_operand:DI 0 "move_dest_operand" "")
(match_operand:DI 1 "move_double_src_operand" ""))]
"reload_completed"
[(match_dup 2)]
"operands[2] = gen_split_move_double (operands);")
;; Floating point move insns.
(define_expand "movsf"
[(set (match_operand:SF 0 "general_operand" "")
(match_operand:SF 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], SFmode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily. */
if (MEM_P (operands[0]))
operands[1] = force_reg (SFmode, operands[1]);
}")
(define_insn "*movsf_insn"
[(set (match_operand:SF 0 "move_dest_operand" "=r,r,r,r,r,T,S,m")
(match_operand:SF 1 "move_src_operand" "r,F,U,S,m,r,r,r"))]
"register_operand (operands[0], SFmode) || register_operand (operands[1], SFmode)"
"@
mv %0,%1
#
ld %0,%1
ld %0,%1
ld %0,%1
st %1,%0
st %1,%0
st %1,%0"
;; ??? Length of alternative 1 is either 2, 4 or 8.
[(set_attr "type" "int2,multi,load2,load2,load4,store2,store2,store4")
(set_attr "length" "2,8,2,2,4,2,2,4")])
(define_split
[(set (match_operand:SF 0 "register_operand" "")
(match_operand:SF 1 "const_double_operand" ""))]
"reload_completed"
[(set (match_dup 2) (match_dup 3))]
"
{
operands[2] = operand_subword (operands[0], 0, 0, SFmode);
operands[3] = operand_subword (operands[1], 0, 0, SFmode);
}")
(define_expand "movdf"
[(set (match_operand:DF 0 "general_operand" "")
(match_operand:DF 1 "general_operand" ""))]
""
"
{
/* Fixup PIC cases. */
if (flag_pic)
{
if (symbolic_operand (operands[1], DFmode))
{
if (reload_in_progress || reload_completed)
operands[1] = m32r_legitimize_pic_address (operands[1], operands[0]);
else
operands[1] = m32r_legitimize_pic_address (operands[1], NULL_RTX);
}
}
/* Everything except mem = const or mem = mem can be done easily. */
if (MEM_P (operands[0]))
operands[1] = force_reg (DFmode, operands[1]);
}")
(define_insn "*movdf_insn"
[(set (match_operand:DF 0 "move_dest_operand" "=r,r,r,m")
(match_operand:DF 1 "move_double_src_operand" "r,F,m,r"))]
"register_operand (operands[0], DFmode) || register_operand (operands[1], DFmode)"
"#"
[(set_attr "type" "multi,multi,load8,store8")
(set_attr "length" "4,16,6,6")])
(define_split
[(set (match_operand:DF 0 "move_dest_operand" "")
(match_operand:DF 1 "move_double_src_operand" ""))]
"reload_completed"
[(match_dup 2)]
"operands[2] = gen_split_move_double (operands);")
;; Zero extension instructions.
(define_insn "zero_extendqihi2"
[(set (match_operand:HI 0 "register_operand" "=r,r,r")
(zero_extend:HI (match_operand:QI 1 "extend_operand" "r,T,m")))]
""
"@
and3 %0,%1,%#255
ldub %0,%1
ldub %0,%1"
[(set_attr "type" "int4,load2,load4")
(set_attr "length" "4,2,4")])
(define_insn "zero_extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(zero_extend:SI (match_operand:QI 1 "extend_operand" "r,T,m")))]
""
"@
and3 %0,%1,%#255
ldub %0,%1
ldub %0,%1"
[(set_attr "type" "int4,load2,load4")
(set_attr "length" "4,2,4")])
(define_insn "zero_extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(zero_extend:SI (match_operand:HI 1 "extend_operand" "r,T,m")))]
""
"@
and3 %0,%1,%#65535
lduh %0,%1
lduh %0,%1"
[(set_attr "type" "int4,load2,load4")
(set_attr "length" "4,2,4")])
;; Signed conversions from a smaller integer to a larger integer
(define_insn "extendqihi2"
[(set (match_operand:HI 0 "register_operand" "=r,r,r")
(sign_extend:HI (match_operand:QI 1 "extend_operand" "0,T,m")))]
""
"@
#
ldb %0,%1
ldb %0,%1"
[(set_attr "type" "multi,load2,load4")
(set_attr "length" "2,2,4")])
(define_split
[(set (match_operand:HI 0 "register_operand" "")
(sign_extend:HI (match_operand:QI 1 "register_operand" "")))]
"reload_completed"
[(match_dup 2)
(match_dup 3)]
"
{
rtx op0 = gen_lowpart (SImode, operands[0]);
rtx shift = GEN_INT (24);
operands[2] = gen_ashlsi3 (op0, op0, shift);
operands[3] = gen_ashrsi3 (op0, op0, shift);
}")
(define_insn "extendqisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:QI 1 "extend_operand" "0,T,m")))]
""
"@
#
ldb %0,%1
ldb %0,%1"
[(set_attr "type" "multi,load2,load4")
(set_attr "length" "4,2,4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(sign_extend:SI (match_operand:QI 1 "register_operand" "")))]
"reload_completed"
[(match_dup 2)
(match_dup 3)]
"
{
rtx shift = GEN_INT (24);
operands[2] = gen_ashlsi3 (operands[0], operands[0], shift);
operands[3] = gen_ashrsi3 (operands[0], operands[0], shift);
}")
(define_insn "extendhisi2"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(sign_extend:SI (match_operand:HI 1 "extend_operand" "0,T,m")))]
""
"@
#
ldh %0,%1
ldh %0,%1"
[(set_attr "type" "multi,load2,load4")
(set_attr "length" "4,2,4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(sign_extend:SI (match_operand:HI 1 "register_operand" "")))]
"reload_completed"
[(match_dup 2)
(match_dup 3)]
"
{
rtx shift = GEN_INT (16);
operands[2] = gen_ashlsi3 (operands[0], operands[0], shift);
operands[3] = gen_ashrsi3 (operands[0], operands[0], shift);
}")
;; Arithmetic instructions.
