From df62c1c110e8532b995b23540b7e3695729c0779 Mon Sep 17 00:00:00 2001 From: Jing Yu Date: Thu, 5 Nov 2009 15:11:04 -0800 Subject: Check in gcc sources for prebuilt toolchains in Eclair. --- gcc-4.2.1/gcc/ada/errout.ads | 673 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 673 insertions(+) create mode 100644 gcc-4.2.1/gcc/ada/errout.ads (limited to 'gcc-4.2.1/gcc/ada/errout.ads') diff --git a/gcc-4.2.1/gcc/ada/errout.ads b/gcc-4.2.1/gcc/ada/errout.ads new file mode 100644 index 000000000..62556d841 --- /dev/null +++ b/gcc-4.2.1/gcc/ada/errout.ads @@ -0,0 +1,673 @@ +------------------------------------------------------------------------------ +-- -- +-- GNAT COMPILER COMPONENTS -- +-- -- +-- E R R O U T -- +-- -- +-- S p e c -- +-- -- +-- Copyright (C) 1992-2006, Free Software Foundation, Inc. -- +-- -- +-- GNAT is free software; you can redistribute it and/or modify it under -- +-- terms of the GNU General Public License as published by the Free Soft- -- +-- ware Foundation; either version 2, or (at your option) any later ver- -- +-- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- +-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- +-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- +-- for more details. You should have received a copy of the GNU General -- +-- Public License distributed with GNAT; see file COPYING. If not, write -- +-- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, -- +-- Boston, MA 02110-1301, USA. -- +-- -- +-- GNAT was originally developed by the GNAT team at New York University. -- +-- Extensive contributions were provided by Ada Core Technologies Inc. -- +-- -- +------------------------------------------------------------------------------ + +-- This package contains the routines to output error messages. They are +-- basically system independent, however in some environments, e.g. when the +-- parser is embedded into an editor, it may be appropriate to replace the +-- implementation of this package. + +with Err_Vars; +with Erroutc; +with Table; +with Types; use Types; +with Uintp; use Uintp; + +with System; + +package Errout is + + Serious_Errors_Detected : Nat renames Err_Vars.Serious_Errors_Detected; + -- This is a count of errors that are serious enough to stop expansion, + -- and hence to prevent generation of an object file even if the switch + -- -gnatQ is set. + + Total_Errors_Detected : Nat renames Err_Vars.Total_Errors_Detected; + -- Number of errors detected so far. Includes count of serious errors and + -- non-serious errors, so this value is always greater than or equal to + -- the Serious_Errors_Detected value. + + Warnings_Detected : Nat renames Err_Vars.Warnings_Detected; + -- Number of warnings detected + + Configurable_Run_Time_Violations : Nat := 0; + -- Count of configurable run time violations so far. This is used to + -- suppress certain cascaded error messages when we know that we may not + -- have fully expanded some items, due to high integrity violations (i.e. + -- the use of constructs not permitted by the library in use, or improper + -- constructs in No_Run_Time mode). + + type Compiler_State_Type is (Parsing, Analyzing); + Compiler_State : Compiler_State_Type; + -- Indicates current state of compilation. This is put in the Errout spec + -- because it affects the action of the error message handling. In + -- particular, an attempt is made by Errout to suppress cascaded error + -- messages in Parsing mode, but not in the other modes. + + Current_Error_Source_File : Source_File_Index + renames Err_Vars.Current_Error_Source_File; + -- Id of current messages. Used to post file name when unit changes. This + -- is initialized to Main_Source_File at the start of a compilation, which + -- means that no file names will be output unless there are errors in + -- units other than the main unit. However, if the main unit has a pragma + -- Source_Reference line, then this is initialized to No_Source_File, to + -- force an initial reference to the real source file name. + + Raise_Exception_On_Error : Nat renames Err_Vars.Raise_Exception_On_Error; + -- If this value is non-zero, then any attempt to generate an error + -- message raises the exception Error_Msg_Exception, and the error message + -- is not output. This is used for defending against junk resulting from + -- illegalities, and also for substitution of more appropriate error + -- messages from higher semantic levels. It is a counter so that the + -- increment/decrement protocol nests neatly. + + Error_Msg_Exception : exception renames Err_Vars.Error_Msg_Exception; + -- Exception raised if