2014-05-22 Release Manager * GCC 4.8.3 released. 2014-05-15 Peter Bergner Backport from mainline 2014-05-15 Peter Bergner PR target/61193 * config/rs6000/htmxlintrin.h (_HTM_TBEGIN_STARTED): New define. (__TM_simple_begin): Use it. (__TM_begin): Likewise. 2014-05-14 Eric Botcazou * config/sparc/sparc-protos.h (sparc_absnegfloat_split_legitimate): Delete. * config/sparc/sparc.c (sparc_absnegfloat_split_legitimate): Likewise. * config/sparc/sparc.md (fptype_ut699): New attribute. (in_branch_delay): Return false if -mfix-ut699 is specified and fptype_ut699 is set to single. (truncdfsf2): Add fptype_ut699 attribute. (fix_truncdfsi2): Likewise. (floatsisf2): Change fptype attribute. (fix_truncsfsi2): Likewise. (negtf2_notv9): Delete. (negtf2_v9): Likewise. (negtf2_hq): New instruction. (negtf2): New instruction and splitter. (negdf2_notv9): Rewrite. (abstf2_notv9): Delete. (abstf2_hq_v9): Likewise. (abstf2_v9): Likewise. (abstf2_hq): New instruction. (abstf2): New instruction and splitter. (absdf2_notv9): Rewrite. 2014-05-14 Matthias Klose Revert: 2014-05-08 Manuel López-Ibáñez Matthias Klose PR driver/61106 * optc-gen.awk: Fix option handling for -Wunused-parameter. 2014-05-13 Peter Bergner * doc/sourcebuild.texi: (dfp_hw): Document. (p8vector_hw): Likewise. (powerpc_eabi_ok): Likewise. (powerpc_elfv2): Likewise. (powerpc_htm_ok): Likewise. (ppc_recip_hw): Likewise. (vsx_hw): Likewise. 2014-05-12 Senthil Kumar Selvaraj Backport from mainline 2014-05-12 Senthil Kumar Selvaraj PR target/60991 * config/avr/avr.c (avr_out_store_psi): Use correct constant to restore Y. 2014-05-09 Georg-Johann Lay Backport from 2014-05-09 trunk r210267 PR target/61055 * config/avr/avr.md (cc): Add new attribute set_vzn. (addqi3, addqq3, adduqq3, subqi3, subqq3, subuqq3, negqi2) [cc]: Set cc insn attribute to set_vzn instead of set_zn for alternatives with INC, DEC or NEG. * config/avr/avr.c (avr_notice_update_cc): Handle SET_VZN. (avr_out_plus_1): ADIW sets cc0 to CC_SET_CZN. INC, DEC and ADD+ADC set cc0 to CC_CLOBBER. 2014-05-09 Richard Sandiford * builtins.c (expand_builtin_setjmp_receiver): Emit a use of the hard frame pointer. Synchronize commentary with mainline. * cse.c (cse_insn): Only check for volatile asms. * cselib.c (cselib_process_insn): Likewise. * dse.c (scan_insn): Likewise. * stmt.c (expand_nl_goto_receiver): Emit a use and a clobber of the hard frame pointer. 2014-05-08 Manuel López-Ibáñez Matthias Klose PR driver/61106 * optc-gen.awk: Fix option handling for -Wunused-parameter. 2014-05-08 Uros Bizjak PR target/59952 * config/i386/i386.c (ix86_option_override_internal): Remove PTA_RTM from core-avx2. 2014-05-08 Charles Baylis Backport from mainline 2014-04-07 Charles Baylis PR target/60609 * config/arm/arm.h (ASM_OUTPUT_CASE_END): Remove. (LABEL_ALIGN_AFTER_BARRIER): Align barriers which occur after ADDR_DIFF_VEC. 2014-05-06 Kyrylo Tkachov * config.gcc (aarch64*-*-*): Use ISA flags from aarch64-arches.def. Do not define target_cpu_default2 to generic. 2014-05-06 Richard Biener Backport from mainline 2014-04-14 Richard Biener PR middle-end/55022 * fold-const.c (negate_expr_p): Don't negate directional rounding division. (fold_negate_expr): Likewise. 2014-05-06 Richard Biener Backport from mainline 2014-04-17 Richard Biener PR middle-end/60849 * tree-ssa-propagate.c (valid_gimple_rhs_p): Only allow effective boolean results for comparisons. 2014-04-07 Richard Biener PR tree-optimization/60766 * tree-ssa-loop-ivopts.c (cand_value_at): Compute in an unsigned type. (may_eliminate_iv): Convert cand_value_at result to desired type. 2014-04-23 Richard Biener PR tree-optimization/60903 * tree-ssa-loop-im.c (execute_sm_if_changed): Properly apply IRREDUCIBLE_LOOP loop flags to newly created BBs and edges. 2014-05-05 Richard Biener Backport from mainline 2014-04-23 Richard Biener PR middle-end/60895 * tree-inline.c (declare_return_variable): Use mark_addressable. 2014-04-07 Richard Biener PR middle-end/60750 * tree-ssa-operands.c (maybe_add_call_vops): Also add VDEFs for noreturn calls. * tree-cfgcleanup.c (fixup_noreturn_call): Do not remove VDEFs. 2014-04-14 Richard Biener PR tree-optimization/59817 PR tree-optimization/60453 * graphite-scop-detection.c (graphite_can_represent_scev): Complete recursion to catch all CHRECs in the scalar evolution and restrict the predicate for the remains appropriately. 2014-04-17 Richard Biener PR tree-optimization/60836 * tree-vect-loop.c (vect_create_epilog_for_reduction): Force initial PHI args to be gimple values. 2014-05-05 Jakub Jelinek Backported from mainline 2014-04-25 Jakub Jelinek PR tree-optimization/60960 * tree-vect-generic.c (expand_vector_operation): Only call expand_vector_divmod if type's mode satisfies VECTOR_MODE_P. 2014-05-04 Peter Bergner * config/rs6000/rs6000.h (RS6000_BTM_HARD_FLOAT): New define. (RS6000_BTM_COMMON): Add RS6000_BTM_HARD_FLOAT. (TARGET_EXTRA_BUILTINS): Add TARGET_HARD_FLOAT. * config/rs6000/rs6000-builtin.def (BU_MISC_1): Use RS6000_BTM_HARD_FLOAT. (BU_MISC_2): Likewise. * config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Handle RS6000_BTM_HARD_FLOAT. (rs6000_option_override_internal): Enforce -mhard-float if -mhard-dfp is explicitly used. (rs6000_invalid_builtin): Add hard floating builtin support. (rs6000_expand_builtin): Relax the gcc_assert to allow the new hard float builtins. (rs6000_builtin_mask_names): Add RS6000_BTM_HARD_FLOAT. 2014-05-03 Joey Ye Backport from mainline r209463 2014-04-17 Joey Ye * opts.c (OPT_fif_conversion, OPT_fif_conversion2): Disable for Og. 2014-05-03 Oleg Endo Back port from mainline PR target/61026 * config/sh/sh.c: Include stdlib headers before everything else. 2014-05-02 Bill Schmidt PR tree-optimization/60930 * gimple-ssa-strength-reduction.c (create_mul_imm_cand): Reject creating a multiply candidate by folding two constant multiplicands when the result overflows. 2014-05-02 Kyrylo Tkachov * config/aarch64/aarch64.h (TARGET_SIMD): Take AARCH64_ISA_SIMD into account. (TARGET_FLOAT): Take AARCH64_ISA_FP into account. 2014-04-30 Michael Meissner Back port from mainline 2014-04-24 Michael Meissner * doc/extend.texi (PowerPC Built-in Functions): Document new powerpc extended divide, bcd, pack/unpack 128-bit, builtin functions. (PowerPC AltiVec/VSX Built-in Functions): Likewise. * config/rs6000/predicates.md (const_0_to_3_operand): New predicate to match 0..3 integer constants. * config/rs6000/rs6000-builtin.def (BU_DFP_MISC_1): Add new macros to support adding miscellaneous builtin functions. (BU_DFP_MISC_2): Likewise. (BU_P7_MISC_1): Likewise. (BU_P7_MISC_2): Likewise. (BU_P8V_MISC_3): Likewise. (BU_MISC_1): Likewise. (BU_MISC_2): Likewise. (DIVWE): Add extended divide builtin functions. (DIVWEO): Likewise. (DIVWEU): Likewise. (DIVWEUO): Likewise. (DIVDE): Likewise. (DIVDEO): Likewise. (DIVDEU): Likewise. (DIVDEUO): Likewise. (DXEX): Add decimal floating-point builtin functions. (DXEXQ): Likewise. (DDEDPD): Likewise. (DDEDPDQ): Likewise. (DENBCD): Likewise. (DENBCDQ): Likewise. (DIEX): Likewise. (DIEXQ): Likewise. (DSCLI): Likewise. (DSCLIQ): Likewise. (DSCRI): Likewise. (DSCRIQ): Likewise. (CDTBCD): Add new BCD builtin functions. (CBCDTD): Likewise. (ADDG6S): Likewise. (BCDADD): Likewise. (BCDADD_LT): Likewise. (BCDADD_EQ): Likewise. (BCDADD_GT): Likewise. (BCDADD_OV): Likewise. (BCDSUB): Likewise. (BCDSUB_LT): Likewise. (BCDSUB_EQ): Likewise. (BCDSUB_GT): Likewise. (BCDSUB_OV): Likewise. (PACK_TD): Add new pack/unpack 128-bit type builtin functions. (UNPACK_TD): Likewise. (PACK_TF): Likewise. (UNPACK_TF): Likewise. (UNPACK_TF_0): Likewise. (UNPACK_TF_1): Likewise. (PACK_V1TI): Likewise. (UNPACK_V1TI): Likewise. * config/rs6000/rs6000.c (rs6000_builtin_mask_calculate): Add support for decimal floating point builtin functions. (rs6000_expand_ternop_builtin): Add checks for the new builtin functions that take constant arguments. (rs6000_invalid_builtin): Add decimal floating point builtin support. (rs6000_init_builtins): Setup long double, _Decimal64, and _Decimal128 types for new builtin functions. (builtin_function_type): Set the unsigned flags appropriately for the new builtin functions. (rs6000_opt_masks): Add support for decimal floating point builtin functions. * config/rs6000/rs6000.h (RS6000_BTM_DFP): Add support for decimal floating point builtin functions. (RS6000_BTM_COMMON): Likewise. (RS6000_BTI_long_double): Likewise. (RS6000_BTI_dfloat64): Likewise. (RS6000_BTI_dfloat128): Likewise. (long_double_type_internal_node): Likewise. (dfloat64_type_internal_node): Likewise. (dfloat128_type_internal_node): Likewise. * config/rs6000/altivec.h (UNSPEC_BCDADD): Add support for ISA 2.07 bcd arithmetic instructions. (UNSPEC_BCDSUB): Likewise. (UNSPEC_BCD_OVERFLOW): Likewise. (UNSPEC_BCD_ADD_SUB): Likewise. (bcd_add_sub): Likewise. (BCD_TEST): Likewise. (bcd): Likewise. (bcd_test): Likewise. (bcd_test2): Likewise. (bcd_): Likewise. (peephole2 for combined bcd ops): Likewise. * config/rs6000/dfp.md (UNSPEC_DDEDPD): Add support for new decimal floating point builtin functions. (UNSPEC_DENBCD): Likewise. (UNSPEC_DXEX): Likewise. (UNSPEC_DIEX): Likewise. (UNSPEC_DSCLI): Likewise. (UNSPEC_DSCRI): Likewise. (D64_D128): Likewise. (dfp_suffix): Likewise. (dfp_ddedpd_): Likewise. (dfp_denbcd_): Likewise. (dfp_dxex_): Likewise. (dfp_diex_): Likewise. (dfp_dscli_): Likewise. (dfp_dscri_): Likewise. * config/rs6000/rs6000.md (UNSPEC_ADDG6S): Add support for new BCD builtin functions. (UNSPEC_CDTBCD): Likewise. (UNSPEC_CBCDTD): Likewise. (UNSPEC_DIVE): Add support for new extended divide builtin functions. (UNSPEC_DIVEO): Likewise. (UNSPEC_DIVEU): Likewise. (UNSPEC_DIVEUO): Likewise. (UNSPEC_UNPACK_128BIT): Add support for new builtin functions to pack/unpack 128-bit types. (UNSPEC_PACK_128BIT): Likewise. (idiv_ldiv): New mode attribute to set the 32/64-bit divide type. (udiv3): Use idiv_ldiv mode attribute. (div3): Likewise. (addg6s): Add new BCD builtin functions. (cdtbcd): Likewise. (cbcdtd): Likewise. (UNSPEC_DIV_EXTEND): Add support for new extended divide instructions. (div_extend): Likewise. (div_"): Likewise. (FP128_64): Add support for new builtin functions to pack/unpack 128-bit types. (unpack): Likewise. (unpacktf_0): Likewise. (unpacktf_1): Likewise. (unpack_dm): Likewise. (unpack_nodm): Likewise. (pack): Likewise. (unpackv1ti): Likewise. (packv1ti): Likewise. 2014-04-29 Pat Haugen Backport from mainline 2014-04-17 Pat Haugen * config/rs6000/rs6000.md (addti3, subti3): New. 2014-04-28 Pat Haugen Backport from mainline 2014-04-28 Pat Haugen * config/rs6000/sync.md (AINT mode_iterator): Move definition. (loadsync_): Change mode. (load_quadpti, store_quadpti): New. (atomic_load, atomic_store): Add support for TI mode. * config/rs6000/rs6000.md (unspec enum): Add UNSPEC_LSQ. 2014-04-28 Eric Botcazou * configure.ac: Tweak GAS check for LEON instructions on SPARC. * configure: Regenerate. * config/sparc/sparc.opt (muser-mode): New option. * config/sparc/sync.md (atomic_compare_and_swap_1): Do not enable for LEON3. (atomic_compare_and_swap_leon3_1): New instruction for LEON3. * doc/invoke.texi (SPARC options): Document -muser-mode. 2014-04-25 Eric Botcazou PR target/60941 * config/sparc/sparc.md (ashlsi3_extend): Delete. 2014-04-22 Michael Meissner Back port from main line: 2014-03-27 Michael Meissner * config/rs6000/rs6000-builtins.def (VBPERMQ): Add vbpermq builtin for ISA 2.07. * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add vbpermq builtins. * config/rs6000/altivec.md (UNSPEC_VBPERMQ): Add support for the vbpermq instruction. (altivec_vbpermq): Likewise. PR target/60672 * config/rs6000/altivec.h (vec_xxsldwi): Add missing define to enable use of xxsldwi and xxpermdi builtin functions. (vec_xxpermdi): Likewise. * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Document use of vec_xxsldwi and vec_xxpermdi builtins. 2014-04-23 Uros Bizjak Backport from mainline 2014-04-21 Uros Bizjak PR target/60909 * config/i386/i386.c (ix86_expand_builtin) : Use temporary register for target RTX. : Ditto. 2014-04-23 Richard Biener Backport from mainline 2014-04-02 Richard Biener PR middle-end/60729 * optabs.c (expand_abs_nojump): Honor flag_trapv only for MODE_INTs. Properly use negv_optab. (expand_abs): Likewise. 2014-04-03 Richard Biener PR tree-optimization/60740 * graphite-scop-detection.c (stmt_simple_for_scop_p): Iterate over all GIMPLE_COND operands. 2014-04-23 Richard Biener PR middle-end/60635 * gimplify.c (gimple_regimplify_operands): Update the re-gimplifed stmt. 2014-04-21 Michael Meissner Back port from the trunk, subversion id 209546. 2014-04-21 Michael Meissner PR target/60735 * config/rs6000/rs6000.md (mov_softfloat32, FMOVE64 case): If mode is DDmode and TARGET_E500_DOUBLE allow move. * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print some more debug information for E500 if -mdebug=reg. 2014-04-18 Richard Henderson * config/aarch64/aarch64.c (aarch64_register_move_cost): Pass a mode to GET_MODE_SIZE, not a reg_class_t. 2014-04-17 Bill Schmidt * config/rs6000/vsx.md (vsx_xxmrghw_): Adjust for little-endian. (vsx_xxmrglw_): Likewise. 2014-04-15 Bill Schmidt PR target/60839 Revert the following patch 2014-04-04 Bill Schmidt Back port mainline subversion id 209025. 2014-04-02 Michael Meissner PR target/60735 * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): If we have software floating point or no floating point registers, do not allow any type in the FPRs. Eliminate a test for SPE SIMD types in GPRs that occurs after we tested for GPRs that would never be true. * config/rs6000/rs6000.md (mov_softfloat32, FMOVE64): Rewrite tests to use TARGET_DOUBLE_FLOAT and TARGET_E500_DOUBLE, since the FMOVE64 type is DFmode/DDmode. If TARGET_E500_DOUBLE, specifically allow DDmode, since that does not use the SPE SIMD instructions. 2014-04-10 Vladimir Makarov PR rtl-optimization/60769 * lra-constraints.c (simplify_operand_subreg): Force reload of paradoxical subreg if it is not in the class contents. 2014-04-10 Jakub Jelinek Backport from mainline 2014-03-12 Jakub Jelinek Marc Glisse PR tree-optimization/60502 * tree-ssa-reassoc.c (eliminate_not_pairs): Use build_all_ones_cst instead of build_low_bits_mask. 2013-06-13 Marc Glisse * tree.c (build_all_ones_cst): New function. * tree.h (build_all_ones_cst): Declare it. 2013-05-10 Marc Glisse * tree.c (build_minus_one_cst): New function. * tree.h (build_minus_one_cst): Declare new function. 2014-04-10 Jakub Jelinek Backport from mainline 2014-03-28 Jakub Jelinek PR target/60693 * config/i386/i386.c (ix86_copy_addr_to_reg): Call copy_addr_to_reg also if addr has VOIDmode. 2014-03-17 Jakub Jelinek PR target/60516 * config/i386/i386.c (ix86_expand_epilogue): Adjust REG_CFA_ADJUST_CFA note creation for the 2010-08-31 changes. 2014-03-06 Jakub Jelinek Meador Inge PR target/58595 * config/arm/arm.c (arm_tls_symbol_p): Remove. (arm_legitimize_address): Call legitimize_tls_address for any arm_tls_referenced_p expression, handle constant addend. Call it before testing for !TARGET_ARM. (thumb_legitimize_address): Don't handle arm_tls_symbol_p here. 2014-04-09 Bill Schmidt Backport from mainline r208750 2014-03-21 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vector_set): Generate a pattern for vector nor instead of subtract from splat(-1). (altivec_expand_vec_perm_const_le): Likewise. Backport from mainline r209235 2014-04-08 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vector_set): Use vnand instead of vnor to exploit possible fusion opportunity in the future. (altivec_expand_vec_perm_const_le): Likewise. 2014-04-09 Bill Schmidt Revert following patch 2014-04-08 Pat Haugen Backport from mainline 2014-04-08 Pat Haugen * config/rs6000/sync.md (AINT mode_iterator): Move definition. (loadsync_): Change mode. (load_quadpti, store_quadpti): New. (atomic_load, atomic_store): Add support for TI mode. * config/rs6000/rs6000.md (unspec enum): Add UNSPEC_LSQ. 2014-04-09 Bill Schmidt Backport from mainline r202642 2013-09-17 Alan Modra PR target/57589 * config/rs6000/driver-rs6000.c (elf_platform): Revert 2013-06-11 patch (r199972). 2014-04-08 Pat Haugen Backport from mainline 2014-04-08 Pat Haugen * config/rs6000/sync.md (AINT mode_iterator): Move definition. (loadsync_): Change mode. (load_quadpti, store_quadpti): New. (atomic_load, atomic_store): Add support for TI mode. * config/rs6000/rs6000.md (unspec enum): Add UNSPEC_LSQ. 2014-04-07 Martin Jambor PR ipa/60640 * ipa-cp.c (propagate_constants_accross_call): Do not propagate accross thunks. 2014-04-07 Dominique d'Humieres Backport from mainline 2013-09-14 Iain Sandoe PR target/48094 * config/darwin.c (darwin_objc2_section): Note if ObjC Metadata is seen. (darwin_objc1_section): Likewise. (darwin_file_end): Emit Image Info section when required. 2014-04-05 Alan Modra Apply from mainline 2014-01-28 Alan Modra * Makefile.in (BUILD_CPPFLAGS): Do not use ALL_CPPFLAGS. * configure.ac : Define GENERATOR_FILE. Comment. Use CXX_FOR_BUILD, CXXFLAGS_FOR_BUILD and LD_FOR_BUILD too. * configure: Regenerate. 2014-04-04 Ulrich Weigand Backport from mainline r208895: 2014-03-28 Ulrich Weigand * config/rs6000/rs6000.c (fusion_gpr_load_p): Refuse optimization if it would clobber the stack pointer, even temporarily. 2014-04-04 Bill Schmidt Back port from main line: 2014-04-01 Michael Meissner * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Document vec_vgbbd. 2014-04-04 Bill Schmidt Back port mainline subversion id 209025. 2014-04-02 Michael Meissner PR target/60735 * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): If we have software floating point or no floating point registers, do not allow any type in the FPRs. Eliminate a test for SPE SIMD types in GPRs that occurs after we tested for GPRs that would never be true. * config/rs6000/rs6000.md (mov_softfloat32, FMOVE64): Rewrite tests to use TARGET_DOUBLE_FLOAT and TARGET_E500_DOUBLE, since the FMOVE64 type is DFmode/DDmode. If TARGET_E500_DOUBLE, specifically allow DDmode, since that does not use the SPE SIMD instructions. 2014-04-04 Bill Schmidt Backport from mainline r205308 2013-11-23 David Edelsohn * config/rs6000/rs6000.c (IN_NAMED_SECTION): New macro. (rs6000_xcoff_select_section): Place decls with stricter alignment into named sections. (rs6000_xcoff_unique_section): Allow unique sections for uninitialized data with strict alignment. 2014-04-04 Bill Schmidt Backport from mainline 2013-11-15 Ulrich Weigand * gcc/configure: Regenerate. 2014-04-04 Bill Schmidt Back port from trunk 2013-04-25 Alan Modra PR target/57052 * config/rs6000/rs6000.md (rotlsi3_internal7): Rename to rotlsi3_internal7le and condition on !BYTES_BIG_ENDIAN. (rotlsi3_internal8be): New BYTES_BIG_ENDIAN insn. Repeat for many other rotate/shift and mask patterns using subregs. Name lshiftrt insns. (ashrdisi3_noppc64): Rename to ashrdisi3_noppc64be and condition on WORDS_BIG_ENDIAN. 2013-06-07 Alan Modra * config/rs6000/rs6000.c (rs6000_option_override_internal): Don't override user -mfp-in-toc. (offsettable_ok_by_alignment): Consider just the current access rather than the whole object, unless BLKmode. Handle CONSTANT_POOL_ADDRESS_P constants that lack a decl too. (use_toc_relative_ref): Allow CONSTANT_POOL_ADDRESS_P constants for -mcmodel=medium. * config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Don't override user -mfp-in-toc or -msum-in-toc. Default to -mno-fp-in-toc for -mcmodel=medium. 2013-06-18 Alan Modra * config/rs6000/rs6000.h (enum data_align): New. (LOCAL_ALIGNMENT, DATA_ALIGNMENT): Use rs6000_data_alignment. (DATA_ABI_ALIGNMENT): Define. (CONSTANT_ALIGNMENT): Correct comment. * config/rs6000/rs6000-protos.h (rs6000_data_alignment): Declare. * config/rs6000/rs6000.c (rs6000_data_alignment): New function. 2013-07-11 Ulrich Weigand * config/rs6000/rs6000.md (""*tls_gd_low"): Require GOT register as additional operand in UNSPEC. ("*tls_ld_low"): Likewise. ("*tls_got_dtprel_low"): Likewise. ("*tls_got_tprel_low"): Likewise. ("*tls_gd"): Update splitter. ("*tls_ld"): Likewise. ("tls_got_dtprel_"): Likewise. ("tls_got_tprel_"): Likewise. 2014-01-23 Pat Haugen * config/rs6000/rs6000.c (rs6000_option_override_internal): Don't force flag_ira_loop_pressure if set via command line. 2014-02-06 Alan Modra PR target/60032 * config/rs6000/rs6000.c (rs6000_secondary_memory_needed_mode): Only change SDmode to DDmode when lra_in_progress. 2014-04-04 Bill Schmidt V1TImode Support Back port from trunk 2014-03-12 Michael Meissner * config/rs6000/vector.md (VEC_L): Add V1TI mode to vector types. (VEC_M): Likewise. (VEC_N): Likewise. (VEC_R): Likewise. (VEC_base): Likewise. (mov, VEC_M modes): If we are loading TImode into VSX registers, we need to swap double words in little endian mode. * config/rs6000/rs6000-modes.def (V1TImode): Add new vector mode to be a container mode for 128-bit integer operations added in ISA 2.07. Unlike TImode and PTImode, the preferred register set is the Altivec/VMX registers for the 128-bit operations. * config/rs6000/rs6000-protos.h (rs6000_move_128bit_ok_p): Add declarations. (rs6000_split_128bit_ok_p): Likewise. * config/rs6000/rs6000-builtin.def (BU_P8V_AV_3): Add new support macros for creating ISA 2.07 normal and overloaded builtin functions with 3 arguments. (BU_P8V_OVERLOAD_3): Likewise. (VPERM_1T): Add support for V1TImode in 128-bit vector operations for use as overloaded functions. (VPERM_1TI_UNS): Likewise. (VSEL_1TI): Likewise. (VSEL_1TI_UNS): Likewise. (ST_INTERNAL_1ti): Likewise. (LD_INTERNAL_1ti): Likewise. (XXSEL_1TI): Likewise. (XXSEL_1TI_UNS): Likewise. (VPERM_1TI): Likewise. (VPERM_1TI_UNS): Likewise. (XXPERMDI_1TI): Likewise. (SET_1TI): Likewise. (LXVD2X_V1TI): Likewise. (STXVD2X_V1TI): Likewise. (VEC_INIT_V1TI): Likewise. (VEC_SET_V1TI): Likewise. (VEC_EXT_V1TI): Likewise. (EQV_V1TI): Likewise. (NAND_V1TI): Likewise. (ORC_V1TI): Likewise. (VADDCUQ): Add support for 128-bit integer arithmetic instructions added in ISA 2.07. Add both normal 'altivec' builtins, and the overloaded builtin. (VADDUQM): Likewise. (VSUBCUQ): Likewise. (VADDEUQM): Likewise. (VADDECUQ): Likewise. (VSUBEUQM): Likewise. (VSUBECUQ): Likewise. * config/rs6000/rs6000-c.c (__int128_type): New static to hold __int128_t and __uint128_t types. (__uint128_type): Likewise. (altivec_categorize_keyword): Add support for vector __int128_t, vector __uint128_t, vector __int128, and vector unsigned __int128 as a container type for TImode operations that need to be done in VSX/Altivec registers. (rs6000_macro_to_expand): Likewise. (altivec_overloaded_builtins): Add ISA 2.07 overloaded functions to support 128-bit integer instructions vaddcuq, vadduqm, vaddecuq, vaddeuqm, vsubcuq, vsubuqm, vsubecuq, vsubeuqm. (altivec_resolve_overloaded_builtin): Add support for V1TImode. * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): Add support for V1TImode, and set up preferences to use VSX/Altivec registers. Setup VSX reload handlers. (rs6000_debug_reg_global): Likewise. (rs6000_init_hard_regno_mode_ok): Likewise. (rs6000_preferred_simd_mode): Likewise. (vspltis_constant): Do not allow V1TImode as easy altivec constants. (easy_altivec_constant): Likewise. (output_vec_const_move): Likewise. (rs6000_expand_vector_set): Convert V1TImode set and extract to simple move. (rs6000_expand_vector_extract): Likewise. (reg_offset_addressing_ok_p): Setup V1TImode to use VSX reg+reg addressing. (rs6000_const_vec): Add support for V1TImode. (rs6000_emit_le_vsx_load): Swap double words when loading or storing TImode/V1TImode. (rs6000_emit_le_vsx_store): Likewise. (rs6000_emit_le_vsx_move): Likewise. (rs6000_emit_move): Add support for V1TImode. (altivec_expand_ld_builtin): Likewise. (altivec_expand_st_builtin): Likewise. (altivec_expand_vec_init_builtin): Likewise. (altivec_expand_builtin): Likewise. (rs6000_init_builtins): Add support for V1TImode type. Add support for ISA 2.07 128-bit integer builtins. Define type names for the VSX/Altivec vector types. (altivec_init_builtins): Add support for overloaded vector functions with V1TImode type. (rs6000_preferred_reload_class): Prefer Altivec registers for V1TImode. (rs6000_move_128bit_ok_p): Move 128-bit move/split validation to external function. (rs6000_split_128bit_ok_p): Likewise. (rs6000_handle_altivec_attribute): Create V1TImode from vector __int128_t and vector __uint128_t. * config/rs6000/vsx.md (VSX_L): Add V1TImode to vector iterators and mode attributes. (VSX_M): Likewise. (VSX_M2): Likewise. (VSm): Likewise. (VSs): Likewise. (VSr): Likewise. (VSv): Likewise. (VS_scalar): Likewise. (VS_double): Likewise. (vsx_set_v1ti): New builtin function to create V1TImode from TImode. * config/rs6000/rs6000.h (TARGET_VADDUQM): New macro to say whether we support the ISA 2.07 128-bit integer arithmetic instructions. (ALTIVEC_OR_VSX_VECTOR_MODE): Add V1TImode. (enum rs6000_builtin_type_index): Add fields to hold V1TImode and TImode types for use with the builtin functions. (V1TI_type_node): Likewise. (unsigned_V1TI_type_node): Likewise. (intTI_type_internal_node): Likewise. (uintTI_type_internal_node): Likewise. * config/rs6000/altivec.md (UNSPEC_VADDCUQ): New unspecs for ISA 2.07 128-bit builtin functions. (UNSPEC_VADDEUQM): Likewise. (UNSPEC_VADDECUQ): Likewise. (UNSPEC_VSUBCUQ): Likewise. (UNSPEC_VSUBEUQM): Likewise. (UNSPEC_VSUBECUQ): Likewise. (VM): Add V1TImode to vector mode iterators. (VM2): Likewise. (VI_unit): Likewise. (altivec_vadduqm): Add ISA 2.07 128-bit binary builtins. (altivec_vaddcuq): Likewise. (altivec_vsubuqm): Likewise. (altivec_vsubcuq): Likewise. (altivec_vaddeuqm): Likewise. (altivec_vaddecuq): Likewise. (altivec_vsubeuqm): Likewise. (altivec_vsubecuq): Likewise. * config/rs6000/rs6000.md (FMOVE128_GPR): Add V1TImode to vector mode iterators. (BOOL_128): Likewise. (BOOL_REGS_OUTPUT): Likewise. (BOOL_REGS_OP1): Likewise. (BOOL_REGS_OP2): Likewise. (BOOL_REGS_UNARY): Likewise. (BOOL_REGS_AND_CR0): Likewise. * config/rs6000/altivec.h (vec_vaddcuq): Add support for ISA 2.07 128-bit integer builtin support. (vec_vadduqm): Likewise. (vec_vaddecuq): Likewise. (vec_vaddeuqm): Likewise. (vec_vsubecuq): Likewise. (vec_vsubeuqm): Likewise. (vec_vsubcuq): Likewise. (vec_vsubuqm): Likewise. * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Document vec_vaddcuq, vec_vadduqm, vec_vaddecuq, vec_vaddeuqm, vec_subecuq, vec_subeuqm, vec_vsubcuq, vec_vsubeqm builtins adding 128-bit integer add/subtract to ISA 2.07. 2014-04-04 Bill Schmidt Apply mainline r207798 2014-02-26 Alan Modra PR target/58675 PR target/57935 * config/rs6000/rs6000.c (rs6000_secondary_reload_inner): Use find_replacement on parts of insn rtl that might be reloaded. Backport from mainline r208287 2014-03-03 Bill Schmidt * config/rs6000/rs6000.c (rs6000_preferred_reload_class): Disallow reload of PLUS rtx's outside of GENERAL_REGS or BASE_REGS; relax constraint on constants to permit them being loaded into GENERAL_REGS or BASE_REGS. 2014-04-04 Bill Schmidt Backport from mainline r207699. 2014-02-11 Michael Meissner PR target/60137 * config/rs6000/rs6000.md (128-bit GPR splitter): Add a splitter for VSX/Altivec vectors that land in GPR registers. Backport from mainline r207808. 2014-02-15 Michael Meissner PR target/60203 * config/rs6000/rs6000.md (rreg): Add TFmode, TDmode constraints. (mov_internal, TFmode/TDmode): Split TFmode/TDmode moves into 64-bit and 32-bit moves. On 64-bit moves, add support for using direct move instructions on ISA 2.07. Also adjust instruction length for 64-bit. (mov_64bit, TFmode/TDmode): Likewise. (mov_32bit, TFmode/TDmode): Likewise. Backport from mainline r207868. 2014-02-18 Michael Meissner PR target/60203 * config/rs6000/rs6000.md (mov_64bit, TF/TDmode moves): Split 64-bit moves into 2 patterns. Do not allow the use of direct move for TDmode in little endian, since the decimal value has little endian bytes within a word, but the 64-bit pieces are ordered in a big endian fashion, and normal subreg's of TDmode are not allowed. (mov_64bit_dm): Likewise. (movtd_64bit_nodm): Likewise. 2014-04-04 Bill Schmidt Backport from mainline r207658 2014-02-06 Ulrich Weigand * config/rs6000/sysv4.h (ENDIAN_SELECT): Do not attempt to enforce big-endian mode for -mcall-aixdesc, -mcall-freebsd, -mcall-netbsd, -mcall-openbsd, or -mcall-linux. (CC1_ENDIAN_BIG_SPEC): Remove. (CC1_ENDIAN_LITTLE_SPEC): Remove. (CC1_ENDIAN_DEFAULT_SPEC): Remove. (CC1_SPEC): Remove (always empty) %cc1_endian_... spec. (SUBTARGET_EXTRA_SPECS): Remove %cc1_endian_big, %cc1_endian_little, and %cc1_endian_default. * config/rs6000/sysv4le.h (CC1_ENDIAN_DEFAULT_SPEC): Remove. 2014-04-04 Bill Schmidt Little Endian Vector API Support Backport from mainline r206443 2014-01-08 Bill Schmidt * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Remove two duplicate entries. Backport from mainline r206494 2014-01-09 Bill Schmidt * doc/invoke.texi: Add -maltivec={be,le} options, and document default element-order behavior for -maltivec. * config/rs6000/rs6000.opt: Add -maltivec={be,le} options. * config/rs6000/rs6000.c (rs6000_option_override_internal): Ensure that -maltivec={le,be} implies -maltivec; disallow -maltivec=le when targeting big endian, at least for now. * config/rs6000/rs6000.h: Add #define of VECTOR_ELT_ORDER_BIG. Backport from mainline r206541 2014-01-10 Bill Schmidt * config/rs6000/rs6000-builtin.def: Fix pasto for VPKSDUS. Backport from mainline r206590 2014-01-13 Bill Schmidt * config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Implement -maltivec=be for vec_insert and vec_extract. Backport from mainline r206641 2014-01-15 Bill Schmidt * config/rs6000/altivec.md (mulv8hi3): Explicitly generate vmulesh and vmulosh rather than call gen_vec_widen_smult_*. (vec_widen_umult_even_v16qi): Test VECTOR_ELT_ORDER_BIG rather than BYTES_BIG_ENDIAN to determine use of even or odd instruction. (vec_widen_smult_even_v16qi): Likewise. (vec_widen_umult_even_v8hi): Likewise. (vec_widen_smult_even_v8hi): Likewise. (vec_widen_umult_odd_v16qi): Likewise. (vec_widen_smult_odd_v16qi): Likewise. (vec_widen_umult_odd_v8hi): Likewise. (vec_widen_smult_odd_v8hi): Likewise. (vec_widen_umult_hi_v16qi): Explicitly generate vmuleub and vmuloub rather than call gen_vec_widen_umult_*. (vec_widen_umult_lo_v16qi): Likewise. (vec_widen_smult_hi_v16qi): Explicitly generate vmulesb and vmulosb rather than call gen_vec_widen_smult_*. (vec_widen_smult_lo_v16qi): Likewise. (vec_widen_umult_hi_v8hi): Explicitly generate vmuleuh and vmulouh rather than call gen_vec_widen_umult_*. (vec_widen_umult_lo_v8hi): Likewise. (vec_widen_smult_hi_v8hi): Explicitly gnerate vmulesh and vmulosh rather than call gen_vec_widen_smult_*. (vec_widen_smult_lo_v8hi): Likewise. Backport from mainline r207062 2014-01-24 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vec_perm_const_1): Remove correction for little endian... * config/rs6000/vsx.md (vsx_xxpermdi2__1): ...and move it to here. Backport from mainline r207262 2014-01-29 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Use CODE_FOR_altivec_vmrg*_direct rather than CODE_FOR_altivec_vmrg*. * config/rs6000/vsx.md (vsx_mergel_): Adjust for -maltivec=be with LE targets. (vsx_mergeh_): Likewise. * config/rs6000/altivec.md (UNSPEC_VMRG[HL]_DIRECT): New unspecs. (mulv8hi3): Use gen_altivec_vmrg[hl]w_direct. (altivec_vmrghb): Replace with define_expand and new *altivec_vmrghb_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrghb_direct): New define_insn. (altivec_vmrghh): Replace with define_expand and new *altivec_vmrghh_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrghh_direct): New define_insn. (altivec_vmrghw): Replace with define_expand and new *altivec_vmrghw_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrghw_direct): New define_insn. (*altivec_vmrghsf): Adjust for endianness. (altivec_vmrglb): Replace with define_expand and new *altivec_vmrglb_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrglb_direct): New define_insn. (altivec_vmrglh): Replace with define_expand and new *altivec_vmrglh_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrglh_direct): New define_insn. (altivec_vmrglw): Replace with define_expand and new *altivec_vmrglw_internal insn; adjust for -maltivec=be with LE targets. (altivec_vmrglw_direct): New define_insn. (*altivec_vmrglsf): Adjust for endianness. (vec_widen_umult_hi_v16qi): Use gen_altivec_vmrghh_direct. (vec_widen_umult_lo_v16qi): Use gen_altivec_vmrglh_direct. (vec_widen_smult_hi_v16qi): Use gen_altivec_vmrghh_direct. (vec_widen_smult_lo_v16qi): Use gen_altivec_vmrglh_direct. (vec_widen_umult_hi_v8hi): Use gen_altivec_vmrghw_direct. (vec_widen_umult_lo_v8hi): Use gen_altivec_vmrglw_direct. (vec_widen_smult_hi_v8hi): Use gen_altivec_vmrghw_direct. (vec_widen_smult_lo_v8hi): Use gen_altivec_vmrglw_direct. Backport from mainline r207318 2014-01-30 Bill Schmidt * gcc/config/rs6000/rs6000.c (rs6000_expand_vector_init): Use gen_vsx_xxspltw_v4sf_direct instead of gen_vsx_xxspltw_v4sf; remove element index adjustment for endian (now handled in vsx.md and altivec.md). (altivec_expand_vec_perm_const): Use gen_altivec_vsplt[bhw]_direct instead of gen_altivec_vsplt[bhw]. * gcc/config/rs6000/vsx.md (UNSPEC_VSX_XXSPLTW): New unspec. (vsx_xxspltw_): Adjust element index for little endian. * gcc/config/rs6000/altivec.md (altivec_vspltb): Divide into a define_expand and a new define_insn *altivec_vspltb_internal; adjust for -maltivec=be on a little endian target. (altivec_vspltb_direct): New. (altivec_vsplth): Divide into a define_expand and a new define_insn *altivec_vsplth_internal; adjust for -maltivec=be on a little endian target. (altivec_vsplth_direct): New. (altivec_vspltw): Divide into a define_expand and a new define_insn *altivec_vspltw_internal; adjust for -maltivec=be on a little endian target. (altivec_vspltw_direct): New. (altivec_vspltsf): Divide into a define_expand and a new define_insn *altivec_vspltsf_internal; adjust for -maltivec=be on a little endian target. Backport from mainline r207326 2014-01-30 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vector_init): Remove unused variable "field". * config/rs6000/vsx.md (vsx_mergel_): Add missing DONE. (vsx_mergeh_): Likewise. * config/rs6000/altivec.md (altivec_vmrghb): Likewise. (altivec_vmrghh): Likewise. (altivec_vmrghw): Likewise. (altivec_vmrglb): Likewise. (altivec_vmrglh): Likewise. (altivec_vmrglw): Likewise. (altivec_vspltb): Add missing uses. (altivec_vsplth): Likewise. (altivec_vspltw): Likewise. (altivec_vspltsf): Likewise. Backport from mainline r207414 2014-02-02 Bill Schmidt * config/rs6000/altivec.md (UNSPEC_VSUMSWS_DIRECT): New unspec. (altivec_vsumsws): Add handling for -maltivec=be with a little endian target. (altivec_vsumsws_direct): New. (reduc_splus_): Call gen_altivec_vsumsws_direct instead of gen_altivec_vsumsws. Backport from mainline r207415 2014-02-02 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_le): Generalize for vector types other than V16QImode. * config/rs6000/altivec.md (altivec_vperm_): Change to a define_expand, and call altivec_expand_vec_perm_le when producing code with little endian element order. (*altivec_vperm__internal): New insn having previous behavior of altivec_vperm_. (altivec_vperm__uns): Change to a define_expand, and call altivec_expand_vec_perm_le when producing code with little endian element order. (*altivec_vperm__uns_internal): New insn having previous behavior of altivec_vperm__uns. Backport from mainline r207520 2014-02-05 Bill Schmidt * altivec.md (UNSPEC_VPACK_UNS_UNS_MOD_DIRECT): New unspec. (UNSPEC_VUNPACK_HI_SIGN_DIRECT): Likewise. (UNSPEC_VUNPACK_LO_SIGN_DIRECT): Likewise. (mulv8hi3): Use gen_altivec_vpkuwum_direct instead of gen_altivec_vpkuwum. (altivec_vpkpx): Test for VECTOR_ELT_ORDER_BIG instead of for BYTES_BIG_ENDIAN. (altivec_vpksss): Likewise. (altivec_vpksus): Likewise. (altivec_vpkuus): Likewise. (altivec_vpkuum): Likewise. (altivec_vpkuum_direct): New (copy of altivec_vpkuum that still relies on BYTES_BIG_ENDIAN, for internal use). (altivec_vupkhs): Emit vupkls* instead of vupkhs* when target is little endian and -maltivec=be is not specified. (*altivec_vupkhs_direct): New (copy of altivec_vupkhs that always emits vupkhs*, for internal use). (altivec_vupkls): Emit vupkhs* instead of vupkls* when target is little endian and -maltivec=be is not specified. (*altivec_vupkls_direct): New (copy of altivec_vupkls that always emits vupkls*, for internal use). (altivec_vupkhpx): Emit vupklpx instead of vupkhpx when target is little endian and -maltivec=be is not specified. (altivec_vupklpx): Emit vupkhpx instead of vupklpx when target is little endian and -maltivec=be is not specified. Backport from mainline r207521 2014-02-05 Bill Schmidt * config/rs6000/altivec.md (altivec_vsum2sws): Adjust code generation for -maltivec=be. (altivec_vsumsws): Simplify redundant test. Backport from mainline r207525 2014-02-05 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Change CODE_FOR_altivec_vpku[hw]um to CODE_FOR_altivec_vpku[hw]um_direct. * config/rs6000/altivec.md (vec_unpacks_hi_): Change UNSPEC_VUNPACK_HI_SIGN to UNSPEC_VUNPACK_HI_SIGN_DIRECT. (vec_unpacks_lo_): Change UNSPEC_VUNPACK_LO_SIGN to UNSPEC_VUNPACK_LO_SIGN_DIRECT. Backport from mainline r207814. 2014-02-16 Bill Schmidt * config/rs6000/vsx.md (vsx_xxpermdi_): Handle little endian targets. Backport from mainline r207815. 2014-02-16 Bill Schmidt * config/rs6000/altivec.md (p8_vmrgew): Handle little endian targets. (p8_vmrgow): Likewise. Backport from mainline r207919. 2014-02-19 Bill Schmidt * config/rs6000/rs6000.c (vspltis_constant): Fix most significant bit of zero. Backport from mainline 208019 2014-02-21 Bill Schmidt * config/rs6000/altivec.md (altivec_lvxl): Rename as *altivec_lvxl__internal and use VM2 iterator instead of V4SI. (altivec_lvxl_): New define_expand incorporating -maltivec=be semantics where needed. (altivec_lvx): Rename as *altivec_lvx__internal. (altivec_lvx_): New define_expand incorporating -maltivec=be semantics where needed. (altivec_stvx): Rename as *altivec_stvx__internal. (altivec_stvx_): New define_expand incorporating -maltivec=be semantics where needed. (altivec_stvxl): Rename as *altivec_stvxl__internal and use VM2 iterator instead of V4SI. (altivec_stvxl_): New define_expand incorporating -maltivec=be semantics where needed. * config/rs6000/rs6000-builtin.def: Add new built-in definitions LVXL_V2DF, LVXL_V2DI, LVXL_V4SF, LVXL_V4SI, LVXL_V8HI, LVXL_V16QI, LVX_V2DF, LVX_V2DI, LVX_V4SF, LVX_V4SI, LVX_V8HI, LVX_V16QI, STVX_V2DF, STVX_V2DI, STVX_V4SF, STVX_V4SI, STVX_V8HI, STVX_V16QI, STVXL_V2DF, STVXL_V2DI, STVXL_V4SF, STVXL_V4SI, STVXL_V8HI, STVXL_V16QI. * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Replace ALTIVEC_BUILTIN_LVX with ALTIVEC_BUILTIN_LVX_ throughout; similarly for ALTIVEC_BUILTIN_LVXL, ALTIVEC_BUILTIN_STVX, and ALTIVEC_BUILTIN_STVXL. * config/rs6000/rs6000-protos.h (altivec_expand_lvx_be): New prototype. (altivec_expand_stvx_be): Likewise. * config/rs6000/rs6000.c (swap_selector_for_mode): New function. (altivec_expand_lvx_be): Likewise. (altivec_expand_stvx_be): Likewise. (altivec_expand_builtin): Add cases for ALTIVEC_BUILTIN_STVX_, ALTIVEC_BUILTIN_STVXL_, ALTIVEC_BUILTIN_LVXL_, and ALTIVEC_BUILTIN_LVX_. (altivec_init_builtins): Add definitions for __builtin_altivec_lvxl_, __builtin_altivec_lvx_, __builtin_altivec_stvx_, and __builtin_altivec_stvxl_. Backport from mainline 208021 2014-02-21 Bill Schmidt * config/rs6000/altivec.md (altivec_vsumsws): Replace second vspltw with vsldoi. (reduc_uplus_v16qi): Use gen_altivec_vsumsws_direct instead of gen_altivec_vsumsws. Backport from mainline 208049 2014-02-23 Bill Schmidt * config/rs6000/altivec.md (altivec_lvex): Replace define_insn with define_expand and new define_insn *altivec_lvex_internal. (altivec_stvex): Replace define_insn with define_expand and new define_insn *altivec_stvex_internal. * config/rs6000/rs6000-protos.h (altivec_expand_stvex_be): New prototype. * config/rs6000/rs6000.c (altivec_expand_lvx_be): Document use by lve*x built-ins. (altivec_expand_stvex_be): New function. Backport from mainline 2014-02-23 Bill Schmidt * config/rs6000/rs6000.c (rs6000_emit_le_vsx_move): Relax assert to permit subregs. Backport from mainline 2014-02-25 Bill Schmidt * config/rs6000/vector.md (*vector_unordered): Change split to use canonical form for nor3. 2014-04-04 Bill Schmidt Backport from mainline 2014-02-04 Michael Meissner * config/rs6000/rs6000.opt (-mlra): Add switch to enable the LRA register allocator. * config/rs6000/rs6000.c (TARGET_LRA_P): Add support for -mlra to enable the LRA register allocator. Back port the changes from the trunk to enable LRA. (rs6000_legitimate_offset_address_p): Likewise. (legitimate_lo_sum_address_p): Likewise. (use_toc_relative_ref): Likewise. (rs6000_legitimate_address_p): Likewise. (rs6000_emit_move): Likewise. (rs6000_secondary_memory_needed_mode): Likewise. (rs6000_alloc_sdmode_stack_slot): Likewise. (rs6000_lra_p): Likewise. * config/rs6000/sync.md (load_lockedti): Copy TI/PTI variables by 64-bit parts to force the register allocator to allocate even/odd register pairs for the quad word atomic instructions. (store_conditionalti): Likewise. 2014-04-04 Bill Schmidt Back port from mainline 2014-01-23 Michael Meissner PR target/59909 * doc/invoke.texi (RS/6000 and PowerPC Options): Document -mquad-memory-atomic. Update -mquad-memory documentation to say it is only used for non-atomic loads/stores. * config/rs6000/predicates.md (quad_int_reg_operand): Allow either -mquad-memory or -mquad-memory-atomic switches. * config/rs6000/rs6000-cpus.def (ISA_2_7_MASKS_SERVER): Add -mquad-memory-atomic to ISA 2.07 support. * config/rs6000/rs6000.opt (-mquad-memory-atomic): Add new switch to separate support of normal quad word memory operations (ldq, stq) from the atomic quad word memory operations. * config/rs6000/rs6000.c (rs6000_option_override_internal): Add support to separate non-atomic quad word operations from atomic quad word operations. Disable non-atomic quad word operations in little endian mode so that we don't have to swap words after the load and before the store. (quad_load_store_p): Add comment about atomic quad word support. (rs6000_opt_masks): Add -mquad-memory-atomic to the list of options printed with -mdebug=reg. * config/rs6000/rs6000.h (TARGET_SYNC_TI): Use -mquad-memory-atomic as the test for whether we have quad word atomic instructions. (TARGET_SYNC_HI_QI): If either -mquad-memory-atomic, -mquad-memory, or -mp8-vector are used, allow byte/half-word atomic operations. * config/rs6000/sync.md (load_lockedti): Insure that the address is a proper indexed or indirect address for the lqarx instruction. On little endian systems, swap the hi/lo registers after the lqarx instruction. (load_lockedpti): Use indexed_or_indirect_operand predicate to insure the address is valid for the lqarx instruction. (store_conditionalti): Insure that the address is a proper indexed or indirect address for the stqcrx. instruction. On little endian systems, swap the hi/lo registers before doing the stqcrx. instruction. (store_conditionalpti): Use indexed_or_indirect_operand predicate to insure the address is valid for the stqcrx. instruction. * gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define __QUAD_MEMORY__ and __QUAD_MEMORY_ATOMIC__ based on what type of quad memory support is available. 2014-04-04 Bill Schmidt Apply mainline r202190, powerpc64le multilibs and multiarch dir 2013-09-03 Alan Modra * config.gcc (powerpc*-*-linux*): Add support for little-endian multilibs to big-endian target and vice versa. * config/rs6000/t-linux64: Use := assignment on all vars. (MULTILIB_EXTRA_OPTS): Remove fPIC. (MULTILIB_OSDIRNAMES): Specify using mapping from multilib_options. * config/rs6000/t-linux64le: New file. * config/rs6000/t-linux64bele: New file. * config/rs6000/t-linux64lebe: New file. 2014-04-04 Bill Schmidt Back port from mainline 2014-01-16 Michael Meissner PR target/59844 * config/rs6000/rs6000.md (reload_vsx_from_gprsf): Add little endian support, remove tests for WORDS_BIG_ENDIAN. (p8_mfvsrd_3_): Likewise. (reload_gpr_from_vsx): Likewise. (reload_gpr_from_vsxsf): Likewise. (p8_mfvsrd_4_disf): Likewise. 