; ??? Adding an alternative to split add3 of small constants into two
; insns yields better instruction packing but slower code. Adds of small
; values is done a lot.
(define_insn "addsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(plus:SI (match_operand:SI 1 "register_operand" "%0,0,r")
(match_operand:SI 2 "nonmemory_operand" "r,I,J")))]
""
"@
add %0,%2
addi %0,%#%2
add3 %0,%1,%#%2"
[(set_attr "type" "int2,int2,int4")
(set_attr "length" "2,2,4")])
;(define_split
; [(set (match_operand:SI 0 "register_operand" "")
; (plus:SI (match_operand:SI 1 "register_operand" "")
; (match_operand:SI 2 "int8_operand" "")))]
; "reload_completed
; && REGNO (operands[0]) != REGNO (operands[1])
; && satisfies_constraint_I (operands[2])
; && INTVAL (operands[2]) != 0"
; [(set (match_dup 0) (match_dup 1))
; (set (match_dup 0) (plus:SI (match_dup 0) (match_dup 2)))]
; "")
(define_insn "adddi3"
[(set (match_operand:DI 0 "register_operand" "=r")
(plus:DI (match_operand:DI 1 "register_operand" "%0")
(match_operand:DI 2 "register_operand" "r")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "6")])
;; ??? The cmp clears the condition bit. Can we speed up somehow?
(define_split
[(set (match_operand:DI 0 "register_operand" "")
(plus:DI (match_operand:DI 1 "register_operand" "")
(match_operand:DI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"reload_completed"
[(parallel [(set (reg:CC 17)
(const_int 0))
(use (match_dup 4))])
(parallel [(set (match_dup 4)
(plus:SI (match_dup 4)
(plus:SI (match_dup 5)
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])
(parallel [(set (match_dup 6)
(plus:SI (match_dup 6)
(plus:SI (match_dup 7)
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])]
"
{
operands[4] = operand_subword (operands[0], (WORDS_BIG_ENDIAN != 0), 0, DImode);
operands[5] = operand_subword (operands[2], (WORDS_BIG_ENDIAN != 0), 0, DImode);
operands[6] = operand_subword (operands[0], (WORDS_BIG_ENDIAN == 0), 0, DImode);
operands[7] = operand_subword (operands[2], (WORDS_BIG_ENDIAN == 0), 0, DImode);
}")
(define_insn "*clear_c"
[(set (reg:CC 17)
(const_int 0))
(use (match_operand:SI 0 "register_operand" "r"))]
""
"cmp %0,%0"
[(set_attr "type" "int2")
(set_attr "length" "2")])
(define_insn "*add_carry"
[(set (match_operand:SI 0 "register_operand" "=r")
(plus:SI (match_operand:SI 1 "register_operand" "%0")
(plus:SI (match_operand:SI 2 "register_operand" "r")
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))]
""
"addx %0,%2"
[(set_attr "type" "int2")
(set_attr "length" "2")])
(define_insn "subsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"sub %0,%2"
[(set_attr "type" "int2")
(set_attr "length" "2")])
(define_insn "subdi3"
[(set (match_operand:DI 0 "register_operand" "=r")
(minus:DI (match_operand:DI 1 "register_operand" "0")
(match_operand:DI 2 "register_operand" "r")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "6")])
;; ??? The cmp clears the condition bit. Can we speed up somehow?
(define_split
[(set (match_operand:DI 0 "register_operand" "")
(minus:DI (match_operand:DI 1 "register_operand" "")
(match_operand:DI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"reload_completed"
[(parallel [(set (reg:CC 17)
(const_int 0))
(use (match_dup 4))])
(parallel [(set (match_dup 4)
(minus:SI (match_dup 4)
(minus:SI (match_dup 5)
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])
(parallel [(set (match_dup 6)
(minus:SI (match_dup 6)
(minus:SI (match_dup 7)
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))])]
"
{
operands[4] = operand_subword (operands[0], (WORDS_BIG_ENDIAN != 0), 0, DImode);
operands[5] = operand_subword (operands[2], (WORDS_BIG_ENDIAN != 0), 0, DImode);
operands[6] = operand_subword (operands[0], (WORDS_BIG_ENDIAN == 0), 0, DImode);
operands[7] = operand_subword (operands[2], (WORDS_BIG_ENDIAN == 0), 0, DImode);
}")
(define_insn "*sub_carry"
[(set (match_operand:SI 0 "register_operand" "=r")
(minus:SI (match_operand:SI 1 "register_operand" "%0")
(minus:SI (match_operand:SI 2 "register_operand" "r")
(ne:SI (reg:CC 17) (const_int 0)))))
(set (reg:CC 17)
(unspec:CC [(const_int 0)] UNSPEC_SET_CBIT))]
""
"subx %0,%2"
[(set_attr "type" "int2")
(set_attr "length" "2")])
; Multiply/Divide instructions.
