/* Expands front end tree to back end RTL for GCC
Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997,
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
. */
/* This file handles the generation of rtl code from tree structure
above the level of expressions, using subroutines in exp*.c and emit-rtl.c.
The functions whose names start with `expand_' are called by the
expander to generate RTL instructions for various kinds of constructs. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "rtl.h"
#include "hard-reg-set.h"
#include "tree.h"
#include "tm_p.h"
#include "flags.h"
#include "except.h"
#include "function.h"
#include "insn-config.h"
#include "expr.h"
#include "libfuncs.h"
#include "recog.h"
#include "machmode.h"
#include "toplev.h"
#include "output.h"
#include "ggc.h"
#include "langhooks.h"
#include "predict.h"
#include "optabs.h"
#include "target.h"
#include "regs.h"
#include "alloc-pool.h"
#include "coverage.h"
/* Functions and data structures for expanding case statements. */
/* Case label structure, used to hold info on labels within case
statements. We handle "range" labels; for a single-value label
as in C, the high and low limits are the same.
We start with a vector of case nodes sorted in ascending order, and
the default label as the last element in the vector. Before expanding
to RTL, we transform this vector into a list linked via the RIGHT
fields in the case_node struct. Nodes with higher case values are
later in the list.
Switch statements can be output in three forms. A branch table is
used if there are more than a few labels and the labels are dense
within the range between the smallest and largest case value. If a
branch table is used, no further manipulations are done with the case
node chain.
The alternative to the use of a branch table is to generate a series
of compare and jump insns. When that is done, we use the LEFT, RIGHT,
and PARENT fields to hold a binary tree. Initially the tree is
totally unbalanced, with everything on the right. We balance the tree
with nodes on the left having lower case values than the parent
and nodes on the right having higher values. We then output the tree
in order.
For very small, suitable switch statements, we can generate a series
of simple bit test and branches instead. */
struct case_node
{
struct case_node *left; /* Left son in binary tree */
struct case_node *right; /* Right son in binary tree; also node chain */
struct case_node *parent; /* Parent of node in binary tree */
tree low; /* Lowest index value for this label */
tree high; /* Highest index value for this label */
tree code_label; /* Label to jump to when node matches */
};
typedef struct case_node case_node;
typedef struct case_node *case_node_ptr;
/* These are used by estimate_case_costs and balance_case_nodes. */
/* This must be a signed type, and non-ANSI compilers lack signed char. */
static short cost_table_[129];
static int use_cost_table;
static int cost_table_initialized;
/* Special care is needed because we allow -1, but TREE_INT_CST_LOW
is unsigned. */
#define COST_TABLE(I) cost_table_[(unsigned HOST_WIDE_INT) ((I) + 1)]
static int n_occurrences (int, const char *);
static bool tree_conflicts_with_clobbers_p (tree, HARD_REG_SET *);
static void expand_nl_goto_receiver (void);
static bool check_operand_nalternatives (tree, tree);
static bool check_unique_operand_names (tree, tree);
static char *resolve_operand_name_1 (char *, tree, tree);
static void expand_null_return_1 (void);
static void expand_value_return (rtx);
static int estimate_case_costs (case_node_ptr);
static bool lshift_cheap_p (void);
static int case_bit_test_cmp (const void *, const void *);
static void emit_case_bit_tests (tree, tree, tree, tree, case_node_ptr, rtx);
static void balance_case_nodes (case_node_ptr *, case_node_ptr);
static int node_has_low_bound (case_node_ptr, tree);
static int node_has_high_bound (case_node_ptr, tree);
static int node_is_bounded (case_node_ptr, tree);
static void emit_case_nodes (rtx, case_node_ptr, rtx, tree);
static struct case_node *add_case_node (struct case_node *, tree,
tree, tree, tree, alloc_pool);
/* Return the rtx-label that corresponds to a LABEL_DECL,
creating it if necessary. */
rtx
label_rtx (tree label)
{
gcc_assert (TREE_CODE (label) == LABEL_DECL);
if (!DECL_RTL_SET_P (label))
{
rtx r = gen_label_rtx ();
SET_DECL_RTL (label, r);
if (FORCED_LABEL (label) || DECL_NONLOCAL (label))
LABEL_PRESERVE_P (r) = 1;
}
return DECL_RTL (label);
}
/* As above, but also put it on the forced-reference list of the
function that contains it. */
rtx
force_label_rtx (tree label)
{
rtx ref = label_rtx (label);
tree function = decl_function_context (label);
gcc_assert (function);
forced_labels = gen_rtx_EXPR_LIST (VOIDmode, ref, forced_labels);
return ref;
}
/* Add an unconditional jump to LABEL as the next sequential instruction. */
void
emit_jump (rtx label)
{
do_pending_stack_adjust ();
emit_jump_insn (gen_jump (label));
emit_barrier ();
}
/* Emit code to jump to the address
specified by the pointer expression EXP. */
void
expand_computed_goto (tree exp)
{
rtx x = expand_normal (exp);
x = convert_memory_address (Pmode, x);
do_pending_stack_adjust ();
emit_indirect_jump (x);
}
/* Handle goto statements and the labels that they can go to. */
/* Specify the location in the RTL code of a label LABEL,
which is a LABEL_DECL tree node.
This is used for the kind of label that the user can jump to with a
goto statement, and for alternatives of a switch or case statement.
RTL labels generated for loops and conditionals don't go through here;
they are generated directly at the RTL level, by other functions below.
Note that this has nothing to do with defining label *names*.
Languages vary in how they do that and what that even means. */
void
expand_label (tree label)
{
rtx label_r = label_rtx (label);
do_pending_stack_adjust ();
emit_label (label_r);
if (DECL_NAME (label))
LABEL_NAME (DECL_RTL (label)) = IDENTIFIER_POINTER (DECL_NAME (label));
if (DECL_NONLOCAL (label))
{
expand_nl_goto_receiver ();
nonlocal_goto_handler_labels
= gen_rtx_EXPR_LIST (VOIDmode, label_r,
nonlocal_goto_handler_labels);
}
if (FORCED_LABEL (label))
forced_labels = gen_rtx_EXPR_LIST (VOIDmode, label_r, forced_labels);
if (DECL_NONLOCAL (label) || FORCED_LABEL (label))
maybe_set_first_label_num (label_r);
}
/* Generate RTL code for a `goto' statement with target label LABEL.
LABEL should be a LABEL_DECL tree node that was or will later be
defined with `expand_label'. */
void
expand_goto (tree label)
{
#ifdef ENABLE_CHECKING
/* Check for a nonlocal goto to a containing function. Should have
gotten translated to __builtin_nonlocal_goto. */
tree context = decl_function_context (label);
gcc_assert (!context || context == current_function_decl);
#endif
emit_jump (label_rtx (label));
}
/* Return the number of times character C occurs in string S. */
static int
n_occurrences (int c, const char *s)
{
int n = 0;
while (*s)
n += (*s++ == c);
return n;
}
/* Generate RTL for an asm statement (explicit assembler code).
STRING is a STRING_CST node containing the assembler code text,
or an ADDR_EXPR containing a STRING_CST. VOL nonzero means the
insn is volatile; don't optimize it. */
static void
expand_asm_loc (tree string, int vol, location_t locus)
{
rtx body;
if (TREE_CODE (string) == ADDR_EXPR)
string = TREE_OPERAND (string, 0);
body = gen_rtx_ASM_INPUT_loc (VOIDmode,
ggc_strdup (TREE_STRING_POINTER (string)),
locus);
MEM_VOLATILE_P (body) = vol;
emit_insn (body);
}
/* Parse the output constraint pointed to by *CONSTRAINT_P. It is the
OPERAND_NUMth output operand, indexed from zero. There are NINPUTS
inputs and NOUTPUTS outputs to this extended-asm. Upon return,
*ALLOWS_MEM will be TRUE iff the constraint allows the use of a
memory operand. Similarly, *ALLOWS_REG will be TRUE iff the
constraint allows the use of a register operand. And, *IS_INOUT
will be true if the operand is read-write, i.e., if it is used as
an input as well as an output. If *CONSTRAINT_P is not in
canonical form, it will be made canonical. (Note that `+' will be
replaced with `=' as part of this process.)
Returns TRUE if all went well; FALSE if an error occurred. */
bool
parse_output_constraint (const char **constraint_p, int operand_num,
int ninputs, int noutputs, bool *allows_mem,
bool *allows_reg, bool *is_inout)
{
const char *constraint = *constraint_p;
const char *p;
/* Assume the constraint doesn't allow the use of either a register
or memory. */
*allows_mem = false;
*allows_reg = false;
/* Allow the `=' or `+' to not be at the beginning of the string,
since it wasn't explicitly documented that way, and there is a
large body of code that puts it last. Swap the character to
the front, so as not to uglify any place else. */
p = strchr (constraint, '=');
if (!p)
p = strchr (constraint, '+');
/* If the string doesn't contain an `=', issue an error
message. */
if (!p)
{
error ("output operand constraint lacks %<=%>");
return false;
}
/* If the constraint begins with `+', then the operand is both read
from and written to. */
*is_inout = (*p == '+');
/* Canonicalize the output constraint so that it begins with `='. */
if (p != constraint || *is_inout)
{
char *buf;
size_t c_len = strlen (constraint);
if (p != constraint)
warning (0, "output constraint %qc for operand %d "
"is not at the beginning",
*p, operand_num);
/* Make a copy of the constraint. */
buf = XALLOCAVEC (char, c_len + 1);
strcpy (buf, constraint);
/* Swap the first character and the `=' or `+'. */
buf[p - constraint] = buf[0];
/* Make sure the first character is an `='. (Until we do this,
it might be a `+'.) */
buf[0] = '=';
/* Replace the constraint with the canonicalized string. */
*constraint_p = ggc_alloc_string (buf, c_len);
constraint = *constraint_p;
}
/* Loop through the constraint string. */
for (p = constraint + 1; *p; p += CONSTRAINT_LEN (*p, p))
switch (*p)
{
case '+':
case '=':
error ("operand constraint contains incorrectly positioned "
"%<+%> or %<=%>");
return false;
case '%':
if (operand_num + 1 == ninputs + noutputs)
{
error ("%<%%%> constraint used with last operand");
return false;
}
break;
case 'V': case TARGET_MEM_CONSTRAINT: case 'o':
*allows_mem = true;
break;
case '?': case '!': case '*': case '&': case '#':
case 'E': case 'F': case 'G': case 'H':
case 's': case 'i': case 'n':
case 'I': case 'J': case 'K': case 'L': case 'M':
case 'N': case 'O': case 'P': case ',':
break;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
case '[':
error ("matching constraint not valid in output operand");
return false;
case '<': case '>':
/* ??? Before flow, auto inc/dec insns are not supposed to exist,
excepting those that expand_call created. So match memory
and hope. */
*allows_mem = true;
break;
case 'g': case 'X':
*allows_reg = true;
*allows_mem = true;
break;
case 'p': case 'r':
*allows_reg = true;
break;
default:
if (!ISALPHA (*p))
break;
if (REG_CLASS_FROM_CONSTRAINT (*p, p) != NO_REGS)
*allows_reg = true;
#ifdef EXTRA_CONSTRAINT_STR
else if (EXTRA_ADDRESS_CONSTRAINT (*p, p))
*allows_reg = true;
else if (EXTRA_MEMORY_CONSTRAINT (*p, p))
*allows_mem = true;
else
{
/* Otherwise we can't assume anything about the nature of
the constraint except that it isn't purely registers.
