From f378ebf14df0952eae870c9865bab8326aa8f137 Mon Sep 17 00:00:00 2001 From: Dan Albert Date: Wed, 17 Jun 2015 11:09:54 -0700 Subject: Delete old versions of GCC. Change-Id: I710f125d905290e1024cbd67f48299861790c66c --- gcc-4.4.3/gcc/caller-save.c | 1294 ------------------------------------------- 1 file changed, 1294 deletions(-) delete mode 100644 gcc-4.4.3/gcc/caller-save.c (limited to 'gcc-4.4.3/gcc/caller-save.c') diff --git a/gcc-4.4.3/gcc/caller-save.c b/gcc-4.4.3/gcc/caller-save.c deleted file mode 100644 index 92e03f0c8..000000000 --- a/gcc-4.4.3/gcc/caller-save.c +++ /dev/null @@ -1,1294 +0,0 @@ -/* Save and restore call-clobbered registers which are live across a call. - Copyright (C) 1989, 1992, 1994, 1995, 1997, 1998, 1999, 2000, - 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 - Free Software Foundation, Inc. - -This file is part of GCC. - -GCC is free software; you can redistribute it and/or modify it under -the terms of the GNU General Public License as published by the Free -Software Foundation; either version 3, or (at your option) any later -version. - -GCC is distributed in the hope that it will be useful, but WITHOUT ANY -WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -for more details. - -You should have received a copy of the GNU General Public License -along with GCC; see the file COPYING3. If not see -. */ - -#include "config.h" -#include "system.h" -#include "coretypes.h" -#include "tm.h" -#include "rtl.h" -#include "regs.h" -#include "insn-config.h" -#include "flags.h" -#include "hard-reg-set.h" -#include "recog.h" -#include "basic-block.h" -#include "reload.h" -#include "function.h" -#include "expr.h" -#include "toplev.h" -#include "tm_p.h" -#include "addresses.h" -#include "output.h" -#include "df.h" -#include "ggc.h" - -/* Call used hard registers which can not be saved because there is no - insn for this. */ -HARD_REG_SET no_caller_save_reg_set; - -#ifndef MAX_MOVE_MAX -#define MAX_MOVE_MAX MOVE_MAX -#endif - -#ifndef MIN_UNITS_PER_WORD -#define MIN_UNITS_PER_WORD UNITS_PER_WORD -#endif - -#define MOVE_MAX_WORDS (MOVE_MAX / UNITS_PER_WORD) - -/* Modes for each hard register that we can save. The smallest mode is wide - enough to save the entire contents of the register. When saving the - register because it is live we first try to save in multi-register modes. - If that is not possible the save is done one register at a time. */ - -static enum machine_mode - regno_save_mode[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1]; - -/* For each hard register, a place on the stack where it can be saved, - if needed. */ - -static rtx - regno_save_mem[FIRST_PSEUDO_REGISTER][MAX_MOVE_MAX / MIN_UNITS_PER_WORD + 1]; - -/* The number of elements in the subsequent array. */ -static int save_slots_num; - -/* Allocated slots so far. */ -static rtx save_slots[FIRST_PSEUDO_REGISTER]; - -/* We will only make a register eligible for caller-save if it can be - saved in its widest mode with a simple SET insn as long as the memory - address is valid. We record the INSN_CODE is those insns here since - when we emit them, the addresses might not be valid, so they might not - be recognized. */ - -static int - cached_reg_save_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE]; -static int - cached_reg_restore_code[FIRST_PSEUDO_REGISTER][MAX_MACHINE_MODE]; - -/* Set of hard regs currently residing in save area (during insn scan). */ - -static HARD_REG_SET hard_regs_saved; - -/* Number of registers currently in hard_regs_saved. */ - -static int n_regs_saved; - -/* Computed by mark_referenced_regs, all regs referenced in a given - insn. */ -static HARD_REG_SET referenced_regs; - - -static int reg_save_code (int, enum machine_mode); -static int reg_restore_code (int, enum machine_mode); - -struct saved_hard_reg; -static void initiate_saved_hard_regs (void); -static struct saved_hard_reg *new_saved_hard_reg (int, int); -static void finish_saved_hard_regs (void); -static int saved_hard_reg_compare_func (const void *, const void *); - -static void mark_set_regs (rtx, const_rtx, void *); -static void add_stored_regs (rtx, const_rtx, void *); -static void mark_referenced_regs (rtx); -static int insert_save (struct insn_chain *, int, int, HARD_REG_SET *, - enum machine_mode *); -static int insert_restore (struct insn_chain *, int, int, int, - enum machine_mode *); -static struct insn_chain *insert_one_insn (struct insn_chain *, int, int, - rtx); -static void add_stored_regs (rtx, const_rtx, void *); - - - -static GTY(()) rtx savepat; -static GTY(()) rtx restpat; -static GTY(()) rtx test_reg; -static GTY(()) rtx test_mem; -static GTY(()) rtx saveinsn; -static GTY(()) rtx restinsn; - -/* Return the INSN_CODE used to save register REG in mode MODE. */ -static int -reg_save_code (int reg, enum machine_mode mode) -{ - bool ok; - if (cached_reg_save_code[reg][mode]) - return cached_reg_save_code[reg][mode]; - if (!HARD_REGNO_MODE_OK (reg, mode)) - { - cached_reg_save_code[reg][mode] = -1; - cached_reg_restore_code[reg][mode] = -1; - return -1; - } - - /* Update the register number and modes of the register - and memory operand. */ - SET_REGNO_RAW (test_reg, reg); - PUT_MODE (test_reg, mode); - PUT_MODE (test_mem, mode); - - /* Force re-recognition of the modified insns. */ - INSN_CODE (saveinsn) = -1; - INSN_CODE (restinsn) = -1; - - cached_reg_save_code[reg][mode] = recog_memoized (saveinsn); - cached_reg_restore_code[reg][mode] = recog_memoized (restinsn); - - /* Now extract both insns and see if we can meet their - constraints. */ - ok = (cached_reg_save_code[reg][mode] != -1 - && cached_reg_restore_code[reg][mode] != -1); - if (ok) - { - extract_insn (saveinsn); - ok = constrain_operands (1); - extract_insn (restinsn); - ok &= constrain_operands (1); - } - - if (! ok) - { - cached_reg_save_code[reg][mode] = -1; - cached_reg_restore_code[reg][mode] = -1; - } - gcc_assert (cached_reg_save_code[reg][mode]); - return cached_reg_save_code[reg][mode]; -} - -/* Return the INSN_CODE used to restore register REG in mode MODE. */ -static int -reg_restore_code (int reg, enum machine_mode mode) -{ - if (cached_reg_restore_code[reg][mode]) - return cached_reg_restore_code[reg][mode]; - /* Populate our cache. */ - reg_save_code (reg, mode); - return cached_reg_restore_code[reg][mode]; -} - -/* Initialize for caller-save. - - Look at all the hard registers that are used by a call and for which - reginfo.c has not already excluded from being used across a call. - - Ensure that we can find a mode to save the register and that there is a - simple insn to save and restore the register. This latter check avoids - problems that would occur if we tried to save the MQ register of some - machines directly into memory. */ - -void -init_caller_save (void) -{ - rtx addr_reg; - int offset; - rtx address; - int i, j; - - CLEAR_HARD_REG_SET (no_caller_save_reg_set); - /* First find all the registers that we need to deal with and all - the modes that they can have. If we can't find a mode to use, - we can't have the register live over calls. */ - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - { - if (call_used_regs[i] && ! call_fixed_regs[i]) - { - for (j = 1; j <= MOVE_MAX_WORDS; j++) - { - regno_save_mode[i][j] = HARD_REGNO_CALLER_SAVE_MODE (i, j, - VOIDmode); - if (regno_save_mode[i][j] == VOIDmode && j == 1) - { - call_fixed_regs[i] = 1; - SET_HARD_REG_BIT (call_fixed_reg_set, i); - } - } - } - else - regno_save_mode[i][1] = VOIDmode; - } - - /* The following code tries to approximate the conditions under which - we can easily save and restore a register without scratch registers or - other complexities. It will usually work, except under conditions where - the validity of an insn operand is dependent on the address offset. - No such cases are currently known. - - We first find a typical offset from some BASE_REG_CLASS register. - This address is chosen by finding the first register in the class - and by finding the smallest power of two that is a valid offset from - that register in every mode we will use to save registers. */ - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - if (TEST_HARD_REG_BIT - (reg_class_contents - [(int) base_reg_class (regno_save_mode[i][1], PLUS, CONST_INT)], i)) - break; - - gcc_assert (i < FIRST_PSEUDO_REGISTER); - - addr_reg = gen_rtx_REG (Pmode, i); - - for (offset = 1 << (HOST_BITS_PER_INT / 2); offset; offset >>= 1) - { - address = gen_rtx_PLUS (Pmode, addr_reg, GEN_INT (offset)); - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - if (regno_save_mode[i][1] != VOIDmode - && ! strict_memory_address_p (regno_save_mode[i][1], address)) - break; - - if (i == FIRST_PSEUDO_REGISTER) - break; - } - - /* If we didn't find a valid address, we must use register indirect. */ - if (offset == 0) - address = addr_reg; - - /* Next we try to form an insn to save and restore the register. We - see if such an insn is recognized and meets its constraints. - - To avoid lots of unnecessary RTL allocation, we construct all the RTL - once, then modify the memory and register operands in-place. */ - - test_reg = gen_rtx_REG (VOIDmode, 0); - test_mem = gen_rtx_MEM (VOIDmode, address); - savepat = gen_rtx_SET (VOIDmode, test_mem, test_reg); - restpat = gen_rtx_SET (VOIDmode, test_reg, test_mem); - - saveinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, savepat, -1, 0); - restinsn = gen_rtx_INSN (VOIDmode, 0, 0, 0, 0, 0, restpat, -1, 0); - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - for (j = 1; j <= MOVE_MAX_WORDS; j++) - if (reg_save_code (i,regno_save_mode[i][j]) == -1) - { - regno_save_mode[i][j] = VOIDmode; - if (j == 1) - { - call_fixed_regs[i] = 1; - SET_HARD_REG_BIT (call_fixed_reg_set, i); - if (call_used_regs[i]) - SET_HARD_REG_BIT (no_caller_save_reg_set, i); - } - } -} - - - -/* Initialize save areas by showing that we haven't allocated any yet. */ - -void -init_save_areas (void) -{ - int i, j; - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - for (j = 1; j <= MOVE_MAX_WORDS; j++) - regno_save_mem[i][j] = 