2014-04-04 Bill Schmidt Backport from mainline 2013-04-05 Bill Schmidt PR target/56843 * config/rs6000/rs6000.c (rs6000_emit_swdiv_high_precision): Remove. (rs6000_emit_swdiv_low_precision): Remove. (rs6000_emit_swdiv): Rewrite to handle between one and four iterations of Newton-Raphson generally; modify required number of iterations for some cases. * config/rs6000/rs6000.h (RS6000_RECIP_HIGH_PRECISION_P): Remove. 2014-04-04 Bill Schmidt Backport from mainline 2013-08-19 Peter Bergner Jakub Jelinek * builtins.def (BUILT_IN_FABSD32): New DFP ABS builtin. (BUILT_IN_FABSD64): Likewise. (BUILT_IN_FABSD128): Likewise. * builtins.c (expand_builtin): Add support for new DFP ABS builtins. (fold_builtin_1): Likewise. * config/rs6000/dfp.md (*abstd2_fpr): Handle non-overlapping destination and source operands. (*nabstd2_fpr): Likewise. 2014-04-04 Bill Schmidt Apply mainline r205060. 2013-11-20 Alan Modra * config/rs6000/sysv4.h (CC1_ENDIAN_LITTLE_SPEC): Define as empty. * config/rs6000/rs6000.c (rs6000_option_override_internal): Default to strict alignment on older processors when little-endian. * config/rs6000/linux64.h (PROCESSOR_DEFAULT64): Default to power8 for ELFv2. 2014-04-04 Bill Schmidt POWER ELFv2 ABI Support Backport from mainline r204842: 2013-11-15 Ulrich Weigand * doc/invoke.texi (-mabi=elfv1, -mabi=elfv2): Document. Backport from mainline r204809: 2013-11-14 Ulrich Weigand * config/rs6000/sysv4le.h (LINUX64_DEFAULT_ABI_ELFv2): Define. Backport from mainline r204808: 2013-11-14 Ulrich Weigand Alan Modra * config/rs6000/rs6000.h (RS6000_SAVE_AREA): Handle ABI_ELFv2. (RS6000_SAVE_TOC): Remove. (RS6000_TOC_SAVE_SLOT): New macro. * config/rs6000/rs6000.c (rs6000_parm_offset): New function. (rs6000_parm_start): Use it. (rs6000_function_arg_advance_1): Likewise. (rs6000_emit_prologue): Use RS6000_TOC_SAVE_SLOT. (rs6000_emit_epilogue): Likewise. (rs6000_call_aix): Likewise. (rs6000_output_function_prologue): Do not save/restore r11 around calling _mcount for ABI_ELFv2. 2013-11-14 Ulrich Weigand Alan Modra * config/rs6000/rs6000-protos.h (rs6000_reg_parm_stack_space): Add prototype. * config/rs6000/rs6000.h (RS6000_REG_SAVE): Remove. (REG_PARM_STACK_SPACE): Call rs6000_reg_parm_stack_space. * config/rs6000/rs6000.c (rs6000_parm_needs_stack): New function. (rs6000_function_parms_need_stack): Likewise. (rs6000_reg_parm_stack_space): Likewise. (rs6000_function_arg): Do not replace BLKmode by Pmode when returning a register argument. 2013-11-14 Ulrich Weigand Michael Gschwind * config/rs6000/rs6000.h (FP_ARG_MAX_RETURN): New macro. (ALTIVEC_ARG_MAX_RETURN): Likewise. (FUNCTION_VALUE_REGNO_P): Use them. * config/rs6000/rs6000.c (TARGET_RETURN_IN_MSB): Define. (rs6000_return_in_msb): New function. (rs6000_return_in_memory): Handle ELFv2 homogeneous aggregates. Handle aggregates of up to 16 bytes for ELFv2. (rs6000_function_value): Handle ELFv2 homogeneous aggregates. 2013-11-14 Ulrich Weigand Michael Gschwind * config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define. * config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function. (rs6000_discover_homogeneous_aggregate): Likewise. (rs6000_function_arg_boundary): Handle homogeneous aggregates. (rs6000_function_arg_advance_1): Likewise. (rs6000_function_arg): Likewise. (rs6000_arg_partial_bytes): Likewise. (rs6000_psave_function_arg): Handle BLKmode arguments. 2013-11-14 Ulrich Weigand Michael Gschwind * config/rs6000/rs6000.h (AGGR_ARG_NUM_REG): Define. * config/rs6000/rs6000.c (rs6000_aggregate_candidate): New function. (rs6000_discover_homogeneous_aggregate): Likewise. (rs6000_function_arg_boundary): Handle homogeneous aggregates. (rs6000_function_arg_advance_1): Likewise. (rs6000_function_arg): Likewise. (rs6000_arg_partial_bytes): Likewise. (rs6000_psave_function_arg): Handle BLKmode arguments. 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (machine_function): New member r2_setup_needed. (rs6000_emit_prologue): Set r2_setup_needed if necessary. (rs6000_output_mi_thunk): Set r2_setup_needed. (rs6000_output_function_prologue): Output global entry point prologue and local entry point marker if needed for ABI_ELFv2. Output -mprofile-kernel code here. (output_function_profiler): Do not output -mprofile-kernel code here; moved to rs6000_output_function_prologue. (rs6000_file_start): Output ".abiversion 2" for ABI_ELFv2. (rs6000_emit_move): Do not handle dot symbols for ABI_ELFv2. (rs6000_output_function_entry): Likewise. (rs6000_assemble_integer): Likewise. (rs6000_elf_encode_section_info): Likewise. (rs6000_elf_declare_function_name): Do not create dot symbols or .opd section for ABI_ELFv2. (rs6000_trampoline_size): Update for ABI_ELFv2 trampolines. (rs6000_trampoline_init): Likewise. (rs6000_elf_file_end): Call file_end_indicate_exec_stack for ABI_ELFv2. (rs6000_call_aix): Handle ELFv2 indirect calls. Do not check for function descriptors in ABI_ELFv2. * config/rs6000/rs6000.md ("*call_indirect_aix"): Support on ABI_AIX only, not ABI_ELFv2. ("*call_value_indirect_aix"): Likewise. ("*call_indirect_elfv2"): New pattern. ("*call_value_indirect_elfv2"): Likewise. * config/rs6000/predicates.md ("symbol_ref_operand"): Do not check for function descriptors in ABI_ELFv2. ("current_file_function_operand"): Likewise. * config/rs6000/ppc-asm.h [__powerpc64__ && _CALL_ELF == 2]: (toc): Undefine. (FUNC_NAME): Define ELFv2 variant. (JUMP_TARGET): Likewise. (FUNC_START): Likewise. (HIDDEN_FUNC): Likewise. (FUNC_END): Likeiwse. 2013-11-14 Ulrich Weigand * config.gcc [powerpc*-*-* | rs6000-*-*]: Support --with-abi=elfv1 and --with-abi=elfv2. * config/rs6000/option-defaults.h (OPTION_DEFAULT_SPECS): Add "abi". * config/rs6000/rs6000.opt (mabi=elfv1): New option. (mabi=elfv2): Likewise. * config/rs6000/rs6000-opts.h (enum rs6000_abi): Add ABI_ELFv2. * config/rs6000/linux64.h (DEFAULT_ABI): Do not hard-code to AIX_ABI if !RS6000_BI_ARCH. (ELFv2_ABI_CHECK): New macro. (SUBSUBTARGET_OVERRIDE_OPTIONS): Use it to decide whether to set rs6000_current_abi to ABI_AIX or ABI_ELFv2. (GLIBC_DYNAMIC_LINKER64): Support ELFv2 ld.so version. * config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Predefine _CALL_ELF and __STRUCT_PARM_ALIGN__ if appropriate. * config/rs6000/rs6000.c (rs6000_debug_reg_global): Handle ABI_ELFv2. (debug_stack_info): Likewise. (rs6000_file_start): Treat ABI_ELFv2 the same as ABI_AIX. (rs6000_legitimize_tls_address): Likewise. (rs6000_conditional_register_usage): Likewise. (rs6000_emit_move): Likewise. (init_cumulative_args): Likewise. (rs6000_function_arg_advance_1): Likewise. (rs6000_function_arg): Likewise. (rs6000_arg_partial_bytes): Likewise. (rs6000_output_function_entry): Likewise. (rs6000_assemble_integer): Likewise. (rs6000_savres_strategy): Likewise. (rs6000_stack_info): Likewise. (rs6000_function_ok_for_sibcall): Likewise. (rs6000_emit_load_toc_table): Likewise. (rs6000_savres_routine_name): Likewise. (ptr_regno_for_savres): Likewise. (rs6000_emit_prologue): Likewise. (rs6000_emit_epilogue): Likewise. (rs6000_output_function_epilogue): Likewise. (output_profile_hook): Likewise. (output_function_profiler): Likewise. (rs6000_trampoline_size): Likewise. (rs6000_trampoline_init): Likewise. (rs6000_elf_output_toc_section_asm_op): Likewise. (rs6000_elf_encode_section_info): Likewise. (rs6000_elf_reloc_rw_mask): Likewise. (rs6000_elf_declare_function_name): Likewise. (rs6000_function_arg_boundary): Treat ABI_ELFv2 the same as ABI_AIX, except that rs6000_compat_align_parm is always assumed false. (rs6000_gimplify_va_arg): Likewise. (rs6000_call_aix): Update comment. (rs6000_sibcall_aix): Likewise. * config/rs6000/rs6000.md ("tls_gd_aix"): Treat ABI_ELFv2 the same as ABI_AIX. ("*tls_gd_call_aix"): Likewise. ("tls_ld_aix"): Likewise. ("*tls_ld_call_aix"): Likewise. ("load_toc_aix_si"): Likewise. ("load_toc_aix_di"): Likewise. ("call"): Likewise. ("call_value"): Likewise. ("*call_local_aix"): Likewise. ("*call_value_local_aix"): Likewise. ("*call_nonlocal_aix"): Likewise. ("*call_value_nonlocal_aix"): Likewise. ("*call_indirect_aix"): Likewise. ("*call_value_indirect_aix"): Likewise. ("sibcall"): Likewise. ("sibcall_value"): Likewise. ("*sibcall_aix"): Likewise. ("*sibcall_value_aix"): Likewise. * config/rs6000/predicates.md ("symbol_ref_operand"): Likewise. ("current_file_function_operand"): Likewise. Backport from mainline r204807: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_arg_partial_bytes): Simplify logic by making use of the fact that for vector / floating point arguments passed both in VRs/FPRs and in the fixed parameter area, the partial bytes mechanism is in fact not used. Backport from mainline r204806: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_psave_function_arg): New function. (rs6000_finish_function_arg): Likewise. (rs6000_function_arg): Use rs6000_psave_function_arg and rs6000_finish_function_arg to handle both vector and floating point arguments that are also passed in GPRs / the stack. Backport from mainline r204805: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (USE_FP_FOR_ARG_P): Remove TYPE argument. (USE_ALTIVEC_FOR_ARG_P): Likewise. (rs6000_darwin64_record_arg_advance_recurse): Update uses. (rs6000_function_arg_advance_1):Likewise. (rs6000_darwin64_record_arg_recurse): Likewise. (rs6000_function_arg): Likewise. (rs6000_arg_partial_bytes): Likewise. Backport from mainline r204804: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_option_override_internal): Replace "DEFAULT_ABI != ABI_AIX" test by testing for ABI_V4 or ABI_DARWIN. (rs6000_savres_strategy): Likewise. (rs6000_return_addr): Likewise. (rs6000_emit_load_toc_table): Replace "DEFAULT_ABI != ABI_AIX" by testing for ABI_V4 (since ABI_DARWIN is impossible here). (rs6000_emit_prologue): Likewise. (legitimate_lo_sum_address_p): Simplify DEFAULT_ABI test. (rs6000_elf_declare_function_name): Remove duplicated test. * config/rs6000/rs6000.md ("load_toc_v4_PIC_1"): Explicitly test for ABI_V4 (instead of "DEFAULT_ABI != ABI_AIX" test). ("load_toc_v4_PIC_1_normal"): Likewise. ("load_toc_v4_PIC_1_476"): Likewise. ("load_toc_v4_PIC_1b"): Likewise. ("load_toc_v4_PIC_1b_normal"): Likewise. ("load_toc_v4_PIC_1b_476"): Likewise. ("load_toc_v4_PIC_2"): Likewise. ("load_toc_v4_PIC_3b"): Likewise. ("load_toc_v4_PIC_3c"): Likewise. * config/rs6000/rs6000.h (RS6000_REG_SAVE): Simplify DEFAULT_ABI test. (RS6000_SAVE_AREA): Likewise. (FP_ARG_MAX_REG): Likewise. (RETURN_ADDRESS_OFFSET): Likewise. * config/rs6000/sysv.h (TARGET_TOC): Test for ABI_V4 instead of ABI_AIX. (SUBTARGET_OVERRIDE_OPTIONS): Likewise. (MINIMAL_TOC_SECTION_ASM_OP): Likewise. Backport from mainline r204803: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_call_indirect_aix): Rename to ... (rs6000_call_aix): ... this. Handle both direct and indirect calls. Create call insn directly instead of via various gen_... routines. Mention special registers used by the call in CALL_INSN_FUNCTION_USAGE. (rs6000_sibcall_aix): New function. * config/rs6000/rs6000.md (TOC_SAVE_OFFSET_32BIT): Remove. (TOC_SAVE_OFFSET_64BIT): Likewise. (AIX_FUNC_DESC_TOC_32BIT): Likewise. (AIX_FUNC_DESC_TOC_64BIT): Likewise. (AIX_FUNC_DESC_SC_32BIT): Likewise. (AIX_FUNC_DESC_SC_64BIT): Likewise. ("call" expander): Call rs6000_call_aix. ("call_value" expander): Likewise. ("call_indirect_aix"): Replace this pattern ... ("call_indirect_aix_nor11"): ... and this pattern ... ("*call_indirect_aix"): ... by this insn pattern. ("call_value_indirect_aix"): Replace this pattern ... ("call_value_indirect_aix_nor11"): ... and this pattern ... ("*call_value_indirect_aix"): ... by this insn pattern. ("*call_nonlocal_aix32", "*call_nonlocal_aix64"): Replace by ... ("*call_nonlocal_aix"): ... this pattern. ("*call_value_nonlocal_aix32", "*call_value_nonlocal_aix64"): Replace ("*call_value_nonlocal_aix"): ... by this pattern. ("*call_local_aix"): New insn pattern. ("*call_value_local_aix"): Likewise. ("sibcall" expander): Call rs6000_sibcall_aix. ("sibcall_value" expander): Likewise. Move earlier in file. ("*sibcall_nonlocal_aix"): Replace by ... ("*sibcall_aix"): ... this pattern. ("*sibcall_value_nonlocal_aix"): Replace by ... ("*sibcall_value_aix"): ... this pattern. * config/rs6000/rs6000-protos.h (rs6000_call_indirect_aix): Remove. (rs6000_call_aix): Add prototype. (rs6000_sibcall_aix): Likewise. Backport from mainline r204799: 2013-11-14 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_emit_prologue): Do not place a RTX_FRAME_RELATED_P marker on the UNSPEC_MOVESI_FROM_CR insn. Instead, add USEs of all modified call-saved CR fields to the insn storing the result to the stack slot, and provide an appropriate REG_FRAME_RELATED_EXPR for that insn. * config/rs6000/rs6000.md ("*crsave"): New insn pattern. * config/rs6000/predicates.md ("crsave_operation"): New predicate. 2014-04-04 Bill Schmidt ELFv2 ABI Call Support Backport from mainline r204798: 2013-11-14 Ulrich Weigand Alan Modra * function.c (assign_parms): Use all.reg_parm_stack_space instead of re-evaluating REG_PARM_STACK_SPACE target macro. (locate_and_pad_parm): New parameter REG_PARM_STACK_SPACE. Use it instead of evaluating target macro REG_PARM_STACK_SPACE every time. (assign_parm_find_entry_rtl): Update call. * calls.c (initialize_argument_information): Update call. (emit_library_call_value_1): Likewise. * expr.h (locate_and_pad_parm): Update prototype. Backport from mainline r204797: 2013-11-14 Ulrich Weigand * calls.c (store_unaligned_arguments_into_pseudos): Skip PARALLEL arguments. Backport from mainline r197003: 2013-03-23 Eric Botcazou * calls.c (expand_call): Add missing guard to code handling return of non-BLKmode structures in MSB. * function.c (expand_function_end): Likewise. 2014-04-04 Bill Schmidt Backport from mainline r201750. Note: Default setting of -mcompat-align-parm inverted! 2013-08-14 Bill Schmidt PR target/57949 * doc/invoke.texi: Add documentation of mcompat-align-parm option. * config/rs6000/rs6000.opt: Add mcompat-align-parm option. * config/rs6000/rs6000.c (rs6000_function_arg_boundary): For AIX and Linux, correct BLKmode alignment when 128-bit alignment is required and compatibility flag is not set. (rs6000_gimplify_va_arg): For AIX and Linux, honor specified alignment for zero-size arguments when compatibility flag is not set. 2014-04-04 Bill Schmidt Little Endian Vector Support Backport from mainline r205333 2013-11-24 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vec_perm_const_1): Correct for little endian. Backport from mainline r205241 2013-11-21 Bill Schmidt * config/rs6000/vector.md (vec_pack_trunc_v2df): Revert previous little endian change. (vec_pack_sfix_trunc_v2df): Likewise. (vec_pack_ufix_trunc_v2df): Likewise. * config/rs6000/rs6000.c (rs6000_expand_interleave): Correct double checking of endianness. Backport from mainline r205146 2013-11-20 Bill Schmidt * config/rs6000/vsx.md (vsx_set_): Adjust for little endian. (vsx_extract_): Likewise. (*vsx_extract__one_le): New LE variant on *vsx_extract__zero. (vsx_extract_v4sf): Adjust for little endian. Backport from mainline r205080 2013-11-19 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Adjust V16QI vector splat case for little endian. Backport from mainline r205045: 2013-11-19 Ulrich Weigand * config/rs6000/vector.md ("mov"): Do not call rs6000_emit_le_vsx_move to move into or out of GPRs. * config/rs6000/rs6000.c (rs6000_emit_le_vsx_move): Assert source and destination are not GPR hard regs. Backport from mainline r204920 2011-11-17 Bill Schmidt * config/rs6000/rs6000.c (rs6000_frame_related): Add split_reg parameter and use it in REG_FRAME_RELATED_EXPR note. (emit_frame_save): Call rs6000_frame_related with extra NULL_RTX parameter. (rs6000_emit_prologue): Likewise, but for little endian VSX stores, pass the source register of the store instead. Backport from mainline r204862 2013-11-15 Bill Schmidt * config/rs6000/altivec.md (UNSPEC_VPERM_X, UNSPEC_VPERM_UNS_X): Remove. (altivec_vperm_): Revert earlier little endian change. (*altivec_vperm__internal): Remove. (altivec_vperm__uns): Revert earlier little endian change. (*altivec_vperm__uns_internal): Remove. * config/rs6000/vector.md (vec_realign_load_): Revise commentary. Backport from mainline r204441 2013-11-05 Bill Schmidt * config/rs6000/rs6000.c (rs6000_option_override_internal): Remove restriction against use of VSX instructions when generating code for little endian mode. Backport from mainline r204440 2013-11-05 Bill Schmidt * config/rs6000/altivec.md (mulv4si3): Ensure we generate vmulouh for both big and little endian. (mulv8hi3): Swap input operands for merge high and merge low instructions for little endian. Backport from mainline r204439 2013-11-05 Bill Schmidt * config/rs6000/altivec.md (vec_widen_umult_even_v16qi): Change define_insn to define_expand that uses even patterns for big endian and odd patterns for little endian. (vec_widen_smult_even_v16qi): Likewise. (vec_widen_umult_even_v8hi): Likewise. (vec_widen_smult_even_v8hi): Likewise. (vec_widen_umult_odd_v16qi): Likewise. (vec_widen_smult_odd_v16qi): Likewise. (vec_widen_umult_odd_v8hi): Likewise. (vec_widen_smult_odd_v8hi): Likewise. (altivec_vmuleub): New define_insn. (altivec_vmuloub): Likewise. (altivec_vmulesb): Likewise. (altivec_vmulosb): Likewise. (altivec_vmuleuh): Likewise. (altivec_vmulouh): Likewise. (altivec_vmulesh): Likewise. (altivec_vmulosh): Likewise. Backport from mainline r204395 2013-11-05 Bill Schmidt * config/rs6000/vector.md (vec_pack_sfix_trunc_v2df): Adjust for little endian. (vec_pack_ufix_trunc_v2df): Likewise. Backport from mainline r204363 2013-11-04 Bill Schmidt * config/rs6000/altivec.md (vec_widen_umult_hi_v16qi): Swap arguments to merge instruction for little endian. (vec_widen_umult_lo_v16qi): Likewise. (vec_widen_smult_hi_v16qi): Likewise. (vec_widen_smult_lo_v16qi): Likewise. (vec_widen_umult_hi_v8hi): Likewise. (vec_widen_umult_lo_v8hi): Likewise. (vec_widen_smult_hi_v8hi): Likewise. (vec_widen_smult_lo_v8hi): Likewise. Backport from mainline r204350 2013-11-04 Bill Schmidt * config/rs6000/vsx.md (*vsx_le_perm_store_ for VSX_D): Replace the define_insn_and_split with a define_insn and two define_splits, with the split after reload re-permuting the source register to its original value. (*vsx_le_perm_store_ for VSX_W): Likewise. (*vsx_le_perm_store_v8hi): Likewise. (*vsx_le_perm_store_v16qi): Likewise. Backport from mainline r204321 2013-11-04 Bill Schmidt * config/rs6000/vector.md (vec_pack_trunc_v2df): Adjust for little endian. Backport from mainline r204321 2013-11-02 Bill Schmidt * config/rs6000/rs6000.c (rs6000_expand_vector_set): Adjust for little endian. Backport from mainline r203980 2013-10-23 Bill Schmidt * config/rs6000/altivec.md (mulv8hi3): Adjust for little endian. Backport from mainline r203930 2013-10-22 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Reverse meaning of merge-high and merge-low masks for little endian; avoid use of vector-pack masks for little endian for mismatched modes. Backport from mainline r203877 2013-10-20 Bill Schmidt * config/rs6000/altivec.md (vec_unpacku_hi_v16qi): Adjust for little endian. (vec_unpacku_hi_v8hi): Likewise. (vec_unpacku_lo_v16qi): Likewise. (vec_unpacku_lo_v8hi): Likewise. Backport from mainline r203863 2013-10-19 Bill Schmidt * config/rs6000/rs6000.c (vspltis_constant): Make sure we check all elements for both endian flavors. Backport from mainline r203714 2013-10-16 Bill Schmidt * gcc/config/rs6000/vector.md (vec_unpacks_hi_v4sf): Correct for endianness. (vec_unpacks_lo_v4sf): Likewise. (vec_unpacks_float_hi_v4si): Likewise. (vec_unpacks_float_lo_v4si): Likewise. (vec_unpacku_float_hi_v4si): Likewise. (vec_unpacku_float_lo_v4si): Likewise. Backport from mainline r203713 2013-10-16 Bill Schmidt * config/rs6000/vsx.md (vsx_concat_): Adjust output for LE. (vsx_concat_v2sf): Likewise. Backport from mainline r203458 2013-10-11 Bill Schmidt * config/rs6000/vsx.md (*vsx_le_perm_load_v2di): Generalize to handle vector float as well. (*vsx_le_perm_load_v4si): Likewise. (*vsx_le_perm_store_v2di): Likewise. (*vsx_le_perm_store_v4si): Likewise. Backport from mainline r203457 2013-10-11 Bill Schmidt * config/rs6000/vector.md (vec_realign_load): Generate vperm directly to circumvent subtract from splat{31} workaround. * config/rs6000/rs6000-protos.h (altivec_expand_vec_perm_le): New prototype. * config/rs6000/rs6000.c (altivec_expand_vec_perm_le): New. * config/rs6000/altivec.md (define_c_enum "unspec"): Add UNSPEC_VPERM_X and UNSPEC_VPERM_UNS_X. (altivec_vperm_): Convert to define_insn_and_split to separate big and little endian logic. (*altivec_vperm__internal): New define_insn. (altivec_vperm__uns): Convert to define_insn_and_split to separate big and little endian logic. (*altivec_vperm__uns_internal): New define_insn. (vec_permv16qi): Add little endian logic. Backport from mainline r203247 2013-10-07 Bill Schmidt * config/rs6000/rs6000.c (altivec_expand_vec_perm_const_le): New. (altivec_expand_vec_perm_const): Call it. Backport from mainline r203246 2013-10-07 Bill Schmidt * config/rs6000/vector.md (mov): Emit permuted move sequences for LE VSX loads and stores at expand time. * config/rs6000/rs6000-protos.h (rs6000_emit_le_vsx_move): New prototype. * config/rs6000/rs6000.c (rs6000_const_vec): New. (rs6000_gen_le_vsx_permute): New. (rs6000_gen_le_vsx_load): New. (rs6000_gen_le_vsx_store): New. (rs6000_gen_le_vsx_move): New. * config/rs6000/vsx.md (*vsx_le_perm_load_v2di): New. (*vsx_le_perm_load_v4si): New. (*vsx_le_perm_load_v8hi): New. (*vsx_le_perm_load_v16qi): New. (*vsx_le_perm_store_v2di): New. (*vsx_le_perm_store_v4si): New. (*vsx_le_perm_store_v8hi): New. (*vsx_le_perm_store_v16qi): New. (*vsx_xxpermdi2_le_): New. (*vsx_xxpermdi4_le_): New. (*vsx_xxpermdi8_le_V8HI): New. (*vsx_xxpermdi16_le_V16QI): New. (*vsx_lxvd2x2_le_): New. (*vsx_lxvd2x4_le_): New. (*vsx_lxvd2x8_le_V8HI): New. (*vsx_lxvd2x16_le_V16QI): New. (*vsx_stxvd2x2_le_): New. (*vsx_stxvd2x4_le_): New. (*vsx_stxvd2x8_le_V8HI): New. (*vsx_stxvd2x16_le_V16QI): New. Backport from mainline r201235 2013-07-24 Bill Schmidt Anton Blanchard * config/rs6000/altivec.md (altivec_vpkpx): Handle little endian. (altivec_vpksss): Likewise. (altivec_vpksus): Likewise. (altivec_vpkuus): Likewise. (altivec_vpkuum): Likewise. Backport from mainline r201208 2013-07-24 Bill Schmidt Anton Blanchard * config/rs6000/vector.md (vec_realign_load_): Reorder input operands to vperm for little endian. * config/rs6000/rs6000.c (rs6000_expand_builtin): Use lvsr instead of lvsl to create the control mask for a vperm for little endian. Backport from mainline r201195 2013-07-23 Bill Schmidt Anton Blanchard * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Reverse two operands for little-endian. Backport from mainline r201193 2013-07-23 Bill Schmidt Anton Blanchard * config/rs6000/rs6000.c (altivec_expand_vec_perm_const): Correct selection of field for vector splat in little endian mode. Backport from mainline r201149 2013-07-22 Bill Schmidt Anton Blanchard * config/rs6000/rs6000.c (rs6000_expand_vector_init): Fix endianness when selecting field to splat. 2014-04-04 Bill Schmidt Backport from mainline r205123: 2013-11-20 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_cannot_change_mode_class): Do not allow subregs of TDmode in FPRs of smaller size in little-endian. (rs6000_split_multireg_move): When splitting an access to TDmode in FPRs, do not use simplify_gen_subreg. Backport from mainline r204927: 2013-11-17 Ulrich Weigand * config/rs6000/rs6000.c (rs6000_emit_move): Use low word of sdmode_stack_slot also in little-endian mode. 2014-04-04 Bill Schmidt Power8 HTM Support Backport from mainline 2013-12-03 Peter Bergner * config/rs6000/htmintrin.h (_TEXASR_INSTRUCTION_FETCH_CONFLICT): Fix typo in macro name. (_TEXASRU_INSTRUCTION_FETCH_CONFLICT): Likewise. Backport from mainline r205233. 2013-11-21 Peter Bergner * doc/extend.texi: Document htm builtins. Backport from mainline 2013-07-17 Iain Sandoe * config/rs6000/darwin.h (REGISTER_NAMES): Add HTM registers. Backport from mainline 2013-07-16 Peter Bergner * config/rs6000/rs6000.c (rs6000_option_override_internal): Do not enable extra ISA flags with TARGET_HTM. 2013-07-16 Jakub Jelinek Peter Bergner * config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTERS): Mention HTM registers in the comment. (DWARF_FRAME_REGISTERS): Subtract also the 3 HTM registers. (DWARF_REG_TO_UNWIND_COLUMN): Use DWARF_FRAME_REGISTERS rather than FIRST_PSEUDO_REGISTERS. * config.gcc (powerpc*-*-*): Install htmintrin.h and htmxlintrin.h. * config/rs6000/t-rs6000 (MD_INCLUDES): Add htm.md. * config/rs6000/rs6000.opt: Add -mhtm option. * config/rs6000/rs6000-cpus.def (POWERPC_MASKS): Add OPTION_MASK_HTM. (ISA_2_7_MASKS_SERVER): Add OPTION_MASK_HTM. * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define __HTM__ if the HTM instructions are available. * config/rs6000/predicates.md (u3bit_cint_operand, u10bit_cint_operand) (htm_spr_reg_operand): New define_predicates. * config/rs6000/rs6000.md (define_attr "type"): Add htm. (TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO): New define_constants. Include htm.md. * config/rs6000/rs6000-builtin.def (BU_HTM_0, BU_HTM_1, BU_HTM_2) (BU_HTM_3, BU_HTM_SPR0, BU_HTM_SPR1): Add support macros for defining HTM builtin functions. * config/rs6000/rs6000.c (RS6000_BUILTIN_H): New macro. (rs6000_reg_names, alt_reg_names): Add HTM SPR register names. (rs6000_init_hard_regno_mode_ok): Add support for HTM instructions. (rs6000_builtin_mask_calculate): Likewise. (rs6000_option_override_internal): Likewise. (bdesc_htm): Add new HTM builtin support. (htm_spr_num): New function. (htm_spr_regno): Likewise. (rs6000_htm_spr_icode): Likewise. (htm_expand_builtin): Likewise. (htm_init_builtins): Likewise. (rs6000_expand_builtin): Add support for HTM builtin functions. (rs6000_init_builtins): Likewise. (rs6000_invalid_builtin, rs6000_opt_mask): Add support for -mhtm option. * config/rs6000/rs6000.h (ASM_CPU_SPEC): Add support for -mhtm. (TARGET_HTM, MASK_HTM): Define macros. (FIRST_PSEUDO_REGISTER): Adjust for new HTM SPR registers. (FIXED_REGISTERS): Likewise. (CALL_USED_REGISTERS): Likewise. (CALL_REALLY_USED_REGISTERS): Likewise. (REG_ALLOC_ORDER): Likewise. (enum reg_class): Likewise. (REG_CLASS_NAMES): Likewise. (REG_CLASS_CONTENTS): Likewise. (REGISTER_NAMES): Likewise. (ADDITIONAL_REGISTER_NAMES): Likewise. (RS6000_BTC_SPR, RS6000_BTC_VOID, RS6000_BTC_32BIT, RS6000_BTC_64BIT) (RS6000_BTC_MISC_MASK, RS6000_BTM_HTM): New macros. (RS6000_BTM_COMMON): Add RS6000_BTM_HTM. * config/rs6000/htm.md: New file. * config/rs6000/htmintrin.h: New file. * config/rs6000/htmxlintrin.h: New file. 2014-04-04 Bill Schmidt Power8 Base Support Apply mainline 2013-11-23 Alan Modra * config/rs6000/vsx.md (fusion peepholes): Disable when !TARGET_VSX. Backport from mainline 2013-11-12 Michael Meissner PR target/59054 * config/rs6000/rs6000.md (movdi_internal32): Eliminate constraints that would allow DImode into the traditional Altivec registers, but cause undesirable code generation when loading 0 as a constant. (movdi_internal64): Likewise. (cmp_fpr): Do not use %x for CR register output. (extendsfdf2_fpr): Fix constraints when -mallow-upper-df and -mallow-upper-sf debug switches are used. Backport from mainline 2013-10-17 Michael Meissner * config/rs6000/rs6000.c (enum rs6000_reload_reg_type): Add new fields to the reg_addr array that describes the valid addressing mode for any register, general purpose registers, floating point registers, and Altivec registers. (FIRST_RELOAD_REG_CLASS): Likewise. (LAST_RELOAD_REG_CLASS): Likewise. (struct reload_reg_map_type): Likewise. (reload_reg_map_type): Likewise. (RELOAD_REG_VALID): Likewise. (RELOAD_REG_MULTIPLE): Likewise. (RELOAD_REG_INDEXED): Likewise. (RELOAD_REG_OFFSET): Likewise. (RELOAD_REG_PRE_INCDEC): Likewise. (RELOAD_REG_PRE_MODIFY): Likewise. (reg_addr): Likewise. (mode_supports_pre_incdec_p): New helper functions to say whether a given mode supports PRE_INC, PRE_DEC, and PRE_MODIFY. (mode_supports_pre_modify_p): Likewise. (rs6000_debug_vector_unit): Rearrange the -mdebug=reg output to print the valid address mode bits for each mode. (rs6000_debug_print_mode): Likewise. (rs6000_debug_reg_global): Likewise. (rs6000_setup_reg_addr_masks): New function to set up the address mask bits for each type. (rs6000_init_hard_regno_mode_ok): Use memset to clear arrays. Call rs6000_setup_reg_addr_masks to set up the address mask bits. (rs6000_legitimate_address_p): Use mode_supports_pre_incdec_p and mode_supports_pre_modify_p to determine if PRE_INC, PRE_DEC, and PRE_MODIFY are supported. (rs6000_output_move_128bit): Change to use {src,dest}_vmx_p for altivec registers, instead of {src,dest}_av_p. (rs6000_print_options_internal): Tweak the debug output slightly. Backport from mainline 2013-10-03 Michael Meissner * config/rs6000/rs6000-builtin.def (XSRDPIM): Use floatdf2, ceildf2, btruncdf2, instead of vsx_* name. * config/rs6000/vsx.md (vsx_add3): Change arithmetic iterators to only do V2DF and V4SF here. Move the DF code to rs6000.md where it is combined with SF mode. Replace with just 'v' since only vector operations are handled with these insns after moving the DF support to rs6000.md. (vsx_sub3): Likewise. (vsx_mul3): Likewise. (vsx_div3): Likewise. (vsx_fre2): Likewise. (vsx_neg2): Likewise. (vsx_abs2): Likewise. (vsx_nabs2): Likewise. (vsx_smax3): Likewise. (vsx_smin3): Likewise. (vsx_sqrt2): Likewise. (vsx_rsqrte2): Likewise. (vsx_fms4): Likewise. (vsx_nfma4): Likewise. (vsx_copysign3): Likewise. (vsx_btrunc2): Likewise. (vsx_floor2): Likewise. (vsx_ceil2): Likewise. (vsx_smaxsf3): Delete scalar ops that were moved to rs6000.md. (vsx_sminsf3): Likewise. (vsx_fmadf4): Likewise. (vsx_fmsdf4): Likewise. (vsx_nfmadf4): Likewise. (vsx_nfmsdf4): Likewise. (vsx_cmpdf_internal1): Likewise. * config/rs6000/rs6000.h (TARGET_SF_SPE): Define macros to make it simpler to select whether a target has SPE or traditional floating point support in iterators. (TARGET_DF_SPE): Likewise. (TARGET_SF_FPR): Likewise. (TARGET_DF_FPR): Likewise. (TARGET_SF_INSN): Macros to say whether floating point support exists for a given operation for expanders. (TARGET_DF_INSN): Likewise. * config/rs6000/rs6000.c (Ftrad): New mode attributes to allow combining of SF/DF mode operations, using both traditional and VSX registers. (Fvsx): Likewise. (Ff): Likewise. (Fv): Likewise. (Fs): Likewise. (Ffre): Likewise. (FFRE): Likewise. (abs2): Combine SF/DF modes using traditional floating point instructions. Add support for using the upper DF registers with VSX support, and SF registers with power8-vector support. Update expanders for operations supported by both the SPE and traditional floating point units. (abs2_fpr): Likewise. (nabs2): Likewise. (nabs2_fpr): Likewise. (neg2): Likewise. (neg2_fpr): Likewise. (add3): Likewise. (add3_fpr): Likewise. (sub3): Likewise. (sub3_fpr): Likewise. (mul3): Likewise. (mul3_fpr): Likewise. (div3): Likewise. (div3_fpr): Likewise. (sqrt3): Likewise. (sqrt3_fpr): Likewise. (fre): Likewise. (rsqrt2): Likewise. (cmp_fpr): Likewise. (smax3): Likewise. (smin3): Likewise. (smax3_vsx): Likewise. (smin3_vsx): Likewise. (negsf2): Delete SF operations that are merged with DF. (abssf2): Likewise. (addsf3): Likewise. (subsf3): Likewise. (mulsf3): Likewise. (divsf3): Likewise. (fres): Likewise. (fmasf4_fpr): Likewise. (fmssf4_fpr): Likewise. (nfmasf4_fpr): Likewise. (nfmssf4_fpr): Likewise. (sqrtsf2): Likewise. (rsqrtsf_internal1): Likewise. (smaxsf3): Likewise. (sminsf3): Likewise. (cmpsf_internal1): Likewise. (copysign3_fcpsgn): Add VSX/power8-vector support. (negdf2): Delete DF operations that are merged with SF. (absdf2): Likewise. (nabsdf2): Likewise. (adddf3): Likewise. (subdf3): Likewise. (muldf3): Likewise. (divdf3): Likewise. (fred): Likewise. (rsqrtdf_internal1): Likewise. (fmadf4_fpr): Likewise. (fmsdf4_fpr): Likewise. (nfmadf4_fpr): Likewise. (nfmsdf4_fpr): Likewise. (sqrtdf2): Likewise. (smaxdf3): Likewise. (smindf3): Likewise. (cmpdf_internal1): Likewise. (lrintdi2): Use TARGET__FPR macro. (btrunc2): Delete separate expander, and combine with the insn and add VSX instruction support. Use TARGET__FPR. (btrunc2_fpr): Likewise. (ceil2): Likewise. (ceil2_fpr): Likewise. (floor2): Likewise. (floor2_fpr): Likewise. (fma4_fpr): Combine SF and DF fused multiply/add support. Add support for using the upper registers with VSX and power8-vector. Move insns to be closer to the define_expands. On VSX systems, prefer the traditional form of FMA over the VSX version, since the traditional form allows the target not to overlap with the inputs. (fms4_fpr): Likewise. (nfma4_fpr): Likewise. (nfms4_fpr): Likewise. Backport from mainline 2013-09-27 Michael Meissner * config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok): Allow DFmode, DImode, and SFmode in the upper VSX registers based on the -mupper-regs-{df,sf} flags. Fix wu constraint to be ALTIVEC_REGS if -mpower8-vector. Combine -mvsx-timode handling with the rest of the VSX register handling. * config/rs6000/rs6000.md (f32_lv): Use %x0 for VSX regsters. (f32_sv): Likewise. (zero_extendsidi2_lfiwzx): Add support for loading into the Altivec registers with -mpower8-vector. Use wu/wv constraints to only do VSX memory options on Altivec registers. (extendsidi2_lfiwax): Likewise. (extendsfdf2_fpr): Likewise. (mov_hardfloat, SF/SD modes): Likewise. (mov_hardfloat32, DF/DD modes): Likewise. (mov_hardfloat64, DF/DD modes): Likewise. (movdi_internal64): Likewise. Backport from mainline 2013-09-23 Michael Meissner * config/rs6000/rs6000.c (rs6000_vector_reload): Delete, combine reload helper function arrays into a single array reg_addr. (reload_fpr_gpr): Likewise. (reload_gpr_vsx): Likewise. (reload_vsx_gpr): Likewise. (struct rs6000_reg_addr): Likewise. (reg_addr): Likewise. (rs6000_debug_reg_global): Change rs6000_vector_reload, reload_fpr_gpr, reload_gpr_vsx, reload_vsx_gpr uses to reg_addr. (rs6000_init_hard_regno_mode_ok): Likewise. (rs6000_secondary_reload_direct_move): Likewise. (rs6000_secondary_reload): Likewise. * config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add new constraints: wu, ww, and wy. Repurpose wv constraint added during power8 changes. Put wg constraint in alphabetical order. * config/rs6000/rs6000.opt (-mvsx-scalar-float): New debug switch for future work to add ISA 2.07 VSX single precision support. (-mvsx-scalar-double): Change default from -1 to 1, update documentation comment. (-mvsx-scalar-memory): Rename debug switch to -mupper-regs-df. (-mupper-regs-df): New debug switch to control whether DF values can go in the traditional Altivec registers. (-mupper-regs-sf): New debug switch to control whether SF values can go in the traditional Altivec registers. * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print wu, ww, and wy constraints. (rs6000_init_hard_regno_mode_ok): Use ssize_t instead of int for loop variables. Rename -mvsx-scalar-memory to -mupper-regs-df. Add new constraints, wu/ww/wy. Repurpose wv constraint. (rs6000_debug_legitimate_address_p): Print if we are running before, during, or after reload. (rs6000_secondary_reload): Add a comment. (rs6000_opt_masks): Add -mupper-regs-df, -mupper-regs-sf. * config/rs6000/constraints.md (wa constraint): Sort w constraints. Update documentation string. (wd constraint): Likewise. (wf constraint): Likewise. (wg constraint): Likewise. (wn constraint): Likewise. (ws constraint): Likewise. (wt constraint): Likewise. (wx constraint): Likewise. (wz constraint): Likewise. (wu constraint): New constraint for ISA 2.07 SFmode scalar instructions. (ww constraint): Likewise. (wy constraint): Likewise. (wv constraint): Repurpose ISA 2.07 constraint that did not use in the previous submissions. * doc/md.texi (PowerPC and IBM RS6000): Likewise. Backport from mainline 2013-10-17 Michael Meissner PR target/58673 * config/rs6000/rs6000.c (rs6000_legitimate_address_p): Only restrict TImode addresses to single indirect registers if both -mquad-memory and -mvsx-timode are used. (rs6000_output_move_128bit): Use quad_load_store_p to determine if we should emit load/store quad. Remove using %y for quad memory addresses. * config/rs6000/rs6000.md (mov_ppc64, TI/PTImode): Add constraints to allow load/store quad on machines where TImode is not allowed in VSX registers. Use 'n' instead of 'F' constraint for TImode to load integer constants. Backport from mainline 2013-10-02 Michael Meissner PR target/58587 * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Turn off setting -mvsx-timode by default until the underlying problem is fixed. (RS6000_CPU, power7 defaults): Likewise. Backport from trunk 2013-08-16 Michael Meissner PR target/58160 * config/rs6000/predicates.md (fusion_gpr_mem_load): Allow the memory rtx to contain ZERO_EXTEND and SIGN_EXTEND. * config/rs6000/rs6000-protos.h (fusion_gpr_load_p): Pass operands array instead of each individual operand as a separate argument. (emit_fusion_gpr_load): Likewise. (expand_fusion_gpr_load): Add new function declaration. * config/rs6000/rs6000.c (fusion_gpr_load_p): Change the calling signature to have the operands passed as an array, instead of as separate arguments. Allow ZERO_EXTEND to be in the memory address, and also SIGN_EXTEND if -mpower8-fusion-sign. Do not depend on the register live/dead flags when peepholes are run. (expand_fusion_gpr_load): New function to be called from the peephole2 pass, to change the register that addis sets to be the target register. (emit_fusion_gpr_load): Change the calling signature to have the operands passed as an array, instead of as separate arguments. Allow ZERO_EXTEND to be in the memory address, and also SIGN_EXTEND if -mpower8-fusion-sign. * config/rs6000/rs6000.md (UNSPEC_FUSION_GPR): Delete unused unspec enumeration. (power8 fusion peephole/peephole2): Rework the fusion peepholes to adjust the register addis loads up in the peephole2 pass. Do not depend on the register live/dead state when the peephole pass is done. Backport from trunk 2013-07-23 Michael Meissner * config/rs6000/vector.md (xor3): Move 128-bit boolean expanders to rs6000.md. (ior3): Likewise. (and3): Likewise. (one_cmpl2): Likewise. (nor3): Likewise. (andc3): Likewise. (eqv3): Likewise. (nand3): Likewise. (orc3): Likewise. * config/rs6000/rs6000-protos.h (rs6000_split_logical): New declaration. * config/rs6000/rs6000.c (rs6000_split_logical_inner): Add support to split multi-word logical operations. (rs6000_split_logical_di): Likewise. (rs6000_split_logical): Likewise. * config/rs6000/vsx.md (VSX_L2): Delete, no longer used. (vsx_and3_32bit): Move 128-bit logical insns to rs6000.md, and allow TImode operations in 32-bit. (vsx_and3_64bit): Likewise. (vsx_ior3_32bit): Likewise. (vsx_ior3_64bit): Likewise. (vsx_xor3_32bit): Likewise. (vsx_xor3_64bit): Likewise. (vsx_one_cmpl2_32bit): Likewise. (vsx_one_cmpl2_64bit): Likewise. (vsx_nor3_32bit): Likewise. (vsx_nor3_64bit): Likewise. (vsx_andc3_32bit): Likewise. (vsx_andc3_64bit): Likewise. (vsx_eqv3_32bit): Likewise. (vsx_eqv3_64bit): Likewise. (vsx_nand3_32bit): Likewise. (vsx_nand3_64bit): Likewise. (vsx_orc3_32bit): Likewise. (vsx_orc3_64bit): Likewise. * config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Always allow vector logical types in GPRs. * config/rs6000/altivec.md (altivec_and3): Move 128-bit logical insns to rs6000.md, and allow TImode operations in 32-bit. (altivec_ior3): Likewise. (altivec_xor3): Likewise. (altivec_one_cmpl2): Likewise. (altivec_nor3): Likewise. (altivec_andc3): Likewise. * config/rs6000/rs6000.md (BOOL_128): New mode iterators and mode attributes for moving the 128-bit logical operations into rs6000.md. (BOOL_REGS_OUTPUT): Likewise. (BOOL_REGS_OP1): Likewise. (BOOL_REGS_OP2): Likewise. (BOOL_REGS_UNARY): Likewise. (BOOL_REGS_AND_CR0): Likewise. (one_cmpl2): Add support for DI logical operations on 32-bit, splitting the operations to 32-bit. (anddi3): Likewise. (iordi3): Likewise. (xordi3): Likewise. (and3, 128-bit types): Rewrite 2013-06-06 logical operator changes to combine the 32/64-bit code, allow logical operations on TI mode in 32-bit, and to use similar match_operator patterns like scalar mode uses. Combine the Altivec and VSX code for logical operations, and move it here. (ior3, 128-bit types): Likewise. (xor3, 128-bit types): Likewise. (one_cmpl3, 128-bit types): Likewise. (nor3, 128-bit types): Likewise. (andc3, 128-bit types): Likewise. (eqv3, 128-bit types): Likewise. (nand3, 128-bit types): Likewise. (orc3, 128-bit types): Likewise. (and3_internal): Likewise. (bool3_internal): Likewise. (boolc3_internal1): Likewise. (boolc3_internal2): Likewise. (boolcc3_internal1): Likewise. (boolcc3_internal2): Likewise. (eqv3_internal1): Likewise. (eqv3_internal2): Likewise. (one_cmpl13_internal): Likewise. Back port from mainline: 2013-06-06 Michael Meissner Pat Haugen Peter Bergner * lib/target-supports.exp (check_p8vector_hw_available) Add power8 support. (check_effective_target_powerpc_p8vector_ok): Likewise. (is-effective-target): Likewise. (check_vect_support_and_set_flags): Likewise. Backport from mainline 2013-07-31 Michael Meissner * config/rs6000/predicates.md (fusion_gpr_addis): New predicates to support power8 load fusion. (fusion_gpr_mem_load): Likewise. * config/rs6000/rs6000-modes.def (PTImode): Update a comment. * config/rs6000/rs6000-protos.h (fusion_gpr_load_p): New declarations for power8 load fusion. (emit_fusion_gpr_load): Likewise. * config/rs6000/rs6000.c (rs6000_option_override_internal): If tuning for power8, turn on fusion mode by default. Turn on sign extending fusion mode if normal fusion mode is on, and we are at -O2 or -O3. (fusion_gpr_load_p): New function, return true if we can fuse an addis instruction with a dependent load to a GPR. (emit_fusion_gpr_load): Emit the instructions for power8 load fusion to GPRs. * config/rs6000/vsx.md (VSX_M2): New iterator for fusion peepholes. (VSX load fusion peepholes): New peepholes to fuse together an addi instruction with a VSX load instruction. * config/rs6000/rs6000.md (GPR load fusion peepholes): New peepholes to fuse an addis instruction with a load to a GPR base register. If we are supporting sign extending fusions, convert sign extending loads to zero extending loads and add an explicit sign extension. Backport from mainline 2013-07-18 Pat Haugen * config/rs6000/rs6000.c (rs6000_option_override_internal): Adjust flag interaction for new Power8 flags and VSX. Back port from the trunk 2013-06-28 Michael Meissner PR target/57744 * config/rs6000/rs6000.h (MODES_TIEABLE_P): Do not allow PTImode to tie with any other modes. Eliminate Altivec vector mode tests, since these are a subset of ALTIVEC or VSX vector modes. Simplify code, to return 0 if testing MODE2 for a condition, if we've already tested MODE1 for the same condition. Backport from mainline 2013-06-28 Pat Haugen * config/rs6000/rs6000.md (define_insn ""): Fix insn type. Back port from the trunk 2013-06-26 Michael Meissner Pat Haugen Peter Bergner * config/rs6000/power8.md: New. * config/rs6000/rs6000-cpus.def (RS6000_CPU table): Adjust processor setting for power8 entry. * config/rs6000/t-rs6000 (MD_INCLUDES): Add power8.md. * config/rs6000/rs6000.c (is_microcoded_insn, is_cracked_insn): Adjust test for Power4/Power5 only. (insn_must_be_first_in_group, insn_must_be_last_in_group): Add Power8 support. (force_new_group): Adjust comment. * config/rs6000/rs6000.md: Include power8.md. Back port from the trunk 2013-06-14 Michael