Treat it like "g" and hope for the best. */
*allows_reg = true;
*allows_mem = true;
}
#endif
break;
}
return true;
}
/* Similar, but for input constraints. */
bool
parse_input_constraint (const char **constraint_p, int input_num,
int ninputs, int noutputs, int ninout,
const char * const * constraints,
bool *allows_mem, bool *allows_reg)
{
const char *constraint = *constraint_p;
const char *orig_constraint = constraint;
size_t c_len = strlen (constraint);
size_t j;
bool saw_match = false;
/* Assume the constraint doesn't allow the use of either
a register or memory. */
*allows_mem = false;
*allows_reg = false;
/* Make sure constraint has neither `=', `+', nor '&'. */
for (j = 0; j < c_len; j += CONSTRAINT_LEN (constraint[j], constraint+j))
switch (constraint[j])
{
case '+': case '=': case '&':
if (constraint == orig_constraint)
{
error ("input operand constraint contains %qc", constraint[j]);
return false;
}
break;
case '%':
if (constraint == orig_constraint
&& input_num + 1 == ninputs - ninout)
{
error ("%<%%%> constraint used with last operand");
return false;
}
break;
case 'V': case TARGET_MEM_CONSTRAINT: case 'o':
*allows_mem = true;
break;
case '<': case '>':
case '?': case '!': case '*': case '#':
case 'E': case 'F': case 'G': case 'H':
case 's': case 'i': case 'n':
case 'I': case 'J': case 'K': case 'L': case 'M':
case 'N': case 'O': case 'P': case ',':
break;
/* Whether or not a numeric constraint allows a register is
decided by the matching constraint, and so there is no need
to do anything special with them. We must handle them in
the default case, so that we don't unnecessarily force
operands to memory. */
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
{
char *end;
unsigned long match;
saw_match = true;
match = strtoul (constraint + j, &end, 10);
if (match >= (unsigned long) noutputs)
{
error ("matching constraint references invalid operand number");
return false;
}
/* Try and find the real constraint for this dup. Only do this
if the matching constraint is the only alternative. */
if (*end == '\0'
&& (j == 0 || (j == 1 && constraint[0] == '%')))
{
constraint = constraints[match];
*constraint_p = constraint;
c_len = strlen (constraint);
j = 0;
/* ??? At the end of the loop, we will skip the first part of
the matched constraint. This assumes not only that the
other constraint is an output constraint, but also that
the '=' or '+' come first. */
break;
}
else
j = end - constraint;
/* Anticipate increment at end of loop. */
j--;
}
/* Fall through. */
case 'p': case 'r':
*allows_reg = true;
break;
case 'g': case 'X':
*allows_reg = true;
*allows_mem = true;
break;
default:
if (! ISALPHA (constraint[j]))
{
error ("invalid punctuation %qc in constraint", constraint[j]);
return false;
}
if (REG_CLASS_FROM_CONSTRAINT (constraint[j], constraint + j)
!= NO_REGS)
*allows_reg = true;
#ifdef EXTRA_CONSTRAINT_STR
else if (EXTRA_ADDRESS_CONSTRAINT (constraint[j], constraint + j))
*allows_reg = true;
else if (EXTRA_MEMORY_CONSTRAINT (constraint[j], constraint + j))
*allows_mem = true;
else
{
/* Otherwise we can't assume anything about the nature of
the constraint except that it isn't purely registers.
Treat it like "g" and hope for the best. */
*allows_reg = true;
*allows_mem = true;
}
#endif
break;
}
if (saw_match && !*allows_reg)
warning (0, "matching constraint does not allow a register");
return true;
}
/* Return DECL iff there's an overlap between *REGS and DECL, where DECL
can be an asm-declared register. Called via walk_tree. */
static tree
decl_overlaps_hard_reg_set_p (tree *declp, int *walk_subtrees ATTRIBUTE_UNUSED,
void *data)
{
tree decl = *declp;
const HARD_REG_SET *const regs = (const HARD_REG_SET *) data;
if (TREE_CODE (decl) == VAR_DECL)
{
if (DECL_HARD_REGISTER (decl)
&& REG_P (DECL_RTL (decl))
&& REGNO (DECL_RTL (decl)) < FIRST_PSEUDO_REGISTER)
{
rtx reg = DECL_RTL (decl);
if (overlaps_hard_reg_set_p (*regs, GET_MODE (reg), REGNO (reg)))
return decl;
}
walk_subtrees = 0;
}
else if (TYPE_P (decl) || TREE_CODE (decl) == PARM_DECL)
walk_subtrees = 0;
return NULL_TREE;
}
/* If there is an overlap between *REGS and DECL, return the first overlap
found. */
tree
tree_overlaps_hard_reg_set (tree decl, HARD_REG_SET *regs)
{
return walk_tree (&decl, decl_overlaps_hard_reg_set_p, regs, NULL);
}
/* Check for overlap between registers marked in CLOBBERED_REGS and
anything inappropriate in T. Emit error and return the register
variable definition for error, NULL_TREE for ok. */
static bool
tree_conflicts_with_clobbers_p (tree t, HARD_REG_SET *clobbered_regs)
{
/* Conflicts between asm-declared register variables and the clobber
list are not allowed. */
tree overlap = tree_overlaps_hard_reg_set (t, clobbered_regs);
if (overlap)
{
error ("asm-specifier for variable %qs conflicts with asm clobber list",
IDENTIFIER_POINTER (DECL_NAME (overlap)));
/* Reset registerness to stop multiple errors emitted for a single
variable. */
DECL_REGISTER (overlap) = 0;
return true;
}
return false;
}
/* Generate RTL for an asm statement with arguments.
STRING is the instruction template.
OUTPUTS is a list of output arguments (lvalues); INPUTS a list of inputs.
Each output or input has an expression in the TREE_VALUE and
a tree list in TREE_PURPOSE which in turn contains a constraint
name in TREE_VALUE (or NULL_TREE) and a constraint string
in TREE_PURPOSE.
CLOBBERS is a list of STRING_CST nodes each naming a hard register
that is clobbered by this insn.
Not all kinds of lvalue that may appear in OUTPUTS can be stored directly.
Some elements of OUTPUTS may be replaced with trees representing temporary
values. The caller should copy those temporary values to the originally
specified lvalues.
VOL nonzero means the insn is volatile; don't optimize it. */
static void
expand_asm_operands (tree string, tree outputs, tree inputs,
tree clobbers, int vol, location_t locus)
{
rtvec argvec, constraintvec;
rtx body;
int ninputs = list_length (inputs);
int noutputs = list_length (outputs);
int ninout;
int nclobbers;
HARD_REG_SET clobbered_regs;
int clobber_conflict_found = 0;
tree tail;
tree t;
int i;
/* Vector of RTX's of evaluated output operands. */
rtx *output_rtx = XALLOCAVEC (rtx, noutputs);
int *inout_opnum = XALLOCAVEC (int, noutputs);
rtx *real_output_rtx = XALLOCAVEC (rtx, noutputs);
enum machine_mode *inout_mode = XALLOCAVEC (enum machine_mode, noutputs);
const char **constraints = XALLOCAVEC (const char *, noutputs + ninputs);
int old_generating_concat_p = generating_concat_p;
/* An ASM with no outputs needs to be treated as volatile, for now. */
if (noutputs == 0)
vol = 1;
if (! check_operand_nalternatives (outputs, inputs))
return;
string = resolve_asm_operand_names (string, outputs, inputs);
/* Collect constraints. */
i = 0;
for (t = outputs; t ; t = TREE_CHAIN (t), i++)
constraints[i] = TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (t)));
for (t = inputs; t ; t = TREE_CHAIN (t), i++)
constraints[i] = TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (t)));
/* Sometimes we wish to automatically clobber registers across an asm.
Case in point is when the i386 backend moved from cc0 to a hard reg --
maintaining source-level compatibility means automatically clobbering
the flags register. */
clobbers = targetm.md_asm_clobbers (outputs, inputs, clobbers);
/* Count the number of meaningful clobbered registers, ignoring what
we would ignore later. */
nclobbers = 0;
CLEAR_HARD_REG_SET (clobbered_regs);
for (tail = clobbers; tail; tail = TREE_CHAIN (tail))
{
const char *regname;
if (TREE_VALUE (tail) == error_mark_node)
return;
regname = TREE_STRING_POINTER (TREE_VALUE (tail));
i = decode_reg_name (regname);
if (i >= 0 || i == -4)
++nclobbers;
else if (i == -2)
error ("unknown register name %qs in %", regname);
/* Mark clobbered registers. */
if (i >= 0)
{
/* Clobbering the PIC register is an error. */
if (i == (int) PIC_OFFSET_TABLE_REGNUM)
{
error ("PIC register %qs clobbered in %", regname);
return;
}
SET_HARD_REG_BIT (clobbered_regs, i);
}
}
/* First pass over inputs and outputs checks validity and sets
mark_addressable if needed. */
ninout = 0;
for (i = 0, tail = outputs; tail; tail = TREE_CHAIN (tail), i++)
{
tree val = TREE_VALUE (tail);
tree type = TREE_TYPE (val);
const char *constraint;
bool is_inout;
bool allows_reg;
bool allows_mem;
/* If there's an erroneous arg, emit no insn. */
if (type == error_mark_node)
return;
/* Try to parse the output constraint. If that fails, there's
no point in going further. */
constraint = constraints[i];
if (!parse_output_constraint (&constraint, i, ninputs, noutputs,
&allows_mem, &allows_reg, &is_inout))
return;
if (! allows_reg
&& (allows_mem
|| is_inout
|| (DECL_P (val)
&& REG_P (DECL_RTL (val))
&& GET_MODE (DECL_RTL (val)) != TYPE_MODE (type))))
lang_hooks.mark_addressable (val);
if (is_inout)
ninout++;
}
ninputs += ninout;
if (ninputs + noutputs > MAX_RECOG_OPERANDS)
{
error ("more than %d operands in %", MAX_RECOG_OPERANDS);
return;
}
for (i = 0, tail = inputs; tail; i++, tail = TREE_CHAIN (tail))
{
bool allows_reg, allows_mem;
const char *constraint;
/* If there's an erroneous arg, emit no insn, because the ASM_INPUT
would get VOIDmode and that could cause a crash in reload. */
if (TREE_TYPE (TREE_VALUE (tail)) == error_mark_node)
return;
constraint = constraints[i + noutputs];
if (! parse_input_constraint (&constraint, i, ninputs, noutputs, ninout,
constraints, &allows_mem, &allows_reg))
return;
if (! allows_reg && allows_mem)
lang_hooks.mark_addressable (TREE_VALUE (tail));
}
/* Second pass evaluates arguments. */
ninout = 0;
for (i = 0, tail = outputs; tail; tail = TREE_CHAIN (tail), i++)
{
tree val = TREE_VALUE (tail);
tree type = TREE_TYPE (val);
bool is_inout;
bool allows_reg;
bool allows_mem;
rtx op;
bool ok;
ok = parse_output_constraint (&constraints[i], i, ninputs,
noutputs, &allows_mem, &allows_reg,
&is_inout);
gcc_assert (ok);
/* If an output operand is not a decl or indirect ref and our constraint
allows a register, make a temporary to act as an intermediate.