(define_insn "mulhisi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "r"))
(sign_extend:SI (match_operand:HI 2 "register_operand" "r"))))]
""
"mullo %1,%2\;mvfacmi %0"
[(set_attr "type" "multi")
(set_attr "length" "4")])
(define_insn "mulsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mult:SI (match_operand:SI 1 "register_operand" "%0")
(match_operand:SI 2 "register_operand" "r")))]
""
"mul %0,%2"
[(set_attr "type" "mul2")
(set_attr "length" "2")])
(define_insn "divsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(div:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"div %0,%2"
[(set_attr "type" "div4")
(set_attr "length" "4")])
(define_insn "udivsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(udiv:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"divu %0,%2"
[(set_attr "type" "div4")
(set_attr "length" "4")])
(define_insn "modsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(mod:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"rem %0,%2"
[(set_attr "type" "div4")
(set_attr "length" "4")])
(define_insn "umodsi3"
[(set (match_operand:SI 0 "register_operand" "=r")
(umod:SI (match_operand:SI 1 "register_operand" "0")
(match_operand:SI 2 "register_operand" "r")))]
""
"remu %0,%2"
[(set_attr "type" "div4")
(set_attr "length" "4")])
;; Boolean instructions.
;;
;; We don't define the DImode versions as expand_binop does a good enough job.
;; And if it doesn't it should be fixed.
(define_insn "andsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(and:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,K")))]
""
"*
{
/* If we are worried about space, see if we can break this up into two
short instructions, which might eliminate a NOP being inserted. */
if (optimize_size
&& m32r_not_same_reg (operands[0], operands[1])
&& satisfies_constraint_I (operands[2]))
return \"#\";
else if (CONST_INT_P (operands[2]))
return \"and3 %0,%1,%#%X2\";
return \"and %0,%2\";
}"
[(set_attr "type" "int2,int4")
(set_attr "length" "2,4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(and:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "int8_operand" "")))]
"optimize_size && m32r_not_same_reg (operands[0], operands[1])"
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (and:SI (match_dup 0) (match_dup 1)))]
"")
(define_insn "iorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ior:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,K")))]
""
"*
{
/* If we are worried about space, see if we can break this up into two
short instructions, which might eliminate a NOP being inserted. */
if (optimize_size
&& m32r_not_same_reg (operands[0], operands[1])
&& satisfies_constraint_I (operands[2]))
return \"#\";
else if (CONST_INT_P (operands[2]))
return \"or3 %0,%1,%#%X2\";
return \"or %0,%2\";
}"
[(set_attr "type" "int2,int4")
(set_attr "length" "2,4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ior:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "int8_operand" "")))]
"optimize_size && m32r_not_same_reg (operands[0], operands[1])"
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (ior:SI (match_dup 0) (match_dup 1)))]
"")
(define_insn "xorsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(xor:SI (match_operand:SI 1 "register_operand" "%0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,K")))]
""
"*
{
/* If we are worried about space, see if we can break this up into two
short instructions, which might eliminate a NOP being inserted. */
if (optimize_size
&& m32r_not_same_reg (operands[0], operands[1])
&& satisfies_constraint_I (operands[2]))
return \"#\";
else if (CONST_INT_P (operands[2]))
return \"xor3 %0,%1,%#%X2\";
return \"xor %0,%2\";
}"
[(set_attr "type" "int2,int4")
(set_attr "length" "2,4")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(xor:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "int8_operand" "")))]
"optimize_size && m32r_not_same_reg (operands[0], operands[1])"
[(set (match_dup 0) (match_dup 2))
(set (match_dup 0) (xor:SI (match_dup 0) (match_dup 1)))]
"")
(define_insn "negsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(neg:SI (match_operand:SI 1 "register_operand" "r")))]
""
"neg %0,%1"
[(set_attr "type" "int2")
(set_attr "length" "2")])
(define_insn "one_cmplsi2"
[(set (match_operand:SI 0 "register_operand" "=r")
(not:SI (match_operand:SI 1 "register_operand" "r")))]
""
"not %0,%1"
[(set_attr "type" "int2")
(set_attr "length" "2")])
;; Shift instructions.
(define_insn "ashlsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(ashift:SI (match_operand:SI 1 "register_operand" "0,0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))]
""
"@
sll %0,%2
slli %0,%#%2
sll3 %0,%1,%#%2"
[(set_attr "type" "shift2,shift2,shift4")
(set_attr "length" "2,2,4")])
(define_insn "ashrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(ashiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))]
""
"@
sra %0,%2
srai %0,%#%2
sra3 %0,%1,%#%2"
[(set_attr "type" "shift2,shift2,shift4")
(set_attr "length" "2,2,4")])
(define_insn "lshrsi3"
[(set (match_operand:SI 0 "register_operand" "=r,r,r")
(lshiftrt:SI (match_operand:SI 1 "register_operand" "0,0,r")
(match_operand:SI 2 "reg_or_uint16_operand" "r,O,K")))]
""
"@
srl %0,%2
srli %0,%#%2
srl3 %0,%1,%#%2"
[(set_attr "type" "shift2,shift2,shift4")
(set_attr "length" "2,2,4")])
;; Compare instructions.
;; This controls RTL generation and register allocation.
;; We generate RTL for comparisons and branches by having the cmpxx
;; patterns store away the operands. Then the bcc patterns
;; emit RTL for both the compare and the branch.
;;
;; On the m32r it is more efficient to use the bxxz instructions and
;; thus merge the compare and branch into one instruction, so they are
;; preferred.
(define_insn "cmp_eqsi_zero_insn"
[(set (reg:CC 17)
(eq:CC (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_zero_operand" "r,P")))]
"TARGET_M32RX || TARGET_M32R2"
"@
cmpeq %0, %1
cmpz %0"
[(set_attr "type" "int4")
(set_attr "length" "4")])
;; The cmp_xxx_insn patterns set the condition bit to the result of the
;; comparison. There isn't a "compare equal" instruction so cmp_eqsi_insn
;; is quite inefficient. However, it is rarely used.