Meissner PR target/57615 * config/rs6000/rs6000.md (mov_ppc64): Call rs6000_output_move_128bit to handle emitting quad memory operations. Set attribute length to 8 bytes. Back port from the trunk 2013-06-13 Michael Meissner * config/rs6000/rs6000.c (rs6000_option_override_internal): Move test for clearing quad memory on 32-bit later. Back port from the trunk 2013-06-12 Michael Meissner Pat Haugen Peter Bergner * config/rs6000/rs6000.c (emit_load_locked): Add support for power8 byte, half-word, and quad-word atomic instructions. (emit_store_conditional): Likewise. (rs6000_expand_atomic_compare_and_swap): Likewise. (rs6000_expand_atomic_op): Likewise. * config/rs6000/sync.md (larx): Add new modes for power8. (stcx): Likewise. (AINT): New mode iterator to include TImode as well as normal integer modes on power8. (fetchop_pred): Use int_reg_operand instead of gpc_reg_operand so that VSX registers are not considered. Use AINT mode iterator instead of INT1 to allow inclusion of quad word atomic operations on power8. (load_locked): Likewise. (store_conditional): Likewise. (atomic_compare_and_swap): Likewise. (atomic_exchange): Likewise. (atomic_nand): Likewise. (atomic_fetch_): Likewise. (atomic_nand_fetch): Likewise. (mem_thread_fence): Use gen_loadsync_ instead of enumerating each type. (ATOMIC): On power8, add QImode, HImode modes. (load_locked_si): Varients of load_locked for QI/HI modes that promote to SImode. (load_lockedti): Convert TImode arguments to PTImode, so that we get a guaranteed even/odd register pair. (load_lockedpti): Likewise. (store_conditionalti): Likewise. (store_conditionalpti): Likewise. * config/rs6000/rs6000.md (QHI): New mode iterator for power8 atomic load/store instructions. (HSI): Likewise. Back port from the trunk 2013-06-10 Michael Meissner Pat Haugen Peter Bergner * config/rs6000/vector.md (GPR move splitter): Do not split moves of vectors in GPRS if they are direct moves or quad word load or store moves. * config/rs6000/rs6000-protos.h (rs6000_output_move_128bit): Add declaration. (direct_move_p): Likewise. (quad_load_store_p): Likewise. * config/rs6000/rs6000.c (enum rs6000_reg_type): Simplify register classes into bins based on the physical register type. (reg_class_to_reg_type): Likewise. (IS_STD_REG_TYPE): Likewise. (IS_FP_VECT_REG_TYPE): Likewise. (reload_fpr_gpr): Arrays to determine what insn to use if we can use direct move instructions. (reload_gpr_vsx): Likewise. (reload_vsx_gpr): Likewise. (rs6000_init_hard_regno_mode_ok): Precalculate the register type information that is a simplification of register classes. Also precalculate direct move reload helpers. (direct_move_p): New function to return true if the operation can be done as a direct move instruciton. (quad_load_store_p): New function to return true if the operation is a quad memory operation. (rs6000_legitimize_address): If quad memory, only allow register indirect for TImode addresses. (rs6000_legitimate_address_p): Likewise. (enum reload_reg_type): Delete, replace with rs6000_reg_type. (rs6000_reload_register_type): Likewise. (register_to_reg_type): Return register type. (rs6000_secondary_reload_simple_move): New helper function for secondary reload and secondary memory needed to identify anything that is a simple move, and does not need reloading. (rs6000_secondary_reload_direct_move): New helper function for secondary reload to identify cases that can be done with several instructions via the direct move instructions. (rs6000_secondary_reload_move): New helper function for secondary reload to identify moves between register types that can be done. (rs6000_secondary_reload): Add support for quad memory operations and for direct move. (rs6000_secondary_memory_needed): Likewise. (rs6000_debug_secondary_memory_needed): Change argument names. (rs6000_output_move_128bit): New function to return the move to use for 128-bit moves, including knowing about the various limitations of quad memory operations. * config/rs6000/vsx.md (vsx_mov): Add support for quad memory operations. call rs6000_output_move_128bit for the actual instruciton(s) to generate. (vsx_movti_64bit): Likewise. * config/rs6000/rs6000.md (UNSPEC_P8V_FMRGOW): New unspec values. (UNSPEC_P8V_MTVSRWZ): Likewise. (UNSPEC_P8V_RELOAD_FROM_GPR): Likewise. (UNSPEC_P8V_MTVSRD): Likewise. (UNSPEC_P8V_XXPERMDI): Likewise. (UNSPEC_P8V_RELOAD_FROM_VSX): Likewise. (UNSPEC_FUSION_GPR): Likewise. (FMOVE128_GPR): New iterator for direct move. (f32_lv): New mode attribute for load/store of SFmode/SDmode values. (f32_sv): Likewise. (f32_dm): Likewise. (zero_extenddi2_internal1): Add support for power8 32-bit loads and direct move instructions. (zero_extendsidi2_lfiwzx): Likewise. (extendsidi2_lfiwax): Likewise. (extendsidi2_nocell): Likewise. (floatsi2_lfiwax): Likewise. (lfiwax): Likewise. (floatunssi2_lfiwzx): Likewise. (lfiwzx): Likewise. (fix_trunc_stfiwx): Likewise. (fixuns_trunc_stfiwx): Likewise. (mov_hardfloat, 32-bit floating point): Likewise. (mov_hardfloat64, 64-bit floating point): Likewise. (parity2_cmpb): Set length/type attr. (unnamed shift right patterns, mov_internal2): Change type attr for 'mr.' to fast_compare. (bpermd_): Change type attr to popcnt. (p8_fmrgow_): New insns for power8 direct move support. (p8_mtvsrwz_1): Likewise. (p8_mtvsrwz_2): Likewise. (reload_fpr_from_gpr): Likewise. (p8_mtvsrd_1): Likewise. (p8_mtvsrd_2): Likewise. (p8_xxpermdi_): Likewise. (reload_vsx_from_gpr): Likewise. (reload_vsx_from_gprsf): Likewise. (p8_mfvsrd_3_): LIkewise. (reload_gpr_from_vsx): Likewise. (reload_gpr_from_vsxsf): Likewise. (p8_mfvsrd_4_disf): Likewise. (multi-word GPR splits): Do not split direct moves or quad memory operations. Backport from the trunk 2013-06-06 Michael Meissner Pat Haugen Peter Bergner * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Document new power8 builtins. * config/rs6000/vector.md (and3): Add a clobber/scratch of a condition code register, to allow 128-bit logical operations to be done in the VSX or GPR registers. (nor3): Use the canonical form for nor. (eqv3): Add expanders for power8 xxleqv, xxlnand, xxlorc, vclz*, and vpopcnt* vector instructions. (nand3): Likewise. (orc3): Likewise. (clz2): LIkewise. (popcount2): Likewise. * config/rs6000/predicates.md (int_reg_operand): Rework tests so that only the GPRs are recognized. * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add support for new power8 builtins. * config/rs6000/rs6000-builtin.def (xscvspdpn): Add new power8 builtin functions. (xscvdpspn): Likewise. (vclz): Likewise. (vclzb): Likewise. (vclzh): Likewise. (vclzw): Likewise. (vclzd): Likewise. (vpopcnt): Likewise. (vpopcntb): Likewise. (vpopcnth): Likewise. (vpopcntw): Likewise. (vpopcntd): Likewise. (vgbbd): Likewise. (vmrgew): Likewise. (vmrgow): Likewise. (eqv): Likewise. (eqv_v16qi3): Likewise. (eqv_v8hi3): Likewise. (eqv_v4si3): Likewise. (eqv_v2di3): Likewise. (eqv_v4sf3): Likewise. (eqv_v2df3): Likewise. (nand): Likewise. (nand_v16qi3): Likewise. (nand_v8hi3): Likewise. (nand_v4si3): Likewise. (nand_v2di3): Likewise. (nand_v4sf3): Likewise. (nand_v2df3): Likewise. (orc): Likewise. (orc_v16qi3): Likewise. (orc_v8hi3): Likewise. (orc_v4si3): Likewise. (orc_v2di3): Likewise. (orc_v4sf3): Likewise. (orc_v2df3): Likewise. * config/rs6000/rs6000.c (rs6000_option_override_internal): Only allow power8 quad mode in 64-bit. (rs6000_builtin_vectorized_function): Add support to vectorize ISA 2.07 count leading zeros, population count builtins. (rs6000_expand_vector_init): On ISA 2.07 use xscvdpspn to form V4SF vectors instead of xscvdpsp to avoid IEEE related traps. (builtin_function_type): Add vgbbd builtin function which takes an unsigned argument. (altivec_expand_vec_perm_const): Add support for new power8 merge instructions. * config/rs6000/vsx.md (VSX_L2): New iterator for 128-bit types, that does not include TImdoe for use with 32-bit. (UNSPEC_VSX_CVSPDPN): Support for power8 xscvdpspn and xscvspdpn instructions. (UNSPEC_VSX_CVDPSPN): Likewise. (vsx_xscvdpspn): Likewise. (vsx_xscvspdpn): Likewise. (vsx_xscvdpspn_scalar): Likewise. (vsx_xscvspdpn_directmove): Likewise. (vsx_and3): Split logical operations into 32-bit and 64-bit. Add support to do logical operations on TImode as well as VSX vector types. Allow logical operations to be done in either VSX registers or in general purpose registers in 64-bit mode. Add splitters if GPRs were used. For AND, add clobber of CCmode to allow use of ANDI on GPRs. Rewrite nor to use the canonical RTL encoding. (vsx_and3_32bit): Likewise. (vsx_and3_64bit): Likewise. (vsx_ior3): Likewise. (vsx_ior3_32bit): Likewise. (vsx_ior3_64bit): Likewise. (vsx_xor3): Likewise. (vsx_xor3_32bit): Likewise. (vsx_xor3_64bit): Likewise. (vsx_one_cmpl2): Likewise. (vsx_one_cmpl2_32bit): Likewise. (vsx_one_cmpl2_64bit): Likewise. (vsx_nor3): Likewise. (vsx_nor3_32bit): Likewise. (vsx_nor3_64bit): Likewise. (vsx_andc3): Likewise. (vsx_andc3_32bit): Likewise. (vsx_andc3_64bit): Likewise. (vsx_eqv3_32bit): Add support for power8 xxleqv, xxlnand, and xxlorc instructions. (vsx_eqv3_64bit): Likewise. (vsx_nand3_32bit): Likewise. (vsx_nand3_64bit): Likewise. (vsx_orc3_32bit): Likewise. (vsx_orc3_64bit): Likewise. * config/rs6000/rs6000.h (VLOGICAL_REGNO_P): Update comment. * config/rs6000/altivec.md (UNSPEC_VGBBD): Add power8 vgbbd instruction. (p8_vmrgew): Add power8 vmrgew and vmrgow instructions. (p8_vmrgow): Likewise. (altivec_and3): Add clobber of CCmode to allow AND using GPRs to be split under VSX. (p8v_clz2): Add power8 count leading zero support. (p8v_popcount2): Add power8 population count support. (p8v_vgbbd): Add power8 gather bits by bytes by doubleword support. * config/rs6000/rs6000.md (eqv3): Add support for powerp eqv instruction. * config/rs6000/altivec.h (vec_eqv): Add defines to export power8 builtin functions. (vec_nand): Likewise. (vec_vclz): Likewise. (vec_vclzb): Likewise. (vec_vclzd): Likewise. (vec_vclzh): Likewise. (vec_vclzw): Likewise. (vec_vgbbd): Likewise. (vec_vmrgew): Likewise. (vec_vmrgow): Likewise. (vec_vpopcnt): Likewise. (vec_vpopcntb): Likewise. (vec_vpopcntd): Likewise. (vec_vpopcnth): Likewise. (vec_vpopcntw): Likewise. Backport from trunk 2013-05-29 Michael Meissner Pat Haugen Peter Bergner * config/rs6000/vector.md (VEC_I): Add support for new power8 V2DI instructions. (VEC_A): Likewise. (VEC_C): Likewise. (vrotl3): Likewise. (vashl3): Likewise. (vlshr3): Likewise. (vashr3): Likewise. * config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add support for power8 V2DI builtins. * config/rs6000/rs6000-builtin.def (abs_v2di): Add support for power8 V2DI builtins. (vupkhsw): Likewise. (vupklsw): Likewise. (vaddudm): Likewise. (vminsd): Likewise. (vmaxsd): Likewise. (vminud): Likewise. (vmaxud): Likewise. (vpkudum): Likewise. (vpksdss): Likewise. (vpkudus): Likewise. (vpksdus): Likewise. (vrld): Likewise. (vsld): Likewise. (vsrd): Likewise. (vsrad): Likewise. (vsubudm): Likewise. (vcmpequd): Likewise. (vcmpgtsd): Likewise. (vcmpgtud): Likewise. (vcmpequd_p): Likewise. (vcmpgtsd_p): Likewise. (vcmpgtud_p): Likewise. (vupkhsw): Likewise. (vupklsw): Likewise. (vaddudm): Likewise. (vmaxsd): Likewise. (vmaxud): Likewise. (vminsd): Likewise. (vminud): Likewise. (vpksdss): Likewise. (vpksdus): Likewise. (vpkudum): Likewise. (vpkudus): Likewise. (vrld): Likewise. (vsld): Likewise. (vsrad): Likewise. (vsrd): Likewise. (vsubudm): Likewise. * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Add support for power8 V2DI instructions. * config/rs6000/altivec.md (UNSPEC_VPKUHUM): Add support for power8 V2DI instructions. Combine pack and unpack insns to use an iterator for each mode. Check whether a particular mode supports Altivec instructions instead of just checking TARGET_ALTIVEC. (UNSPEC_VPKUWUM): Likewise. (UNSPEC_VPKSHSS): Likewise. (UNSPEC_VPKSWSS): Likewise. (UNSPEC_VPKUHUS): Likewise. (UNSPEC_VPKSHUS): Likewise. (UNSPEC_VPKUWUS): Likewise. (UNSPEC_VPKSWUS): Likewise. (UNSPEC_VPACK_SIGN_SIGN_SAT): Likewise. (UNSPEC_VPACK_SIGN_UNS_SAT): Likewise. (UNSPEC_VPACK_UNS_UNS_SAT): Likewise. (UNSPEC_VPACK_UNS_UNS_MOD): Likewise. (UNSPEC_VUPKHSB): Likewise. (UNSPEC_VUNPACK_HI_SIGN): Likewise. (UNSPEC_VUNPACK_LO_SIGN): Likewise. (UNSPEC_VUPKHSH): Likewise. (UNSPEC_VUPKLSB): Likewise. (UNSPEC_VUPKLSH): Likewise. (VI2): Likewise. (VI_char): Likewise. (VI_scalar): Likewise. (VI_unit): Likewise. (VP): Likewise. (VP_small): Likewise. (VP_small_lc): Likewise. (VU_char): Likewise. (add3): Likewise. (altivec_vaddcuw): Likewise. (altivec_vaddus): Likewise. (altivec_vaddss): Likewise. (sub3): Likewise. (altivec_vsubcuw): Likewise. (altivec_vsubus): Likewise. (altivec_vsubss): Likewise. (altivec_vavgs): Likewise. (altivec_vcmpbfp): Likewise. (altivec_eq): Likewise. (altivec_gt): Likewise. (altivec_gtu): Likewise. (umax3): Likewise. (smax3): Likewise. (umin3): Likewise. (smin3): Likewise. (altivec_vpkuhum): Likewise. (altivec_vpkuwum): Likewise. (altivec_vpkshss): Likewise. (altivec_vpkswss): Likewise. (altivec_vpkuhus): Likewise. (altivec_vpkshus): Likewise. (altivec_vpkuwus): Likewise. (altivec_vpkswus): Likewise. (altivec_vpksss): Likewise. (altivec_vpksus): Likewise. (altivec_vpkuus): Likewise. (altivec_vpkuum): Likewise. (altivec_vrl): Likewise. (altivec_vsl): Likewise. (altivec_vsr): Likewise. (altivec_vsra): Likewise. (altivec_vsldoi_): Likewise. (altivec_vupkhsb): Likewise. (altivec_vupkhs): Likewise. (altivec_vupkls): Likewise. (altivec_vupkhsh): Likewise. (altivec_vupklsb): Likewise. (altivec_vupklsh): Likewise. (altivec_vcmpequ_p): Likewise. (altivec_vcmpgts_p): Likewise. (altivec_vcmpgtu_p): Likewise. (abs2): Likewise. (vec_unpacks_hi_v16qi): Likewise. (vec_unpacks_hi_v8hi): Likewise. (vec_unpacks_lo_v16qi): Likewise. (vec_unpacks_hi_): Likewise. (vec_unpacks_lo_v8hi): Likewise. (vec_unpacks_lo_): Likewise. (vec_pack_trunc_v8h): Likewise. (vec_pack_trunc_v4si): Likewise. (vec_pack_trunc_): Likewise. * config/rs6000/altivec.h (vec_vaddudm): Add defines for power8 V2DI builtins. (vec_vmaxsd): Likewise. (vec_vmaxud): Likewise. (vec_vminsd): Likewise. (vec_vminud): Likewise. (vec_vpksdss): Likewise. (vec_vpksdus): Likewise. (vec_vpkudum): Likewise. (vec_vpkudus): Likewise. (vec_vrld): Likewise. (vec_vsld): Likewise. (vec_vsrad): Likewise. (vec_vsrd): Likewise. (vec_vsubudm): Likewise. (vec_vupkhsw): Likewise. (vec_vupklsw): Likewise. 2013-05-22 Michael Meissner Pat Haugen Peter Bergner * doc/extend.texi (PowerPC AltiVec/VSX Built-in Functions): Add documentation for the power8 crypto builtins. * config/rs6000/t-rs6000 (MD_INCLUDES): Add crypto.md. * config/rs6000/rs6000-builtin.def (BU_P8V_AV_1): Add support macros for defining power8 builtin functions. (BU_P8V_AV_2): Likewise. (BU_P8V_AV_P): Likewise. (BU_P8V_VSX_1): Likewise. (BU_P8V_OVERLOAD_1): Likewise. (BU_P8V_OVERLOAD_2): Likewise. (BU_CRYPTO_1): Likewise. (BU_CRYPTO_2): Likewise. (BU_CRYPTO_3): Likewise. (BU_CRYPTO_OVERLOAD_1): Likewise. (BU_CRYPTO_OVERLOAD_2): Likewise. (XSCVSPDP): Fix typo, point to the correct instruction. (VCIPHER): Add power8 crypto builtins. (VCIPHERLAST): Likewise. (VNCIPHER): Likewise. (VNCIPHERLAST): Likewise. (VPMSUMB): Likewise. (VPMSUMH): Likewise. (VPMSUMW): Likewise. (VPERMXOR_V2DI): Likewise. (VPERMXOR_V4SI: Likewise. (VPERMXOR_V8HI: Likewise. (VPERMXOR_V16QI: Likewise. (VSHASIGMAW): Likewise. (VSHASIGMAD): Likewise. (VPMSUM): Likewise. (VPERMXOR): Likewise. (VSHASIGMA): Likewise. * config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define __CRYPTO__ if the crypto instructions are available. (altivec_overloaded_builtins): Add support for overloaded power8 builtins. * config/rs6000/rs6000.c (rs6000_expand_ternop_builtin): Add support for power8 crypto builtins. (builtin_function_type): Likewise. (altivec_init_builtins): Add support for builtins that take vector long long (V2DI) arguments. * config/rs6000/crypto.md: New file, define power8 crypto instructions. 2013-05-22 Michael Meissner Pat Haugen Peter Bergner * doc/invoke.texi (Option Summary): Add power8 options. (RS/6000 and PowerPC Options): Likewise. * doc/md.texi (PowerPC and IBM RS6000 constraints): Update to use constraints.md instead of rs6000.h. Reorder w* constraints. Add wm, wn, wr documentation. * gcc/config/rs6000/constraints.md (wm): New constraint for VSX registers if direct move instructions are enabled. (wn): New constraint for no registers. (wq): New constraint for quad word even GPR registers. (wr): New constraint if 64-bit instructions are enabled. (wv): New constraint if power8 vector instructions are enabled. (wQ): New constraint for quad word memory locations. * gcc/config/rs6000/predicates.md (const_0_to_15_operand): New constraint for 0..15 for crypto instructions. (gpc_reg_operand): If VSX allow registers in VSX registers as well as GPR and floating point registers. (int_reg_operand): New predicate to match only GPR registers. (base_reg_operand): New predicate to match base registers. (quad_int_reg_operand): New predicate to match even GPR registers for quad memory operations. (vsx_reg_or_cint_operand): New predicate to allow vector logical operations in both GPR and VSX registers. (quad_memory_operand): New predicate for quad memory operations. (reg_or_indexed_operand): New predicate for direct move support. * gcc/config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED): Inherit from ISA_2_4_MASKS, not ISA_2_2_MASKS. (ISA_2_7_MASKS_SERVER): New mask for ISA 2.07 (i.e. power8). (POWERPC_MASKS): Add power8 options. (power8 cpu): Use ISA_2_7_MASKS_SERVER instead of specifying the various options. * gcc/config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Define _ARCH_PWR8 and __POWER8_VECTOR__ for power8. * gcc/config/rs6000/rs6000.opt (-mvsx-timode): Add documentation. (-mpower8-fusion): New power8 options. (-mpower8-fusion-sign): Likewise. (-mpower8-vector): Likewise. (-mcrypto): Likewise. (-mdirect-move): Likewise. (-mquad-memory): Likewise. * gcc/config/rs6000/rs6000.c (power8_cost): Initial definition for power8. (rs6000_hard_regno_mode_ok): Make PTImode only match even GPR registers. (rs6000_debug_reg_print): Print the base register class if -mdebug=reg. (rs6000_debug_vector_unit): Add p8_vector. (rs6000_debug_reg_global): If -mdebug=reg, print power8 constraint definitions. Also print fusion state. (rs6000_init_hard_regno_mode_ok): Set up power8 constraints. (rs6000_builtin_mask_calculate): Add power8 builtin support. (rs6000_option_override_internal): Add support for power8. (rs6000_common_init_builtins): Add debugging for skipped builtins if -mdebug=builtin. (rs6000_adjust_cost): Add power8 support. (rs6000_issue_rate): Likewise. (insn_must_be_first_in_group): Likewise. (insn_must_be_last_in_group): Likewise. (force_new_group): Likewise. (rs6000_register_move_cost): Likewise. (rs6000_opt_masks): Likewise. * config/rs6000/rs6000.h (ASM_CPU_POWER8_SPEC): If we don't have a power8 capable assembler, default to power7 options. (TARGET_DIRECT_MOVE): Likewise. (TARGET_CRYPTO): Likewise. (TARGET_P8_VECTOR): Likewise. (VECTOR_UNIT_P8_VECTOR_P): Define power8 vector support. (VECTOR_UNIT_VSX_OR_P8_VECTOR_P): Likewise. (VECTOR_MEM_P8_VECTOR_P): Likewise. (VECTOR_MEM_VSX_OR_P8_VECTOR_P): Likewise. (VECTOR_MEM_ALTIVEC_OR_VSX_P): Likewise. (TARGET_XSCVDPSPN): Likewise. (TARGET_XSCVSPDPN): Likewsie. (TARGET_SYNC_HI_QI): Likewise. (TARGET_SYNC_TI): Likewise. (MASK_CRYPTO): Likewise. (MASK_DIRECT_MOVE): Likewise. (MASK_P8_FUSION): Likewise. (MASK_P8_VECTOR): Likewise. (REG_ALLOC_ORDER): Move fr13 to be lower in priority so that the TFmode temporary used by some of the direct move instructions to get two FP temporary registers does not force creation of a stack frame. (VLOGICAL_REGNO_P): Allow vector logical operations in GPRs. (MODES_TIEABLE_P): Move the VSX tests above the Altivec tests so that any VSX registers are tieable, even if they are also an Altivec vector mode. (r6000_reg_class_enum): Add wm, wr, wv constraints. (RS6000_BTM_P8_VECTOR): Power8 builtin support. (RS6000_BTM_CRYPTO): Likewise. (RS6000_BTM_COMMON): Likewise. * config/rs6000/rs6000.md (cpu attribute): Add power8. * config/rs6000/rs6000-opts.h (PROCESSOR_POWER8): Likewise. (enum rs6000_vector): Add power8 vector support. Backport from mainline 2013-03-20 Pat Haugen * config/rs6000/predicates.md (indexed_address, update_address_mem update_indexed_address_mem): New predicates. * config/rs6000/vsx.md (vsx_extract__zero): Set correct "type" attribute for load/store instructions. * config/rs6000/dfp.md (movsd_store): Likewise. (movsd_load): Likewise. * config/rs6000/rs6000.md (zero_extenddi2_internal1): Likewise. (unnamed HI->DI extend define_insn): Likewise. (unnamed SI->DI extend define_insn): Likewise. (unnamed QI->SI extend define_insn): Likewise. (unnamed QI->HI extend define_insn): Likewise. (unnamed HI->SI extend define_insn): Likewise. (unnamed HI->SI extend define_insn): Likewise. (extendsfdf2_fpr): Likewise. (movsi_internal1): Likewise. (movsi_internal1_single): Likewise. (movhi_internal): Likewise. (movqi_internal): Likewise. (movcc_internal1): Correct mnemonic for stw insn. Set correct "type" attribute for load/store instructions. (mov_hardfloat): Set correct "type" attribute for load/store instructions. (mov_softfloat): Likewise. (mov_hardfloat32): Likewise. (mov_hardfloat64): Likewise. (mov_softfloat64): Likewise. (movdi_internal32): Likewise. (movdi_internal64): Likewise. (probe_stack_): Likewise. Backport from mainline 2013-03-20 Michael Meissner * config/rs6000/vector.md (VEC_R): Add 32-bit integer, binary floating point, and decimal floating point to reload iterator. * config/rs6000/constraints.md (wl constraint): New constraints to return FLOAT_REGS if certain options are used to reduce the number of separate patterns that exist in the file. (wx constraint): Likewise. (wz constraint): Likewise. * config/rs6000/rs6000.c (rs6000_debug_reg_global): If -mdebug=reg, print wg, wl, wx, and wz constraints. (rs6000_init_hard_regno_mode_ok): Initialize new constraints. Initialize the reload functions for 64-bit binary/decimal floating point types. (reg_offset_addressing_ok_p): If we are on a power7 or later, use LFIWZX and STFIWX to load/store 32-bit decimal types, and don't create the buffer on the stack to overcome not having a 32-bit load and store. (rs6000_emit_move): Likewise. (rs6000_secondary_memory_needed_rtx): Likewise. (rs6000_alloc_sdmode_stack_slot): Likewise. (rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f via xxlxor, just like DFmode 0.0. * config/rs6000/rs6000.h (TARGET_NO_SDMODE_STACK): New macro) (define as 1 if we are running on a power7 or newer. (enum r6000_reg_class_enum): Add new constraints. * config/rs6000/dfp.md (movsd): Delete, combine with binary floating point moves in rs6000.md. Combine power6x (mfpgpr) moves with other moves by using conditional constraits (wg). Use LFIWZX and STFIWX for loading SDmode on power7. Use xxlxor to create 0.0f. (movsd splitter): Likewise. (movsd_hardfloat): Likewise. (movsd_softfloat): Likewise. * config/rs6000/rs6000.md (FMOVE32): New iterators to combine binary and decimal floating point moves. (fmove_ok): New attributes to combine binary and decimal floating point moves, and to combine power6x (mfpgpr) moves along normal floating moves. (real_value_to_target): Likewise. (f32_lr): Likewise. (f32_lm): Likewise. (f32_li): Likewise. (f32_sr): Likewise. (f32_sm): Likewise. (f32_si): Likewise. (movsf): Combine binary and decimal floating point moves. Combine power6x (mfpgpr) moves with other moves by using conditional constraits (wg). Use LFIWZX and STFIWX for loading SDmode on power7. (mov for SFmode/SDmode); Likewise. (SFmode/SDmode splitters): Likewise. (movsf_hardfloat): Likewise. (mov_hardfloat for SFmode/SDmode): Likewise. (movsf_softfloat): Likewise. (mov_softfloat for SFmode/SDmode): Likewise. * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wl) (wx and wz constraints. * config/rs6000/constraints.md (wg constraint): New constraint to return FLOAT_REGS if -mmfpgpr (power6x) was used. * config/rs6000/rs6000.h (enum r6000_reg_class_enum): Add wg constraint. * config/rs6000/rs6000.c (rs6000_debug_reg_global): If -mdebug=reg, print wg, wl, wx, and wz constraints. (rs6000_init_hard_regno_mode_ok): Initialize new constraints. Initialize the reload functions for 64-bit binary/decimal floating point types. (reg_offset_addressing_ok_p): If we are on a power7 or later, use LFIWZX and STFIWX to load/store 32-bit decimal types, and don't create the buffer on the stack to overcome not having a 32-bit load and store. (rs6000_emit_move): Likewise. (rs6000_secondary_memory_needed_rtx): Likewise. (rs6000_alloc_sdmode_stack_slot): Likewise. (rs6000_preferred_reload_class): On VSX, we can create SFmode 0.0f via xxlxor, just like DFmode 0.0. * config/rs6000/dfp.md (movdd): Delete, combine with binary floating point moves in rs6000.md. Combine power6x (mfpgpr) moves with other moves by using conditional constraits (wg). Use LFIWZX and STFIWX for loading SDmode on power7. (movdd splitters): Likewise. (movdd_hardfloat32): Likewise. (movdd_softfloat32): Likewise. (movdd_hardfloat64_mfpgpr): Likewise. (movdd_hardfloat64): Likewise. (movdd_softfloat64): Likewise. * config/rs6000/rs6000.md (FMOVE64): New iterators to combine 64-bit binary and decimal floating point moves. (FMOVE64X): Likewise. (movdf): Combine 64-bit binary and decimal floating point moves. Combine power6x (mfpgpr) moves with other moves by using conditional constraits (wg). (mov for DFmode/DDmode): Likewise. (DFmode/DDmode splitters): Likewise. (movdf_hardfloat32): Likewise. (mov_hardfloat32 for DFmode/DDmode): Likewise. (movdf_softfloat32): Likewise. (movdf_hardfloat64_mfpgpr): Likewise. (movdf_hardfloat64): Likewise. (mov_hardfloat64 for DFmode/DDmode): Likewise. (movdf_softfloat64): Likewise. (mov_softfloat64 for DFmode/DDmode): Likewise. (reload__load): Move to later in the file so they aren't in the middle of the floating point move insns. (reload__store): Likewise. * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wg constraint. * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print out wg constraint if -mdebug=reg. (rs6000_initi_hard_regno_mode_ok): Enable wg constraint if -mfpgpr. Enable using dd reload support if needed. * config/rs6000/dfp.md (movtd): Delete, combine with 128-bit binary and decimal floating point moves in rs6000.md. (movtd_internal): Likewise. * config/rs6000/rs6000.md (FMOVE128): Combine 128-bit binary and decimal floating point moves. (movtf): Likewise. (movtf_internal): Likewise. (mov_internal, TDmode/TFmode): Likewise. (movtf_softfloat): Likewise. (mov_softfloat, TDmode/TFmode): Likewise. * config/rs6000/rs6000.md (movdi_mfpgpr): Delete, combine with movdi_internal64, using wg constraint for move direct operations. (movdi_internal64): Likewise. * config/rs6000/rs6000.c (rs6000_debug_reg_global): Print MODES_TIEABLE_P for selected modes. Print the numerical value of the various virtual registers. Use GPR/FPR first/last values) (instead of hard coding the register numbers. Print which modes have reload functions registered. (rs6000_option_override_internal): If -mdebug=reg, trace the options settings before/after setting cpu, target and subtarget settings. (rs6000_secondary_reload_trace): Improve the RTL dump for -mdebug=addr and for secondary reload failures in rs6000_secondary_reload_inner. (rs6000_secondary_reload_fail): Likewise. (rs6000_secondary_reload_inner): Likewise. * config/rs6000/rs6000.md (FIRST_GPR_REGNO): Add convenience macros for first/last GPR and FPR registers. (LAST_GPR_REGNO): Likewise. (FIRST_FPR_REGNO): Likewise. (LAST_FPR_REGNO): Likewise. * config/rs6000/vector.md (mul3): Use the combined macro VECTOR_UNIT_ALTIVEC_OR_VSX_P instead of separate calls to VECTOR_UNIT_ALTIVEC_P and VECTOR_UNIT_VSX_P. (vcond): Likewise. (vcondu): Likewise. (vector_gtu): Likewise. (vector_gte): Likewise. (xor3): Don't allow logical operations on TImode in 32-bit to prevent the compiler from converting DImode operations to TImode. (ior3): Likewise. (and3): Likewise. (one_cmpl2): Likewise. (nor3): Likewise. (andc3): Likewise. * config/rs6000/constraints.md (wt constraint): New constraint that returns VSX_REGS if TImode is allowed in VSX registers. * config/rs6000/predicates.md (easy_fp_constant): 0.0f is an easy constant under VSX. * config/rs6000/rs6000-modes.def (PTImode): Define, PTImode is similar to TImode, but it is restricted to being in the GPRs. * config/rs6000/rs6000.opt (-mvsx-timode): New switch to allow TImode to occupy a single VSX register. * config/rs6000/rs6000-cpus.def (ISA_2_6_MASKS_SERVER): Default to -mvsx-timode for power7/power8. (power7 cpu): Likewise. (power8 cpu): Likewise. * config/rs6000/rs6000.c (rs6000_hard_regno_nregs_internal): Make sure that TFmode/TDmode take up two registers if they are ever allowed in the upper VSX registers. (rs6000_hard_regno_mode_ok): If -mvsx-timode, allow TImode in VSX registers. (rs6000_init_hard_regno_mode_ok): Likewise. (rs6000_debug_reg_global): Add debugging for PTImode and wt constraint. Print if LRA is turned on. (rs6000_option_override_internal): Give an error if -mvsx-timode and VSX is not enabled. (invalid_e500_subreg): Handle PTImode, restricting it to GPRs. If -mvsx-timode, restrict TImode to reg+reg addressing, and PTImode to reg+offset addressing. Use PTImode when checking offset addresses for validity. (reg_offset_addressing_ok_p): Likewise. (rs6000_legitimate_offset_address_p): Likewise. (rs6000_legitimize_address): Likewise. (rs6000_legitimize_reload_address): Likewise. (rs6000_legitimate_address_p): Likewise. (rs6000_eliminate_indexed_memrefs): Likewise. (rs6000_emit_move): Likewise. (rs6000_secondary_reload): Likewise. (rs6000_secondary_reload_inner): Handle PTImode. Allow 64-bit reloads to fpr registers to continue to use reg+offset addressing) (but 64-bit reloads to altivec registers need reg+reg addressing. Drop test for PRE_MODIFY, since VSX loads/stores no longer support it. Treat LO_SUM like a PLUS operation. (rs6000_secondary_reload_class): If type is 64-bit, prefer to use FLOAT_REGS instead of VSX_RGS to allow use of reg+offset addressing. (rs6000_cannot_change_mode_class): Do not allow TImode in VSX registers to share a register with a smaller sized type, since VSX puts scalars in the upper 64-bits. (print_operand): Add support for PTImode. (rs6000_register_move_cost): Use VECTOR_MEM_VSX_P instead of VECTOR_UNIT_VSX_P to catch types that can be loaded in VSX registers, but don't have arithmetic support. (rs6000_memory_move_cost): Add test for VSX. (rs6000_opt_masks): Add -mvsx-timode. * config/rs6000/vsx.md (VSm): Change to use 64-bit aligned moves for TImode. (VSs): Likewise. (VSr): Use wt constraint for TImode. (VSv): Drop TImode support. (vsx_movti): Delete, replace with versions for 32-bit and 64-bit. (vsx_movti_64bit): Likewise. (vsx_movti_32bit): Likewise. (vec_store_): Use VSX iterator instead of vector iterator. (vsx_and3): Delete use of '?' constraint on inputs, just put one '?' on the appropriate output constraint. Do not allow TImode logical operations on 32-bit systems. (vsx_ior3): Likewise. (vsx_xor3): Likewise. (vsx_one_cmpl2): Likewise. (vsx_nor3): Likewise. (vsx_andc3): Likewise. (vsx_concat_): Likewise. (vsx_xxpermdi_): Fix thinko for non V2DF/V2DI modes. * config/rs6000/rs6000.h (MASK_VSX_TIMODE): Map from OPTION_MASK_VSX_TIMODE. (enum rs6000_reg_class_enum): Add RS6000_CONSTRAINT_wt. (STACK_SAVEAREA_MODE): Use PTImode instead of TImode. * config/rs6000/rs6000.md (INT mode attribute): Add PTImode. (TI2 iterator): New iterator for TImode, PTImode. (wd mode attribute): Add values for vector types. (movti_string): Replace TI move operations with operations for TImode and PTImode. Add support for TImode being allowed in VSX registers. (mov_string, TImode/PTImode): Likewise. (movti_ppc64): Likewise. (mov_ppc64, TImode/PTImode): Likewise. (TI mode splitters): Likewise. * doc/md.texi (PowerPC and IBM RS6000 constraints): Document wt constraint. 2014-04-04 Richard Biener * tree-ssanames.c (make_ssa_name_fn): Fix assert. 2014-04-02 Andreas Krebbel * config/s390/s390.c (s390_expand_insv): Use GET_MODE_BITSIZE. 2014-04-01 Richard Biener * gimple.h (struct gimple_statement_base): Align subcode to 16 bits. 2014-04-01 Sebastian Huber * doc/invoke.texi (mapp-regs): Clarify. 2014-03-31 H.J. Lu PR rtl-optimization/60700 Backport from mainline 2013-07-30 Zhenqiang Chen PR rtl-optimization/57637 * function.c (move_insn_for_shrink_wrap): Also check the GEN set of the LIVE problem for the liveness analysis if it exists, otherwise give up. 2014-03-30 Kaz Kojima Backport from mainline 2014-03-19 Kaz Kojima PR target/60039 * config/sh/sh.md (udivsi3_i1): Clobber R1 register. 2014-03-26 Martin Jambor PR ipa/60419 * ipa.c (symtab_remove_unreachable_nodes): Clear thunk and alias flags of nodes in the border. 2014-03-26 Eric Botcazou PR rtl-optimization/60452 * rtlanal.c (rtx_addr_can_trap_p_1): Fix head comment. : Return 1 for invalid offsets from the frame pointer. 2014-03-24 Richard Biener PR tree-optimization/60429 * tree-ssa-structalias.c (get_constraint_for_ptr_offset): Remove duplicated line. 2014-03-23 Eric Botcazou PR rtl-optimization/60601 * bb-reorder.c (fix_up_fall_thru_edges): Test EDGE_FALLTHRU everywhere. * gcc.c (eval_spec_function): Initialize save_growing_value. 2014-03-20 Jakub Jelinek PR target/60568 * config/i386/i386.c (x86_output_mi_thunk): Surround UNSPEC_GOT into CONST, put pic register as first operand of PLUS. Use gen_const_mem for both 32-bit and 64-bit PIC got loads. 2014-03-20 Eric Botcazou * config/sparc/sparc.c (sparc_do_work_around_errata): Implement work around for store forwarding issue in the FPU on the UT699. * config/sparc/sparc.md (in_branch_delay): Return false for single FP loads and operations if -mfix-ut699 is specified. (divtf3_hq): Tweak attribute. (sqrttf2_hq): Likewise. 2014-03-18 Kai Tietz PR rtl-optimization/56356 * sdbout.c (sdbout_parms): Verify that parms' incoming argument is valid. (sdbout_reg_parms): Likewise. 2014-03-18 Eric Botcazou * config/sparc/sparc.c (sparc_do_work_around_errata): Speed up and use proper constant for the store mode. 2014-03-17 Mikael Pettersson Committed by Bill Schmidt Backport from mainline: 2013-06-20 Joern Rennecke PR rtl-optimization/57425 PR rtl-optimization/57569 * alias.c (write_dependence_p): Remove parameters mem_mode and canon_mem_addr. Add parameters x_mode, x_addr and x_canonicalized. Changed all callers. (canon_anti_dependence): Get comments and semantics in sync. Add parameter mem_canonicalized. Changed all callers. * rtl.h (canon_anti_dependence): Update prototype. 2013-06-16 Joern Rennecke PR rtl-optimization/57425 PR rtl-optimization/57569 * alias.c (write_dependence_p): Add new parameters mem_mode, canon_mem_addr and mem_canonicalized. Change type of writep to bool. Changed all callers. (canon_anti_dependence): New function. * cse.c (check_dependence): Use canon_anti_dependence. * cselib.c (cselib_invalidate_mem): Likewise. * rtl.h (canon_anti_dependence): Declare. 2014-03-17 Richard Biener Backport from mainline 2014-03-11 Richard Biener PR tree-optimization/60429 PR tree-optimization/60485 * tree-ssa-structalias.c (set_union_with_increment): Properly take into account all fields that overlap the shifted vars. (do_sd_constraint): Likewise. (do_ds_constraint): Likewise. (get_constraint_for_ptr_offset): Likewise. 2014-03-15 Eric Botcazou * config/sparc/sparc-protos.h (tls_call_delay): Delete. (eligible_for_call_delay): New prototype. * config/sparc/sparc.c (tls_call_delay): Rename into... (eligible_for_call_delay): ...this. Return false if the instruction cannot be put in the delay slot of a branch. (eligible_for_restore_insn): Simplify. (eligible_for_return_delay): Return false if the instruction cannot be put in the delay slot of a branch and simplify. (eligible_for_sibcall_delay): Return false if the instruction cannot be put in the delay slot of a branch. * config/sparc/sparc.md (fix_ut699): New attribute. (tls_call_delay): Delete. (in_call_delay): Reimplement. (eligible_for_sibcall_delay): Rename into... (in_sibcall_delay): ...this. (eligible_for_return_delay): Rename into... (in_return_delay): ...this. (in_branch_delay): Reimplement. (in_uncond_branch_delay): Delete. (in_annul_branch_delay): Delete. 2014-03-14 Georg-Johann Lay Backport from 2014-03-14 trunk r208562. PR target/59396 * config/avr/avr.c (avr_set_current_function): Pass function name through default_strip_name_encoding before sanity checking instead of skipping the first char of the assembler name. 2014-03-13 Georg-Johann Lay Backport from 2014-03-13 trunk r208532. PR target/60486 * config/avr/avr.c (avr_out_plus): Swap cc_plus and cc_minus in calls of avr_out_plus_1. 2014-03-13 Joey Ye Backport from mainline 2014-03-12 Thomas Preud'homme PR tree-optimization/60454 * tree-ssa-math-opts.c (find_bswap_1): Fix bswap detection. 2014-03-06 Matthias Klose * Makefile.in (s-mlib): Only pass MULTIARCH_DIRNAME if MULTILIB_OSDIRNAMES is not defined. 2014-03-06 Jakub Jelinek PR tree-optimization/60276 * tree-vect-data-refs.c (vect_analyze_data_ref_dependence): Avoid a -Wsign-compare warning. * Makefile.in (tree-ssa-uninit.o): Depend on $(PARAMS_H). Backport from mainline 2014-02-21 Jakub Jelinek PR tree-optimization/56490 * params.def (PARAM_UNINIT_CONTROL_DEP_ATTEMPTS): New param. * tree-ssa-uninit.c: Include params.h. (compute_control_dep_chain): Add num_calls argument, return false if it exceed PARAM_UNINIT_CONTROL_DEP_ATTEMPTS param, pass num_calls to recursive call. (find_predicates): Change dep_chain into normal array, add num_calls variable and adjust compute_control_dep_chain caller. (find_def_preds): Likewise. 2014-02-13 Jakub Jelinek PR target/43546 * expr.c (compress_float_constant): If x is a hard register, extend into a pseudo and then move to x. 2014-02-11 Richard Henderson Jakub Jelinek PR debug/59776 * tree-sra.c (load_assign_lhs_subreplacements): Add VIEW_CONVERT_EXPR around drhs if type conversion to lacc->type is not useless. 2014-02-08 Jakub Jelinek PR ipa/60026 * ipa-cp.c (determine_versionability): Fail at -O0 or __attribute__((optimize (0))) or -fno-ipa-cp functions. * tree-sra.c (ipa_sra_preliminary_function_checks): Similarly. 2014-02-06 Jakub Jelinek PR target/60062 * tree.h (opts_for_fn): New inline function. (opt_for_fn): Define. * config/i386/i386.c (ix86_function_regparm): Use opt_for_fn (decl, optimize) instead of optimize. 2014-02-05 Jakub Jelinek PR middle-end/57499 * tree-eh.c (cleanup_empty_eh): Bail out on totally empty bb with no successors. 2014-03-04 Richard Biener PR tree-optimization/60382 * tree-vect-loop.c (vect_is_simple_reduction_1): Do not consider dead PHIs a reduction. 2014-02-25 Richard Biener Backport from mainline 2014-02-21 Richard Biener PR tree-optimization/60276 * tree-vectorizer.h (struct _stmt_vec_info): Add min_neg_dist field. (STMT_VINFO_MIN_NEG_DIST): New macro. * tree-vect-data-refs.c (vect_analyze_data_ref_dependence): Record STMT_VINFO_MIN_NEG_DIST. * tree-vect-stmts.c (vectorizable_load): Verify if assumptions made for negative dependence distances still hold. 2014-02-25 Richard Biener Backport from mainline 2014-02-21 Richard Biener PR middle-end/60291 * tree-ssa-live.c (mark_all_vars_used_1): Do not walk DECL_INITIAL for globals not in the current function context. 2014-02-20 Richard Biener PR middle-end/60221 * tree-eh.c (execute_cleanup_eh_1): Also cleanup empty EH regions at -O0. 2014-02-14 Richard Biener PR tree-optimization/60183 * tree-ssa-phiprop.c (propagate_with_phi): Avoid speculating loads. (tree_ssa_phiprop): Calculate and free post-dominators. 2014-02-25 Kyrylo Tkachov PR target/55426 * config/arm/arm.h (CANNOT_CHANGE_MODE_CLASS): Allow 128 to 64-bit conversions. 2014-02-24 John David Anglin * config/pa/pa.c (pa_output_move_double): Don't valididate when adjusting offsetable addresses. 2014-02-23 David Holsgrove * config/microblaze/microblaze.md: Correct ashrsi_reg / lshrsi_reg names 2014-02-23 Edgar E. Iglesias * config/microblaze/microblaze.h: Remove SECONDARY_MEMORY_NEEDED definition. 2014-02-23 David Holsgrove * /config/microblaze/microblaze.c: Add microblaze_asm_output_mi_thunk and define TARGET_ASM_OUTPUT_MI_THUNK and TARGET_ASM_CAN_OUTPUT_MI_THUNK. 2014-02-23 David Holsgrove * config/microblaze/predicates.md: Add cmp_op predicate. * config/microblaze/microblaze.md: Add branch_compare instruction which uses cmp_op predicate and emits cmp insn before branch. * config/microblaze/microblaze.c (microblaze_emit_compare): Rename to microblaze_expand_conditional_branch and consolidate logic. (microblaze_expand_conditional_branch): emit branch_compare insn instead of handling cmp op separate from branch insn. 2014-02-21 Martin Jambor PR ipa/55260 * ipa-cp.c (cgraph_edge_brings_all_agg_vals_for_node): Uce correct info when checking whether lattices are bottom. 2014-02-21 Jakub Jelinek * config/i386/i386.c (ix86_expand_vec_perm): Use V8SImode mode for mask of V8SFmode permutation. 2014-02-20 Richard Henderson PR c++/60272 * builtins.c (expand_builtin_atomic_compare_exchange): Conditionalize on failure the store back into EXPECT. Always make a new pseudo for OLDVAL. 2014-02-20 Jakub Jelinek PR target/57896 * config/i386/i386.c (expand_vec_perm_interleave2): Don't call gen_reg_rtx if d->testing_p. (expand_vec_perm_pshufb2, expand_vec_perm_even_odd_1, expand_vec_perm_broadcast_1): Return early if d->testing_p and we will certainly return true. 2014-02-20 Richard Biener * tree-cfg.c (replace_uses_by): Mark altered BBs before doing the substitution. 2014-02-19 H.J. Lu Backport from mainline 2014-02-19 H.J. Lu PR target/60207 * config/i386/i386.c (construct_container): Remove TFmode check for X86_64_INTEGER_CLASS. 2014-02-19 Uros Bizjak Backport from mainline 2014-02-19 Uros Bizjak PR target/59794 * config/i386/i386.c (type_natural_mode): Warn for ABI changes only when -Wpsabi is enabled. 2014-02-19 Terry Guo Backport from mainline 2014-02-08 Terry Guo * doc/invoke.texi: Document ARM -march=armv7e-m. 2014-02-18 Kai Tietz Backport from mainline 2014-02-18 Kai Tietz PR target/60193 * config/i386/i386.c (ix86_expand_prologue): Use rax register as displacement for restoring %r10, %rax. Additional fix wrong offset for restoring both-registers. 2014-02-18 Eric Botcazou * ipa-prop.c (compute_complex_ancestor_jump_func): Replace overzealous assertion with conditional return. 2014-02-18 Jakub Jelinek Uros Bizjak PR driver/60233 * config/i386/driver-i386.c (host_detect_local_cpu): If YMM state is not saved by the OS, also clear has_f16c. Move CPUID 0x80000001 handling before YMM state saving checking. 2014-02-14 Roland McGrath * configure.ac (HAVE_AS_IX86_UD2): New test for 'ud2' mnemonic. * configure: Regenerated. * config.in: Regenerated. * config/i386/i386.md (trap) [HAVE_AS_IX86_UD2]: Use the mnemonic instead of ASM_SHORT. 2014-02-13 Uros Bizjak Backport from mainline 2014-02-13 Uros Bizjak * config/i386/sse.md (xop_vmfrcz2): Generate const0 in operands[2], not operands[3]. 2014-02-13 Dominik Vogt * config/s390/s390.c (s390_asm_output_function_label): Fix crash caused by bad second argument to warning_at() with -mhotpatch and nested functions (e.g. with gfortran). 2014-02-12 H.J. Lu Backport from mainline 2014-02-12 H.J. Lu Uros Bizjak PR target/60151 * configure.ac (HAVE_AS_GOTOFF_IN_DATA): Pass --32 to GNU assembler. 2014-02-12 Eric Botcazou PR rtl-optimization/60116 * combine.c (try_combine): Also remove dangling REG_DEAD notes on the other_insn once the combination has been validated. 2014-02-10 Nagaraju Mekala * config/microblaze/microblaze.md: Add movsi4_rev insn pattern. * config/microblaze/predicates.md: Add reg_or_mem_operand predicate. 