Raise_Exception_On_Error is true + + ----------------------------------- + -- Suppression of Error Messages -- + ----------------------------------- + + -- In an effort to reduce the impact of redundant error messages, the + -- error output routines in this package normally suppress certain + -- classes of messages as follows: + + -- 1. Identical messages placed at the same point in the text. Such + -- duplicate error message result for example from rescanning + -- sections of the text that contain lexical errors. Only one of + -- such a set of duplicate messages is output, and the rest are + -- suppressed. + + -- 2. If more than one parser message is generated for a single source + -- line, then only the first message is output, the remaining + -- messages on the same line are suppressed. + + -- 3. If a message is posted on a node for which a message has been + -- previously posted, then only the first message is retained. The + -- Error_Posted flag is used to detect such multiple postings. Note + -- that this only applies to semantic messages, since otherwise + -- for parser messages, this would be a special case of case 2. + + -- 4. If a message is posted on a node whose Etype or Entity + -- fields reference entities on which an error message has + -- already been placed, as indicated by the Error_Posted flag + -- being set on these entities, then the message is suppressed. + + -- 5. If a message attempts to insert an Error node, or a direct + -- reference to the Any_Type node, then the message is suppressed. + + -- 6. Note that cases 2-5 only apply to error messages, not warning + -- messages. Warning messages are only suppressed for case 1. + + -- This normal suppression action may be overridden in cases 2-5 (but not + -- in case 1) by setting All_Errors mode, or by setting the special + -- unconditional message insertion character (!) at the end of the message + -- text as described below. + + --------------------------------------------------------- + -- Error Message Text and Message Insertion Characters -- + --------------------------------------------------------- + + -- Error message text strings are composed of lower case letters, digits + -- and the special characters space, comma, period, colon and semicolon, + -- apostrophe and parentheses. Special insertion characters can also + -- appear which cause the error message circuit to modify the given + -- string as follows: + + -- Insertion character % (Percent: insert name from Names table) + -- The character % is replaced by the text for the name specified by + -- the Name_Id value stored in Error_Msg_Name_1. A blank precedes the + -- name if it is preceded by a non-blank character other than left + -- parenthesis. The name is enclosed in quotes unless manual quotation + -- mode is set. If the Name_Id is set to No_Name, then no insertion + -- occurs; if the Name_Id is set to Error_Name, then the string + -- is inserted. A second and third % may appear in a single + -- message, similarly replaced by the names which are specified by the + -- Name_Id values stored in Error_Msg_Name_2 and Error_Msg_Name_3. The + -- names are decoded and cased according to the current identifier + -- casing mode. + + -- Insertion character $ (Dollar: insert unit name from Names table) + -- The character $ is treated similarly to %, except that the name is + -- obtained from the Unit_Name_Type value in Error_Msg_Unit_1 and + -- Error_Msg_Unit_2, as provided by Get_Unit_Name_String in package + -- Uname. Note that this name includes the postfix (spec) or (body) + -- strings. If this postfix is not required, use the normal % + -- insertion for the unit name. + + -- Insertion character { (Left brace: insert literally from names table) + -- The character { is treated similarly to %, except that the name is + -- output literally as stored in the names table without adjusting the + -- casing. This can be used for file names and in other situations + -- where the name string is to be output unchanged. + + -- Insertion character * (Asterisk, insert reserved word name) + -- The insertion character * is treated exactly like % except that the + -- resulting name is cased according to the default conventions for + -- reserved words (see package Scans). + + -- Insertion character & (Ampersand: insert name from node) + -- The insertion character & is treated similarly to %, except that + -- the name is taken from the Chars field of the given node, and may + -- refer to a child unit name, or a selected component. The casing is, + -- if possible, taken from the original source reference, which is + -- obtained from