(define_insn "cmp_eqsi_insn"
[(set (reg:CC 17)
(eq:CC (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_cmp_int16_operand" "r,P")))
(clobber (match_scratch:SI 2 "=&r,&r"))]
""
"*
{
if (which_alternative == 0)
{
return \"mv %2,%0\;sub %2,%1\;cmpui %2,#1\";
}
else
{
if (INTVAL (operands [1]) == 0)
return \"cmpui %0, #1\";
else if (REGNO (operands [2]) == REGNO (operands [0]))
return \"addi %0,%#%N1\;cmpui %2,#1\";
else
return \"add3 %2,%0,%#%N1\;cmpui %2,#1\";
}
}"
[(set_attr "type" "multi,multi")
(set_attr "length" "8,8")])
(define_insn "cmp_ltsi_insn"
[(set (reg:CC 17)
(lt:CC (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_int16_operand" "r,J")))]
""
"@
cmp %0,%1
cmpi %0,%#%1"
[(set_attr "type" "int2,int4")
(set_attr "length" "2,4")])
(define_insn "cmp_ltusi_insn"
[(set (reg:CC 17)
(ltu:CC (match_operand:SI 0 "register_operand" "r,r")
(match_operand:SI 1 "reg_or_int16_operand" "r,J")))]
""
"@
cmpu %0,%1
cmpui %0,%#%1"
[(set_attr "type" "int2,int4")
(set_attr "length" "2,4")])
;; These control RTL generation for conditional jump insns.
(define_expand "cbranchsi4"
; the comparison is emitted by gen_compare if needed.
[(set (pc)
(if_then_else (match_operator 0 "ordered_comparison_operator"
[(match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_cmp_int16_operand" "")])
(label_ref (match_operand 3 "" ""))
(pc)))]
""
"
{
operands[0] = gen_compare (GET_CODE (operands[0]), operands[1], operands[2], FALSE);
operands[1] = XEXP (operands[0], 0);
operands[2] = XEXP (operands[0], 1);
}")
;; Now match both normal and inverted jump.
(define_insn "*branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "eqne_comparison_operator"
[(reg 17) (const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"*
{
static char instruction[40];
sprintf (instruction, \"%s%s %%l0\",
(GET_CODE (operands[1]) == NE) ? \"bc\" : \"bnc\",
(get_attr_length (insn) == 2) ? \".s\" : \"\");
return instruction;
}"
[(set_attr "type" "branch")
; cf PR gcc/28508
; We use 300/600 instead of 512,1024 to account for inaccurate insn
; lengths and insn alignments that are complex to track.
; It's not important that we be hyper-precise here. It may be more
; important blah blah blah when the chip supports parallel execution
; blah blah blah but until then blah blah blah this is simple and
; suffices.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 300))
(const_int 600))
(const_int 2)
(const_int 4)))])
(define_insn "*rev_branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "eqne_comparison_operator"
[(reg 17) (const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
;"REVERSIBLE_CC_MODE (GET_MODE (XEXP (operands[1], 0)))"
""
"*
{
static char instruction[40];
sprintf (instruction, \"%s%s %%l0\",
(GET_CODE (operands[1]) == EQ) ? \"bc\" : \"bnc\",
(get_attr_length (insn) == 2) ? \".s\" : \"\");
return instruction;
}"
[(set_attr "type" "branch")
; cf PR gcc/28508
; We use 300/600 instead of 512,1024 to account for inaccurate insn
; lengths and insn alignments that are complex to track.
; It's not important that we be hyper-precise here. It may be more
; important blah blah blah when the chip supports parallel execution
; blah blah blah but until then blah blah blah this is simple and
; suffices.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 300))
(const_int 600))
(const_int 2)
(const_int 4)))])
; reg/reg compare and branch insns
(define_insn "*reg_branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "eqne_comparison_operator"
[(match_operand:SI 2 "register_operand" "r")
(match_operand:SI 3 "register_operand" "r")])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"*
{
/* Is branch target reachable with beq/bne? */
if (get_attr_length (insn) == 4)
{
if (GET_CODE (operands[1]) == EQ)
return \"beq %2,%3,%l0\";
else
return \"bne %2,%3,%l0\";
}
else
{
if (GET_CODE (operands[1]) == EQ)
return \"bne %2,%3,1f\;bra %l0\;1:\";
else
return \"beq %2,%3,1f\;bra %l0\;1:\";
}
}"
[(set_attr "type" "branch")
; We use 25000/50000 instead of 32768/65536 to account for slot filling
; which is complex to track and inaccurate length specs.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 25000))
(const_int 50000))
(const_int 4)
(const_int 8)))])
(define_insn "*rev_reg_branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "eqne_comparison_operator"
[(match_operand:SI 2 "register_operand" "r")
(match_operand:SI 3 "register_operand" "r")])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"*
{
/* Is branch target reachable with beq/bne? */
if (get_attr_length (insn) == 4)
{
if (GET_CODE (operands[1]) == NE)
return \"beq %2,%3,%l0\";
else
return \"bne %2,%3,%l0\";
}
else
{
if (GET_CODE (operands[1]) == NE)
return \"bne %2,%3,1f\;bra %l0\;1:\";
else
return \"beq %2,%3,1f\;bra %l0\;1:\";
}
}"
[(set_attr "type" "branch")
; We use 25000/50000 instead of 32768/65536 to account for slot filling
; which is complex to track and inaccurate length specs.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 25000))
(const_int 50000))
(const_int 4)
(const_int 8)))])
; reg/zero compare and branch insns
(define_insn "*zero_branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "signed_comparison_operator"
[(match_operand:SI 2 "register_operand" "r")
(const_int 0)])
(label_ref (match_operand 0 "" ""))
