diff options
Diffstat (limited to 'gcc-4.9/libgomp/libgomp.info')
-rw-r--r-- | gcc-4.9/libgomp/libgomp.info | 3232 |
1 files changed, 0 insertions, 3232 deletions
diff --git a/gcc-4.9/libgomp/libgomp.info b/gcc-4.9/libgomp/libgomp.info deleted file mode 100644 index a2d8495a2..000000000 --- a/gcc-4.9/libgomp/libgomp.info +++ /dev/null @@ -1,3232 +0,0 @@ -This is libgomp.info, produced by makeinfo version 5.1 from -libgomp.texi. - -Copyright (C) 2006-2014 Free Software Foundation, Inc. - - Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.3 or -any later version published by the Free Software Foundation; with the -Invariant Sections being "Funding Free Software", the Front-Cover texts -being (a) (see below), and with the Back-Cover Texts being (b) (see -below). A copy of the license is included in the section entitled "GNU -Free Documentation License". - - (a) The FSF's Front-Cover Text is: - - A GNU Manual - - (b) The FSF's Back-Cover Text is: - - You have freedom to copy and modify this GNU Manual, like GNU -software. Copies published by the Free Software Foundation raise funds -for GNU development. -INFO-DIR-SECTION GNU Libraries -START-INFO-DIR-ENTRY -* libgomp: (libgomp). GNU OpenMP runtime library -END-INFO-DIR-ENTRY - - This manual documents the GNU implementation of the OpenMP API for -multi-platform shared-memory parallel programming in C/C++ and Fortran. - - Published by the Free Software Foundation 51 Franklin Street, Fifth -Floor Boston, MA 02110-1301 USA - - Copyright (C) 2006-2014 Free Software Foundation, Inc. - - Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.3 or -any later version published by the Free Software Foundation; with the -Invariant Sections being "Funding Free Software", the Front-Cover texts -being (a) (see below), and with the Back-Cover Texts being (b) (see -below). A copy of the license is included in the section entitled "GNU -Free Documentation License". - - (a) The FSF's Front-Cover Text is: - - A GNU Manual - - (b) The FSF's Back-Cover Text is: - - You have freedom to copy and modify this GNU Manual, like GNU -software. Copies published by the Free Software Foundation raise funds -for GNU development. - - -File: libgomp.info, Node: Top, Next: Enabling OpenMP, Up: (dir) - -Introduction -************ - -This manual documents the usage of libgomp, the GNU implementation of -the OpenMP (http://www.openmp.org) Application Programming Interface -(API) for multi-platform shared-memory parallel programming in C/C++ and -Fortran. - -* Menu: - -* Enabling OpenMP:: How to enable OpenMP for your applications. -* Runtime Library Routines:: The OpenMP runtime application programming - interface. -* Environment Variables:: Influencing runtime behavior with environment - variables. -* The libgomp ABI:: Notes on the external ABI presented by libgomp. -* Reporting Bugs:: How to report bugs in GNU OpenMP. -* Copying:: GNU general public license says - how you can copy and share libgomp. -* GNU Free Documentation License:: - How you can copy and share this manual. -* Funding:: How to help assure continued work for free - software. -* Library Index:: Index of this documentation. - - -File: libgomp.info, Node: Enabling OpenMP, Next: Runtime Library Routines, Prev: Top, Up: Top - -1 Enabling OpenMP -***************** - -To activate the OpenMP extensions for C/C++ and Fortran, the -compile-time flag '-fopenmp' must be specified. This enables the OpenMP -directive '#pragma omp' in C/C++ and '!$omp' directives in free form, -'c$omp', '*$omp' and '!$omp' directives in fixed form, '!$' conditional -compilation sentinels in free form and 'c$', '*$' and '!$' sentinels in -fixed form, for Fortran. The flag also arranges for automatic linking -of the OpenMP runtime library (*note Runtime Library Routines::). - - A complete description of all OpenMP directives accepted may be found -in the OpenMP Application Program Interface (http://www.openmp.org) -manual, version 4.0. - - -File: libgomp.info, Node: Runtime Library Routines, Next: Environment Variables, Prev: Enabling OpenMP, Up: Top - -2 Runtime Library Routines -************************** - -The runtime routines described here are defined by Section 3 of the -OpenMP specification in version 4.0. The routines are structured in -following three parts: - - Control threads, processors and the parallel environment. They have -C linkage, and do not throw exceptions. - -* Menu: - -* omp_get_active_level:: Number of active parallel regions -* omp_get_ancestor_thread_num:: Ancestor thread ID -* omp_get_cancellation:: Whether cancellation support is enabled -* omp_get_default_device:: Get the default device for target regions -* omp_get_dynamic:: Dynamic teams setting -* omp_get_level:: Number of parallel regions -* omp_get_max_active_levels:: Maximum number of active regions -* omp_get_max_threads:: Maximum number of threads of parallel region -* omp_get_nested:: Nested parallel regions -* omp_get_num_devices:: Number of target devices -* omp_get_num_procs:: Number of processors online -* omp_get_num_teams:: Number of teams -* omp_get_num_threads:: Size of the active team -* omp_get_proc_bind:: Whether theads may be moved between CPUs -* omp_get_schedule:: Obtain the runtime scheduling method -* omp_get_team_num:: Get team number -* omp_get_team_size:: Number of threads in a team -* omp_get_thread_limit:: Maximum number of threads -* omp_get_thread_num:: Current thread ID -* omp_in_parallel:: Whether a parallel region is active -* omp_in_final:: Whether in final or included task region -* omp_is_initial_device:: Whether executing on the host device -* omp_set_default_device:: Set the default device for target regions -* omp_set_dynamic:: Enable/disable dynamic teams -* omp_set_max_active_levels:: Limits the number of active parallel regions -* omp_set_nested:: Enable/disable nested parallel regions -* omp_set_num_threads:: Set upper team size limit -* omp_set_schedule:: Set the runtime scheduling method - - Initialize, set, test, unset and destroy simple and nested locks. - -* Menu: - -* omp_init_lock:: Initialize simple lock -* omp_set_lock:: Wait for and set simple lock -* omp_test_lock:: Test and set simple lock if available -* omp_unset_lock:: Unset simple lock -* omp_destroy_lock:: Destroy simple lock -* omp_init_nest_lock:: Initialize nested lock -* omp_set_nest_lock:: Wait for and set simple lock -* omp_test_nest_lock:: Test and set nested lock if available -* omp_unset_nest_lock:: Unset nested lock -* omp_destroy_nest_lock:: Destroy nested lock - - Portable, thread-based, wall clock timer. - -* Menu: - -* omp_get_wtick:: Get timer precision. -* omp_get_wtime:: Elapsed wall clock time. - - -File: libgomp.info, Node: omp_get_active_level, Next: omp_get_ancestor_thread_num, Up: Runtime Library Routines - -2.1 'omp_get_active_level' - Number of parallel regions -======================================================= - -_Description_: - This function returns the nesting level for the active parallel - blocks, which enclose the calling call. - -_C/C++_ - _Prototype_: 'int omp_get_active_level(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_active_level()' - -_See also_: - *note omp_get_level::, *note omp_get_max_active_levels::, *note - omp_set_max_active_levels:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.20. - - -File: libgomp.info, Node: omp_get_ancestor_thread_num, Next: omp_get_cancellation, Prev: omp_get_active_level, Up: Runtime Library Routines - -2.2 'omp_get_ancestor_thread_num' - Ancestor thread ID -====================================================== - -_Description_: - This function returns the thread identification number for the - given nesting level of the current thread. For values of LEVEL - outside zero to 'omp_get_level' -1 is returned; if LEVEL is - 'omp_get_level' the result is identical to 'omp_get_thread_num'. - -_C/C++_ - _Prototype_: 'int omp_get_ancestor_thread_num(int level);' - -_Fortran_: - _Interface_: 'integer function omp_get_ancestor_thread_num(level)' - 'integer level' - -_See also_: - *note omp_get_level::, *note omp_get_thread_num::, *note - omp_get_team_size:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.18. - - -File: libgomp.info, Node: omp_get_cancellation, Next: omp_get_default_device, Prev: omp_get_ancestor_thread_num, Up: Runtime Library Routines - -2.3 'omp_get_cancellation' - Whether cancellation support is enabled -==================================================================== - -_Description_: - This function returns 'true' if cancellation is activated, 'false' - otherwise. Here, 'true' and 'false' represent their - language-specific counterparts. Unless 'OMP_CANCELLATION' is set - true, cancellations are deactivated. - -_C/C++_: - _Prototype_: 'int omp_get_cancellation(void);' - -_Fortran_: - _Interface_: 'logical function omp_get_cancellation()' - -_See also_: - *note OMP_CANCELLATION:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.9. - - -File: libgomp.info, Node: omp_get_default_device, Next: omp_get_dynamic, Prev: omp_get_cancellation, Up: Runtime Library Routines - -2.4 'omp_get_default_device' - Get the default device for target regions -======================================================================== - -_Description_: - Get the default device for target regions without device clause. - -_C/C++_: - _Prototype_: 'int omp_get_default_device(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_default_device()' - -_See also_: - *note OMP_DEFAULT_DEVICE::, *note omp_set_default_device:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.24. - - -File: libgomp.info, Node: omp_get_dynamic, Next: omp_get_level, Prev: omp_get_default_device, Up: Runtime Library Routines - -2.5 'omp_get_dynamic' - Dynamic teams setting -============================================= - -_Description_: - This function returns 'true' if enabled, 'false' otherwise. Here, - 'true' and 'false' represent their language-specific counterparts. - - The dynamic team setting may be initialized at startup by the - 'OMP_DYNAMIC' environment variable or at runtime using - 'omp_set_dynamic'. If undefined, dynamic adjustment is disabled by - default. - -_C/C++_: - _Prototype_: 'int omp_get_dynamic(void);' - -_Fortran_: - _Interface_: 'logical function omp_get_dynamic()' - -_See also_: - *note omp_set_dynamic::, *note OMP_DYNAMIC:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.8. - - -File: libgomp.info, Node: omp_get_level, Next: omp_get_max_active_levels, Prev: omp_get_dynamic, Up: Runtime Library Routines - -2.6 'omp_get_level' - Obtain the current nesting level -====================================================== - -_Description_: - This function returns the nesting level for the parallel blocks, - which enclose the calling call. - -_C/C++_ - _Prototype_: 'int omp_get_level(void);' - -_Fortran_: - _Interface_: 'integer function omp_level()' - -_See also_: - *note omp_get_active_level:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.17. - - -File: libgomp.info, Node: omp_get_max_active_levels, Next: omp_get_max_threads, Prev: omp_get_level, Up: Runtime Library Routines - -2.7 'omp_get_max_active_levels' - Maximum number of active regions -================================================================== - -_Description_: - This function obtains the maximum allowed number of nested, active - parallel regions. - -_C/C++_ - _Prototype_: 'int omp_get_max_active_levels(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_max_active_levels()' - -_See also_: - *note omp_set_max_active_levels::, *note omp_get_active_level:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.16. - - -File: libgomp.info, Node: omp_get_max_threads, Next: omp_get_nested, Prev: omp_get_max_active_levels, Up: Runtime Library Routines - -2.8 'omp_get_max_threads' - Maximum number of threads of parallel region -======================================================================== - -_Description_: - Return the maximum number of threads used for the current parallel - region that does not use the clause 'num_threads'. - -_C/C++_: - _Prototype_: 'int omp_get_max_threads(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_max_threads()' - -_See also_: - *note omp_set_num_threads::, *note omp_set_dynamic::, *note - omp_get_thread_limit:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.3. - - -File: libgomp.info, Node: omp_get_nested, Next: omp_get_num_devices, Prev: omp_get_max_threads, Up: Runtime Library Routines - -2.9 'omp_get_nested' - Nested parallel regions -============================================== - -_Description_: - This function returns 'true' if nested parallel regions are - enabled, 'false' otherwise. Here, 'true' and 'false' represent - their language-specific counterparts. - - Nested parallel regions may be initialized at startup by the - 'OMP_NESTED' environment variable or at runtime using - 'omp_set_nested'. If undefined, nested parallel regions are - disabled by default. - -_C/C++_: - _Prototype_: 'int omp_get_nested(void);' - -_Fortran_: - _Interface_: 'logical function omp_get_nested()' - -_See also_: - *note omp_set_nested::, *note OMP_NESTED:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.11. - - -File: libgomp.info, Node: omp_get_num_devices, Next: omp_get_num_procs, Prev: omp_get_nested, Up: Runtime Library Routines - -2.10 'omp_get_num_devices' - Number of target devices -===================================================== - -_Description_: - Returns the number of target devices. - -_C/C++_: - _Prototype_: 'int omp_get_num_devices(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_num_devices()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.25. - - -File: libgomp.info, Node: omp_get_num_procs, Next: omp_get_num_teams, Prev: omp_get_num_devices, Up: Runtime Library Routines - -2.11 'omp_get_num_procs' - Number of processors online -====================================================== - -_Description_: - Returns the number of processors online on that device. - -_C/C++_: - _Prototype_: 'int omp_get_num_procs(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_num_procs()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.5. - - -File: libgomp.info, Node: omp_get_num_teams, Next: omp_get_num_threads, Prev: omp_get_num_procs, Up: Runtime Library Routines - -2.12 'omp_get_num_teams' - Number of teams -========================================== - -_Description_: - Returns the number of teams in the current team region. - -_C/C++_: - _Prototype_: 'int omp_get_num_teams(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_num_teams()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.26. - - -File: libgomp.info, Node: omp_get_num_threads, Next: omp_get_proc_bind, Prev: omp_get_num_teams, Up: Runtime Library Routines - -2.13 'omp_get_num_threads' - Size of the active team -==================================================== - -_Description_: - Returns the number of threads in the current team. In a sequential - section of the program 'omp_get_num_threads' returns 1. - - The default team size may be initialized