Make the asm insn write into that, then our caller will copy it to
the real output operand. Likewise for promoted variables. */
generating_concat_p = 0;
real_output_rtx[i] = NULL_RTX;
if ((TREE_CODE (val) == INDIRECT_REF
&& allows_mem)
|| (DECL_P (val)
&& (allows_mem || REG_P (DECL_RTL (val)))
&& ! (REG_P (DECL_RTL (val))
&& GET_MODE (DECL_RTL (val)) != TYPE_MODE (type)))
|| ! allows_reg
|| is_inout)
{
op = expand_expr (val, NULL_RTX, VOIDmode, EXPAND_WRITE);
if (MEM_P (op))
op = validize_mem (op);
if (! allows_reg && !MEM_P (op))
error ("output number %d not directly addressable", i);
if ((! allows_mem && MEM_P (op))
|| GET_CODE (op) == CONCAT)
{
real_output_rtx[i] = op;
op = gen_reg_rtx (GET_MODE (op));
if (is_inout)
emit_move_insn (op, real_output_rtx[i]);
}
}
else
{
op = assign_temp (type, 0, 0, 1);
op = validize_mem (op);
TREE_VALUE (tail) = make_tree (type, op);
}
output_rtx[i] = op;
generating_concat_p = old_generating_concat_p;
if (is_inout)
{
inout_mode[ninout] = TYPE_MODE (type);
inout_opnum[ninout++] = i;
}
if (tree_conflicts_with_clobbers_p (val, &clobbered_regs))
clobber_conflict_found = 1;
}
/* Make vectors for the expression-rtx, constraint strings,
and named operands. */
argvec = rtvec_alloc (ninputs);
constraintvec = rtvec_alloc (ninputs);
body = gen_rtx_ASM_OPERANDS ((noutputs == 0 ? VOIDmode
: GET_MODE (output_rtx[0])),
ggc_strdup (TREE_STRING_POINTER (string)),
empty_string, 0, argvec, constraintvec,
locus);
MEM_VOLATILE_P (body) = vol;
/* Eval the inputs and put them into ARGVEC.
Put their constraints into ASM_INPUTs and store in CONSTRAINTS. */
for (i = 0, tail = inputs; tail; tail = TREE_CHAIN (tail), ++i)
{
bool allows_reg, allows_mem;
const char *constraint;
tree val, type;
rtx op;
bool ok;
constraint = constraints[i + noutputs];
ok = parse_input_constraint (&constraint, i, ninputs, noutputs, ninout,
constraints, &allows_mem, &allows_reg);
gcc_assert (ok);
generating_concat_p = 0;
val = TREE_VALUE (tail);
type = TREE_TYPE (val);
/* EXPAND_INITIALIZER will not generate code for valid initializer
constants, but will still generate code for other types of operand.
This is the behavior we want for constant constraints. */
op = expand_expr (val, NULL_RTX, VOIDmode,
allows_reg ? EXPAND_NORMAL
: allows_mem ? EXPAND_MEMORY
: EXPAND_INITIALIZER);
/* Never pass a CONCAT to an ASM. */
if (GET_CODE (op) == CONCAT)
op = force_reg (GET_MODE (op), op);
else if (MEM_P (op))
op = validize_mem (op);
if (asm_operand_ok (op, constraint, NULL) <= 0)
{
if (allows_reg && TYPE_MODE (type) != BLKmode)
op = force_reg (TYPE_MODE (type), op);
else if (!allows_mem)
warning (0, "asm operand %d probably doesn%'t match constraints",
i + noutputs);
else if (MEM_P (op))
{
/* We won't recognize either volatile memory or memory
with a queued address as available a memory_operand
at this point. Ignore it: clearly this *is* a memory. */
}
else
{
warning (0, "use of memory input without lvalue in "
"asm operand %d is deprecated", i + noutputs);
if (CONSTANT_P (op))
{
rtx mem = force_const_mem (TYPE_MODE (type), op);
if (mem)
op = validize_mem (mem);
else
op = force_reg (TYPE_MODE (type), op);
}
if (REG_P (op)
|| GET_CODE (op) == SUBREG
|| GET_CODE (op) == CONCAT)
{
tree qual_type = build_qualified_type (type,
(TYPE_QUALS (type)
| TYPE_QUAL_CONST));
rtx memloc = assign_temp (qual_type, 1, 1, 1);
memloc = validize_mem (memloc);
emit_move_insn (memloc, op);
op = memloc;
}
}
}
generating_concat_p = old_generating_concat_p;
ASM_OPERANDS_INPUT (body, i) = op;
ASM_OPERANDS_INPUT_CONSTRAINT_EXP (body, i)
= gen_rtx_ASM_INPUT (TYPE_MODE (type),
ggc_strdup (constraints[i + noutputs]));
if (tree_conflicts_with_clobbers_p (val, &clobbered_regs))
clobber_conflict_found = 1;
}
/* Protect all the operands from the queue now that they have all been
evaluated. */
generating_concat_p = 0;
/* For in-out operands, copy output rtx to input rtx. */
for (i = 0; i < ninout; i++)
{
int j = inout_opnum[i];
char buffer[16];
ASM_OPERANDS_INPUT (body, ninputs - ninout + i)
= output_rtx[j];
sprintf (buffer, "%d", j);
ASM_OPERANDS_INPUT_CONSTRAINT_EXP (body, ninputs - ninout + i)
= gen_rtx_ASM_INPUT (inout_mode[i], ggc_strdup (buffer));
}
generating_concat_p = old_generating_concat_p;
/* Now, for each output, construct an rtx
(set OUTPUT (asm_operands INSN OUTPUTCONSTRAINT OUTPUTNUMBER
ARGVEC CONSTRAINTS OPNAMES))
If there is more than one, put them inside a PARALLEL. */
if (noutputs == 1 && nclobbers == 0)
{
ASM_OPERANDS_OUTPUT_CONSTRAINT (body) = ggc_strdup (constraints[0]);
emit_insn (gen_rtx_SET (VOIDmode, output_rtx[0], body));
}
else if (noutputs == 0 && nclobbers == 0)
{
/* No output operands: put in a raw ASM_OPERANDS rtx. */
emit_insn (body);
}
else
{
rtx obody = body;
int num = noutputs;
if (num == 0)
num = 1;
body = gen_rtx_PARALLEL (VOIDmode, rtvec_alloc (num + nclobbers));
/* For each output operand, store a SET. */
for (i = 0, tail = outputs; tail; tail = TREE_CHAIN (tail), i++)
{
XVECEXP (body, 0, i)
= gen_rtx_SET (VOIDmode,
output_rtx[i],
gen_rtx_ASM_OPERANDS
(GET_MODE (output_rtx[i]),
ggc_strdup (TREE_STRING_POINTER (string)),
ggc_strdup (constraints[i]),
i, argvec, constraintvec, locus));
MEM_VOLATILE_P (SET_SRC (XVECEXP (body, 0, i))) = vol;
}
/* If there are no outputs (but there are some clobbers)
store the bare ASM_OPERANDS into the PARALLEL. */
if (i == 0)
XVECEXP (body, 0, i++) = obody;
/* Store (clobber REG) for each clobbered register specified. */
for (tail = clobbers; tail; tail = TREE_CHAIN (tail))
{
const char *regname = TREE_STRING_POINTER (TREE_VALUE (tail));
int j = decode_reg_name (regname);
rtx clobbered_reg;
if (j < 0)
{
if (j == -3) /* `cc', which is not a register */
continue;
if (j == -4) /* `memory', don't cache memory across asm */
{
XVECEXP (body, 0, i++)
= gen_rtx_CLOBBER (VOIDmode,
gen_rtx_MEM
(BLKmode,
gen_rtx_SCRATCH (VOIDmode)));
continue;
}
/* Ignore unknown register, error already signaled. */
continue;
}
/* Use QImode since that's guaranteed to clobber just one reg. */
clobbered_reg = gen_rtx_REG (QImode, j);
/* Do sanity check for overlap between clobbers and respectively
input and outputs that hasn't been handled. Such overlap
should have been detected and reported above. */
if (!clobber_conflict_found)
{
int opno;
/* We test the old body (obody) contents to avoid tripping
over the under-construction body. */
for (opno = 0; opno < noutputs; opno++)
if (reg_overlap_mentioned_p (clobbered_reg, output_rtx[opno]))
internal_error ("asm clobber conflict with output operand");
for (opno = 0; opno < ninputs - ninout; opno++)
if (reg_overlap_mentioned_p (clobbered_reg,
ASM_OPERANDS_INPUT (obody, opno)))
internal_error ("asm clobber conflict with input operand");
}
XVECEXP (body, 0, i++)
= gen_rtx_CLOBBER (VOIDmode, clobbered_reg);
}
emit_insn (body);
}
/* For any outputs that needed reloading into registers, spill them
back to where they belong. */
for (i = 0; i < noutputs; ++i)
if (real_output_rtx[i])
emit_move_insn (real_output_rtx[i], output_rtx[i]);
crtl->has_asm_statement = 1;
coverage_has_asm_stmt ();
free_temp_slots ();
}
void
expand_asm_expr (tree exp)
{
int noutputs, i;
tree outputs, tail;
tree *o;
if (ASM_INPUT_P (exp))
{
expand_asm_loc (ASM_STRING (exp), ASM_VOLATILE_P (exp), input_location);
return;
}
outputs = ASM_OUTPUTS (exp);
noutputs = list_length (outputs);
/* o[I] is the place that output number I should be written. */
o = (tree *) alloca (noutputs * sizeof (tree));
/* Record the contents of OUTPUTS before it is modified. */
for (i = 0, tail = outputs; tail; tail = TREE_CHAIN (tail), i++)
o[i] = TREE_VALUE (tail);
/* Generate the ASM_OPERANDS insn; store into the TREE_VALUEs of
OUTPUTS some trees for where the values were actually stored. */
expand_asm_operands (ASM_STRING (exp), outputs, ASM_INPUTS (exp),
ASM_CLOBBERS (exp), ASM_VOLATILE_P (exp),
input_location);
/* Copy all the intermediate outputs into the specified outputs. */
for (i = 0, tail = outputs; tail; tail = TREE_CHAIN (tail), i++)
{
if (o[i] != TREE_VALUE (tail))
{
expand_assignment (o[i], TREE_VALUE (tail), false);
free_temp_slots ();
/* Restore the original value so that it's correct the next
time we expand this function. */
TREE_VALUE (tail) = o[i];
}
}
}
/* A subroutine of expand_asm_operands. Check that all operands have
the same number of alternatives. Return true if so. */
static bool
check_operand_nalternatives (tree outputs, tree inputs)
{
if (outputs || inputs)
{
tree tmp = TREE_PURPOSE (outputs ? outputs : inputs);
int nalternatives
= n_occurrences (',', TREE_STRING_POINTER (TREE_VALUE (tmp)));
tree next = inputs;
if (nalternatives + 1 > MAX_RECOG_ALTERNATIVES)
{
error ("too many alternatives in %");
return false;
}
tmp = outputs;
while (tmp)
{
const char *constraint
= TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (tmp)));
if (n_occurrences (',', constraint) != nalternatives)
{
error ("operand constraints for % differ "
"in number of alternatives");
return false;
}
if (TREE_CHAIN (tmp))
tmp = TREE_CHAIN (tmp);
else
tmp = next, next = 0;
}
}
return true;
}
/* A subroutine of expand_asm_operands. Check that all operand names
are unique. Return true if so. We rely on the fact that these names
are identifiers, and so have been canonicalized by get_identifier,
so all we need are pointer comparisons. */
static bool
check_unique_operand_names (tree outputs, tree inputs)
{
tree i, j;
for (i = outputs; i ; i = TREE_CHAIN (i))
{
tree i_name = TREE_PURPOSE (TREE_PURPOSE (i));
if (! i_name)
continue;
for (j = TREE_CHAIN (i); j ; j = TREE_CHAIN (j))
if (simple_cst_equal (i_name, TREE_PURPOSE (TREE_PURPOSE (j))))
goto failure;
}
for (i = inputs; i ; i = TREE_CHAIN (i))
{
tree i_name = TREE_PURPOSE (TREE_PURPOSE (i));
if (! i_name)
continue;
for (j = TREE_CHAIN (i); j ; j = TREE_CHAIN (j))
if (simple_cst_equal (i_name, TREE_PURPOSE (TREE_PURPOSE (j))))
goto failure;
for (j = outputs; j ; j = TREE_CHAIN (j))
if (simple_cst_equal (i_name, TREE_PURPOSE (TREE_PURPOSE (j))))
goto failure;
}
return true;
failure:
error ("duplicate asm operand name %qs",
TREE_STRING_POINTER (TREE_PURPOSE (TREE_PURPOSE (i))));
return false;
}
/* A subroutine of expand_asm_operands. Resolve the names of the operands
in *POUTPUTS and *PINPUTS to numbers, and replace the name expansions in
STRING and in the constraints to those numbers. */
tree
resolve_asm_operand_names (tree string, tree outputs, tree inputs)
{
char *buffer;
char *p;
const char *c;
tree t;
check_unique_operand_names (outputs, inputs);
/* Substitute [] in input constraint strings. There should be no
named operands in output constraints. */
for (t = inputs; t ; t = TREE_CHAIN (t))
{
c = TREE_STRING_POINTER (TREE_VALUE (TREE_PURPOSE (t)));
if (strchr (c, '[') != NULL)
{
p = buffer = xstrdup (c);
while ((p = strchr (p, '[')) != NULL)
p = resolve_operand_name_1 (p, outputs, inputs);
TREE_VALUE (TREE_PURPOSE (t))
= build_string (strlen (buffer), buffer);
free (buffer);
}
}
/* Now check for any needed substitutions in the template. */
c = TREE_STRING_POINTER (string);
while ((c = strchr (c, '%')) != NULL)
{
if (c[1] == '[')
break;
else if (ISALPHA (c[1]) && c[2] == '[')
break;
else
{
c += 1;
continue;
}
}
if (c)
{
/* OK, we need to make a copy so we can perform the substitutions.