(pc)))]
""
"*
{
const char *br,*invbr;
char asmtext[40];
switch (GET_CODE (operands[1]))
{
case EQ : br = \"eq\"; invbr = \"ne\"; break;
case NE : br = \"ne\"; invbr = \"eq\"; break;
case LE : br = \"le\"; invbr = \"gt\"; break;
case GT : br = \"gt\"; invbr = \"le\"; break;
case LT : br = \"lt\"; invbr = \"ge\"; break;
case GE : br = \"ge\"; invbr = \"lt\"; break;
default: gcc_unreachable ();
}
/* Is branch target reachable with bxxz? */
if (get_attr_length (insn) == 4)
{
sprintf (asmtext, \"b%sz %%2,%%l0\", br);
output_asm_insn (asmtext, operands);
}
else
{
sprintf (asmtext, \"b%sz %%2,1f\;bra %%l0\;1:\", invbr);
output_asm_insn (asmtext, operands);
}
return \"\";
}"
[(set_attr "type" "branch")
; We use 25000/50000 instead of 32768/65536 to account for slot filling
; which is complex to track and inaccurate length specs.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 25000))
(const_int 50000))
(const_int 4)
(const_int 8)))])
(define_insn "*rev_zero_branch_insn"
[(set (pc)
(if_then_else (match_operator 1 "eqne_comparison_operator"
[(match_operand:SI 2 "register_operand" "r")
(const_int 0)])
(pc)
(label_ref (match_operand 0 "" ""))))]
""
"*
{
const char *br,*invbr;
char asmtext[40];
switch (GET_CODE (operands[1]))
{
case EQ : br = \"eq\"; invbr = \"ne\"; break;
case NE : br = \"ne\"; invbr = \"eq\"; break;
case LE : br = \"le\"; invbr = \"gt\"; break;
case GT : br = \"gt\"; invbr = \"le\"; break;
case LT : br = \"lt\"; invbr = \"ge\"; break;
case GE : br = \"ge\"; invbr = \"lt\"; break;
default: gcc_unreachable ();
}
/* Is branch target reachable with bxxz? */
if (get_attr_length (insn) == 4)
{
sprintf (asmtext, \"b%sz %%2,%%l0\", invbr);
output_asm_insn (asmtext, operands);
}
else
{
sprintf (asmtext, \"b%sz %%2,1f\;bra %%l0\;1:\", br);
output_asm_insn (asmtext, operands);
}
return \"\";
}"
[(set_attr "type" "branch")
; We use 25000/50000 instead of 32768/65536 to account for slot filling
; which is complex to track and inaccurate length specs.
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 25000))
(const_int 50000))
(const_int 4)
(const_int 8)))])
;; S operations to set a register to 1/0 based on a comparison
(define_expand "cstoresi4"
[(match_operand:SI 0 "register_operand" "")
(match_operator:SI 1 "ordered_comparison_operator"
[(match_operand:SI 2 "register_operand" "")
(match_operand:SI 3 "reg_or_cmp_int16_operand" "")])]
""
"
{
if (GET_MODE (operands[0]) != SImode)
FAIL;
if (!gen_cond_store (GET_CODE (operands[1]),
operands[0], operands[2], operands[3]))
FAIL;
DONE;
}")
(define_insn "seq_insn_m32rx"
[(set (match_operand:SI 0 "register_operand" "=r")
(eq:SI (match_operand:SI 1 "register_operand" "%r")
(match_operand:SI 2 "reg_or_zero_operand" "rP")))
(clobber (reg:CC 17))]
"TARGET_M32RX || TARGET_M32R2"
"#"
[(set_attr "type" "multi")
(set_attr "length" "6")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(eq:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_zero_operand" "")))
(clobber (reg:CC 17))]
"TARGET_M32RX || TARGET_M32R2"
[(set (reg:CC 17)
(eq:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))]
"")
(define_insn "seq_zero_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(eq:SI (match_operand:SI 1 "register_operand" "r")
(const_int 0)))
(clobber (reg:CC 17))]
"TARGET_M32R"
"#"
[(set_attr "type" "multi")
(set_attr "length" "6")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(eq:SI (match_operand:SI 1 "register_operand" "")
(const_int 0)))
(clobber (reg:CC 17))]
"TARGET_M32R"
[(match_dup 3)]
"
{
rtx op0 = operands[0];
rtx op1 = operands[1];
start_sequence ();
emit_insn (gen_cmp_ltusi_insn (op1, const1_rtx));
emit_insn (gen_movcc_insn (op0));
operands[3] = get_insns ();
end_sequence ();
}")
(define_insn "seq_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r,??r,r")
(eq:SI (match_operand:SI 1 "register_operand" "r,r,r,r")
(match_operand:SI 2 "reg_or_eq_int16_operand" "r,r,r,PK")))
(clobber (reg:CC 17))
(clobber (match_scratch:SI 3 "=1,2,&r,r"))]
"TARGET_M32R"
"#"
[(set_attr "type" "multi")
(set_attr "length" "8,8,10,10")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(eq:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_eq_int16_operand" "")))
(clobber (reg:CC 17))
(clobber (match_scratch:SI 3 ""))]
"TARGET_M32R && reload_completed"
[(match_dup 4)]
"
{
rtx op0 = operands[0];
rtx op1 = operands[1];
rtx op2 = operands[2];
rtx op3 = operands[3];
HOST_WIDE_INT value;
if (REG_P (op2) && REG_P (op3)
&& REGNO (op2) == REGNO (op3))
{
op1 = operands[2];
op2 = operands[1];
}
start_sequence ();
if (REG_P (op1) && REG_P (op3)
&& REGNO (op1) != REGNO (op3))
{
emit_move_insn (op3, op1);
op1 = op3;
}
if (satisfies_constraint_P (op2) && (value = INTVAL (op2)) != 0)
emit_insn (gen_addsi3 (op3, op1, GEN_INT (-value)));
else
emit_insn (gen_xorsi3 (op3, op1, op2));
emit_insn (gen_cmp_ltusi_insn (op3, const1_rtx));
emit_insn (gen_movcc_insn (op0));
operands[4] = get_insns ();
end_sequence ();
}")
(define_insn "sne_zero_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(ne:SI (match_operand:SI 1 "register_operand" "r")
(const_int 0)))
(clobber (reg:CC 17))
(clobber (match_scratch:SI 2 "=&r"))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "6")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ne:SI (match_operand:SI 1 "register_operand" "")
