/* GCC backend definitions for the Renesas RX processor. Copyright (C) 2008, 2009, 2010, 2011 Free Software Foundation, Inc. Contributed by Red Hat. This file is part of GCC. GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version. GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see . */ #define TARGET_CPU_CPP_BUILTINS() \ do \ { \ builtin_define ("__RX__"); \ builtin_assert ("cpu=RX"); \ if (rx_cpu_type == RX610) \ { \ builtin_define ("__RX610__"); \ builtin_assert ("machine=RX610"); \ } \ else \ builtin_assert ("machine=RX600"); \ \ if (TARGET_BIG_ENDIAN_DATA) \ builtin_define ("__RX_BIG_ENDIAN__"); \ else \ builtin_define ("__RX_LITTLE_ENDIAN__");\ \ if (TARGET_64BIT_DOUBLES) \ builtin_define ("__RX_64BIT_DOUBLES__");\ else \ builtin_define ("__RX_32BIT_DOUBLES__");\ \ if (ALLOW_RX_FPU_INSNS) \ builtin_define ("__RX_FPU_INSNS__"); \ \ if (TARGET_AS100_SYNTAX) \ builtin_define ("__RX_AS100_SYNTAX__"); \ else \ builtin_define ("__RX_GAS_SYNTAX__"); \ } \ while (0) #undef CC1_SPEC #define CC1_SPEC "\ %{mas100-syntax:%{gdwarf*:%e-mas100-syntax is incompatible with -gdwarf}} \ %{mcpu=rx200:%{fpu:%erx200 cpu does not have FPU hardware}}" #undef STARTFILE_SPEC #define STARTFILE_SPEC "%{pg:gcrt0.o%s}%{!pg:crt0.o%s} crtbegin.o%s" #undef ENDFILE_SPEC #define ENDFILE_SPEC "crtend.o%s crtn.o%s" #undef CPP_SPEC #define CPP_SPEC "\ %{mpid:-D_RX_PID=1} \ %{mint-register=*:-D_RX_INT_REGISTERS=%*} \ %{msmall-data-limit*:-D_RX_SMALL_DATA} \ " #undef ASM_SPEC #define ASM_SPEC "\ %{mbig-endian-data:-mbig-endian-data} \ %{m64bit-doubles:-m64bit-doubles} \ %{!m64bit-doubles:-m32bit-doubles} \ %{msmall-data-limit*:-msmall-data-limit} \ %{mrelax:-relax} \ %{mpid} \ %{mint-register=*} \ " #undef LIB_SPEC #define LIB_SPEC " \ --start-group \ -lc \ %{msim:-lsim}%{!msim:-lnosys} \ %{fprofile-arcs|fprofile-generate|coverage:-lgcov} \ --end-group \ %{!T*: %{msim:%Trx-sim.ld}%{!msim:%Trx.ld}} \ " #undef LINK_SPEC #define LINK_SPEC "%{mbig-endian-data:--oformat elf32-rx-be} %{mrelax:-relax}" #define BITS_BIG_ENDIAN 0 #define BYTES_BIG_ENDIAN TARGET_BIG_ENDIAN_DATA #define WORDS_BIG_ENDIAN TARGET_BIG_ENDIAN_DATA #define UNITS_PER_WORD 4 #define INT_TYPE_SIZE 32 #define LONG_TYPE_SIZE 32 #define LONG_LONG_TYPE_SIZE 64 #define FLOAT_TYPE_SIZE 32 #define DOUBLE_TYPE_SIZE (TARGET_64BIT_DOUBLES ? 64 : 32) #define LONG_DOUBLE_TYPE_SIZE DOUBLE_TYPE_SIZE #ifdef __RX_32BIT_DOUBLES__ #define LIBGCC2_HAS_DF_MODE 0 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 32 #else #define LIBGCC2_HAS_DF_MODE 1 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64 #endif #define DEFAULT_SIGNED_CHAR 0 #define STRICT_ALIGNMENT 1 #define FUNCTION_BOUNDARY 8 #define BIGGEST_ALIGNMENT 32 #define STACK_BOUNDARY 32 #define PARM_BOUNDARY 8 #define STACK_GROWS_DOWNWARD 1 #define FRAME_GROWS_DOWNWARD 