Assume that we will not need extra space--we get to remove '['
and ']', which means we cannot have a problem until we have more
than 999 operands. */
buffer = xstrdup (TREE_STRING_POINTER (string));
p = buffer + (c - TREE_STRING_POINTER (string));
while ((p = strchr (p, '%')) != NULL)
{
if (p[1] == '[')
p += 1;
else if (ISALPHA (p[1]) && p[2] == '[')
p += 2;
else
{
p += 1;
continue;
}
p = resolve_operand_name_1 (p, outputs, inputs);
}
string = build_string (strlen (buffer), buffer);
free (buffer);
}
return string;
}
/* A subroutine of resolve_operand_names. P points to the '[' for a
potential named operand of the form []. In place, replace
the name and brackets with a number. Return a pointer to the
balance of the string after substitution. */
static char *
resolve_operand_name_1 (char *p, tree outputs, tree inputs)
{
char *q;
int op;
tree t;
size_t len;
/* Collect the operand name. */
q = strchr (p, ']');
if (!q)
{
error ("missing close brace for named operand");
return strchr (p, '\0');
}
len = q - p - 1;
/* Resolve the name to a number. */
for (op = 0, t = outputs; t ; t = TREE_CHAIN (t), op++)
{
tree name = TREE_PURPOSE (TREE_PURPOSE (t));
if (name)
{
const char *c = TREE_STRING_POINTER (name);
if (strncmp (c, p + 1, len) == 0 && c[len] == '\0')
goto found;
}
}
for (t = inputs; t ; t = TREE_CHAIN (t), op++)
{
tree name = TREE_PURPOSE (TREE_PURPOSE (t));
if (name)
{
const char *c = TREE_STRING_POINTER (name);
if (strncmp (c, p + 1, len) == 0 && c[len] == '\0')
goto found;
}
}
*q = '\0';
error ("undefined named operand %qs", p + 1);
op = 0;
found:
/* Replace the name with the number. Unfortunately, not all libraries
get the return value of sprintf correct, so search for the end of the
generated string by hand. */
sprintf (p, "%d", op);
p = strchr (p, '\0');
/* Verify the no extra buffer space assumption. */
gcc_assert (p <= q);
/* Shift the rest of the buffer down to fill the gap. */
memmove (p, q + 1, strlen (q + 1) + 1);
return p;
}
/* Generate RTL to evaluate the expression EXP. */
void
expand_expr_stmt (tree exp)
{
rtx value;
tree type;
value = expand_expr (exp, const0_rtx, VOIDmode, EXPAND_NORMAL);
type = TREE_TYPE (exp);
/* If all we do is reference a volatile value in memory,
copy it to a register to be sure it is actually touched. */
if (value && MEM_P (value) && TREE_THIS_VOLATILE (exp))
{
if (TYPE_MODE (type) == VOIDmode)
;
else if (TYPE_MODE (type) != BLKmode)
value = copy_to_reg (value);
else
{
rtx lab = gen_label_rtx ();
/* Compare the value with itself to reference it. */
emit_cmp_and_jump_insns (value, value, EQ,
expand_normal (TYPE_SIZE (type)),
BLKmode, 0, lab);
emit_label (lab);
}
}
/* Free any temporaries used to evaluate this expression. */
free_temp_slots ();
}
/* Warn if EXP contains any computations whose results are not used.
Return 1 if a warning is printed; 0 otherwise. LOCUS is the
(potential) location of the expression. */
int
warn_if_unused_value (const_tree exp, location_t locus)
{
restart:
if (TREE_USED (exp) || TREE_NO_WARNING (exp))
return 0;
/* Don't warn about void constructs. This includes casting to void,
void function calls, and statement expressions with a final cast
to void. */
if (VOID_TYPE_P (TREE_TYPE (exp)))
return 0;
if (EXPR_HAS_LOCATION (exp))
locus = EXPR_LOCATION (exp);
switch (TREE_CODE (exp))
{
case PREINCREMENT_EXPR:
case POSTINCREMENT_EXPR:
case PREDECREMENT_EXPR:
case POSTDECREMENT_EXPR:
case MODIFY_EXPR:
case INIT_EXPR:
case TARGET_EXPR:
case CALL_EXPR:
case TRY_CATCH_EXPR:
case WITH_CLEANUP_EXPR:
case EXIT_EXPR:
case VA_ARG_EXPR:
return 0;
case BIND_EXPR:
/* For a binding, warn if no side effect within it. */
exp = BIND_EXPR_BODY (exp);
goto restart;
case SAVE_EXPR:
case NON_LVALUE_EXPR:
exp = TREE_OPERAND (exp, 0);
goto restart;
case TRUTH_ORIF_EXPR:
case TRUTH_ANDIF_EXPR:
/* In && or ||, warn if 2nd operand has no side effect. */
exp = TREE_OPERAND (exp, 1);
goto restart;
case COMPOUND_EXPR:
if (warn_if_unused_value (TREE_OPERAND (exp, 0), locus))
return 1;
/* Let people do `(foo (), 0)' without a warning. */
if (TREE_CONSTANT (TREE_OPERAND (exp, 1)))
return 0;
exp = TREE_OPERAND (exp, 1);
goto restart;
case COND_EXPR:
/* If this is an expression with side effects, don't warn; this
case commonly appears in macro expansions. */
if (TREE_SIDE_EFFECTS (exp))
return 0;
goto warn;
case INDIRECT_REF:
/* Don't warn about automatic dereferencing of references, since
the user cannot control it. */
if (TREE_CODE (TREE_TYPE (TREE_OPERAND (exp, 0))) == REFERENCE_TYPE)
{
exp = TREE_OPERAND (exp, 0);
goto restart;
}
/* Fall through. */
default:
/* Referencing a volatile value is a side effect, so don't warn. */
if ((DECL_P (exp) || REFERENCE_CLASS_P (exp))
&& TREE_THIS_VOLATILE (exp))
return 0;
/* If this is an expression which has no operands, there is no value
to be unused. There are no such language-independent codes,
but front ends may define such. */
if (EXPRESSION_CLASS_P (exp) && TREE_OPERAND_LENGTH (exp) == 0)
return 0;
warn:
warning (OPT_Wunused_value, "%Hvalue computed is not used", &locus);
return 1;
}
}
/* Generate RTL to return from the current function, with no value.
(That is, we do not do anything about returning any value.) */
void
expand_null_return (void)
{
/* If this function was declared to return a value, but we
didn't, clobber the return registers so that they are not
propagated live to the rest of the function. */
clobber_return_register ();
expand_null_return_1 ();
}
/* Generate RTL to return directly from the current function.
(That is, we bypass any return value.) */
void
expand_naked_return (void)
{
rtx end_label;
clear_pending_stack_adjust ();
do_pending_stack_adjust ();
end_label = naked_return_label;
if (end_label == 0)
end_label = naked_return_label = gen_label_rtx ();
emit_jump (end_label);
}
/* Generate RTL to return from the current function, with value VAL. */
static void
expand_value_return (rtx val)
{
/* Copy the value to the return location
unless it's already there. */
rtx return_reg = DECL_RTL (DECL_RESULT (current_function_decl));
if (return_reg != val)
{
tree type = TREE_TYPE (DECL_RESULT (current_function_decl));
if (targetm.calls.promote_function_return (TREE_TYPE (current_function_decl)))
{
int unsignedp = TYPE_UNSIGNED (type);
enum machine_mode old_mode
= DECL_MODE (DECL_RESULT (current_function_decl));
enum machine_mode mode
= promote_mode (type, old_mode, &unsignedp, 1);
if (mode != old_mode)
val = convert_modes (mode, old_mode, val, unsignedp);
}
if (GET_CODE (return_reg) == PARALLEL)
emit_group_load (return_reg, val, type, int_size_in_bytes (type));
else
emit_move_insn (return_reg, val);
}
expand_null_return_1 ();
}
/* Output a return with no value. */
static void
expand_null_return_1 (void)
{
clear_pending_stack_adjust ();
do_pending_stack_adjust ();
emit_jump (return_label);
}
/* Generate RTL to evaluate the expression RETVAL and return it
from the current function. */
void
expand_return (tree retval)
{
rtx result_rtl;
rtx val = 0;
tree retval_rhs;
/* If function wants no value, give it none. */
if (TREE_CODE (TREE_TYPE (TREE_TYPE (current_function_decl))) == VOID_TYPE)
{
expand_normal (retval);
expand_null_return ();
return;
}
if (retval == error_mark_node)
{
/* Treat this like a return of no value from a function that
returns a value. */
expand_null_return ();
return;
}
else if ((TREE_CODE (retval) == MODIFY_EXPR
|| TREE_CODE (retval) == INIT_EXPR)
&& TREE_CODE (TREE_OPERAND (retval, 0)) == RESULT_DECL)
retval_rhs = TREE_OPERAND (retval, 1);
else
retval_rhs = retval;
result_rtl = DECL_RTL (DECL_RESULT (current_function_decl));
/* If we are returning the RESULT_DECL, then the value has already
been stored into it, so we don't have to do anything special. */
if (TREE_CODE (retval_rhs) == RESULT_DECL)
expand_value_return (result_rtl);
/* If the result is an aggregate that is being returned in one (or more)
registers, load the registers here. The compiler currently can't handle
copying a BLKmode value into registers. We could put this code in a
more general area (for use by everyone instead of just function
call/return), but until this feature is generally usable it is kept here
(and in expand_call). */
else if (retval_rhs != 0
&& TYPE_MODE (TREE_TYPE (retval_rhs)) == BLKmode
&& REG_P (result_rtl))
{
int i;
unsigned HOST_WIDE_INT bitpos, xbitpos;
unsigned HOST_WIDE_INT padding_correction = 0;
unsigned HOST_WIDE_INT bytes
= int_size_in_bytes (TREE_TYPE (retval_rhs));
int n_regs = (bytes + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
unsigned int bitsize
= MIN (TYPE_ALIGN (TREE_TYPE (retval_rhs)), BITS_PER_WORD);
rtx *result_pseudos = XALLOCAVEC (rtx, n_regs);
rtx result_reg, src = NULL_RTX, dst = NULL_RTX;
rtx result_val = expand_normal (retval_rhs);
enum machine_mode tmpmode, result_reg_mode;
if (bytes == 0)
{
expand_null_return ();
return;
}
/* If the structure doesn't take up a whole number of words, see
whether the register value should be padded on the left or on
the right. Set PADDING_CORRECTION to the number of padding
bits needed on the left side.