2014-02-10 Nagaraju Mekala * config/microblaze/microblaze.c: Extend mcpu version format 2014-02-10 David Holsgrove * config/microblaze/microblaze.h: Define SIZE_TYPE and PTRDIFF_TYPE. 2014-02-10 Richard Biener Backport from mainline 2014-01-30 Richard Biener PR tree-optimization/59903 * tree-vect-loop.c (vect_transform_loop): Guard multiple-types check properly. 2014-02-10 Richard Biener PR tree-optimization/60115 * tree-eh.c (tree_could_trap_p): Unify TARGET_MEM_REF and MEM_REF handling. Properly verify that the accesses are not out of the objects bound. 2014-02-05 James Greenhalgh Backport from mainline. 2014-02-05 James Greenhalgh PR target/59718 * doc/invoke.texi (-march): Clarify documentation for ARM. (-mtune): Likewise. (-mcpu): Likewise. 2014-02-04 John David Anglin PR target/59777 * config/pa/pa.c (legitimize_tls_address): Return original address if not passed a SYMBOL_REF rtx. (hppa_legitimize_address): Call legitimize_tls_address for all TLS addresses. (pa_emit_move_sequence): Simplify TLS source operands. (pa_legitimate_constant_p): Reject all TLS constants. * config/pa/pa.h (PA_SYMBOL_REF_TLS_P): Correct comment. (CONSTANT_ADDRESS_P): Reject TLS CONST addresses. 2014-02-04 Uros Bizjak Backport from mainline 2014-02-02 Uros Bizjak PR target/60017 * config/i386/i386.c (classify_argument): Fix handling of bit_offset when calculating size of integer atomic types. 2014-02-02 Uros Bizjak Backport from mainline 2014-01-30 Jakub Jelinek * config/i386/f16cintrin.h (_cvtsh_ss): Avoid -Wnarrowing warning. 2014-01-31 Richard Henderson PR middle-end/60004 * tree-eh.c (lower_try_finally_switch): Delay lowering finally block until after else_eh is processed. 2014-01-30 David Holsgrove Backport from mainline * config/microblaze/microblaze.md(cstoresf4, cbranchsf4): Replace comparison_operator with ordered_comparison_operator. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilegx/sync.md (atomic_fetch_sub): Fix negation and avoid clobbering a live register. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilegx/tilegx-c.c (tilegx_cpu_cpp_builtins): Define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_{1,2}. * config/tilegx/tilepro-c.c (tilepro_cpu_cpp_builtins): Define __GCC_HAVE_SYNC_COMPARE_AND_SWAP_{1,2,4,8}. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilegx/tilegx.c (tilegx_gen_bundles): Delete barrier insns before bundling. * config/tilegx/tilegx.md (tile_network_barrier): Update comment. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilegx/tilegx.c (tilegx_expand_builtin): Set PREFETCH_SCHEDULE_BARRIER_P to true for prefetches. * config/tilepro/tilepro.c (tilepro_expand_builtin): Ditto. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilepro/tilepro.md (ctzdi2): Use register_operand predicate. (clzdi2): Ditto. (ffsdi2): Ditto. 2014-01-25 Walter Lee Backport from mainline 2014-01-25 Walter Lee * config/tilegx/tilegx.c (tilegx_expand_to_rtl_hook): New. (TARGET_EXPAND_TO_RTL_HOOK): Define. 2014-01-24 H.J. Lu Backport from mainline 2014-01-23 H.J. Lu PR target/59929 * config/i386/i386.md (pushsf splitter): Get stack adjustment from push operand if code of push isn't PRE_DEC. 2014-01-23 David Holsgrove Backport from mainline. * config/microblaze/microblaze.md: Add trap insn and attribute 2014-01-23 Marek Polacek Backport from mainline 2013-10-21 Marek Polacek PR middle-end/58809 * fold-const.c (fold_range_test): Return 0 if the type is not an integral type. 2014-01-22 David Holsgrove * config/microblaze/microblaze.md: Correct bswaphi2 insn. 2014-01-22 Uros Bizjak Backport from mainline 2014-01-20 Uros Bizjak * config/i386/i386.c (ix86_avoid_lea_for_addr): Return false for SImode_address_operand operands, having only a REG argument. 2014-01-20 Jakub Jelinek PR target/59880 * config/i386/i386.c (ix86_avoid_lea_for_addr): Return false if operands[1] is a REG or ZERO_EXTEND of a REG. 2014-01-18 Uros Bizjak H.J. Lu PR target/59379 * config/i386/i386.md (*lea): Zero-extend return register to DImode for zero-extended addresses. 2014-01-21 Andrew Pinski Steve Ellcey PR target/59462 * config/mips/mips.c (mips_print_operand): Check operand mode instead of operator mode. 2014-01-21 Andrey Belevantsev Backport from mainline 2013-12-23 Andrey Belevantsev PR rtl-optimization/57422 * sel-sched.c (mark_unavailable_hard_regs): Fix typo when calling add_to_hard_reg_set. 2014-01-20 Jakub Jelinek PR middle-end/59860 * tree.h (fold_builtin_strcat): New prototype. * builtins.c (fold_builtin_strcat): No longer static. Add len argument, if non-NULL, don't call c_strlen. Optimize directly into __builtin_memcpy instead of __builtin_strcpy. (fold_builtin_2): Adjust fold_builtin_strcat caller. * gimple-fold.c (gimple_fold_builtin): Handle BUILT_IN_STRCAT. 2014-01-20 Richard Biener PR middle-end/59860 * builtins.c (fold_builtin_strcat): Remove case better handled by tree-ssa-strlen.c. 2014-01-19 John David Anglin * config/pa/pa.c (pa_attr_length_millicode_call): Correct length of long non-pic millicode calls. 2014-01-17 John David Anglin * config/pa/pa.c (pa_attr_length_indirect_call): Don't output a short call to $$dyncall when TARGET_LONG_CALLS is true. 2014-01-17 H.J. Lu Backport from mainline 2014-01-14 H.J. Lu PR target/59794 * config/i386/i386.c (type_natural_mode): Add a bool parameter to indicate if type is used for function return value. Warn ABI change if the vector mode isn't available for function return value. (ix86_function_arg_advance): Pass false to type_natural_mode. (ix86_function_arg): Likewise. (ix86_gimplify_va_arg): Likewise. (function_arg_32): Don't warn ABI change. (ix86_function_value): Pass true to type_natural_mode. (ix86_return_in_memory): Likewise. (ix86_struct_value_rtx): Removed. (TARGET_STRUCT_VALUE_RTX): Likewise. 2014-01-17 Charles Baylis Backport from mainline 2013-12-19 Charles Baylis PR target/59142 * config/arm/arm-ldmstm.ml: Use low_register_operand for Thumb patterns. * config/arm/ldmstm.md: Regenerate. 2013-12-19 Charles Baylis PR target/59142 * config/arm/predicates.md (arm_hard_general_register_operand): New predicate. (arm_hard_register_operand): Remove. * config/arm/arm-ldmstm.ml: Use arm_hard_general_register_operand for all patterns. * config/arm/ldmstm.md: Regenerate. 2013-12-19 Charles Baylis PR target/59142 * config/arm/predicates.md (vfp_hard_register_operand): New predicate. * config/arm/arm.md (vfp_pop_multiple_with_writeback): Use vfp_hard_register_operand. 2014-01-17 Kugan Vivekanandarajah Backport from mainline 2014-01-15 Matthew Gretton-Dann Kugan Vivekanandarajah PR target/59695 * config/aarch64/aarch64.c (aarch64_build_constant): Fix incorrect truncation. 2014-01-17 Terry Guo PR target/59826 * config/arm/arm.md (prefetch): Set insn type attribute to load1. 2014-01-16 Jakub Jelinek PR target/59839 * config/i386/i386.c (ix86_expand_builtin): If target doesn't satisfy operand 0 predicate for gathers, use a new pseudo as subtarget. 2014-01-16 Richard Henderson PR debug/54694 * reginfo.c (global_regs_decl): Globalize. * rtl.h (global_regs_decl): Declare. * ira.c (do_reload): Diagnose frame_pointer_needed and it reserved via global_regs. 2014-01-16 Peter Bergner Backport from mainline 2014-01-15 Uros Bizjak * config/i386/i386.c (ix86_hard_regno_mode_ok): Use VALID_AVX256_REG_OR_OI_MODE. 2013-09-05 Peter Bergner PR target/58139 * reginfo.c (choose_hard_reg_mode): Scan through all mode classes looking for widest mode. 2014-01-16 Marek Polacek Backported from mainline 2014-01-16 Marek Polacek PR middle-end/59827 * gimple-low.c (gimple_check_call_args): Don't use DECL_ARG_TYPE if it is error_mark_node. 2014-01-15 Andreas Krebbel PR target/59803 * config/s390/s390.c (s390_preferred_reload_class): Don't return ADDR_REGS for invalid symrefs in non-PIC code. 2014-01-14 Uros Bizjak Revert: 2014-01-08 Uros Bizjak * config/i386/i386.c (ix86_data_alignment): Calculate max_align from prefetch_block tune setting. 2014-01-13 Jakub Jelinek Backported from mainline 2014-01-10 Jakub Jelinek PR tree-optimization/59745 * tree-predcom.c (tree_predictive_commoning_loop): Call free_affine_expand_cache if giving up because components is NULL. 2014-01-10 Yufeng Zhang * config/arm/arm.c (arm_expand_neon_args): Call expand_expr with EXPAND_MEMORY for NEON_ARG_MEMORY; check if the returned rtx is const0_rtx or not. 2014-01-10 Andreas Krebbel * config/s390/s390.c (s390_expand_tbegin): Remove jump over CC extraction in good case. 2014-01-10 Huacai Chen * config/mips/driver-native.c (host_detect_local_cpu): Handle new kernel strings for Loongson-2E/2F/3A. 2014-01-10 Richard Biener PR tree-optimization/59715 * tree-flow.h (split_critical_edges): Declare. * tree-cfg.c (split_critical_edges): Export. * tree-ssa-sink.c (execute_sink_code): Split critical edges. 2014-01-09 Richard Sandiford * config/mips/mips.h (ISA_HAS_WSBH): Define. * config/mips/mips.md (UNSPEC_WSBH, UNSPEC_DSBH, UNSPEC_DSHD): New constants. (bswaphi2, bswapsi2, bswapdi2, wsbh, dsbh, dshd): New patterns. 2014-01-09 Richard Sandiford PR rtl-optimization/59137 * reorg.c (steal_delay_list_from_target): Call update_block for elided insns. (steal_delay_list_from_fallthrough, relax_delay_slots): Likewise. 2014-01-09 Richard Sandiford Revert: 2012-10-07 Richard Sandiford * config/mips/mips.c (mips_truncated_op_cost): New function. (mips_rtx_costs): Adjust test for BADDU. * config/mips/mips.md (*baddu_di): Push truncates to operands. 2012-10-02 Richard Sandiford * config/mips/mips.md (*baddu_si_eb, *baddu_si_el): Merge into... (*baddu_si): ...this new pattern. 2014-01-09 Richard Biener Backport from mainline 2013-11-18 Richard Biener PR tree-optimization/59125 PR tree-optimization/54570 * tree-ssa-sccvn.c (copy_reference_ops_from_ref): When inlining is not complete do not treat component-references with offset zero but different fields as equal. * tree-object-size.c: Include tree-phinodes.h and ssa-iterators.h. (compute_object_sizes): Apply TLC. Propagate the constant results into all uses and fold their stmts. * passes.def (pass_all_optimizations): Move pass_object_sizes after the first pass_forwprop and before pass_fre. 2013-12-03 Jakub Jelinek PR tree-optimization/59362 * tree-object-size.c (object_sizes): Change into array of vec. (compute_builtin_object_size): Check computed bitmap for non-NULL instead of object_sizes. Call safe_grow on object_sizes vector if new SSA_NAMEs appeared. (init_object_sizes): Check computed bitmap for non-NULL. Call safe_grow on object_sizes elements instead of initializing it with XNEWVEC. (fini_object_sizes): Call release on object_sizes elements, don't set it to NULL. 2014-01-09 Richard Earnshaw PR rtl-optimization/54300 * regcprop.c (copyprop_hardreg_forward_1): Ensure any unused outputs in a single-set are killed from the value chains. 2014-01-09 Jakub Jelinek PR rtl-optimization/59724 * ifcvt.c (cond_exec_process_if_block): Don't call flow_find_head_matching_sequence with 0 longest_match. * cfgcleanup.c (flow_find_head_matching_sequence): Count even non-active insns if !stop_after. (try_head_merge_bb): Revert 2014-01-07 changes. 2014-01-09 Hans-Peter Nilsson Backport from mainline 2013-12-23 Hans-Peter Nilsson PR middle-end/59584 * config/cris/predicates.md (cris_nonsp_register_operand): New define_predicate. * config/cris/cris.md: Replace register_operand with cris_nonsp_register_operand for destinations in all define_splits where a register is set more than once. 2014-01-08 H.J. Lu Backport from mainline 2013-12-25 H.J. Lu PR target/59587 * config/i386/i386.c (struct ptt): Add a field for processor name. (processor_target_table): Sync with processor_type. Add processor names. (cpu_names): Removed. (ix86_option_override_internal): Default x_ix86_tune_string to processor_target_table[TARGET_CPU_DEFAULT].name. (ix86_function_specific_print): Assert arch and tune < PROCESSOR_max. Use processor_target_table to print arch and tune names. * config/i386/i386.h (TARGET_CPU_DEFAULT): Default to PROCESSOR_GENERIC32. (target_cpu_default): Removed. (processor_type): Reordered. 2014-01-08 Uros Bizjak Backport from mainline 2014-01-05 Uros Bizjak * config/i386/i386.c (ix86_data_alignment): Calculate max_align from prefetch_block tune setting. (nocona_cost): Correct size of prefetch block to 64. 2014-01-08 Martin Jambor PR ipa/59610 * ipa-prop.c (ipa_compute_jump_functions): Bail out if not optimizing. (parm_preserved_before_stmt_p): Assume modification present when not optimizing. 2014-01-07 John David Anglin PR target/59652 * config/pa/pa.c (pa_legitimate_address_p): Return false before reload for 14-bit register offsets when INT14_OK_STRICT is false. 2014-01-07 Roland Stigge Michael Meissner PR 57386/target * config/rs6000/rs6000.c (rs6000_legitimate_offset_address_p): Only check TFmode for SPE constants. Don't check TImode or TDmode. 2014-01-07 Jakub Jelinek PR rtl-optimization/58668 * cfgcleanup.c (flow_find_cross_jump): Don't count any jumps if dir_p is NULL. Remove p1 variable and make USE/CLOBBER check consistent with other places. (flow_find_head_matching_sequence): Don't count USE or CLOBBER insns. (try_head_merge_bb): Adjust for the flow_find_head_matching_sequence counting change. * ifcvt.c (count_bb_insns): Don't count USE or CLOBBER insns. 2014-01-07 Mike Stump Jakub Jelinek PR pch/59436 * tree.h (struct tree_optimization_option): Change optabs type from unsigned char * to void *. * optabs.c (init_tree_optimization_optabs): Adjust TREE_OPTIMIZATION_OPTABS initialization. 2014-01-07 Jakub Jelinek Backported from mainline 2013-12-16 Jakub Jelinek PR middle-end/58956 PR middle-end/59470 * gimple.h (walk_stmt_load_store_addr_fn): New typedef. (walk_stmt_load_store_addr_ops, walk_stmt_load_store_ops): Use it for callback params. * gimple.c (walk_stmt_load_store_ops): Likewise. (walk_stmt_load_store_addr_ops): Likewise. Adjust all callback calls to supply the gimple operand containing the base tree as an extra argument. * tree-ssa-ter.c (find_ssaname, find_ssaname_in_store): New helper functions. (find_replaceable_in_bb): For calls or GIMPLE_ASM, only set same_root_var if USE is used somewhere in the stores of the stmt. * ipa-prop.c (visit_ref_for_mod_analysis): Remove name of the stmt argument and ATTRIBUTE_UNUSED, add another unnamed tree argument. * ipa-pure-const.c (check_load, check_store, check_ipa_load, check_ipa_store): Likewise. * gimple.c (gimple_ior_addresses_taken_1): Likewise. * ipa-split.c (test_nonssa_use, mark_nonssa_use): Likewise. (verify_non_ssa_vars, visit_bb): Adjust their callers. * cfgexpand.c (add_scope_conflicts_1): Use walk_stmt_load_store_addr_fn type for visit variable. (visit_op, visit_conflict): Remove name of the stmt argument and ATTRIBUTE_UNUSED, add another unnamed tree argument. * tree-sra.c (asm_visit_addr): Likewise. Remove name of the data argument and ATTRIBUTE_UNUSED. * cgraphbuild.c (mark_address, mark_load, mark_store): Add another unnamed tree argument. 2014-01-03 Andreas Schwab * config/m68k/m68k.c (handle_move_double): Handle pushes with overlapping registers also for registers other than the stack pointer. 2014-01-03 Jakub Jelinek PR target/59625 * config/i386/i386.c (ix86_avoid_jump_mispredicts): Don't consider asm goto as jump. 2014-01-01 Jakub Jelinek PR rtl-optimization/59647 * cse.c (cse_process_notes_1): Don't substitute negative VOIDmode new_rtx into UNSIGNED_FLOAT rtxes. 2013-12-28 Eric Botcazou * doc/invoke.texi (output file options): Document -fada-spec-parent. 2013-12-26 Uros Bizjak * config/i386/driver-i386.c (decode_caches_intel): Add missing entries. 2013-12-20 Jakub Jelinek PR c++/59255 Backported from mainline 2013-08-19 Dehao Chen * value-prof.c (gimple_ic): Fix the bug of adding EH edge. 2013-12-19 James Greenhalgh Backport from Mainline. 2013-05-01 James Greenhalgh * config/aarch64/aarch64-simd-builtins.def (cmhs): Rename to... (cmgeu): ...This. (cmhi): Rename to... (cmgtu): ...This. * config/aarch64/aarch64-simd.md (simd_mode): Add SF. (aarch64_vcond_internal): Use new names for unsigned comparison insns. (aarch64_cm): Rewrite to not use UNSPECs. * config/aarch64/aarch64.md (*cstore_neg): Rename to... (cstore_neg): ...This. * config/aarch64/iterators.md (VALLF): new. (unspec): Remove UNSPEC_CM. (COMPARISONS): New. (UCOMPARISONS): Likewise. (optab): Add missing comparisons. (n_optab): New. (cmp_1): Likewise. (cmp_2): Likewise. (CMP): Likewise. (cmp): Remove. (VCMP_S): Likewise. (VCMP_U): Likewise. (V_cmp_result): Add DF, SF modes. (v_cmp_result): Likewise. (v): Likewise. (vmtype): Likewise. * config/aarch64/predicates.md (aarch64_reg_or_fp_zero): New. Partial Backport from mainline. 2013-05-01 James Greenhalgh * config/aarch64/arm_neon.h (vc_<8,16,32,64>): Remap to builtins or C as appropriate. 2013-12-19 Dominik Vogt Andreas Krebbel Backport from mainline 2013-12-19 Dominik Vogt * config/s390/s390.c (s390_hotpatch_trampoline_halfwords_default): New constant (s390_hotpatch_trampoline_halfwords_max): New constant (s390_hotpatch_trampoline_halfwords): New static variable (get_hotpatch_attribute): New function (s390_handle_hotpatch_attribute): New function (s390_attribute_table): New target specific attribute table to implement the hotpatch attribute (s390_option_override): Parse hotpatch options (s390_function_num_hotpatch_trampoline_halfwords): New function (s390_can_inline_p): Implement target hook to suppress hotpatching for explicitly inlined functions (s390_asm_output_function_label): Generate hotpatch prologue (TARGET_ATTRIBUTE_TABLE): Define to implement target attribute table (TARGET_CAN_INLINE_P): Define to implement target hook * config/s390/s390.opt (mhotpatch): New options -mhotpatch, -mhotpatch= * config/s390/s390-protos.h (s390_asm_output_function_label): Add prototype * config/s390/s390.h (ASM_OUTPUT_FUNCTION_LABEL): Target specific function label generation for hotpatching (FUNCTION_BOUNDARY): Align functions to eight bytes * doc/extend.texi: Document hotpatch attribute * doc/invoke.texi: Document -mhotpatch option 2013-12-18 Eric Botcazou * config/arm/arm.c (arm_expand_epilogue_apcs_frame): Fix thinko. 2013-12-12 Vladimir Makarov PR middle-end/59470 * lra-coalesce.c (lra_coalesce): Invalidate inheritance pseudo values if necessary. 2013-12-12 Jakub Jelinek PR libgomp/59467 * gimplify.c (omp_check_private): Add copyprivate argument, if it is true, don't check omp_privatize_by_reference. (gimplify_scan_omp_clauses): For OMP_CLAUSE_COPYPRIVATE verify decl is private in outer context. Adjust omp_check_private caller. 2013-12-10 Eric Botcazou PR rtl-optimization/58295 * simplify-rtx.c (simplify_truncation): Restrict the distribution for WORD_REGISTER_OPERATIONS targets. 2013-12-10 Kai Tietz PR target/56807 * config/i386/i386.c (ix86_expand_prologue): Address saved registers stack-relative, not via frame-pointer. 2013-12-09 Alan Modra Apply from mainline 2013-12-05 Alan Modra * configure.ac (BUILD_CXXFLAGS) Don't use ALL_CXXFLAGS for build != host. : Clear GMPINC. Don't bother saving CFLAGS. * configure: Regenerate. 2013-12-08 Uros Bizjak Backport from mainline 2013-12-06 Uros Bizjak PR target/59405 * config/i386/i386.c (type_natural_mode): Properly handle size 8 for !TARGET_64BIT. 2013-12-07 Ralf Corsépius * config.gcc (microblaze*-*-rtems*): Add TARGET_BIG_ENDIAN_DEFAULT. 2013-12-06 Jakub Jelinek PR tree-optimization/59388 * tree-ssa-reassoc.c (update_range_test): If op == range->exp, gimplify tem after stmt rather than before it. 2013-12-06 Oleg Endo Backport from mainline 2013-11-26 Oleg Endo PR target/58314 PR target/50751 * config/sh/sh.c (max_mov_insn_displacement, disp_addr_displacement): Prefix function names with 'sh_'. Make them non-static. * config/sh/sh-protos.h (sh_disp_addr_displacement, sh_max_mov_insn_displacement): Add declarations. * config/sh/constraints.md (Q): Reject QImode. (Sdd): Use match_code "mem". (Snd): Fix erroneous matching of non-memory operands. * config/sh/predicates.md (short_displacement_mem_operand): New predicate. (general_movsrc_operand): Disallow PC relative QImode loads. * config/sh/sh.md (*mov_reg_reg): Remove it. (*movqi, *movhi): Merge both insns into... (*mov): ... this new insn. Replace generic 'm' constraints with 'Snd' and 'Sdd' constraints. Calculate insn length dynamically based on the operand types. 2013-12-06 Richard Biener Backport from mainline 2013-11-29 Richard Biener PR tree-optimization/59334 * tree-ssa-dce.c (eliminate_unnecessary_stmts): Fix bug in previous commit. 2013-11-28 Richard Biener PR tree-optimization/59330 * tree-ssa-dce.c (eliminate_unnecessary_stmts): Simplify and fix delayed marking of free calls not necessary. 2013-12-06 Richard Biener Backport from mainline 2013-11-27 Richard Biener PR tree-optimization/59288 * tree-vect-loop.c (get_initial_def_for_induction): Do not re-analyze the PHI but use STMT_VINFO_LOOP_PHI_EVOLUTION_PART. 2013-11-19 Richard Biener PR tree-optimization/59164 * tree-vect-loop.c (vect_analyze_loop_operations): Adjust check whether we can create an epilogue loop to reflect the cases where we create one. 2013-09-05 Richard Biener PR tree-optimization/58137 * tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Do not create vectors of pointers. * tree-vect-loop.c (get_initial_def_for_induction): Use proper types for the components of the vector initializer. * tree-cfg.c (verify_gimple_assign_binary): Remove special-casing allowing pointer vectors with PLUS_EXPR/MINUS_EXPR. 2013-12-06 Oleg Endo PR target/51244 PR target/59343 * config/sh/sh.md (*cbranch_t): Check that there are no labels between the s1 insn and the testing insn. Remove REG_DEAD note from s1 insn. 2013-12-05 Richard Biener Backport from mainline 2013-11-19 Richard Biener PR middle-end/58956 * tree-ssa-ter.c (find_replaceable_in_bb): Avoid forwarding loads into stmts that may clobber it. 2013-12-04 Jakub Jelinek PR rtl-optimization/58726 * combine.c (force_to_mode): Fix comment typo. Don't destructively modify x for ROTATE, ROTATERT and IF_THEN_ELSE. 2013-12-04 Jakub Jelinek Uros Bizjak PR target/59163 * config/i386/i386.c (ix86_legitimate_combined_insn): If for !TARGET_AVX there is misaligned MEM operand with vector mode and get_attr_ssememalign is 0, return false. (ix86_expand_special_args_builtin): Add get_pointer_alignment computed alignment and for non-temporal loads/stores also at least GET_MODE_ALIGNMENT as MEM_ALIGN. * config/i386/sse.md (_loadu, _storeu, _loaddqu, _storedqu, _lddqu, sse_vmrcpv4sf2, sse_vmrsqrtv4sf2, sse2_cvtdq2pd, sse_movhlps, sse_movlhps, sse_storehps, sse_loadhps, sse_loadlps, *vec_interleave_highv2df, *vec_interleave_lowv2df, *vec_extractv2df_1_sse, sse2_loadhpd, sse2_loadlpd, sse2_movsd, sse4_1_v8qiv8hi2, sse4_1_v4qiv4si2, sse4_1_v4hiv4si2, sse4_1_v2qiv2di2, sse4_1_v2hiv2di2, sse4_1_v2siv2di2, sse4_2_pcmpestr, *sse4_2_pcmpestr_unaligned, sse4_2_pcmpestri, sse4_2_pcmpestrm, sse4_2_pcmpestr_cconly, sse4_2_pcmpistr, *sse4_2_pcmpistr_unaligned, sse4_2_pcmpistri, sse4_2_pcmpistrm, sse4_2_pcmpistr_cconly): Add ssememalign attribute. * config/i386/i386.md (ssememalign): New define_attr. 2013-12-03 Jakub Jelinek PR middle-end/59011 * gimplify.c (nonlocal_vla_vars): New variable. (gimplify_var_or_parm_decl): Put VAR_DECLs for VLAs into nonlocal_vla_vars chain. (gimplify_body): Call declare_vars on nonlocal_vla_vars chain if outer_bind has DECL_INITIAL (current_function_decl) block. PR target/58864 * optabs.c (emit_conditional_move): Save and restore pending_stack_adjust and stack_pointer_delta if cmove can't be used. 2013-12-02 Jakub Jelinek PR tree-optimization/59358 * tree-vrp.c (union_ranges): To check for the partially overlapping ranges or adjacent ranges, also compare *vr0max with vr1max. 2013-12-02 Richard Biener PR tree-optimization/59139 * tree-ssa-loop-niter.c (chain_of_csts_start): Properly match code in get_val_for. (get_val_for): Use gcc_checking_asserts. 2013-11-27 Tom de Vries Marc Glisse PR middle-end/59037 * fold-const.c (fold_indirect_ref_1): Don't create out-of-bounds BIT_FIELD_REF. * gimplify.c (gimple_fold_indirect_ref): Same. 2013-12-01 Eric Botcazou * config/i386/winnt.c (i386_pe_asm_named_section): Be prepared for an identifier node. 2013-12-01 Bernd Edlinger * expr.c (emit_group_store): Fix off-by-one BITFIELD_END argument. 2013-11-28 Kyrylo Tkachov Backport from mainline 2013-11-28 Kyrylo Tkachov * config/arm/iterators.md (vrint_conds): New int attribute. * config/arm/vfp.md (2): Set conds attribute. (smax3): Likewise. (smin3): Likewise. 2013-11-28 Uros Bizjak Backport from mainline 2013-11-27 Uros Bizjak Ganesh Gopalasubramanian PR target/56788 * gcc.target/i386/xop-frczX.c: New test. 2013-11-28 Terry Guo Backport mainline r205391 2013-11-26 Terry Guo * config/arm/arm.c (require_pic_register): Handle high pic base register for thumb-1. (arm_load_pic_register): Also initialize high pic base register. * doc/invoke.texi: Update documentation for option -mpic-register. 2013-11-27 Jakub Jelinek Backported from mainline 2013-11-26 Jakub Jelinek PR tree-optimization/59014 * tree-vrp.c (register_edge_assert_for_1): Don't look through conversions from non-integral types or through narrowing conversions. 2013-11-27 Eric Botcazou PR middle-end/59138 * expr.c (emit_group_store): Don't write past the end of the structure. (store_bit_field): Fix formatting. 2013-11-24 Sebastian Huber Backport from mainline 2013-09-17 Sebastian Huber * config/sparc/t-rtems: Add leon3 multilibs. 2013-11-24 Sebastian Huber Backport from mainline 2013-08-09 Eric Botcazou * configure.ac: Add GAS check for LEON instructions on SPARC. * configure: Regenerate. * config.in: Likewise. * config.gcc (with_cpu): Remove sparc-leon*-* and deal with LEON in the sparc*-*-* block. * config/sparc/sparc.opt (LEON, LEON3): New masks. * config/sparc/sparc.h (ASM_CPU32_DEFAULT_SPEC): Set to AS_LEON_FLAG for LEON or LEON3. (ASM_CPU_SPEC): Pass AS_LEON_FLAG if -mcpu=leon or -mcpu=leon3. (AS_LEON_FLAG): New macro. * config/sparc/sparc.c (sparc_option_override): Set MASK_LEON for leon and MASK_LEON3 for leon3 and unset them if HAVE_AS_LEON is not defined. Deal with LEON and LEON3 for the memory model. * config/sparc/sync.md (atomic_compare_and_swap): Enable if LEON3 (atomic_compare_and_swap_1): Likewise. (*atomic_compare_and_swap_1): Likewise. 2013-11-24 Sebastian Huber Backport from mainline 2013-07-23 Eric Botcazou * doc/invoke.texi (SPARC Options): Document new leon3 processor value. 2013-11-24 Sebastian Huber Backport from mainline 2013-07-22 Eric Botcazou * config.gcc (sparc*-*-*): Accept leon3 processor. (sparc-leon*-*): Merge with sparc*-*-* and add leon3 support. * doc/invoke.texi (SPARC Options): Adjust -mfix-ut699 entry. * config/sparc/sparc-opts.h (enum processor_type): Add PROCESSOR_LEON3. * config/sparc/sparc.opt (enum processor_type): Add leon3. (mfix-ut699): Adjust comment. * config/sparc/sparc.h (TARGET_CPU_leon3): New define. (CPP_CPU32_DEFAULT_SPEC): Add leon3 support. (CPP_CPU_SPEC): Likewise. (ASM_CPU_SPEC): Likewise. * config/sparc/sparc.c (leon3_cost): New constant. (sparc_option_override): Add leon3 support. (mem_ref): New function. (sparc_gate_work_around_errata): Return true if -mfix-ut699 is enabled. (sparc_do_work_around_errata): Look into the instruction in the delay slot and adjust accordingly. Add fix for the data cache nullify issues of the UT699. Change insertion position for the NOP. * config/sparc/leon.md (leon_fpalu, leon_fpmds, write_buf): Delete. (leon3_load): New reservation. (leon_store): Bump latency to 2. (grfpu): New automaton. (grfpu_alu): New unit. (grfpu_ds): Likewise. (leon_fp_alu): Adjust. (leon_fp_mult): Delete. (leon_fp_div): Split into leon_fp_divs and leon_fp_divd. (leon_fp_sqrt): Split into leon_fp_sqrts and leon_fp_sqrtd. * config/sparc/sparc.md (cpu): Add leon3. * config/sparc/sync.md (atomic_exchangesi): Disable if -mfix-ut699. (swapsi): Likewise. (atomic_test_and_set): Likewise. (ldstub): Likewise. 2013-11-24 Sebastian Huber Backport from mainline 2013-04-10 Steven Bosscher * config/sparc/sparc.c: Include tree-pass.h. (TARGET_MACHINE_DEPENDENT_REORG): Do not redefine. (sparc_reorg): Rename to sparc_do_work_around_errata. Move to head of file. Change return type. Split off gate function. (sparc_gate_work_around_errata): New function. (pass_work_around_errata): New pass definition. (insert_pass_work_around_errata) New pass insert definition to insert pass_work_around_errata just after delayed-branch scheduling. (sparc_option_override): Insert the pass. * config/sparc/t-sparc (sparc.o): Add TREE_PASS_H dependence. 2013-11-24 Sebastian Huber Backport from mainline 2013-05-28 Eric Botcazou * doc/invoke.texi (SPARC Options): Document -mfix-ut699. * builtins.c (expand_builtin_mathfn) : Try to widen the mode if the instruction isn't available in the original mode. * config/sparc/sparc.opt (mfix-ut699): New option. * config/sparc/sparc.md (muldf3_extend): Disable if -mfix-ut699. (divdf3): Turn into expander. (divdf3_nofix): New insn. (divdf3_fix): Likewise. (divsf3): Disable if -mfix-ut699. (sqrtdf2): Turn into expander. (sqrtdf2_nofix): New insn. (sqrtdf2_fix): Likewise. (sqrtsf2): Disable if -mfix-ut699. 2013-11-22 Eric Botcazou * print-rtl.c (print_rtx) : Output a space if no MEM_EXPR. 2013-11-21 Zhenqiang Chen PR bootstrap/57683 Backport from mainline: r197467 and r198999. 2013-04-03 Jeff Law * Makefile.in (lra-constraints.o): Depend on $(OPTABS_H). (lra-eliminations.o): Likewise. 2013-05-16 Jeff Law * Makefile.in (tree-switch-conversion.o): Depend on $(OPTABS_H). 2013-11-20 Eric Botcazou PR target/59207 * config/sparc/sparc.c (sparc_fold_builtin) : Make sure neg2_ovf is set before being used. 2013-11-20 Andreas Krebbel Dominik Vogt Backport from mainline * config/s390/s390.c (s390_canonicalize_comparison): Don't fold int comparisons with an out of range condition code. (s390_optimize_nonescaping_tx): Skip empty BBs. Generate the new tbegin RTX when removing the FPR clobbers (with two SETs). (s390_expand_tbegin): Fix the retry loop counter. Copy CC to the result before doing the retry calculations. (s390_init_builtins): Make tbegin "returns_twice" and tabort "noreturn". * config/s390/s390.md (UNSPECV_TBEGIN_TDB): New constant used for the TDB setting part of an tbegin. ("tbegin_1", "tbegin_nofloat_1"): Add a set for the TDB. ("tx_assist"): Set unused argument to an immediate zero instead of loading zero into a GPR and pass it as argument. * config/s390/htmxlintrin.h (__TM_simple_begin, __TM_begin): Remove inline and related attributes. (__TM_nesting_depth, __TM_is_user_abort, __TM_is_named_user_abort) (__TM_is_illegal, __TM_is_footprint_exceeded) (__TM_is_nested_too_deep, __TM_is_conflict): Fix format value check. 2013-11-19 Uros Bizjak Backport from mainline 2013-11-18 Uros Bizjak * config/i386/i386.c (ix86_decompose_address): Use REG_P instead of ix86_address_subreg_operand. Move subreg checks to ix86_validate_address_register. Move address override check to ix86_legitimate_address_p. (ix86_validate_address_register): New function. (ix86_legitimate_address_p): Call ix86_validate_address_register to validate base and index registers. Add address override check from ix86_decompose_address. (ix86_decompose_address): Remove. Backport from mainline 2013-11-17 Uros Bizjak PR target/59153 * config/i386/i386.c (ix86_address_subreg_operand): Do not reject non-integer subregs. (ix86_decompose_address): Do not reject invalid CONST_INT RTXes. Move check for invalid x32 constant addresses ... (ix86_legitimate_address_p): ... here. 2013-11-19 Richard Biener Backport from mainline 2013-11-07 Richard Biener * tree-dfa.c (get_ref_base_and_extent): Fix casting. 2013-11-19 Richard Biener PR tree-optimization/57517 * tree-predcom.c (combinable_refs_p): Verify the combination is always executed when the refs are. 2013-11-19 Richard Biener Backport from mainline 2013-11-05 Richard Biener PR middle-end/58941 * tree-dfa.c (get_ref_base_and_extent): Merge common code in MEM_REF and TARGET_MEM_REF handling. Make sure to process trailing array detection before diving into the view-converted object (and possibly apply some extra offset). 2013-11-18 Richard Biener Backport from mainline 2013-10-21 Richard Biener PR tree-optimization/58794 * fold-const.c (operand_equal_p): Compare FIELD_DECL operand of COMPONENT_REFs with OEP_CONSTANT_ADDRESS_OF left in place. 2013-10-21 Richard Biener PR middle-end/58742 * fold-const.c (fold_binary_loc): Fold ((T) (X /[ex] C)) * C to (T) X for sign-changing conversions (or no conversion). 2013-11-06 Richard Biener PR tree-optimization/58653 * tree-predcom.c (ref_at_iteration): Rewrite to generate a MEM_REF. (prepare_initializers_chain): Adjust. PR tree-optimization/59047 * tree-predcom.c (ref_at_iteration): Handle bitfield accesses properly. 2013-10-15 Richard Biener PR tree-optimization/58143 * tree-ssa-loop-im.c (arith_code_with_undefined_signed_overflow): New function. (rewrite_to_defined_overflow): Likewise. (move_computations_dom_walker::before_dom): Rewrite stmts with undefined signed overflow that are not always executed into unsigned arithmetic. 2013-11-14 Uros Bizjak Backport from mainline 2013-11-10 Uros Bizjak * mode-switching.c (optimize_mode_switching): Mark block as nontransparent, if last_mode at block exit is different from no_mode. Backport from mainline 2013-11-06 Uros Bizjak PR target/59021 * config/i386/i386.c (ix86_avx_u128_mode_needed): Require AVX_U128_DIRTY mode for call_insn RTXes that use AVX256 registers. (ix86_avx_u128_mode_needed): Return AVX_U128_DIRTY mode for call_insn RTXes that return in AVX256 register. 2013-11-14 Jakub Jelinek Uros Bizjak PR target/59101 * config/i386/i386.md (*anddi_2): Only allow CCZmode if operands[2] satisfies_constraint_Z that might have bit 31 set. 2013-11-12 H.J. Lu Backported from mainline 2013-11-12 H.J. Lu PR target/59088 * config/i386/i386.c (initial_ix86_tune_features): Set X86_TUNE_SSE_UNALIGNED_LOAD_OPTIMAL and X86_TUNE_SSE_UNALIGNED_STORE_OPTIMAL for m_HASWELL. 2013-11-11 Ramana Radhakrishnan Backported from mainline 2013-10-30 Ramana Radhakrishnan PR target/58854 * config/arm/arm.c (arm_expand_epilogue_apcs_frame): Emit blockage 2013-11-11 Jakub Jelinek Backported from mainline 2013-11-06 Jakub Jelinek PR middle-end/58970 * expr.c (get_bit_range): Handle *offset == NULL_TREE. (expand_assignment): If *bitpos is negative, set *offset and adjust *bitpos, so that it is not negative. 2013-11-05 Jakub Jelinek PR rtl-optimization/58997 * loop-iv.c (iv_subreg): For IV_UNKNOWN_EXTEND, expect get_iv_value to be in iv->mode rather than iv->extend_mode. (iv_extend): Likewise. Otherwise, if iv->extend != extend, use lowpart_subreg on get_iv_value before calling simplify_gen_unary. * loop-unswitch.c (may_unswitch_on): Make sure op[i] is in the right mode. 2013-11-10 Karlson2k Kai Tietz Merged from trunk PR plugins/52872 * configure.ac: Adding for exported symbols check and for rdynamic-check executable-extension. * configure: Regenerated. 2013-11-07 H.J. Lu PR target/59034 * config/i386/i386.md (push peepholer/splitter): Use Pmode with stack_pointer_rtx. 2013-11-05 Uros Bizjak * config/i386/t-rtems (MULTILIB_MATCHES): Fix option typos. 2013-11-05 Jakub Jelinek PR tree-optimization/58984 * ipa-prop.c (ipa_load_from_parm_agg_1): Add SIZE_P argument, set *SIZE_P if non-NULL on success. (ipa_load_from_parm_agg, ipa_analyze_indirect_call_uses): Adjust callers. (ipcp_transform_function): Likewise. Punt if size of access is different from TYPE_SIZE on v->value's type. 2013-11-03 H.J. Lu Backport from mainline 2013-10-12 H.J. Lu PR target/58690 * config/i386/i386.c (ix86_copy_addr_to_reg): New function. (ix86_expand_movmem): Replace copy_addr_to_reg with ix86_copy_addr_to_reg. (ix86_expand_setmem): Likewise. 2013-10-29 Uros Bizjak Backport from mainline 2013-08-08 Richard Sandiford PR rtl-optimization/58079 * combine.c (combine_simplify_rtx): Avoid using SUBST if simplify_comparison has widened a comparison with an integer. 2013-10-29 Martin Jambor PR middle-end/58789 Backport from mainline 2013-05-09 Martin Jambor PR lto/57084 * gimple-fold.c (canonicalize_constructor_val): Call cgraph_get_create_real_symbol_node instead of cgraph_get_create_node. Backport from mainline 2013-03-16 Jan Hubicka * cgraph.h (cgraph_get_create_real_symbol_node): Declare. * cgraph.c (cgraph_get_create_real_symbol_node): New function. * cgrpahbuild.c: Use cgraph_get_create_real_symbol_node instead of cgraph_get_create_node. * ipa-prop.c (ipa_make_edge_direct_to_target): Likewise. 2013-10-28 Tom de Vries * cfgexpand.c (gimple_expand_cfg): Remove test for parm_birth_insn. Don't commit insertions after NOTE_INSN_FUNCTION_BEG. 2013-10-26 Uros Bizjak Backport from mainline 2013-10-22 Uros Bizjak PR target/58779 * config/i386/i386.c (put_condition_code) : Remove CCCmode handling. : Return 'c' suffix for CCCmode. : Return 'nc' suffix for CCCmode. (ix86_cc_mode) : Do not generate overflow checks. * config/i386/i386.md (*sub3_cconly_overflow): Remove. (*sub3_cc_overflow): Ditto. (*subsi3_zext_cc_overflow): Ditto. 2013-10-26 Uros Bizjak Backport from mainline 2013-10-19 Uros Bizjak PR target/58792 * config/i386/i386.c (ix86_function_value_regno): Add DX_REG, ST1_REG and XMM1_REG for 32bit and 64bit targets. Also add DI_REG and SI_REG for 64bit SYSV ABI targets. 2013-08-25 Richard Henderson PR rtl/58542 * optabs.c (maybe_emit_atomic_exchange): Use create_input_operand instead of create_convert_operand_to. (maybe_emit_sync_lock_test_and_set): Likewise. (expand_atomic_compare_and_swap): Likewise. (maybe_emit_compare_and_swap_exchange_loop): Don't convert_modes. 2013-10-25 Eric Botcazou PR rtl-optimization/58831 * alias.c (init_alias_analysis): At the beginning of each iteration, set the reg_seen[N] bit if static_reg_base_value[N] is non-null. 2013-10-25 Eric Botcazou * recog.c (search_ofs): New static variable moved from... (peep2_find_free_register): ...here. (peephole2_optimize): Initialize it. 2013-10-24 David Edelsohn Backport from mainline 2013-10-23 David Edelsohn PR target/58838 * config/rs6000/rs6000.md (mulsi3_internal1 and splitter): Add TARGET_32BIT final condition. (mulsi3_internal2 and splitter): Same. 2013-10-23 Tom de Vries PR tree-optimization/58805 * tree-ssa-tail-merge.c (stmt_local_def): Add gimple_vdef check. 2013-10-23 Richard Biener Backport from mainline 2013-06-24 Richard Biener PR tree-optimization/57488 * tree-ssa-pre.c (insert): Clear NEW sets before each iteration. 2013-10-16 Ganesh Gopalasubramanian Backport from mainline 2013-10-16 Ganesh Gopalasubramanian * config/i386/i386.c (ix86_option_override_internal): Enable FMA4 for AMD bdver3. 2013-10-16 Jakub Jelinek * BASE-VER: Set to 4.8.3. * DEV-PHASE: Set to prerelease. 2013-10-16 Release Manager * GCC 4.8.2 released. 2013-10-12 James Greenhalgh Backport from mainline. 2013-10-12 James Greenhalgh * config/aarch64/arm_neon.h (vtbx<1,3>_8): Fix register constriants. 2013-10-10 Jakub Jelinek PR middle-end/58670 * stmt.c (expand_asm_operands): Add FALLTHRU_BB argument, if any labels are in FALLTHRU_BB, use a special label emitted immediately after the asm goto insn rather than label_rtx of the LABEL_DECL. (expand_asm_stmt): Adjust caller. * cfgrtl.c (commit_one_edge_insertion): Force splitting of edge if the last insn in predecessor is a jump with single successor, but it isn't simplejump_p. 2013-10-09 Jakub Jelinek Backport from mainline 2013-09-26 Richard Biener PR tree-optimization/58539 * tree-vect-loop.c (vect_create_epilog_for_reduction): Honor the fact that debug statements are not taking part in loop-closed SSA construction. 2013-10-07 Andreas Krebbel * config/s390/s390.c (s390_register_info): Make the call-saved FPR loop to work also for 31bit ABI. Save the stack pointer for frame_size > 0. 2013-10-07 Andreas Krebbel * config/s390/s390.md ("tbegin", "tbegin_nofloat", "tbegin_retry") ("tbegin_retry_nofloat", "tend", "tabort", "tx_assist"): Remove constraint letters from expanders. ("tbegin_retry", "tbegin_retry_nofloat"): Change predicate of the retry count to general_operand. ("tabort"): Give operand 0 a mode. ("tabort_1"): Add mode and constraint letter for operand 0. * doc/extend.texi: Fix protoype of __builtin_non_tx_store. 2013-10-04 Marcus Shawcroft Backport from mainline. PR target/58460 * config/aarch64/aarch64.md (*add__) (*add__si_uxtw,*add_mul_imm_) (*sub__) (*sub__si_uxtw,*sub_mul_imm_, *sub_mul_imm_si_uxtw): Remove k constraint. 2013-10-02 John David Anglin * config.gcc (hppa*64*-*-linux*): Don't add pa/t-linux to tmake_file. 2013-10-01 Jakub Jelinek Andreas Krebbel PR target/58574 * config/s390/s390.c (s390_chunkify_start): Handle tablejump_p first, continue when done, for other jumps look through PARALLEL unconditionally. 2013-09-30 Jakub Jelinek PR middle-end/58564 * fold-const.c (fold_ternary_loc): For A < 0 : : 0 optimization, punt if sign_bit_p looked through any zero extension. 2013-09-27 Paulo Matos Backport from mainline. PR middle-end/58463 2013-03-27 Richard Biener PR tree-optimization/56716 * tree-ssa-structalias.c (perform_var_substitution): Adjust dumping for ref nodes. 2013-09-27 Paulo Matos Backport from mainline. 2013-09-27 Paulo Matos PR middle-end/58463 * gcc.dg/pr58463.c: New test. 2013-09-23 Eric Botcazou * tree-ssa-ccp.c (insert_clobber_before_stack_restore): Recurse on copy assignment statements. 2013-09-23 Alan Modra PR target/58330 * config/rs6000/rs6000.md (bswapdi2_64bit): Disable for volatile mems. 2013-09-23 Alan Modra * config/rs6000/predicates.md (add_cint_operand): New. (reg_or_add_cint_operand, small_toc_ref): Use add_cint_operand. * config/rs6000/rs6000.md (largetoc_high_plus): Restrict offset using add_cint_operand. (largetoc_high_plus_aix): Likewise. * config/rs6000/rs6000.c (toc_relative_expr_p): Use add_cint_operand. 2013-09-20 John David Anglin PR middle-end/56791 * config/pa/pa.c (pa_option_override): Disable auto increment and decrement instructions until reload is completed. * config/pa/pa.md: In "scc" insn patterns, change output template to handle const0_rtx in reg_or_0_operand operands. 2013-09-19 Jakub Jelinek * omp-low.c (expand_omp_sections): Always pass len - 1 to GOMP_sections_start, even if !exit_reachable. 2013-09-18 Richard Earnshaw * arm.c (arm_expand_prologue): Validate architecture supports LDRD/STRD before accepting tuning preferences. (arm_expand_epilogue): Likewise. 2013-09-18 Daniel Morris Paolo Carlini PR c++/58458 * doc/implement-cxx.texi: Fix references to the C++ standards. 2013-09-17 Kyrylo Tkachov PR tree-optimization/58088 * fold-const.c (mask_with_trailing_zeros): New function. (fold_binary_loc): Make sure we don't recurse infinitely when the X in (X & C1) | C2 is a tree of the form (Y * K1) & K2. Use mask_with_trailing_zeros where appropriate. 2013-09-14 John David Anglin PR target/58382 * config/pa/pa.c (pa_expand_prologue): Change mode in gen_rtx_POST_INC calls to word_mode. 2013-09-13 Christian Bruel PR target/58314 * config/sh/sh.md (mov_reg_reg): Allow memory reloads. 2013-09-11 Andi Kleen Backport from mainline * doc/extend.texi: Use __atomic_store_n instead of __atomic_store in HLE example. 2013-09-11 Andi Kleen Backport from mainline * doc/extend.texi: Dont use __atomic_clear in HLE example. Fix typo. 2013-09-11 Andi Kleen Backport from mainline * doc/extend.texi: Document that __atomic_clear and __atomic_test_and_set should only be used with bool. 2013-09-11 Richard Biener PR middle-end/58377 * passes.c (init_optimization_passes): Split critical edges before late uninit warning pass in the -Og pipeline. 2013-09-11 Jakub Jelinek PR tree-optimization/58385 * fold-const.c (build_range_check): If both low and high are NULL, use omit_one_operand_loc to preserve exp side-effects. 2013-09-10 Richard Earnshaw PR target/58361 * arm/vfp.md (combine_vcvt_f32_): Fix pattern to support conditional execution. (combine_vcvt_f64_): Likewise. 2013-09-10 Jakub Jelinek PR rtl-optimization/58365 * cfgcleanup.c (merge_memattrs): Also clear MEM_READONLY_P resp. MEM_NOTRAP_P if they differ, or set MEM_VOLATILE_P if it differs. 