0 #define FIRST_PARM_OFFSET(FNDECL) 0 #define MAX_REGS_PER_ADDRESS 2 #define Pmode SImode #define POINTER_SIZE 32 #undef SIZE_TYPE #define SIZE_TYPE "long unsigned int" #undef PTRDIFF_TYPE #define PTRDIFF_TYPE "long int" #undef WCHAR_TYPE #define WCHAR_TYPE "long int" #undef WCHAR_TYPE_SIZE #define WCHAR_TYPE_SIZE BITS_PER_WORD #define POINTERS_EXTEND_UNSIGNED 1 #define FUNCTION_MODE QImode #define CASE_VECTOR_MODE Pmode #define WORD_REGISTER_OPERATIONS 1 #define HAS_LONG_COND_BRANCH 0 #define HAS_LONG_UNCOND_BRANCH 0 #define MOVE_MAX 4 #define STARTING_FRAME_OFFSET 0 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 #define HAVE_PRE_DECREMENT 1 #define HAVE_POST_INCREMENT 1 #define MOVE_RATIO(SPEED) ((SPEED) ? 4 : 2) #define SLOW_BYTE_ACCESS 1 #define STORE_FLAG_VALUE 1 #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND #define SHORT_IMMEDIATES_SIGN_EXTEND 1 enum reg_class { NO_REGS, /* No registers in set. */ GR_REGS, /* Integer registers. */ ALL_REGS, /* All registers. */ LIM_REG_CLASSES /* Max value + 1. */ }; #define REG_CLASS_NAMES \ { \ "NO_REGS", \ "GR_REGS", \ "ALL_REGS" \ } #define REG_CLASS_CONTENTS \ { \ { 0x00000000 }, /* No registers, */ \ { 0x0000ffff }, /* Integer registers. */ \ { 0x0000ffff } /* All registers. */ \ } #define N_REG_CLASSES (int) LIM_REG_CLASSES #define CLASS_MAX_NREGS(CLASS, MODE) ((GET_MODE_SIZE (MODE) \ + UNITS_PER_WORD - 1) \ / UNITS_PER_WORD) #define GENERAL_REGS GR_REGS #define BASE_REG_CLASS GR_REGS #define INDEX_REG_CLASS GR_REGS #define FIRST_PSEUDO_REGISTER 17 #define REGNO_REG_CLASS(REGNO) ((REGNO) < FIRST_PSEUDO_REGISTER \ ? GR_REGS : NO_REGS) #define STACK_POINTER_REGNUM 0 #define FUNC_RETURN_REGNUM 1 #define FRAME_POINTER_REGNUM 6 #define ARG_POINTER_REGNUM 7 #define STATIC_CHAIN_REGNUM 8 #define TRAMPOLINE_TEMP_REGNUM 9 #define STRUCT_VAL_REGNUM 15 #define CC_REGNUM 16 /* This is the register which will probably be used to hold the address of the start of the small data area, if -msmall-data-limit is being used, or the address of the constant data area if -mpid is being used. If both features are in use then two consecutive registers will be used. Note - these registers must not be call_used because otherwise library functions that are compiled without -msmall-data-limit/-mpid support might clobber them. Note that the actual values used depends on other options; use rx_gp_base_regnum() and rx_pid_base_regnum() instead. */ #define GP_BASE_REGNUM 13 #define ELIMINABLE_REGS \ {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM }, \ { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM }, \ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM }} #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ (OFFSET) = rx_initial_elimination_offset ((FROM), (TO)) #define FUNCTION_ARG_REGNO_P(N) (((N) >= 