0; - save_slots_num = 0; - -} - -/* The structure represents a hard register which should be saved - through the call. It is used when the integrated register - allocator (IRA) is used and sharing save slots is on. */ -struct saved_hard_reg -{ - /* Order number starting with 0. */ - int num; - /* The hard regno. */ - int hard_regno; - /* Execution frequency of all calls through which given hard - register should be saved. */ - int call_freq; - /* Stack slot reserved to save the hard register through calls. */ - rtx slot; - /* True if it is first hard register in the chain of hard registers - sharing the same stack slot. */ - int first_p; - /* Order number of the next hard register structure with the same - slot in the chain. -1 represents end of the chain. */ - int next; -}; - -/* Map: hard register number to the corresponding structure. */ -static struct saved_hard_reg *hard_reg_map[FIRST_PSEUDO_REGISTER]; - -/* The number of all structures representing hard registers should be - saved, in order words, the number of used elements in the following - array. */ -static int saved_regs_num; - -/* Pointers to all the structures. Index is the order number of the - corresponding structure. */ -static struct saved_hard_reg *all_saved_regs[FIRST_PSEUDO_REGISTER]; - -/* First called function for work with saved hard registers. */ -static void -initiate_saved_hard_regs (void) -{ - int i; - - saved_regs_num = 0; - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - hard_reg_map[i] = NULL; -} - -/* Allocate and return new saved hard register with given REGNO and - CALL_FREQ. */ -static struct saved_hard_reg * -new_saved_hard_reg (int regno, int call_freq) -{ - struct saved_hard_reg *saved_reg; - - saved_reg - = (struct saved_hard_reg *) xmalloc (sizeof (struct saved_hard_reg)); - hard_reg_map[regno] = all_saved_regs[saved_regs_num] = saved_reg; - saved_reg->num = saved_regs_num++; - saved_reg->hard_regno = regno; - saved_reg->call_freq = call_freq; - saved_reg->first_p = FALSE; - saved_reg->next = -1; - return saved_reg; -} - -/* Free memory allocated for the saved hard registers. */ -static void -finish_saved_hard_regs (void) -{ - int i; - - for (i = 0; i < saved_regs_num; i++) - free (all_saved_regs[i]); -} - -/* The function is used to sort the saved hard register structures - according their frequency. */ -static int -saved_hard_reg_compare_func (const void *v1p, const void *v2p) -{ - const struct saved_hard_reg *p1 = *(struct saved_hard_reg * const *) v1p; - const struct saved_hard_reg *p2 = *(struct saved_hard_reg * const *) v2p; - - if (flag_omit_frame_pointer) - { - if (p1->call_freq - p2->call_freq != 0) - return p1->call_freq - p2->call_freq; - } - else if (p2->call_freq - p1->call_freq != 0) - return p2->call_freq - p1->call_freq; - - return p1->num - p2->num; -} - -/* Allocate save areas for any hard registers that might need saving. - We take a conservative approach here and look for call-clobbered hard - registers that are assigned to pseudos that cross calls. This may - overestimate slightly (especially if some of these registers are later - used as spill registers), but it should not be significant. - - For IRA we use priority coloring to decrease stack slots needed for - saving hard registers through calls. We build conflicts for them - to do coloring. - - Future work: - - In the fallback case we should iterate backwards across all possible - modes for the save, choosing the largest available one instead of - falling back to the smallest mode immediately. (eg TF -> DF -> SF). - - We do not try to use "move multiple" instructions that exist - on some machines (such as the 68k moveml). It could be a win to try - and use them when possible. The hard part is doing it in a way that is - machine independent since they might be saving non-consecutive - registers. (imagine caller-saving d0,d1,a0,a1 on the 68k) */ - -void -setup_save_areas (void) -{ - int i, j, k; - unsigned int r; - HARD_REG_SET hard_regs_used; - - /* Allocate space in the save area for the largest multi-register - pseudos first, then work backwards to single register - pseudos. */ - - /* Find and record all call-used hard-registers in this function. */ - CLEAR_HARD_REG_SET (hard_regs_used); - for (i = FIRST_PSEUDO_REGISTER; i < max_regno; i++) - if (reg_renumber[i] >= 0 && REG_N_CALLS_CROSSED (i) > 0) - { - unsigned int regno = reg_renumber[i]; - unsigned int endregno - = end_hard_regno (GET_MODE (regno_reg_rtx[i]), regno); - for (r = regno; r < endregno; r++) - if (call_used_regs[r]) - SET_HARD_REG_BIT (hard_regs_used, r); - } - - if (optimize && flag_ira_share_save_slots) - { - rtx insn, slot; - struct insn_chain *chain, *next; - char *saved_reg_conflicts; - unsigned int regno; - int next_k, freq; - struct saved_hard_reg *saved_reg, *saved_reg2, *saved_reg3; - int call_saved_regs_num; - struct saved_hard_reg *call_saved_regs[FIRST_PSEUDO_REGISTER]; - HARD_REG_SET hard_regs_to_save, used_regs, this_insn_sets; - reg_set_iterator rsi; - int