2013-09-09 Jakub Jelinek PR tree-optimization/58364 * tree-ssa-reassoc.c (init_range_entry): For BIT_NOT_EXPR on BOOLEAN_TYPE, only invert in_p and continue with arg0 if the current range can't be an unconditional true or false. 2013-09-09 Kyrylo Tkachov PR target/57735 Backport from mainline 2013-04-30 Richard Sandiford * explow.c (plus_constant): Pass "mode" to immed_double_int_const. Use gen_int_mode rather than GEN_INT. 2013-09-09 Richard Biener Backport from mainline 2013-08-27 Richard Biener PR tree-optimization/57521 * tree-if-conv.c (if_convertible_bb_p): Verify that at least one edge is non-critical. (find_phi_replacement_condition): Make sure to use a non-critical edge. Cleanup and remove old bug workarounds. (bb_postdominates_preds): Remove. (if_convertible_loop_p_1): Do not compute post-dominators. (combine_blocks): Do not free post-dominators. (main_tree_if_conversion): Likewise. 2013-09-09 Richard Biener Backport from mainline 2013-09-03 Richard Biener PR middle-end/57656 * fold-const.c (negate_expr_p): Fix division case. (negate_expr): Likewise. 2013-09-09 Richard Biener Backport from mainline 2013-08-29 Richard Biener PR tree-optimization/57685 * tree-vrp.c (register_edge_assert_for_1): Recurse only for single-use operands to avoid exponential complexity. 2013-09-09 Richard Biener Backport from mainline 2013-08-30 Richard Biener PR tree-optimization/58223 * tree-loop-distribution.c (has_anti_dependence): Rename to ... (has_anti_or_output_dependence): ... this and adjust to also look for output dependences. (mark_nodes_having_upstream_mem_writes): Adjust. (rdg_flag_uses): Likewise. 2013-09-03 Richard Biener Backport from mainline 2013-08-29 Richard Biener PR tree-optimization/58246 * tree-ssa-dce.c (mark_aliased_reaching_defs_necessary_1): Properly handle the dominance check inside a basic-block. 2013-09-03 Richard Biener Backport from mainline 2013-08-30 Richard Biener PR tree-optimization/58228 * tree-vect-data-refs.c (vect_analyze_data_ref_access): Do not allow invariant loads in nested loop vectorization. 2013-09-03 Richard Biener Backport from mainline 2013-08-30 Richard Biener PR tree-optimization/58010 * tree-vect-loop.c (vect_create_epilog_for_reduction): Remove assert that we have a loop-closed PHI. 2013-09-01 Uros Bizjak Backport from mainline 2013-08-31 Uros Bizjak * config/alpha/alpha.c (alpha_emit_conditional_move): Update "cmp" RTX before signed_comparison_operator check to account for "code" changes. 2013-09-01 John David Anglin * config/pa/pa.md: Allow "const 0" operand 1 in "scc" insns. 2013-08-30 Jakub Jelinek PR tree-optimization/58277 * tree-ssa-strlen.c (strlen_enter_block): If do_invalidate gave up after seeing too many stmts with vdef in between dombb and current bb, invalidate everything. 2013-08-29 Oleg Endo Backport from mainline 2013-08-05 Oleg Endo PR other/12081 * recog.h (rtx (*insn_gen_fn) (rtx, ...)): Replace typedef with new class insn_gen_fn. * expr.c (move_by_pieces_1, store_by_pieces_2): Replace argument rtx (*) (rtx, ...) with insn_gen_fn. * genoutput.c (output_insn_data): Cast gen_? function pointers to insn_gen_fn::stored_funcptr. Add initializer braces. Backport from mainline 2013-08-07 Oleg Endo PR other/12081 * config/rs6000/rs6000.c (gen_2arg_fn_t): Remove typedef. (rs6000_emit_swdiv_high_precision, rs6000_emit_swdiv_low_precision, rs6000_emit_swrsqrt): Don't cast result of GEN_FCN to gen_2arg_fn_t. 2013-08-29 Jakub Jelinek Backported from mainline 2013-05-27 Richard Biener PR middle-end/57381 PR tree-optimization/57417 * tree-ssa-sccvn.c (vn_reference_fold_indirect): Fix test for unchanged base. (set_ssa_val_to): Compare addresses using get_addr_base_and_unit_offset. PR tree-optimization/57396 * tree-affine.c (double_int_constant_multiple_p): Properly return false for val == 0 and div != 0. PR tree-optimization/57343 * tree-ssa-loop-niter.c (number_of_iterations_ne_max): Do not use multiple_of_p if not TYPE_OVERFLOW_UNDEFINED. (number_of_iterations_cond): Do not build the folded tree. 2013-08-28 Jakub Jelinek PR middle-end/58257 * omp-low.c (copy_var_decl): Copy over TREE_NO_WARNING flag. 2013-08-28 Richard Biener Backport from mainline 2013-06-24 Richard Biener PR middle-end/56977 * passes.c (init_optimization_passes): Move pass_fold_builtins and pass_dce earlier with -Og. 2013-08-28 Uros Bizjak Backport from mainline 2013-08-27 H.J. Lu * config/i386/driver-i386.c (host_detect_local_cpu): Update Haswell processor detection. Backport from mainline 2013-08-27 Christian Widmer PR target/57927 * config/i386/driver-i386.c (host_detect_local_cpu): Add detection of Ivy Bridge and Haswell processors. Assume core-avx2 for unknown AVX2 capable processors. 2013-08-23 Jakub Jelinek PR target/58218 * config/i386/x86-64.h (TARGET_SECTION_TYPE_FLAGS): Define. * config/i386/i386.c (x86_64_elf_section_type_flags): New function. PR tree-optimization/58209 * tree-tailcall.c (find_tail_calls): Give up for pointer result types if m or a is non-NULL. 2013-08-21 Richard Earnshaw PR target/56979 * arm.c (aapcs_vfp_allocate): Decompose the argument if the suggested mode for the assignment isn't compatible with the registers required. 2013-08-20 Alan Modra PR target/57865 * config/rs6000/rs6000.c (rs6000_emit_prologue): Correct ool_adjust. (rs6000_emit_epilogue): Likewise. 2013-08-19 Peter Bergner Jakub Jelinek Backport from mainline * config/rs6000/dfp.md (*negtd2_fpr): Handle non-overlapping destination and source operands. 2013-08-18 Jakub Jelinek PR tree-optimization/58006 * tree-parloops.c (take_address_of): Don't ICE if get_name returns NULL. (eliminate_local_variables_stmt): Remove clobber stmts. 2013-08-16 Jakub Jelinek PR tree-optimization/58164 * gimple.c (walk_stmt_load_store_addr_ops): For visit_addr walk gimple_goto_dest of GIMPLE_GOTO. PR tree-optimization/58165 * tree-call-cdce.c (shrink_wrap_one_built_in_call): If bi_call must be the last stmt in a bb, don't split_block, instead use fallthru edge from it and give up if there is none. Release conds vector when returning early. 2013-08-15 David Given Backport from mainline 2013-04-26 Vladimir Makarov * lra-constraints.c (process_alt_operands): Use #if HAVE_ATTR_enable instead of #ifdef. 2013-08-14 Jakub Jelinek PR tree-optimization/58145 * tree-sra.c (build_ref_for_offset): If prev_base has TREE_THIS_VOLATILE or TREE_SIDE_EFFECTS, propagate it to MEM_REF. 2013-08-14 Andreas Krebbel * config/s390/htmxlintrin.h: Add file missing from last commit. * config/s390/htmintrin.h: Likewise. * config/s390/s390intrin.h: Likewise. 2013-08-14 Uros Bizjak Backport from mainline 2013-08-13 Uros Bizjak * config/i386/sse.md (*sse2_maskmovdqu): Emit addr32 prefix when Pmode != word_mode. Add length_address attribute. (sse3_monitor_): Merge from sse3_monitor and sse3_monitor64_ insn patterns. Emit addr32 prefix when Pmode != word_mode. Update insn length attribute. * config/i386/i386.c (ix86_option_override_internal): Update ix86_gen_monitor selection for merged sse3_monitor insn. 2013-08-14 Jakub Jelinek Alexandre Oliva PR target/58067 * config/i386/i386.c (ix86_delegitimize_address): For CM_MEDIUM_PIC and CM_LARGE_PIC ix86_cmodel fall thru into the -m32 code, handle there also UNSPEC_PLTOFF. 2013-08-13 Jakub Jelinek PR sanitizer/56417 * asan.c (instrument_strlen_call): Fix typo in comment. Use char * type even for the lhs of POINTER_PLUS_EXPR. 2013-08-13 Vladimir Makarov Backport from mainline 2013-06-06 Vladimir Makarov PR rtl-optimization/57459 * lra-constraints.c (update_ebb_live_info): Fix typo for operand type when setting live regs. 2013-08-13 Marek Polacek Jakub Jelinek PR tree-optimization/57980 * tree-tailcall.c (process_assignment): Return false when not dealing with integers or floats. 2013-08-12 Andrew Haley Backport from mainline: * 2013-07-11 Andreas Schwab * config/aarch64/aarch64-linux.h (CPP_SPEC): Define. 2013-08-13 Uros Bizjak Backport from mainline 2013-08-12 Perez Read PR target/58132 * config/i386/i386.md (*movabs_1): Add PTR before operand 0 for intel asm alternative. (*movabs_2): Ditto for operand 1. 2013-08-09 Zhenqiang Chen Backport from mainline: 2013-08-09 Zhenqiang Chen * config/arm/neon.md (vcond): Fix floating-point vector comparisons against 0. 2013-08-08 Kyrylo Tkachov Backport from mainline: 2013-08-08 Kyrylo Tkachov * config/arm/neon.md (movmisalign): Disable when we don't allow unaligned accesses. (*movmisalign_neon_store): Likewise. (*movmisalign_neon_load): Likewise. (*movmisalign_neon_store): Likewise. (*movmisalign_neon_load): Likewise. 2013-08-06 Martin Jambor PR middle-end/58041 * gimple-ssa-strength-reduction.c (replace_ref): Make sure built MEM_REF has proper alignment information. 2013-08-05 Richard Earnshaw PR rtl-optimization/57708 * recog.c (peep2_find_free_register): Validate all regs in a multi-reg mode. 2013-08-02 Eric Botcazou * config/sparc/sparc.c (sparc_emit_membar_for_model) : Add the implied StoreLoad barrier for atomic operations if before. 2013-08-02 Andreas Krebbel Backports from mainline: 2013-06-27 Andreas Krebbel * config/s390/s390.c: Rename UNSPEC_CCU_TO_INT to UNSPEC_STRCMPCC_TO_INT and UNSPEC_CCZ_TO_INT to UNSPEC_CC_TO_INT. (struct machine_function): Add tbegin_p. (s390_canonicalize_comparison): Fold CC mode compares to conditional jump if possible. (s390_emit_jump): Return the emitted jump. (s390_branch_condition_mask, s390_branch_condition_mnemonic): Handle CCRAWmode compares. (s390_option_override): Default to -mhtm if available. (s390_reg_clobbered_rtx): Handle floating point regs as well. (s390_regs_ever_clobbered): Use s390_regs_ever_clobbered also for FPRs instead of df_regs_ever_live_p. (s390_optimize_nonescaping_tx): New function. (s390_init_frame_layout): Extend clobbered_regs array to cover FPRs as well. (s390_emit_prologue): Call s390_optimize_nonescaping_tx. (s390_expand_tbegin): New function. (enum s390_builtin): New enum definition. (code_for_builtin): New array definition. (s390_init_builtins): New function. (s390_expand_builtin): New function. (TARGET_INIT_BUILTINS): Define. (TARGET_EXPAND_BUILTIN): Define. * common/config/s390/s390-common.c (processor_flags_table): Add PF_TX. * config/s390/predicates.md (s390_comparison): Handle CCRAWmode. (s390_alc_comparison): Likewise. * config/s390/s390-modes.def: Add CCRAWmode. * config/s390/s390.h (processor_flags): Add PF_TX. (TARGET_CPU_HTM): Define macro. (TARGET_HTM): Define macro. (TARGET_CPU_CPP_BUILTINS): Define __HTM__ for htm. * config/s390/s390.md: Rename UNSPEC_CCU_TO_INT to UNSPEC_STRCMPCC_TO_INT and UNSPEC_CCZ_TO_INT to UNSPEC_CC_TO_INT. (UNSPECV_TBEGIN, UNSPECV_TBEGINC, UNSPECV_TEND, UNSPECV_TABORT) (UNSPECV_ETND, UNSPECV_NTSTG, UNSPECV_PPA): New unspecv enum values. (TBEGIN_MASK, TBEGINC_MASK): New constants. ("*cc_to_int"): Move up. ("*movcc", "*cjump_64", "*cjump_31"): Accept integer constants other than 0. ("*ccraw_to_int"): New insn and splitter definition. ("tbegin", "tbegin_nofloat", "tbegin_retry") ("tbegin_retry_nofloat", "tbeginc", "tend", "tabort") ("tx_assist"): New expander. ("tbegin_1", "tbegin_nofloat_1", "*tbeginc_1", "*tend_1") ("*tabort_1", "etnd", "ntstg", "*ppa"): New insn definition. * config/s390/s390.opt: Add -mhtm option. * config/s390/s390-protos.h (s390_emit_jump): Add return type. * config/s390/htmxlintrin.h: New file. * config/s390/htmintrin.h: New file. * config/s390/s390intrin.h: New file. * doc/extend.texi: Document htm builtins. * config.gcc: Add the new header files to extra_headers. 2013-07-17 Andreas Krebbel * config/s390/s390.c: (s390_expand_builtin): Allow -mhtm to be enabled without -march=zEC12. * config/s390/s390.h (TARGET_HTM): Do not require EC12 machine flags to be set. 2013-08-01 Ganesh Gopalasubramanian Backport from mainline 2013-05-13 Ganesh Gopalasubramanian * config/i386/i386.c (processor_target_table): Modified default alignment values for AMD BD and BT architectures. 2013-07-31 Sriraman Tallam * config/i386/i386.c (dispatch_function_versions): Fix array indexing of function_version_info to match actual_versions. 2013-07-31 Sebastian Huber * config.gcc (*-*-rtems*): Use __cxa_atexit by default. * config/rs6000/rtems.h (TARGET_LIBGCC_SDATA_SECTION): Define. 2013-07-31 Andreas Krebbel Backport from mainline 2013-03-27 Andreas Krebbel * config/s390/s390.h (TARGET_FLT_EVAL_METHOD): Define. 2013-07-23 Andreas Krebbel * config/s390/linux-unwind.h: Use the proper dwarf to hard reg mapping for FPRs when creating the fallback framestate. 2013-07-29 Dominik Vogt * config/s390/s390.md ("movcc"): Swap load and store instructions. 2013-07-25 Terry Guo Backport from mainline: 2013-07-25 Terry Guo * config/arm/arm.c (thumb1_size_rtx_costs): Assign proper cost for shift_add/shift_sub0/shift_sub1 RTXs. 2013-07-22 Iain Sandoe Backport from mainline: 2013-07-22 Uros Bizjak * config/i386/i386.md (nonlocal_goto_receiver): Delete insn if it is not needed after split. 2013-07-20 Iain Sandoe PR target/51784 * config/i386/i386.c (output_set_got) [TARGET_MACHO]: Adjust to emit a second label for nonlocal goto receivers. Don't output pic base labels unless we're producing PIC; mark that action unreachable(). (ix86_save_reg): If the function contains a nonlocal label, save the PIC base reg. * config/darwin-protos.h (machopic_should_output_picbase_label): New. * gcc/config/darwin.c (emitted_pic_label_num): New GTY. (update_pic_label_number_if_needed): New. (machopic_output_function_base_name): Adjust for nonlocal receiver case. (machopic_should_output_picbase_label): New. * config/i386/i386.md (enum unspecv): UNSPECV_NLGR: New. (nonlocal_goto_receiver): New insn and split. 2013-07-19 Wei Mi Backport from mainline: 2013-07-18 Vladimir Makarov Wei Mi PR rtl-optimization/57878 * lra-assigns.c (assign_by_spills): Move non_reload_pseudos to the top. Promote lra_assert to gcc_assert. (reload_pseudo_compare_func): Check regs first for reload pseudos. 2013-07-11 Georg-Johann Lay Backport from 2013-07-19 trunk r201051. PR target/57516 * config/avr/avr-fixed.md (round3_const): Turn expander to insn. * config/avr/avr.md (adjust_len): Add `round'. * config/avr/avr-protos.h (avr_out_round): New prototype. (avr_out_plus): Add `out_label' argument. * config/avr/avr.c (avr_out_plus_1): Add `out_label' argument. (avr_out_plus): Pass down `out_label' to avr_out_plus_1. Handle the case where `insn' is just a pattern. (avr_out_bitop): Handle the case where `insn' is just a pattern. (avr_out_round): New function. (avr_adjust_insn_length): Handle ADJUST_LEN_ROUND. 2013-07-19 Kirill Yukhin * config/i386/bmiintrin.h (_bextr_u32): New. (_bextr_u64): Ditto. (_blsi_u32): New. (_blsi_u64): Ditto. (_blsr_u32): Ditto. (_blsr_u64): Ditto. (_blsmsk_u32): Ditto. (_blsmsk_u64): Ditto. (_tzcnt_u32): Ditto. (_tzcnt_u64): Ditto. 2013-07-17 James Greenhalgh Backport From mainline: 2013-07-03 James Greenhalgh * config/aarch64/aarch64-builtins.c (aarch64_simd_expand_builtin): Handle AARCH64_SIMD_STORE1. * config/aarch64/aarch64-simd-builtins.def (ld1): New. (st1): Likewise. * config/aarch64/aarch64-simd.md (aarch64_ld1): New. (aarch64_st1): Likewise. * config/aarch64/arm_neon.h (vld1_<8, 16, 32, 64>): Convert to RTL builtins. 2013-07-11 Georg-Johann Lay Backport from 2013-07-11 trunk r200901. PR target/57631 * config/avr/avr.c (avr_set_current_function): Sanity-check signal name seen by assembler/linker if available. 2013-07-10 Georg-Johann Lay Backport from 2013-07-10 trunk r200872. PR target/57844 * config/avr/avr.c (avr_prologue_setup_frame): Trunk -size to mode of my_fp. 2013-07-10 Georg-Johann Lay Backport from 2013-07-10 trunk r200870. PR target/57506 * config/avr/avr-mcus.def (atmega16hva, atmega16hva2, atmega16hvb) (atmega16m1, atmega16u4, atmega32a, atmega32c1, atmega32hvb) (atmega32m1, atmega32u4, atmega32u6, atmega64c1, atmega64m1): Remove duplicate devices. * config/avr/gen-avr-mmcu-texi.c (print_mcus): Fail on duplicate MCUs. * config/avr/t-multilib: Regenerate. * config/avr/avr-tables.opt: Regenerate. * doc/avr-mmcu.texi: Regenerate. 2013-07-10 Georg-Johann Lay PR target/56987 * config/avr/avr.opt (Waddr-space-convert): Fix typo. 2013-07-09 Joseph Myers * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Only adjust register size for TDmode and TFmode for VSX registers. 2013-07-08 Kai Tietz Backport from mainline PR target/56892 * config/i386/i386.c (TARGET_FUNCTION_ATTRIBUTE_INLINABLE_P): Define as hook_bool_const_tree_true. 2013-07-08 Uros Bizjak Backport from mainline 2013-07-07 Uros Bizjak * config/i386/driver-i386.c (host_detect_local_cpu): Do not check signature_TM2_ebx, it interferes with signature_INTEL_ebx. Backport from mainline 2013-07-06 Uros Bizjak * config/i386/sse.md (sse_movlhps): Change alternative 3 of operand 2 to "m". 2013-07-08 Eric Botcazou * Makefile.in (tree-ssa-reassoc.o): Add dependency on $(PARAMS_H). 2013-07-08 Jakub Jelinek PR rtl-optimization/57829 * simplify-rtx.c (simplify_binary_operation_1) : Ensure that mask bits outside of mode are just sign-extension from mode to HWI. 2013-07-03 Jakub Jelinek PR target/57777 * config/i386/predicates.md (vsib_address_operand): Disallow SYMBOL_REF or LABEL_REF in parts.disp if TARGET_64BIT && flag_pic. 2013-06-30 Terry Guo Backport from mainline 2013-03-27 Bin Cheng PR target/56102 * config/arm/arm.c (thumb1_rtx_costs, thumb1_size_rtx_costs): Fix rtx costs for SET/ASHIFT/ASHIFTRT/LSHIFTRT/ROTATERT patterns with mult-word mode. 2013-06-28 Jakub Jelinek PR target/57736 * config/i386/i386.c (ix86_expand_builtin): If target == NULL and mode is VOIDmode, don't create a VOIDmode pseudo to copy result into. 2013-06-27 Jakub Jelinek PR target/57623 * config/i386/i386.md (bmi_bextr_): Swap predicates and constraints of operand 1 and 2. PR target/57623 * config/i386/i386.md (bmi2_bzhi_3): Swap AND arguments to match RTL canonicalization. Swap predicates and constraints of operand 1 and 2. * tree-vect-stmts.c (vectorizable_store): Move ptr_incr var decl before the loop, initialize to NULL. (vectorizable_load): Initialize ptr_incr to NULL. 2013-06-24 Martin Jambor PR tree-optimization/57358 * ipa-prop.c (parm_ref_data_preserved_p): Always return true when not optimizing. 2013-06-24 Alan Modra * config/rs6000/rs6000.c (vspltis_constant): Correct for little-endian. (gen_easy_altivec_constant): Likewise. * config/rs6000/predicates.md (easy_vector_constant_add_self, easy_vector_constant_msb): Likewise. 2013-06-21 Uros Bizjak Backport from mainline 2013-06-20 Uros Bizjak PR target/57655 * config/i386/i386.c (construct_container): Report error if long double is used with disabled x87 float returns. 2013-06-20 Wei Mi Backport from mainline 2013-06-19 Wei Mi PR rtl-optimization/57518 * ira.c (set_paradoxical_subreg): Set pdx_subregs[regno] if regno is used in paradoxical subreg. (update_equiv_regs): Check pdx_subregs[regno] before set a reg to be equivalent with a mem. 2013-06-20 David Edelsohn Backport from mainline 2013-06-19 David Edelsohn PR driver/57652 * collect2.c (collect_atexit): New. (collect_exit): Delete. (main): Register collect_atexit with atexit. (collect_wait): Change collect_exit to exit. (do_wait): Same. * collect2.h (collect_exit): Delete. * tlink.c (do_tlink): Rename exit to ret. Change collect_exit to exit. 2013-06-19 Matthias Klose PR driver/57651 * file-find.h (find_a_file): Add a mode parameter. * file-find.c (find_a_file): Likewise. * gcc-ar.c (main): Call find_a_file with R_OK for the plugin, with X_OK for the executables. * collect2.c (main): Call find_a_file with X_OK. 2013-06-19 Igor Zamyatin * doc/invoke.texi (core-avx2): Document. (atom): Updated with MOVBE. 2013-06-19 Jakub Jelinek PR driver/57651 * gcc-ar.c (main): If not CROSS_DIRECTORY_STRUCTURE, look for PERSONALITY in $PATH derived prefixes. 2013-06-19 Paolo Carlini PR c++/56544 * doc/cpp.texi [Standard Predefined Macros, __cplusplus]: Document that now in C++ the value is correct per the C++ standards. 2013-06-19 Alan Modra Apply mainline patches 2013-06-13 Alan Modra * config/rs6000/rs6000.h (LONG_DOUBLE_LARGE_FIRST): Define. * config/rs6000/rs6000.md (signbittf2): New insn. (extenddftf2_internal): Use LONG_DOUBLE_LARGE_FIRST. (abstf2_internal, cmptf_internal2): Likewise. * config/rs6000/spe.md (spe_abstf2_cmp, spe_abstf2_tst): Likewise. 2013-06-11 Anton Blanchard * config/rs6000/rs6000.c (rs6000_adjust_atomic_subword): Calculate correct shift value in little-endian mode. 2013-06-07 Alan Modra * config/rs6000/rs6000.c (setup_incoming_varargs): Round up va_list_gpr_size. 2013-06-04 Alan Modra * config/rs6000/rs6000.c (output_toc): Correct little-endian float constant output. 2013-05-10 Alan Modra * configure.ac (HAVE_AS_TLS): Swap powerpc64 and powerpc cases. (HAVE_LD_LARGE_TOC): Don't mention AIX in help text. * configure: Regenerate. 2013-05-09 Alan Modra * configure.ac (HAVE_AS_TLS): Enable tests for powerpcle and powerpc64le. * configure: Regenerate. 2013-05-07 Anton Blanchard * configure.ac (HAVE_LD_LARGE_TOC): Use right linker emulation for powerpc64 little endian. * configure: Regenerate. 2013-05-06 Alan Modra * config/rs6000/linux.h (DEFAULT_ASM_ENDIAN): Define. (LINK_OS_LINUX_EMUL): Use ENDIAN_SELECT. * config/rs6000/linux64.h (DEFAULT_ASM_ENDIAN): Define. * config/rs6000/sysv4le.h (DEFAULT_ASM_ENDIAN): Define. (LINK_TARGET_SPEC): Use ENDIAN_SELECT. * config/rs6000/sysv4.h (DEFAULT_ASM_ENDIAN): Define as -mbig. 2013-05-06 Alan Modra * config/rs6000/sysv4.h (ENDIAN_SELECT): Define, extracted from (ASM_SPEC): ..here. Emit DEFAULT_ASM_ENDIAN too. (DEFAULT_ASM_ENDIAN): Define. (CC1_SPEC, LINK_TARGET_SPEC): Use ENDIAN_SELECT. * config/rs6000/linux64.h (ASM_SPEC32): Remove endian options. Update -K PIC clause from sysv4.h. (ASM_SPEC_COMMON): Use ENDIAN_SELECT. (LINK_OS_LINUX_EMUL32, LINK_OS_LINUX_EMUL64): Likewise. 2013-05-06 Alan Modra * config/rs6000/rs6000.md (bswapdi 2nd splitter): Don't swap words twice for little-endian. (ashrdi3_no_power, ashrdi3): Support little-endian. 2013-04-25 Alan Modra * config.gcc: Support little-endian powerpc-linux targets. * config/rs6000/linux.h (LINK_OS_LINUX_EMUL): Define. (LINK_OS_LINUX_SPEC): Define. * config/rs6000/linuxspe.h (TARGET_DEFAULT): Preserve MASK_LITTLE_ENDIAN. * config/rs6000/default64.h (TARGET_DEFAULT): Likewise. * config/rs6000/linuxaltivec.h (TARGET_DEFAULT): Likewise. * config/rs6000/linux64.h (OPTION_LITTLE_ENDIAN): Don't zero. (LINK_OS_LINUX_EMUL32, LINK_OS_LINUX_EMUL64): Define. (LINK_OS_LINUX_SPEC32, LINK_OS_LINUX_SPEC64): Use above. * config/rs6000/rs6000.c (output_toc): Don't use .tc for TARGET_ELF. Correct fp word order for little-endian. Don't shift toc entries smaller than a word for little-endian. * config/rs6000/rs6000.md (bswaphi2, bswapsi2 split): Comment. (bswapdi2 splits): Correct low-part subreg for little-endian. Remove wrong BYTES_BIG_ENDIAN tests, and rename vars to remove low/high where such is correct only for be. * config/rs6000/sysv4.h (SUBTARGET_OVERRIDE_OPTIONS): Allow little-endian for -mcall-aixdesc. 2013-06-12 Martin Jambor * ipa-cp.c (ipa_get_indirect_edge_target_1): Check that param_index is within bounds at the beginning of the function. 2013-06-12 Jakub Jelinek PR tree-optimization/57537 * tree-vect-patterns.c (vect_recog_widen_mult_pattern): If vect_handle_widen_op_by_const, convert oprnd1 to half_type1. 2013-06-10 Uros Bizjak Backport from mainline 2013-06-10 Uros Bizjak * config/alpha/alpha.c (alpha_emit_xfloating_compare): Also use cmp_code to construct REG_EQUAL note. 2013-06-10 Oleg Endo Backport from mainline 2013-05-20 Oleg Endo PR target/56547 * config/sh/sh.md (fmasf4): Remove empty constraints strings. (*fmasf4, *fmasf4_media): New insns. 2013-06-09 Jakub Jelinek PR target/57568 * config/i386/i386.md (TARGET_READ_MODIFY_WRITE peepholes): Ensure that operands[2] doesn't overlap with operands[0]. 2013-06-07 Richard Sandiford * recog.c (offsettable_address_addr_space_p): Fix calculation of address mode. Move pointer mode initialization to the same place. 2013-06-07 Sofiane Naci Backport from mainline * config/aarch64/aarch64.md (*movdi_aarch64): Define "simd" attribute. 2013-06-07 Uros Bizjak Backport from mainline 2013-06-05 Uros Bizjak * config/alpha/alpha.c (alpha_emit_conditional_move): Swap all GE, GT, GEU and GTU compares, modulo DImode compares with zero. Backport from mainline 2013-05-23 Uros Bizjak PR target/57379 * config/alpha/alpha.md (unspec): Add UNSPEC_XFLT_COMPARE. * config/alpha/alpha.c (alpha_emit_xfloating_compare): Construct REG_EQUAL note as UNSPEC_XFLT_COMPARE unspec. 2013-06-04 Bill Schmidt Backport from mainline. 2013-05-22 Bill Schmidt * config/rs6000/rs6000.h (MALLOC_ABI_ALIGNMENT): New #define. 2013-06-03 James Greenhalgh Backport from mainline. 2013-04-25 James Greenhalgh * config/aarch64/aarch64.c (aarch64_print_operand): Fix asm_fprintf format specifier in 'X' case. 2013-05-31 Richard Henderson PR target/56742 * config/i386/i386.c (ix86_seh_fixup_eh_fallthru): New. (ix86_reorg): Call it. 2012-05-31 Jakub Jelinek * BASE-VER: Set to 4.8.2. * DEV-PHASE: Set to prerelease. 2013-05-31 Release Manager * GCC 4.8.1 released. 2013-05-24 Greta Yorsh Backport from mainline 2013-05-02 Greta Yorsh PR target/56732 * config/arm/arm.c (arm_expand_epilogue): Check really_return before generating simple_return for naked functions. 2013-05-24 Alexander Ivchenko PR tree-ssa/57385 * tree-ssa-sccvn.c (fully_constant_vn_reference_p): Check that index is not negative. 2013-05-23 Martin Jambor PR middle-end/57347 * tree.h (contains_bitfld_component_ref_p): Declare. * tree-sra.c (contains_bitfld_comp_ref_p): Move... * tree.c (contains_bitfld_component_ref_p): ...here. Adjust its caller. * ipa-prop.c (determine_known_aggregate_parts): Check that LHS does not access a bit-field. Assert all final offsets are byte-aligned. 2013-05-23 Richard Biener PR rtl-optimization/57341 * ira.c (validate_equiv_mem_from_store): Use anti_dependence instead of true_dependence. 2013-05-23 Jakub Jelinek PR middle-end/57344 * expmed.c (store_split_bit_field): If op0 is a REG or SUBREG of a REG, don't lower unit. Handle unit not being always BITS_PER_WORD. 2013-05-22 Uros Bizjak PR target/57356 * config/i386/i386.md (*movti_internal_rex64): Emit movaps/movups for non-sse2 targets. (*movti_internal): Simplify mode attribute calculation. 2013-05-22 Richard Biener Backport from mainline 2013-05-21 Richard Biener PR tree-optimization/57318 * tree-ssa-loop-ivcanon.c (tree_estimate_loop_size): Do not estimate stmts with side-effects as likely eliminated. 2013-05-21 Richard Biener PR tree-optimization/57330 * cgraph.c (cgraph_redirect_edge_call_stmt_to_callee): Properly preserve the call stmts fntype. 2013-05-21 Richard Biener PR tree-optimization/57303 * tree-ssa-sink.c (statement_sink_location): Properly handle self-assignments. 2013-05-21 Magnus Granberg PR plugins/56754 * Makefile.in (PLUGIN_HEADERS): Add $(TARGET_H). 2013-05-21 Eric Botcazou Backport from mainline 2013-05-14 Eric Botcazou * config/sparc/sp64-elf.h (CPP_SUBTARGET_SPEC): Delete. * config/sparc/openbsd64.h (CPP_SUBTARGET_SPEC): Likewise. 2013-05-17 Jakub Jelinek PR rtl-optimization/57281 PR rtl-optimization/57300 * config/i386/i386.md (extendsidi2_1 dead reg splitter): Remove. (extendsidi2_1 peephole2s): Add instead 2 new peephole2s, that undo what the other splitter did if the registers are dead. 2013-05-17 Uros Bizjak Backport from mainline 2013-05-16 Uros Bizjak * config/i386/driver-i386.c (host_detect_local_cpu): Determine cache parameters using detect_caches_amd also for CYRIX, NSC and TM2 signatures. 2013-05-16 Uros Bizjak Dzianis Kahanovich PR target/45359 PR target/46396 * config/i386/driver-i386.c (host_detect_local_cpu): Detect VIA/Centaur processors and determine their cache parameters using detect_caches_amd. 2013-05-15 Uros Bizjak * config/i386/i386.c (ix86_option_override_internal): Update processor_alias_table for missing PTA_PRFCHW and PTA_FXSR flags. Add PTA_POPCNT to corei7 entry. Do not enable SSE prefetch on non-SSE 3dNow! targets. Enable TARGET_PRFCHW for TARGET_3DNOW targets. * config/i386/i386.md (prefetch): Enable for TARGET_PRFCHW instead of TARGET_3DNOW. (*prefetch_3dnow): Enable for TARGET_PRFCHW only. 2013-05-17 Jakub Jelinek * gcc.c (SANITIZER_SPEC): Reject -fsanitize=address -fsanitize=thread linking. PR tree-optimization/57051 * fold-const.c (const_binop) : Fix BYTES_BIG_ENDIAN handling. 2013-05-16 Jakub Jelinek * omp-low.c (extract_omp_for_data): For collapsed loops, if at least one of the loops is known at compile time to iterate zero times, set count to 0. (expand_omp_regimplify_p): New function. (expand_omp_for_generic): For collapsed loops, if at least one of the loops isn't known to iterate at least once, add runtime check with setting count to 0. (expand_omp_for_static_nochunk, expand_omp_for_static_chunk): For unsigned types if it isn't known at compile time that the loop will iterate at least once, add runtime check to bypass the whole loop if initial condition isn't true. 2013-05-14 Jakub Jelinek PR middle-end/57251 * expr.c (expand_expr_real_2) : Handle the case when both op0 and op1 have VOIDmode. 2013-05-13 Jakub Jelinek PR tree-optimization/57230 * tree-ssa-strlen.c (handle_char_store): Add missing integer_zerop check. 2013-05-12 Joern Rennecke * config/epiphany/epiphany.c (epiphany_init): Check size of NUM_MODES_FOR_MODE_SWITCHING. (epiphany_expand_prologue): Remove CONFIG_REGNUM initial value handling code. (epiphany_optimize_mode_switching): Handle EPIPHANY_MSW_ENTITY_CONFIG. (epiphany_mode_needed, epiphany_mode_entry_exit): Likewise. (emit_set_fp_mode, epiphany_mode_after): Likewise. (epiphany_mode_needed) : Don't return 1 for FP_MODE_NONE. * config/epiphany/epiphany.h (NUM_MODES_FOR_MODE_SWITCHING): Add value for EPIPHANY_MSW_ENTITY_CONFIG. (EPIPHANY_MSW_ENTITY_CONFIG, EPIPHANY_MSW_ENTITY_NUM): Define. * config/epiphany/epiphany.md (save_config): New pattern. 2013-05-10 Sebastian Huber * config/arm/t-rtems-eabi: Remove mthumb/march=armv7 multilib. Add mthumb/march=armv7-a multilib. Add mthumb/march=armv7-r multilib. Add mthumb/march=armv7-a/mfpu=neon/mfloat-abi=hard multilib. 2013-05-10 Ralf Corsépius PR target/57237 * config/v850/t-rtems: Add more multilibs. 2013-05-10 Richard Biener PR tree-optimization/57214 * tree-ssa-loop-ivcanon.c (propagate_constants_for_unrolling): Do not propagate from SSA names that occur in abnormal PHI nodes. 2013-05-10 Alan Modra PR target/55033 * varasm.c (default_elf_select_section): Move !DECL_P check.. (get_named_section): ..to here before calling get_section_name. Adjust assertion. (default_section_type_flags): Add DECL_P check. * config/i386/winnt.c (i386_pe_section_type_flags): Likewise. * config/rs6000/rs6000.c (rs6000_xcoff_section_type_flags): Likewise. 2013-05-09 Joern Rennecke * config/epiphany/epiphany.c (epiphany_expand_prologue): When using gen_stack_adjust_str with a register offset, add a REG_FRAME_RELATED_EXPR note. 2013-05-09 Martin Jambor PR middle-end/56988 * ipa-prop.h (ipa_agg_replacement_value): New flag by_ref. * ipa-cp.c (find_aggregate_values_for_callers_subset): Fill in the by_ref flag of ipa_agg_replacement_value structures. (known_aggs_to_agg_replacement_list): Likewise. * ipa-prop.c (write_agg_replacement_chain): Stream by_ref flag. (read_agg_replacement_chain): Likewise. (ipcp_transform_function): Also check that by_ref flags match. 2013-05-08 Diego Novillo PR bootstrap/54659 Revert: 2012-08-17 Diego Novillo PR bootstrap/54281 * configure.ac: Add libintl.h to AC_CHECK_HEADERS list. * config.in: Regenerate. * configure: Regenerate. * intl.h: Always include libintl.h if HAVE_LIBINTL_H is set. 2013-05-08 Paolo Carlini PR tree-optimization/57200 * tree-ssa-loop-niter.c (do_warn_aggressive_loop_optimizations): Only call inform if the preceding warning_at returns true. 2013-05-07 Jakub Jelinek PR tree-optimization/57149 * tree-ssa-uninit.c (uninit_undefined_value_p): New inline. (can_skip_redundant_opnd, compute_uninit_opnds_pos, collect_phi_def_edges, execute_late_warn_uninitialized): Use uninit_undefined_value_p instead of ssa_undefined_value_p. PR debug/57184 * expr.c (expand_expr_addr_expr_1): Handle COMPOUND_LITERAL_EXPR for modifier == EXPAND_INITIALIZER. 2013-05-07 Richard Biener Backport from mainline 2013-05-06 Richard Biener PR tree-optimization/57185 * tree-parloops.c (add_field_for_reduction): Handle anonymous SSA names properly. 2013-04-19 Richard Biener PR tree-optimization/57000 * tree-ssa-reassoc.c (pass_reassoc): Add TODO_update_ssa_only_virtuals. 2013-05-06 Michael Meissner Backport from trunk 2013-05-03 Michael Meissner PR target/57150 * config/rs6000/rs6000.h (HARD_REGNO_CALLER_SAVE_MODE): Use DFmode to save TFmode registers and DImode to save TImode registers for caller save operations. (HARD_REGNO_CALL_PART_CLOBBERED): TFmode and TDmode do not need to mark being partially clobbered since they only use the first double word. * config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): TFmode and TDmode only use the upper 64-bits of each VSX register. 2013-05-06 Oleg Endo PR target/57108 * config/sh/sh.md (tstsi_t_zero_extract_eq): Use QIHISIDI mode iterator. 2013-05-06 Uros Bizjak Backport from mainline 2013-05-06 Uros Bizjak PR target/57106 * config/i386/i386.c (add_parameter_dependencies): Add dependence between "first_arg" and "insn", not "last" and "insn". 2013-05-03 Jakub Jelinek PR rtl-optimization/57130 * combine.c (make_compound_operation) : Pass SET instead of COMPARE as in_code to the recursive call if needed. Backported from mainline 2013-04-26 Jakub Jelinek PR tree-optimization/57051 * fold-const.c (const_binop): Handle VEC_LSHIFT_EXPR and VEC_RSHIFT_EXPR if shift count is a multiple of element bitsize. 2013-04-12 Marc Glisse * fold-const.c (fold_binary_loc): Call const_binop also for mixed vector-scalar operations. 2013-05-03 Marek Polacek Backport from mainline 2013-04-25 Marek Polacek PR tree-optimization/57066 * builtins.c (fold_builtin_logb): Return +Inf for -Inf. 2013-05-02 Vladimir Makarov Backport from mainline 2013-05-02 Vladimir Makarov * lra-constraints.c (process_alt_operands): Add checking alt number to choose the best alternative. 2013-05-01 Vladimir Makarov PR target/57091 * lra-constraints.c (best_small_class_operands_num): Remove. (process_alt_operands): Remove small_class_operands_num. Take small classes operands into losers and only if the operand is not matched. Modify debugging output. (curr_insn_transform): Remove best_small_class_operands_num. Print insn name. 2013-05-02 Vladimir Makarov Backport from mainline 2013-04-29 Vladimir Makarov PR target/57097 * lra-constraints.c (process_alt_operands): Discourage a bit more using memory for pseudos. Print cost dump for alternatives. Modify cost values for conflicts with early clobbers. (curr_insn_transform): Spill pseudos reassigned to NO_REGS. 2013-05-02 Vladimir Makarov Backport from mainline 2013-04-24 Vladimir Makarov PR rtl-optimizations/57046 * lra-constraints (split_reg): Set up lra_risky_transformations_p for multi-reg splits. 2013-05-02 Vladimir Makarov Backport from mainline 2013-04-22 Vladimir Makarov PR target/57018 * lra-eliminations.c (mark_not_eliminable): Prevent elimination of a set sp if no stack realignment. 2013-05-02 Vladimir Makarov Backport from mainline 2013-04-18 Vladimir Makarov PR rtl-optimization/56999 * lra-coalesce.c (coalescable_pseudo_p): Remove 2nd parameter and related code. (lra_coalesce): Remove split_origin_bitmap and related code. * lra.c (lra): Coalesce after undoing inheritance. Recreate live ranges if necessary. 2013-05-02 Vladimir Makarov Backport from mainline 2013-04-19 Vladimir Makarov PR rtl-optimization/56847 * lra-constraints.c (process_alt_operands): Discourage alternative with non-matche doffsettable memory constraint fro memory with known offset. 2013-05-02 Ian Bolton Backport from mainline 2013-03-28 Ian Bolton * config/aarch64/aarch64.md (aarch64_can_eliminate): Keep frame record only when desired or required. 2013-04-30 Jakub Jelinek PR tree-optimization/57104 * tsan.c (instrument_expr): Don't instrument accesses to DECL_HARD_REGISTER VAR_DECLs. 2013-04-30 Uros Bizjak Backport from mainline 2013-04-29 Uros Bizjak PR target/44578 * config/i386/i386.md (*zero_extendsidi2_rex64): Add "!" to m->?*y alternative. (*zero_extendsidi2): Ditto. Backport from mainline 2013-04-29 Uros Bizjak PR target/57098 * config/i386/i386.c (ix86_expand_vec_perm): Validize constant memory. 2013-04-29 Richard Biener PR middle-end/57103 * tree-cfg.c (move_stmt_op): Fix condition under which to update TREE_BLOCK. (move_stmt_r): Remove redundant checking. 2013-04-29 Christian Bruel PR target/57108 * sh.md (tstsi_t_zero_extract_eq): Set mode for operand 0. 2013-04-29 Jakub Jelinek PR tree-optimization/57083 * tree-vrp.c (extract_range_from_binary_expr_1): For LSHIFT_EXPR with non-singleton shift count range, zero extend low_bound for uns case. 2013-04-28 Eric Botcazou * stor-layout.c (finalize_size_functions): Allocate a structure and reset cfun before dumping the functions. 2013-04-27 Jakub Jelinek PR target/56866 * config/i386/i386.c (ix86_expand_mul_widen_evenodd): Don't use xop_pmacsdqh if uns_p. * config/i386/sse.md (xop_rotr3): Fix up computation of the immediate rotate count. 2013-04-25 Jakub Jelinek PR rtl-optimization/57003 * regcprop.c (copyprop_hardreg_forward_1): If ksvd.ignore_set_reg, call note_stores with kill_clobbered_value callback again after killing regs_invalidated_by_call. 2013-04-25 Ian Bolton Backported from mainline. 2013-03-22 Ian Bolton * config/aarch64/aarch64.c (aarch64_print_operand): New format specifier for printing a constant in hex. * config/aarch64/aarch64.md (insv_imm): Use the X format specifier for printing second operand. 2013-04-24 James Greenhalgh Backported from mainline. 2013-04-24 James Greenhalgh * config/aarch64/arm_neon.h (vld1_lane*): Fix constraints. (vld1_dup_<8, 16, 32, 64>): Likewise. (vld1_<8, 16, 32, 64>): Likewise. 2013-04-24 Greta Yorsh Backported from mainline. PR target/56797 * config/arm/arm.c (load_multiple_sequence): Require SP as base register for loads if SP is in the register list. 2013-04-23 Bill Schmidt Steven Bosscher Backported from mainline. PR rtl-optimization/56605 * loop-iv.c (implies_p): Handle equal RTXs and subregs. 2013-04-22 Marek Polacek Backported from mainline. 2013-04-22 Marek Polacek PR sanitizer/56990 * tsan.c (instrument_expr): Don't instrument expression in case its size is zero. 2013-04-22 Yufeng Zhang Backported from mainline. 2013-04-10 Yufeng Zhang * config/aarch64/aarch64.c (aarch64_print_extension): New function. (aarch64_start_file): Use the new function. 2013-04-18 Jakub Jelinek PR tree-optimization/56984 * tree-vrp.c (register_edge_assert_for_2): For (x >> M) < N and (x >> M) >= N don't register any assertion if N << M is the minimum value. 2013-04-17 David Edelsohn PR target/56948 * config/rs6000/vsx.md (vsx_mov): Add j->r alternative. 2013-04-15 Jakub Jelinek PR tree-optimization/56962 * gimple-ssa-strength-reduction.c (record_increment): Only set initializer if gimple_assign_rhs_code is {,POINTER_}PLUS_EXPR and either rhs1 or rhs2 is equal to c->base_expr. 2013-04-15 Andreas Krebbel * emit-rtl.c (reset_all_used_flags): New function. (verify_rtl_sharing): Call reset_all_used_flags before and after performing the checks. 2013-04-15 Eric Botcazou PR target/56890 * config/sparc/sparc.c (enum sparc_mode_class): Add H_MODE value. (S_MODES): Set H_MODE bit. (SF_MODES): Set only S_MODE and SF_MODE bits. (DF_MODES): Set SF_MODES and only D_MODE and DF_MODE bits. (sparc_init_modes) : Set H_MODE bit for sub-word modes. : Do not set SF_MODE for sub-word modes. : Likewise. 2013-04-12 Vladimir Makarov PR target/56903 * config/i386/i386.c (ix86_hard_regno_mode_ok): Add lra_in_progress for return. 2013-04-12 Jakub Jelinek PR tree-optimization/56918 PR tree-optimization/56920 * fold-const.c (int_const_binop_1): Use op1.mul_with_sign (op2, ...) instead of op1 - op2. Pass 2 * TYPE_PRECISION (type) as second argument to rshift method. 2013-04-12 Andreas Krebbel * ifcvt.c (end_ifcvt_sequence): Mark a and b for unsharing as well. 2013-04-11 Marek Polacek PR tree-optimization/48184 * params.def (PARAM_ALIGN_THRESHOLD): Increase the minimum value to 1. 2013-04-11 James Greenhalgh Backported from mainline. 2013-04-11 James Greenhalgh * config/aarch64/aarch64-simd.md (aarch64_vcond_internal): Fix floating-point vector comparisons against 0. 2013-04-11 Jakub Jelinek PR tree-optimization/56899 * fold-const.c (extract_muldiv_1): Apply distributive law only if TYPE_OVERFLOW_WRAPS (ctype). 2013-04-10 David S. Miller * config/sparc/sparc.h (ASM_CPU_SPEC): Pass -Av8 if -mcpu=supersparc or -mcpu=hypersparc. 2013-04-10 Jakub Jelinek Backported from mainline 2013-04-09 Jakub Jelinek PR middle-end/56883 * omp-low.c (expand_omp_for_generic, expand_omp_for_static_nochunk, expand_omp_for_static_chunk): Use simple_p = true in force_gimple_operand_gsi calls when assigning to addressable decls. 2013-04-09 Marek Polacek PR tree-optimization/48762 * params.def (PARAM_MAX_CSE_INSNS): Increase the minimum value to 1. 2013-04-08 Andreas Krebbel * config/s390/s390.c (s390_expand_insv): Only accept insertions within mode size. 2013-04-08 Marek Polacek PR rtl-optimization/48182 * params.def (PARAM_MIN_CROSSJUMP_INSNS): Increase the minimum value to 1. 2013-04-06 John David Anglin PR target/55487 * config/pa/pa.c (legitimize_pic_address): Before incrementing label nuses, make sure we have a label. 2013-04-04 Ian Lance Taylor Backport from mainline: * doc/standards.texi (Standards): The Go frontend supports the Go 1 language standard. 2013-04-04 Marek Polacek Backport from mainline: 2013-04-04 Marek Polacek PR tree-optimization/48186 * predict.c (maybe_hot_frequency_p): Return false if HOT_BB_FREQUENCY_FRACTION is 0. (cgraph_maybe_hot_edge_p): Likewise. 2013-04-04 Kyrylo Tkachov Backport from mainline: 2013-03-25 Kyrylo Tkachov PR target/56720 * config/arm/iterators.md (v_cmp_result): New mode attribute. * config/arm/neon.md (vcond): Handle unordered cases. 2013-04-04 Richard Biener PR tree-optimization/56837 * tree-loop-distribution.c (classify_partition): For non-zero values require that the value has the same precision as its mode to be useful as memset value. 2013-04-03 Roland McGrath Backport from mainline: 2013-03-26 Roland McGrath * config/arm/arm.c (arm_print_operand: case 'w'): Use fputs rather than fprintf with a non-constant, non-format string. 2013-04-03 Marek Polacek Backport from mainline: 2013-04-03 Marek Polacek PR sanitizer/55702 * tsan.c (instrument_func_exit): Allow BUILT_IN_RETURN functions. 2013-04-03 Richard Biener PR tree-optimization/56817 * tree-ssa-loop-ivcanon.c (tree_unroll_loops_completely): Split out ... (tree_unroll_loops_completely_1): ... new function to manually walk the loop tree, properly defering outer loops of unrolled loops to later iterations. 2013-04-02 Jakub Jelinek PR rtl-optimization/56745 * ifcvt.c (cond_exec_find_if_block): Don't try to optimize if then_bb has no successors and else_bb is EXIT_BLOCK_PTR. 2013-04-02 Wei Mi * config/i386/i386.c (ix86_rtx_costs): Set proper rtx cost for ashl3_mask, *3_mask and *3_mask in i386.md. 2013-04-01 Wei Mi * config/i386/i386.md (*ashl3_mask): Rewrite as define_insn. Truncate operand 2 using %b asm operand modifier. (*3_mask): Ditto. (*3_mask): Ditto. 2013-04-01 Uros Bizjak * config/i386/i386.md (*movsf_internal): Change type of alternatives 3,4 to imov. 2013-03-29 Paolo Carlini PR lto/56777 * doc/invoke.texi ([-fwhole-program]): Fix typo. 2013-03-29 Kirill Yukhin * config/i386/avx2intrin.h (_mm256_broadcastsi128_si256): Fix declaration name. 2013-03-28 Gerald Pfeifer * doc/invoke.texi (AVR Options): Tweak link for AVR-LibC user manual. * doc/extend.texi (Named Address Spaces): Ditto. (Variable Attributes): Ditto. 2013-03-28 Eric Botcazou * toplev.c (process_options): Do not disable -fomit-frame-pointer on a general basis if unwind info is requested and ACCUMULATE_OUTGOING_ARGS is not enabled. 