at startup by the - 'OMP_NUM_THREADS' environment variable. At runtime, the size of - the current team may be set either by the 'NUM_THREADS' clause or - by 'omp_set_num_threads'. If none of the above were used to define - a specific value and 'OMP_DYNAMIC' is disabled, one thread per CPU - online is used. - -_C/C++_: - _Prototype_: 'int omp_get_num_threads(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_num_threads()' - -_See also_: - *note omp_get_max_threads::, *note omp_set_num_threads::, *note - OMP_NUM_THREADS:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.2. - - -File: libgomp.info, Node: omp_get_proc_bind, Next: omp_get_schedule, Prev: omp_get_num_threads, Up: Runtime Library Routines - -2.14 'omp_get_proc_bind' - Whether theads may be moved between CPUs -=================================================================== - -_Description_: - This functions returns the currently active thread affinity policy, - which is set via 'OMP_PROC_BIND'. Possible values are - 'omp_proc_bind_false', 'omp_proc_bind_true', - 'omp_proc_bind_master', 'omp_proc_bind_close' and - 'omp_proc_bind_spread'. - -_C/C++_: - _Prototype_: 'omp_proc_bind_t omp_get_proc_bind(void);' - -_Fortran_: - _Interface_: 'integer(kind=omp_proc_bind_kind) function - omp_get_proc_bind()' - -_See also_: - *note OMP_PROC_BIND::, *note OMP_PLACES::, *note - GOMP_CPU_AFFINITY::, - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.22. - - -File: libgomp.info, Node: omp_get_schedule, Next: omp_get_team_num, Prev: omp_get_proc_bind, Up: Runtime Library Routines - -2.15 'omp_get_schedule' - Obtain the runtime scheduling method -============================================================== - -_Description_: - Obtain the runtime scheduling method. The KIND argument will be - set to the value 'omp_sched_static', 'omp_sched_dynamic', - 'omp_sched_guided' or 'omp_sched_auto'. The second argument, - MODIFIER, is set to the chunk size. - -_C/C++_ - _Prototype_: 'void omp_get_schedule(omp_sched_t *kind, int - *modifier);' - -_Fortran_: - _Interface_: 'subroutine omp_get_schedule(kind, modifier)' - 'integer(kind=omp_sched_kind) kind' - 'integer modifier' - -_See also_: - *note omp_set_schedule::, *note OMP_SCHEDULE:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.13. - - -File: libgomp.info, Node: omp_get_team_num, Next: omp_get_team_size, Prev: omp_get_schedule, Up: Runtime Library Routines - -2.16 'omp_get_team_num' - Get team number -========================================= - -_Description_: - Returns the team number of the calling thread. - -_C/C++_: - _Prototype_: 'int omp_get_team_num(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_team_num()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.27. - - -File: libgomp.info, Node: omp_get_team_size, Next: omp_get_thread_limit, Prev: omp_get_team_num, Up: Runtime Library Routines - -2.17 'omp_get_team_size' - Number of threads in a team -====================================================== - -_Description_: - This function returns the number of threads in a thread team to - which either the current thread or its ancestor belongs. For - values of LEVEL outside zero to 'omp_get_level', -1 is returned; if - LEVEL is zero, 1 is returned, and for 'omp_get_level', the result - is identical to 'omp_get_num_threads'. - -_C/C++_: - _Prototype_: 'int omp_get_team_size(int level);' - -_Fortran_: - _Interface_: 'integer function omp_get_team_size(level)' - 'integer level' - -_See also_: - *note omp_get_num_threads::, *note omp_get_level::, *note - omp_get_ancestor_thread_num:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.19. - - -File: libgomp.info, Node: omp_get_thread_limit, Next: omp_get_thread_num, Prev: omp_get_team_size, Up: Runtime Library Routines - -2.18 'omp_get_thread_limit' - Maximum number of threads -======================================================= - -_Description_: - Return the maximum number of threads of the program. - -_C/C++_: - _Prototype_: 'int omp_get_thread_limit(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_thread_limit()' - -_See also_: - *note omp_get_max_threads::, *note OMP_THREAD_LIMIT:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.14. - - -File: libgomp.info, Node: omp_get_thread_num, Next: omp_in_parallel, Prev: omp_get_thread_limit, Up: Runtime Library Routines - -2.19 'omp_get_thread_num' - Current thread ID -============================================= - -_Description_: - Returns a unique thread identification number within the current - team. In a sequential parts of the program, 'omp_get_thread_num' - always returns 0. In parallel regions the return value varies from - 0 to 'omp_get_num_threads'-1 inclusive. The return value of the - master thread of a team is always 0. - -_C/C++_: - _Prototype_: 'int omp_get_thread_num(void);' - -_Fortran_: - _Interface_: 'integer function omp_get_thread_num()' - -_See also_: - *note omp_get_num_threads::, *note omp_get_ancestor_thread_num:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.4. - - -File: libgomp.info, Node: omp_in_parallel, Next: omp_in_final, Prev: omp_get_thread_num, Up: Runtime Library Routines - -2.20 'omp_in_parallel' - Whether a parallel region is active -============================================================ - -_Description_: - This function returns 'true' if currently running in parallel, - 'false' otherwise. Here, 'true' and 'false' represent their - language-specific counterparts. - -_C/C++_: - _Prototype_: 'int omp_in_parallel(void);' - -_Fortran_: - _Interface_: 'logical function omp_in_parallel()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.6. - - -File: libgomp.info, Node: omp_in_final, Next: omp_is_initial_device, Prev: omp_in_parallel, Up: Runtime Library Routines - -2.21 'omp_in_final' - Whether in final or included task region -============================================================== - -_Description_: - This function returns 'true' if currently running in a final or - included task region, 'false' otherwise. Here, 'true' and 'false' - represent their language-specific counterparts. - -_C/C++_: - _Prototype_: 'int omp_in_final(void);' - -_Fortran_: - _Interface_: 'logical function omp_in_final()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.21. - - -File: libgomp.info, Node: omp_is_initial_device, Next: omp_set_default_device, Prev: omp_in_final, Up: Runtime Library Routines - -2.22 'omp_is_initial_device' - Whether executing on the host device -=================================================================== - -_Description_: - This function returns 'true' if currently running on the host - device, 'false' otherwise. Here, 'true' and 'false' represent - their language-specific counterparts. - -_C/C++_: - _Prototype_: 'int omp_is_initial_device(void);' - -_Fortran_: - _Interface_: 'logical function omp_is_initial_device()' - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.28. - - -File: libgomp.info, Node: omp_set_default_device, Next: omp_set_dynamic, Prev: omp_is_initial_device, Up: Runtime Library Routines - -2.23 'omp_set_default_device' - Set the default device for target regions -========================================================================= - -_Description_: - Set the default device for target regions without device clause. - The argument shall be a nonnegative device number. - -_C/C++_: - _Prototype_: 'void omp_set_default_device(int device_num);' - -_Fortran_: - _Interface_: 'subroutine omp_set_default_device(device_num)' - 'integer device_num' - -_See also_: - *note OMP_DEFAULT_DEVICE::, *note omp_get_default_device:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.23. - - -File: libgomp.info, Node: omp_set_dynamic, Next: omp_set_max_active_levels, Prev: omp_set_default_device, Up: Runtime Library Routines - -2.24 'omp_set_dynamic' - Enable/disable dynamic teams -===================================================== - -_Description_: - Enable or disable the dynamic adjustment of the number of threads - within a team. The function takes the language-specific equivalent - of 'true' and 'false', where 'true' enables dynamic adjustment of - team sizes and 'false' disables it. - -_C/C++_: - _Prototype_: 'void omp_set_dynamic(int dynamic_threads);' - -_Fortran_: - _Interface_: 'subroutine omp_set_dynamic(dynamic_threads)' - 'logical, intent(in) :: dynamic_threads' - -_See also_: - *note OMP_DYNAMIC::, *note omp_get_dynamic:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.7. - - -File: libgomp.info, Node: omp_set_max_active_levels, Next: omp_set_nested, Prev: omp_set_dynamic, Up: Runtime Library Routines - -2.25 'omp_set_max_active_levels' - Limits the number of active parallel regions -=============================================================================== - -_Description_: - This function limits the maximum allowed number of nested, active - parallel regions. - -_C/C++_ - _Prototype_: 'void omp_set_max_active_levels(int max_levels);' - -_Fortran_: - _Interface_: 'subroutine omp_set_max_active_levels(max_levels)' - 'integer max_levels' - -_See also_: - *note omp_get_max_active_levels::, *note omp_get_active_level:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.15. - - -File: libgomp.info, Node: omp_set_nested, Next: omp_set_num_threads, Prev: omp_set_max_active_levels, Up: Runtime Library Routines - -2.26 'omp_set_nested' - Enable/disable nested parallel regions -============================================================== - -_Description_: - Enable or disable nested parallel regions, i.e., whether team - members are allowed to create new teams. The function takes the - language-specific equivalent of 'true' and 'false', where 'true' - enables dynamic adjustment of team sizes and 'false' disables it. - -_C/C++_: - _Prototype_: 'void omp_set_nested(int nested);' - -_Fortran_: - _Interface_: 'subroutine omp_set_nested(nested)' - 'logical, intent(in) :: nested' - -_See also_: - *note OMP_NESTED::, *note omp_get_nested:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.10. - - -File: libgomp.info, Node: omp_set_num_threads, Next: omp_set_schedule, Prev: omp_set_nested, Up: Runtime Library Routines - -2.27 'omp_set_num_threads' - Set upper team size limit -====================================================== - -_Description_: - Specifies the number of threads used by default in subsequent - parallel sections, if those do not specify a 'num_threads' clause. - The argument of 'omp_set_num_threads' shall be a positive integer. - -_C/C++_: - _Prototype_: 'void omp_set_num_threads(int num_threads);' - -_Fortran_: - _Interface_: 'subroutine omp_set_num_threads(num_threads)' - 'integer, intent(in) :: num_threads' - -_See also_: - *note OMP_NUM_THREADS::, *note omp_get_num_threads::, *note - omp_get_max_threads:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.1. - - -File: libgomp.info, Node: omp_set_schedule, Next: omp_init_lock, Prev: omp_set_num_threads, Up: Runtime Library Routines - -2.28 'omp_set_schedule' - Set the runtime scheduling method -=========================================================== - -_Description_: - Sets the runtime scheduling method. The KIND argument can have the - value 'omp_sched_static', 'omp_sched_dynamic', 'omp_sched_guided' - or 'omp_sched_auto'. Except for 'omp_sched_auto', the chunk size - is set to the value of MODIFIER if positive, or to the default - value if zero or negative. For 'omp_sched_auto' the MODIFIER - argument is ignored. - -_C/C++_ - _Prototype_: 'void omp_set_schedule(omp_sched_t kind, int modifier);' - -_Fortran_: - _Interface_: 'subroutine omp_set_schedule(kind, modifier)' - 'integer(kind=omp_sched_kind) kind' - 'integer modifier' - -_See also_: - *note omp_get_schedule:: *note OMP_SCHEDULE:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.2.12. - - -File: libgomp.info, Node: omp_init_lock, Next: omp_set_lock, Prev: omp_set_schedule, Up: Runtime Library Routines - -2.29 'omp_init_lock' - Initialize simple lock -============================================= - -_Description_: - Initialize a simple lock. After initialization, the lock is in an - unlocked state. - -_C/C++_: - _Prototype_: 'void omp_init_lock(omp_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_init_lock(svar)' - 'integer(omp_lock_kind), intent(out) :: svar' - -_See also_: - *note omp_destroy_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.1. - - -File: libgomp.info, Node: omp_set_lock, Next: omp_test_lock, Prev: omp_init_lock, Up: Runtime Library Routines - -2.30 'omp_set_lock' - Wait for and set simple lock -================================================== - -_Description_: - Before setting a simple lock, the lock variable must be initialized - by 'omp_init_lock'. The calling thread is blocked until the lock - is available. If the lock is already held by the current thread, a - deadlock occurs. - -_C/C++_: - _Prototype_: 'void omp_set_lock(omp_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_set_lock(svar)' - 'integer(omp_lock_kind), intent(inout) :: svar' - -_See also_: - *note omp_init_lock::, *note omp_test_lock::, *note - omp_unset_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.3. - - -File: libgomp.info, Node: omp_test_lock, Next: omp_unset_lock, Prev: omp_set_lock, Up: Runtime Library Routines - -2.31 'omp_test_lock' - Test and set simple lock if available -============================================================ - -_Description_: - Before setting a simple lock, the lock variable must be initialized - by 'omp_init_lock'. Contrary to 'omp_set_lock', 'omp_test_lock' - does not block if the lock is not available. This function returns - 'true' upon success, 'false' otherwise. Here, 'true' and 'false' - represent their language-specific counterparts. - -_C/C++_: - _Prototype_: 'int omp_test_lock(omp_lock_t *lock);' - -_Fortran_: - _Interface_: 'logical function omp_test_lock(svar)' - 'integer(omp_lock_kind), intent(inout) :: svar' - -_See also_: - *note omp_init_lock::, *note omp_set_lock::, *note omp_set_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.5. - - -File: libgomp.info, Node: omp_unset_lock, Next: omp_destroy_lock, Prev: omp_test_lock, Up: Runtime Library Routines - -2.32 'omp_unset_lock' - Unset simple lock -========================================= - -_Description_: - A simple lock about to be unset must have been locked by - 'omp_set_lock' or 'omp_test_lock' before. In addition, the lock - must be held by the thread calling 'omp_unset_lock'. Then, the - lock becomes unlocked. If one or more threads attempted to set the - lock before, one of them is chosen to, again, set the lock to - itself. - -_C/C++_: - _Prototype_: 'void omp_unset_lock(omp_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_unset_lock(svar)' - 'integer(omp_lock_kind), intent(inout) :: svar' - -_See also_: - *note omp_set_lock::, *note omp_test_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.4. - - -File: libgomp.info, Node: omp_destroy_lock, Next: omp_init_nest_lock, Prev: omp_unset_lock, Up: Runtime Library Routines - -2.33 'omp_destroy_lock' - Destroy simple lock -============================================= - -_Description_: - Destroy a simple lock. In order to be destroyed, a simple lock - must be in the unlocked state. - -_C/C++_: - _Prototype_: 'void omp_destroy_lock(omp_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_destroy_lock(svar)' - 'integer(omp_lock_kind), intent(inout) :: svar' - -_See also_: - *note omp_init_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.2. - - -File: libgomp.info, Node: omp_init_nest_lock, Next: omp_set_nest_lock, Prev: omp_destroy_lock, Up: Runtime Library Routines - -2.34 'omp_init_nest_lock' - Initialize nested lock -================================================== - -_Description_: - Initialize a nested lock. After initialization, the lock is in an - unlocked state and the nesting count is set to zero. - -_C/C++_: - _Prototype_: 'void omp_init_nest_lock(omp_nest_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_init_nest_lock(nvar)' - 'integer(omp_nest_lock_kind), intent(out) :: nvar' - -_See also_: - *note omp_destroy_nest_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.1. - - -File: libgomp.info, Node: omp_set_nest_lock, Next: omp_test_nest_lock, Prev: omp_init_nest_lock, Up: Runtime Library Routines - -2.35 'omp_set_nest_lock' - Wait for and set nested lock -======================================================= - -_Description_: - Before setting a nested lock, the lock variable must be initialized - by 'omp_init_nest_lock'. The calling thread is blocked until the - lock is available. If the lock is already held by the current - thread, the nesting count for the lock is incremented. - -_C/C++_: - _Prototype_: 'void omp_set_nest_lock(omp_nest_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_set_nest_lock(nvar)' - 'integer(omp_nest_lock_kind), intent(inout) :: nvar' - -_See also_: - *note omp_init_nest_lock::, *note omp_unset_nest_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.3. - - -File: libgomp.info, Node: omp_test_nest_lock, Next: omp_unset_nest_lock, Prev: omp_set_nest_lock, Up: Runtime Library Routines - -2.36 'omp_test_nest_lock' - Test and set nested lock if available -================================================================= - -_Description_: - Before setting a nested lock, the lock variable must be initialized - by 'omp_init_nest_lock'. Contrary to 'omp_set_nest_lock', - 'omp_test_nest_lock' does not block if the lock is not available. - If the lock is already held by the current thread, the new nesting - count is returned. Otherwise, the return value equals zero. - -_C/C++_: - _Prototype_: 'int omp_test_nest_lock(omp_nest_lock_t *lock);' - -_Fortran_: - _Interface_: 'logical function omp_test_nest_lock(nvar)' - 'integer(omp_nest_lock_kind), intent(inout) :: nvar' - -_See also_: - *note omp_init_lock::, *note omp_set_lock::, *note omp_set_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.5. - - -File: libgomp.info, Node: omp_unset_nest_lock, Next: omp_destroy_nest_lock, Prev: omp_test_nest_lock, Up: Runtime Library Routines - -2.37 'omp_unset_nest_lock' - Unset nested lock -============================================== - -_Description_: - A nested lock about to be unset must have been locked by - 'omp_set_nested_lock' or 'omp_test_nested_lock' before. In - addition, the lock must be held by the thread calling - 'omp_unset_nested_lock'. If the nesting count drops to zero, the - lock becomes unlocked. If one ore more threads attempted to set - the lock before, one of them is chosen to, again, set the lock to - itself. - -_C/C++_: - _Prototype_: 'void omp_unset_nest_lock(omp_nest_lock_t *lock);' - -_Fortran_: - _Interface_: 'subroutine omp_unset_nest_lock(nvar)' - 'integer(omp_nest_lock_kind), intent(inout) :: nvar' - -_See also_: - *note omp_set_nest_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.4. - - -File: libgomp.info, Node: omp_destroy_nest_lock, Next: omp_get_wtick, Prev: omp_unset_nest_lock, Up: Runtime Library Routines - -2.38 'omp_destroy_nest_lock' - Destroy nested lock -================================================== - -_Description_: - Destroy a nested lock. In order to be destroyed, a nested lock - must be in the unlocked state and its nesting count must equal - zero. - -_C/C++_: - _Prototype_: 'void omp_destroy_nest_lock(omp_nest_lock_t *);' - -_Fortran_: - _Interface_: 'subroutine omp_destroy_nest_lock(nvar)' - 'integer(omp_nest_lock_kind), intent(inout) :: nvar' - -_See also_: - *note omp_init_lock:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.3.2. - - -File: libgomp.info, Node: omp_get_wtick, Next: omp_get_wtime, Prev: omp_destroy_nest_lock, Up: Runtime Library Routines - -2.39 'omp_get_wtick' - Get timer precision -========================================== - -_Description_: - Gets the timer precision, i.e., the number of seconds between two - successive clock ticks. - -_C/C++_: - _Prototype_: 'double omp_get_wtick(void);' - -_Fortran_: - _Interface_: 'double precision function omp_get_wtick()' - -_See also_: - *note omp_get_wtime:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.4.2. - - -File: libgomp.info, Node: omp_get_wtime, Prev: omp_get_wtick, Up: Runtime Library Routines - -2.40 'omp_get_wtime' - Elapsed wall clock time -============================================== - -_Description_: - Elapsed wall clock time in seconds. The time is measured per - thread, no guarantee can be made that two distinct threads measure - the same time. Time is measured from some "time in the past", - which is an arbitrary time guaranteed not to change during the - execution of the program. - -_C/C++_: - _Prototype_: 'double omp_get_wtime(void);' - -_Fortran_: - _Interface_: 'double precision function omp_get_wtime()' - -_See also_: - *note omp_get_wtick:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 3.4.1. - - -File: libgomp.info, Node: Environment Variables, Next: The libgomp ABI, Prev: Runtime Library Routines, Up: Top - -3 Environment Variables -*********************** - -The environment variables which beginning with 'OMP_' are defined by -section 4 of the OpenMP specification in version 4.0, while those -beginning with 'GOMP_' are GNU extensions. - -* Menu: - -* OMP_CANCELLATION:: Set whether cancellation is activated -* OMP_DISPLAY_ENV:: Show OpenMP version and environment variables -* OMP_DEFAULT_DEVICE:: Set the device used in target regions -* OMP_DYNAMIC:: Dynamic adjustment of threads -* OMP_MAX_ACTIVE_LEVELS:: Set the maximum number of nested parallel regions -* OMP_NESTED:: Nested parallel regions -* OMP_NUM_THREADS:: Specifies the number of threads to use -* OMP_PROC_BIND:: Whether theads may be moved between CPUs -* OMP_PLACES:: Specifies on which CPUs the theads should be placed -* OMP_STACKSIZE:: Set default thread stack size -* OMP_SCHEDULE:: How threads are scheduled -* OMP_THREAD_LIMIT:: Set the maximum number of threads -* OMP_WAIT_POLICY:: How waiting threads are handled -* GOMP_CPU_AFFINITY:: Bind threads to specific CPUs -* GOMP_STACKSIZE:: Set default thread stack size -* GOMP_SPINCOUNT:: Set the busy-wait spin count - - -File: libgomp.info, Node: OMP_CANCELLATION, Next: OMP_DISPLAY_ENV, Up: Environment Variables - -3.1 'OMP_CANCELLATION' - Set whether cancellation is activated -============================================================== - -_Description_: - If set to 'TRUE', the cancellation is activated. If set to 'FALSE' - or if unset, cancellation is disabled and the 'cancel' construct is - ignored. - -_See also_: - *note omp_get_cancellation:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.11 - - -File: libgomp.info, Node: OMP_DISPLAY_ENV, Next: OMP_DEFAULT_DEVICE, Prev: OMP_CANCELLATION, Up: Environment Variables - -3.2 'OMP_DISPLAY_ENV' - Show OpenMP version and environment variables -===================================================================== - -_Description_: - If set to 'TRUE', the OpenMP version number and the values - associated with the OpenMP environment variables are printed to - 'stderr'. If set to 'VERBOSE', it additionally shows the value of - the environment variables which are GNU extensions. If undefined - or set to 'FALSE', this information will not be shown. - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.12 - - -File: libgomp.info, Node: OMP_DEFAULT_DEVICE, Next: OMP_DYNAMIC, Prev: OMP_DISPLAY_ENV, Up: Environment Variables - -3.3 'OMP_DEFAULT_DEVICE' - Set the device used in target regions -================================================================ - -_Description_: - Set to choose the device which is used in a 'target' region, unless - the value is overridden by 'omp_set_default_device' or by a - 'device' clause. The value shall be the nonnegative device number. - If no device with the given device number exists, the code is - executed on the host. If unset, device number 0 will be used. - -_See also_: - *note omp_get_default_device::, *note omp_set_default_device::, - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.11 - - -File: libgomp.info, Node: OMP_DYNAMIC, Next: OMP_MAX_ACTIVE_LEVELS, Prev: OMP_DEFAULT_DEVICE, Up: Environment Variables - -3.4 'OMP_DYNAMIC' - Dynamic adjustment of threads -================================================= - -_Description_: - Enable or disable the dynamic adjustment of the number of threads - within a team. The value of this environment variable shall be - 'TRUE' or 'FALSE'. If undefined, dynamic adjustment is disabled by - default. - -_See also_: - *note omp_set_dynamic:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.3 - - -File: libgomp.info, Node: OMP_MAX_ACTIVE_LEVELS, Next: OMP_NESTED, Prev: OMP_DYNAMIC, Up: Environment Variables - -3.5 'OMP_MAX_ACTIVE_LEVELS' - Set the maximum number of nested parallel regions -=============================================================================== - -_Description_: - Specifies the initial value for the maximum number of nested - parallel regions. The value of this variable shall be a positive - integer. If undefined, the number of active levels is unlimited. - -_See also_: - *note omp_set_max_active_levels:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.9 - - -File: libgomp.info, Node: OMP_NESTED, Next: OMP_NUM_THREADS, Prev: OMP_MAX_ACTIVE_LEVELS, Up: Environment Variables - -3.6 'OMP_NESTED' - Nested parallel regions -========================================== - -_Description_: - Enable or disable nested parallel regions, i.e., whether team - members are allowed to create new teams. The value of this - environment variable shall be 'TRUE' or 'FALSE'. If undefined, - nested parallel regions are disabled by default. - -_See also_: - *note omp_set_nested:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.6 - - -File: libgomp.info, Node: OMP_NUM_THREADS, Next: OMP_PLACES, Prev: OMP_NESTED, Up: Environment Variables - -3.7 'OMP_NUM_THREADS' - Specifies the number of threads to use -============================================================== - -_Description_: - Specifies the default number of threads to use in parallel regions. - The value of this variable shall be a comma-separated list of - positive integers; the value specified the number of threads to use - for the corresponding nested level. If undefined one thread per - CPU is used. - -_See also_: - *note omp_set_num_threads:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.2 - - -File: libgomp.info, Node: OMP_PLACES, Next: OMP_PROC_BIND, Prev: OMP_NUM_THREADS, Up: Environment Variables - -3.8 'OMP_PLACES' - Specifies on which CPUs the theads should be placed -====================================================================== - -_Description_: - The thread placement can be either specified using an abstract name - or by an explicit list of the places. The abstract names - 'threads', 'cores' and 'sockets' can be optionally followed by a - positive number in parentheses, which denotes the how many places - shall be created. With 'threads' each place corresponds to a - single hardware thread; 'cores' to a single core with the - corresponding number of hardware threads; and with 'sockets' the - place corresponds to a single socket. The resulting placement can - be shown by setting the 'OMP_DISPLAY_ENV' environment variable. - - Alternatively, the placement can be specified explicitly as - comma-separated list of places. A place is specified by set of - nonnegative numbers in curly braces, denoting the denoting the - hardware threads. The hardware threads belonging to a place can - either be specified as comma-separated list of nonnegative thread - numbers or using an interval. Multiple places can also be either - specified by a comma-separated list of places or by an interval. - To specify an interval, a colon followed by the count is placed - after after the hardware thread number or the place. Optionally, - the length can be followed by a colon and the stride number - - otherwise a unit stride is assumed. For instance, the following - specifies the same places list: '"{0,1,2}, {3,4,6}, {7,8,9}, - {10,11,12}"'; '"{0:3}, {3:3}, {7:3}, {10:3}"'; and '"{0:2}:4:3"'. - - If 'OMP_PLACES' and 'GOMP_CPU_AFFINITY' are unset and - 'OMP_PROC_BIND' is either unset or 'false', threads may be moved - between CPUs following no placement policy. - -_See also_: - *note OMP_PROC_BIND::, *note GOMP_CPU_AFFINITY::, *note - omp_get_proc_bind::, *note OMP_DISPLAY_ENV:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.5 - - -File: libgomp.info, Node: OMP_PROC_BIND, Next: OMP_SCHEDULE, Prev: OMP_PLACES, Up: Environment Variables - -3.9 'OMP_PROC_BIND' - Whether theads may be moved between CPUs -============================================================== - -_Description_: - Specifies whether threads may be moved between processors. If set - to 'TRUE', OpenMP theads should not be moved; if set to 'FALSE' - they may be moved. Alternatively, a comma separated list with the - values 'MASTER', 'CLOSE' and 'SPREAD' can be used to specify the - thread affinity policy for the corresponding nesting level. With - 'MASTER' the worker threads are in the same place partition as the - master thread. With 'CLOSE' those are kept close to the master - thread in contiguous place partitions. And with 'SPREAD' a sparse - distribution across the place partitions is used. - - When undefined, 'OMP_PROC_BIND' defaults to 'TRUE' when - 'OMP_PLACES' or 'GOMP_CPU_AFFINITY' is set and 'FALSE' otherwise. - -_See also_: - *note OMP_PLACES::, *note GOMP_CPU_AFFINITY::, *note - omp_get_proc_bind:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.4 - - -File: libgomp.info, Node: OMP_SCHEDULE, Next: OMP_STACKSIZE, Prev: OMP_PROC_BIND, Up: Environment Variables - -3.10 'OMP_SCHEDULE' - How threads are scheduled -=============================================== - -_Description_: - Allows to specify 'schedule type' and 'chunk size'. The value of - the variable shall have the form: 'type[,chunk]' where 'type' is - one of 'static', 'dynamic', 'guided' or 'auto' The optional 'chunk' - size shall be a positive integer. If undefined, dynamic scheduling - and a chunk size of 1 is used. - -_See also_: - *note