In most ABIs, the structure will be returned at the least end of
the register, which translates to right padding on little-endian
targets and left padding on big-endian targets. The opposite
holds if the structure is returned at the most significant
end of the register. */
if (bytes % UNITS_PER_WORD != 0
&& (targetm.calls.return_in_msb (TREE_TYPE (retval_rhs))
? !BYTES_BIG_ENDIAN
: BYTES_BIG_ENDIAN))
padding_correction = (BITS_PER_WORD - ((bytes % UNITS_PER_WORD)
* BITS_PER_UNIT));
/* Copy the structure BITSIZE bits at a time. */
for (bitpos = 0, xbitpos = padding_correction;
bitpos < bytes * BITS_PER_UNIT;
bitpos += bitsize, xbitpos += bitsize)
{
/* We need a new destination pseudo each time xbitpos is
on a word boundary and when xbitpos == padding_correction
(the first time through). */
if (xbitpos % BITS_PER_WORD == 0
|| xbitpos == padding_correction)
{
/* Generate an appropriate register. */
dst = gen_reg_rtx (word_mode);
result_pseudos[xbitpos / BITS_PER_WORD] = dst;
/* Clear the destination before we move anything into it. */
emit_move_insn (dst, CONST0_RTX (GET_MODE (dst)));
}
/* We need a new source operand each time bitpos is on a word
boundary. */
if (bitpos % BITS_PER_WORD == 0)
src = operand_subword_force (result_val,
bitpos / BITS_PER_WORD,
BLKmode);
/* Use bitpos for the source extraction (left justified) and
xbitpos for the destination store (right justified). */
store_bit_field (dst, bitsize, xbitpos % BITS_PER_WORD, word_mode,
extract_bit_field (src, bitsize,
bitpos % BITS_PER_WORD, 1,
NULL_RTX, word_mode, word_mode));
}
tmpmode = GET_MODE (result_rtl);
if (tmpmode == BLKmode)
{
/* Find the smallest integer mode large enough to hold the
entire structure and use that mode instead of BLKmode
on the USE insn for the return register. */
for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
tmpmode != VOIDmode;
tmpmode = GET_MODE_WIDER_MODE (tmpmode))
/* Have we found a large enough mode? */
if (GET_MODE_SIZE (tmpmode) >= bytes)
break;
/* A suitable mode should have been found. */
gcc_assert (tmpmode != VOIDmode);
PUT_MODE (result_rtl, tmpmode);
}
if (GET_MODE_SIZE (tmpmode) < GET_MODE_SIZE (word_mode))
result_reg_mode = word_mode;
else
result_reg_mode = tmpmode;
result_reg = gen_reg_rtx (result_reg_mode);
for (i = 0; i < n_regs; i++)
emit_move_insn (operand_subword (result_reg, i, 0, result_reg_mode),
result_pseudos[i]);
if (tmpmode != result_reg_mode)
result_reg = gen_lowpart (tmpmode, result_reg);
expand_value_return (result_reg);
}
else if (retval_rhs != 0
&& !VOID_TYPE_P (TREE_TYPE (retval_rhs))
&& (REG_P (result_rtl)
|| (GET_CODE (result_rtl) == PARALLEL)))
{
/* Calculate the return value into a temporary (usually a pseudo
reg). */
tree ot = TREE_TYPE (DECL_RESULT (current_function_decl));
tree nt = build_qualified_type (ot, TYPE_QUALS (ot) | TYPE_QUAL_CONST);
val = assign_temp (nt, 0, 0, 1);
val = expand_expr (retval_rhs, val, GET_MODE (val), EXPAND_NORMAL);
val = force_not_mem (val);
/* Return the calculated value. */
expand_value_return (val);
}
else
{
/* No hard reg used; calculate value into hard return reg. */
expand_expr (retval, const0_rtx, VOIDmode, EXPAND_NORMAL);
expand_value_return (result_rtl);
}
}
/* Emit code to restore vital registers at the beginning of a nonlocal goto
handler. */
static void
expand_nl_goto_receiver (void)
{
/* Clobber the FP when we get here, so we have to make sure it's
marked as used by this function. */
emit_use (hard_frame_pointer_rtx);
/* Mark the static chain as clobbered here so life information
doesn't get messed up for it. */
emit_clobber (static_chain_rtx);
#ifdef HAVE_nonlocal_goto
if (! HAVE_nonlocal_goto)
#endif
/* First adjust our frame pointer to its actual value. It was
previously set to the start of the virtual area corresponding to
the stacked variables when we branched here and now needs to be
adjusted to the actual hardware fp value.
Assignments are to virtual registers are converted by
instantiate_virtual_regs into the corresponding assignment
to the underlying register (fp in this case) that makes
the original assignment true.
So the following insn will actually be
decrementing fp by STARTING_FRAME_OFFSET. */
emit_move_insn (virtual_stack_vars_rtx, hard_frame_pointer_rtx);
#if ARG_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
if (fixed_regs[ARG_POINTER_REGNUM])
{
#ifdef ELIMINABLE_REGS
/* If the argument pointer can be eliminated in favor of the
frame pointer, we don't need to restore it. We assume here
that if such an elimination is present, it can always be used.
This is the case on all known machines; if we don't make this
assumption, we do unnecessary saving on many machines. */
static const struct elims {const int from, to;} elim_regs[] = ELIMINABLE_REGS;
size_t i;
for (i = 0; i < ARRAY_SIZE (elim_regs); i++)
if (elim_regs[i].from == ARG_POINTER_REGNUM
&& elim_regs[i].to == HARD_FRAME_POINTER_REGNUM)
break;
if (i == ARRAY_SIZE (elim_regs))
#endif
{
/* Now restore our arg pointer from the address at which it
was saved in our stack frame. */
emit_move_insn (crtl->args.internal_arg_pointer,
copy_to_reg (get_arg_pointer_save_area ()));
}
}
#endif
#ifdef HAVE_nonlocal_goto_receiver
if (HAVE_nonlocal_goto_receiver)
emit_insn (gen_nonlocal_goto_receiver ());
#endif
/* We must not allow the code we just generated to be reordered by
scheduling. Specifically, the update of the frame pointer must
happen immediately, not later. */
emit_insn (gen_blockage ());
}
/* Generate RTL for the automatic variable declaration DECL.
(Other kinds of declarations are simply ignored if seen here.) */
void
expand_decl (tree decl)
{
tree type;
type = TREE_TYPE (decl);
/* For a CONST_DECL, set mode, alignment, and sizes from those of the
type in case this node is used in a reference. */
if (TREE_CODE (decl) == CONST_DECL)
{
DECL_MODE (decl) = TYPE_MODE (type);
DECL_ALIGN (decl) = TYPE_ALIGN (type);
DECL_SIZE (decl) = TYPE_SIZE (type);
DECL_SIZE_UNIT (decl) = TYPE_SIZE_UNIT (type);
return;
}
/* Otherwise, only automatic variables need any expansion done. Static and
external variables, and external functions, will be handled by
`assemble_variable' (called from finish_decl). TYPE_DECL requires
nothing. PARM_DECLs are handled in `assign_parms'. */
if (TREE_CODE (decl) != VAR_DECL)
return;
if (TREE_STATIC (decl) || DECL_EXTERNAL (decl))
return;
/* Create the RTL representation for the variable. */
if (type == error_mark_node)
SET_DECL_RTL (decl, gen_rtx_MEM (BLKmode, const0_rtx));
else if (DECL_SIZE (decl) == 0)
{
/* Variable with incomplete type. */
rtx x;
if (DECL_INITIAL (decl) == 0)
/* Error message was already done; now avoid a crash. */
x = gen_rtx_MEM (BLKmode, const0_rtx);
else
/* An initializer is going to decide the size of this array.
Until we know the size, represent its address with a reg. */
x = gen_rtx_MEM (BLKmode, gen_reg_rtx (Pmode));
set_mem_attributes (x, decl, 1);
SET_DECL_RTL (decl, x);
}
else if (use_register_for_decl (decl))
{
/* Automatic variable that can go in a register. */
int unsignedp = TYPE_UNSIGNED (type);
enum machine_mode reg_mode
= promote_mode (type, DECL_MODE (decl), &unsignedp, 0);
SET_DECL_RTL (decl, gen_reg_rtx (reg_mode));
/* Note if the object is a user variable. */
if (!DECL_ARTIFICIAL (decl))
mark_user_reg (DECL_RTL (decl));
if (POINTER_TYPE_P (type))
mark_reg_pointer (DECL_RTL (decl),
TYPE_ALIGN (TREE_TYPE (TREE_TYPE (decl))));
}
else
{
rtx oldaddr = 0;
rtx addr;
rtx x;
/* Variable-sized decls are dealt with in the gimplifier. */
gcc_assert (TREE_CODE (DECL_SIZE_UNIT (decl)) == INTEGER_CST);
/* If we previously made RTL for this decl, it must be an array
whose size was determined by the initializer.
The old address was a register; set that register now
to the proper address. */
if (DECL_RTL_SET_P (decl))
{
gcc_assert (MEM_P (DECL_RTL (decl)));
gcc_assert (REG_P (XEXP (DECL_RTL (decl), 0)));
oldaddr = XEXP (DECL_RTL (decl), 0);
}
/* Set alignment we actually gave this decl. */
DECL_ALIGN (decl) = (DECL_MODE (decl) == BLKmode ? BIGGEST_ALIGNMENT
: GET_MODE_BITSIZE (DECL_MODE (decl)));
DECL_USER_ALIGN (decl) = 0;
x = assign_temp (decl, 1, 1, 1);
set_mem_attributes (x, decl, 1);
SET_DECL_RTL (decl, x);
if (oldaddr)
{
addr = force_operand (XEXP (DECL_RTL (decl), 0), oldaddr);
if (addr != oldaddr)
emit_move_insn (oldaddr, addr);
}
}
}
/* Emit code to save the current value of stack. */
rtx
expand_stack_save (void)
{
rtx ret = NULL_RTX;
do_pending_stack_adjust ();
emit_stack_save (SAVE_BLOCK, &ret, NULL_RTX);
return ret;
}
/* Emit code to restore the current value of stack. */
void
expand_stack_restore (tree var)
{
rtx sa = expand_normal (var);
sa = convert_memory_address (Pmode, sa);
emit_stack_restore (SAVE_BLOCK, sa, NULL_RTX);
}
/* Do the insertion of a case label into case_list. The labels are
fed to us in descending order from the sorted vector of case labels used
in the tree part of the middle end. So the list we construct is
sorted in ascending order. The bounds on the case range, LOW and HIGH,
are converted to case's index type TYPE. */
static struct case_node *
add_case_node (struct case_node *head, tree type, tree low, tree high,
tree label, alloc_pool case_node_pool)
{
tree min_value, max_value;
struct case_node *r;
gcc_assert (TREE_CODE (low) == INTEGER_CST);
gcc_assert (!high || TREE_CODE (high) == INTEGER_CST);
min_value = TYPE_MIN_VALUE (type);
max_value = TYPE_MAX_VALUE (type);
/* If there's no HIGH value, then this is not a case range; it's
just a simple case label. But that's just a degenerate case
range.