2013-03-27 Walter Lee Backport from mainline: 2013-03-27 Walter Lee * config/tilegx/tilegx.c (tilegx_expand_prologue): Avoid double-decrement of next_scratch_regno. 2013-03-27 Walter Lee Backport from mainline: 2013-03-27 Walter Lee * config/tilegx/tilegx.md (insn_v1mulu): Fix predicates on input operands. (insn_v1mulus): Ditto. (insn_v2muls): Ditto. 2013-03-27 Walter Lee Backport from mainline: 2013-03-27 Walter Lee * config/tilegx/tilegx.h (ASM_OUTPUT_ADDR_VEC_ELT): Delete extra tab. (ASM_OUTPUT_ADDR_DIFF_ELT): Ditto. 2013-03-27 Walter Lee Backport from mainline: 2013-03-27 Walter Lee * config/tilegx/tilegx.md (*sibcall_insn): Fix type atribute for jr. (*sibcall_value): Ditto. 2013-03-27 Walter Lee Backport from mainline: 2013-03-27 Walter Lee * config/tilegx/tilegx.md (insn_mnz_): Replaced by ... (insn_mnz_v8qi): ... this ... (insn_mnz_v4hi): ... and this. Replace (const_int 0) with the vector equivalent. (insn_vmnz): Replaced by ... (insn_v1mnz): ... this ... (insn_v2mnz): ... and this. Replace (const_int 0) with the vector equivalent. (insn_mz_): Replaced by ... (insn_mz_v8qi): ... this ... (insn_mz_v4hi): ... and this. Replace (const_int 0) with the vector equivalent. (insn_vmz): Replaced by ... (insn_v1mz): ... this ... (insn_v2mz): ... and this. Replace (const_int 0) with the vector equivalent. 2013-03-26 Eric Botcazou * doc/invoke.texi (SPARC options): Remove -mlittle-endian. 2013-03-26 Sebastian Huber * config/rtems.opt: Add -pthread option. 2013-03-26 Sofiane Naci * config/aarch64/aarch64.c (aarch64_classify_address): Support PC-relative load in SI modes and above only. 2013-03-26 Walter Lee Backport from mainline: 2013-03-26 Walter Lee * config/tilegx/tilegx.h (PROFILE_BEFORE_PROLOGUE): Define. * config/tilegx/tilepro.h (PROFILE_BEFORE_PROLOGUE): Define. 2013-03-26 Walter Lee Backport from mainline: 2013-03-25 Walter Lee * config/tilegx/tilegx-builtins.h (enum tilegx_builtin): Add TILEGX_INSN_SHUFFLEBYTES1. * config/tilegx/tilegx.c (tilegx_builtin_info): Add entry for shufflebytes1. (tilegx_builtins): Ditto. * config/tilegx/tilegx.md (insn_shufflebytes1): New pattern. 2013-03-26 Walter Lee Backport from mainline: 2013-03-25 Walter Lee * config/tilegx/tilegx.c (expand_set_cint64_one_inst): Inline tests for constraint J, K, N, P. 2013-03-26 Walter Lee Backport from mainline: 2013-03-25 Walter Lee * config/tilegx/tilegx.c (tilegx_asm_preferred_eh_data_format): Use indirect/pcrel encoding. * config/tilepro/tilepro.c (tilepro_asm_preferred_eh_data_format): Ditto. 2013-03-25 Richard Biener PR middle-end/56694 * tree-eh.c (lower_eh_must_not_throw): Strip BLOCKs from the must-not-throw stmt location. 2012-03-22 Jakub Jelinek * BASE-VER: Set to 4.8.1. * DEV-PHASE: Set to prerelease. 2013-03-22 Release Manager * GCC 4.8.0 released. 2013-03-21 Walter Lee * config/tilegx/sync.md (atomic_test_and_set): New pattern. 2013-03-21 Mark Wielaard * dwarf2out.c (size_of_aranges): Skip DECL_IGNORED_P functions. 2013-03-20 Richard Biener PR tree-optimization/56661 * tree-ssa-sccvn.c (visit_use): Only value-number calls if the result does not have to be distinct. 2013-03-20 Jakub Jelinek PR tree-optimization/56635 * tree-ssa-phiopt.c (cond_if_else_store_replacement_1): Give up if lhs of then_assign and else_assign don't have compatible types. 2013-03-17 Jakub Jelinek PR target/56640 * config/arm/arm.h (REG_CLASS_NAMES): Add "SFP_REG" and "AFP_REG" class names. Remove trailing comma after "ALL_REGS". 2013-03-16 Jakub Jelinek * DEV-PHASE: Set to prerelease. 2013-03-14 Andi Kleen PR target/56619 * doc/extend.texi: Document __ATOMIC_HLE_ACQUIRE, __ATOMIC_HLE_RELEASE. Document __builtin_ia32 TSX intrincs. Document _x* TSX intrinsics. 2013-03-14 Edgar E. Iglesias David Holsgrove * configure.ac: Add MicroBlaze TLS support detection. * configure: Regenerate. * config/microblaze/microblaze-protos.h (microblaze_cannot_force_const_mem, microblaze_tls_referenced_p, symbol_mentioned_p, label_mentioned_p): Add prototypes. * config/microblaze/microblaze.c (microblaze_address_type): Add ADDRESS_TLS and tls_reloc address types. (microblaze_address_info): Add tls_reloc. (TARGET_HAVE_TLS): Define. (get_tls_get_addr, microblaze_tls_symbol_p, microblaze_tls_operand_p_1, microblaze_tls_referenced_p, microblaze_cannot_force_const_mem, symbol_mentioned_p, label_mentioned_p, tls_mentioned_p, load_tls_operand, microblaze_call_tls_get_addr, microblaze_legitimize_tls_address): New functions. (microblaze_classify_unspec): Handle UNSPEC_TLS. (get_base_reg): Use microblaze_tls_symbol_p. (microblaze_classify_address): Handle TLS. (microblaze_legitimate_pic_operand): Use symbol_mentioned_p, label_mentioned_p and microblaze_tls_referenced_p. (microblaze_legitimize_address): Handle TLS. (microblaze_address_insns): Handle ADDRESS_TLS. (pic_address_needs_scratch): Handle TLS. (print_operand_address): Handle TLS. (microblaze_expand_prologue): Check TLS_NEEDS_GOT. (microblaze_expand_move): Handle TLS. (microblaze_legitimate_constant_p): Check microblaze_cannot_force_const_mem and microblaze_tls_symbol_p. (TARGET_CANNOT_FORCE_CONST_MEM): Define. * config/microblaze/microblaze.h (TLS_NEEDS_GOT): Define (PIC_OFFSET_TABLE_REGNUM): Set. * config/microblaze/linux.h (TLS_NEEDS_GOT): Define. * config/microblaze/microblaze.md (UNSPEC_TLS): Define. (addsi3, movsi_internal2, movdf_internal): Update constraints * config/microblaze/predicates.md (arith_plus_operand): Define (move_operand): Redefine as move_src_operand, check microblaze_tls_referenced_p. 2013-03-14 Ian Bolton * config/aarch64/aarch64.md: (*and3nr_compare0): Use CC_NZ. (*and_3nr_compare0): Likewise. 2013-03-14 Ian Bolton * config/aarch64/aarch64.c (aarch64_select_cc_mode): Return correct CC mode for AND. 2013-03-14 Jakub Jelinek PR tree-optimization/53265 * common.opt (Waggressive-loop-optimizations): New option. * tree-ssa-loop-niter.c: Include tree-pass.h. (do_warn_aggressive_loop_optimizations): New function. (record_estimate): Call it. Don't add !is_exit bounds to loop->bounds if number_of_latch_executions returned constant. (estimate_numbers_of_iterations_loop): Call number_of_latch_executions early. If number_of_latch_executions returned constant, set nb_iterations_upper_bound back to it. * cfgloop.h (struct loop): Add warned_aggressive_loop_optimizations field. * Makefile.in (tree-ssa-loop-niter.o): Depend on $(TREE_PASS_H). * doc/invoke.texi (-Wno-aggressive-loop-optimizations): Document. * config/aarch64/t-aarch64-linux (MULTARCH_DIRNAME): Remove. (MULTILIB_OSDIRNAMES): Set. * genmultilib: If defaultosdirname doesn't start with :: , set defaultosdirname2 instead, clear it and emit two . multilib_raw entries instead of just one. 2013-03-14 Kaz Kojima * config/sh/linux.h (TARGET_DEFAULT): Remove MASK_USERMODE. (SUBTARGET_OVERRIDE_OPTIONS): Set TARGET_USERMODE as default. * config/sh/netbsd-elf.h (TARGET_DEFAULT): Remove MASK_USERMODE. (SUBTARGET_OVERRIDE_OPTIONS): New. 2013-03-13 Oleg Endo PR target/49880 * config/sh/sh.opt (FPU_SINGLE_ONLY): New mask. (musermode): Convert to Var(TARGET_USERMODE). * config/sh/sh.h (SELECT_SH2A_SINGLE_ONLY, SELECT_SH4_SINGLE_ONLY, MASK_ARCH): Add MASK_FPU_SINGLE_ONLY. * config/sh/sh.c (sh_option_override): Use TARGET_FPU_DOUBLE || TARGET_FPU_SINGLE_ONLY for call-fp case. * config/sh/sh.md (udivsi3_i1, divsi3_i1): Remove ! TARGET_SH4 condition. (udivsi3_i4, divsi3_i4): Use TARGET_FPU_DOUBLE condition instead of TARGET_SH4. (udivsi3_i4_single, divsi3_i4_single): Use TARGET_FPU_SINGLE_ONLY || TARGET_FPU_DOUBLE instead of TARGET_HARD_SH4. 2013-03-13 Dave Korn * config/i386/cygwin.h (SHARED_LIBGCC_SPEC): Make shared libgcc the default setting. 2013-03-13 Richard Biener PR tree-optimization/56608 * tree-vect-slp.c (vect_schedule_slp): Do not remove scalar calls when vectorizing basic-blocks. 2013-03-13 Jakub Jelinek PR plugins/45078 * config.gcc: On arm, mips, sh and sparc add vxworks-dummy.h to tm_file. 2013-03-12 Jakub Jelinek * doc/invoke.texi (-Waddr-space-convert): Move into the table earlier. 2013-03-11 Jan Hubicka PR lto/56557 * lto-streamer-out.c (output_symbol_p): Skip references from constructors of external variables. 2013-03-11 Jan Hubicka PR middle-end/56571 * valtrack.c (cleanup_auto_inc_dec): Unshare clobbers originating from pseudos. * emit-rtl.c (verify_rtx_sharing): Likewise. (copy_insn_1): Likewise. * rtl.c (copy_rtx): Likewise. 2013-03-11 Georg-Johann Lay PR target/56591 * config/avr/avr.c (avr_print_operand): Add space after '%c' in output_operand_lossage message. 2013-03-11 Richard Earnshaw PR target/56470 * arm.c (shift_op): Validate RTL pattern on the fly. (arm_print_operand, case 'S'): Don't use shift_operator to validate the RTL. 2013-03-10 John David Anglin PR target/56347 * config/pa/pa.md (call_value): Check for calls to powf and direct to new call patterns that clobber %fr12. (call_val_powf, call_val_powf_pic, call_val_powf_64bit): New insn, split and postreload patterns. * config/pa/pa.c (pa_conditional_register_usage): Revert marking registers %fr12 and %fr12R as call used. 2013-03-09 Steven Bosscher * dse.c (delete_dead_store_insn): Respect TDF_DETAILS. (canon_address, record_store, replace_read, check_mem_read_rtx, scan_insn, dse_step1, dse_step2_init, dse_step2_spill, dse_step4, dse_step5_nospill, dse_step5_spill, dse_step6, rest_of_handle_dse): Likewise. 2013-03-09 Richard Sandiford PR middle-end/56524 * tree.h (tree_optimization_option): Rename target_optabs to optabs. Add base_optabs. (TREE_OPTIMIZATION_OPTABS): Update after previous field change. (TREE_OPTIMIZATION_BASE_OPTABS): New macro. (save_optabs_if_changed): Replace with... (init_tree_optimization_optabs): ...this. * optabs.c (save_optabs_if_changed): Rename to... (init_tree_optimization_optabs): ...this. Take the optimization node as argument. Do nothing if the base optabs are already correct. Reuse the existing TREE_OPTIMIZATION_OPTABS memory if we need to recompute optabs. * function.h (function): Remove optabs field. * function.c (invoke_set_current_function_hook): Call init_tree_optimization_optabs. Use the result to initialize this_fn_optabs. 2013-02-27 Aldy Hernandez * trans-mem.c (expand_transaction): Do not set PR_INSTRUMENTEDCODE if GTMA_HAS_NO_INSTRUMENTATION. (generate_tm_state): Keep GTMA_HAS_NO_INSTRUMENTATION bit. (ipa_tm_transform_transaction): Set GTMA_HAS_NO_INSTRUMENTATION. * gimple.h (GTMA_HAS_NO_INSTRUMENTATION): Define. * gimple-pretty-print.c (dump_gimple_transaction): Handle GTMA_HAS_NO_INSTRUMENTATION. 2013-03-08 Jakub Jelinek * config/gnu-user.h (LIBTSAN_EARLY_SPEC): Don't link against libasan_preinit.o. 2013-03-08 Marek Polacek Jakub Jelinek PR tree-optimization/56478 * predict.c (is_comparison_with_loop_invariant_p): Change the type of loop_step to tree. (predict_loops): Adjust. (predict_iv_comparison): Perform the computations on double_ints. 2013-03-08 Richard Biener PR tree-optimization/56570 * tree-cfg.c (verify_expr_location_1): Verify locations for DECL_DEBUG_EXPR. * tree-sra.c (create_access_replacement): Strip locations from DECL_DEBUG_EXPRs. 2013-03-08 Richard Biener * tree-inline.c (expand_call_inline): Do not associate a BLOCK with the location in BLOCK_SOURCE_LOCATION. * tree-cfg.c (verify_location): Verify BLOCK_SOURCE_LOCATION. 2013-03-08 Richard Biener * tree-ssa-ter.c (is_replaceable_p): Do not TER across location or block changes with -Og. Fix for location / block encoding changes and PHI arguments with locations. 2013-03-07 Steven Bosscher * bitmap.c (struct bitmap_descriptor_d): Use unsigned HOST_WIDEST_INT for all counters. (struct output_info): Likewise. (register_overhead): Remove bad gcc_assert. (bitmap_find_bit): If there is only a single bitmap element, do not count a miss as a search. (print_statistics): Update for counter type changes. (dump_bitmap_statistics): Likewise. Print headers such that they are properly lined up with the printed counters. 2013-03-07 Jakub Jelinek PR tree-optimization/56559 * tree-ssa-reassoc.c (zero_one_operation): When looking at rhs2, check that it has only a single use. 2013-03-07 Richard Biener * doc/invoke.texi (fwhole-program): Discourage use in combination with -flto. 2013-03-06 Jakub Jelinek * config/arm/t-arm (TM_H, OPTIONS_H_EXTRA): Add arm-cores.def. PR tree-optimization/56539 * tree-tailcall.c (adjust_return_value_with_ops): Use GSI_SAME_STMT instead of GSI_CONTINUE_LINKING as last argument to force_gimple_operand_gsi. Adjust function comment. * config/aarch64/t-aarch64 (TM_H, OPTIONS_H_EXTRA): Add aarch64-cores.def. PR middle-end/56548 * expr.c (expand_cond_expr_using_cmove): When expanding cmove in promoted mode, convert the result back to the original mode. 2013-03-06 Richard Biener PR middle-end/56294 * tree-into-ssa.c (insert_phi_nodes_for): Add dumping. (insert_updated_phi_nodes_compare_uids): New function. (update_ssa): Sort symbols_to_rename after UID before traversing it to insert PHI nodes. 2013-03-06 Richard Biener PR middle-end/50494 * tree-vect-data-refs.c (vect_can_force_dr_alignment_p): Do not adjust alignment of DECL_IN_CONSTANT_POOL decls. Revert 2013-02-13 Richard Biener PR lto/50494 * varasm.c (output_constant_def_1): Get the decl representing the constant as argument. (output_constant_def): Wrap output_constant_def_1. (make_decl_rtl): Use output_constant_def_1 with the decl representing the constant. (build_constant_desc): Optionally re-use a decl already representing the constant. (tree_output_constant_def): Adjust. 2013-03-06 Joey Ye PR lto/50293 * gcc.c (convert_white_space): New function. (main): Handles white space in function name. 2013-03-06 Oleg Endo PR target/56529 * config/sh/sh.c (sh_option_override): Check for TARGET_DYNSHIFT instead of TARGET_SH2 for call-table case. Do not set sh_div_strategy to SH_DIV_CALL_TABLE for TARGET_SH2. * config.gcc (sh_multilibs): Add m2 and m2a to sh*-*-linux* multilib list. * doc/invoke.texi (SH options): Document mdiv= call-div1, call-fp, call-table options. 2013-03-05 Sterling Augustine Cary Coutant PR debug/55364 * dwarf2out.c (resolve_addr): Don't call remove_loc_list_addr_table_entries a second time for the same expression. 2013-03-05 Jakub Jelinek PR debug/56510 * cfgexpand.c (expand_debug_parm_decl): Call copy_rtx on incoming. (avoid_complex_debug_insns): New function. (expand_debug_locations): Call it. PR rtl-optimization/56484 * ifcvt.c (noce_process_if_block): If else_bb is NULL, avoid extending lifetimes of hard registers on small register class machines. 2013-03-05 David Holsgrove * config/microblaze/microblaze-protos.h: Rename microblaze_is_interrupt_handler to microblaze_is_interrupt_variant. * config/microblaze/microblaze.c (microblaze_attribute_table): Add fast_interrupt. (microblaze_fast_interrupt_function_p): New function. (microblaze_is_interrupt_handler): Rename to microblaze_is_interrupt_variant and add fast_interrupt check. (microblaze_must_save_register): Use microblaze_is_interrupt_variant. (save_restore_insns): Likewise. (compute_frame_size): Likewise. (microblaze_function_prologue): Add FAST_INTERRUPT_NAME. (microblaze_globalize_label): Likewise. * config/microblaze/microblaze.h: Define FAST_INTERRUPT_NAME. * config/microblaze/microblaze.md: Use wrapper microblaze_is_interrupt_variant. 2013-03-05 Kai Tietz * sdbout.c (sdbout_one_type): Switch to current function's section supporting cold/hot. 2013-03-05 David Holsgrove * doc/invoke.texi (MicroBlaze): Add -mbig-endian, -mlittle-endian, -mxl-reorder. 2013-03-05 Jakub Jelinek PR middle-end/56461 * ggc-common.c (gt_pch_save): For ENABLE_VALGRIND_CHECKING, if VALGRIND_GET_VBITS is defined, temporarily make object memory all defined, and restore previous valgrind addressability and definability afterwards. Free this_object at the end. PR middle-end/56461 * lra.c (lra): Call lra_clear_live_ranges if live_p, right before calling lra_create_live_ranges, also call it when clearing live_p. Only call lra_clear_live_ranges at the end if live_p. PR middle-end/56461 * sched-deps.c (delete_dep_node): Free DEP_REPLACE. 2013-03-05 Richard Biener PR tree-optimization/56521 * tree-ssa-sccvn.c (set_value_id_for_result): Always initialize value-id. 2013-03-05 Steven Bosscher PR c++/55135 * except.h (remove_unreachable_eh_regions): New prototype. * except.c (remove_eh_handler_splicer): New function, split out of remove_eh_handler. (remove_eh_handler): Use remove_eh_handler_splicer. Add comment warning about running it on many EH regions one at a time. (remove_unreachable_eh_regions_worker): New function, walk the EH tree in depth-first order and remove non-marked regions. (remove_unreachable_eh_regions): New function. * tree-eh.c (mark_reachable_handlers): New function, split out from remove_unreachable_handlers. (remove_unreachable_handlers): Use mark_reachable_handlers and remove_unreachable_eh_regions. (remove_unreachable_handlers_no_lp): Use mark_reachable_handlers and remove_unreachable_eh_regions. 2013-03-05 Richard Biener PR middle-end/56525 * loop-init.c (fix_loop_structure): Remove loops in two stages, not freeing them until the end. 2013-03-05 Andreas Krebbel * config/s390/s390.h: Define DWARF2_ASM_LINE_DEBUG_INFO. 2013-03-05 Richard Biener PR tree-optimization/56270 * tree-vect-slp.c (vect_schedule_slp): Clear vectorized stmts of loads after scheduling an SLP instance. 2013-03-05 Jakub Jelinek * Makefile.in (dg_target_exps): Add aarch64.exp, epiphany.exp and tic6x.exp. (check_gcc_parallelize): Run guality.exp as a separate job from vect.exp with unsorted.exp and $(dg_target_exps) separately from struct-layout-1.exp with stackalign.exp. * alias.c (init_alias_analysis): Clear reg_known_equiv_p bitmap. PR middle-end/56461 * tree-vect-slp.c (vect_supported_load_permutation_p): Free load_index sbitmap even if some bit in it isn't set. PR middle-end/56461 * tree-ssa-loop-niter.c (bb_queue): Remove typedef. (discover_iteration_bound_by_body_walk): Change queues to vec > and queue to vec. Fix up spelling in comment. Call safe_push on queues[bound_index] directly. Release queues[queue_index] in every iteration unconditionally. Release bounds vector. PR middle-end/56461 * tree-vect-stmts.c (free_stmt_vec_info_vec): Call free_stmt_vec_info on any left-over stmt_vec_info in the vector. * tree-vect-loop.c (vect_create_epilog_for_reduction): Release inner_phis vector. 2013-03-05 Richard Biener PR lto/56515 * tree-inline.c (remap_blocks_to_null): New function. (expand_call_inline): When expanding a call stmt without an associated block inline remap all callee blocks to NULL. 2013-03-05 Jakub Jelinek PR rtl-optimization/56494 * simplify-rtx.c (simplify_truncation): If C is narrower than A, optimize (truncate:A (subreg:B (truncate:C X) 0)) into (subreg:A (truncate:C X) 0) instead of (truncate:A X). PR middle-end/56461 * sel-sched-ir.c (free_sched_pools): Release succs_info_pool.stack[succs_info_pool.max_top] vectors too if succs_info_pool.max_top isn't -1. PR bootstrap/56509 * opts.c (opts_obstack, opts_concat): Moved to... * opts-common.c (opts_obstack, opts_concat): ... here. 2013-03-04 Jakub Jelinek PR middle-end/56461 * diagnostic.c (diagnostic_append_note): Save and restore old prefix. 2013-03-04 Martin Jambor * tree-dfa.c (get_or_create_ssa_default_def): Use parameter fn in all appropriate places. 2013-01-04 Eric Botcazou PR tree-optimization/56424 * ipa-split.c (split_function): Do not set the RSO flag if result is not by reference and its type is a register type. 2013-03-04 David Holsgrove * config/microblaze/microblaze.c (microblaze_valid_pic_const): New. (microblaze_legitimate_pic_operand): Likewise. * config/microblaze/microblaze.h (LEGITIMATE_PIC_OPERAND_P): Call new function microblaze_legitimate_pic_operand. * config/microblaze/microblaze-protos.h (microblaze_legitimate_pic_operand): Declare. 2013-03-04 Edgar E. Iglesias * config/microblaze/predicates.md (call_insn_simple_operand): New predicate for supported rtx code types. * config/microblaze/microblaze.md (call_internal1): Use call_insn_simple_operand predicate. 2013-03-04 Jakub Jelinek PR middle-end/56461 * tree-loop-distribution.c (ldist_gen): Call partition_free after each partitions.ordered_remove. PR middle-end/56461 * tree-vect-stmts.c (vectorizable_conversion): Don't call vec_oprnds0.create (1) for modifier == NONE. PR middle-end/56461 * tree-vect-stmts.c (vectorizable_shift): Don't call create methods on vec_oprnds0 or vec_oprnds1 before loop, only call it on vec_oprnds1 right before pushing anything to it for scalar_shift_arg. PR middle-end/56461 * tree-vect-loop.c (destroy_loop_vec_info): For !clean_stmts, just set nbbs to 0 instead of having separate code path. (vect_analyze_loop_form): Call destroy_loop_vec_info with true instead of false as last argument if returning NULL. 2013-03-03 Sandra Loosemore * target.def (TARGET_OPTION_VALID_ATTRIBUTE_P): Update comments; the attribute is now called "target" instead of "option". (TARGET_OPTION_PRAGMA_PARSE): Likewise, for the pragma. * doc/tm.texi.in (Target Attributes): Likewise document the correct attribute/pragma name for TARGET_OPTION_VALID_P and TARGET_OPTION_PRAGMA_PARSE. Also copy-edit and correct markup. * doc/tm.texi: Regenerated. 2013-03-02 David Holsgrove * config/microblaze/microblaze.c: Check mcpu, pcmp requirement and set TARGET_REORDER to 0 if not met. * config/microblaze/microblaze.h: Add -mxl-reorder to DRIVER_SELF_SPECS. * config/microblaze/microblaze.md: New bswapsi2 and bswaphi2. instructions emitted if TARGET_REORDER. * config/microblaze/microblaze.opt: New option -mxl-reorder set to 1 or 0 for -m/-mno case, but initialises as 2 to detect default use case separately. 2013-03-01 Xinliang David Li * tree-ssa-uninit.c (compute_control_dep_chain): Limit post-dom walk length. 2013-03-01 Jakub Jelinek PR middle-end/56461 * tree-ssa-loop-ivcanon.c (tree_estimate_loop_size): Release path vector even when returning true. Fix up function comment formatting. PR middle-end/56461 * ira-build.c (ira_loop_nodes_count): New variable. (create_loop_tree_nodes): Initialize it. (finish_loop_tree_nodes): Use it instead of looking at current_loops. PR middle-end/56461 * tree-vect-data-refs.c (vect_permute_store_chain): Avoid using copy method on dr_chain and result_chain. * tree-vect-stmts.c (vectorizable_store): Only call result_chain.create if j == 0. PR middle-end/56461 * tree-vect-stmts.c (vect_create_vectorized_promotion_stmts): Call vec_oprnds0->release (); rather than vec_oprnds0->truncate (0) before overwriting it. 2013-03-01 Tobias Burnus * doc/extended.texi (C Extensions): Change order in @menu to match @node. (Other MIPS Built-in Functions): Move last MIPS entry before "picoChip Built-in Functions". (SH Built-in Functions): Move after RX Built-in Functions. * doc/gcc.texi (Introduction): Change order in @menu to match @node. * doc/md.texi (Constraints): Ditto. * gty.texi (Type Information): Ditto. (User-provided marking routines for template types): Make subsection. * doc/invoke.texi (AArch64 Options): Move before "Adapteva Epiphany Options". 2013-02-28 Konstantin Serebryany Jakub Jelinek PR sanitizer/56454 * asan.c (gate_asan): Lookup no_sanitize_address instead of no_address_safety_analysis attribute. * doc/extend.texi (no_address_safety_attribute): Rename to no_sanitize_address attribute, mention no_address_safety_analysis attribute as deprecated alias. 2013-02-28 Jakub Jelinek PR middle-end/56461 * tree-vectorizer.h (vect_get_slp_defs): Change 3rd argument type to vec > *. * tree-vect-slp.c (vect_get_slp_defs): Likewise. Change vec_defs to be vec instead of vec *, set vec_defs to vNULL and call vec_defs.create (number_of_vects), adjust other uses of vec_defs. * tree-vect-stmts.c (vect_get_vec_defs, vectorizable_call, vectorizable_condition): Adjust vect_get_slp_defs callers. 2013-02-28 James Greenhalgh * config/aarch64/aarch64.c (aarch64_float_const_representable): Remove unused variable. 2013-02-28 James Greenhalgh * config/aarch64/aarch64.c (aarch64_mangle_type): Make static. 2013-02-28 James Greenhalgh * config/aarch64/aarch64-builtins.c (aarch64_init_simd_builtins): Make static. 2013-02-28 James Greenhalgh * config/aarch64/aarch64.c (aarch64_simd_make_constant): Make static. 2013-02-28 Martin Jambor * tree-sra.c (load_assign_lhs_subreplacements): Do not put replacements with no initialization to the RHS of debug statements. 2013-02-28 Martin Jambor PR tree-optimization/56294 * tree-sra.c (analyze_access_subtree): Create replacement declarations. Adjust dumping. (get_access_replacement): Do not call create_access_replacement. Assert a replacement exists. (get_repl_default_def_ssa_name): Create the replacement declaration itself. 2013-02-28 Ramana Radhakrishnan * config/arm/arm.c (arm_output_mi_thunk): Call final_start_function and final_end_function. 2013-02-28 Marek Polacek PR rtl-optimization/56466 * loop-unroll.c (unroll_and_peel_loops): Call fix_loop_structure if we're changing a loop. (peel_loops_completely): Likewise. 2013-02-28 Paolo Carlini PR c++/55813 * doc/invoke.texi ([-Wctor-dtor-privacy]): Complete. 2013-02-28 Georg-Johann Lay PR target/56445 * config/avr/avr.c (avr_init_builtins): Use 'n' instead of empty macro parameters with: FX_FTYPE_FX, FX_FTYPE_FX_INT, INT_FTYPE_FX, INTX_FTYPE_FX, FX_FTYPE_INTX. * config/avr/builtins.def: Adjust respective DEF_BUILTIN. 2013-02-28 Georg-Johann Lay * avr/avr-mcus.def (ata5272, ata5505, attiny1634, ata6285) (ata6286, atmega8a, atmega48pa, ata5790, ata5790n, ata5795) (atmega164pa, atmega165pa, atmega168pa, atmega16hva, atmega16hvb) (atmega16hvbrevb, atmega16m1, atmega16u4, atmega26hvg, atmega32a) (atmega32a, atmega3250pa, atmega3290pa, atmega32c1, atmega32m1) (atmega32u4, atmega32u6, atmega64a, atmega6490a, atmega6490p) (atmega64c1, atmega64m1, atmega64rfa2, atmega64rfr2, atmega32hvb) (atmega32hvbrevb, atmega16hva2, atmega48hvf, at90pwm161) (atmega128a, atmega1284, atmxt112sl, atmxt224, atmxt224e) (atmxt336s, atxmega16a4u, atxmega16c4, atxmega32a4u, atxmega32c4) (atxmega32e5, atxmega64a3u, atxmega64a4u, atxmega64b1, atxmega64b3) (atxmega64c3, atxmega64d4, atxmega128a3u, atxmega128b1) (atxmega128b3, atxmega128c3, atxmega128d4, atmxt540s, atmxt540sreva) (atxmega192a3u, atxmega192c3, atxmega256a3u, atxmega256c3) (atxmega384c3, atxmega384d3, atxmega128a4u): New AVR_MCU. (avrxmega6): Increase max flash segments from 5 to 6. * config/avr/t-multilib: Regenerate. * config/avr/avr-tables.opt: Regenerate. * doc/avr-mmcu.texi: Regenerate. 2013-02-28 Georg-Johann Lay * config/avr/avr.h (device_to_arch): Rename to device_to_ld. (avr_device_to_arch): Rename to avr_device_to_ld. (avr_device_to_as): New prototype. (EXTRA_SPEC_FUNCTIONS): Add device_to_as. (ASM_SPEC): Use device_to_as to get -mmcu= and -mno-skip-bug=. * config/avr/driver-avr.c (avr_device_to_as): New. (avr_device_to_arch): Rename to avr_device_to_ld. 2013-02-27 Jakub Jelinek PR middle-end/56461 * tree-vect-data-refs.c (vect_permute_load_chain): Avoid using copy method on dr_chain and result_chain. PR middle-end/56461 * tree-ssa-loop-niter.c (maybe_lower_iteration_bound): Call pointer_set_destroy on not_executed_last_iteration. PR middle-end/56461 * tree-vect-loop.c (vectorizable_reduction): Release vect_defs vector. PR middle-end/56461 * ipa-pure-const.c (propagate): Use FOR_EACH_FUNCTION instead of FOR_EACH_DEFINED_FUNCTION when freeing state. PR middle-end/56461 * df-scan.c (df_insn_delete): Use df_scan_free_mws_vec before pool_free. (df_insn_rescan_debug_internal): Use df_scan_free_mws_vec before overwriting it. PR middle-end/56461 * ipa-cp.c (decide_whether_version_node): Call vec_free on known_aggs[i].items and release known_aggs vector. PR middle-end/56461 * ipa-reference.c (propagate): Free node_info even for alias nodes. 2013-02-27 Edgar E. Iglesias * config/microblaze/microblaze.c (microblaze_emit_compare): Use xor for EQ/NE comparisions. * config/microblaze/microblaze.md (cstoresf4): Add constraints (cbranchsf4): Adjust operator to comparison_operator. 2013-02-27 Jakub Jelinek PR middle-end/56461 * tree-flow.h (edge_var_map_vector): Change into va_heap, vl_embed vector. * tree-ssa.c (redirect_edge_var_map_add): Use vec_safe_reserve and vec_safe_push, always update *slot. (redirect_edge_var_map_clear): Use vec_free. (redirect_edge_var_map_dup): Use vec_safe_copy and vec_safe_reserve. (free_var_map_entry): Use vec_free. * tree-cfgcleanup.c (remove_forwarder_block_with_phi): Use FOR_EACH_VEC_SAFE_ELT instead of FOR_EACH_VEC_ELT. 2013-02-27 Andrey Belevantsev PR middle-end/45472 * sel-sched-ir.c (merge_expr): Also change vinsn of merged expr when the may_trap_p bit of the exprs being merged differs. Reorder tests for speculativeness in the logical and operator. 2013-02-27 Jakub Jelinek * incpath.c (add_standard_paths): Use reconcat instead of concat where appropriate and avoid leaking memory. * opts.h: Include obstack.h. (opts_concat): New prototype. (opts_obstack): New declaration. * opts.c (opts_concat): New function. (opts_obstack): New variable. (init_options_struct): Call gcc_init_obstack on opts_obstack. (finish_options): Use opts_concat instead of concat and XOBNEWVEC instead of XNEWVEC. * opts-common.c (generate_canonical_option, decode_cmdline_option, generate_option): Likewise. * Makefile.in (OPTS_H): Depend on $(OBSTACK_H). * lto-wrapper.c (main): Call gcc_init_obstack on opts_obstack. PR target/56455 * stmt.c (expand_switch_as_decision_tree_p): If flag_pic and ASM_OUTPUT_ADDR_DIFF_ELT isn't defined, return true. 2013-02-26 Jakub Jelinek PR middle-end/56461 * lra-spills.c (lra_spill): Free spill_hard_reg at the end. 2013-02-26 Joern Rennecke * config/arm/arm.c (const_ok_for_dimode_op): Back out last change. (arm_block_move_unaligned_straight): Likewise. (arm_adjust_block_mem): Likewise. 2013-02-26 Joern Rennecke PR target/48901 * config/lm32/lm32.c (gen_int_relational): Remove unused variables temp, cond and label. * config/lm32/lm32.md (ashlsi3): Remove unused variable one. PR target/52500 * config/c6x/c6x.c (dbx_register_map): Change to unsigned. * config/c6x/c6x.h (dbx_register_map): Update declaration. PR target/52501 * config/cr16/cr16-protos.h: Move end of RTX_CODE guard below end of prologue/epilogue functions. PR target/52550 * config/tilegx/tilegx.c (tilegx_expand_prologue): Remove unused variable cfa_offset. * config/tilepro/tilepro.c (tilepro_expand_prologue): Likewise. PR target/54639 * config/mn10300/mn10300.c (mn10300_expand_epilogue): Avoid offset type promotion to unsigned. PR target/54640 * config/arm/arm.c (const_ok_for_dimode_op): Make code consistent for HOST_WIDE_INT of 32 bit / same size as int. (arm_block_move_unaligned_straight): Likewise. (arm_adjust_block_mem): Likewise. PR target/54662 * config/mep/t-mep (mep-pragma.o): Use ALL_COMPILERFLAGS instead of ALL_CFLAGS. 2013-02-26 Marek Polacek PR tree-optimization/56426 * tree-ssa-loop.c (tree_ssa_loop_init): Always call scev_initialize. 2013-02-26 Richard Biener PR target/56444 * config/mn10300/mn10300.c (mn10300_scan_for_setlb_lcc): Remove unused variable loops. 2013-02-26 Jakub Jelinek PR tree-optimization/56448 * fold-const.c (operand_equal_p) : Don't look at TREE_SIDE_EFFECTS if flags contain OEP_CONSTANT_ADDRESS_OF. Clear OEP_CONSTANT_ADDRESS_OF from flags before recursing on second or later operands of the references, or even first operand for INDIRECT_REF, TARGET_MEM_REF or MEM_REF. PR tree-optimization/56443 * tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): For overaligned types, pass TYPE_UNSIGNED (scalar_type) as second argument to type_for_mode langhook. 2013-02-25 Matt Turner * doc/invoke.texi: Document r4700. 2013-02-25 Richard Biener PR tree-optimization/56175 * tree-ssa-forwprop.c (hoist_conversion_for_bitop_p): New predicate, split out from ... (simplify_bitwise_binary): ... here. Also guard the conversion of (type) X op CST to (type) (X op ((type-x) CST)) with it. 2013-02-25 Catherine Moore Revert: 2013-02-24 Catherine Moore Maciej W. Rozycki Tom de Vries Nathan Sidwell Iain Sandoe Nathan Froyd Chao-ying Fu * doc/extend.texi (micromips, nomicromips, nocompression): Document new function attributes. * doc/invoke.texi (minterlink-compressed, mmicromips, m14k, m14ke, m14kec): Document new options. (minterlink-mips16): Update documentation. * doc/md.texi (ZC, ZD): Document new constraints. * configure.ac (gcc_cv_as_micromips): Check if linker supports the .set micromips directive. * configure: Regenerate. * config.in: Regenerate. * config/mips/mips-tables.opt: Regenerate. * config/mips/micromips.md: New file. * constraints.md (ZC, AD): New constraints. * config/mips/predicates.md (movep_src_register): New predicate. (movep_src_operand): New predicate. (non_volatile_mem_operand): New predicate. * config/mips/mips.md (multimem): New type. (length): Differentiate between 17-bit and 18-bit branch offsets. (MOVEP1, MOVEP2): New mode iterator. (mov_l): Use ZC constraint. (mov_r): Likewise. (mov_l): Likewise. (mov_r): Likewise. (*branch_equality_inverted): Add microMIPS support. (*branch_equality): Likewise. (*jump_absolute): Likewise. (indirect_jump_): Likewise. (tablejump_): Likewise. (_internal): Likewise. (sibcall_internal): Likewise. (sibcall_value_internal): Likewise. (prefetch): Use constraint ZD. * config/mips/mips.opt (minterlink-compressed): New option. (minterlink-mips16): Now an alias for minterlink-compressed. (mmicromips): New option. * config/mips/sync.md (sync_compare_and_swap): Use ZR constraint. (compare_and_swap_12): Likewise. (sync_add): Likewise. (sync__12): Likewise. (sync_old__12): Likewise. (sync_new__12): Likewise. (sync_nand_12): Likewise. (sync_old_nand_12): Likewise. (sync_new_nand_12): Likewise. (sync_sub): Likewise. (sync_old_add): Likewise. (sync_old_sub): Likewise. (sync_new_add): Likewise. (sync_new_sub): Likewise. (sync_): Likewise. (sync_old_): Likewise. (sync_new_): Likewise. (sync_nand): Likewise. (sync_old_nand): Likewise. (sync_new_nand): Likewise. (sync_lock_test_and_set): Likewise. (test_and_set_12): Likewise. (atomic_compare_and_swap): Likewise. (atomic_exchange_llsc): Likewise. (atomic_fetch_add_llsc): Likewise. * config/mips/mips-cpus.def (m14kc, m14k): New processors. * config/mips/mips-protos.h (umips_output_save_restore): New prototype. (umips_save_restore_pattern_p): Likewise. (umips_load_store_pair_p): Likewise. (umips_output_load_store_pair): Likewise. (umips_movep_target_p): Likewise. (umips_12bit_offset_address_p): Likewise. * config/mips/mips.c (MIPS_MAX_FIRST_STEP): Update for microMIPS. (mips_base_mips16): Rename this... (mips_base_compression_flags): ...to this. Update all uses. (mips_attribute_table): Add micromips, nomicromips and nocompression. (mips_mips16_decl_p): Delete. (mips_nomips16_decl_p): Delete. (mips_get_compress_on_flags): New function. (mips_get_compress_off_flags): New function. (mips_get_compress_mode): New function. (mips_get_compress_on_name): New function. (mips_get_compress_off_name): New function. (mips_insert_attributes): Support multiple compression types. (mips_merge_decl_attributes): Likewise. (umips_12bit_offset_address_p): New function. (mips_start_function_definition): Emit .set micromips directive. (mips_call_may_need_jalx_p): New function. (mips_function_ok_for_sibcall): Add microMIPS support. (mips_print_operand_punctuation): Support short delay slots and compact jumps. (umips_swm_mask, umips_swm_encoding): New. (umips_build_save_restore): New function. (mips_for_each_saved_gpr_and_fpr): Add microMIPS support. (was_mips16_p): Remove. (old_compression_mode): New. (mips_set_compression_mode): New function. (mips_set_current_function): Add microMIPS support. (mips_option_override): Likewise. (umips_save_restore_pattern_p): New function. (umips_output_save_restore): New function. (umips_load_store_pair_p_1): New function. (umips_load_store_pair_p): New function. (umips_output_load_store_pair_1): New function. (umips_output_load_store_pair): New function. (umips_movep_target_p) New function. (mips_prepare_pch_save): Add microMIPS support. * config/mips/mips.h (TARGET_COMPRESSION): New. (TARGET_CPU_CPP_BUILTINS): Update macro to use new compression flags and to support microMIPS. (MIPS_ISA_LEVEL_SPEC): Add m14k processors. (MIPS_ARCH_FLOAT_SPEC): Likewise. (ISA_HAS_LWXS): Include TARGET_MICROMIPS. (ISA_HAS_LOAD_DELAY): Exclude TARGET_MICROMIPS. (ASM_SPEC): Support mmicromips and mno-micromips. (M16STORE_REG_P): New macro. (MIPS_CALL): Support TARGET_MICROMIPS. (MICROMIPS_J): New macro. (mips_base_mips16): Rename this... (mips_base_compression_flags): ...to this. (UMIPS_12BIT_OFFSET_P): New macro. * config/mips/t-sde: (MULTILIB_OPTIONS): Add microMIPS. (MULTILIB_DIRNAMES): Likewise. 2013-02-25 Tom de Vries PR rtl-optimization/56131 * insn-notes.def (INSN_NOTE_BASIC_BLOCK): Update comment. * cfgrtl.c (delete_insn): Don't reorder NOTE_INSN_DELETED_LABEL and NOTE_INSN_BASIC_BLOCK if BLOCK_FOR_INSN == NULL. 2013-02-25 Tobias Burnus * doc/invoke.texi (-fsanitize=): Move from optimization to debugging options. 2013-02-25 Andrey Belevantsev * sched-deps.c (sched_analyze_insn): Fix typo in comment. 2013-02-25 Andrey Belevantsev Alexander Monakov PR middle-end/56077 * sched-deps.c (sched_analyze_insn): When reg_pending_barrier, flush pending lists also on non-jumps. Adjust comment. 2013-02-24 Catherine Moore Maciej W. Rozycki Tom de Vries Nathan Sidwell Iain Sandoe Nathan Froyd Chao-ying Fu * doc/extend.texi (micromips, nomicromips, nocompression): Document new function attributes. * doc/invoke.texi (minterlink-compressed, mmicromips, m14k, m14ke, m14kec): Document new options. (minterlink-mips16): Update documentation. * doc/md.texi (ZC, ZD): Document new constraints. * configure.ac (gcc_cv_as_micromips): Check if linker supports the .set micromips directive. * configure: Regenerate. * config.in: Regenerate. * config/mips/mips-tables.opt: Regenerate. * config/mips/micromips.md: New file. * constraints.md (ZC, AD): New constraints. * config/mips/predicates.md (movep_src_register): New predicate. (movep_src_operand): New predicate. (non_volatile_mem_operand): New predicate. * config/mips/mips.md (multimem): New type. (length): Differentiate between 17-bit and 18-bit branch offsets. (MOVEP1, MOVEP2): New mode iterator. (mov_l): Use ZC constraint. (mov_r): Likewise. (mov_l): Likewise. (mov_r): Likewise. (*branch_equality_inverted): Add microMIPS support. (*branch_equality): Likewise. (*jump_absolute): Likewise. (indirect_jump_): Likewise. (tablejump_): Likewise. (_internal): Likewise. (sibcall_internal): Likewise. (sibcall_value_internal): Likewise. (prefetch): Use constraint ZD. * config/mips/mips.opt (minterlink-compressed): New option. (minterlink-mips16): Now an alias for minterlink-compressed. (mmicromips): New option. * config/mips/sync.md (sync_compare_and_swap): Use ZR constraint. (compare_and_swap_12): Likewise. (sync_add): Likewise. (sync__12): Likewise. (sync_old__12): Likewise. (sync_new__12): Likewise. (sync_nand_12): Likewise. (sync_old_nand_12): Likewise. (sync_new_nand_12): Likewise. (sync_sub): Likewise. (sync_old_add): Likewise. (sync_old_sub): Likewise. (sync_new_add): Likewise. (sync_new_sub): Likewise. (sync_): Likewise. (sync_old_): Likewise. (sync_new_): Likewise. (sync_nand): Likewise. (sync_old_nand): Likewise. (sync_new_nand): Likewise. (sync_lock_test_and_set): Likewise. (test_and_set_12): Likewise. (atomic_compare_and_swap): Likewise. (atomic_exchange_llsc): Likewise. (atomic_fetch_add_llsc): Likewise. * config/mips/mips-cpus.def (m14kc, m14k): New processors. * config/mips/mips-protos.h (umips_output_save_restore): New prototype. (umips_save_restore_pattern_p): Likewise. (umips_load_store_pair_p): Likewise. (umips_output_load_store_pair): Likewise. (umips_movep_target_p): Likewise. (umips_12bit_offset_address_p): Likewise. * config/mips/mips.c (MIPS_MAX_FIRST_STEP): Update for microMIPS. (mips_base_mips16): Rename this... (mips_base_compression_flags): ...to this. Update all uses. (mips_attribute_table): Add micromips, nomicromips and nocompression. (mips_mips16_decl_p): Delete. (mips_nomips16_decl_p): Delete. (mips_get_compress_on_flags): New function. (mips_get_compress_off_flags): New function. (mips_get_compress_mode): New function. (mips_get_compress_on_name): New function. (mips_get_compress_off_name): New function. (mips_insert_attributes): Support multiple compression types. (mips_merge_decl_attributes): Likewise. (umips_12bit_offset_address_p): New function. (mips_start_function_definition): Emit .set micromips directive. (mips_call_may_need_jalx_p): New function. (mips_function_ok_for_sibcall): Add microMIPS support. (mips_print_operand_punctuation): Support short delay slots and compact jumps. (umips_swm_mask, umips_swm_encoding): New. (umips_build_save_restore): New function. (mips_for_each_saved_gpr_and_fpr): Add microMIPS support. (was_mips16_p): Remove. (old_compression_mode): New. (mips_set_compression_mode): New function. (mips_set_current_function): Add microMIPS support. (mips_option_override): Likewise. (umips_save_restore_pattern_p): New function. (umips_output_save_restore): New function. (umips_load_store_pair_p_1): New function. (umips_load_store_pair_p): New function. (umips_output_load_store_pair_1): New function. (umips_output_load_store_pair): New function. (umips_movep_target_p) New function. (mips_prepare_pch_save): Add microMIPS support. * config/mips/mips.h (TARGET_COMPRESSION): New. (TARGET_CPU_CPP_BUILTINS): Update macro to use new compression flags and to support microMIPS. (MIPS_ISA_LEVEL_SPEC): Add m14k processors. (MIPS_ARCH_FLOAT_SPEC): Likewise. (ISA_HAS_LWXS): Include TARGET_MICROMIPS. (ISA_HAS_LOAD_DELAY): Exclude TARGET_MICROMIPS. (ASM_SPEC): Support mmicromips and mno-micromips. (M16STORE_REG_P): New macro. (MIPS_CALL): Support TARGET_MICROMIPS. (MICROMIPS_J): New macro. (mips_base_mips16): Rename this... (mips_base_compression_flags): ...to this. (UMIPS_12BIT_OFFSET_P): New macro. * config/mips/t-sde: (MULTILIB_OPTIONS): Add microMIPS. (MULTILIB_DIRNAMES): Likewise. 2013-02-24 Jakub Jelinek PR target/52555 * target-globals.c (save_target_globals): For init_reg_sets and target_reinit remporarily set this_fn_optabs to this_target_optabs. 2013-02-22 James Grennahlgh * config/aarch64/aarch64-simd-builtins.def: Add copyright header. * config/aarch64/t-aarch64 (aarch64-builtins.o): Depend on aarch64-simd-builtins.def. 2013-02-22 Vladimir Makarov PR inline-asm/56148 * lra-constraints.c (process_alt_operands): Reload operand conflicting with earlier clobber only if no more other conflicting operands. 2013-02-22 Jakub Jelinek PR sanitizer/56393 * config/gnu-user.h (LIBASAN_EARLY_SPEC): Link in libasan_preinit.o if not linking a shared library. 2013-02-22 Seth LaForge * config.gcc (arm*-*-eabi*): Treat arm*eb as big-endian. 2013-02-22 Greta Yorsh * config/arm/arm.md (split for extendsidi): Update condition. (zero_extenddi2,extenddi2): Add an alternative. * config/arm/iterators.md (qhs_extenddi_cstr): Likewise. (qhs_zextenddi_cstr): Likewise. 2013-02-21 Jakub Jelinek PR middle-end/56420 * expmed.c (EXACT_POWER_OF_2_OR_ZERO_P): Do subtraction in uhwi, to avoid signed wrapping. (expand_mult): Handle properly multiplication by ((dword_type) -1) << (BITS_PER_WORD - 1). Improve multiplication by ((dword_type) 1) << (BITS_PER_WORD - 1). Avoid undefined behavior in the compiler if coeff is HOST_WIDE_INT_MIN. (expand_divmod): Don't make ext_op1 static, change it's type to uhwi. Avoid undefined behavior in -INTVAL (op1). PR rtl-optimization/50339 * lower-subreg.h (struct lower_subreg_choices): Add splitting_ashiftrt field. * lower-subreg.c (compute_splitting_shift): Handle ASHIFTRT. (compute_costs): Call compute_splitting_shift also for ASHIFTRT into splitting_ashiftrt field. (find_decomposable_shift_zext, resolve_shift_zext): Handle also ASHIFTRT. (dump_choices): Fix up printing LSHIFTRT choices, print ASHIFTRT choices. 2013-02-20 Aldy Hernandez PR middle-end/56108 * trans-mem.c (execute_tm_mark): Do not expand transactions that are sure to go irrevocable. 