(const_int 0)))
(clobber (reg:CC 17))
(clobber (match_scratch:SI 2 ""))]
"reload_completed"
[(set (match_dup 2)
(const_int 0))
(set (reg:CC 17)
(ltu:CC (match_dup 2)
(match_dup 1)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))]
"")
(define_insn "slt_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(lt:SI (match_operand:SI 1 "register_operand" "r,r")
(match_operand:SI 2 "reg_or_int16_operand" "r,J")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "4,6")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(lt:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
""
[(set (reg:CC 17)
(lt:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))]
"")
(define_insn "sle_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(le:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "8")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(le:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"!optimize_size"
[(set (reg:CC 17)
(lt:CC (match_dup 2)
(match_dup 1)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(xor:SI (match_dup 0)
(const_int 1)))]
"")
;; If optimizing for space, use -(reg - 1) to invert the comparison rather than
;; xor reg,reg,1 which might eliminate a NOP being inserted.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(le:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"optimize_size"
[(set (reg:CC 17)
(lt:CC (match_dup 2)
(match_dup 1)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(plus:SI (match_dup 0)
(const_int -1)))
(set (match_dup 0)
(neg:SI (match_dup 0)))]
"")
(define_insn "sge_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ge:SI (match_operand:SI 1 "register_operand" "r,r")
(match_operand:SI 2 "reg_or_int16_operand" "r,J")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "8,10")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ge:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
"!optimize_size"
[(set (reg:CC 17)
(lt:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(xor:SI (match_dup 0)
(const_int 1)))]
"")
;; If optimizing for space, use -(reg - 1) to invert the comparison rather than
;; xor reg,reg,1 which might eliminate a NOP being inserted.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ge:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
"optimize_size"
[(set (reg:CC 17)
(lt:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(plus:SI (match_dup 0)
(const_int -1)))
(set (match_dup 0)
(neg:SI (match_dup 0)))]
"")
(define_insn "sltu_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(ltu:SI (match_operand:SI 1 "register_operand" "r,r")
(match_operand:SI 2 "reg_or_int16_operand" "r,J")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "6,8")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(ltu:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
""
[(set (reg:CC 17)
(ltu:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))]
"")
(define_insn "sleu_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(leu:SI (match_operand:SI 1 "register_operand" "r")
(match_operand:SI 2 "register_operand" "r")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "8")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(leu:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"!optimize_size"
[(set (reg:CC 17)
(ltu:CC (match_dup 2)
(match_dup 1)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(xor:SI (match_dup 0)
(const_int 1)))]
"")
;; If optimizing for space, use -(reg - 1) to invert the comparison rather than
;; xor reg,reg,1 which might eliminate a NOP being inserted.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(leu:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "register_operand" "")))
(clobber (reg:CC 17))]
"optimize_size"
[(set (reg:CC 17)
(ltu:CC (match_dup 2)
(match_dup 1)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(plus:SI (match_dup 0)
(const_int -1)))
(set (match_dup 0)
(neg:SI (match_dup 0)))]
"")
(define_insn "sgeu_insn"
[(set (match_operand:SI 0 "register_operand" "=r,r")
(geu:SI (match_operand:SI 1 "register_operand" "r,r")
(match_operand:SI 2 "reg_or_int16_operand" "r,J")))
(clobber (reg:CC 17))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "8,10")])
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(geu:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
"!optimize_size"
[(set (reg:CC 17)
(ltu:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(xor:SI (match_dup 0)
(const_int 1)))]
"")
;; If optimizing for space, use -(reg - 1) to invert the comparison rather than
;; xor reg,reg,1 which might eliminate a NOP being inserted.
(define_split
[(set (match_operand:SI 0 "register_operand" "")
(geu:SI (match_operand:SI 1 "register_operand" "")
(match_operand:SI 2 "reg_or_int16_operand" "")))
(clobber (reg:CC 17))]
"optimize_size"
[(set (reg:CC 17)
(ltu:CC (match_dup 1)
(match_dup 2)))
(set (match_dup 0)
(ne:SI (reg:CC 17) (const_int 0)))
(set (match_dup 0)
(plus:SI (match_dup 0)
(const_int -1)))
(set (match_dup 0)
(neg:SI (match_dup 0)))]
"")
(define_insn "movcc_insn"
[(set (match_operand:SI 0 "register_operand" "=r")
(ne:SI (reg:CC 17) (const_int 0)))]
""
"mvfc %0, cbr"
[(set_attr "type" "misc")
(set_attr "length" "2")])
;; Unconditional and other jump instructions.