omp_set_schedule:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Sections 2.7.1 - and 4.1 - - -File: libgomp.info, Node: OMP_STACKSIZE, Next: OMP_THREAD_LIMIT, Prev: OMP_SCHEDULE, Up: Environment Variables - -3.11 'OMP_STACKSIZE' - Set default thread stack size -==================================================== - -_Description_: - Set the default thread stack size in kilobytes, unless the number - is suffixed by 'B', 'K', 'M' or 'G', in which case the size is, - respectively, in bytes, kilobytes, megabytes or gigabytes. This is - different from 'pthread_attr_setstacksize' which gets the number of - bytes as an argument. If the stack size cannot be set due to - system constraints, an error is reported and the initial stack size - is left unchanged. If undefined, the stack size is system - dependent. - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.7 - - -File: libgomp.info, Node: OMP_THREAD_LIMIT, Next: OMP_WAIT_POLICY, Prev: OMP_STACKSIZE, Up: Environment Variables - -3.12 'OMP_THREAD_LIMIT' - Set the maximum number of threads -=========================================================== - -_Description_: - Specifies the number of threads to use for the whole program. The - value of this variable shall be a positive integer. If undefined, - the number of threads is not limited. - -_See also_: - *note OMP_NUM_THREADS::, *note omp_get_thread_limit:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.10 - - -File: libgomp.info, Node: OMP_WAIT_POLICY, Next: GOMP_CPU_AFFINITY, Prev: OMP_THREAD_LIMIT, Up: Environment Variables - -3.13 'OMP_WAIT_POLICY' - How waiting threads are handled -======================================================== - -_Description_: - Specifies whether waiting threads should be active or passive. If - the value is 'PASSIVE', waiting threads should not consume CPU - power while waiting; while the value is 'ACTIVE' specifies that - they should. If undefined, threads wait actively for a short time - before waiting passively. - -_See also_: - *note GOMP_SPINCOUNT:: - -_Reference_: - OpenMP specification v4.0 (http://www.openmp.org/), Section 4.8 - - -File: libgomp.info, Node: GOMP_CPU_AFFINITY, Next: GOMP_STACKSIZE, Prev: OMP_WAIT_POLICY, Up: Environment Variables - -3.14 'GOMP_CPU_AFFINITY' - Bind threads to specific CPUs -======================================================== - -_Description_: - Binds threads to specific CPUs. The variable should contain a - space-separated or comma-separated list of CPUs. This list may - contain different kinds of entries: either single CPU numbers in - any order, a range of CPUs (M-N) or a range with some stride - (M-N:S). CPU numbers are zero based. For example, - 'GOMP_CPU_AFFINITY="0 3 1-2 4-15:2"' will bind the initial thread - to CPU 0, the second to CPU 3, the third to CPU 1, the fourth to - CPU 2, the fifth to CPU 4, the sixth through tenth to CPUs 6, 8, - 10, 12, and 14 respectively and then start assigning back from the - beginning of the list. 'GOMP_CPU_AFFINITY=0' binds all threads to - CPU 0. - - There is no GNU OpenMP library routine to determine whether a CPU - affinity specification is in effect. As a workaround, - language-specific library functions, e.g., 'getenv' in C or - 'GET_ENVIRONMENT_VARIABLE' in Fortran, may be used to query the - setting of the 'GOMP_CPU_AFFINITY' environment variable. A defined - CPU affinity on startup cannot be changed or disabled during the - runtime of the application. - - If both 'GOMP_CPU_AFFINITY' and 'OMP_PROC_BIND' are set, - 'OMP_PROC_BIND' has a higher precedence. If neither has been set - and 'OMP_PROC_BIND' is unset, or when 'OMP_PROC_BIND' is set to - 'FALSE', the host system will handle the assignment of threads to - CPUs. - -_See also_: - *note OMP_PLACES::, *note OMP_PROC_BIND:: - - -File: libgomp.info, Node: GOMP_STACKSIZE, Next: GOMP_SPINCOUNT, Prev: GOMP_CPU_AFFINITY, Up: Environment Variables - -3.15 'GOMP_STACKSIZE' - Set default thread stack size -===================================================== - -_Description_: - Set the default thread stack size in kilobytes. This is different - from 'pthread_attr_setstacksize' which gets the number of bytes as - an argument. If the stack size cannot be set due to system - constraints, an error is reported and the initial stack size is - left unchanged. If undefined, the stack size is system dependent. - -_See also_: - *note OMP_STACKSIZE:: - -_Reference_: - GCC Patches Mailinglist - (http://gcc.gnu.org/ml/gcc-patches/2006-06/msg00493.html), GCC - Patches Mailinglist - (http://gcc.gnu.org/ml/gcc-patches/2006-06/msg00496.html) - - -File: libgomp.info, Node: GOMP_SPINCOUNT, Prev: GOMP_STACKSIZE, Up: Environment Variables - -3.16 'GOMP_SPINCOUNT' - Set the busy-wait spin count -==================================================== - -_Description_: - Determines how long a threads waits actively with consuming CPU - power before waiting passively without consuming CPU power. The - value may be either 'INFINITE', 'INFINITY' to always wait actively - or an integer which gives the number of spins of the busy-wait - loop. The integer may optionally be followed by the following - suffixes acting as multiplication factors: 'k' (kilo, thousand), - 'M' (mega, million), 'G' (giga, billion), or 'T' (tera, trillion). - If undefined, 0 is used when 'OMP_WAIT_POLICY' is 'PASSIVE', - 300,000 is used when 'OMP_WAIT_POLICY' is undefined and 30 billion - is used when 'OMP_WAIT_POLICY' is 'ACTIVE'. If there are more - OpenMP threads than available CPUs, 1000 and 100 spins are used for - 'OMP_WAIT_POLICY' being 'ACTIVE' or undefined, respectively; unless - the 'GOMP_SPINCOUNT' is lower or 'OMP_WAIT_POLICY' is 'PASSIVE'. - -_See also_: - *note OMP_WAIT_POLICY:: - - -File: libgomp.info, Node: The libgomp ABI, Next: Reporting Bugs, Prev: Environment Variables, Up: Top - -4 The libgomp ABI -***************** - -The following sections present notes on the external ABI as presented by -libgomp. Only maintainers should need them. - -* Menu: - -* Implementing MASTER construct:: -* Implementing CRITICAL construct:: -* Implementing ATOMIC construct:: -* Implementing FLUSH construct:: -* Implementing BARRIER construct:: -* Implementing THREADPRIVATE construct:: -* Implementing PRIVATE clause:: -* Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses:: -* Implementing REDUCTION clause:: -* Implementing PARALLEL construct:: -* Implementing FOR construct:: -* Implementing ORDERED construct:: -* Implementing SECTIONS construct:: -* Implementing SINGLE construct:: - - -File: libgomp.info, Node: Implementing MASTER construct, Next: Implementing CRITICAL construct, Up: The libgomp ABI - -4.1 Implementing MASTER construct -================================= - - if (omp_get_thread_num () == 0) - block - - Alternately, we generate two copies of the parallel subfunction and -only include this in the version run by the master thread. Surely this -is not worthwhile though... - - -File: libgomp.info, Node: Implementing CRITICAL construct, Next: Implementing ATOMIC construct, Prev: Implementing MASTER construct, Up: The libgomp ABI - -4.2 Implementing CRITICAL construct -=================================== - -Without a specified name, - - void GOMP_critical_start (void); - void GOMP_critical_end (void); - - so that we don't get COPY relocations from libgomp to the main -application. - - With a specified name, use omp_set_lock and omp_unset_lock with name -being transformed into a variable declared like - - omp_lock_t gomp_critical_user_<name> __attribute__((common)) - - Ideally the ABI would specify that all zero is a valid unlocked -state, and so we wouldn't need to initialize this at startup. - - -File: libgomp.info, Node: Implementing ATOMIC construct, Next: Implementing FLUSH construct, Prev: Implementing CRITICAL construct, Up: The libgomp ABI - -4.3 Implementing ATOMIC construct -================================= - -The target should implement the '__sync' builtins. - - Failing that we could add - - void GOMP_atomic_enter (void) - void GOMP_atomic_exit (void) - - which reuses the regular lock code, but with yet another lock object -private to the library. - - -File: libgomp.info, Node: Implementing FLUSH construct, Next: Implementing BARRIER construct, Prev: Implementing ATOMIC construct, Up: The libgomp ABI - -4.4 Implementing FLUSH construct -================================ - -Expands to the '__sync_synchronize' builtin. - - -File: libgomp.info, Node: Implementing BARRIER construct, Next: Implementing THREADPRIVATE construct, Prev: Implementing FLUSH construct, Up: The libgomp ABI - -4.5 Implementing BARRIER construct -================================== - - void GOMP_barrier (void) - - -File: libgomp.info, Node: Implementing THREADPRIVATE construct, Next: Implementing PRIVATE clause, Prev: Implementing BARRIER construct, Up: The libgomp ABI - -4.6 Implementing THREADPRIVATE construct -======================================== - -In _most_ cases we can map this directly to '__thread'. Except that OMP -allows constructors for C++ objects. We can either refuse to support -this (how often is it used?) or we can implement something akin to -.ctors. - - Even more ideally, this ctor feature is handled by extensions to the -main pthreads library. Failing that, we can have a set of entry points -to register ctor functions to be called. - - -File: libgomp.info, Node: Implementing PRIVATE clause, Next: Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses, Prev: Implementing THREADPRIVATE construct, Up: The libgomp ABI - -4.7 Implementing PRIVATE clause -=============================== - -In association with a PARALLEL, or within the lexical extent of a -PARALLEL block, the variable becomes a local variable in the parallel -subfunction. - - In association with FOR or SECTIONS blocks, create a new automatic -variable within the current function. This preserves the semantic of -new variable creation. - - -File: libgomp.info, Node: Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses, Next: Implementing REDUCTION clause, Prev: Implementing PRIVATE clause, Up: The libgomp ABI - -4.8 Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses -======================================================================== - -This seems simple enough for PARALLEL blocks. Create a private struct -for communicating between the parent and subfunction. In the parent, -copy in values for scalar and "small" structs; copy in addresses for -others TREE_ADDRESSABLE types. In the subfunction, copy the value into -the local variable. - - It is not clear what to do with bare FOR or SECTION blocks. The only -thing I can figure is that we do something like: - - #pragma omp for firstprivate(x) lastprivate(y) - for (int i = 0; i < n; ++i) - body; - - which becomes - - { - int x = x, y; - - // for stuff - - if (i == n) - y = y; - } - - where the "x=x" and "y=y" assignments actually have different uids -for the two variables, i.e. not something you could write directly in -C. Presumably this only makes sense if the "outer" x and y are global -variables. - - COPYPRIVATE would work the same way, except the structure broadcast -would have to happen via SINGLE machinery instead. - - -File: libgomp.info, Node: Implementing REDUCTION clause, Next: Implementing PARALLEL construct, Prev: Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses, Up: The libgomp ABI - -4.9 Implementing REDUCTION clause -================================= - -The private struct mentioned in the previous section should have a -pointer to an array of the type of the variable, indexed by the thread's -TEAM_ID. The thread stores its final value into the array, and after -the barrier, the master thread iterates over the array to collect the -values. - - -File: libgomp.info, Node: Implementing PARALLEL construct, Next: Implementing FOR construct, Prev: Implementing REDUCTION clause, Up: The libgomp ABI - -4.10 Implementing PARALLEL construct -==================================== - - #pragma omp parallel - { - body; - } - - becomes - - void subfunction (void *data) - { - use data; - body; - } - - setup data; - GOMP_parallel_start (subfunction, &data, num_threads); - subfunction (&data); - GOMP_parallel_end (); - - void GOMP_parallel_start (void (*fn)(void *), void *data, unsigned num_threads) - - The FN argument is the subfunction to be run in parallel. - - The DATA argument is a pointer to a structure used to communicate -data in and out of the subfunction, as discussed above with respect to -FIRSTPRIVATE et al. - - The NUM_THREADS argument is 1 if an IF clause is present and false, -or the value of the NUM_THREADS clause, if present, or 0. - - The function needs to create the appropriate number of threads and/or -launch them from the dock. It needs to create the team structure and -assign team ids. - - void GOMP_parallel_end (void) - - Tears down the team and returns us to the previous -'omp_in_parallel()' state. - - -File: libgomp.info, Node: Implementing FOR construct, Next: Implementing ORDERED construct, Prev: Implementing PARALLEL construct, Up: The libgomp ABI - -4.11 Implementing FOR construct -=============================== - - #pragma omp parallel for - for (i = lb; i <= ub; i++) - body; - - becomes - - void subfunction (void *data) - { - long _s0, _e0; - while (GOMP_loop_static_next (&_s0, &_e0)) - { - long _e1 = _e0, i; - for (i = _s0; i < _e1; i++) - body; - } - GOMP_loop_end_nowait (); - } - - GOMP_parallel_loop_static (subfunction, NULL, 0, lb, ub+1, 1, 0); - subfunction (NULL); - GOMP_parallel_end (); - - #pragma omp for schedule(runtime) - for (i = 0; i < n; i++) - body; - - becomes - - { - long i, _s0, _e0; - if (GOMP_loop_runtime_start (0, n, 1, &_s0, &_e0)) - do { - long _e1 = _e0; - for (i = _s0, i < _e0; i++) - body; - } while (GOMP_loop_runtime_next (&_s0, _&e0)); - GOMP_loop_end (); - } - - Note that while it looks like there is trickiness to propagating a -non-constant STEP, there isn't really. We're explicitly allowed to -evaluate it as many times as we want, and any variables involved should -automatically be handled as PRIVATE or SHARED like any other variables. -So the expression should remain evaluable in the subfunction. We can -also pull it into a local variable if we like, but since its supposed to -remain unchanged, we can also not if we like. - - If we have SCHEDULE(STATIC), and no ORDERED, then we ought to be able -to get away with no work-sharing context at all, since we can simply -perform the arithmetic directly in each thread to divide up the -iterations. Which would mean that we wouldn't need to call any of these -routines. - - There are separate routines for handling loops with an ORDERED -clause. Bookkeeping for that is non-trivial... - - -File: libgomp.info, Node: Implementing ORDERED construct, Next: Implementing SECTIONS construct, Prev: Implementing FOR construct, Up: The libgomp ABI - -4.12 Implementing ORDERED construct -=================================== - - void GOMP_ordered_start (void) - void GOMP_ordered_end (void) - - -File: libgomp.info, Node: Implementing SECTIONS