2013-02-21 Hans-Peter Nilsson * doc/rtl.texi (vec_concat, vec_duplicate): Mention that scalars are valid operands. 2013-02-21 Martin Jambor PR tree-optimization/56310 * ipa-cp.c (agg_replacements_to_vector): New parameter index, copy only matching indices and non-negative final offsets. (intersect_aggregates_with_edge): Pass src_idx to agg_replacements_to_vector. Pass src_idx insstead of index to intersect_with_agg_replacements. 2013-02-21 Martin Jambor * ipa-cp.c (good_cloning_opportunity_p): Dump the real threshold instead of hard-wired defaults. 2013-02-21 Maciej W. Rozycki * doc/invoke.texi (MIPS Options): Update documentation of the floating-point multiply-accumulate instruction restrictions. 2013-02-21 Kostya Serebryany * config/i386/i386.c (ix86_asan_shadow_offset): Use 0x7fff8000 as asan_shadow_offset on x86_64 linux. 2013-02-21 Richard Biener PR tree-optimization/56415 Revert 2013-02-11 Richard Biener PR tree-optimization/56273 * tree-vrp.c (simplify_cond_using_ranges): Disable for the first VRP run. 2013-02-21 Jakub Jelinek PR bootstrap/56258 * doc/invoke.texi (-fdump-rtl-pro_and_epilogue): Use @item instead of @itemx. PR inline-asm/56405 * expr.c (expand_expr_real_1) : Don't use movmisalign or extract_bit_field for EXPAND_MEMORY modifier. 2013-02-20 Jan Hubicka PR tree-optimization/56265 * ipa-prop.c (ipa_make_edge_direct_to_target): Fixup callgraph when target is referenced for first time. 2013-02-20 Richard Biener * tree-call-cdce.c (tree_call_cdce): Do not remove unused locals. * tree-ssa-forwprop.c (ssa_forward_propagate_and_combine): Likewise. * tree-ssa-dce.c (perform_tree_ssa_dce): Likewise. * tree-ssa-copyrename.c (copy_rename_partition_coalesce): Do not return anything. (rename_ssa_copies): Do not remove unused locals. * tree-ssa-ccp.c (do_ssa_ccp): Likewise. * tree-ssanames.c (pass_release_ssa_names): Remove unused locals first. * passes.c (execute_function_todo): Do not schedule unused locals removal if cleanup_tree_cfg did something. * tree-ssa-live.c (remove_unused_locals): Dump statistics about the number of removed locals. 2013-02-20 Richard Biener PR tree-optimization/56398 * tree-vect-loop-manip.c (adjust_debug_stmts): Skip SSA default defs. 2013-02-20 Martin Jambor PR tree-optimization/55334 * ipa-cp.c (initialize_node_lattices): Disable IPA-CP through and to restricted pointers to arrays. 2013-02-20 Richard Biener Jakub Jelinek PR tree-optimization/56396 * tree-ssa-ccp.c (n_const_val): New static variable. (get_value): Return NULL for SSA names we don't have a lattice entry for. (ccp_initialize): Initialize n_const_val. * tree-ssa-copy.c (n_copy_of): New static variable. (init_copy_prop): Initialize n_copy_of. (get_value): Return NULL_TREE for SSA names we don't have a lattice entry for. 2013-02-20 Martin Jambor * ipa-cp.c (initialize_node_lattices): Fix dumping condition. 2013-02-20 Richard Biener * genpreds.c (write_lookup_constraint): Do not compare first letter of the constraint again. 2013-02-20 Richard Biener * tree-ssa-loop-ivopts.c (alloc_use_cost_map): Use bitmap_count_bits and ceil_log2. (get_use_iv_cost): Terminate hashtable walk when coming across an empty entry. 2013-02-20 Igor Zamyatin * config/i386/i386.c (initial_ix86_tune_features): Turn on fp reassociation for avx2 targets. 2012-02-19 Edgar E. Iglesias * config/microblaze/microblaze.c: microblaze_has_clz = 0 Add version check for v8.10.a to enable microblaze_has_clz * config/microblaze/microblaze.h: Add TARGET_HAS_CLZ as combined version and TARGET_PATTERN_COMPARE check * config/microblaze/microblaze.md: New clzsi2 instruction 2012-02-19 Edgar E. Iglesias * config/microblaze/microblaze.md (call_value_intern): Check symbol is function before branching. 2012-02-19 Andrey Belevantsev * sel-sched-dump.c (dump_insn_rtx_flags): Explicitly set DUMP_INSN_RTX_UID. (dump_insn_rtx_1): Pass PATTERN (insn) to str_pattern_slim. 2012-02-19 Andrey Belevantsev PR middle-end/55889 * sel-sched.c: Include ira.h. (implicit_clobber_conflict_p): New function. (moveup_expr): Use it. * Makefile.in (sel-sched.o): Depend on ira.h. 2013-02-19 Richard Biener PR tree-optimization/56384 * tree-ssa-sccvn.h (struct vn_phi_s): Add type member. (vn_hash_type): Split out from ... (vn_hash_constant_with_type): ... here. * tree-ssa-sccvn.c (vn_phi_compute_hash): Use vn_hash_type. (vn_phi_eq): Compare types from vn_phi_s structure. (vn_phi_lookup): Populate vn_phi_s type. (vn_phi_insert): Likewise. 2013-02-19 Jakub Jelinek PR tree-optimization/56350 * tree-vect-loop.c (vectorizable_reduction): If orig_stmt, return false if haven't found reduction or nested cycle operand, rather than asserting we must find it. PR tree-optimization/56381 * tree-ssa-pre.c (create_expression_by_pieces): Fix up last argument to fold_build3. 2013-02-18 Aldy Hernandez Jakub Jelinek PR target/52555 * genopinit.c (raw_optab_handler): Use this_fn_optabs. (swap_optab_enable): Same. (init_all_optabs): Use argument instead of global. * tree.h (struct tree_optimization_option): New field target_optabs. * expr.h (init_all_optabs): Add argument to prototype. (TREE_OPTIMIZATION_OPTABS): New. (save_optabs_if_changed): Protoize. * optabs.h: Declare this_fn_optabs. * optabs.c (save_optabs_if_changed): New. Declare this_fn_optabs. (init_optabs): Add argument to init_all_optabs() call. * function.c (invoke_set_current_function_hook): Handle per function optabs. * function.h (struct function): New field optabs. * config/mips/mips.c (mips_set_mips16_mode): Handle when optimization_current_node has changed. * target-globals.h (save_target_globals_default_opts): Protoize. * target-globals.c (save_target_globals_default_opts): New. 2013-02-18 John David Anglin PR target/56347 * config/pa/pa.c (pa_conditional_register_usage): On HP-UX, mark registers %fr12 and %fr12R as call used. PR target/56214 * config/pa/predicates.md (base14_operand): Except for BLKmode, QImode and HImode, require all displacements to be an integer multiple of their mode size. * config/pa/pa.c (pa_legitimate_address_p): For REG+BASE addresses, only allow QImode and HImode when reload is in progress and strict is true. Likewise for symbolic addresses. Use base14_operand to check displacements in REG+BASE addresses. 2013-02-18 Richard Biener PR tree-optimization/56366 * tree-vect-loop.c (get_initial_def_for_induction): Properly handle sign-conversion of outer-loop initial induction value. 2013-02-18 Richard Biener PR middle-end/56349 * cfghooks.c (merge_blocks): If we merge a latch into another block adjust references to it. * cfgloop.c (flow_loops_find): Reset latch before recomputing it. (verify_loop_structure): Verify that a recorded latch is in fact a latch. 2013-02-18 Richard Biener PR tree-optimization/56321 * tree-ssa-reassoc.c (propagate_op_to_single_use): Properly order SSA name release and virtual operand unlinking. 2013-02-17 Edgar E. Iglesias * config/microblaze/microblaze.md (save_stack_block): Define. (restore_stack_block): Likewise. 2013-02-16 Edgar E. Iglesias * config/microblaze/linux.h (TARGET_SUPPORTS_PIC): Define as 1. * config/microblaze/microblaze.h (TARGET_SUPPORTS_PIC): Define as 1. * config/microblaze/microblaze.c (microblaze_option_override): Bail out early for PIC modes when target does not support PIC. 2013-02-16 Edgar E. Iglesias * config/microblaze/microblaze.c (microblaze_asm_trampoline_template): Replace with a microblaze version. (microblaze_trampoline_init): Adapt for microblaze. * config/microblaze/microblaze.h (TRAMPOLINE_SIZE): Adapt for microblaze. 2013-02-16 Jakub Jelinek Dodji Seketeli PR asan/56330 * asan.c (get_mem_refs_of_builtin_call): White space and style cleanup. (instrument_mem_region_access): Do not forget to always put instrumentation of the of 'base' and 'base + len' in a "if (len != 0) statement, even for cases where either 'base' or 'base + len' are not instrumented -- because they have been previously instrumented. Simplify the logic by putting all the statements instrument 'base + len' inside a sequence, and then insert that sequence right before the current insertion point. Then, to instrument 'base + len', just get an iterator on that statement. And do not forget to update the pointer to iterator the function received as argument. 2013-02-15 Vladimir Makarov PR rtl-optimization/56348 * lra-assigns.c (reload_pseudo_compare_func): Prefer bigger pseudos. 2013-02-15 Steven Bosscher * graph.c (start_graph_dump): Print dumpfile base as digraph label. (clean_graph_dump_file): Pass base to start_graph_dump. 2013-02-14 Richard Henderson PR target/55941 * lower-subreg.c (simple_move): Check dest mode instead of src mode. 2013-02-14 Steven Bosscher * collect2-aix.h: Define F_LOADONLY. 2013-02-14 Richard Biener PR lto/50494 * varasm.c (output_constant_def_1): Get the decl representing the constant as argument. (output_constant_def): Wrap output_constant_def_1. (make_decl_rtl): Use output_constant_def_1 with the decl representing the constant. (build_constant_desc): Optionally re-use a decl already representing the constant. (tree_output_constant_def): Adjust. 2013-02-14 Dodji Seketeli Fix an asan crash * asan.c (instrument_builtin_call): Really put the length of the second source argument into src1_len. 2013-02-13 Jakub Jelinek * asan.c (create_cond_insert_point): Add create_then_fallthru_edge argument. If it is false, don't create edge from then_bb to fallthru_bb. (insert_if_then_before_iter): Pass true to it. (build_check_stmt): Pass false to it. (transform_statements): Flush hash table only on extended basic block boundaries, rather than at the beginning of every bb. Don't flush hash table on nonfreeing_call_p calls. * tree-flow.h (nonfreeing_call_p): New prototype. * tree-ssa-phiopt.c (nonfreeing_call_p): No longer static. 2013-02-13 David S. Miller * expmed.c (expand_shift_1): Only strip scalar integer subregs. 2013-02-13 Vladimir Makarov PR target/56184 * ira.c (max_regno_before_ira): Move from ... (ira): ... here. (fix_reg_equiv_init): Use max_regno_before_ira instead of vec_safe_length. 2013-02-13 Jakub Jelinek * config/i386/i386.c (ix86_asan_shadow_offset): Revert last change. 2013-02-13 Richard Biener PR lto/56295 * gimple-streamer-out.c (output_gimple_stmt): Undo wrapping globals in MEM_REFs. 2013-02-13 Richard Biener * loop-init.c (loop_optimizer_init): Clear loop state when re-initializing preserved loops. * loop-unswitch.c (unswitch_single_loop): Return whether we unswitched the loop. Do not verify loop state here. (unswitch_loops): When we unswitched a loop discover new loops. 2013-02-13 Kostya Serebryany * config/i386/i386.c: Use 0x7fff8000 as asan_shadow_offset on x86_64 linux. * sanitizer.def: Rename __asan_init to __asan_init_v1. 2013-02-12 Dodji Seketeli Avoid instrumenting duplicated memory access in the same basic block * Makefile.in (asan.o): Add new dependency on hash-table.h * asan.c (struct asan_mem_ref, struct mem_ref_hasher): New types. (asan_mem_ref_init, asan_mem_ref_get_end, get_mem_ref_hash_table) (has_stmt_been_instrumented_p, empty_mem_ref_hash_table) (free_mem_ref_resources, has_mem_ref_been_instrumented) (has_stmt_been_instrumented_p, update_mem_ref_hash_table) (get_mem_ref_of_assignment): New functions. (get_mem_refs_of_builtin_call): Extract from instrument_builtin_call and tweak a little bit to make it fit with the new signature. (instrument_builtin_call): Use the new get_mem_refs_of_builtin_call. Use gimple_call_builtin_p instead of is_gimple_builtin_call. (instrument_derefs, instrument_mem_region_access): Insert the instrumented memory reference into the hash table. (maybe_instrument_assignment): Renamed instrument_assignment into this, and change it to advance the iterator when instrumentation actually happened and return true in that case. This makes it homogeneous with maybe_instrument_assignment, and thus give a chance to callers to be more 'regular'. (transform_statements): Clear the memory reference hash table whenever we enter a new BB, when we cross a function call, or when we are done transforming statements. Use maybe_instrument_assignment instead of instrumentation. No more need to special case maybe_instrument_assignment and advance the iterator after calling it; it's now handled just like maybe_instrument_call. Update comment. 2013-02-13 Richard Biener * config/mn10300/mn10300.c (mn10300_scan_for_setlb_lcc): Fix loop discovery code. 2013-02-12 Vladimir Makarov PR inline-asm/56148 * lra-constraints.c (process_alt_operands): Match early clobber operand with itself. Check conflicts with earlyclobber only if the operand is not reloaded. Prefer to reload conflicting operand if earlyclobber and matching operands are the same. 2013-02-12 Richard Biener PR lto/56297 * lto-streamer-out.c (write_symbol): Do not output symbols for hard register variables. 2013-02-12 Georg-Johann Lay PR target/54222 * config/avr/avr-dimode.md (umulsidi3, mulsidi3): New expanders. (umulsidi3_insn, mulsidi3_insn): New insns. 2013-02-12 Christophe Lyon * config/arm/arm-protos.h (struct cpu_vec_costs): New struct type. (struct tune_params): Add vec_costs field. * config/arm/arm.c (arm_builtin_vectorization_cost) (arm_add_stmt_cost): New functions. (TARGET_VECTORIZE_BUILTIN_VECTORIZATION_COST) (TARGET_VECTORIZE_ADD_STMT_COST): Define. (arm_default_vec_cost): New struct of type cpu_vec_costs. (arm_slowmul_tune, arm_fastmul_tune, arm_strongarm_tune) (arm_xscale_tune, arm_9e_tune, arm_v6t2_tune, arm_cortex_tune) (arm_cortex_a15_tune, arm_cortex_a5_tune, arm_cortex_a9_tune) (arm_v6m_tune, arm_fa726te_tune): Define new vec_costs field. 2013-02-12 Richard Biener PR lto/56295 * gimple-streamer-in.c (input_gimple_stmt): Strip MEM_REFs off decls again if possible. 2013-02-12 Richard Biener PR middle-end/56288 * tree-ssa.c (verify_ssa_name): Fix check, move SSA_NAME_IN_FREE_LIST check up. 2013-02-12 Jakub Jelinek Steven Bosscher PR rtl-optimization/56151 * optabs.c (add_equal_note): Don't return 0 if target is a MEM, equal to op0 or op1, and last_insn pattern is CODE operation with MEM dest and one of the operands matches that MEM. 2013-02-11 Sriraman Tallam * doc/extend.texi: Document Function Multiversioning and "default" parameter string to target attribute. * config/i386/i386.c (get_builtin_code_for_version): Return 0 if target attribute parameter is "default". (ix86_compare_version_priority): Remove checks for target attribute. (ix86_mangle_function_version_assembler_name): Change error to sorry. Remove check for target attribute equal to NULL. Add assert. (ix86_generate_version_dispatcher_body): Change error to sorry. 2013-02-11 Iain Sandoe Jack Howarth Patrick Marlier PR libitm/55693 * config/darwin.h: Replace ENDFILE_SPEC with TM_DESTRUCTOR and define ENDFILE_SPEC as TM_DESTRUCTOR. * config/i386/darwin.h (ENDFILE_SPEC): Use TM_DESTRUCTOR. 2013-02-11 Alexander Potapenko Jack Howarth Jakub Jelinek PR sanitizer/55617 * config/darwin.c (cdtor_record): Rename ctor_record. (sort_cdtor_records): Rename sort_ctor_records. (finalize_dtors): New routine to sort destructors by priority before use in assemble_integer. (machopic_asm_out_destructor): Use finalize_dtors if needed. 2013-02-11 Uros Bizjak PR rtl-optimization/56275 * simplify-rtx.c (avoid_constant_pool_reference): Check that offset is non-negative and less than cmode size before calling simplify_subreg. 2013-02-11 Richard Biener PR tree-optimization/56264 * cfgloop.h (fix_loop_structure): Adjust prototype. * loop-init.c (fix_loop_structure): Return the number of newly discovered loops. * tree-cfgcleanup.c (repair_loop_structures): When new loops are discovered, do a full loop-closed SSA rewrite. 2013-02-11 Richard Biener PR tree-optimization/56273 * tree-vrp.c (simplify_cond_using_ranges): Disable for the first VRP run. (check_array_ref): Fix missing newline in dumps. (search_for_addr_array): Likewise. 2013-02-09 David Edelsohn * config/rs6000/aix61.h (OS_MISSING_ALTIVEC): Undefine. 2013-02-09 Jakub Jelinek PR target/56256 * config/rs6000/rs6000.h (ASSEMBLER_DIALECT): Define. 2013-02-08 Vladimir Makarov PR rtl-optimization/56246 * lra-constraints.c (simplify_operand_subreg): Try to reuse reload pseudo. * lra.c (lra): Clear lra_optional_reload_pseudos only when all constraints are satisfied. 2013-02-08 Jeff Law PR debug/53948 * emit-rtl.c (reg_is_parm_p): New function. * regs.h (reg_is_parm_p): New prototype. * ira-conflicts.c (ira_build_conflicts): Allow parameters in callee-clobbered registers. 2013-02-08 Michael Meissner PR target/56043 * config/rs6000/rs6000.c (rs6000_builtin_vectorized_libmass): If there is no implicit builtin declaration, just return NULL. 2013-02-08 Uros Bizjak * config/i386/sse.md (FMAMODEM): New mode iterator. (fma4, fms4, fnma4, fnms4): Use FMAMODEM mode iterator. Do not use TARGET_SSE_MATH in insn constraint. 2013-02-08 Uros Bizjak * config/i386/gnu-user.h (TARGET_CAN_SPLIT_STACK): Define only when HAVE_GAS_CFI_PERSONALITY_DIRECTIVE is set. * config/i386/gnu-user64.h (TARGET_CAN_SPLIT_STACK): Ditto. 2013-02-08 Edgar E. Iglesias * config.gcc (microblaze*-linux*): Add TARGET_BIG_ENDIAN_DEFAULT. (microblaze*-*-elf): Likewise. * config/microblaze/linux.h: Add -mbig-endian / -mlittle-endian to LINK_SPEC. * config/microblaze/microblaze-c.c: Add builtin defines for _LITTLE_ENDIAN and _BIG_ENDIAN. * config/microblaze/microblaze.h: Add TARGET_ENDIAN_DEFAULT and add to TARGET_DEFAULT flags. Expand ASM_SPEC and LINK_SPEC. Update BYTES_BIG_ENDIAN and WORDS_BIG_ENDIAN. * config/microblaze/microblaze.md: Update extendsidi2 and movdi_internal instructions to use low-order / high-order reg print_operands. * config/microblaze/microblaze.opt: Add mbig-endian and mlittle-endian options and inversemask / mask of LITTLE_ENDIAN. * config/microblaze/t-microblaze: Expand multilib options to include mlittle-endian (le) and update exceptions patterns. 2013-02-08 Jakub Jelinek PR rtl-optimization/56195 * lra-constraints.c (get_reload_reg): Don't reuse regs if they have smaller mode than requested, if they have wider mode than requested, try to return a SUBREG. PR tree-optimization/56250 * fold-const.c (extract_muldiv_1) : Don't optimize if type is unsigned and code isn't MULT_EXPR. 2013-02-08 Georg-Johann Lay PR tree-optimization/56064 * fixed-value.c (fixed_from_double_int): Sign/zero extend payload bits according to mode. * fixed-value.h (fixed_from_double_int) (const_fixed_from_double_int): Adjust comments. 2013-02-08 Richard Biener PR lto/56231 * lto-streamer.h (struct data_in): Remove current_file, current_line and current_col members. * lto-streamer-out.c (lto_output_location): Stream changed bits en-block for efficiency. * lto-streamer-in.c (clear_line_info): Remove. (lto_input_location): Cache current file, line and column globally via local statics. Read changed bits en-block. (input_function): Do not call clear_line_info. (lto_read_body): Likewise. (lto_input_toplevel_asms): Likewise. 2013-02-08 Michael Matz PR tree-optimization/52448 * tree-ssa-phiopt.c (struct name_to_bb): Add phase member. (nt_call_phase): New static. (add_or_mark_expr): Only mark accesses with newer phase than any call seen. (nonfreeing_call_p): New. (nt_init_block): Update nt_call_phase, mark blocks as visited. (nt_fini_block): Keep blocks marked as visited. (get_non_trapping): Initialize nt_call_phase, and reset aux pointer. 2013-02-08 Richard Biener * ira.c (ira): Free broken dominator information. 2013-02-08 Uros Bizjak * config/i386/i386.c (ix86_spill_class): Use INTEGER_CLASS_P macro. 2013-02-08 Marek Polacek * cfgloop.c (verify_loop_structure): Add more checking of headers. 2013-02-08 Richard Biener PR middle-end/56181 * cfgloop.h (flow_loops_find): Adjust. (bb_loop_header_p): Declare. * cfgloop.c (bb_loop_header_p): New function split out from ... (flow_loops_find): ... here. Adjust function signature, support incremental loop structure update. (verify_loop_structure): Cleanup. Verify a loop is a loop. * cfgloopmanip.c (fix_loop_structure): Move ... * loop-init.c (fix_loop_structure): ... here. (apply_loop_flags): Split out from ... (loop_optimizer_init): ... here. (fix_loop_structure): Use apply_loop_flags. Use flow_loops_find in incremental mode, only remove dead loops here. 2013-02-08 Georg-Johann Lay PR target/54222 * config/avr/avr.md (unspec) : Add. * config/avr/avr-fixed.md (ALL4QA, ALL124QA): New mode iterators. (round3, round3_const): New expanders for fixed-mode. (*round3.libgcc): New insns for fixed-modes. * config/avr/builtins.def (ABSxx): Use a non-NULL LIBNAME. (ROUNDxx, COUNTLSxx, BITSxx, xxBITS): New DEF_BUILTINs. (ROUNDFX, COUNTLSFX, ABSFX): New DEF_BUILTINs. * config/avr/stdfix.h (absFX, bitsFX, FXbits): Remove inline implementations. Define to __builtin_avr_absFX, __builtin_avr_bitsFX, __builtin_avr_FXbits, respectively. (roundFX, countlsFX): Define to __builtin_avr_roundFX, __builtin_avr_countlsFX, respectively. * config/avr/avr-c.c (target.h): Include it. (enum avr_builtin_id): New enum. (avr_resolve_overloaded_builtin): New static function. (avr_register_target_pragmas): Use it to set targetm.resolve_overloaded_builtin. * config/avr/avr.c (avr_init_builtins): Supply myriads of local tree nodes used by DEF_BUILTIN. (avr_expand_builtin) : Sanity-check them. (avr_fold_builtin) : Fold to VIEW_COVERT_EXPR. : Same. 2013-02-08 Richard Biener * cfgloop.c (verify_loop_structure): Properly handle a loop exiting to another loop header. * ira-int.h (ira_loops): Remove. * ira.c (ira_loops): Remove. (ira): Use loop_optimizer_init and loop_optimizer_finalize. (do_reload): Use loop_optimizer_finalize. * ira-build.c (create_loop_tree_nodes): Use get_loops and number_of_loops to access the loop tree. (more_one_region_p): Likewise. (finish_loop_tree_nodes): Likewise. (rebuild_regno_allocno_maps): Likewise. (mark_loops_for_removal): Likewise. (mark_all_loops_for_removal): Likewise. (remove_unnecessary_regions): Likewise. (ira_build): Likewise. * ira-emit.c (setup_entered_from_non_parent_p): Likewise. 2013-02-08 Richard Biener * Makefile.in (tree-tailcall.o): Add $(CFGLOOP_H) dependency. * ipa-pure-const.c (analyze_function): Avoid calling mark_irreducible_loops twice. * tree-tailcall.c (tree_optimize_tail_calls_1): Mark loops for fixup. 2013-02-07 David S. Miller * dwarf2out.c (based_loc_descr): Perform leaf register remapping on 'reg'. * var-tracking.c (vt_add_function_parameter): Test the presence of HAVE_window_save properly and do not remap argument registers when we have a leaf function. 2013-02-07 Uros Bizjak PR bootstrap/56227 * ggc-page.c (ggc_print_statistics): Use HOST_LONG_LONG_FORMAT instead of "ll". * config/i386/i386.c (ix86_print_operand): Ditto. 2013-02-07 Vladimir Makarov * lra-constraints.c (process_alt_operands): Fix recently added comment. 2013-02-07 Vladimir Makarov PR rtl-optimization/56225 * lra-constraints.c (process_alt_operands): Check that reload hard reg can hold value for strict_low_part. 2013-02-07 Jakub Jelinek PR debug/56154 * dwarf2out.c (dwarf2_debug_hooks): Set end_function hook to dwarf2out_end_function. (in_first_function_p, maybe_at_text_label_p, first_loclabel_num_not_at_text_label): New variables. (dwarf2out_var_location): In the first function find out lowest loclabel_num N where .LVLN is known not to be equal to .Ltext0. (find_empty_loc_ranges_at_text_label, dwarf2out_end_function): New functions. 2013-02-07 Eric Botcazou PR rtl-optimization/56178 * cse.c (cse_insn): Do not create a REG_EQUAL note if the source is a SUBREG of a register. Tidy up related block of code. * fwprop.c (forward_propagate_and_simplify): Do not create a REG_EQUAL note if the source is a register or a SUBREG of a register. 2013-02-07 Jakub Jelinek PR target/56228 * config/rs6000/rs6000.md (ptrm): New mode attr. (call_indirect_aix, call_indirect_aix_nor11, call_value_indirect_aix, call_value_indirect_aix_nor11): Use instead of m in constraints. 2013-02-07 Michael Haubenwallner * collect2.c (main): Set aix64_flag for -G and -bsvr4 too, disable if -bnortl. Convert to strcmp and strncmp. 2013-02-07 Alan Modra PR target/54009 * config/rs6000/rs6000.c (mem_operand_gpr): Check that LO_SUM addresses won't wrap when offsetting. (rs6000_secondary_reload): Provide secondary reloads needed for wrapping LO_SUM addresses. 2013-02-06 Thomas Schwinge * config/gnu.h (GNU_USER_TARGET_OS_CPP_BUILTINS): Never define MACH, just __MACH__. 2013-02-06 Richard Biener * tracer.c (tracer): Mark loops with LOOPS_NEED_FIXUP instead of calling fix_loop_structure. 2013-02-06 Jakub Jelinek PR middle-end/56217 * omp-low.c (use_pointer_for_field): Return false if lower_send_shared_vars doesn't generate any copy-out code. 2013-02-06 Tom de Vries PR rtl-optimization/56131 * cfgrtl.c (delete_insn): Use NOTE_BASIC_BLOCK instead of BLOCK_FOR_INSN to get the bb of a NOTE_INSN_BASIC_BLOCK. Handle the case that the bb of the label is NULL. Add comment. 2013-02-05 Jakub Jelinek * tree.h (struct tree_decl_with_vis): Remove thread_local field. PR sanitizer/55374 * config/gnu-user.h (LIBTSAN_EARLY_SPEC): Define. (STATIC_LIBTSAN_LIBS): Likewise. * gcc.c (ADD_STATIC_LIBTSAN_LIBS, LIBTSAN_EARLY_SPEC): Define. (LIBTSAN_SPEC): Add ADD_STATIC_LIBTSAN_LIBS, if LIBTSAN_EARLY_SPEC is defined, don't add anything else beyond that. (SANITIZER_EARLY_SPEC, SANITIZER_SPEC): Define. (LINK_COMMAND_SPEC): Use them. PR tree-optimization/56205 * tree-stdarg.c (check_all_va_list_escapes): Return true if there are any PHI nodes that set non-va_list_escape_vars SSA_NAME and some va_list_escape_vars SSA_NAME appears in some PHI argument. 2013-02-05 Richard Biener PR tree-optimization/53342 PR tree-optimization/53185 * tree-vectorizer.h (vect_check_strided_load): Remove. * tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Do not disallow peeling for vectorized strided loads. (vect_check_strided_load): Make static and simplify. (vect_analyze_data_refs): Adjust. * tree-vect-stmts.c (vectorizable_load): Handle peeled loops correctly when vectorizing strided loads. 2013-02-05 Richard Biener * doc/install.texi: Refer to ISL, not PPL. 2013-02-05 Jan Hubicka PR tree-optimization/55789 * params.def (PARAM_EARLY_INLINER_MAX_ITERATIONS): Drop to 1. 2013-02-05 Jan Hubicka PR tree-optimization/55789 * cgraphclones.c (cgraph_remove_node_and_inline_clones): Remove the dead call anyway. 2013-02-05 Eric Botcazou PR sanitizer/55374 * config/gnu-user.h (LIBASAN_EARLY_SPEC): Add missing guard. 2013-02-04 Alexander Potapenko Jack Howarth Jakub Jelinek PR sanitizer/55617 * config/darwin.c (sort_ctor_records): Stabilized qsort on constructor priority by using original position. (finalize_ctors): New routine to sort constructors by priority before use in assemble_integer. (machopic_asm_out_constructor): Use finalize_ctors if needed. 2013-02-04 Jakub Jelinek PR libstdc++/54314 * config/i386/winnt.c (i386_pe_assemble_visibility): Don't warn about visibility on artificial decls. * config/sol2.c (solaris_assemble_visibility): Likewise. 2013-02-04 Kai Tietz PR target/56186 * config/i386/i386.c (function_value_ms_64): Add additional valtype argument and improve checking of return-argument types for 16-byte modes. (ix86_function_value_1): Add additional valtype argument on call of function_value_64. (return_in_memory_ms_64): Sync 16-byte sized mode handling with handling infunction_value_64 function. 2013-02-04 Matthew Gretton-Dann * reload.c (subst_reloads): Fix DEBUG_RELOAD build issue. 2013-02-04 Richard Biener PR tree-optimization/56188 * tree-ssa-structalias.c (label_visit): Consider case with initially non-empty points-to set. (perform_var_substitution): Dump node mapping and clean up. 2013-02-04 Richard Guenther PR lto/56168 * lto-symtab.c (lto_symtab_merge_decls_1): Make non-builtin node prevail as last resort. (lto_symtab_merge_decls): Remove guard on LTRANS here. (lto_symtab_prevailing_decl): Builtins are their own prevailing decl. 2013-02-04 Richard Biener PR tree-optimization/56113 * tree-ssa-structalias.c (equiv_class_lookup, equiv_class_add): Merge into ... (equiv_class_lookup_or_add): ... this. (label_visit): Adjust and fix error in previous patch. (perform_var_substitution): Adjust. 2013-02-03 Oleg Endo * config/sh/divtab.c: Fix formatting and comments throughout the file. * config/sh/sh4-300.md: Likewise. * config/sh/sh4a.md: Likewise. * config/sh/constraints.md: Likewise. * config/sh/sh.md: Likewise. * config/sh/netbsd-elf.h: Likewise. * config/sh/predicates.md: Likewise. * config/sh/sh-protos.h: Likewise. * config/sh/ushmedia.h: Likewise. * config/sh/linux.h: Likewise. * config/sh/sh.c: Likewise. * config/sh/superh.h: Likewise. * config/sh/elf.h: Likewise. * config/sh/sh4.md: Likewise. * config/sh/sh.h: Likewise. 2013-02-03 John David Anglin * config/pa/constraints.md: Adjust unused letters. Change "T" constraint to match_test floating_point_store_memory_operand(). * config/pa/predicates.md (reg_plus_base_memory_operand): New. (base14_operand): New. (floating_point_store_memory_operand): New. (integer_store_memory_operand): Revise to use base14_operand and reg_plus_base_memory_operand. (move_dest_operand): Allow symbolic_memory_operands. (symbolic_memory_operand): Check for LO_SOM. (symbolic_operand): Change default case to break. * config/pa/pa.md: Remove unamed DFmode and SFmode patterns to force CONST_DOUBLE values to be reloaded by putting them into memory when the destination is a floating point register. (movdf): Remove code to handle CONST_DOUBLE. (movsf): Likewise. (reload_indf_r1): New. (reload_insf_r1): New. Consistently use "Q" and "T" constraints with integer and floating point move instructions, respectively. (movdi): Remove FAIL. Change predicate for source operand unamed DImode move from general_operand to move_src_operand. (umulsidi3): Change predicate for destination operand to register_operand. Likewise for similar unamed patterns. * config/pa/pa-protos.h (pa_legitimize_reload_address): Declare. * config/pa/pa.c (pa_symbolic_expression_p): Remove extra parenthesis. (hppa_legitimize_address): Simplify mask calculation. (pa_emit_move_sequence): Revised handling of secondary reloads from REG+D addresses for floating point loads and stores. Directly handle loading CONST0_RTX (mode) to a floating point register. (pa_secondary_reload): Handle reloading DF and SFmode constant values to floating point registers. Don't restrict secondary reloads to floating point registers to integer modes. Revise some comments and cleanup some code. (TARGET_LEGITIMATE_ADDRESS_P): Define. (pa_legitimate_address_p): New. (pa_legitimize_reload_address): New. * config/pa/pa.h (STRICT_REG_OK_FOR_INDEX_P): New. (STRICT_REG_OK_FOR_BASE_P): New. (GO_IF_LEGITIMATE_ADDRESS): Delete. Update some related comments. (LEGITIMIZE_RELOAD_ADDRESS): Revise to use pa_legitimize_reload_address. 2013-02-03 David Edelsohn Andrew Dixie * collect2.c (GCC_CHECK_HDR): Do not scan objects with F_LOADONLY flag set. 2013-02-03 Richard Sandiford * expmed.c (extract_bit_field_1): Pass the full width of the structure to get_best_reg_extraction_insn. 2013-02-01 David Edelsohn PR target/54601 * configure.ac (use_cxa_atexit): Add AIX. * configure: Regenerate. * config/rs6000/aix61.h (STARTFILE_SPEC): Add crtcxa.o. 2013-02-01 Jakub Jelinek PR debug/54793 * final.c (need_profile_function): New variable. (final_start_function): Drop ATTRIBUTE_UNUSED from first argument. If first of NOTE_INSN_BASIC_BLOCK or NOTE_INSN_FUNCTION_BEG is only preceeded by NOTE_INSN_VAR_LOCATION or NOTE_INSN_DELETED notes, targetm.asm_out.function_prologue doesn't emit anything, HAVE_prologue and profiler should be emitted before prologue, set need_profile_function instead of emitting it. (final_scan_insn): If need_profile_function, emit profile_function on the first NOTE_INSN_BASIC_BLOCK or NOTE_INSN_FUNCTION_BEG note. 2013-02-01 Richard Henderson * config/rs6000/rs6000.md (smulditi3): New. (umulditi3): New. * config/alpha/alpha.md (umulditi3): New. 2013-02-01 David Edelsohn * config/rs6000/xcoff.h (ASM_OUTPUT_ALIGNED_COMMON): Use floor_log2. (ASM_OUTPUT_ALIGNED_LOCAL): New. 2013-02-01 Richard Biener PR tree-optimization/56113 * tree-ssa-structalias.c (label_visit): Reduce work for single-predecessor nodes. 2013-02-01 Eric Botcazou * fold-const.c (make_range_step) : Bail out if the range isn't testing for zero. 2013-01-31 Steven Bosscher PR middle-end/56113 * fwprop.c (fwprop_init): Set up loops without CFG modifications. 2013-01-31 Hiroyuki Ono Nick Clifton * config/v850/constraints.md (Q): Define as a memory constraint. * config/v850/predicates.md (label_ref_operand): New predicate. (e3v5_shift_operand): New predicate. (ior_operator): New predicate. * config/v850/t-v850: Add e3v5 multilib. * config/v850/v850-protos.h (v850_adjust_insn_length): Prototype. (v850_gen_movdi): Prototype. * config/v850/v850.c: Add support for e3v5 architecture. Rename all uses of TARGET_V850E || TARGET_V850E2_ALL to TARGET_V850E_UP. (construct_save_jarl): Add e3v5 long JARL support. (v850_adjust_insn_length): New function. Adjust length of call insns when using e3v5 instructions. (v850_gen_movdi): New function: Generate instructions to move a DImode value. * config/v850/v850.h (TARGET_CPU_v850e3v5): Define. (CPP_SPEC): Define __v850e3v5__ as appropriate. (TARGET_USE_FPU): Enable for e3v5. (CONST_OK_FOR_W): New macro. (ADJUST_INSN_LENGTH): Define. * config/v850/v850.md (UNSPEC_LOOP): Define. (attr cpu): Add v850e3v5. Rename all uses of TARGET_V850E2 to TARGET_V850E2V3_UP. (movdi): New pattern. (movdi_internal): New pattern. (cbranchsf4): Conditionalize on TARGET_USE_FPU. (cbranchdf4): Conditionalize on TARGET_USE_FPU. (cstoresf4): Likewise. (cstoredf4): Likewise. (insv): New pattern. (rotlso3_a): New pattern. (rotlsi3_b): New pattern (rotlsi3_v850e3v5): New pattern. (doloop_begin): New pattern. (fix_loop_counter): New pattern. (doloop_end): New pattern. (branch_normal): Add e3v5 long branch support. (branch_invert): Likewise. (branch_z_normal): Likewise. (branch_z_invert): Likewise. (branch_nz_normal): Likewise. (branch_nz_invert): Likewise. (call_internal_short): Add e3v5 register-indirect JARL support. (call_internal_long): Likewise. (call_value_internal_short): Likewise. (call_value_internal_long): Likewise. * config/v850/v850.opt (mv850e3v5, mv850e2v4): New options. (mloop): New option. * config.gcc: Add support for configuring v840e3v5 target. * doc/invoke.texi: Document new v850 specific command line options. 2013-01-31 Paul Koning PR debug/55059 PR debug/54508 * dwarf2out.c (prune_unused_types_mark): Mark all of parent's children if parent is a class. (prune_unused_types_prune): Don't add DW_AT_declaration. 2013-01-31 Richard Biener PR tree-optimization/56157 * tree-vect-slp.c (vect_get_slp_defs): More thoroughly try to match up operand with SLP child. 2013-01-31 Jason Merrill PR debug/54410 * dwarf2out.c (gen_struct_or_union_type_die): Always schedule template parameters the first time. (gen_scheduled_generic_parms_dies): Check completeness here. 2013-01-31 Richard Biener PR middle-end/53073 * common.opt (faggressive-loop-optimizations): New flag, enabled by default. * doc/invoke.texi (faggressive-loop-optimizations): Document. * tree-ssa-loop-niter.c (estimate_numbers_of_iterations_loop): Guard infer_loop_bounds_from_undefined by it. 2013-01-31 Richard Biener PR tree-optimization/56150 * tree-ssa-loop-manip.c (find_uses_to_rename_stmt): Do not visit virtual operands. (find_uses_to_rename_bb): Likewise. 2013-01-31 Richard Biener PR tree-optimization/56150 * tree-ssa-tail-merge.c (gimple_equal_p): Properly handle mixed store non-store stmts. 2013-01-30 Jakub Jelinek PR sanitizer/55374 * gcc.c (LIBASAN_SPEC): Define just to ADD_STATIC_LIBASAN_LIBS if LIBASAN_EARLY_SPEC is defined. (LIBASAN_EARLY_SPEC): Define to empty string if not already defined. (LINK_COMMAND_SPEC): Add LIBASAN_EARLY_SPEC for -fsanitize=address, before %o. * config/gnu-user.h (LIBASAN_EARLY_SPEC): Define. PR c++/55742 * config/i386/i386.c (ix86_valid_target_attribute_inner_p): Diagnose invalid args instead of ICEing on it. (ix86_valid_target_attribute_tree): Return error_mark_node if ix86_valid_target_attribute_inner_p failed. (ix86_valid_target_attribute_p): Return false only if ix86_valid_target_attribute_tree returned error_mark_node. Allow target("default") attribute. (sorted_attr_string): Change argument from const char * to tree, merge in all target attribute arguments rather than just one. Formatting fix. Use XNEWVEC instead of xmalloc and XDELETEVEC instead of free. Avoid using strcat. (ix86_mangle_function_version_assembler_name): Mangle target("default") as if no target attribute is present. Adjust sorted_attr_string caller. Avoid leaking memory. Use XNEWVEC instead of xmalloc and XDELETEVEC instead of free. (ix86_function_versions): Don't return true if one of the decls doesn't have target attribute. If they don't and one of the decls is DECL_FUNCTION_VERSIONED, report an error. Adjust sorted_attr_string caller. Use XDELETEVEC instead of free. (ix86_supports_function_versions): Remove. (make_name): Fix up formatting. (make_dispatcher_decl): Remove resolver_name and its initialization. Avoid leaking memory. (is_function_default_version): Return true if there is target("default") attribute rather than no target attribute at all. (make_resolver_func): Avoid leaking memory. (ix86_generate_version_dispatcher_body): Likewise. (TARGET_OPTION_SUPPORTS_FUNCTION_VERSIONS): Remove. * target.def (supports_function_versions): Remove. * doc/tm.texi.in (SUPPORTS_FUNCTION_VERSIONS): Remove. * doc/tm.texi: Regenerated. 2013-01-30 Vladimir Makarov PR rtl-optimization/56144 * lra-constraints.c (get_reload_reg): Don't reuse reload pseudo for values with side effects. 2013-01-30 Richard Biener * sparseset.h (sparseset_bit_p): Use gcc_checking_assert. (sparseset_pop): Likewise. * cfganal.c (compute_idf): Likewise. Increase work-stack size to be able to use quick_push in the worker loop. 2013-01-30 Marek Polacek * cfgcleanup.c (cleanup_cfg): Don't mark affected BBs. 2013-01-30 Richard Biener PR lto/56147 * lto-symtab.c (lto_symtab_merge_decls_1): Guard DECL_BUILT_IN check. 2013-01-30 Georg-Johann Lay PR tree-optimization/56064 * fixed-value.c (fixed_from_double_int): New function. * fixed-value.h (fixed_from_double_int): New prototype. (const_fixed_from_double_int): New static inline function. * fold-const.c (native_interpret_fixed): New static function. (native_interpret_expr) : Use it. (can_native_interpret_type_p) : Return true. (native_encode_fixed): New static function. (native_encode_expr) : Use it. (native_interpret_int): Move double_int worker code to... * double-int.c (double_int::from_buffer): ...this new static method. * double-int.h (double_int::from_buffer): Prototype it. 2013-01-30 Richard Biener * tree-ssa-structalias.c (final_solutions, final_solutions_obstack): New pointer-map and obstack. (init_alias_vars): Allocate pointer-map and obstack. (delete_points_to_sets): Free them. (find_what_var_points_to): Cache result. (find_what_p_points_to): Adjust for changed interface of find_what_var_points_to. (compute_points_to_sets): Likewise. (ipa_pta_execute): Likewise. 2013-01-30 Rainer Orth * configure.ac (HAVE_AS_SPARC_NOBITS): New test. * configure: Regenerate. * config.in: Regenerate. * config/sparc/sparc.c (sparc_solaris_elf_asm_named_section): Emit #nobits/#progbits if supported. 2013-01-29 Oleg Endo PR target/56121 * config/sh/sh.md (bclr_m2a, bset_m2a, bst_m2a, bld_m2a, bldsign_m2a, bld_reg, *bld_regqi, band_m2a, bandreg_m2a, bor_m2a, borreg_m2a, bxor_m2a, bxorreg_m2a): Add satisfies_constraint_K03 condition. 2013-01-29 Greta Yorsh * config/arm/cortex-a7.md (cortex_a7_neon, cortex_a7_all): Remove. (cortex_a7_idiv): Use cortex_a7_both instead of cortex_a7_all. 2013-01-29 Greta Yorsh * config/arm/arm.c (cortexa7_younger): Return true for TYPE_CALL. * config/arm/cortex-a7.md (cortex_a7_call): Update required units. 2013-01-29 Greta Yorsh * config/arm/arm-protos.h (arm_mac_accumulator_is_result): New declaration. * config/arm/arm.c (arm_mac_accumulator_is_result): New function. * config/arm/cortex-a7.md: New bypasses using arm_mac_accumulator_is_result. 2013-01-29 Greta Yorsh * config/arm/cortex-a7.md (cortex_a7_neon_mul): New reservation. (cortex_a7_neon_mla): Likewise. (cortex_a7_fpfmad): New reservation. (cortex_a7_fpmacs): Use ffmas and update required units. (cortex_a7_fpmuld): Update required units and latency. (cortex_a7_fpmacd): Likewise. (cortex_a7_fdivs, cortex_a7_fdivd): Likewise. (cortex_a7_neon). Likewise. (bypass) Update participating units. 2013-01-29 Greta Yorsh * config/arm/arm.md (type): Add ffmas and ffmad to "type" attribute. * config/arm/vfp.md (fma,fmsub,fnmsub,fnmadd): Change type from fmac to ffma. * config/arm/vfp11.md (vfp_farith): Use ffmas. (vfp_fmul): Use ffmad. * config/arm/cortex-r4f.md (cortex_r4_fmacs): Use ffmas. (cortex_r4_fmacd): Use ffmad. * config/arm/cortex-m4-fpu.md (cortex_m4_fmacs): Use ffmas. * config/arm/cortex-a9.md (cortex_a9_fmacs): Use ffmas. (cortex_a9_fmacd): Use ffmad. * config/arm/cortex-a8-neon.md (cortex_a8_vfp_macs): Use ffmas. (cortex_a8_vfp_macd): Use ffmad. * config/arm/cortex-a5.md (cortex_a5_fpmacs): Use ffmas. (cortex_a5_fpmacd): Use ffmad. * config/arm/cortex-a15-neon.md (cortex_a15_vfp_macs) Use ffmas. (cortex_a15_vfp_macd): Use ffmad. * config/arm/arm1020e.md (v10_fmul): Use ffmas and ffmad. 2013-01-29 Jason Merrill PR libstdc++/54314 * varasm.c (default_assemble_visibility): Don't warn about visibility on artificial decls. 2013-01-29 Richard Biener PR tree-optimization/56113 * tree-ssa-structalias.c (equiv_class_lookup): Also return the bitmap leader. (label_visit): Free duplicate bitmaps and record the leader instead. (perform_var_substitution): Adjust. 2013-01-29 Richard Biener PR tree-optimization/55270 * tree-ssa-dom.c (eliminate_degenerate_phis): If we changed the CFG, schedule loops for fixup. 2013-01-29 Nick Clifton * config/rl78/rl78.c (rl78_regno_mode_code_ok_for_base_p): Allow SP_REG. 2013-01-28 Leif Ekblad * config.gcc (i[34567]86-*-rdos*, x86_64-*-rdos*): New targets. * config/i386/i386.h (TARGET_RDOS): New macro. (DEFAULT_LARGE_SECTION_THRESHOLD): New macro. * config/i386/i386.c (ix86_option_override_internal): For 64bit TARGET_RDOS, set ix86_cmodel to CM_MEDIUM_PIC and flag_pic to 1. * config/i386/i386.opt (mlarge-data-threshold): Initialize to DEFAULT_LARGE_SECTION_THRESHOLD. * config/i386/i386.md (R14_REG, R15_REG): New constants. * config/i386/rdos.h: New file. * config/i386/rdos64.h: New file. 2013-01-28 Bernd Schmidt PR other/54814 * reload.c (find_valid_class_1): Use in_hard_reg_set_p instead of TEST_HARD_REG_BIT. 2013-01-28 Jakub Jelinek PR rtl-optimization/56117 * sched-deps.c (sched_analyze_2) : For use_cselib call cselib_lookup_from_insn on the MEM before calling add_insn_mem_dependence. 2013-01-28 Richard Biener * tree-inline.c (remap_gimple_stmt): Do not assing a BLOCK to a stmt that didn't have one. (copy_phis_for_bb): Likewise for PHI arguments. (copy_debug_stmt): Likewise for debug stmts. 2013-01-28 Richard Biener PR tree-optimization/56034 * tree-loop-distribution.c (enum partition_kind): Add PKIND_REDUCTION. (partition_builtin_p): Adjust. (generate_code_for_partition): Handle PKIND_REDUCTION. Assert it is the last partition. (rdg_flag_uses): Check SSA_NAME_IS_DEFAULT_DEF before looking up the vertex for the definition. (classify_partition): Classify whether a partition is a PKIND_REDUCTION, thus has uses outside of the loop. (ldist_gen): Inherit PKIND_REDUCTION when merging partitions. Merge all PKIND_REDUCTION partitions into the last partition. (tree_loop_distribution): Seed partitions from reductions as well. 2013-01-28 Jakub Jelinek PR tree-optimization/56125 * tree-ssa-math-opts.c (gimple_expand_builtin_pow): Don't optimize pow(x,c) into sqrt(x) * powi(x, n/2) or 1.0 / (sqrt(x) * powi(x, abs(n/2))) if c is an integer or when optimizing for size. Don't optimize pow(x,c) into powi(x, n/3) * powi(cbrt(x), n%3) or 1.0 / (powi(x, abs(n)/3) * powi(cbrt(x), abs(n)%3)) if 2c is an integer. PR tree-optimization/56094 * gimplify.c (force_gimple_operand_1): Temporarily set input_location to UNKNOWN_LOCATION while gimplifying expr. 2013-01-27 Uros Bizjak PR target/56114 * config/i386/i386.md (*movabs_1): Add square brackets around operand 0 in movabs insn template for -masm=intel asm alternative. (*movabs_2): Ditto for operand 1. 