(define_insn "jump"
[(set (pc) (label_ref (match_operand 0 "" "")))]
""
"bra %l0"
[(set_attr "type" "uncond_branch")
(set (attr "length") (if_then_else (ltu (plus (minus (match_dup 0) (pc))
(const_int 400))
(const_int 800))
(const_int 2)
(const_int 4)))])
(define_insn "indirect_jump"
[(set (pc) (match_operand:SI 0 "address_operand" "p"))]
""
"jmp %a0"
[(set_attr "type" "uncond_branch")
(set_attr "length" "2")])
(define_insn "return_lr"
[(parallel [(return) (use (reg:SI 14))])]
""
"jmp lr"
[(set_attr "type" "uncond_branch")
(set_attr "length" "2")])
(define_insn "return_rte"
[(return)]
""
"rte"
[(set_attr "type" "uncond_branch")
(set_attr "length" "2")])
(define_expand "return"
[(return)]
"direct_return ()"
"
{
emit_jump_insn (gen_return_lr ());
DONE;
}")
(define_expand "return_normal"
[(return)]
"!direct_return ()"
"
{
enum m32r_function_type fn_type;
fn_type = m32r_compute_function_type (current_function_decl);
if (M32R_INTERRUPT_P (fn_type))
{
emit_jump_insn (gen_return_rte ());
DONE;
}
emit_jump_insn (gen_return_lr ());
DONE;
}")
(define_expand "tablejump"
[(parallel [(set (pc) (match_operand 0 "register_operand" "r"))
(use (label_ref (match_operand 1 "" "")))])]
""
"
{
/* In pic mode, our address differences are against the base of the
table. Add that base value back in; CSE ought to be able to combine
the two address loads. */
if (flag_pic)
{
rtx tmp, tmp2;
tmp = gen_rtx_LABEL_REF (Pmode, operands[1]);
tmp2 = operands[0];
tmp = gen_rtx_PLUS (Pmode, tmp2, tmp);
operands[0] = memory_address (Pmode, tmp);
}
}")
(define_insn "*tablejump_insn"
[(set (pc) (match_operand:SI 0 "address_operand" "p"))
(use (label_ref (match_operand 1 "" "")))]
""
"jmp %a0"
[(set_attr "type" "uncond_branch")
(set_attr "length" "2")])
(define_expand "call"
;; operands[1] is stack_size_rtx
;; operands[2] is next_arg_register
[(parallel [(call (match_operand:SI 0 "call_operand" "")
(match_operand 1 "" ""))
(clobber (reg:SI 14))])]
""
"
{
if (flag_pic)
crtl->uses_pic_offset_table = 1;
}")
(define_insn "*call_via_reg"
[(call (mem:SI (match_operand:SI 0 "register_operand" "r"))
(match_operand 1 "" ""))
(clobber (reg:SI 14))]
""
"jl %0"
[(set_attr "type" "call")
(set_attr "length" "2")])
(define_insn "*call_via_label"
[(call (mem:SI (match_operand:SI 0 "call_address_operand" ""))
(match_operand 1 "" ""))
(clobber (reg:SI 14))]
""
"*
{
int call26_p = call26_operand (operands[0], FUNCTION_MODE);
if (! call26_p)
{
/* We may not be able to reach with a `bl' insn so punt and leave it to
the linker.
We do this here, rather than doing a force_reg in the define_expand
so these insns won't be separated, say by scheduling, thus simplifying
the linker. */
return \"seth r14,%T0\;add3 r14,r14,%B0\;jl r14\";
}
else
return \"bl %0\";
}"
[(set_attr "type" "call")
(set (attr "length")
(if_then_else (not (match_test "call26_operand (operands[0], FUNCTION_MODE)"))
(const_int 12) ; 10 + 2 for nop filler
; The return address must be on a 4 byte boundary so
; there's no point in using a value of 2 here. A 2 byte
; insn may go in the left slot but we currently can't
; use such knowledge.
(const_int 4)))])
(define_expand "call_value"
;; operand 2 is stack_size_rtx
;; operand 3 is next_arg_register
[(parallel [(set (match_operand 0 "register_operand" "=r")
(call (match_operand:SI 1 "call_operand" "")
(match_operand 2 "" "")))
(clobber (reg:SI 14))])]
""
"
{
if (flag_pic)
crtl->uses_pic_offset_table = 1;
}")
(define_insn "*call_value_via_reg"
[(set (match_operand 0 "register_operand" "=r")
(call (mem:SI (match_operand:SI 1 "register_operand" "r"))
(match_operand 2 "" "")))
(clobber (reg:SI 14))]
""
"jl %1"
[(set_attr "type" "call")
(set_attr "length" "2")])
(define_insn "*call_value_via_label"
[(set (match_operand 0 "register_operand" "=r")
(call (mem:SI (match_operand:SI 1 "call_address_operand" ""))
(match_operand 2 "" "")))
(clobber (reg:SI 14))]
""
"*
{
int call26_p = call26_operand (operands[1], FUNCTION_MODE);
if (flag_pic)
crtl->uses_pic_offset_table = 1;
if (! call26_p)
{
/* We may not be able to reach with a `bl' insn so punt and leave it to
the linker.
We do this here, rather than doing a force_reg in the define_expand
so these insns won't be separated, say by scheduling, thus simplifying
the linker. */
return \"seth r14,%T1\;add3 r14,r14,%B1\;jl r14\";
}
else
return \"bl %1\";
}"
[(set_attr "type" "call")
(set (attr "length")
(if_then_else (not (match_test "call26_operand (operands[1], FUNCTION_MODE)"))
(const_int 12) ; 10 + 2 for nop filler
; The return address must be on a 4 byte boundary so
; there's no point in using a value of 2 here. A 2 byte
; insn may go in the left slot but we currently can't
; use such knowledge.
(const_int 4)))])
(define_insn "nop"
[(const_int 0)]
""
"nop"
[(set_attr "type" "int2")
(set_attr "length" "2")])
;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and
;; all of memory. This blocks insns from being moved across this point.
(define_insn "blockage"
[(unspec_volatile [(const_int 0)] UNSPECV_BLOCKAGE)]
""
"")
;; Special pattern to flush the icache.