best_slot_num; - int prev_save_slots_num; - rtx prev_save_slots[FIRST_PSEUDO_REGISTER]; - - initiate_saved_hard_regs (); - /* Create hard reg saved regs. */ - for (chain = reload_insn_chain; chain != 0; chain = next) - { - insn = chain->insn; - next = chain->next; - if (GET_CODE (insn) != CALL_INSN - || find_reg_note (insn, REG_NORETURN, NULL)) - continue; - freq = REG_FREQ_FROM_BB (BLOCK_FOR_INSN (insn)); - REG_SET_TO_HARD_REG_SET (hard_regs_to_save, - &chain->live_throughout); - COPY_HARD_REG_SET (used_regs, call_used_reg_set); - - /* Record all registers set in this call insn. These don't - need to be saved. N.B. the call insn might set a subreg - of a multi-hard-reg pseudo; then the pseudo is considered - live during the call, but the subreg that is set - isn't. */ - CLEAR_HARD_REG_SET (this_insn_sets); - note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets); - /* Sibcalls are considered to set the return value. */ - if (SIBLING_CALL_P (insn) && crtl->return_rtx) - mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets); - - AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set); - AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets); - AND_HARD_REG_SET (hard_regs_to_save, used_regs); - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) - { - if (hard_reg_map[regno] != NULL) - hard_reg_map[regno]->call_freq += freq; - else - saved_reg = new_saved_hard_reg (regno, freq); - } - /* Look through all live pseudos, mark their hard registers. */ - EXECUTE_IF_SET_IN_REG_SET - (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi) - { - int r = reg_renumber[regno]; - int bound; - - if (r < 0) - continue; - - bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)]; - for (; r < bound; r++) - if (TEST_HARD_REG_BIT (used_regs, r)) - { - if (hard_reg_map[r] != NULL) - hard_reg_map[r]->call_freq += freq; - else - saved_reg = new_saved_hard_reg (r, freq); - SET_HARD_REG_BIT (hard_regs_to_save, r); - } - } - } - /* Find saved hard register conflicts. */ - saved_reg_conflicts = (char *) xmalloc (saved_regs_num * saved_regs_num); - memset (saved_reg_conflicts, 0, saved_regs_num * saved_regs_num); - for (chain = reload_insn_chain; chain != 0; chain = next) - { - call_saved_regs_num = 0; - insn = chain->insn; - next = chain->next; - if (GET_CODE (insn) != CALL_INSN - || find_reg_note (insn, REG_NORETURN, NULL)) - continue; - REG_SET_TO_HARD_REG_SET (hard_regs_to_save, - &chain->live_throughout); - COPY_HARD_REG_SET (used_regs, call_used_reg_set); - - /* Record all registers set in this call insn. These don't - need to be saved. N.B. the call insn might set a subreg - of a multi-hard-reg pseudo; then the pseudo is considered - live during the call, but the subreg that is set - isn't. */ - CLEAR_HARD_REG_SET (this_insn_sets); - note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets); - /* Sibcalls are considered to set the return value, - compare flow.c:propagate_one_insn. */ - if (SIBLING_CALL_P (insn) && crtl->return_rtx) - mark_set_regs (crtl->return_rtx, NULL_RTX, &this_insn_sets); - - AND_COMPL_HARD_REG_SET (used_regs, call_fixed_reg_set); - AND_COMPL_HARD_REG_SET (used_regs, this_insn_sets); - AND_HARD_REG_SET (hard_regs_to_save, used_regs); - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) - { - gcc_assert (hard_reg_map[regno] != NULL); - call_saved_regs[call_saved_regs_num++] = hard_reg_map[regno]; - } - /* Look through all live pseudos, mark their hard registers. */ - EXECUTE_IF_SET_IN_REG_SET - (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi) - { - int r = reg_renumber[regno]; - int bound; - - if (r < 0) - continue; - - bound = r + hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)]; - for (; r < bound; r++) - if (TEST_HARD_REG_BIT (used_regs, r)) - call_saved_regs[call_saved_regs_num++] = hard_reg_map[r]; - } - for (i = 0; i < call_saved_regs_num; i++) - { - saved_reg = call_saved_regs[i]; - for (j = 0; j < call_saved_regs_num; j++) - if (i != j) - { - saved_reg2 = call_saved_regs[j]; - saved_reg_conflicts[saved_reg->num * saved_regs_num - + saved_reg2->num] - = saved_reg_conflicts[saved_reg2->num * saved_regs_num - + saved_reg->num] - = TRUE; - } - } - } - /* Sort saved hard regs. */ - qsort (all_saved_regs, saved_regs_num, sizeof (struct saved_hard_reg *), - saved_hard_reg_compare_func); - /* Initiate slots available from the previous reload - iteration. */ - prev_save_slots_num = save_slots_num; - memcpy (prev_save_slots, save_slots, save_slots_num * sizeof (rtx)); - save_slots_num = 0; - /* Allocate stack slots for the saved hard registers. */ - for (i = 0; i < saved_regs_num; i++) - { - saved_reg = all_saved_regs[i]; - regno = saved_reg->hard_regno; - for (j = 0; j < i; j++) - { - saved_reg2 = all_saved_regs[j]; - if (! saved_reg2->first_p) - continue; - slot = saved_reg2->slot; - for (k = j; k >= 0; k = next_k) - { - saved_reg3 = all_saved_regs[k]; - next_k = saved_reg3->next; - if (saved_reg_conflicts[saved_reg->num * saved_regs_num - + saved_reg3->num]) - break; - } - if (k < 0 - && (GET_MODE_SIZE (regno_save_mode[regno][1]) - <= GET_MODE_SIZE (regno_save_mode - [saved_reg2->hard_regno][1]))) - { - saved_reg->slot - = adjust_address_nv - (slot, regno_save_mode[saved_reg->hard_regno][1], 0); - regno_save_mem[regno][1] = saved_reg->slot; - saved_reg->next = saved_reg2->next; - saved_reg2->next = i; - if (dump_file != NULL) - fprintf (dump_file, "%d uses slot of %d\n", - regno, saved_reg2->hard_regno); - break; - } - } - if (j == i) - { - saved_reg->first_p = TRUE; - for (best_slot_num = -1, j = 0; j < prev_save_slots_num; j++) - { - slot = prev_save_slots[j]; - if (slot == NULL_RTX) - continue; - if (GET_MODE_SIZE (regno_save_mode[regno][1]) - <= GET_MODE_SIZE (GET_MODE (slot)) - && best_slot_num < 0) - best_slot_num = j; - if (GET_MODE (slot) == regno_save_mode[regno][1]) - break; - } - if (best_slot_num >= 0) - { - saved_reg->slot = prev_save_slots[best_slot_num]; - saved_reg->slot - = adjust_address_nv - (saved_reg->slot, - regno_save_mode[saved_reg->hard_regno][1], 0); - if (dump_file != NULL) - fprintf (dump_file, - "%d uses a slot from prev iteration\n", regno); - prev_save_slots[best_slot_num] = NULL_RTX; - if (best_slot_num + 1 == prev_save_slots_num) - prev_save_slots_num--; - } - else - { - saved_reg->slot - = assign_stack_local_1 - (regno_save_mode[regno][1], - GET_MODE_SIZE (regno_save_mode[regno][1]), 0, true); - if (dump_file != NULL) - fprintf (dump_file, "%d uses a new slot\n", regno); - } - regno_save_mem[regno][1] = saved_reg->slot; - save_slots[save_slots_num++] = saved_reg->slot; - } - } - free (saved_reg_conflicts); - finish_saved_hard_regs (); - } - else - { - /* Now run through all the call-used hard-registers and allocate - space for them in the caller-save area. Try to allocate space - in a manner which allows multi-register saves/restores to be done. */ - - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - for (j = MOVE_MAX_WORDS; j > 0; j--) - { - int do_save = 1; - - /* If no mode exists for this size, try another. Also break out - if we have already saved this hard register. */ - if (regno_save_mode[i][j] == VOIDmode || regno_save_mem[i][1] != 0) - continue; - - /* See if any register in this group has been saved. */ - for (k = 0; k < j; k++) - if (regno_save_mem[i + k][1]) - { - do_save = 0; - break; - } - if (! do_save) - continue; - - for (k = 0; k < j; k++) - if (! TEST_HARD_REG_BIT (hard_regs_used, i + k)) - { - do_save = 0; - break; - } - if (! do_save) - continue; - - /* We have found an acceptable mode to store in. Since - hard register is always saved in the widest mode - available, the mode may be wider than necessary, it is - OK to reduce the alignment of spill space. We will - verify that it is equal to or greater than required - when we restore and save the hard register in - insert_restore and insert_save. */ - regno_save_mem[i][j] - = assign_stack_local_1 (regno_save_mode[i][j], - GET_MODE_SIZE (regno_save_mode[i][j]), - 0, true); - - /* Setup single word save area just in case... */ - for (k = 0; k < j; k++) - /* This should not depend on WORDS_BIG_ENDIAN. - The order of words in regs is the same as in memory. */ - regno_save_mem[i + k][1] - = adjust_address_nv (regno_save_mem[i][j], - regno_save_mode[i + k][1], - k * UNITS_PER_WORD); - } - } - - /* Now loop again and set the alias set of any save areas we made to - the alias set used to represent frame objects. */ - for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) - for (j = MOVE_MAX_WORDS; j > 0; j--) - if (regno_save_mem[i][j] != 0) - set_mem_alias_set (regno_save_mem[i][j], get_frame_alias_set ()); -} - - - -/* Find the places where hard regs are live across calls and save them. */ - -void -save_call_clobbered_regs (void) -{ - struct insn_chain *chain, *next; - enum machine_mode save_mode [FIRST_PSEUDO_REGISTER]; - - /* Computed in mark_set_regs, holds all registers set by the current - instruction. */ - HARD_REG_SET this_insn_sets; - - CLEAR_HARD_REG_SET (hard_regs_saved); - n_regs_saved = 0; - - for (chain = reload_insn_chain; chain != 0; chain = next) - { - rtx insn = chain->insn; - enum rtx_code code = GET_CODE (insn); - - next = chain->next; - - gcc_assert (!chain->is_caller_save_insn); - - if (INSN_P (insn)) - { - /* If some registers have been saved, see if INSN references - any of them. We must restore them before the insn if so. */ - - if (n_regs_saved) - { - int regno; - - if (code == JUMP_INSN) - /* Restore all registers if this is a JUMP_INSN. */ - COPY_HARD_REG_SET (referenced_regs, hard_regs_saved); - else - { - CLEAR_HARD_REG_SET (referenced_regs); - mark_referenced_regs (PATTERN (insn)); - AND_HARD_REG_SET (referenced_regs, hard_regs_saved); - } - - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (referenced_regs, regno)) - regno += insert_restore (chain, 1, regno, MOVE_MAX_WORDS, save_mode); - } - - if (code == CALL_INSN - && ! SIBLING_CALL_P (insn) - && ! find_reg_note (insn, REG_NORETURN, NULL)) - { - unsigned regno; - HARD_REG_SET hard_regs_to_save; - reg_set_iterator rsi; - - /* Use the register life information in CHAIN to compute which - regs are live during the call. */ - REG_SET_TO_HARD_REG_SET (hard_regs_to_save, - &chain->live_throughout); - /* Save hard registers always in the widest mode available. */ - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) - save_mode [regno] = regno_save_mode [regno][1]; - else - save_mode [regno] = VOIDmode; - - /* Look through all live pseudos, mark their hard registers - and choose proper mode for saving. */ - EXECUTE_IF_SET_IN_REG_SET - (&chain->live_throughout, FIRST_PSEUDO_REGISTER, regno, rsi) - { - int r = reg_renumber[regno]; - int nregs; - enum machine_mode mode; - - if (r < 0) - continue; - nregs = hard_regno_nregs[r][PSEUDO_REGNO_MODE (regno)]; - mode = HARD_REGNO_CALLER_SAVE_MODE - (r, nregs, PSEUDO_REGNO_MODE (regno)); - if (GET_MODE_BITSIZE (mode) - > GET_MODE_BITSIZE (save_mode[r])) - save_mode[r] = mode; - while (nregs-- > 0) - SET_HARD_REG_BIT (hard_regs_to_save, r + nregs); - } - - /* Record all registers set in this call insn. These don't need - to be saved. N.B. the call insn might set a subreg of a - multi-hard-reg pseudo; then the pseudo is considered live - during the call, but the subreg that is set isn't. */ - CLEAR_HARD_REG_SET (this_insn_sets); - note_stores (PATTERN (insn), mark_set_regs, &this_insn_sets); - - /* Compute which hard regs must be saved before this call. */ - AND_COMPL_HARD_REG_SET (hard_regs_to_save, call_fixed_reg_set); - AND_COMPL_HARD_REG_SET (hard_regs_to_save, this_insn_sets); - AND_COMPL_HARD_REG_SET (hard_regs_to_save, hard_regs_saved); - AND_HARD_REG_SET (hard_regs_to_save, call_used_reg_set); - - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_to_save, regno)) - regno += insert_save (chain, 1, regno, &hard_regs_to_save, save_mode); - - /* Must recompute n_regs_saved. */ - n_regs_saved = 0; - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_saved, regno)) - n_regs_saved++; - } - } - - if (chain->next == 0 || chain->next->block != chain->block) - { - int regno; - /* At the end of the basic block, we must restore any registers that - remain saved. If the last insn in the block is a JUMP_INSN, put - the restore before the insn, otherwise, put it after the insn. */ - - if (n_regs_saved) - for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) - if (TEST_HARD_REG_BIT (hard_regs_saved, regno)) - regno += insert_restore (chain, JUMP_P (insn), - regno, MOVE_MAX_WORDS, save_mode); - } - } -} - -/* Here from note_stores, or directly from save_call_clobbered_regs, when - an insn stores a value in a register. - Set the proper bit or bits in this_insn_sets. All pseudos that have - been assigned hard regs have had their register number changed already, - so we can ignore pseudos. */ -static void -mark_set_regs (rtx reg, const_rtx setter ATTRIBUTE_UNUSED, void *data) -{ - int regno, endregno, i; - HARD_REG_SET *this_insn_sets = (HARD_REG_SET *) data; - - if (GET_CODE (reg) == SUBREG) - { - rtx inner = SUBREG_REG (reg); - if (!REG_P (inner) || REGNO (inner) >= FIRST_PSEUDO_REGISTER) - return; - regno = subreg_regno (reg); - endregno = regno + subreg_nregs (reg); - } - else if (REG_P (reg) - && REGNO (reg) < FIRST_PSEUDO_REGISTER) - { - regno = REGNO (reg); - endregno = END_HARD_REGNO (reg); - } - else - return; - - for (i = regno; i < endregno; i++) - SET_HARD_REG_BIT (*this_insn_sets, i); -} - -/* Here from note_stores when an insn stores a value in a register. - Set the proper bit or bits in the passed regset. All pseudos that have - been assigned hard regs have had their register number changed already, - so we can ignore pseudos. */ -static void -add_stored_regs (rtx reg, const_rtx setter, void *data) -{ - int regno, endregno, i; - enum machine_mode mode = GET_MODE (reg); - int offset = 0; - - if (GET_CODE (setter) == CLOBBER) - return; - - if (GET_CODE (reg) == SUBREG - && REG_P (SUBREG_REG (reg)) - && REGNO (SUBREG_REG (reg)) < FIRST_PSEUDO_REGISTER) - { - offset = subreg_regno_offset (REGNO (SUBREG_REG (reg)), - GET_MODE (SUBREG_REG (reg)), - SUBREG_BYTE (reg), - GET_MODE (reg)); - regno = REGNO (SUBREG_REG (reg)) + offset; - endregno = regno + subreg_nregs (reg); - } - else - { - if (!REG_P (reg) || REGNO (reg) >= FIRST_PSEUDO_REGISTER) - return; - - regno = REGNO (reg) + offset; - endregno = end_hard_regno (mode, regno); - } - - for (i = regno; i < endregno; i++) - SET_REGNO_REG_SET ((regset) data, i); -} - -/* Walk X and record all referenced registers in REFERENCED_REGS. */ -static void -mark_referenced_regs (rtx x) -{ - enum rtx_code code = GET_CODE (x); - const char *fmt; - int i, j; - - if (code == SET) - mark_referenced_regs (SET_SRC (x)); - if (code == SET || code == CLOBBER) - { - x = SET_DEST (x); - code = GET_CODE (x); - if ((code == REG && REGNO (x) < FIRST_PSEUDO_REGISTER) - || code == PC || code == CC0 - || (code == SUBREG && REG_P (SUBREG_REG (x)) - && REGNO (SUBREG_REG (x)) < FIRST_PSEUDO_REGISTER - /* If we're setting only part of a multi-word register, - we shall mark it