If the bounds are equal, turn this into the one-value case. */
if (!high || tree_int_cst_equal (low, high))
{
/* If the simple case value is unreachable, ignore it. */
if ((TREE_CODE (min_value) == INTEGER_CST
&& tree_int_cst_compare (low, min_value) < 0)
|| (TREE_CODE (max_value) == INTEGER_CST
&& tree_int_cst_compare (low, max_value) > 0))
return head;
low = fold_convert (type, low);
high = low;
}
else
{
/* If the entire case range is unreachable, ignore it. */
if ((TREE_CODE (min_value) == INTEGER_CST
&& tree_int_cst_compare (high, min_value) < 0)
|| (TREE_CODE (max_value) == INTEGER_CST
&& tree_int_cst_compare (low, max_value) > 0))
return head;
/* If the lower bound is less than the index type's minimum
value, truncate the range bounds. */
if (TREE_CODE (min_value) == INTEGER_CST
&& tree_int_cst_compare (low, min_value) < 0)
low = min_value;
low = fold_convert (type, low);
/* If the upper bound is greater than the index type's maximum
value, truncate the range bounds. */
if (TREE_CODE (max_value) == INTEGER_CST
&& tree_int_cst_compare (high, max_value) > 0)
high = max_value;
high = fold_convert (type, high);
}
/* Add this label to the chain. Make sure to drop overflow flags. */
r = (struct case_node *) pool_alloc (case_node_pool);
r->low = build_int_cst_wide (TREE_TYPE (low), TREE_INT_CST_LOW (low),
TREE_INT_CST_HIGH (low));
r->high = build_int_cst_wide (TREE_TYPE (high), TREE_INT_CST_LOW (high),
TREE_INT_CST_HIGH (high));
r->code_label = label;
r->parent = r->left = NULL;
r->right = head;
return r;
}
/* Maximum number of case bit tests. */
#define MAX_CASE_BIT_TESTS 3
/* By default, enable case bit tests on targets with ashlsi3. */
#ifndef CASE_USE_BIT_TESTS
#define CASE_USE_BIT_TESTS (optab_handler (ashl_optab, word_mode)->insn_code \
!= CODE_FOR_nothing)
#endif
/* A case_bit_test represents a set of case nodes that may be
selected from using a bit-wise comparison. HI and LO hold
the integer to be tested against, LABEL contains the label
to jump to upon success and BITS counts the number of case
nodes handled by this test, typically the number of bits
set in HI:LO. */
struct case_bit_test
{
HOST_WIDE_INT hi;
HOST_WIDE_INT lo;
rtx label;
int bits;
};
/* Determine whether "1 << x" is relatively cheap in word_mode. */
static
bool lshift_cheap_p (void)
{
static bool init = false;
static bool cheap = true;
if (!init)
{
rtx reg = gen_rtx_REG (word_mode, 10000);
int cost = rtx_cost (gen_rtx_ASHIFT (word_mode, const1_rtx, reg), SET,
optimize_insn_for_speed_p ());
cheap = cost < COSTS_N_INSNS (3);
init = true;
}
return cheap;
}
/* Comparison function for qsort to order bit tests by decreasing
number of case nodes, i.e. the node with the most cases gets
tested first. */
static int
case_bit_test_cmp (const void *p1, const void *p2)
{
const struct case_bit_test *const d1 = (const struct case_bit_test *) p1;
const struct case_bit_test *const d2 = (const struct case_bit_test *) p2;
if (d2->bits != d1->bits)
return d2->bits - d1->bits;
/* Stabilize the sort. */
return CODE_LABEL_NUMBER (d2->label) - CODE_LABEL_NUMBER (d1->label);
}
/* Expand a switch statement by a short sequence of bit-wise
comparisons. "switch(x)" is effectively converted into
"if ((1 << (x-MINVAL)) & CST)" where CST and MINVAL are
integer constants.
INDEX_EXPR is the value being switched on, which is of
type INDEX_TYPE. MINVAL is the lowest case value of in
the case nodes, of INDEX_TYPE type, and RANGE is highest
value minus MINVAL, also of type INDEX_TYPE. NODES is
the set of case nodes, and DEFAULT_LABEL is the label to
branch to should none of the cases match.
There *MUST* be MAX_CASE_BIT_TESTS or less unique case
node targets. */
static void
emit_case_bit_tests (tree index_type, tree index_expr, tree minval,
tree range, case_node_ptr nodes, rtx default_label)
{
struct case_bit_test test[MAX_CASE_BIT_TESTS];
enum machine_mode mode;
rtx expr, index, label;
unsigned int i,j,lo,hi;
struct case_node *n;
unsigned int count;
count = 0;
for (n = nodes; n; n = n->right)
{
label = label_rtx (n->code_label);
for (i = 0; i < count; i++)
if (label == test[i].label)
break;
if (i == count)
{
gcc_assert (count < MAX_CASE_BIT_TESTS);
test[i].hi = 0;
test[i].lo = 0;
test[i].label = label;
test[i].bits = 1;
count++;
}
else
test[i].bits++;
lo = tree_low_cst (fold_build2 (MINUS_EXPR, index_type,
n->low, minval), 1);
hi = tree_low_cst (fold_build2 (MINUS_EXPR, index_type,
n->high, minval), 1);
for (j = lo; j <= hi; j++)
if (j >= HOST_BITS_PER_WIDE_INT)
test[i].hi |= (HOST_WIDE_INT) 1 << (j - HOST_BITS_PER_INT);
else
test[i].lo |= (HOST_WIDE_INT) 1 << j;
}
qsort (test, count, sizeof(*test), case_bit_test_cmp);
index_expr = fold_build2 (MINUS_EXPR, index_type,
fold_convert (index_type, index_expr),
fold_convert (index_type, minval));
index = expand_normal (index_expr);
do_pending_stack_adjust ();
mode = TYPE_MODE (index_type);
expr = expand_normal (range);
if (default_label)
emit_cmp_and_jump_insns (index, expr, GTU, NULL_RTX, mode, 1,
default_label);
index = convert_to_mode (word_mode, index, 0);
index = expand_binop (word_mode, ashl_optab, const1_rtx,
index, NULL_RTX, 1, OPTAB_WIDEN);
for (i = 0; i < count; i++)
{
expr = immed_double_const (test[i].lo, test[i].hi, word_mode);
expr = expand_binop (word_mode, and_optab, index, expr,
NULL_RTX, 1, OPTAB_WIDEN);
emit_cmp_and_jump_insns (expr, const0_rtx, NE, NULL_RTX,
word_mode, 1, test[i].label);
}
if (default_label)
emit_jump (default_label);
}
#ifndef HAVE_casesi
#define HAVE_casesi 0
#endif
#ifndef HAVE_tablejump
#define HAVE_tablejump 0
#endif
/* Terminate a case (Pascal/Ada) or switch (C) statement
in which ORIG_INDEX is the expression to be tested.
If ORIG_TYPE is not NULL, it is the original ORIG_INDEX
type as given in the source before any compiler conversions.
Generate the code to test it and jump to the right place. */
void
expand_case (tree exp)
{
tree minval = NULL_TREE, maxval = NULL_TREE, range = NULL_TREE;
rtx default_label = 0;
struct case_node *n;
unsigned int count, uniq;
rtx index;
rtx table_label;
int ncases;
rtx *labelvec;
int i;
rtx before_case, end, lab;
tree vec = SWITCH_LABELS (exp);
tree orig_type = TREE_TYPE (exp);
tree index_expr = SWITCH_COND (exp);
tree index_type = TREE_TYPE (index_expr);
int unsignedp = TYPE_UNSIGNED (index_type);
/* The insn after which the case dispatch should finally
be emitted. Zero for a dummy. */
rtx start;
/* A list of case labels; it is first built as a list and it may then
be rearranged into a nearly balanced binary tree. */
struct case_node *case_list = 0;
/* Label to jump to if no case matches. */
tree default_label_decl = NULL_TREE;
alloc_pool case_node_pool = create_alloc_pool ("struct case_node pool",
sizeof (struct case_node),
100);
/* The switch body is lowered in gimplify.c, we should never have
switches with a non-NULL SWITCH_BODY here. */
gcc_assert (!SWITCH_BODY (exp));
gcc_assert (SWITCH_LABELS (exp));
do_pending_stack_adjust ();
/* An ERROR_MARK occurs for various reasons including invalid data type. */
if (index_type != error_mark_node)
{
tree elt;
bitmap label_bitmap;
int vl = TREE_VEC_LENGTH (vec);
/* cleanup_tree_cfg removes all SWITCH_EXPR with their index
expressions being INTEGER_CST. */
gcc_assert (TREE_CODE (index_expr) != INTEGER_CST);
/* The default case, if ever taken, is at the end of TREE_VEC. */
elt = TREE_VEC_ELT (vec, vl - 1);
if (!CASE_LOW (elt) && !CASE_HIGH (elt))
{
default_label_decl = CASE_LABEL (elt);
--vl;
}
for (i = vl - 1; i >= 0; --i)
{
tree low, high;
elt = TREE_VEC_ELT (vec, i);
low = CASE_LOW (elt);
gcc_assert (low);
high = CASE_HIGH (elt);
/* Discard empty ranges. */
if (high && tree_int_cst_lt (high, low))
continue;
case_list = add_case_node (case_list, index_type, low, high,
CASE_LABEL (elt), case_node_pool);
}
before_case = start = get_last_insn ();
if (default_label_decl)
default_label = label_rtx (default_label_decl);
/* Get upper and lower bounds of case values. */
uniq = 0;
count = 0;
label_bitmap = BITMAP_ALLOC (NULL);
for (n = case_list; n; n = n->right)
{
/* Count the elements and track the largest and smallest
of them (treating them as signed even if they are not). */
if (count++ == 0)
{
minval = n->low;
maxval = n->high;
}
else
{
if (tree_int_cst_lt (n->low, minval))
minval = n->low;
if (tree_int_cst_lt (maxval, n->high))
maxval = n->high;
}
/* A range counts double, since it requires two compares. */
if (! tree_int_cst_equal (n->low, n->high))
count++;
/* If we have not seen this label yet, then increase the
number of unique case node targets seen. */
lab = label_rtx (n->code_label);
if (!bitmap_bit_p (label_bitmap, CODE_LABEL_NUMBER (lab)))
{
bitmap_set_bit (label_bitmap, CODE_LABEL_NUMBER (lab));
uniq++;
}
}
BITMAP_FREE (label_bitmap);
/* cleanup_tree_cfg removes all SWITCH_EXPR with a single
destination, such as one with a default case only. However,
it doesn't remove cases that are out of range for the switch
type, so we may still get a zero here. */
if (count == 0)
{
if (default_label)
emit_jump (default_label);
free_alloc_pool (case_node_pool);
return;
}
/* Compute span of values. */
range = fold_build2 (MINUS_EXPR, index_type, maxval, minval);
/* Try implementing this switch statement by a short sequence of
bit-wise comparisons. However, we let the binary-tree case
below handle constant index expressions. */
if (CASE_USE_BIT_TESTS
&& ! TREE_CONSTANT (index_expr)
&& compare_tree_int (range, GET_MODE_BITSIZE (word_mode)) < 0
&& compare_tree_int (range, 0) > 0
&& lshift_cheap_p ()
&& ((uniq == 1 && count >= 3)
|| (uniq == 2 && count >= 5)
|| (uniq == 3 && count >= 6)))
{
/* Optimize the case where all the case values fit in a
word without having to subtract MINVAL. In this case,
we can optimize away the subtraction. */
if (compare_tree_int (minval, 0) > 0
&& compare_tree_int (maxval, GET_MODE_BITSIZE (word_mode)) < 0)
{
minval = build_int_cst (index_type, 0);
range = maxval;
}
emit_case_bit_tests (index_type, index_expr, minval, range,
case_list, default_label);
}
/* If range of values is much bigger than number of values,
make a sequence of conditional branches instead of a dispatch.