1) && ((N) <= 4)) #define FUNCTION_VALUE_REGNO_P(N) ((N) == FUNC_RETURN_REGNUM) #define DEFAULT_PCC_STRUCT_RETURN 0 #define FIXED_REGISTERS \ { \ 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1 \ } #define CALL_USED_REGISTERS \ { \ 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1 \ } #define LIBCALL_VALUE(MODE) \ gen_rtx_REG (((GET_MODE_CLASS (MODE) != MODE_INT \ || COMPLEX_MODE_P (MODE) \ || GET_MODE_SIZE (MODE) >= 4) \ ? (MODE) \ : SImode), \ FUNC_RETURN_REGNUM) /* Order of allocation of registers. */ #define REG_ALLOC_ORDER \ { 7, 10, 11, 12, 13, 14, 4, 3, 2, 1, 9, 8, 6, 5, 15 \ } #define REGNO_IN_RANGE(REGNO, MIN, MAX) \ (IN_RANGE ((REGNO), (MIN), (MAX)) \ || (reg_renumber != NULL \ && reg_renumber[(REGNO)] >= (MIN) \ && reg_renumber[(REGNO)] <= (MAX))) #ifdef REG_OK_STRICT #define REGNO_OK_FOR_BASE_P(regno) REGNO_IN_RANGE (regno, 0, 15) #else #define REGNO_OK_FOR_BASE_P(regno) 1 #endif #define REGNO_OK_FOR_INDEX_P(regno) REGNO_OK_FOR_BASE_P (regno) #define RTX_OK_FOR_BASE(X, STRICT) \ ((STRICT) ? \ ( (REG_P (X) \ && REGNO_IN_RANGE (REGNO (X), 0, 15)) \ || (GET_CODE (X) == SUBREG \ && REG_P (SUBREG_REG (X)) \ && REGNO_IN_RANGE (REGNO (SUBREG_REG (X)), 0, 15))) \ : \ ( (REG_P (X) \ || (GET_CODE (X) == SUBREG \ && REG_P (SUBREG_REG (X)))))) #define RETURN_ADDR_RTX(COUNT, FRAMEADDR) \ ((COUNT) == 0 \ ? gen_rtx_MEM (Pmode, gen_rtx_PLUS (Pmode, arg_pointer_rtx, GEN_INT (-4))) \ : NULL_RTX) #define INCOMING_RETURN_ADDR_RTX gen_rtx_MEM (Pmode, stack_pointer_rtx) #define ACCUMULATE_OUTGOING_ARGS 1 typedef unsigned int CUMULATIVE_ARGS; #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \ (CUM) = 0 #define TRAMPOLINE_SIZE (! TARGET_BIG_ENDIAN_DATA ? 14 : 20) #define TRAMPOLINE_ALIGNMENT 32 #define NO_PROFILE_COUNTERS 1 #define PROFILE_BEFORE_PROLOGUE 1 #define FUNCTION_PROFILER(FILE, LABELNO) \ fprintf (FILE, "\tbsr\t__mcount\n"); #define HARD_REGNO_NREGS(REGNO, MODE) CLASS_MAX_NREGS (0, MODE) #define HARD_REGNO_MODE_OK(REGNO, MODE) \ REGNO_REG_CLASS (REGNO) == GR_REGS #define MODES_TIEABLE_P(MODE1, MODE2) \ ( ( GET_MODE_CLASS (MODE1) == MODE_FLOAT \ || GET_MODE_CLASS (MODE1) == MODE_COMPLEX_FLOAT) \ == ( GET_MODE_CLASS (MODE2) == MODE_FLOAT \ || GET_MODE_CLASS (MODE2) == MODE_COMPLEX_FLOAT)) #define REGISTER_NAMES \ { \ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", "cc" \ } #define ADDITIONAL_REGISTER_NAMES \ { \ { "sp", STACK_POINTER_REGNUM } \ , { "fp", FRAME_POINTER_REGNUM } \ , { "arg", ARG_POINTER_REGNUM } \ , { "chain", STATIC_CHAIN_REGNUM } \ } #define DATA_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION D,DATA" \ : "\t.section D,\"aw\",@progbits\n\t.p2align 2") #define SDATA_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION D_2,DATA,ALIGN=2" \ : "\t.section D_2,\"aw\",@progbits\n\t.p2align 1") #undef READONLY_DATA_SECTION_ASM_OP #define READONLY_DATA_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION C,ROMDATA,ALIGN=4" \ : "\t.section C,\"a\",@progbits\n\t.p2align 2") #define BSS_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION B,DATA,ALIGN=4" \ : "\t.section B,\"w\",@nobits\n\t.p2align 2") #define SBSS_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION B_2,DATA,ALIGN=2" \ : "\t.section B_2,\"w\",@nobits\n\t.p2align 1") /* The following definitions are conditional depending upon whether the compiler is being built or crtstuff.c is being compiled by the built compiler. */ #if defined CRT_BEGIN || defined CRT_END # ifdef __RX_AS100_SYNTAX # define TEXT_SECTION_ASM_OP "\t.SECTION P,CODE" # define CTORS_SECTION_ASM_OP "\t.SECTION init_array,CODE" # define DTORS_SECTION_ASM_OP "\t.SECTION fini_array,CODE" # define INIT_ARRAY_SECTION_ASM_OP "\t.SECTION init_array,CODE" # define FINI_ARRAY_SECTION_ASM_OP "\t.SECTION fini_array,CODE" # else # define TEXT_SECTION_ASM_OP "\t.section P,\"ax\"" # define CTORS_SECTION_ASM_OP \ "\t.section\t.init_array,\"aw\",@init_array" # define DTORS_SECTION_ASM_OP \ "\t.section\t.fini_array,\"aw\",@fini_array" # define INIT_ARRAY_SECTION_ASM_OP \ "\t.section\t.init_array,\"aw\",@init_array" # define FINI_ARRAY_SECTION_ASM_OP \ "\t.section\t.fini_array,\"aw\",@fini_array" # endif #else # define TEXT_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION P,CODE" : "\t.section P,\"ax\"") # define CTORS_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION init_array,CODE" \ : "\t.section\t.init_array,\"aw\",@init_array") # define DTORS_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION fini_array,CODE" \ : "\t.section\t.fini_array,\"aw\",@fini_array") # define INIT_ARRAY_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION init_array,CODE" \ : "\t.section\t.init_array,\"aw\",@init_array") # define FINI_ARRAY_SECTION_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.SECTION fini_array,CODE" \ : "\t.section\t.fini_array,\"aw\",@fini_array") #endif #define GLOBAL_ASM_OP \ (TARGET_AS100_SYNTAX ? "\t.GLB\t" : "\t.global\t") #define ASM_COMMENT_START " ;" #define ASM_APP_ON "" #define ASM_APP_OFF "" #define LOCAL_LABEL_PREFIX "L" #undef USER_LABEL_PREFIX #define USER_LABEL_PREFIX "_" /* Compute the alignment needed for label X in various situations. If the user has specified an alignment then honour that, otherwise use rx_align_for_label. */ #define JUMP_ALIGN(x) (align_jumps ? align_jumps : rx_align_for_label (x, 0)) #define LABEL_ALIGN(x) (align_labels ? align_labels : rx_align_for_label (x, 3)) #define LOOP_ALIGN(x) (align_loops ? align_loops : rx_align_for_label (x, 2)) #define LABEL_ALIGN_AFTER_BARRIER(x) rx_align_for_label (x, 0) #define ASM_OUTPUT_MAX_SKIP_ALIGN(STREAM, LOG, MAX_SKIP) \ do \ { \ if ((LOG) == 0 || (MAX_SKIP) == 0) \ break; \ if (TARGET_AS100_SYNTAX) \ { \ if ((LOG) >= 2) \ fprintf (STREAM, "\t.ALIGN 4\t; %d alignment actually requested\n", 1 << (LOG)); \ else \ fprintf (STREAM, "\t.ALIGN 2\n"); \ } \ else \ fprintf (STREAM, "\t.balign %d,3,%d\n", 1 << (LOG), (MAX_SKIP)); \ } \ while (0) #define ASM_OUTPUT_ALIGN(STREAM, LOG) \ do \ { \ if ((LOG) == 0) \ break; \ if (TARGET_AS100_SYNTAX) \ { \ if ((LOG) >= 2) \ fprintf (STREAM, "\t.ALIGN 4\t; %d alignment actually requested\n", 1 << (LOG)); \ else \ fprintf (STREAM, "\t.ALIGN 2\n"); \ } \ else \ fprintf (STREAM, "\t.balign %d\n", 1 << (LOG)); \ } \ while (0) #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ fprintf (FILE, TARGET_AS100_SYNTAX ? "\t.LWORD L%d\n" : "\t.long .L%d\n", \ VALUE) /* This is how to output an element of a case-vector that is relative. Note: The local label referenced by the "1b" below is emitted by the tablejump insn. */ #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ fprintf (FILE, TARGET_AS100_SYNTAX \ ? "\t.LWORD L%d - ?-\n" : "\t.long .L%d - 1b\n", VALUE) #define CASE_VECTOR_PC_RELATIVE (TARGET_PID) #define ASM_OUTPUT_SIZE_DIRECTIVE(STREAM, NAME, SIZE) \ do \ { \ HOST_WIDE_INT size_ = (SIZE); \ \ /* The as100 assembler does not have an equivalent of the SVR4 \ .size pseudo-op. */ \ if (TARGET_AS100_SYNTAX) \ break; \ \ fputs (SIZE_ASM_OP, STREAM); \ assemble_name (STREAM, NAME); \ fprintf (STREAM, ", " HOST_WIDE_INT_PRINT_DEC "\n", size_); \ } \ while (0) #define ASM_OUTPUT_MEASURED_SIZE(STREAM, NAME) \ do \ { \ /* The as100 assembler does not have an equivalent of the SVR4 \ .size pseudo-op. */ \ if (TARGET_AS100_SYNTAX) \ break; \ fputs (SIZE_ASM_OP, STREAM); \ assemble_name (STREAM, NAME); \ fputs (", .-", STREAM); \ assemble_name (STREAM, NAME); \ putc ('\n', STREAM); \ } \ while (0) #define ASM_OUTPUT_TYPE_DIRECTIVE(STREAM, NAME, TYPE) \ do \ { \ /* The as100 assembler does not have an equivalent of the SVR4 \ .size pseudo-op. */ \ if (TARGET_AS100_SYNTAX) \ break; \ fputs (TYPE_ASM_OP, STREAM); \ assemble_name (STREAM, NAME); \ fputs (", ", STREAM); \ fprintf (STREAM, TYPE_OPERAND_FMT, TYPE); \ putc ('\n', STREAM); \ } \ while (0) #undef ASM_GENERATE_INTERNAL_LABEL #define ASM_GENERATE_INTERNAL_LABEL(LABEL, PREFIX, NUM) \ do \ { \ sprintf (LABEL, TARGET_AS100_SYNTAX ? "*%s%u" : "*.%s%u", \ PREFIX, (unsigned) (NUM)); \ } \ while (0) #undef ASM_OUTPUT_EXTERNAL #define ASM_OUTPUT_EXTERNAL(FILE, DECL, NAME) \ do \ { \ if (TARGET_AS100_SYNTAX) \ targetm.asm_out.globalize_label (FILE, NAME); \ default_elf_asm_output_external (FILE, DECL, NAME); \ } \ while (0) #undef ASM_OUTPUT_ALIGNED_COMMON #define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \ do \ { \ if (TARGET_AS100_SYNTAX) \ { \ fprintf ((FILE), "\t.GLB\t"); \ assemble_name ((FILE), (NAME)); \ fprintf ((FILE), "\n"); \ assemble_name ((FILE), (NAME)); \ switch ((ALIGN) / BITS_PER_UNIT) \ { \ case 4: \ fprintf ((FILE), ":\t.BLKL\t"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ (SIZE) / 4); \ break; \ case 2: \ fprintf ((FILE), ":\t.BLKW\t"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ (SIZE) / 2); \ break; \ default: \ fprintf ((FILE), ":\t.BLKB\t"HOST_WIDE_INT_PRINT_UNSIGNED"\n",\ (SIZE)); \ break; \ } \ } \ else \ { \ fprintf ((FILE), "%s", COMMON_ASM_OP); \ assemble_name ((FILE), (NAME)); \ fprintf ((FILE), ","HOST_WIDE_INT_PRINT_UNSIGNED",%u\n", \ (SIZE), (ALIGN) / BITS_PER_UNIT); \ } \ } \ while (0) #undef SKIP_ASM_OP #define SKIP_ASM_OP (TARGET_AS100_SYNTAX ? "\t.BLKB\t" : "\t.zero\t") #undef ASM_OUTPUT_LIMITED_STRING #define ASM_OUTPUT_LIMITED_STRING(FILE, STR) \ do \ { \ const unsigned char *_limited_str = \ (const unsigned char *) (STR); \ unsigned ch; \ \ fprintf ((FILE), TARGET_AS100_SYNTAX \ ? "\t.BYTE\t\"" : "\t.string\t\""); \ \ for (; (ch = *_limited_str); _limited_str++) \ { \ int escape; \ \ switch (escape = ESCAPES[ch]) \ { \ case 0: \ putc (ch, (FILE)); \ break; \ case 1: \ fprintf ((FILE), "\\%03o", ch); \ break; \ default: \ putc ('\\', (FILE)); \ putc (escape, (FILE)); \ break; \ } \ } \ \ fprintf ((FILE), TARGET_AS100_SYNTAX ? "\"\n\t.BYTE\t0\n" : "\"\n");\ } \ while (0) #undef IDENT_ASM_OP #define IDENT_ASM_OP (TARGET_AS100_SYNTAX \ ? "\t.END\t; Built by: ": "\t.ident\t") /* For PIC put jump tables into the text section so that the offsets that they contain are always computed between two same-section symbols. */ #define JUMP_TABLES_IN_TEXT_SECTION (TARGET_PID || flag_pic) /* This is a version of REG_P that also returns TRUE for SUBREGs. */ #define RX_REG_P(rtl) (REG_P (rtl) || GET_CODE (rtl) == SUBREG) /* Like REG_P except that this macro is true for SET expressions. */ #define SET_P(rtl) (GET_CODE (rtl) == SET) /* The AS100 assembler does not support .leb128 and .uleb128, but the compiler-build-time configure tests will have enabled their use because GAS supports them. So default to generating STABS debug information instead of DWARF2 when generating AS100 compatible output. */ #undef PREFERRED_DEBUGGING_TYPE #define PREFERRED_DEBUGGING_TYPE (TARGET_AS100_SYNTAX \ ? DBX_DEBUG : DWARF2_DEBUG) #define INCOMING_FRAME_SP_OFFSET 4 #define ARG_POINTER_CFA_OFFSET(FNDECL) 4 #define FRAME_POINTER_CFA_OFFSET(FNDECL) 4 #define TARGET_USE_FPU (! TARGET_NO_USE_FPU) /* This macro is used to decide when RX FPU instructions can be used. */ #define ALLOW_RX_FPU_INSNS (TARGET_USE_FPU) #define BRANCH_COST(SPEED,PREDICT) 1 #define REGISTER_MOVE_COST(MODE,FROM,TO) 2 #define SELECT_CC_MODE(OP,X,Y) rx_select_cc_mode(OP, X, Y) #define ADJUST_INSN_LENGTH(INSN,LENGTH) \ do \ { \ (LENGTH) = rx_adjust_insn_length ((INSN), (LENGTH)); \ } \ while (0)