as referenced, because the words - that are not being set should be restored. */ - && ((GET_MODE_SIZE (GET_MODE (x)) - >= GET_MODE_SIZE (GET_MODE (SUBREG_REG (x)))) - || (GET_MODE_SIZE (GET_MODE (SUBREG_REG (x))) - <= UNITS_PER_WORD)))) - return; - } - if (code == MEM || code == SUBREG) - { - x = XEXP (x, 0); - code = GET_CODE (x); - } - - if (code == REG) - { - int regno = REGNO (x); - int hardregno = (regno < FIRST_PSEUDO_REGISTER ? regno - : reg_renumber[regno]); - - if (hardregno >= 0) - add_to_hard_reg_set (&referenced_regs, GET_MODE (x), hardregno); - /* If this is a pseudo that did not get a hard register, scan its - memory location, since it might involve the use of another - register, which might be saved. */ - else if (reg_equiv_mem[regno] != 0) - mark_referenced_regs (XEXP (reg_equiv_mem[regno], 0)); - else if (reg_equiv_address[regno] != 0) - mark_referenced_regs (reg_equiv_address[regno]); - return; - } - - fmt = GET_RTX_FORMAT (code); - for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) - { - if (fmt[i] == 'e') - mark_referenced_regs (XEXP (x, i)); - else if (fmt[i] == 'E') - for (j = XVECLEN (x, i) - 1; j >= 0; j--) - mark_referenced_regs (XVECEXP (x, i, j)); - } -} - -/* Insert a sequence of insns to restore. Place these insns in front of - CHAIN if BEFORE_P is nonzero, behind the insn otherwise. MAXRESTORE is - the maximum number of registers which should be restored during this call. - It should never be less than 1 since we only work with entire registers. - - Note that we have verified in init_caller_save that we can do this - with a simple SET, so use it. Set INSN_CODE to what we save there - since the address might not be valid so the insn might not be recognized. - These insns will be reloaded and have register elimination done by - find_reload, so we need not worry about that here. - - Return the extra number of registers saved. */ - -static int -insert_restore (struct insn_chain *chain, int before_p, int regno, - int maxrestore, enum machine_mode *save_mode) -{ - int i, k; - rtx pat = NULL_RTX; - int code; - unsigned int numregs = 0; - struct insn_chain *new_chain; - rtx mem; - - /* A common failure mode if register status is not correct in the - RTL is for this routine to be called with a REGNO we didn't - expect to save. That will cause us to write an insn with a (nil) - SET_DEST or SET_SRC. Instead of doing so and causing a crash - later, check for this common case here instead. This will remove - one step in debugging such problems. */ - gcc_assert (regno_save_mem[regno][1]); - - /* Get the pattern to emit and update our status. - - See if we can restore `maxrestore' registers at once. Work - backwards to the single register case. */ - for (i = maxrestore; i > 0; i--) - { - int j; - int ok = 1; - - if (regno_save_mem[regno][i] == 0) - continue; - - for (j = 0; j < i; j++) - if (! TEST_HARD_REG_BIT (hard_regs_saved, regno + j)) - { - ok = 0; - break; - } - /* Must do this one restore at a time. */ - if (! ok) - continue; - - numregs = i; - break; - } - - mem = regno_save_mem [regno][numregs]; - if (save_mode [regno] != VOIDmode - && save_mode [regno] != GET_MODE (mem) - && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]] - /* Check that insn to restore REGNO in save_mode[regno] is - correct. */ - && reg_save_code (regno, save_mode[regno]) >= 0) - mem = adjust_address (mem, save_mode[regno], 0); - else - mem = copy_rtx (mem); - - /* Verify that the alignment of spill space is equal to or greater - than required. */ - gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT, - GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem)); - - pat = gen_rtx_SET (VOIDmode, - gen_rtx_REG (GET_MODE (mem), - regno), mem); - code = reg_restore_code (regno, GET_MODE (mem)); - new_chain = insert_one_insn (chain, before_p, code, pat); - - /* Clear status for all registers we restored. */ - for (k = 0; k < i; k++) - { - CLEAR_HARD_REG_BIT (hard_regs_saved, regno + k); - SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k); - n_regs_saved--; - } - - /* Tell our callers how many extra registers we saved/restored. */ - return numregs - 1; -} - -/* Like insert_restore above, but save registers instead. */ - -static int -insert_save (struct insn_chain *chain, int before_p, int regno, - HARD_REG_SET (*to_save), enum machine_mode *save_mode) -{ - int i; - unsigned int k; - rtx pat = NULL_RTX; - int code; - unsigned int numregs = 0; - struct insn_chain *new_chain; - rtx mem; - - /* A common failure mode if register status is not correct in the - RTL is for this routine to be called with a REGNO we didn't - expect to save. That will cause us to write an insn with a (nil) - SET_DEST or SET_SRC. Instead of doing so and causing a crash - later, check for this common case here. This will remove one - step in debugging such problems. */ - gcc_assert (regno_save_mem[regno][1]); - - /* Get the pattern to emit and update our status. - - See if we can save several registers with a single instruction. - Work