the Sloc field of the given node or nodes. If no Sloc + -- is available (happens e.g. for nodes in package Standard), then the + -- default case (see Scans spec) is used. The nodes to be used are + -- stored in Error_Msg_Node_1, Error_Msg_Node_2. No insertion occurs + -- for the Empty node, and the Error node results in the insertion of + -- the characters . In addition, if the special global variable + -- Error_Msg_Qual_Level is non-zero, then the reference will include + -- up to the given number of levels of qualification, using the scope + -- chain. + + -- Insertion character # (Pound: insert line number reference) + -- The character # is replaced by the string indicating the source + -- position stored in Error_Msg_Sloc. There are three cases: + -- + -- for package Standard: in package Standard + -- for locations in current file: at line nnn:ccc + -- for locations in other files: at filename:nnn:ccc + -- + -- By convention, the # insertion character is only used at the end of + -- an error message, so the above strings only appear as the last + -- characters of an error message. + + -- Insertion character } (Right brace: insert type reference) + -- The character } is replaced by a string describing the type + -- referenced by the entity whose Id is stored in Error_Msg_Node_1. + -- the string gives the name or description of the type, and also + -- where appropriate the location of its declaration. Special cases + -- like "some integer type" are handled appropriately. Only one } is + -- allowed in a message, since there is not enough room for two (the + -- insertion can be quite long, including a file name) In addition, if + -- the special global variable Error_Msg_Qual_Level is non-zero, then + -- the reference will include up to the given number of levels of + -- qualification, using the scope chain. + + -- Insertion character @ (At: insert column number reference) + -- The character @ is replaced by null if the RM_Column_Check mode is + -- off (False). If the switch is on (True), then @ is replaced by the + -- text string " in column nnn" where nnn is the decimal + -- representation of the column number stored in Error_Msg_Col plus + -- one (the plus one is because the number is stored 0-origin and + -- displayed 1-origin). + + -- Insertion character ^ (Carret: insert integer value) + -- The character ^ is replaced by the decimal conversion of the Uint + -- value stored in Error_Msg_Uint_1, with a possible leading minus. + -- A second ^ may occur in the message, in which case it is replaced + -- by the decimal conversion of the Uint value in Error_Msg_Uint_2. + + -- Insertion character > (Right bracket, run time name) + -- The character > is replaced by a string of the form (name) if + -- Targparm scanned out a Run_Time_Name (see package Targparm for + -- details). The name is enclosed in parentheses and output in mixed + -- case mode (upper case after any space in the name). If no run time + -- name is defined, this insertion character has no effect. + + -- Insertion character ! (Exclamation: unconditional message) + -- The character ! appearing as the last character of a message makes + -- the message unconditional which means that it is output even if it + -- would normally be suppressed. See section above for a description + -- of the cases in which messages are normally suppressed. Note that + -- warnings are never suppressed, so the use of the ! character in a + -- warning message is never useful. + + -- Insertion character ? (Question: warning message) + -- The character ? appearing anywhere in a message makes the message a + -- warning instead of a normal error message, and the text of the + -- message will be preceded by "Warning:" instead of "Error:" in the + -- normal case. The handling of warnings if further controlled by the + -- Warning_Mode option (-w switch), see package Opt for further + -- details, and also by the current setting from pragma Warnings. This + -- pragma applies only to warnings issued from the semantic phase (not + -- the parser), but currently all relevant warnings are posted by the + -- semantic phase anyway. Messages starting with (style) are also + -- treated as warning messages. + + -- Insertion character < (Less Than: conditional warning message) + -- The character < appearing anywhere in a message is used for a + -- conditional error message. If Error_Msg_Warn is True, then the + -- effect is the same as ? described above. If Error_Msg_Warn is + -- False, then there is no effect. + + -- Insertion character A-Z (Upper case letter: Ada reserved word) + -- If two or more upper case letters appear in the message, they are + -- taken as an Ada reserved word, and are converted to the default + -- case for reserved words (see Scans package spec). Surrounding + -- quotes are added unless manual quotation mode is currently set. + + -- Insertion character ` (Backquote: set manual quotation mode) + -- The backquote character always appears in pairs. Each backquote of + -- the pair is replaced by a double quote character. In addition, Any + -- reserved keywords, or name insertions between these backquotes are + -- not surrounded by the usual automatic double quotes. See the + -- section below on manual quotation mode for further details. + + -- Insertion character ' (Quote: literal character) + -- Precedes a character which is placed literally into the message. + -- Used to insert characters into messages that are one of the + -- insertion characters defined here. Also useful in inserting + -- sequences of upper case letters (e.g. RM) which are not to be + -- treated as keywords. + + -- Insertion character \ (Backslash: continuation message) + -- Indicates that the message is a continuation of a message + -- previously posted. This is used to ensure that such groups of + -- messages are treated as a unit. The \ character must be the first + -- character of the message text. + + -- Insertion character | (vertical bar, non-serious error) + -- By default, error messages (other than warning messages) are + -- considered to be fatal error messages which prevent expansion or + -- generation of code in the presence of the -gnatQ switch. If the + -- insertion character | appears, the message is considered to be + -- non-serious, and does not cause Serious_Errors_Detected to be + -- incremented (so expansion is not prevented by such a msg). + + ---------------------------------------- + -- Specialization of Messages for VMS -- + ---------------------------------------- + + -- Some messages mention gcc-style switch names. When using an OpenVMS + -- host, such switch names must be converted to their corresponding VMS + -- qualifer. The following table controls this translation. In each case + -- the original message must contain the string "-xxx switch", where xxx + -- is the Gname? entry from below, and this string will be replaced by + -- "/yyy qualifier", where yyy is the corresponding Vname? entry. + + Gname1 : aliased constant String := "fno-strict-aliasing"; + Vname1 : aliased constant String := "OPTIMIZE=NO_STRICT_ALIASING"; + + Gname2 : aliased constant String := "gnatX"; + Vname2 : aliased constant String := "EXTENSIONS_ALLOWED"; + + Gname3 : aliased constant String := "gnatW"; + Vname3 : aliased constant String := "WIDE_CHARACTER_ENCODING"; + + Gname4 : aliased constant String := "gnatf"; + Vname4 : aliased constant String := "REPORT_ERRORS=FULL"; + + Gname5 : aliased constant String := "gnat05"; + Vname5 : aliased constant String := "05"; + + type Cstring_Ptr is access constant String; + + Gnames : array (Nat range <>) of Cstring_Ptr := + (Gname1'Access, + Gname2'Access, + Gname3'Access, + Gname4'Access, + Gname5'Access); + + Vnames : array (Nat range <>) of Cstring_Ptr := + (Vname1'Access, + Vname2'Access, + Vname3'Access, + Vname4'Access, + Vname5'Access); + + ----------------------------------------------------- + -- Global Values Used for Error Message Insertions -- + ----------------------------------------------------- + + -- The following global variables are essentially additional parameters + -- passed to the error message routine for insertion sequences described + -- above. The reason these are passed globally is that the insertion + -- mechanism is essentially an untyped one in which the appropriate + -- variables are set depending on the specific insertion characters used. + + -- Note that is mandatory that the caller ensure that global variables + -- are set before the Error_Msg call, otherwise the result is undefined. + + Error_Msg_Col : Column_Number renames Err_Vars.Error_Msg_Col; + -- Column for @ insertion character in message + + Error_Msg_Uint_1 : Uint renames Err_Vars.Error_Msg_Uint_1; + Error_Msg_Uint_2 : Uint renames Err_Vars.Error_Msg_Uint_2; + -- Uint values for ^ insertion characters in message + + Error_Msg_Sloc : Source_Ptr renames Err_Vars.Error_Msg_Sloc; + -- Source location for # insertion character in message + + Error_Msg_Name_1 : Name_Id renames Err_Vars.Error_Msg_Name_1; + Error_Msg_Name_2 : Name_Id renames Err_Vars.Error_Msg_Name_2; + Error_Msg_Name_3 : Name_Id renames Err_Vars.Error_Msg_Name_3; + -- Name_Id values for % insertion characters in message + + Error_Msg_Unit_1 : Name_Id renames Err_Vars.Error_Msg_Unit_1; + Error_Msg_Unit_2 : Name_Id renames Err_Vars.Error_Msg_Unit_2; + -- Name_Id values for $ insertion characters in message + + Error_Msg_Node_1 : Node_Id renames Err_Vars.Error_Msg_Node_1; + Error_Msg_Node_2 : Node_Id renames Err_Vars.Error_Msg_Node_2; + -- Node_Id values for & insertion characters in message + + Error_Msg_Qual_Level : Int renames Err_Vars.Error_Msg_Qual_Level; + -- Number of levels of qualification required for type name (see the + -- description of the } insertion character. Note that this value does + -- note get reset by any Error_Msg call, so the caller is responsible + -- for resetting it. + + Error_Msg_Warn : Boolean renames Err_Vars.Error_Msg_Warn; + -- Used if current message contains a < insertion character to indicate + -- if the current message is a warning message. + + ----------------------------------------------------- + -- Format of Messages and Manual Quotation Control -- + ----------------------------------------------------- + + -- Messages are generally all in lower case, except for inserted names + -- and appear in one of the following three forms: + + -- error: text + -- warning: text + + -- The prefixes error and warning are supplied automatically (depending + -- on the use of the ? insertion character), and the call to the error + -- message routine supplies the text. The "error: " prefix is omitted + -- in brief error message formats. + + -- Reserved Ada keywords in the message are in the default keyword case + -- (determined from the given source program), surrounded by quotation + -- marks. This is achieved by spelling the reserved word in upper case + -- letters, which is recognized as a request for insertion of quotation + -- marks by the error text processor. Thus for example: + + -- Error_Msg_AP ("IS expected"); + + -- would result in the output of one of the following: + + -- error: "is" expected + -- error: "IS" expected + -- error: "Is" expected + + -- the choice between these being made by looking at the casing convention + -- used for keywords (actually the first compilation unit keyword) in the + -- source file. + + -- In the case of names, the default mode for the error text processor + -- is to surround the name by quotation marks automatically. The case + -- used for the identifier names is taken from the source program where + -- possible, and otherwise is the default casing convention taken from + -- the source file usage. + + -- In some cases, better control over the placement of quote marks is + -- required. This is achieved using manual quotation mode. In this mode, + -- one or more insertion sequences is surrounded by backquote characters. + -- The backquote characters are output as double quote marks, and normal + -- automatic insertion of quotes is suppressed between the double quotes. + -- For example: + + -- Error_Msg_AP ("`END &;` expected"); + + -- generates a message like + + -- error: "end Open_Scope;" expected + + -- where the node specifying the name Open_Scope has been stored in + -- Error_Msg_Node_1 prior to the call. The great majority of error + -- messages operates in normal quotation mode. + + -- Note: the normal automatic insertion of spaces before insertion + -- sequences (such as those that come from & and %) is suppressed in + -- manual quotation mode, so blanks, if needed as in the above example, + -- must be explicitly present. + + ---------------------------- + -- Message ID Definitions -- + ---------------------------- + + subtype Error_Msg_Id is Erroutc.Error_Msg_Id; + function "=" (Left, Right : Error_Msg_Id) return Boolean + renames Erroutc."="; + -- A type used to represent specific error messages. Used by the clients + -- of this package only in the context of the Get_Error_Id and + -- Change_Error_Text subprograms. + + No_Error_Msg : constant Error_Msg_Id := Erroutc.No_Error_Msg; + -- A constant which is different from any value returned by Get_Error_Id. + -- Typically used by a client to indicate absense of a saved Id value. + + function Get_Msg_Id return Error_Msg_Id renames Erroutc.Get_Msg_Id; + -- Returns the Id of the message most recently posted using one of the + -- Error_Msg routines. + + function Get_Location (E : Error_Msg_Id) return Source_Ptr + renames Erroutc.Get_Location; + -- Returns the flag location of the error message with the given id E + + ------------------------ + -- List Pragmas Table -- + ------------------------ + + -- When a pragma Page or pragma List is encountered by the parser, an + -- entry is made in the following table. This table is then used to + -- control the