2013-01-26 David Holsgrove PR target/54663 * config.gcc (microblaze*-linux*): Add tmake_file to allow building of microblaze-c.o 2013-01-26 Edgar E. Iglesias * config.gcc (microblaze*-*-*): Rename microblaze*-*-elf, update tm_file. 2013-01-25 Naveen H.S * config/aarch64/aarch64.c (TARGET_FIXED_CONDITION_CODE_REGS): Undef to avoid warning. 2013-01-25 Michael Haubenwallner * configure.ac (gcc_cv_ld_static_dynamic): Define for AIX native ld. * configure: Regenerate. 2013-01-25 Jakub Jelinek PR tree-optimization/56098 * tree-ssa-phiopt.c (nt_init_block): Don't call add_or_mark_expr for stmts with volatile ops. (cond_store_replacement): Don't optimize if assign has volatile ops. (cond_if_else_store_replacement_1): Don't optimize if either then_assign or else_assign have volatile ops. (hoist_adjacent_loads): Don't optimize if either def1 or def2 have volatile ops. 2013-01-25 Georg-Johann Lay * doc/invoke.texi (AVR Built-in Macros): Document __XMEGA__. 2013-01-25 Georg-Johann Lay * doc/extend.texi (Example of asm with clobbered asm reg): Fix missing ':' in asm example. 2013-01-25 Tejas Belagod * config/aarch64/aarch64-simd-builtins.def: Separate sqdmulh_lane entries into lane and laneq entries. * config/aarch64/aarch64-simd.md (aarch64_sqdmulh_lane): Remove AdvSIMD scalar modes. (aarch64_sqdmulh_laneq): New. (aarch64_sqdmulh_lane): New RTL pattern for Scalar AdvSIMD modes. * config/aarch64/arm_neon.h: Fix all the vqdmulh_lane* intrinsics' builtin implementations to relfect changes in RTL in aarch64-simd.md. * config/aarch64/iterators.md (VCOND): New. (VCONQ): New. 2013-01-25 Georg-Johann Lay PR target/54222 * config/avr/builtins.def (DEF_BUILTIN): Add LIBNAME argument. Add NULL LIBNAME argument to existing definitions. (ABSHR, ABSR, ABSLR, ABSLLR, ABSHK, ABSK, ABSLK, ABSLLK): New. * config/avr/avr-c.c (DEF_BUILTIN): Add LIBNAME argument. * config/avr/avr.c (DEF_BUILTIN): Same. (avr_init_builtins): Pass down LIBNAME to add_builtin_function. (avr_expand_builtin): Expand to a vanilla call if a libgcc implementation is available (DECL_ASSEMBLER_NAME is set). (avr_fold_absfx): New static function. (avr_fold_builtin): Use it to handle: AVR_BUILTIN_ABSHR, AVR_BUILTIN_ABSR, AVR_BUILTIN_ABSLR, AVR_BUILTIN_ABSLLR, AVR_BUILTIN_ABSHK, AVR_BUILTIN_ABSK, AVR_BUILTIN_ABSLK, AVR_BUILTIN_ABSLLK. * config/avr/stdfix.h (abshr, absr, abslr, absllr) (abshk, absk, abslk, absllk): Provide as static inline functions. 2013-01-25 Marek Polacek PR tree-optimization/56035 * cfgloopmanip.c (fix_loop_structure): Remove redundant condition. 2012-01-24 Uros Bizjak * config/i386/i386.md (*movti_internal_rex64): Add (o,e) alternative. (*movtf_internal_rex64): Add (!o,C) alternative (*movxf_internal_rex64): Ditto. (*movdf_internal_rex64): Add (?r,C) and (?m,C) alternatives. 2013-01-24 Shenghou Ma * doc/invoke.texi: fix typo. * doc/objc.texi: fix typo. 2013-01-24 Richard Sandiford * config/mips/mips.md (*and3_mips16): Use the "W" constraint for the first two alternatives. 2013-01-24 Diego Novillo * Makefile.in (GGC): Remove. Replace all instances with ggc-page.o. (ggc-zone.o): Remove. * configure.ac: Remove option --with-gc. * configure: Re-generate. * doc/install.texi: Remove documentation for --with-gc. * gengtype.c (write_enum_defn): Remove. Update all users. (write_Types_process_field): Remove generation of gt_e_* argument. (output_type_enum): Remove. Update all users. (write_enum_defn): Remove. Update all users. (enum alloc_zone): Remove. Update all users. (write_splay_tree_allocator_def): Remove generation of gt_e_* argument. * ggc-common.c (ggc_splay_alloc): Remove first argument. Update all callers. (struct ptr_data): Remove field TYPE. Update all users. (gt_pch_note_object): Remove argument TYPE. Update all users. * ggc-internal.h (ggc_pch_alloc_object): Remove last argument. Update all users. * ggc-none.c (ggc_alloc_typed_stat): Remove. (struct alloc_zone): Remove. (ggc_internal_alloc_zone_stat): Remove. (ggc_internal_cleared_alloc_zone_stat): Remove. * ggc-page.c (ggc_alloc_typed_stat): Remove. (ggc_pch_count_object): Remove last argument. Update all users. (ggc_pch_alloc_object): Remove last argument. Update all users. (struct alloc_zone): Remove. * ggc-zone.c: Remove. * ggc.h (gt_pch_note_object): Remove last argument. Update all users. (struct alloc_zone): Remove. (ggc_alloc_typed_stat): Remove. (ggc_alloc_typed): Remove. (ggc_splay_alloc): Remove first argument. (rtl_zone): Remove. Update all users. (tree_zone): Remove. Update all users. (tree_id_zone): Remove. Update all users. (ggc_internal_zone_alloc_stat): Remove. Update all users. (ggc_internal_zone_cleared_alloc_stat): Remove. Update all users. (ggc_internal_zone_vec_alloc_stat): Remove. Update all users. * tree-ssanames.c: Remove references to zone allocator in comments. 2013-01-24 Georg-Johann Lay * config/avr/avr.c (avr_out_fract): Make register numbers that might be outside of source operand signed. 2013-01-24 Uros Bizjak * config/i386/constraints.md (Yf): New constraint. * config/i386/i386.md (*movdf_internal_rex64): Use Yf*f instead of f constraint to conditionaly disable x87 register preferences. (*movdf_internal): Ditto. (*movsf_internal): Ditto. 2013-01-24 Steven Bosscher PR inline-asm/55934 * lra-assigns.c (assign_by_spills): Throw away the pattern of asms that have operands with impossible constraints. Add a FIXME for a speed-up opportunity. * lra-constraints.c (process_alt_operands): Verify that a class selected from constraints on asms is valid for the operand mode. (curr_insn_transform): Remove incorrect comment. 2013-01-23 David Edelsohn * config/rs6000/rs6000.c (rs6000_delegitimize_address): Check that TOC operand is a valid symbol ref in the constant pool. 2013-01-23 Edgar E. Iglesias * config/microblaze/linux.h: Add TARGET_OS_CPP_BUILTINS 2013-01-23 Georg-Johann Lay PR target/54222 * config/avr/stdfix.h: New file. * t-avr (stdfix-gcc.h): New rule to build it. (EXTRA_HEADERS): Set it to install stdfix.h, stdfix-gcc.h. 2013-01-23 Kostya Serebryany * config/darwin.h: remove dependency on CoreFoundation (asan on Mac OS). 2013-01-23 Jakub Jelinek PR target/49069 * config/arm/arm.md (cbranchdi4, cstoredi4): Use s_register_operand instead of cmpdi_operand for first comparison operand. Don't assert that comparison operands aren't both constants. 2013-01-22 Jonathan Wakely * doc/install.texi (Downloading the Source): Update references to downloading separate components. 2013-01-22 Jonathan Wakely * doc/extend.texi (__int128): Improve grammar. 2013-01-22 Uros Bizjak PR target/56028 * config/i386/i386.md (*movti_internal_rex64): Change (o,riF) alternative to (o,r). (*movdi_internal_rex64): Remove (!o,n) alternative. (DImode immediate->memory splitter): Remove. (DImode immediate->memory peephole2): Remove. (movtf): Enable for TARGET_64BIT || TARGET_SSE. (*movtf_internal_rex64): Rename from *movtf_internal. Change (!o,F*r) alternative to (!o,*r). (*movtf_internal_sse): New pattern. (*movxf_internal_rex64): New pattern. (*movxf_internal): Disable for TARGET_64BIT. (*movdf_internal_rex64): Remove (!o,F) alternative. 2013-01-22 Jakub Jelinek PR middle-end/56074 * dumpfile.c (dump_loc): Only print loc if LOCATION_LOCUS (loc) isn't UNKNOWN_LOCATION nor BUILTINS_LOCATION. * tree-vect-loop-manip.c (find_loop_location): Also ignore stmt locations where LOCATION_LOCUS of the stmt location is UNKNOWN_LOCATION or BUILTINS_LOCATION. PR target/55686 * config/i386/i386.md (UNSPEC_STOS): New. (strset_singleop, *strsetdi_rex_1, *strsetsi_1, *strsethi_1, *strsetqi_1): Add UNSPEC_STOS. 2013-01-22 Paolo Carlini PR c++/56067 * doc/invoke.texi: Remove left over -Wsynth example. 2013-01-21 Jakub Jelinek PR tree-optimization/56051 * fold-const.c (fold_binary_loc): Don't fold X < (cast) (1 << Y) into (X >> Y) != 0 if cast is either a narrowing conversion, or widening conversion from signed to unsigned. 2013-01-21 Uros Bizjak PR rtl-optimization/56023 * haifa-sched.c (fix_inter_tick): Do not update ticks of instructions, dependent on debug instruction. 2013-01-21 Martin Jambor PR middle-end/56022 * function.c (allocate_struct_function): Call invoke_set_current_function_hook earlier. 2013-01-21 Jakub Jelinek * reload1.c (init_reload): Only initialize reload_obstack during the first call. 2013-01-21 Marek Polacek * cfgloop.c (verify_loop_structure): Fix up grammar. 2013-01-21 Yi-Hsiu Hsu * config/arm/marvell-pj4.md (pj4_shift_conds, pj4_alu_shift, pj4_alu_shift_conds, pj4_shift): Handle simple_alu_shift. 2013-01-21 Ramana Radhakrishnan PR target/56058 * config/arm/marvell-pj4.md: Update copyright year. Fix up use of alu to alu_reg and simple_alu_imm. 2013-01-21 Uros Bizjak * config/i386/i386.md (enabled): Do not disable fma4 for TARGET_FMA. 2013-01-20 Vladimir Makarov PR target/55433 * lra-constraints.c (curr_insn_transform): Don't reuse original insn for secondary memory move when memory mode should be different. 2013-01-20 John David Anglin * config/pa/pa.md (atomic_loaddi, atomic_loaddi_1, atomic_storedi, atomic_storedi_1): New patterns. 2013-01-20 Venkataramanan Kumar btver2 pipeline descriptions. * config/i386/i386.c: Enable CPU_BTVER2 to use btver2 pipeline descriptions. * config/i386/i386.md (btver2_decode): New type attributes. * config/i386/sse.md (btver2_decode, btver2_sse_attr): New type attributes. * config/i386/btver2.md: New file describing btver2 pipelines. 2013-01-19 Andrew Pinski PR tree-optimization/52631 * tree-ssa-sccvn (visit_use): Before looking up the original statement, try looking up the simplified expression. 2013-01-19 Anthony Green * config/moxie/moxie.c (moxie_expand_prologue): Set current_function_static_stack_size. 2013-01-18 Jakub Jelinek PR tree-optimization/56029 * tree-phinodes.c (reserve_phi_args_for_new_edge): Set gimple_phi_arg_location for the new arg to UNKNOWN_LOCATION. 2013-01-18 Sharad Singhai PR tree-optimization/55995 * dumpfile.c (dump_loc): Print location only if available. * tree-vectorizer.c (increase_alignment): Intialize vect_location. 2013-01-18 Vladimir Makarov PR target/55433 * lra-constraints.c (curr_insn_transform): Reuse original insn for secondary memory move. (inherit_reload_reg): Use rclass instead of cl for check_secondary_memory_needed_p. 2013-01-18 Jakub Jelinek PR middle-end/56015 * expr.c (expand_expr_real_2) : Handle the case where writing real complex part of target modifies op1. 2013-01-18 James Greenhalgh * config/aarch64/aarch64-simd.md (aarch64_vcond_internal): Handle unordered cases. * config/aarch64/iterators.md (v_cmp_result): New. 2013-01-18 Yi-Hsiu Hsu Ramana Radhakrishnan * config/arm/marvell-pj4.md: New file. * config/arm/arm.c (arm_issue_rate): Add marvell_pj4. * config/arm/arm.md (generic_sched): Add marvell_pj4. (generic_vfp): Likewise. * config/arm/arm-cores.def: Add marvell-pj4. * config/arm/arm-tune.md: Regenerate. * config/arm/arm-tables.opt: Regenerate. * config/arm/bpabi.h (BE8_LINK_SPEC): Add marvell_pj4. * doc/invoke.texi: Document marvell-pj4. 2013-01-18 Tejas Belagod * config/aarch64/arm_neon.h: Map scalar types to standard types. 2013-01-18 Alexandre Oliva PR debug/54114 PR debug/54402 PR debug/49888 * var-tracking.c (negative_power_of_two_p): New. (global_get_addr_cache, local_get_addr_cache): New. (get_addr_from_global_cache, get_addr_from_local_cache): New. (vt_canonicalize_addr): Rewrite using the above. Adjust the heading comment. (vt_stack_offset_p): Remove. (vt_canon_true_dep): Always canonicalize loc's address. (clobber_overlapping_mems): Make sure we have a MEM. (local_get_addr_clear_given_value): New. (val_reset): Clear local cached entries. (compute_bb_dataflow): Create and release the local cache. Disable duplicate MEMs clobbering. (emit_notes_in_bb): Clobber MEMs likewise. (vt_emit_notes): Create and release the local cache. (vt_initialize, vt_finalize): Create and release the global cache, respectively. * alias.c (rtx_equal_for_memref_p): Compare operands of ENTRY_VALUEs. 2013-01-18 Alexandre Oliva PR libmudflap/53359 * tree-mudflap.c (mudflap_finish_file): Skip deferred decls not found in the symtab. 2013-01-18 Alexandre Oliva PR debug/56006 PR rtl-optimization/55547 PR rtl-optimization/53827 PR debug/53671 PR debug/49888 * alias.c (offset_overlap_p): New, factored out of... (memrefs_conflict_p): ... this. Use absolute sizes. Retain the conservative special case for symbolic constants. Don't adjust zero sizes on alignment. 2013-01-18 Bernd Schmidt PR rtl-optimization/52573 * regrename.c (build_def_use): Ignore REG_DEAD notes if there is a REG_UNUSED for the same register. 2013-01-17 Richard Biener Marek Polacek PR rtl-optimization/55833 * loop-unswitch.c (unswitch_loops): Move loop verification... (unswitch_single_loop): ...here. Call mark_irreducible_loops. * cfgloopmanip.c (fix_loop_placement): Add IRRED_INVALIDATED parameter. Set it to true when we're removing a loop from hierarchy tree in an irreducible region. (fix_bb_placements): Adjust caller. (fix_loop_placements): Likewise. 2013-01-17 Georg-Johann Lay * config/avr/builtins.def (DEF_BUILTIN): Factor out "__builtin_avr_" from NAME, turn NAME to an uppercase identifier. Factor out 'CODE_FOR_' from ICODE, use 'nothing' instead of '-1'. Remove ID. Adjust comments. * config/avr/avr-c.c (avr_builtin_name): Remove. (avr_cpu_cpp_builtins): Use DEF_BUILTIN instead of for-loop. * config/avr/avr.c (avr_tolower): New static function. (DEF_BUILTIN): Remove parameter ID. Prefix ICODE by 'CODE_FOR_'. Stringify NAME, prefix it with "__builtin_avr_" and lowercase it. (avr_expand_builtin): Assert insn_code != CODE_FOR_nothing for default expansion. 2013-01-17 Jan Hubicka PR tree-optimization/55273 * loop-iv.c (iv_number_of_iterations): Consider zero iteration case. 2013-01-17 Uros Bizjak PR target/55981 * config/i386/sync.md (atomic_store): Always generate SWImode store through atomic_store_1. (atomic_store_1): Macroize insn using SWI mode iterator. 2013-01-17 Martin Jambor PR tree-optimizations/55264 * ipa-inline-transform.c (can_remove_node_now_p_1): Never return true for virtual methods. * ipa.c (symtab_remove_unreachable_nodes): Never return true for virtual methods before inlining is over. * cgraph.h (cgraph_only_called_directly_or_aliased_p): Return false for virtual functions. * cgraphclones.c (cgraph_create_virtual_clone): Mark clones as non-virtual. 2013-01-16 Vladimir Makarov PR rtl-optimization/56005 * sched-deps.c (sched_analyze_2): Check deps->readonly for adding pending reads for prefetch. 2013-01-16 Ian Bolton * config/aarch64/aarch64.md (*cstoresi_neg_uxtw): New pattern. (*cmovsi_insn_uxtw): New pattern. (*si3_uxtw): New pattern. (*_si3_uxtw): New pattern. (*si3_insn_uxtw): New pattern. (*bswapsi2_uxtw): New pattern. 2013-01-16 Richard Biener * tree-inline.c (tree_function_versioning): Remove set but never used variable. 2013-01-16 Richard Biener PR tree-optimization/55964 * tree-flow.h (rename_variables_in_loop): Remove. (rename_variables_in_bb): Likewise. * tree-loop-distribution.c (update_phis_for_loop_copy): Remove. (copy_loop_before): Adjust and delete update-ssa status. * tree-vect-loop-manip.c (rename_variables_in_bb): Make static. (rename_variables_in_bb): Likewise. Properly walk over predecessors. (rename_variables_in_loop): Remove. (slpeel_update_phis_for_duplicate_loop): Likewise. (slpeel_tree_duplicate_loop_to_edge_cfg): Handle nested loops, use available cfg machinery instead of duplicating it. Update PHI nodes and perform poor-mans SSA update here. (slpeel_tree_peel_loop_to_edge): Adjust. 2013-01-16 Richard Biener PR tree-optimization/54767 PR tree-optimization/53465 * tree-vrp.c (vrp_meet_1): Revert original fix for PR53465. (vrp_visit_phi_node): For PHI arguments coming via backedges drop all symbolical range information. (execute_vrp): Compute backedges. 2013-01-16 Richard Biener * doc/install.texi: Update CLooG and ISL requirements to 0.18.0 and 0.11.1. 2013-01-16 Christian Bruel PR target/55301 * config/sh/sh.c (sh_expand_prologue): Postpone new_stack mem symbol. (broken_move): Handle UNSPECV_SP_SWITCH_B. * config/sh/sh.md (sp_switch_1): Use set (reg:SI SP_REG). 2013-01-16 DJ Delorie * config/sh/sh.md (UNSPECV_SP_SWITCH_B): New. (UNSPECV_SP_SWITCH_E): New. (sp_switch_1): Change to an unspec. (sp_switch_2): Change to an unspec. Don't use post-inc when we replace $r15. 2013-01-16 Uros Bizjak * emit-rtl.c (need_atomic_barrier_p): Mask memory model argument with MEMMODEL_MASK before comparing with MEMMODEL_* memory types. * optabs.c (maybe_emit_sync_lock_test_and_set): Ditto. (expand_mem_thread_fence): Ditto. (expand_mem_signal_fence): Ditto. (expand_atomic_load): Ditto. (expand_atomic_store): Ditto. 2013-01-16 Alexandre Oliva PR rtl-optimization/55547 PR rtl-optimization/53827 PR debug/53671 PR debug/49888 * alias.c (memrefs_conflict_p): Set sizes to negative after AND adjustments. 2013-01-15 Jakub Jelinek PR target/55940 * function.c (thread_prologue_and_epilogue_insns): Always add crtl->drap_reg to set_up_by_prologue.set, even if stack_realign_drap is false. 2013-01-15 Jan-Benedict Glaw * config/vax/vax.md (add3, sub3, mul3, div3, and3, *and_const_int, ior3, xor3, ashrsi3, *call): Fix indention. 2013-01-15 Tom de Vries PR target/55876 * optabs.c (widen_operand): Use gen_lowpart instead of gen_rtx_SUBREG. Update comment. 2013-01-15 Vladimir Makarov PR rtl-optimization/55153 * sched-deps.c (sched_analyze_2): Add pending reads for prefetch. 2013-01-15 Martin Jambor PR tree-optimization/55920 * tree-sra.c (analyze_access_subtree): Do not mark non-removable accesses as grp_to_be_debug_replaced. 2013-01-15 Jakub Jelinek PR tree-optimization/55920 * tree-sra.c (sra_modify_assign): If for lacc->grp_to_be_debug_replaced there is non-useless type conversion needed from debug rhs to lhs, use build_debug_ref_for_model and/or VIEW_CONVERT_EXPR. 2013-01-15 Joseph Myers Mikael Pettersson PR target/43961 * config/arm/arm.h (ADDR_VEC_ALIGN): Align SImode jump tables for Thumb. (ASM_OUTPUT_CASE_LABEL): Remove. (ASM_OUTPUT_BEFORE_CASE_LABEL): Define to empty. * final.c (shorten_branches): Update alignment of labels before jump tables if CASE_VECTOR_SHORTEN_MODE. 2013-01-15 Richard Biener PR bootstrap/55961 * system.h: Do not include gmp.h for building host tools. 2013-01-15 Richard Biener PR middle-end/55882 * emit-rtl.c (set_mem_attributes_minus_bitpos): Correctly account for bitpos when computing alignment. 2013-01-15 Vladimir Yakovlev * config/i386/i386-c.c (ix86_target_macros_internal): New case. (ix86_target_macros_internal): Likewise. * config/i386/i386.c (m_CORE2I7): Removed. (m_CORE_HASWELL): New macro. (m_CORE_ALL): Likewise. (initial_ix86_tune_features): m_CORE2I7 is replaced by m_CORE_ALL. (initial_ix86_arch_features): Likewise. (processor_target_table): Initializations for Core avx2. (cpu_names): New names "core-avx2". (ix86_option_override_internal): Changed PROCESSOR_COREI7 by PROCESSOR_CORE_HASWELL. (ix86_issue_rate): New case. (ia32_multipass_dfa_lookahead): Likewise. (ix86_sched_init_global): Likewise. * config/i386/i386.h (TARGET_HASWELL): New macro. (target_cpu_default): New TARGET_CPU_DEFAULT_haswell. (processor_type): New PROCESSOR_HASWELL. 2013-01-15 Jakub Jelinek PR tree-optimization/55955 * tree-vect-loop.c (vectorizable_reduction): Give up early on *SHIFT_EXPR and *ROTATE_EXPR codes. PR tree-optimization/48766 * opts.c (common_handle_option): For -fwrapv disable -ftrapv, for -ftrapv disable -fwrapv. 2013-01-14 Georg-Johann Lay PR target/55974 * config/avr/avr-c.c (avr_cpu_cpp_builtins): Define __FLASH etc. to 1 and not to __flash. Use LL suffix for __INT24_MAX__ with -mint8. Use ULL suffix for __UINT24_MAX__ with -mint8. 2013-01-14 Georg-Johann Lay * config/avr/avr-arch.h (struct base_arch_s): Use typedef avr_arch_t instead. (struct arch_info_s): Use typedef avr_arch_info_t instead. (struct mcu_type_s): Use typedef avr_mcu_t instead. * config/avr/avr.c: Same. * config/avr/avr-devices.c: Same. * config/avr/driver-avr.c: Same. * config/avr/gen-avr-mmcu-texi.c: Same. * config/avr/avr-mcus.def: Adjust comment. 2013-01-14 Tejas Belagod * config/aarch64/aarch64-simd.md (*aarch64_simd_ld1r): New. * config/aarch64/iterators.md (VALLDI): New. 2013-01-14 Uros Bizjak Andi Kleen PR target/55948 * config/i386/sync.md (atomic_store_1): New pattern. (atomic_store): Call atomic_store_1 for IX86_HLE_RELEASE memmodel flag. 2013-01-14 Georg-Johann Lay * config/avr/avr-stdint.h: Remove trailing blanks. * config/avr/avr-log.h: Same. * config/avr/avr-arch.h: Same. * config/avr/avr-devices.c: Same. * config/avr/avr-dimode.md: Same. * config/avr/predicates.md: Same. * config/avr/avr-c.c: Same. And fix typo. * config/avr/avr-protos.h: Same. And: (function_arg_regno_p): Rename to avr_function_arg_regno_p. (init_cumulative_args): Rename to avr_init_cumulative_args. (expand_prologue): Rename to avr_expand_prologue. (expand_epilogue): Rename to avr_expand_epilogue. (adjust_insn_length): Rename to avr_adjust_insn_length. (notice_update_cc): Rename to avr_notice_update_cc. (final_prescan_insn): Rename to avr_final_prescan_insn. * config/avr/avr.c: Same. * config/avr/avr.h: Same. * config/avr/avr.md: Remove trailing blanks. (prologue): Use avr_expand_prologue. (epilogue, sibcall_epilogue): Use avr_expand_epilogue. 2013-01-14 Richard Biener * tree-cfg.c (verify_expr_location, verify_expr_location_1, verify_location, collect_subblocks): New functions. (verify_gimple_in_cfg): Verify that locations only reference BLOCKs in the functions BLOCK tree. 2013-01-14 Richard Biener * tree-cfgcleanup.c (remove_forwarder_block): Unshare propagated PHI argument. * graphite-sese-to-poly.c (insert_out_of_ssa_copy): Properly unshare reference. (insert_out_of_ssa_copy_on_edge): Likewise. (rewrite_close_phi_out_of_ssa): Likewise. * tree-ssa.c (insert_debug_temp_for_var_def): Properly unshare debug expressions. * tree-ssa-pre.c (insert_into_preds_of_block): Properly unshare propagated constants. * tree-cfg.c (tree_node_can_be_shared): Handled component-refs can not be shared. 2013-01-14 Georg-Johann Lay * config/avr/avr-modes.def: Add GPL copyright notice. 2013-01-13 Uros Bizjak * config/i386/sync.md (mem_thread_fence): Mask operands[0] with MEMMODEL_MASK to determine memory model. (atomic_store): Ditto from operands[2]. * config/i386/i386.c (ix86_memmodel_check): Declare "strong" as bool. 2013-01-13 Jakub Jelinek PR fortran/55935 * gimple-fold.c (get_symbol_constant_value): Call unshare_expr. (fold_gimple_assign): Don't call unshare_expr here. (fold_ctor_reference): Call unshare_expr. 2013-01-13 Terry Guo * Makefile.in (s-mlib): New argument MULTILIB_REUSE. * doc/fragments.texi: Document MULTILIB_REUSE. * gcc.c (multilib_reuse): New internal spec. (set_multilib_dir): Also search multilib from multilib_reuse. * genmultilib (tmpmultilib3): Refactor code. (tmpmultilib4): Ditto. (multilib_reuse): New multilib argument. 2013-01-13 Richard Sandiford * Makefile.in: Update copyright. 2013-01-12 Tom de Vries PR middle-end/55890 * calls.c (expand_call): Check if arg_nr is valid. 2013-01-11 Michael Meissner * doc/extend.texi (X86 Built-in Functions): Add whitespace in __builtin_ia32_paddb256 and __builtin_ia32_pavgb256 documentation. Add missing '__' in front of __builtin_ia32_packssdw256. 2013-01-11 Andreas Krebbel PR target/55719 * config/s390/s390.c (s390_preferred_reload_class): Do not return NO_REGS for larl operands. (s390_reload_larl_operand): Use s390_load_address instead of emit_move_insn. 2013-01-11 Richard Biener * tree-cfg.c (verify_node_sharing_1): Split out from ... (verify_node_sharing): ... here. (verify_gimple_in_cfg): Use verify_node_sharing_1 for walk_tree. 2013-01-11 Eric Botcazou * configure.ac (Tree checking): Set TREECHECKING to yes if enabled. Substitute TREECHECKING. * configure: Regenerate. * Makefile.in (TREECHECKING): New. 2013-01-11 Richard Guenther PR tree-optimization/44061 * tree-vrp.c (extract_range_basic): Compute zero as value-range for __builtin_constant_p of function parameters. 2013-01-10 Richard Sandiford Update copyright years. 2013-01-10 Vladimir Makarov PR rtl-optimization/55672 * lra-eliminations.c (mark_not_eliminable): Permit addition with const to be eliminable. 2013-01-10 David Edelsohn * configure.ac (HAVE_AS_TLS): Add check for powerpc-ibm-aix. * configure: Regenerate. 2013-01-10 Richard Biener * builtins.c (expand_builtin_init_trampoline): Use set_mem_attributes. 2013-01-10 Richard Biener PR bootstrap/55792 * tree-into-ssa.c (rewrite_add_phi_arguments): Do not set locations for virtual PHI arguments. (rewrite_update_phi_arguments): Likewise. 2013-01-10 Joel Sherrill * config/v850/rtems.h (ASM_SPEC): Pass -m8byte-align and -mgcc-abi on to assembler. 2013-01-10 Jakub Jelinek PR tree-optimization/55921 * tree-complex.c (expand_complex_asm): New function. (expand_complex_operations_1): Call it for GIMPLE_ASM. 2013-01-10 Andreas Krebbel PR target/55718 * config/s390/s390.c (s390_symref_operand_p) (s390_loadrelative_operand_p): Merge the two functions. (s390_check_qrst_address, print_operand_address): Add parameters to s390_loadrelative_operand_p invokation. (s390_check_symref_alignment): Use s390_loadrelative_operand_p. (s390_reload_larl_operand, s390_secondary_reload): Use s390_loadrelative_operand_p instead of s390_symref_operand_p. (legitimize_pic_address): Handle @GOTENT and @PLT + addend. 2013-01-09 Mike Stump * dse.c (record_store): Remove unnecessary assert. 2013-01-09 Jan Hubicka PR tree-optimization/55569 * cfgloopmanip.c (scale_loop_profile): Make ITERATION_BOUND gcov_type. * cfgloop.h (scale_loop_profile): Likewise. 2013-01-09 Jan Hubicka PR lto/45375 * ipa-inline.c (ipa_inline): Remove extern inlines and virtual functions. * cgraphclones.c (cgraph_clone_node): Cpoy also LTO file data. 2013-01-09 Richard Sandiford PR middle-end/55114 * expr.h (maybe_emit_group_store): Declare. * expr.c (maybe_emit_group_store): New function. * builtins.c (expand_builtin_int_roundingfn): Call it. (expand_builtin_int_roundingfn_2): Likewise. 2013-01-09 Vladimir Makarov PR rtl-optimization/55829 * lra-constraints.c (match_reload): Add code for absent output. (curr_insn_transform): Add code for reloads of matched inputs without output. 2013-01-09 Uros Bizjak * config/i386/sse.md (*vec_interleave_highv2df): Change mode attribute of movddup insn to DF. (*vec_interleave_lowv2df): Ditto. (vec_dupv2df): Ditto. 2013-01-09 Jan Hubicka PR tree-optimiation/55875 * tree-ssa-loop-niter.c (number_of_iterations_cond): Add EVERY_ITERATION parameter. (number_of_iterations_exit): Check if exit is executed every iteration. (idx_infer_loop_bounds): Similarly here. (n_of_executions_at_most): Simplify to only test for cases where statement is dominated by the particular bound; handle correctly the "postdominance" test. (scev_probably_wraps_p): Use max loop iterations info as a global bound first. 2013-01-09 Nguyen Duy Dat Nick Clifton * config/v850/v850.md (cbranchsf4): New pattern. (cstoresf4): New pattern. (cbranchdf4): New pattern. (cstoredf4): New pattern. (movsicc): Disallow floating point comparisons. (cmpsf_le_insn): Fix order of operators. (cmpsf_lt_insn): Likewise. (cmpsf_eq_insn): Likewise. (cmpdf_le_insn): Likewise. (cmpdf_lt_insn): Likewise. (cmpdf_eq_insn): Likewise. (cmpsf_ge_insn): Use LE comparison. (cmpdf_ge_insn): Likewise. (cmpsf_gt_insn): Use LT comparison. (cmpdf_gt_insn): Likewise. (cmpsf_ne_insn): Delete pattern. (cmpdf_ne_insn): Delete pattern. * config/v850/v850.c (v850_gen_float_compare): Use gen_cmpdf_eq_insn for NE comparison. (v850_float_z_comparison_operator) (v850_float_nz_comparison_operator): Move from here ... * config/v850/predicates.md: ... to here. Move GT and GE comparisons into v850_float_z_comparison_operator. * config/v850/v850-protos.h (v850_float_z_comparison_operator): Delete prototype. (v850_float_nz_comparison_operator): Likewise. 2013-01-09 John David Anglin * config/pa/pa.c (pa_emit_move_sequence): Replace calls to gen_insv with calls to gen_insvsi/gen_insvdi. 2013-01-09 Venkataramanan Kumar * config/i386/i386.c (initial_ix86_tune_features): Set up X86_TUNE_AVX128_OPTIMAL for m_BTVER2. 2013-01-09 Steven Bosscher Jakub Jelinek PR tree-optimization/48189 * predict.c (predict_loops): If max is 0, don't call compare_tree_int. If nitercst is 0, don't predict the exit edge. 2013-01-08 Naveen H.S * config/aarch64/aarch64.c (aarch64_print_operand): Replace %r in asm_fprintf with reg_names. (aarch64_print_operand_address): Likewise. (aarch64_return_addr): Likewise. * config/aarch64/aarch64.h (ASM_FPRINTF_EXTENSIONS): Remove. 2013-01-08 John David Anglin * config/pa/pa.h (VAL_U6_BITS_P): Define. (INT_U6_BITS): Likewise. * config/pa/predicates.md (uint6_operand): New predicate. (shift5_operand, shift6_operand): Likewise. * config/pa/pa.md (lshrsi3, rotrsi3): Use shift5_operand instead of arith32_operand. (lshrdi3): Use shift6_operand. (shrpsi4, shrpdi4): New insn patterns. (extzv): Delete expander. (extzvsi, extzvdi): New expanders. Use uint5_operand and uint6_operand predicates in unamed zero extract patterns. Tighten common constraint. (extv): Delete expander. (extvsi, extvdi): New expanders. Use uint5_operand and uint6_operand predicates in unamed sign extract patterns. Tighten common constraint. (insv): Delete expander. (insvsi, insvdi): New expanders. Use uint5_operand and uint6_operand predicates in unamed insert patterns. Tighten common constraint. Change uint32_operand predicate to uint6_operand predicate in unamed DImode pattern to insert constant values of type 1...1xxxx. 2013-01-04 Jan Hubicka PR tree-optimization/55823 * ipa-prop.c (update_indirect_edges_after_inlining): Fix ordering issue. 2013-01-08 Jakub Jelinek Uros Bizjak PR rtl-optimization/55845 * df-problems.c (can_move_insns_across): Stop scanning at volatile_insn_p source instruction or give up if across_from .. across_to range contains any volatile_insn_p instructions. 2013-01-08 Tejas Belagod * config/aarch64/aarch64-simd.md (vec_init): New. * config/aarch64/aarch64-protos.h (aarch64_expand_vector_init): Declare. * config/aarch64/aarch64.c (aarch64_simd_dup_constant, aarch64_simd_make_constant, aarch64_expand_vector_init): New. 2013-01-08 Jakub Jelinek PR fortran/55341 * asan.c (asan_clear_shadow): New function. (asan_emit_stack_protection): Use it. 2013-01-08 Tejas Belagod * config/aarch64/aarch64-simd.md (aarch64_simd_vec_mult_lo_, aarch64_simd_vec_mult_hi_): Separate instruction and operand with tab instead of space. 2013-01-08 Nick Clifton * config/rl78/rl78.c (rl78_expand_prologue): Always select register bank 0 at the start of an interrupt handler. * config/rl78/rl78.md (mulsi3_g13): Correct values for MDBL and MDBH registers. 2013-01-08 James Greenhalgh * config/aarch64/aarch64-simd.md (aarch64_simd_bsl_internal): Add floating-point modes. (aarch64_simd_bsl): Likewise. (aarch64_vcond_internal): Likewise. (vcond): Likewise. (aarch64_cm): Fix constraints, add new modes. * config/aarch64/iterators.md (V_cmp_result): Add V2DF. 2013-01-08 James Greenhalgh * config/aarch64/aarch64-builtins.c (aarch64_builtin_vectorized_function): Handle sqrt, sqrtf. 2013-01-08 Martin Jambor PR debug/55579 * tree-sra.c (analyze_access_subtree): Return true also after potentially creating a debug-only replacement. 2013-01-08 Jakub Jelinek PR middle-end/55890 * tree-ssa-ccp.c (evaluate_stmt): Use gimple_call_builtin_p. PR tree-optimization/54120 * tree-vrp.c (range_fits_type_p): Don't allow src_precision < precision from signed vr to unsigned_p if vr->min or vr->max is negative. (simplify_float_conversion_using_ranges): Test can_float_p against CODE_FOR_nothing. 2013-01-08 Jakub Jelinek Richard Biener PR middle-end/55851 * fold-const.c (int_binop_types_match_p): Allow all INTEGRAL_TYPE_P types instead of just INTEGER_TYPE types. 2013-01-07 Mark Kettenis * config/i386/openbsdelf.h (LIBGCC2_HAS_TF_MODE, LIBGCC2_TF_CEXT, TF_SIZE): Define. 2013-01-07 Steve Ellcey PR target/42661 * config/mips/mips.opt: Change mad to mmad to match documentation. 2013-01-07 Georg-Johann Lay PR target/55897 * doc/extend.texi (AVR Named Address Spaces): __memx goes into .progmemx.data now. 2013-01-07 Georg-Johann Lay PR target/55897 * config/avr/avr.h (ADDR_SPACE_COUNT): New enum. (avr_addrspace_t): Add .section_name field. * config/avr/avr.c (progmem_section): Use ADDR_SPACE_COUNT as array size. (avr_addrspace): Same. Initialize .section_name. Remove last NULL entry. Put __memx into .progmemx.data. (progmem_section_prefix): Remove. (avr_asm_init_sections): No need to initialize progmem_section. (avr_asm_named_section): Use avr_addrspace[].section_name to get section name prefix. (avr_asm_select_section): Ditto. And use get_unnamed_section to retrieve the progmem section. * avr-c.c (avr_cpu_cpp_builtins): Use ADDR_SPACE_COUNT as loop boundary to run over avr_addrspace[]. (avr_register_target_pragmas): Ditto. 2013-01-06 Jakub Jelinek * varasm.c (output_constant_def_contents): For asan_protect_global protected strings, adjust DECL_ALIGN if needed, before testing for anchored symbols. (place_block_symbol): Adjust size for asan protected STRING_CSTs if TREE_CONSTANT_POOL_ADDRESS_P. Increase alignment for asan protected normal decls. (output_object_block): For asan protected decls, emit asan padding after their contents. * asan.c (asan_protect_global): Don't check TREE_ASM_WRITTEN here. (asan_finish_file): Test it here instead. 2013-01-07 Nick Clifton Matthias Klose Doug Kwan H.J. Lu PR driver/55470 * collect2.c (main): Support -fuse-ld=bfd and -fuse-ld=gold. * common.opt: Add fuse-ld=bfd and fuse-ld=gold. * gcc.c (LINK_COMMAND_SPEC): Pass -fuse-ld=* to collect2. * opts.c (comman_handle_option): Ignore -fuse-ld=bfd and -fuse-ld=gold. * doc/invoke.texi: Document -fuse-ld=bfd and -fuse-ld=gold. 2013-01-07 Georg-Johann Lay PR target/54461 * doc/install.texi (Cross-Compiler-Specific Options): Document --with-avrlibc. 2013-01-07 Tejas Belagod * config/aarch64/arm_neon.h (vmovn_high_is16, vmovn_high_s32, vmovn_high_s64, vmovn_high_u16, vmovn_high_u32, vmovn_high_u64, vqmovn_high_s16, vqmovn_high_s32, vqmovn_high_s64, vqmovn_high_u16, vqmovn_high_u32, vqmovn_high_u64, vqmovun_high_s16, vqmovun_high_s32, vqmovun_high_s64): Fix source operand number and update copyright. 2013-01-07 Richard Biener PR middle-end/55890 * gimple.h (gimple_call_builtin_p): New overload. * gimple.c (validate_call): New function. (gimple_call_builtin_p): Likewise. * tree-ssa-structalias.c (find_func_aliases_for_builtin_call): Use gimple_call_builtin_p. (find_func_clobbers): Likewise. * tree-ssa-strlen.c (adjust_last_stmt): Likewise. (strlen_optimize_stmt): Likewise. 2013-01-07 James Greenhalgh * config/aarch64/arm_neon.h (vld1_dup_*): Make argument const. (vld1q_dup_*): Likewise. (vld1_*): Likewise. (vld1q_*): Likewise. (vld1_lane_*): Likewise. (vld1q_lane_*): Likewise. 2013-01-07 Richard Biener * lto-streamer.h (LTO_minor_version): Bump to 2. 2013-01-07 James Greenhalgh * config/aarch64/aarch64-protos.h (aarch64_const_double_zero_rtx_p): Rename to... (aarch64_float_const_zero_rtx_p): ...this. (aarch64_float_const_representable_p): New. (aarch64_output_simd_mov_immediate): Likewise. * config/aarch64/aarch64-simd.md (*aarch64_simd_mov): Refactor move immediate case. * config/aarch64/aarch64.c (aarch64_const_double_zero_rtx_p): Rename to... (aarch64_float_const_zero_rtx_p): ...this. (aarch64_print_operand): Allow printing of new constants. (aarch64_valid_floating_const): New. (aarch64_legitimate_constant_p): Check for valid floating-point constants. (aarch64_simd_valid_immediate): Likewise. (aarch64_vect_float_const_representable_p): New. (aarch64_float_const_representable_p): Likewise. (aarch64_simd_imm_zero_p): Also allow for floating-point 0.0. (aarch64_output_simd_mov_immediate): New. * config/aarch64/aarch64.md (*movsf_aarch64): Add new alternative. (*movdf_aarch64): Likewise. * config/aarch64/constraints.md (Ufc): New. (Y): call aarch64_float_const_zero_rtx. * config/aarch64/predicates.md (aarch64_fp_compare_operand): New. 2013-01-07 Richard Biener PR tree-optimization/55888 PR tree-optimization/55862 * tree-ssa-pre.c (phi_translate_1): Revert previous change. (valid_in_sets): Check if a NAME has a leader in AVAIL_OUT, not if it is contained therein. 2013-01-07 Georg-Johann Lay * config/avr/t-avr: Typo. 2013-01-07 Georg-Johann Lay PR55243 * config/avr/t-avr: Don't automatically rebuild $(srcdir)/config/avr/t-multilib $(srcdir)/config/avr/avr-tables.opt $(srcdir)/doc/avr-mmcu.texi (avr-mcus): New phony target to build them on request. (s-avr-mlib, s-avr-mmcu-texi): Remove. * avr/avr-mcus.def: Adjust comments. 2013-01-07 Uros Bizjak * config/i386/i386.c (DEFAULT_PCC_STRUCT_RETURN): Remove. 2013-01-06 Richard Sandiford * file-find.c, file-find.h, realmpfr.c: Add FSF as copyright holder. 2013-01-06 Richard Sandiford * config/tilepro/gen-mul-tables.cc: Put copyright on one line. 2013-01-05 David Edelsohn * config/rs6000/aix53.h (LIB_SPEC): Add -lpthreads when compiling to generate profiling. * config/rs6000/aix64.h (LIB_SPEC): Same. 2013-01-04 Andrew Pinski * config/aarch64/aarch64.c (aarch64_fixed_condition_code_regs): New function. (TARGET_FIXED_CONDITION_CODE_REGS): Define. 2013-01-04 Uros Bizjak * config/i386/i386.c (ix86_legitimize_address): Call convert_to_mode unconditionally. (ix86_expand_move): Ditto. (ix86_zero_extend_to_Pmode): Ditto. (ix86_expand_call): Ditto. (ix86_expand_special_args_builtin): Ditto. (ix86_expand_builtin): Ditto. 2013-01-04 Richard Biener PR tree-optimization/55862 * tree-ssa-pre.c (phi_translate_1): Valueize SSA names after translating them through PHI nodes. 2013-01-04 Martin Jambor PR tree-optimization/55755 * tree-sra.c (sra_modify_assign): Do not check that an access has no children when trying to avoid producing a VIEW_CONVERT_EXPR. 2013-01-04 Marek Polacek PR middle-end/55859 * opts.c (default_options_optimization): Clarify error message. 2013-01-04 Richard Biener PR middle-end/55863 * fold-const.c (split_tree): Undo -X - 1 to ~X folding for reassociation. 2013-01-03 John David Anglin PR target/53789 * config/pa/pa.md (movsi): Revert previous change. * config/pa/pa.c (pa_legitimate_constant_p): Reject all TLS symbol references. 2013-01-03 Richard Henderson * config/i386/i386.c (ix86_expand_move): Always assign to op1 after eliminating TLS symbols. 2013-01-03 Marc Glisse PR bootstrap/50167 * graphite-interchange.c (pdr_stride_in_loop): Use gmp_fprintf. * graphite-poly.c (debug_gmp_value): Likewise. 2013-01-03 Uros Bizjak PR target/55712 * config/i386/i386-c.c (ix86_target_macros_internal): Depending on selected code model, define __code_mode_small__, __code_model_medium__, __code_model_large__, __code_model_32__ or __code_model_kernel__. * config/i386/cpuid.h (__cpuid, __cpuid_count) [__i386__]: Prefix xchg temporary register with %k. Declare temporary register as early clobbered. [__x86_64__]: For medium and large code models, preserve %rbx register. 2013-01-03 Richard Biener * tree-data-ref.c (dump_conflict_function): Use less vertical spacing. (dump_subscript): Adjust. (finalize_ddr_dependent): Do not dump redundant info. (analyze_siv_subscript): Adjust. (subscript_dependence_tester): Likewise. (compute_affine_dependence): Likewise. 2013-01-03 Richard Biener Revert 2013-01-03 Richard Biener PR tree-optimization/55857 * tree-vect-stmts.c (vectorizable_load): Do not setup re-alignment for invariant loads. 2013-01-02 Richard Biener * tree-vect-stmts.c (vectorizable_load): When vectorizing an invariant load do not generate a vector load from the scalar location. 2013-01-03 Richard Biener * tree-vect-loop.c (vect_analyze_loop_form): Clarify reason for not vectorizing. * tree-vect-data-refs.c (vect_create_addr_base_for_vector_ref): Do not build INDIRECT_REFs, call get_name once only. (vect_create_data_ref_ptr): Likewise. Dump base object kind based on DR_BASE_OBJECT, not DR_BASE_ADDRESS. 2013-01-03 Richard Biener PR tree-optimization/55857 * tree-vect-stmts.c (vectorizable_load): Do not setup re-alignment for invariant loads. 2013-01-03 Richard Biener PR lto/55848 * lto-symtab.c (lto_symtab_merge_decls_1): As last resort, always prefer a built-in decl. 2013-01-03 Jakub Jelinek * gcc.c (process_command): Update copyright notice dates. * gcov.c (print_version): Likewise. * gcov-dump.c (print_version): Likewise. PR rtl-optimization/55838 * loop-iv.c (iv_number_of_iterations): Call lowpart_subreg on iv0.step, iv1.step and step. 2013-01-03 Jakub Jelinek Marc Glisse PR tree-optimization/55832 * fold-const.c (fold_binary_loc): For ABS_EXPR >= 0 and ABS_EXPR < 0 folding use constant_boolean_node instead of integer_{one,zero}_node. 2013-01-03 Jakub Jelinek PR debug/54402 * params.def (PARAM_MAX_VARTRACK_REVERSE_OP_SIZE): New param. * var-tracking.c (reverse_op): Don't add reverse ops to VALUEs that have already PARAM_VALUE (PARAM_MAX_VARTRACK_REVERSE_OP_SIZE) or longer locs list. 2013-01-02 Gerald Pfeifer * doc/contrib.texi: Note years as release manager for Mark Mitchell. 2013-01-02 Teresa Johnson * dumpfile.c (dump_loc): Print filename with location. * tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Use new location_t parameter to emit complete unroll message with new dump framework. (canonicalize_loop_induction_variables): Compute loops location and pass to try_unroll_loop_completely. * loop-unroll.c (report_unroll_peel): New function. (peel_loops_completely): Use new dump format with location for main dumpfile message, and invoke report_unroll_peel on success. (decide_unrolling_and_peeling): Ditto. (decide_peel_once_rolling): Remove old dumpfile message subsumed by report_unroll_peel. (decide_peel_completely): Ditto. (decide_unroll_constant_iterations): Ditto. (decide_unroll_runtime_iterations): Ditto. (decide_peel_simple): Ditto. (decide_unroll_stupid): Ditto. * cfgloop.c (get_loop_location): New function. * cfgloop.h (get_loop_location): Declare. 2013-01-02 Sriraman Tallam * config/i386/i386.c (fold_builtin_cpu): Remove unnecessary checks for NULL. 2013-01-02 John David Anglin PR middle-end/55198 * expr.c (expand_expr_real_1): Don't use bitfield extraction for non BLKmode objects when EXPAND_MEMORY is specified. 2013-01-02 Sriraman Tallam * config/i386/i386.c (ix86_get_function_versions_dispatcher): Fix bug in loop predicate. (fold_builtin_cpu): Do not share cpu model decls across statements. 2013-01-02 Jason Merrill PR c++/55804 * tree.c (build_array_type_1): Revert earlier change. 2013-01-02 Yufeng Zhang * config/aarch64/aarch64-cores.def: Add entries for "cortex-a53" and "cortex-a57". * config/aarch64/aarch64-tune.md: Re-generate. 2013-01-02 Richard Biener * tree-vect-stmts.c (vectorizable_load): When vectorizing an invariant load do not generate a vector load from the scalar location. 2013-01-02 Richard Biener PR bootstrap/55784 * configure.ac: Add $GMPINC to CFLAGS/CXXFLAGS. * configure: Regenerate. 2013-01-02 Richard Sandiford * builtins.c (expand_builtin_mathfn, expand_builtin_mathfn_2) (expand_builtin_mathfn_ternary, expand_builtin_mathfn_3) (expand_builtin_int_roundingfn_2): Keep the original target around for the fallback case. 2013-01-02 Richard Sandiford * tree-vrp.c (range_fits_type_p): Require the MSB of the double_int to be clear for sign changes. 2013-01-01 Jan Hubicka * ipa-inline-analysis.c: Fix formatting. 2013-01-01 Jakub Jelinek PR tree-optimization/55831 * tree-vect-loop.c (get_initial_def_for_induction): Use gsi_after_labels instead of gsi_start_bb. Copyright (C) 2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved.