diff options
Diffstat (limited to 'gcc-4.9/gcc/config/arm/fmp626.md')
| -rw-r--r-- | gcc-4.9/gcc/config/arm/fmp626.md | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/gcc-4.9/gcc/config/arm/fmp626.md b/gcc-4.9/gcc/config/arm/fmp626.md new file mode 100644 index 000000000..439054da6 --- /dev/null +++ b/gcc-4.9/gcc/config/arm/fmp626.md @@ -0,0 +1,191 @@ +;; Faraday FA626TE Pipeline Description +;; Copyright (C) 2010-2014 Free Software Foundation, Inc. +;; Written by Mingfeng Wu, based on ARM926EJ-S Pipeline Description. +;; +;; This file is part of GCC. +;; +;; GCC is free software; you can redistribute it and/or modify it under +;; the terms of the GNU General Public License as published by the Free +;; Software Foundation; either version 3, or (at your option) any later +;; version. +;; +;; GCC is distributed in the hope that it will be useful, but WITHOUT ANY +;; WARRANTY; without even the implied warranty of MERCHANTABILITY or +;; FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +;; for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with GCC; see the file COPYING3. If not see +;; <http://www.gnu.org/licenses/>. */ + +;; These descriptions are based on the information contained in the +;; FMP626 Core Design Note, Copyright (c) 2010 Faraday Technology Corp. + +;; Pipeline architecture +;; S E M W(Q1) Q2 +;; ___________________________________________ +;; shifter alu +;; mul1 mul2 mul3 +;; ld/st1 ld/st2 ld/st3 ld/st4 ld/st5 + +;; This automaton provides a pipeline description for the Faraday +;; FMP626 core. +;; +;; The model given here assumes that the condition for all conditional +;; instructions is "true", i.e., that all of the instructions are +;; actually executed. + +(define_automaton "fmp626") + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Pipelines +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +;; There is a single pipeline +;; +;; The ALU pipeline has fetch, decode, execute, memory, and +;; write stages. We only need to model the execute, memory and write +;; stages. + +(define_cpu_unit "fmp626_core" "fmp626") + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; ALU Instructions +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +;; ALU instructions require two cycles to execute, and use the ALU +;; pipeline in each of the three stages. The results are available +;; after the execute stage stage has finished. +;; +;; If the destination register is the PC, the pipelines are stalled +;; for several cycles. That case is not modeled here. + +;; ALU operations +(define_insn_reservation "mp626_alu_op" 1 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "alu_imm,alus_imm,alu_reg,alus_reg,\ + logic_imm,logics_imm,logic_reg,logics_reg,\ + adc_imm,adcs_imm,adc_reg,adcs_reg,\ + adr,bfm,rev,\ + shift_imm,shift_reg,\ + mov_imm,mov_reg,mvn_imm,mvn_reg")) + "fmp626_core") + +(define_insn_reservation "mp626_alu_shift_op" 2 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "alu_shift_imm,logic_shift_imm,alus_shift_imm,logics_shift_imm,\ + alu_shift_reg,logic_shift_reg,alus_shift_reg,logics_shift_reg,\ + extend,\ + mov_shift,mov_shift_reg,\ + mvn_shift,mvn_shift_reg")) + "fmp626_core") + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Multiplication Instructions +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +(define_insn_reservation "mp626_mult1" 2 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "smulwy,smlawy,smulxy,smlaxy")) + "fmp626_core") + +(define_insn_reservation "mp626_mult2" 2 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "mul,mla")) + "fmp626_core") + +(define_insn_reservation "mp626_mult3" 3 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "muls,mlas,smull,smlal,umull,umlal,smlalxy,smlawx")) + "fmp626_core*2") + +(define_insn_reservation "mp626_mult4" 4 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "smulls,smlals,umulls,umlals")) + "fmp626_core*3") + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Load/Store Instructions +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +;; The models for load/store instructions do not accurately describe +;; the difference between operations with a base register writeback +;; (such as "ldm!"). These models assume that all memory references +;; hit in dcache. + +(define_insn_reservation "mp626_load1_op" 5 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "load1,load_byte")) + "fmp626_core") + +(define_insn_reservation "mp626_load2_op" 6 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "load2,load3")) + "fmp626_core*2") + +(define_insn_reservation "mp626_load3_op" 7 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "load4")) + "fmp626_core*3") + +(define_insn_reservation "mp626_store1_op" 0 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "store1")) + "fmp626_core") + +(define_insn_reservation "mp626_store2_op" 1 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "store2,store3")) + "fmp626_core*2") + +(define_insn_reservation "mp626_store3_op" 2 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "store4")) + "fmp626_core*3") + +(define_bypass 1 "mp626_load1_op,mp626_load2_op,mp626_load3_op" + "mp626_store1_op,mp626_store2_op,mp626_store3_op" + "arm_no_early_store_addr_dep") +(define_bypass 1 "mp626_alu_op,mp626_alu_shift_op,mp626_mult1,mp626_mult2,\ + mp626_mult3,mp626_mult4" "mp626_store1_op" + "arm_no_early_store_addr_dep") +(define_bypass 1 "mp626_alu_shift_op" "mp626_alu_op") +(define_bypass 1 "mp626_alu_shift_op" "mp626_alu_shift_op" + "arm_no_early_alu_shift_dep") +(define_bypass 1 "mp626_mult1,mp626_mult2" "mp626_alu_shift_op" + "arm_no_early_alu_shift_dep") +(define_bypass 2 "mp626_mult3" "mp626_alu_shift_op" + "arm_no_early_alu_shift_dep") +(define_bypass 3 "mp626_mult4" "mp626_alu_shift_op" + "arm_no_early_alu_shift_dep") +(define_bypass 1 "mp626_mult1,mp626_mult2" "mp626_alu_op") +(define_bypass 2 "mp626_mult3" "mp626_alu_op") +(define_bypass 3 "mp626_mult4" "mp626_alu_op") +(define_bypass 4 "mp626_load1_op" "mp626_alu_op") +(define_bypass 5 "mp626_load2_op" "mp626_alu_op") +(define_bypass 6 "mp626_load3_op" "mp626_alu_op") + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; Branch and Call Instructions +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + +;; Branch instructions are difficult to model accurately. The FMP626 +;; core can predict most branches. If the branch is predicted +;; correctly, and predicted early enough, the branch can be completely +;; eliminated from the instruction stream. Some branches can +;; therefore appear to require zero cycle to execute. We assume that +;; all branches are predicted correctly, and that the latency is +;; therefore the minimum value. + +(define_insn_reservation "mp626_branch_op" 0 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "branch")) + "fmp626_core") + +;; The latency for a call is actually the latency when the result is available. +;; i.e. R0 ready for int return value. +(define_insn_reservation "mp626_call_op" 1 + (and (eq_attr "tune" "fmp626") + (eq_attr "type" "call")) + "fmp626_core") + |