full listing if one is being generated. Note that the + -- reason we do the processing in the parser is so that we get proper + -- listing control even in syntax check only mode. + + type List_Pragma_Type is (List_On, List_Off, Page); + + type List_Pragma_Record is record + Ptyp : List_Pragma_Type; + Ploc : Source_Ptr; + end record; + + -- Note: Ploc points to the terminating semicolon in the List_Off and Page + -- cases, and to the pragma keyword for List_On. In the case of a pragma + -- List_Off, a List_On entry is also made in the table, pointing to the + -- pragma keyword. This ensures that, as required, a List (Off) pragma is + -- listed even in list off mode. + + package List_Pragmas is new Table.Table ( + Table_Component_Type => List_Pragma_Record, + Table_Index_Type => Int, + Table_Low_Bound => 1, + Table_Initial => 50, + Table_Increment => 200, + Table_Name => "List_Pragmas"); + + --------------------------- + -- Ignore_Errors Feature -- + --------------------------- + + -- In certain cases, notably for optional subunits, the compiler operates + -- in a mode where errors are to be ignored, and the whole unit is to be + -- considered as not present. To implement this we provide the following + -- flag to enable special handling, where error messages are suppressed, + -- but the Fatal_Error flag will still be set in the normal manner. + + Ignore_Errors_Enable : Nat := 0; + -- Triggering switch. If non-zero, then ignore errors mode is activated. + -- This is a counter to allow convenient nesting of enable/disable. + + ------------------------------ + -- Error Output Subprograms -- + ------------------------------ + + procedure Initialize; + -- Initializes for output of error messages. Must be called for each + -- source file before using any of the other routines in the package. + + procedure Finalize; + -- Finalize processing of error messages for one file and output message + -- indicating the number of detected errors. + + procedure Error_Msg (Msg : String; Flag_Location : Source_Ptr); + -- Output a message at specified location. Can be called from the parser + -- or the semantic analyzer. + + procedure Error_Msg_S (Msg : String); + -- Output a message at current scan pointer location. This routine can be + -- called only from the parser, since it references Scan_Ptr. + + procedure Error_Msg_AP (Msg : String); + -- Output a message just after the previous token. This routine can be + -- called only from the parser, since it references Prev_Token_Ptr. + + procedure Error_Msg_BC (Msg : String); + -- Output a message just before the current token. Note that the important + -- difference between this and the previous routine is that the BC case + -- posts a flag on the current line, whereas AP can post a flag at the + -- end of the preceding line. This routine can be called only from the + -- parser, since it references Token_Ptr. + + procedure Error_Msg_SC (Msg : String); + -- Output a message at the start of the current token, unless we are at + -- the end of file, in which case we always output the message after the + -- last real token in the file. This routine can be called only from the + -- parser, since it references Token_Ptr. + + procedure Error_Msg_SP (Msg : String); + -- Output a message at the start of the previous token. This routine can + -- be called only from the parser, since it references Prev_Token_Ptr. + + procedure Error_Msg_N (Msg : String; N : Node_Or_Entity_Id); + -- Output a message at the Sloc of the given node. This routine can be + -- called from the parser or the semantic analyzer, although the call from + -- the latter is much more common (and is the most usual way of generating + -- error messages from the analyzer). The message text may contain a + -- single & insertion, which will reference the given node. The message is + -- suppressed if the node N already has a message posted, or if it is a + -- warning and warnings and N is an entity node for which warnings are + -- suppressed. + + procedure Error_Msg_F (Msg : String; N : Node_Id); + -- Similar to Error_Msg_N except that the message is placed on the + -- first node of the construct N (First_Node (N)). + + procedure Error_Msg_NE + (Msg : String; + N : Node_Or_Entity_Id; + E : Node_Or_Entity_Id); + -- Output a message at the Sloc of the given node N, with an insertion of + -- the name from the given entity node E. This is used by the semantic + -- routines, where this is a common error message situation. The Msg text + -- will contain a & or } as usual to mark the insertion point. This + -- routine can be called from the parser or the