construct, Next: Implementing SINGLE construct, Prev: Implementing ORDERED construct, Up: The libgomp ABI - -4.13 Implementing SECTIONS construct -==================================== - -A block as - - #pragma omp sections - { - #pragma omp section - stmt1; - #pragma omp section - stmt2; - #pragma omp section - stmt3; - } - - becomes - - for (i = GOMP_sections_start (3); i != 0; i = GOMP_sections_next ()) - switch (i) - { - case 1: - stmt1; - break; - case 2: - stmt2; - break; - case 3: - stmt3; - break; - } - GOMP_barrier (); - - -File: libgomp.info, Node: Implementing SINGLE construct, Prev: Implementing SECTIONS construct, Up: The libgomp ABI - -4.14 Implementing SINGLE construct -================================== - -A block like - - #pragma omp single - { - body; - } - - becomes - - if (GOMP_single_start ()) - body; - GOMP_barrier (); - - while - - #pragma omp single copyprivate(x) - body; - - becomes - - datap = GOMP_single_copy_start (); - if (datap == NULL) - { - body; - data.x = x; - GOMP_single_copy_end (&data); - } - else - x = datap->x; - GOMP_barrier (); - - -File: libgomp.info, Node: Reporting Bugs, Next: Copying, Prev: The libgomp ABI, Up: Top - -5 Reporting Bugs -**************** - -Bugs in the GNU OpenMP implementation should be reported via Bugzilla -(http://gcc.gnu.org/bugzilla/). For all cases, please add "openmp" to -the keywords field in the bug report. - - -File: libgomp.info, Node: Copying, Next: GNU Free Documentation License, Prev: Reporting Bugs, Up: Top - -GNU General Public License -************************** - - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - - Everyone is permitted to copy and distribute verbatim copies of this - license document, but changing it is not allowed. - -Preamble -======== - -The GNU General Public License is a free, copyleft license for software -and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program-to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - -TERMS AND CONDITIONS -==================== - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public - License. - - "Copyright" also means copyright-like laws that apply to other - kinds of works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this - License. Each licensee is addressed as "you". "Licensees" and - "recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the - work in a fashion requiring copyright permission, other than the - making of an exact copy. The resulting work is called a "modified - version" of the earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work - based on the Program. - - To "propagate" a work means to do anything with it that, without - permission, would make you directly or secondarily liable for - infringement under applicable copyright law, except executing it on - a computer or modifying a private copy. Propagation includes - copying, distribution (with or without modification), making - available to the public, and in some countries other activities as - well. - - To "convey" a work means any kind of propagation that enables other - parties to make or receive copies. Mere interaction with a user - through a computer network, with no transfer of a copy, is not - conveying. - - An interactive user interface displays "Appropriate Legal Notices" - to the extent that it includes a convenient and prominently visible - feature that (1) displays an appropriate copyright notice, and (2) - tells the user that there is no warranty for the work (except to - the extent that warranties are provided), that licensees may convey - the work under this License, and how to view a copy of this - License. If the interface presents a list of user commands or - options, such as a menu, a prominent item in the list meets this - criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work - for making modifications to it. "Object code" means any non-source - form of a work. - - A "Standard Interface" means an interface that either is an - official standard defined by a recognized standards body, or, in - the case of interfaces specified for a particular programming - language, one that is widely used among developers working in that - language. - - The "System Libraries" of an executable work include anything, - other than the work as a whole, that (a) is included in the normal - form of packaging a Major Component, but which is not part of that - Major Component, and (b) serves only to enable use of the work with - that Major Component, or to implement a Standard Interface for - which an implementation is available to the public in source code - form. A "Major Component", in this context, means a major - essential component (kernel, window system, and so on) of the - specific operating system (if any) on which the executable work - runs, or a compiler used to produce the work, or an object code - interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all - the source code needed to generate, install, and (for an executable - work) run the object code and to modify the work, including scripts - to control those activities. However, it does not include the - work's System Libraries, or general-purpose tools or generally - available free programs which are used unmodified in performing - those activities but which are not part of the work. For example, - Corresponding Source includes interface definition files associated - with source files for the work, and the source code for shared - libraries and dynamically linked subprograms that the work is - specifically designed to require, such as by intimate data - communication or control flow between those subprograms and other - parts of the work. - - The Corresponding Source need not include anything that users can - regenerate automatically from other parts of the Corresponding - Source. - - The Corresponding Source for a work in source code form is that - same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of - copyright on the Program, and are irrevocable provided the stated - conditions are met. This License explicitly affirms your unlimited - permission to run the unmodified Program. The output from running - a covered work is covered by this License only if the output, given - its content, constitutes a covered work. This License acknowledges - your rights of fair use or other equivalent, as provided by - copyright law. - - You may make, run and propagate covered works that you do not - convey, without conditions so long as your license otherwise - remains in force. You may convey covered works to others for the - sole purpose of having them make modifications exclusively for you, - or provide you with facilities for running those works, provided - that you comply with the terms of this License in conveying all - material for which you do not control copyright. Those thus making - or running the covered works for you must do so exclusively on your - behalf, under your direction and control, on terms that prohibit - them from making any copies of your copyrighted material outside - their relationship with you. - - Conveying under any other circumstances is permitted solely under - the conditions stated below. Sublicensing is not allowed; section - 10 makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological - measure under any applicable law fulfilling obligations under - article 11 of the WIPO copyright treaty adopted on 20 December - 1996, or similar laws prohibiting or restricting circumvention of - such measures. - - When you convey a covered work, you waive any legal power to forbid - circumvention of technological measures to the extent such - circumvention is effected by exercising rights under this License - with respect to the covered work, and you disclaim any intention to - limit operation or modification of the work as a means of - enforcing, against the work's users, your or third parties' legal - rights to forbid circumvention of technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you - receive it, in any medium, provided that you conspicuously and - appropriately publish on each copy an appropriate copyright notice; - keep intact all notices stating that this License and any - non-permissive terms added in accord with section 7 apply to the - code; keep intact all notices of the absence of any warranty; and - give all recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, - and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to - produce it from the Program, in the form of source code under the - terms of section 4, provided that you also meet all of these - conditions: - - a. The work must carry prominent notices stating that you - modified it, and giving a relevant date. - - b. The work must carry prominent notices stating that it is - released under this License and any conditions added under - section 7. This requirement modifies the requirement in - section 4 to "keep intact all notices". - - c. You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable - section 7 additional terms, to the whole of the work, and all - its parts, regardless of how they are packaged. This License - gives no permission to license the work in any other way, but - it does not invalidate such permission if you have separately - received it. - - d. If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has - interactive interfaces that do not display Appropriate Legal - Notices, your work need not make them do so. - - A compilation of a covered work with other separate and independent - works, which are not by their nature extensions of the covered - work, and which are not combined with it such as to form a larger - program, in or on a volume of a storage or distribution medium, is - called an "aggregate" if the compilation and its resulting - copyright are not used to limit the access or legal rights of the - compilation's users beyond what the individual works permit. - Inclusion of a covered work in an aggregate does not cause this - License to apply to the other parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms - of sections 4 and 5, provided that you also convey the - machine-readable Corresponding Source under the terms of this - License, in one of these ways: - - a. Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b. Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that - product model, to give anyone who possesses the object code - either (1) a copy of the Corresponding Source for all the - software in the product that is covered by this License, on a - durable physical medium customarily used for software - interchange, for a price no more than your reasonable cost of - physically performing this conveying of source, or (2) access - to copy the Corresponding Source from a network server at no - charge. - - c. Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, - and only if you received the object code with such an offer, - in accord with subsection 6b. - - d. Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to - the Corresponding Source in the same way through the same - place at no further charge. You need not require recipients - to copy the Corresponding Source along with the object code. - If the place to copy the object code is a network server, the - Corresponding Source may be on a different server (operated by - you or a third party) that supports equivalent copying - facilities, provided you maintain clear directions next to the - object code saying where to find the Corresponding Source. - Regardless of what server hosts the Corresponding Source, you - remain obligated to ensure that it is available for as long as - needed to satisfy these requirements. - - e. Convey the object code using peer-to-peer transmission, - provided you inform other peers where the object code and - Corresponding Source of the work are being offered to the - general public at no charge under subsection 6d. - - A separable portion of the object code, whose source code is - excluded from the Corresponding Source as a System Library, need - not be included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means - any tangible personal property which is normally used for personal, - family, or household purposes, or (2) anything designed or sold for - incorporation into a dwelling. In determining whether a product is - a consumer product, doubtful cases shall be resolved in favor of - coverage. For a particular product received by a particular user, - "normally used" refers to a typical or common use of that class of - product, regardless of the status of the particular user or of the - way in which the particular user actually uses, or expects or is - expected to use, the product. A product is a consumer product - regardless of whether the product has substantial commercial, - industrial or non-consumer uses, unless such uses represent the - only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, - procedures, authorization keys, or other information required to - install and execute modified versions of a covered work in that - User Product from a modified version of its Corresponding Source. - The information must suffice to ensure that the continued - functioning of the modified object code is in no case prevented or - interfered with solely because modification has been made. - - If you convey an object code work under this section in, or with, - or specifically for use in, a User Product, and the conveying - occurs as part of a transaction in which the right of possession - and use of the User Product is transferred to the recipient in - perpetuity or for a fixed term (regardless of how the transaction - is characterized), the Corresponding Source conveyed under this - section must be accompanied by the Installation Information. But - this requirement does not apply if neither you nor any third party - retains the ability to install modified object code on the User - Product (for example, the work has been installed in ROM). - - The requirement to provide Installation Information does not - include a requirement to continue to provide support service, - warranty, or updates for a work that has been modified or installed - by the recipient, or for the User Product in which it has been - modified or installed. Access to a network may be denied when the - modification itself materially and adversely affects the operation - of the network or violates the rules and protocols for - communication across the network. - - Corresponding Source conveyed, and Installation Information - provided, in accord with this section must be in a format that is - publicly documented (and with an implementation available to the - public in source code form), and must require no special password - or key for unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of - this License by making exceptions from one or more of its - conditions. Additional permissions that are applicable to the - entire Program shall be treated as though they were included in - this License, to the extent that they are valid under applicable - law. If additional permissions apply only to part of the Program, - that part may be used separately under those permissions, but the - entire Program remains governed by this License without regard to - the additional permissions. - - When you convey a copy of a covered work, you may at your option - remove any additional permissions from that copy, or from any part - of it. (Additional permissions may be written to require their own - removal in certain cases when you modify the work.) You may place - additional permissions on material, added by you to a covered work, - for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material - you add to a covered work, you may (if authorized by the copyright - holders of that material) supplement the terms of this License with - terms: - - a. Disclaiming warranty or limiting liability differently from - the terms of sections 15 and 16 of this License; or - - b. Requiring preservation of specified reasonable legal notices - or author attributions in that material or in the Appropriate - Legal Notices displayed by works containing it; or - - c. Prohibiting misrepresentation of the origin of that material, - or requiring that modified versions of such material be marked - in reasonable ways as different from the original version; or - - d. Limiting the use for publicity purposes of names of licensors - or authors of the material; or - - e. Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f. Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified - versions of it) with contractual assumptions of liability to - the recipient, for any liability that these contractual - assumptions directly impose on those licensors and authors. - - All other non-permissive additional terms are considered "further - restrictions" within the meaning of section 10. If the Program as - you received it, or any part of it, contains a notice stating that - it is governed by this License along with a term that is a further - restriction, you may remove that term. If a license document - contains a further restriction but permits relicensing or conveying - under this License, you may add to a covered work material governed - by the terms of that license document, provided that the further - restriction does not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you - must place, in the relevant source files, a statement of the - additional terms that apply to those files, or a notice indicating - where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in - the form of a separately written license, or stated as exceptions; - the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly - provided under this License. Any attempt otherwise to propagate or - modify it is void, and will automatically terminate your rights - under this License (including any patent licenses granted under the - third paragraph of section 11). - - However, if you cease all violation of this License, then your - license from a particular copyright holder is reinstated (a) - provisionally, unless and until the copyright holder explicitly and - finally terminates your license, and (b) permanently, if the - copyright holder fails to notify you of the violation by some - reasonable means prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is - reinstated permanently if the copyright holder notifies you of the - violation by some reasonable means, this is the first time you have - received notice of violation of this License (for any work) from - that copyright holder, and you cure the violation prior to 30 days - after your receipt of the notice. - - Termination of your rights under this section does not terminate - the licenses of parties who have received copies or rights from you - under this License. If your rights have been terminated and not - permanently reinstated, you do not qualify to receive new licenses - for the same material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or - run a copy of the Program. Ancillary propagation of a covered work - occurring solely as a consequence of using peer-to-peer - transmission to receive a copy likewise does not require - acceptance. However, nothing other than this License grants you - permission to propagate or modify any covered work. These actions - infringe copyright if you do not accept this License. Therefore, - by modifying or propagating a covered work, you indicate your - acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically - receives a license from the original licensors, to run, modify and - propagate that work, subject to this License. You are not - responsible for enforcing compliance by third parties with this - License. - - An "entity transaction" is a transaction transferring control of an - organization, or substantially all assets of one, or subdividing an - organization, or merging organizations. If propagation of a - covered work results from an entity transaction, each party to that - transaction who receives a copy of the work also receives whatever - licenses to the work the party's predecessor in interest had or - could give under the previous paragraph, plus a right to possession - of the Corresponding Source of the work from the predecessor in - interest, if the predecessor has it or can get it with reasonable - efforts. - - You may not impose any further restrictions on the exercise of the - rights granted or affirmed under this License. For example, you - may not impose a license fee, royalty, or other charge for exercise - of rights granted under this License, and you may not initiate - litigation (including a cross-claim or counterclaim in a lawsuit) - alleging that any patent claim is infringed by making, using, - selling, offering for sale, or importing the Program or any portion - of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this - License of the Program or a work on which the Program is based. - The work thus licensed is called the contributor's "contributor - version". - - A contributor's "essential patent claims" are all patent claims - owned or controlled by the contributor, whether already acquired or - hereafter acquired, that would be infringed by some manner, - permitted by this License, of making, using, or selling its - contributor version, but do not include claims that would be - infringed only as a consequence of further modification of the - contributor version. For purposes of this definition, "control" - includes the right to grant patent sublicenses in a manner - consistent with the requirements of this License. - - Each contributor grants you a non-exclusive, worldwide, - royalty-free patent license under the contributor's essential - patent claims, to make, use, sell, offer for sale, import and - otherwise run, modify and propagate the contents of its contributor - version. - - In the following three paragraphs, a "patent license" is any - express agreement or commitment, however denominated, not to - enforce a patent (such as an express permission to practice a - patent or covenant not to sue for patent infringement). To "grant" - such a patent license to a party means to make such an agreement or - commitment not to enforce a patent against the party. - - If you convey a covered work, knowingly relying on a patent - license, and the Corresponding Source of the work is not available - for anyone to copy, free of charge and under the terms of this - License, through a publicly available network server or other - readily accessible means, then you must either (1) cause the - Corresponding Source to be so available, or (2) arrange to deprive - yourself of the benefit of the patent license for this particular - work, or (3) arrange, in a manner consistent with the requirements - of this License, to extend the patent license to downstream - recipients. "Knowingly relying" means you have actual knowledge - that, but for the patent license, your conveying the covered work - in a country, or your recipient's use of the covered work in a - country, would infringe one or more identifiable patents in that - country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or - arrangement, you convey, or propagate by procuring conveyance of, a - covered work, and grant a patent license to some of the parties - receiving the covered work authorizing them to use, propagate, - modify or convey a specific copy of the covered work, then the - patent license you grant is automatically extended to all - recipients of the covered work and works based on it. - - A patent license is "discriminatory" if it does not include within - the scope of its coverage, prohibits the exercise of, or is - conditioned on the non-exercise of one or more of the rights that - are specifically granted under this License. You may not convey a - covered work if you are a party to an arrangement with a third - party that is in the business of distributing software, under which - you make payment to the third party based on the extent of your - activity of conveying the work, and under which the third party - grants, to any of the parties who would receive the covered work - from you, a discriminatory patent license (a) in connection with - copies of the covered work conveyed by you (or copies made from - those copies), or (b) primarily for and in connection with specific - products or compilations that contain the covered work, unless you - entered into that arrangement, or that patent license was granted, - prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting - any implied license or other defenses to infringement that may - otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement - or otherwise) that contradict the conditions of this License, they - do not excuse you from the conditions of this License. If you - cannot convey a covered work so as to satisfy simultaneously your - obligations under this License and any other pertinent obligations, - then as a consequence you may not convey it at all. For example, - if you agree to terms that obligate you to collect a royalty for - further conveying from those to whom you convey the Program, the - only way you could satisfy both those terms and this License would - be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have - permission to link or combine any covered work with a work licensed - under version 3 of the GNU Affero General Public License into a - single combined work, and to convey the resulting work. The terms - of this License will continue to apply to the part which is the - covered work, but the special requirements of the GNU Affero - General Public License, section 13, concerning interaction through - a network will apply to the combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new - versions of the GNU General Public License from time to time. Such - new versions will be similar in spirit to the present version, but - may differ in detail to address new problems or concerns. - - Each version is given a distinguishing version number. If the - Program specifies that a certain numbered version of the GNU - General Public License "or any later version" applies to it, you - have the option of following the terms and conditions either of - that numbered version or of any later version published by the Free - Software Foundation. If the Program does not specify a version - number of the GNU General Public License, you may choose any - version ever published by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future - versions of the GNU General Public License can be used, that - proxy's public statement of acceptance of a version permanently - authorizes you to choose that version for the Program. - - Later license versions may give you additional or different - permissions. However, no additional obligations are imposed on any - author or copyright holder as a result of your choosing to follow a - later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY - APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE - COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" - WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, - INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE - RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. - SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL - NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN - WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES - AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR - DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR - CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE - THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA - BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD - PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER - PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF - THE POSSIBILITY OF SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided - above cannot be given local legal effect according to their terms, - reviewing courts shall apply local law that most closely - approximates an absolute waiver of all civil liability in - connection with the Program, unless a warranty or assumption of - liability accompanies a copy of the Program in return for a fee. - -END OF TERMS AND CONDITIONS -=========================== - -How to Apply These Terms to Your New Programs -============================================= - -If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these -terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least the -"copyright" line and a pointer to where the full notice is found. - - ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES. - Copyright (C) YEAR NAME OF AUTHOR - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or (at - your option) any later version. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - - Also add information on how to contact you by electronic and paper -mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - PROGRAM Copyright (C) YEAR NAME OF AUTHOR - This program comes with ABSOLUTELY NO WARRANTY; for details type 'show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type 'show c' for details. - - The hypothetical commands 'show w' and 'show c' should show the -appropriate parts of the General Public License. Of course, your -program's commands might be different; for a GUI interface, you would -use an "about box". - - You should also get your employer (if you work as a programmer) or -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. For more information on this, and how to apply and follow -the GNU GPL, see <http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your -program into proprietary programs. If your program is a subroutine -library, you may consider it more useful to permit linking proprietary -applications with the library. If this is what you want to do, use the -GNU Lesser General Public License instead of this License. But first, -please read <http://www.gnu.org/philosophy/why-not-lgpl.html>. - - -File: libgomp.info, Node: GNU Free Documentation License, Next: Funding, Prev: Copying, Up: Top - -GNU Free Documentation License -****************************** - - Version 1.3, 3 November 2008 - - Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. - <http://fsf.org/> - - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - 0. PREAMBLE - - The purpose of this License is to make a manual, textbook, or other - functional and useful document "free" in the sense of freedom: to - assure everyone the effective freedom to copy and redistribute it, - with or without modifying it, either commercially or - noncommercially. Secondarily, this License preserves for the - author and publisher a way to get credit for their work, while not - being considered responsible for modifications made by others. - - This License is a kind of "copyleft", which means that derivative - works of the document must themselves be free in the same sense. - It complements the GNU General Public License, which is a copyleft - license designed for free software. - - We have designed this License in order to use it for manuals for - free software, because free software needs free documentation: a - free program should come with manuals providing the same freedoms - that the software does. But this License is not limited to - software manuals; it can be used for any textual work, regardless - of subject matter or whether it is published as a printed book. We - recommend this License principally for works whose purpose is - instruction or reference. - - 1. APPLICABILITY AND DEFINITIONS - - This License applies to any manual or other work, in any medium, - that contains a notice placed by the copyright holder saying it can - be distributed under the terms of this License. Such a notice - grants a world-wide, royalty-free license, unlimited in duration, - to use that work under the conditions stated herein. The - "Document", below, refers to any such manual or work. Any member - of the public is a licensee, and is addressed as "you". You accept - the license if you copy, modify or distribute the work in a way - requiring permission under copyright law. - - A "Modified Version" of the Document means any work containing the - Document or a portion of it, either copied verbatim, or with - modifications and/or translated into another language. - - A "Secondary Section" is a named appendix or a front-matter section - of the Document that deals exclusively with the relationship of the - publishers or authors of the Document to the Document's overall - subject (or to related matters) and contains nothing that could - fall directly within that overall subject. (Thus, if the Document - is in part a textbook of mathematics, a Secondary Section may not - explain any mathematics.) The relationship could be a matter of - historical connection with the subject or with related matters, or - of legal, commercial, philosophical, ethical or political position - regarding them. - - The "Invariant Sections" are certain Secondary Sections whose - titles are designated, as being those of Invariant Sections, in the - notice that says that the Document is released under this License. - If a section does not fit the above definition of Secondary then it - is not allowed to be designated as Invariant. The Document may - contain zero Invariant Sections. If the Document does not identify - any Invariant Sections then there are none. - - The "Cover Texts" are certain short passages of text that are - listed, as Front-Cover Texts or Back-Cover Texts, in the notice - that says that the Document is released under this License. A - Front-Cover Text may be at most 5 words, and a Back-Cover Text may - be at most 25 words. - - A "Transparent" copy of the Document means a machine-readable copy, - represented in a format whose specification is available to the - general public, that is suitable for revising the document - straightforwardly with generic text editors or (for images composed - of pixels) generic paint programs or (for drawings) some widely - available drawing editor, and that is suitable for input to text - formatters or for automatic translation to a variety of formats - suitable for input to text formatters. A copy made in an otherwise - Transparent file format whose markup, or absence of markup, has - been arranged to thwart or discourage subsequent modification by - readers is not Transparent. An image format is not Transparent if - used for any substantial amount of text. A copy that is not - "Transparent" is called "Opaque". - - Examples of suitable formats for Transparent copies include plain - ASCII without markup, Texinfo input format, LaTeX input format, - SGML or XML using a publicly available DTD, and standard-conforming - simple HTML, PostScript or PDF designed for human modification. - Examples of transparent image formats include PNG, XCF and JPG. - Opaque formats include proprietary formats that can be read and - edited only by proprietary word processors, SGML or XML for which - the DTD and/or processing tools are not generally available, and - the machine-generated HTML, PostScript or PDF produced by some word - processors for output purposes only. - - The "Title Page" means, for a printed book, the title page itself, - plus such following pages as are needed to hold, legibly, the - material this License requires to appear in the title page. For - works in formats which do not have any title page as such, "Title - Page" means the text near the most prominent appearance of the - work's title, preceding the beginning of the body of the text. - - The "publisher" means any person or entity that distributes copies - of the Document to the public. - - A section "Entitled XYZ" means a named subunit of the Document - whose title either is precisely XYZ or contains XYZ in parentheses - following text that translates XYZ in another language. (Here XYZ - stands for a specific section name mentioned below, such as - "Acknowledgements", "Dedications", "Endorsements", or "History".) - To "Preserve the Title" of such a section when you modify the - Document means that it remains a section "Entitled XYZ" according - to this definition. - - The Document may include Warranty Disclaimers next to the notice - which states that this License applies to the Document. These - Warranty Disclaimers are considered to be included by reference in - this License, but only as regards disclaiming warranties: any other - implication that these Warranty Disclaimers may have is void and - has no effect on the meaning of this License. - - 2. VERBATIM COPYING - - You may copy and distribute the Document in any medium, either - commercially or noncommercially, provided that this License, the - copyright notices, and the license notice saying this License - applies to the Document are reproduced in all copies, and that you - add no other conditions whatsoever to those of this License. You - may not use technical measures to obstruct or control the reading - or further copying of the copies you make or distribute. However, - you may accept compensation in exchange for copies. If you - distribute a large enough number of copies you must also follow the - conditions in section 3. - - You may also lend copies, under the same conditions stated above, - and you may publicly display copies. - - 3. COPYING IN QUANTITY - - If you publish printed copies (or copies in media that commonly - have printed covers) of the Document, numbering more than 100, and - the Document's license notice requires Cover Texts, you must - enclose the copies in covers that carry, clearly and legibly, all - these Cover Texts: Front-Cover Texts on the front cover, and - Back-Cover Texts on the back cover. Both covers must also clearly - and legibly identify you as the publisher of these copies. The - front cover must present the full title with all words of the title - equally prominent and visible. You may add other material on the - covers in addition. Copying with changes limited to the covers, as - long as they preserve the title of the Document and satisfy these - conditions, can be treated as verbatim copying in other respects. - - If the required texts for either cover are too voluminous to fit - legibly, you should put the first ones listed (as many as fit - reasonably) on the actual cover, and continue the rest onto - adjacent pages. - - If you publish or distribute Opaque copies of the Document - numbering more than 100, you must either include a machine-readable - Transparent copy along with each Opaque copy, or state in or with - each Opaque copy a computer-network location from which the general - network-using public has access to download using public-standard - network protocols a complete Transparent copy of the Document, free - of added material. If you use the latter option, you must take - reasonably prudent steps, when you begin distribution of Opaque - copies in quantity, to ensure that this Transparent copy will - remain thus accessible at the stated location until at least one - year after the last time you distribute an Opaque copy (directly or - through your agents or retailers) of that edition to the public. - - It is requested, but not required, that you contact the authors of - the Document well before redistributing any large number of copies, - to give them a chance to provide you with an updated version of the - Document. - - 4. MODIFICATIONS - - You may copy and distribute a Modified Version of the Document - under the conditions of sections 2 and 3 above, provided that you - release the Modified Version under precisely this License, with the - Modified Version filling the role of the Document, thus licensing - distribution and modification of the Modified Version to whoever - possesses a copy of it. In addition, you must do these things in - the Modified Version: - - A. Use in the Title Page (and on the covers, if any) a title - distinct from that of the Document, and from those of previous - versions (which should, if there were any, be listed in the - History section of the Document). You may use the same title - as a previous version if the original publisher of that - version gives permission. - - B. List on the Title Page, as authors, one or more persons or - entities responsible for authorship of the modifications in - the Modified Version, together with at least five of the - principal authors of the Document (all of its principal - authors, if it has fewer than five), unless they release you - from this requirement. - - C. State on the Title page the name of the publisher of the - Modified Version, as the publisher. - - D. Preserve all the copyright notices of the Document. - - E. Add an appropriate copyright notice for your modifications - adjacent to the other copyright notices. - - F. Include, immediately after the copyright notices, a license - notice giving the public permission to use the Modified - Version under the terms of this License, in the form shown in - the Addendum below. - - G. Preserve in that license notice the full lists of Invariant - Sections and required Cover Texts given in the Document's - license notice. - - H. Include an unaltered copy of this License. - - I. Preserve the section Entitled "History", Preserve its Title, - and add to it an item stating at least the title, year, new - authors, and publisher of the Modified Version as given on the - Title Page. If there is no section Entitled "History" in the - Document, create one stating the title, year, authors, and - publisher of the Document as given on its Title Page, then add - an item describing the Modified Version as stated in the - previous sentence. - - J. Preserve the network location, if any, given in the Document - for public access to a Transparent copy of the Document, and - likewise the network locations given in the Document for - previous versions it was based on. These may be placed in the - "History" section. You may omit a network location for a work - that was published at least four years before the Document - itself, or if the original publisher of the version it refers - to gives permission. - - K. For any section Entitled "Acknowledgements" or "Dedications", - Preserve the Title of the section, and preserve in the section - all the substance and tone of each of the contributor - acknowledgements and/or dedications given therein. - - L. Preserve all the Invariant Sections of the Document, unaltered - in their text and in their titles. Section numbers or the - equivalent are not considered part of the section titles. - - M. Delete any section Entitled "Endorsements". Such a section - may not be included in the Modified Version. - - N. Do not retitle any existing section to be Entitled - "Endorsements" or to conflict in title with any Invariant - Section. - - O. Preserve any Warranty Disclaimers. - - If the Modified Version includes new front-matter sections or - appendices that qualify as Secondary Sections and contain no - material copied from the Document, you may at your option designate - some or all of these sections as invariant. To do this, add their - titles to the list of Invariant Sections in the Modified Version's - license notice. These titles must be distinct from any other - section titles. - - You may add a section Entitled "Endorsements", provided it contains - nothing but endorsements of your Modified Version by various - parties--for example, statements of peer review or that the text - has been approved by an organization as the authoritative - definition of a standard. - - You may add a passage of up to five words as a Front-Cover Text, - and a passage of up to 25 words as a Back-Cover Text, to the end of - the list of Cover Texts in the Modified Version. Only one passage - of Front-Cover Text and one of Back-Cover Text may be added by (or - through arrangements made by) any one entity. If the Document - already includes a cover text for the same cover, previously added - by you or by arrangement made by the same entity you are acting on - behalf of, you may not add another; but you may replace the old - one, on explicit permission from the previous publisher that added - the old one. - - The author(s) and publisher(s) of the Document do not by this - License give permission to use their names for publicity for or to - assert or imply endorsement of any Modified Version. - - 5. COMBINING DOCUMENTS - - You may combine the Document with other documents released under - this License, under the terms defined in section 4 above for - modified versions, provided that you include in the combination all - of the Invariant Sections of all of the original documents, - unmodified, and list them all as Invariant Sections of your - combined work in its license notice, and that you preserve all - their Warranty Disclaimers. - - The combined work need only contain one copy of this License, and - multiple identical Invariant Sections may be replaced with a single - copy. If there are multiple Invariant Sections with the same name - but different contents, make the title of each such section unique - by adding at the