(define_insn "flush_icache"
[(unspec_volatile [(match_operand 0 "memory_operand" "m")]
UNSPECV_FLUSH_ICACHE)
(match_operand 1 "" "")
(clobber (reg:SI 17))]
""
"* return \"trap %#%1 ; flush-icache\";"
[(set_attr "type" "int4")
(set_attr "length" "4")])
;; Speed up fabs and provide correct sign handling for -0
(define_insn "absdf2"
[(set (match_operand:DF 0 "register_operand" "=r")
(abs:DF (match_operand:DF 1 "register_operand" "0")))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "4")])
(define_split
[(set (match_operand:DF 0 "register_operand" "")
(abs:DF (match_operand:DF 1 "register_operand" "")))]
"reload_completed"
[(set (match_dup 2)
(ashift:SI (match_dup 2)
(const_int 1)))
(set (match_dup 2)
(lshiftrt:SI (match_dup 2)
(const_int 1)))]
"operands[2] = gen_highpart (SImode, operands[0]);")
(define_insn "abssf2"
[(set (match_operand:SF 0 "register_operand" "=r")
(abs:SF (match_operand:SF 1 "register_operand" "0")))]
""
"#"
[(set_attr "type" "multi")
(set_attr "length" "4")])
(define_split
[(set (match_operand:SF 0 "register_operand" "")
(abs:SF (match_operand:SF 1 "register_operand" "")))]
"reload_completed"
[(set (match_dup 2)
(ashift:SI (match_dup 2)
(const_int 1)))
(set (match_dup 2)
(lshiftrt:SI (match_dup 2)
(const_int 1)))]
"operands[2] = gen_highpart (SImode, operands[0]);")
;; Conditional move instructions
;; Based on those done for the d10v
(define_expand "movsicc"
[
(set (match_operand:SI 0 "register_operand" "r")
(if_then_else:SI (match_operand 1 "" "")
(match_operand:SI 2 "conditional_move_operand" "O")
(match_operand:SI 3 "conditional_move_operand" "O")
)
)
]
""
"
{
if (! zero_and_one (operands [2], operands [3]))
FAIL;
/* Generate the comparison that will set the carry flag. */
operands[1] = gen_compare (GET_CODE (operands[1]), XEXP (operands[1], 0),
XEXP (operands[1], 1), TRUE);
/* See other movsicc pattern below for reason why. */
emit_insn (gen_blockage ());
}")
;; Generate the conditional instructions based on how the carry flag is examined.
(define_insn "*movsicc_internal"
[(set (match_operand:SI 0 "register_operand" "=r")
(if_then_else:SI (match_operand 1 "carry_compare_operand" "")
(match_operand:SI 2 "conditional_move_operand" "O")
(match_operand:SI 3 "conditional_move_operand" "O")
)
)]
"zero_and_one (operands [2], operands[3])"
"* return emit_cond_move (operands, insn);"
[(set_attr "type" "multi")
(set_attr "length" "8")
]
)
;; Block moves, see m32r.c for more details.
;; Argument 0 is the destination
;; Argument 1 is the source
;; Argument 2 is the length
;; Argument 3 is the alignment
(define_expand "movmemsi"
[(parallel [(set (match_operand:BLK 0 "general_operand" "")
(match_operand:BLK 1 "general_operand" ""))
(use (match_operand:SI 2 "immediate_operand" ""))
(use (match_operand:SI 3 "immediate_operand" ""))])]
""
"
{
if (operands[0]) /* Avoid unused code messages. */
{
if (m32r_expand_block_move (operands))
DONE;
else
FAIL;
}
}")
;; Insn generated by block moves
(define_insn "movmemsi_internal"
[(set (mem:BLK (match_operand:SI 0 "register_operand" "r")) ;; destination
(mem:BLK (match_operand:SI 1 "register_operand" "r"))) ;; source
(use (match_operand:SI 2 "m32r_block_immediate_operand" "J"));; # bytes to move
(set (match_operand:SI 3 "register_operand" "=0")
(plus:SI (minus (match_dup 2) (const_int 4))
(match_dup 0)))
(set (match_operand:SI 4 "register_operand" "=1")
(plus:SI (match_dup 1)
(match_dup 2)))
(clobber (match_scratch:SI 5 "=&r")) ;; temp1
(clobber (match_scratch:SI 6 "=&r"))] ;; temp2
""
"* m32r_output_block_move (insn, operands); return \"\"; "
[(set_attr "type" "store8")
(set_attr "length" "72")]) ;; Maximum
;; PIC
/* When generating pic, we need to load the symbol offset into a register.
So that the optimizer does not confuse this with a normal symbol load
we use an unspec. The offset will be loaded from a constant pool entry,
since that is the only type of relocation we can use. */
(define_insn "pic_load_addr"
[(set (match_operand:SI 0 "register_operand" "=r")
(unspec:SI [(match_operand 1 "" "")] UNSPEC_PIC_LOAD_ADDR))]
"flag_pic"
"ld24 %0,%#%1"
[(set_attr "type" "int4")])
(define_insn "gotoff_load_addr"
[(set (match_operand:SI 0 "register_operand" "=r")
(unspec:SI [(match_operand 1 "" "")] UNSPEC_GOTOFF))]
"flag_pic"
"seth %0, %#shigh(%1@GOTOFF)\;add3 %0, %0, low(%1@GOTOFF)"
[(set_attr "type" "int4")
(set_attr "length" "8")])
;; Load program counter insns.
(define_insn "get_pc"
[(clobber (reg:SI 14))
(set (match_operand 0 "register_operand" "=r,r")
(unspec [(match_operand 1 "" "")] UNSPEC_GET_PC))
(use (match_operand:SI 2 "immediate_operand" "W,i"))]
"flag_pic"
"@
bl.s .+4\;seth %0,%#shigh(%1)\;add3 %0,%0,%#low(%1+4)\;add %0,lr
bl.s .+4\;ld24 %0,%#%1\;add %0,lr"
[(set_attr "length" "12,8")])
(define_expand "builtin_setjmp_receiver"
[(label_ref (match_operand 0 "" ""))]
"flag_pic"
"
{
m32r_load_pic_register ();
DONE;
}")