If the switch-index is a constant, do it this way
because we can optimize it. */
else if (count < case_values_threshold ()
|| compare_tree_int (range,
(optimize_insn_for_size_p () ? 3 : 10) * count) > 0
/* RANGE may be signed, and really large ranges will show up
as negative numbers. */
|| compare_tree_int (range, 0) < 0
#ifndef ASM_OUTPUT_ADDR_DIFF_ELT
|| flag_pic
#endif
|| !flag_jump_tables
|| TREE_CONSTANT (index_expr)
/* If neither casesi or tablejump is available, we can
only go this way. */
|| (!HAVE_casesi && !HAVE_tablejump))
{
index = expand_normal (index_expr);
/* If the index is a short or char that we do not have
an insn to handle comparisons directly, convert it to
a full integer now, rather than letting each comparison
generate the conversion. */
if (GET_MODE_CLASS (GET_MODE (index)) == MODE_INT
&& ! have_insn_for (COMPARE, GET_MODE (index)))
{
enum machine_mode wider_mode;
for (wider_mode = GET_MODE (index); wider_mode != VOIDmode;
wider_mode = GET_MODE_WIDER_MODE (wider_mode))
if (have_insn_for (COMPARE, wider_mode))
{
index = convert_to_mode (wider_mode, index, unsignedp);
break;
}
}
do_pending_stack_adjust ();
if (MEM_P (index))
index = copy_to_reg (index);
/* We generate a binary decision tree to select the
appropriate target code. This is done as follows:
The list of cases is rearranged into a binary tree,
nearly optimal assuming equal probability for each case.
The tree is transformed into RTL, eliminating
redundant test conditions at the same time.
If program flow could reach the end of the
decision tree an unconditional jump to the
default code is emitted. */
use_cost_table
= (TREE_CODE (orig_type) != ENUMERAL_TYPE
&& estimate_case_costs (case_list));
balance_case_nodes (&case_list, NULL);
emit_case_nodes (index, case_list, default_label, index_type);
if (default_label)
emit_jump (default_label);
}
else
{
rtx fallback_label = label_rtx (case_list->code_label);
table_label = gen_label_rtx ();
if (! try_casesi (index_type, index_expr, minval, range,
table_label, default_label, fallback_label))
{
bool ok;
/* Index jumptables from zero for suitable values of
minval to avoid a subtraction. */
if (optimize_insn_for_speed_p ()
&& compare_tree_int (minval, 0) > 0
&& compare_tree_int (minval, 3) < 0)
{
minval = build_int_cst (index_type, 0);
range = maxval;
}
ok = try_tablejump (index_type, index_expr, minval, range,
table_label, default_label);
gcc_assert (ok);
}
/* Get table of labels to jump to, in order of case index. */
ncases = tree_low_cst (range, 0) + 1;
labelvec = XALLOCAVEC (rtx, ncases);
memset (labelvec, 0, ncases * sizeof (rtx));
for (n = case_list; n; n = n->right)
{
/* Compute the low and high bounds relative to the minimum
value since that should fit in a HOST_WIDE_INT while the
actual values may not. */
HOST_WIDE_INT i_low
= tree_low_cst (fold_build2 (MINUS_EXPR, index_type,
n->low, minval), 1);
HOST_WIDE_INT i_high
= tree_low_cst (fold_build2 (MINUS_EXPR, index_type,
n->high, minval), 1);
HOST_WIDE_INT i;
for (i = i_low; i <= i_high; i ++)
labelvec[i]
= gen_rtx_LABEL_REF (Pmode, label_rtx (n->code_label));
}
/* Fill in the gaps with the default. We may have gaps at
the beginning if we tried to avoid the minval subtraction,
so substitute some label even if the default label was
deemed unreachable. */
if (!default_label)
default_label = fallback_label;
for (i = 0; i < ncases; i++)
if (labelvec[i] == 0)
labelvec[i] = gen_rtx_LABEL_REF (Pmode, default_label);
/* Output the table. */
emit_label (table_label);
if (CASE_VECTOR_PC_RELATIVE || flag_pic)
emit_jump_insn (gen_rtx_ADDR_DIFF_VEC (CASE_VECTOR_MODE,
gen_rtx_LABEL_REF (Pmode, table_label),
gen_rtvec_v (ncases, labelvec),
const0_rtx, const0_rtx));
else
emit_jump_insn (gen_rtx_ADDR_VEC (CASE_VECTOR_MODE,
gen_rtvec_v (ncases, labelvec)));
/* Record no drop-through after the table. */
emit_barrier ();
}
before_case = NEXT_INSN (before_case);
end = get_last_insn ();
reorder_insns (before_case, end, start);
}
free_temp_slots ();
free_alloc_pool (case_node_pool);
}
/* Generate code to jump to LABEL if OP0 and OP1 are equal in mode MODE. */
static void
do_jump_if_equal (enum machine_mode mode, rtx op0, rtx op1, rtx label,
int unsignedp)
{
do_compare_rtx_and_jump (op0, op1, EQ, unsignedp, mode,
NULL_RTX, NULL_RTX, label);
}
/* Not all case values are encountered equally. This function
uses a heuristic to weight case labels, in cases where that
looks like a reasonable thing to do.
Right now, all we try to guess is text, and we establish the
following weights:
chars above space: 16
digits: 16
default: 12
space, punct: 8
tab: 4
newline: 2
other "\" chars: 1
remaining chars: 0
If we find any cases in the switch that are not either -1 or in the range
of valid ASCII characters, or are control characters other than those
commonly used with "\", don't treat this switch scanning text.
Return 1 if these nodes are suitable for cost estimation, otherwise
return 0. */
static int
estimate_case_costs (case_node_ptr node)
{
tree min_ascii = integer_minus_one_node;
tree max_ascii = build_int_cst (TREE_TYPE (node->high), 127);
case_node_ptr n;
int i;
/* If we haven't already made the cost table, make it now. Note that the
lower bound of the table is -1, not zero. */
if (! cost_table_initialized)
{
cost_table_initialized = 1;
for (i = 0; i < 128; i++)
{
if (ISALNUM (i))
COST_TABLE (i) = 16;
else if (ISPUNCT (i))
COST_TABLE (i) = 8;
else if (ISCNTRL (i))
COST_TABLE (i) = -1;
}
COST_TABLE (' ') = 8;
COST_TABLE ('\t') = 4;
COST_TABLE ('\0') = 4;
COST_TABLE ('\n') = 2;
COST_TABLE ('\f') = 1;
COST_TABLE ('\v') = 1;
COST_TABLE ('\b') = 1;
}
/* See if all the case expressions look like text. It is text if the
constant is >= -1 and the highest constant is <= 127. Do all comparisons
as signed arithmetic since we don't want to ever access cost_table with a
value less than -1. Also check that none of the constants in a range
are strange control characters. */
for (n = node; n; n = n->right)
{
if (tree_int_cst_lt (n->low, min_ascii)
|| tree_int_cst_lt (max_ascii, n->high))
return 0;
for (i = (HOST_WIDE_INT) TREE_INT_CST_LOW (n->low);
i <= (HOST_WIDE_INT) TREE_INT_CST_LOW (n->high); i++)
if (COST_TABLE (i) < 0)
return 0;
}
/* All interesting values are within the range of interesting
ASCII characters. */
return 1;
}
/* Take an ordered list of case nodes
and transform them into a near optimal binary tree,
on the assumption that any target code selection value is as
likely as any other.
The transformation is performed by splitting the ordered
list into two equal sections plus a pivot. The parts are
then attached to the pivot as left and right branches. Each
branch is then transformed recursively. */
static void
balance_case_nodes (case_node_ptr *head, case_node_ptr parent)
{
case_node_ptr np;
np = *head;
if (np)
{
int cost = 0;
int i = 0;
int ranges = 0;
case_node_ptr *npp;
case_node_ptr left;
/* Count the number of entries on branch. Also count the ranges. */
while (np)
{
if (!tree_int_cst_equal (np->low, np->high))
{
ranges++;
if (use_cost_table)
cost += COST_TABLE (TREE_INT_CST_LOW (np->high));
}
if (use_cost_table)
cost += COST_TABLE (TREE_INT_CST_LOW (np->low));
i++;
np = np->right;
}
if (i > 2)
{
/* Split this list if it is long enough for that to help. */
npp = head;
left = *npp;
if (use_cost_table)
{
/* Find the place in the list that bisects the list's total cost,
Here I gets half the total cost. */
int n_moved = 0;
i = (cost + 1) / 2;
while (1)
{
/* Skip nodes while their cost does not reach that amount. */
if (!tree_int_cst_equal ((*npp)->low, (*npp)->high))
i -= COST_TABLE (TREE_INT_CST_LOW ((*npp)->high));
i -= COST_TABLE (TREE_INT_CST_LOW ((*npp)->low));
if (i <= 0)
break;
npp = &(*npp)->right;
n_moved += 1;
}
if (n_moved == 0)
{
/* Leave this branch lopsided, but optimize left-hand
side and fill in `parent' fields for right-hand side. */
np = *head;
np->parent = parent;
balance_case_nodes (&np->left, np);
for (; np->right; np = np->right)
np->right->parent = np;
return;
}
}
/* If there are just three nodes, split at the middle one. */
else if (i == 3)
npp = &(*npp)->right;
else
{
/* Find the place in the list that bisects the list's total cost,
where ranges count as 2.
Here I gets half the total cost. */
i = (i + ranges + 1) / 2;
while (1)
{
/* Skip nodes while their cost does not reach that amount. */
if (!tree_int_cst_equal ((*npp)->low, (*npp)->high))
i--;
i--;
if (i <= 0)
break;
npp = &(*npp)->right;
}
}
*head = np = *npp;
*npp = 0;
np->parent = parent;
np->left = left;
/* Optimize each of the two split parts. */
balance_case_nodes (&np->left, np);
balance_case_nodes (&np->right, np);
}
else
{
/* Else leave this branch as one level,
but fill in `parent' fields. */
np = *head;
np->parent = parent;
for (; np->right; np = np->right)
np->right->parent = np;
}
}
}
/* Search the parent sections of the case node tree
to see if a test for the lower bound of NODE would be redundant.
INDEX_TYPE is the type of the index expression.
The instructions to generate the case decision tree are
output in the same order as nodes are processed so it is
known that if a parent node checks the range of the current
node minus one that the current node is bounded at its lower
span. Thus the test would be redundant. */
static int
node_has_low_bound (case_node_ptr node, tree index_type)
{
tree low_minus_one;
case_node_ptr pnode;
/* If the lower bound of this node is the lowest value in the index type,
we need not test it. */
if (tree_int_cst_equal (node->low, TYPE_MIN_VALUE (index_type)))
return 1;
/* If this node has a left branch, the value at the left must be less
than that at this node, so it cannot be bounded at the bottom and
we need not bother testing any further. */
if (node->left)
return 0;
low_minus_one = fold_build2 (MINUS_EXPR, TREE_TYPE (node->low),
node->low,
build_int_cst (TREE_TYPE (node->low), 1));
/* If the subtraction above overflowed, we can't verify anything.