end of it, in parentheses, the name of the - original author or publisher of that section if known, or else a - unique number. Make the same adjustment to the section titles in - the list of Invariant Sections in the license notice of the - combined work. - - In the combination, you must combine any sections Entitled - "History" in the various original documents, forming one section - Entitled "History"; likewise combine any sections Entitled - "Acknowledgements", and any sections Entitled "Dedications". You - must delete all sections Entitled "Endorsements." - - 6. COLLECTIONS OF DOCUMENTS - - You may make a collection consisting of the Document and other - documents released under this License, and replace the individual - copies of this License in the various documents with a single copy - that is included in the collection, provided that you follow the - rules of this License for verbatim copying of each of the documents - in all other respects. - - You may extract a single document from such a collection, and - distribute it individually under this License, provided you insert - a copy of this License into the extracted document, and follow this - License in all other respects regarding verbatim copying of that - document. - - 7. AGGREGATION WITH INDEPENDENT WORKS - - A compilation of the Document or its derivatives with other - separate and independent documents or works, in or on a volume of a - storage or distribution medium, is called an "aggregate" if the - copyright resulting from the compilation is not used to limit the - legal rights of the compilation's users beyond what the individual - works permit. When the Document is included in an aggregate, this - License does not apply to the other works in the aggregate which - are not themselves derivative works of the Document. - - If the Cover Text requirement of section 3 is applicable to these - copies of the Document, then if the Document is less than one half - of the entire aggregate, the Document's Cover Texts may be placed - on covers that bracket the Document within the aggregate, or the - electronic equivalent of covers if the Document is in electronic - form. Otherwise they must appear on printed covers that bracket - the whole aggregate. - - 8. TRANSLATION - - Translation is considered a kind of modification, so you may - distribute translations of the Document under the terms of section - 4. Replacing Invariant Sections with translations requires special - permission from their copyright holders, but you may include - translations of some or all Invariant Sections in addition to the - original versions of these Invariant Sections. You may include a - translation of this License, and all the license notices in the - Document, and any Warranty Disclaimers, provided that you also - include the original English version of this License and the - original versions of those notices and disclaimers. In case of a - disagreement between the translation and the original version of - this License or a notice or disclaimer, the original version will - prevail. - - If a section in the Document is Entitled "Acknowledgements", - "Dedications", or "History", the requirement (section 4) to - Preserve its Title (section 1) will typically require changing the - actual title. - - 9. TERMINATION - - You may not copy, modify, sublicense, or distribute the Document - except as expressly provided under this License. Any attempt - otherwise to copy, modify, sublicense, or distribute it is void, - and will automatically terminate your rights under this License. - - However, if you cease all violation of this License, then your - license from a particular copyright holder is reinstated (a) - provisionally, unless and until the copyright holder explicitly and - finally terminates your license, and (b) permanently, if the - copyright holder fails to notify you of the violation by some - reasonable means prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is - reinstated permanently if the copyright holder notifies you of the - violation by some reasonable means, this is the first time you have - received notice of violation of this License (for any work) from - that copyright holder, and you cure the violation prior to 30 days - after your receipt of the notice. - - Termination of your rights under this section does not terminate - the licenses of parties who have received copies or rights from you - under this License. If your rights have been terminated and not - permanently reinstated, receipt of a copy of some or all of the - same material does not give you any rights to use it. - - 10. FUTURE REVISIONS OF THIS LICENSE - - The Free Software Foundation may publish new, revised versions of - the GNU Free Documentation License from time to time. Such new - versions will be similar in spirit to the present version, but may - differ in detail to address new problems or concerns. See - <http://www.gnu.org/copyleft/>. - - Each version of the License is given a distinguishing version - number. If the Document specifies that a particular numbered - version of this License "or any later version" applies to it, you - have the option of following the terms and conditions either of - that specified version or of any later version that has been - published (not as a draft) by the Free Software Foundation. If the - Document does not specify a version number of this License, you may - choose any version ever published (not as a draft) by the Free - Software Foundation. If the Document specifies that a proxy can - decide which future versions of this License can be used, that - proxy's public statement of acceptance of a version permanently - authorizes you to choose that version for the Document. - - 11. RELICENSING - - "Massive Multiauthor Collaboration Site" (or "MMC Site") means any - World Wide Web server that publishes copyrightable works and also - provides prominent facilities for anybody to edit those works. A - public wiki that anybody can edit is an example of such a server. - A "Massive Multiauthor Collaboration" (or "MMC") contained in the - site means any set of copyrightable works thus published on the MMC - site. - - "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0 - license published by Creative Commons Corporation, a not-for-profit - corporation with a principal place of business in San Francisco, - California, as well as future copyleft versions of that license - published by that same organization. - - "Incorporate" means to publish or republish a Document, in whole or - in part, as part of another Document. - - An MMC is "eligible for relicensing" if it is licensed under this - License, and if all works that were first published under this - License somewhere other than this MMC, and subsequently - incorporated in whole or in part into the MMC, (1) had no cover - texts or invariant sections, and (2) were thus incorporated prior - to November 1, 2008. - - The operator of an MMC Site may republish an MMC contained in the - site under CC-BY-SA on the same site at any time before August 1, - 2009, provided the MMC is eligible for relicensing. - -ADDENDUM: How to use this License for your documents -==================================================== - -To use this License in a document you have written, include a copy of -the License in the document and put the following copyright and license -notices just after the title page: - - Copyright (C) YEAR YOUR NAME. - Permission is granted to copy, distribute and/or modify this document - under the terms of the GNU Free Documentation License, Version 1.3 - or any later version published by the Free Software Foundation; - with no Invariant Sections, no Front-Cover Texts, and no Back-Cover - Texts. A copy of the license is included in the section entitled ``GNU - Free Documentation License''. - - If you have Invariant Sections, Front-Cover Texts and Back-Cover -Texts, replace the "with...Texts." line with this: - - with the Invariant Sections being LIST THEIR TITLES, with - the Front-Cover Texts being LIST, and with the Back-Cover Texts - being LIST. - - If you have Invariant Sections without Cover Texts, or some other -combination of the three, merge those two alternatives to suit the -situation. - - If your document contains nontrivial examples of program code, we -recommend releasing these examples in parallel under your choice of free -software license, such as the GNU General Public License, to permit -their use in free software. - - -File: libgomp.info, Node: Funding, Next: Library Index, Prev: GNU Free Documentation License, Up: Top - -Funding Free Software -********************* - -If you want to have more free software a few years from now, it makes -sense for you to help encourage people to contribute funds for its -development. The most effective approach known is to encourage -commercial redistributors to donate. - - Users of free software systems can boost the pace of development by -encouraging for-a-fee distributors to donate part of their selling price -to free software developers--the Free Software Foundation, and others. - - The way to convince distributors to do this is to demand it and -expect it from them. So when you compare distributors, judge them -partly by how much they give to free software development. Show -distributors they must compete to be the one who gives the most. - - To make this approach work, you must insist on numbers that you can -compare, such as, "We will donate ten dollars to the Frobnitz project -for each disk sold." Don't be satisfied with a vague promise, such as -"A portion of the profits are donated," since it doesn't give a basis -for comparison. - - Even a precise fraction "of the profits from this disk" is not very -meaningful, since creative accounting and unrelated business decisions -can greatly alter what fraction of the sales price counts as profit. If -the price you pay is $50, ten percent of the profit is probably less -than a dollar; it might be a few cents, or nothing at all. - - Some redistributors do development work themselves. This is useful -too; but to keep everyone honest, you need to inquire how much they do, -and what kind. Some kinds of development make much more long-term -difference than others. For example, maintaining a separate version of -a program contributes very little; maintaining the standard version of a -program for the whole community contributes much. Easy new ports -contribute little, since someone else would surely do them; difficult -ports such as adding a new CPU to the GNU Compiler Collection contribute -more; major new features or packages contribute the most. - - By establishing the idea that supporting further development is "the -proper thing to do" when distributing free software for a fee, we can -assure a steady flow of resources into making more free software. - - Copyright (C) 1994 Free Software Foundation, Inc. - Verbatim copying and redistribution of this section is permitted - without royalty; alteration is not permitted. - - -File: libgomp.info, Node: Library Index, Prev: Funding, Up: Top - -Library Index -************* - - -* Menu: - -* Environment Variable: OMP_CANCELLATION. (line 6) -* Environment Variable <1>: OMP_DISPLAY_ENV. (line 6) -* Environment Variable <2>: OMP_DEFAULT_DEVICE. (line 6) -* Environment Variable <3>: OMP_DYNAMIC. (line 6) -* Environment Variable <4>: OMP_MAX_ACTIVE_LEVELS. (line 6) -* Environment Variable <5>: OMP_NESTED. (line 6) -* Environment Variable <6>: OMP_NUM_THREADS. (line 6) -* Environment Variable <7>: OMP_PLACES. (line 6) -* Environment Variable <8>: OMP_PROC_BIND. (line 6) -* Environment Variable <9>: OMP_SCHEDULE. (line 6) -* Environment Variable <10>: OMP_STACKSIZE. (line 6) -* Environment Variable <11>: OMP_THREAD_LIMIT. (line 6) -* Environment Variable <12>: OMP_WAIT_POLICY. (line 6) -* Environment Variable <13>: GOMP_CPU_AFFINITY. (line 6) -* Environment Variable <14>: GOMP_STACKSIZE. (line 6) -* Environment Variable <15>: GOMP_SPINCOUNT. (line 6) -* FDL, GNU Free Documentation License: GNU Free Documentation License. - (line 6) -* Implementation specific setting: OMP_NESTED. (line 6) -* Implementation specific setting <1>: OMP_NUM_THREADS. (line 6) -* Implementation specific setting <2>: OMP_SCHEDULE. (line 6) -* Implementation specific setting <3>: GOMP_STACKSIZE. (line 6) -* Implementation specific setting <4>: GOMP_SPINCOUNT. (line 6) -* Introduction: Top. (line 6) - - - -Tag Table: -Node: Top1992 -Node: Enabling OpenMP3186 -Node: Runtime Library Routines3973 -Node: omp_get_active_level6987 -Node: omp_get_ancestor_thread_num7687 -Node: omp_get_cancellation8617 -Node: omp_get_default_device9431 -Node: omp_get_dynamic10107 -Node: omp_get_level10982 -Node: omp_get_max_active_levels11602 -Node: omp_get_max_threads12301 -Node: omp_get_nested13058 -Node: omp_get_num_devices13970 -Node: omp_get_num_procs14491 -Node: omp_get_num_teams15030 -Node: omp_get_num_threads15546 -Node: omp_get_proc_bind16635 -Node: omp_get_schedule17556 -Node: omp_get_team_num18502 -Node: omp_get_team_size19001 -Node: omp_get_thread_limit19961 -Node: omp_get_thread_num20580 -Node: omp_in_parallel21451 -Node: omp_in_final22100 -Node: omp_is_initial_device22774 -Node: omp_set_default_device23467 -Node: omp_set_dynamic24258 -Node: omp_set_max_active_levels25144 -Node: omp_set_nested25921 -Node: omp_set_num_threads26813 -Node: omp_set_schedule27681 -Node: omp_init_lock28732 -Node: omp_set_lock29385 -Node: omp_test_lock30240 -Node: omp_unset_lock31216 -Node: omp_destroy_lock32147 -Node: omp_init_nest_lock32824 -Node: omp_set_nest_lock33559 -Node: omp_test_nest_lock34474 -Node: omp_unset_nest_lock35501 -Node: omp_destroy_nest_lock36516 -Node: omp_get_wtick37267 -Node: omp_get_wtime37859 -Node: Environment Variables38635 -Node: OMP_CANCELLATION39977 -Node: OMP_DISPLAY_ENV40510 -Node: OMP_DEFAULT_DEVICE41213 -Node: OMP_DYNAMIC41993 -Node: OMP_MAX_ACTIVE_LEVELS42589 -Node: OMP_NESTED43228 -Node: OMP_NUM_THREADS43833 -Node: OMP_PLACES44518 -Node: OMP_PROC_BIND46695 -Node: OMP_SCHEDULE47884 -Node: OMP_STACKSIZE48577 -Node: OMP_THREAD_LIMIT49407 -Node: OMP_WAIT_POLICY50008 -Node: GOMP_CPU_AFFINITY50700 -Node: GOMP_STACKSIZE52437 -Node: GOMP_SPINCOUNT53273 -Node: The libgomp ABI54445 -Node: Implementing MASTER construct55244 -Node: Implementing CRITICAL construct55658 -Node: Implementing ATOMIC construct56397 -Node: Implementing FLUSH construct56878 -Node: Implementing BARRIER construct57149 -Node: Implementing THREADPRIVATE construct57418 -Node: Implementing PRIVATE clause58071 -Node: Implementing FIRSTPRIVATE LASTPRIVATE COPYIN and COPYPRIVATE clauses58652 -Node: Implementing REDUCTION clause59976 -Node: Implementing PARALLEL construct60533 -Node: Implementing FOR construct61790 -Node: Implementing ORDERED construct63788 -Node: Implementing SECTIONS construct64094 -Node: Implementing SINGLE construct64860 -Node: Reporting Bugs65522 -Node: Copying65832 -Node: GNU Free Documentation License103378 -Node: Funding128500 -Node: Library Index131026 - -End Tag Table |