analyzer. + + procedure Error_Msg_FE + (Msg : String; + N : Node_Id; + E : Node_Or_Entity_Id); + -- Same as Error_Msg_NE, except that the message is placed on the first + -- node of the construct N (First_Node (N)). + + procedure Error_Msg_NEL + (Msg : String; + N : Node_Or_Entity_Id; + E : Node_Or_Entity_Id; + Flag_Location : Source_Ptr); + -- Exactly the same as Error_Msg_NE, except that the flag is placed at + -- the specified Flag_Location instead of at Sloc (N). + + procedure Error_Msg_NW + (Eflag : Boolean; + Msg : String; + N : Node_Or_Entity_Id); + -- This routine is used for posting a message conditionally. The message + -- is posted (with the same effect as Error_Msg_N (Msg, N) if and only + -- if Eflag is True and if the node N is within the main extended source + -- unit and comes from source. Typically this is a warning mode flag. + + procedure Change_Error_Text (Error_Id : Error_Msg_Id; New_Msg : String); + -- The error message text of the message identified by Id is replaced by + -- the given text. This text may contain insertion characters in the + -- usual manner, and need not be the same length as the original text. + + function First_Node (C : Node_Id) return Node_Id; + -- Given a construct C, finds the first node in the construct, i.e. the + -- one with the lowest Sloc value. This is useful in placing error msgs. + + function First_Sloc (N : Node_Id) return Source_Ptr; + -- Given the node for an expression, return a source pointer value that + -- points to the start of the first token in the expression. In the case + -- where the expression is parenthesized, an attempt is made to include + -- the parentheses (i.e. to return the location of the initial paren). + + procedure Purge_Messages (From : Source_Ptr; To : Source_Ptr) + renames Erroutc.Purge_Messages; + -- All error messages whose location is in the range From .. To (not + -- including the end points) will be deleted from the error listing. + + procedure Remove_Warning_Messages (N : Node_Id); + -- Remove any warning messages corresponding to the Sloc of N or any + -- of its descendent nodes. No effect if no such warnings. + + procedure Remove_Warning_Messages (L : List_Id); + -- Remove warnings on all elements of a list + + procedure Set_Ignore_Errors (To : Boolean); + -- Following a call to this procedure with To=True, all error calls are + -- ignored. A call with To=False restores the default treatment in which + -- error calls are treated as usual (and as described in this spec). + + procedure Set_Warnings_Mode_Off (Loc : Source_Ptr) + renames Erroutc.Set_Warnings_Mode_Off; + -- Called in response to a pragma Warnings (Off) to record the source + -- location from which warnings are to be turned off. + + procedure Set_Warnings_Mode_On (Loc : Source_Ptr) + renames Erroutc.Set_Warnings_Mode_On; + -- Called in response to a pragma Warnings (On) to record the source + -- location from which warnings are to be turned back on. + + function Compilation_Errors return Boolean + renames Erroutc.Compilation_Errors; + -- Returns true if errors have been detected, or warnings in -gnatwe + -- (treat warnings as errors) mode. + + procedure Error_Msg_CRT (Feature : String; N : Node_Id); + -- Posts a non-fatal message on node N saying that the feature identified + -- by the Feature argument is not supported in either configurable + -- run-time mode or no run-time mode (as appropriate). In the former case, + -- the name of the library is output if available. + + procedure dmsg (Id : Error_Msg_Id) renames Erroutc.dmsg; + -- Debugging routine to dump an error message + + ------------------------------------ + -- Utility Interface for Back End -- + ------------------------------------ + + -- The following subprograms can be used by the back end for the purposes + -- of concocting error messages that are not output via Errout, e.g. the + -- messages generated by the gcc back end. + + procedure Set_Identifier_Casing + (Identifier_Name : System.Address; + File_Name : System.Address); + -- The identifier is a null terminated string that represents the name of + -- an identifier appearing in the source program. File_Name is a null + -- terminated string giving the corresponding file name for the identifier + -- as obtained from the front end by the use of Full_Debug_Name to the + -- source file referenced by the corresponding source location value. On + -- return, the name is in Name_Buffer, null terminated with Name_Len set. + -- This name is the identifier name as passed, cased according to the + -- default identifier casing for the given file. + +end Errout; -- cgit v1.2.3