backwards to the single register case. */ - for (i = MOVE_MAX_WORDS; i > 0; i--) - { - int j; - int ok = 1; - if (regno_save_mem[regno][i] == 0) - continue; - - for (j = 0; j < i; j++) - if (! TEST_HARD_REG_BIT (*to_save, regno + j)) - { - ok = 0; - break; - } - /* Must do this one save at a time. */ - if (! ok) - continue; - - numregs = i; - break; - } - - mem = regno_save_mem [regno][numregs]; - if (save_mode [regno] != VOIDmode - && save_mode [regno] != GET_MODE (mem) - && numregs == (unsigned int) hard_regno_nregs[regno][save_mode [regno]] - /* Check that insn to save REGNO in save_mode[regno] is - correct. */ - && reg_save_code (regno, save_mode[regno]) >= 0) - mem = adjust_address (mem, save_mode[regno], 0); - else - mem = copy_rtx (mem); - - /* Verify that the alignment of spill space is equal to or greater - than required. */ - gcc_assert (MIN (MAX_SUPPORTED_STACK_ALIGNMENT, - GET_MODE_ALIGNMENT (GET_MODE (mem))) <= MEM_ALIGN (mem)); - - pat = gen_rtx_SET (VOIDmode, mem, - gen_rtx_REG (GET_MODE (mem), - regno)); - code = reg_save_code (regno, GET_MODE (mem)); - new_chain = insert_one_insn (chain, before_p, code, pat); - - /* Set hard_regs_saved and dead_or_set for all the registers we saved. */ - for (k = 0; k < numregs; k++) - { - SET_HARD_REG_BIT (hard_regs_saved, regno + k); - SET_REGNO_REG_SET (&new_chain->dead_or_set, regno + k); - n_regs_saved++; - } - - /* Tell our callers how many extra registers we saved/restored. */ - return numregs - 1; -} - -/* A for_each_rtx callback used by add_used_regs. Add the hard-register - equivalent of each REG to regset DATA. */ - -static int -add_used_regs_1 (rtx *loc, void *data) -{ - int regno, i; - regset live; - rtx x; - - x = *loc; - live = (regset) data; - if (REG_P (x)) - { - regno = REGNO (x); - if (!HARD_REGISTER_NUM_P (regno)) - regno = reg_renumber[regno]; - if (regno >= 0) - for (i = hard_regno_nregs[regno][GET_MODE (x)] - 1; i >= 0; i--) - SET_REGNO_REG_SET (live, regno + i); - } - return 0; -} - -/* A note_uses callback used by insert_one_insn. Add the hard-register - equivalent of each REG to regset DATA. */ - -static void -add_used_regs (rtx *loc, void *data) -{ - for_each_rtx (loc, add_used_regs_1, data); -} - -/* Emit a new caller-save insn and set the code. */ -static struct insn_chain * -insert_one_insn (struct insn_chain *chain, int before_p, int code, rtx pat) -{ - rtx insn = chain->insn; - struct insn_chain *new_chain; - -#ifdef HAVE_cc0 - /* If INSN references CC0, put our insns in front of the insn that sets - CC0. This is always safe, since the only way we could be passed an - insn that references CC0 is for a restore, and doing a restore earlier - isn't a problem. We do, however, assume here that CALL_INSNs don't - reference CC0. Guard against non-INSN's like CODE_LABEL. */ - - if ((NONJUMP_INSN_P (insn) || JUMP_P (insn)) - && before_p - && reg_referenced_p (cc0_rtx, PATTERN (insn))) - chain = chain->prev, insn = chain->insn; -#endif - - new_chain = new_insn_chain (); - if (before_p) - { - rtx link; - - new_chain->prev = chain->prev; - if (new_chain->prev != 0) - new_chain->prev->next = new_chain; - else - reload_insn_chain = new_chain; - - chain->prev = new_chain; - new_chain->next = chain; - new_chain->insn = emit_insn_before (pat, insn); - /* ??? It would be nice if we could exclude the already / still saved - registers from the live sets. */ - COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout); - note_uses (&PATTERN (chain->insn), add_used_regs, - &new_chain->live_throughout); - /* If CHAIN->INSN is a call, then the registers which contain - the arguments to the function are live in the new insn. */ - if (CALL_P (chain->insn)) - for (link = CALL_INSN_FUNCTION_USAGE (chain->insn); - link != NULL_RTX; - link = XEXP (link, 1)) - note_uses (&XEXP (link, 0), add_used_regs, - &new_chain->live_throughout); - - CLEAR_REG_SET (&new_chain->dead_or_set); - if (chain->insn == BB_HEAD (BASIC_BLOCK (chain->block))) - BB_HEAD (BASIC_BLOCK (chain->block)) = new_chain->insn; - } - else - { - new_chain->next = chain->next; - if (new_chain->next != 0) - new_chain->next->prev = new_chain; - chain->next = new_chain; - new_chain->prev = chain; - new_chain->insn = emit_insn_after (pat, insn); - /* ??? It would be nice if we could exclude the already / still saved - registers from the live sets, and observe REG_UNUSED notes. */ - COPY_REG_SET (&new_chain->live_throughout, &chain->live_throughout); - /* Registers that are set in CHAIN->INSN live in the new insn. - (Unless there is a REG_UNUSED note for them, but we don't - look for them here.) */ - note_stores (PATTERN (chain->insn), add_stored_regs, - &new_chain->live_throughout); - CLEAR_REG_SET (&new_chain->dead_or_set); - if (chain->insn == BB_END (BASIC_BLOCK (chain->block))) - BB_END (BASIC_BLOCK (chain->block)) = new_chain->insn; - } - new_chain->block = chain->block; - new_chain->is_caller_save_insn = 1; - - INSN_CODE (new_chain->insn) = code; - return new_chain; -} -#include "gt-caller-save.h" -- cgit v1.2.3