Otherwise, look for a parent that tests our value - 1. */
if (! tree_int_cst_lt (low_minus_one, node->low))
return 0;
for (pnode = node->parent; pnode; pnode = pnode->parent)
if (tree_int_cst_equal (low_minus_one, pnode->high))
return 1;
return 0;
}
/* Search the parent sections of the case node tree
to see if a test for the upper bound of NODE would be redundant.
INDEX_TYPE is the type of the index expression.
The instructions to generate the case decision tree are
output in the same order as nodes are processed so it is
known that if a parent node checks the range of the current
node plus one that the current node is bounded at its upper
span. Thus the test would be redundant. */
static int
node_has_high_bound (case_node_ptr node, tree index_type)
{
tree high_plus_one;
case_node_ptr pnode;
/* If there is no upper bound, obviously no test is needed. */
if (TYPE_MAX_VALUE (index_type) == NULL)
return 1;
/* If the upper bound of this node is the highest value in the type
of the index expression, we need not test against it. */
if (tree_int_cst_equal (node->high, TYPE_MAX_VALUE (index_type)))
return 1;
/* If this node has a right branch, the value at the right must be greater
than that at this node, so it cannot be bounded at the top and
we need not bother testing any further. */
if (node->right)
return 0;
high_plus_one = fold_build2 (PLUS_EXPR, TREE_TYPE (node->high),
node->high,
build_int_cst (TREE_TYPE (node->high), 1));
/* If the addition above overflowed, we can't verify anything.
Otherwise, look for a parent that tests our value + 1. */
if (! tree_int_cst_lt (node->high, high_plus_one))
return 0;
for (pnode = node->parent; pnode; pnode = pnode->parent)
if (tree_int_cst_equal (high_plus_one, pnode->low))
return 1;
return 0;
}
/* Search the parent sections of the
case node tree to see if both tests for the upper and lower
bounds of NODE would be redundant. */
static int
node_is_bounded (case_node_ptr node, tree index_type)
{
return (node_has_low_bound (node, index_type)
&& node_has_high_bound (node, index_type));
}
/* Emit step-by-step code to select a case for the value of INDEX.
The thus generated decision tree follows the form of the
case-node binary tree NODE, whose nodes represent test conditions.
INDEX_TYPE is the type of the index of the switch.
Care is taken to prune redundant tests from the decision tree
by detecting any boundary conditions already checked by
emitted rtx. (See node_has_high_bound, node_has_low_bound
and node_is_bounded, above.)
Where the test conditions can be shown to be redundant we emit
an unconditional jump to the target code. As a further
optimization, the subordinates of a tree node are examined to
check for bounded nodes. In this case conditional and/or
unconditional jumps as a result of the boundary check for the
current node are arranged to target the subordinates associated
code for out of bound conditions on the current node.
We can assume that when control reaches the code generated here,
the index value has already been compared with the parents
of this node, and determined to be on the same side of each parent
as this node is. Thus, if this node tests for the value 51,
and a parent tested for 52, we don't need to consider
the possibility of a value greater than 51. If another parent
tests for the value 50, then this node need not test anything. */
static void
emit_case_nodes (rtx index, case_node_ptr node, rtx default_label,
tree index_type)
{
/* If INDEX has an unsigned type, we must make unsigned branches. */
int unsignedp = TYPE_UNSIGNED (index_type);
enum machine_mode mode = GET_MODE (index);
enum machine_mode imode = TYPE_MODE (index_type);
/* Handle indices detected as constant during RTL expansion. */
if (mode == VOIDmode)
mode = imode;
/* See if our parents have already tested everything for us.
If they have, emit an unconditional jump for this node. */
if (node_is_bounded (node, index_type))
emit_jump (label_rtx (node->code_label));
else if (tree_int_cst_equal (node->low, node->high))
{
/* Node is single valued. First see if the index expression matches
this node and then check our children, if any. */
do_jump_if_equal (mode, index,
convert_modes (mode, imode,
expand_normal (node->low),
unsignedp),
label_rtx (node->code_label), unsignedp);
if (node->right != 0 && node->left != 0)
{
/* This node has children on both sides.
Dispatch to one side or the other
by comparing the index value with this node's value.
If one subtree is bounded, check that one first,
so we can avoid real branches in the tree. */
if (node_is_bounded (node->right, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
label_rtx (node->right->code_label));
emit_case_nodes (index, node->left, default_label, index_type);
}
else if (node_is_bounded (node->left, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
LT, NULL_RTX, mode, unsignedp,
label_rtx (node->left->code_label));
emit_case_nodes (index, node->right, default_label, index_type);
}
/* If both children are single-valued cases with no
children, finish up all the work. This way, we can save
one ordered comparison. */
else if (tree_int_cst_equal (node->right->low, node->right->high)
&& node->right->left == 0
&& node->right->right == 0
&& tree_int_cst_equal (node->left->low, node->left->high)
&& node->left->left == 0
&& node->left->right == 0)
{
/* Neither node is bounded. First distinguish the two sides;
then emit the code for one side at a time. */
/* See if the value matches what the right hand side
wants. */
do_jump_if_equal (mode, index,
convert_modes (mode, imode,
expand_normal (node->right->low),
unsignedp),
label_rtx (node->right->code_label),
unsignedp);
/* See if the value matches what the left hand side
wants. */
do_jump_if_equal (mode, index,
convert_modes (mode, imode,
expand_normal (node->left->low),
unsignedp),
label_rtx (node->left->code_label),
unsignedp);
}
else
{
/* Neither node is bounded. First distinguish the two sides;
then emit the code for one side at a time. */
tree test_label = build_decl (LABEL_DECL, NULL_TREE, NULL_TREE);
/* See if the value is on the right. */
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
label_rtx (test_label));
/* Value must be on the left.
Handle the left-hand subtree. */
emit_case_nodes (index, node->left, default_label, index_type);
/* If left-hand subtree does nothing,
go to default. */
if (default_label)
emit_jump (default_label);
/* Code branches here for the right-hand subtree. */
expand_label (test_label);
emit_case_nodes (index, node->right, default_label, index_type);
}
}
else if (node->right != 0 && node->left == 0)
{
/* Here we have a right child but no left so we issue a conditional
branch to default and process the right child.
Omit the conditional branch to default if the right child
does not have any children and is single valued; it would
cost too much space to save so little time. */
if (node->right->right || node->right->left
|| !tree_int_cst_equal (node->right->low, node->right->high))
{
if (!node_has_low_bound (node, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
LT, NULL_RTX, mode, unsignedp,
default_label);
}
emit_case_nodes (index, node->right, default_label, index_type);
}
else
/* We cannot process node->right normally
since we haven't ruled out the numbers less than
this node's value. So handle node->right explicitly. */
do_jump_if_equal (mode, index,
convert_modes
(mode, imode,
expand_normal (node->right->low),
unsignedp),
label_rtx (node->right->code_label), unsignedp);
}
else if (node->right == 0 && node->left != 0)
{
/* Just one subtree, on the left. */
if (node->left->left || node->left->right
|| !tree_int_cst_equal (node->left->low, node->left->high))
{
if (!node_has_high_bound (node, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
default_label);
}
emit_case_nodes (index, node->left, default_label, index_type);
}
else
/* We cannot process node->left normally
since we haven't ruled out the numbers less than
this node's value. So handle node->left explicitly. */
do_jump_if_equal (mode, index,
convert_modes
(mode, imode,
expand_normal (node->left->low),
unsignedp),
label_rtx (node->left->code_label), unsignedp);
}
}
else
{
/* Node is a range. These cases are very similar to those for a single
value, except that we do not start by testing whether this node
is the one to branch to. */
if (node->right != 0 && node->left != 0)
{
/* Node has subtrees on both sides.
If the right-hand subtree is bounded,
test for it first, since we can go straight there.
Otherwise, we need to make a branch in the control structure,
then handle the two subtrees. */
tree test_label = 0;
if (node_is_bounded (node->right, index_type))
/* Right hand node is fully bounded so we can eliminate any
testing and branch directly to the target code. */
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
label_rtx (node->right->code_label));
else
{
/* Right hand node requires testing.
Branch to a label where we will handle it later. */
test_label = build_decl (LABEL_DECL, NULL_TREE, NULL_TREE);
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
label_rtx (test_label));
}
/* Value belongs to this node or to the left-hand subtree. */
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->low),
unsignedp),
GE, NULL_RTX, mode, unsignedp,
label_rtx (node->code_label));
/* Handle the left-hand subtree. */
emit_case_nodes (index, node->left, default_label, index_type);
/* If right node had to be handled later, do that now. */
if (test_label)
{
/* If the left-hand subtree fell through,
don't let it fall into the right-hand subtree. */
if (default_label)
emit_jump (default_label);
expand_label (test_label);
emit_case_nodes (index, node->right, default_label, index_type);
}
}
else if (node->right != 0 && node->left == 0)
{
/* Deal with values to the left of this node,
if they are possible. */
if (!node_has_low_bound (node, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->low),
unsignedp),
LT, NULL_RTX, mode, unsignedp,
default_label);
}
/* Value belongs to this node or to the right-hand subtree. */
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
LE, NULL_RTX, mode, unsignedp,
label_rtx (node->code_label));
emit_case_nodes (index, node->right, default_label, index_type);
}
else if (node->right == 0 && node->left != 0)
{
/* Deal with values to the right of this node,
if they are possible. */
if (!node_has_high_bound (node, index_type))
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
default_label);
}
/* Value belongs to this node or to the left-hand subtree. */
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->low),
unsignedp),
GE, NULL_RTX, mode, unsignedp,
label_rtx (node->code_label));
emit_case_nodes (index, node->left, default_label, index_type);
}
else
{
/* Node has no children so we check low and high bounds to remove
redundant tests. Only one of the bounds can exist,
since otherwise this node is bounded--a case tested already. */
int high_bound = node_has_high_bound (node, index_type);
int low_bound = node_has_low_bound (node, index_type);
if (!high_bound && low_bound)
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->high),
unsignedp),
GT, NULL_RTX, mode, unsignedp,
default_label);
}
else if (!low_bound && high_bound)
{
emit_cmp_and_jump_insns (index,
convert_modes
(mode, imode,
expand_normal (node->low),
unsignedp),
LT, NULL_RTX, mode, unsignedp,
default_label);
}
else if (!low_bound && !high_bound)
{
/* Widen LOW and HIGH to the same width as INDEX. */
tree type = lang_hooks.types.type_for_mode (mode, unsignedp);
tree low = build1 (CONVERT_EXPR, type, node->low);
tree high = build1 (CONVERT_EXPR, type, node->high);
rtx low_rtx, new_index, new_bound;
/* Instead of doing two branches, emit one unsigned branch for
(index-low) > (high-low). */
low_rtx = expand_expr (low, NULL_RTX, mode, EXPAND_NORMAL);
new_index = expand_simple_binop (mode, MINUS, index, low_rtx,
NULL_RTX, unsignedp,
OPTAB_WIDEN);
new_bound = expand_expr (fold_build2 (MINUS_EXPR, type,
high, low),
NULL_RTX, mode, EXPAND_NORMAL);
emit_cmp_and_jump_insns (new_index, new_bound, GT, NULL_RTX,
mode, 1, default_label);
}
emit_jump (label_rtx (node->code_label));
}
}
}