diff options
Diffstat (limited to 'gcc-4.8.1/gcc/config.gcc')
| -rw-r--r-- | gcc-4.8.1/gcc/config.gcc | 3821 |
1 files changed, 0 insertions, 3821 deletions
diff --git a/gcc-4.8.1/gcc/config.gcc b/gcc-4.8.1/gcc/config.gcc deleted file mode 100644 index 1a0be50f0..000000000 --- a/gcc-4.8.1/gcc/config.gcc +++ /dev/null @@ -1,3821 +0,0 @@ -# GCC target-specific configuration file. -# Copyright (C) 1997-2013 Free Software Foundation, Inc. - -#This file is part of GCC. - -#GCC is free software; you can redistribute it and/or modify it under -#the terms of the GNU General Public License as published by the Free -#Software Foundation; either version 3, or (at your option) any later -#version. - -#GCC is distributed in the hope that it will be useful, but WITHOUT -#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -#for more details. - -#You should have received a copy of the GNU General Public License -#along with GCC; see the file COPYING3. If not see -#<http://www.gnu.org/licenses/>. - -# This is the GCC target-specific configuration file -# where a configuration type is mapped to different system-specific -# definitions and files. This is invoked by the autoconf-generated -# configure script. Putting it in a separate shell file lets us skip -# running autoconf when modifying target-specific information. - -# When you change the cases in the OS or target switches, consider -# updating ../libgcc/config.host also. - -# This file switches on the shell variable ${target}, and also uses the -# following shell variables: -# -# with_* Various variables as set by configure. -# -# enable_threads Either the name, yes or no depending on whether -# threads support was requested. -# -# default_use_cxa_atexit -# The default value for the $enable___cxa_atexit -# variable. enable___cxa_atexit needs to be set to -# "yes" for the correct operation of C++ destructors -# but it relies upon the presence of a non-standard C -# library function called __cxa_atexit. -# Since not all C libraries provide __cxa_atexit the -# default value of $default_use_cxa_atexit is set to -# "no" except for targets which are known to be OK. -# -# default_gnu_indirect_function -# The default value for the $enable_gnu_indirect_function -# variable. enable_gnu_indirect_function relies -# upon the presence of a non-standard gnu ifunc support -# in the assembler, linker and dynamic linker. -# Since not all libraries provide the dynamic linking -# support, the default value of -# $default_gnu_indirect_function is set to -# "no" except for targets which are known to be OK. -# -# gas_flag Either yes or no depending on whether GNU as was -# requested. -# -# gnu_ld_flag Either yes or no depending on whether GNU ld was -# requested. - -# This file sets the following shell variables for use by the -# autoconf-generated configure script: -# -# cpu_type The name of the cpu, if different from the first -# chunk of the canonical target name. -# -# tm_defines List of target macros to define for all compilations. -# -# tm_file A list of target macro files, if different from -# "$cpu_type/$cpu_type.h". Usually it's constructed -# per target in a way like this: -# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h" -# Note that the preferred order is: -# - specific target header "${cpu_type}/${cpu_type.h}" -# - generic headers like dbxelf.h elfos.h, etc. -# - specializing target headers like ${cpu_type.h}/elf.h -# This helps to keep OS specific stuff out of the CPU -# defining header ${cpu_type}/${cpu_type.h}. -# -# It is possible to include automatically-generated -# build-directory files by prefixing them with "./". -# All other files should relative to $srcdir/config. -# -# tm_p_file Location of file with declarations for functions -# in $out_file. -# -# out_file The name of the machine description C support -# file, if different from "$cpu_type/$cpu_type.c". -# -# common_out_file The name of the source file for code shared between -# the compiler proper and the driver. -# -# md_file The name of the machine-description file, if -# different from "$cpu_type/$cpu_type.md". -# -# tmake_file A list of machine-description-specific -# makefile-fragments, if different from -# "$cpu_type/t-$cpu_type". -# -# extra_modes The name of the file containing a list of extra -# machine modes, if necessary and different from -# "$cpu_type/$cpu_type-modes.def". -# -# extra_objs List of extra objects that should be linked into -# the compiler proper (cc1, cc1obj, cc1plus) -# depending on target. -# -# extra_gcc_objs List of extra objects that should be linked into -# the compiler driver (gcc) depending on target. -# -# extra_headers List of used header files from the directory -# config/${cpu_type}. -# -# user_headers_inc_next_pre -# List of header file names of internal gcc header -# files, which should be prefixed by an include_next. -# user_headers_inc_next_post -# List of header file names of internal gcc header -# files, which should be postfixed by an include_next. -# use_gcc_tgmath If set, add tgmath.h to the list of used header -# files. -# -# use_gcc_stdint If "wrap", install a version of stdint.h that -# wraps the system's copy for hosted compilations; -# if "provide", provide a version of systems without -# such a system header; otherwise "none", do not -# provide such a header at all. -# -# extra_programs List of extra executables compiled for this target -# machine, used when linking. -# -# extra_options List of target-dependent .opt files. -# -# c_target_objs List of extra target-dependent objects that be -# linked into the C compiler only. -# -# cxx_target_objs List of extra target-dependent objects that be -# linked into the C++ compiler only. -# -# fortran_target_objs List of extra target-dependent objects that be -# linked into the fortran compiler only. -# -# target_gtfiles List of extra source files with type information. -# -# xm_defines List of macros to define when compiling for the -# target machine. -# -# xm_file List of files to include when compiling for the -# target machine. -# -# use_collect2 Set to yes or no, depending on whether collect2 -# will be used. -# -# target_cpu_default Set to override the default target model. -# -# gdb_needs_out_file_path -# Set to yes if gdb needs a dir command with -# `dirname $out_file`. -# -# thread_file Set to control which thread package to use. -# -# gas Set to yes or no depending on whether the target -# system normally uses GNU as. -# -# need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide -# for this target. This is true if this target -# supports "long" or "wchar_t" wider than 32 bits, -# or BITS_PER_WORD is wider than 32 bits. -# The setting made here must match the one made in -# other locations such as libcpp/configure.ac -# -# configure_default_options -# Set to an initializer for configure_default_options -# in configargs.h, based on --with-cpu et cetera. -# -# native_system_header_dir -# Where system header files are found for this -# target. This defaults to /usr/include. If -# the --with-sysroot configure option or the -# --sysroot command line option is used this -# will be relative to the sysroot. -# target_type_format_char -# The default character to be used for formatting -# the attribute in a -# .type symbol_name, ${t_t_f_c}<property> -# directive. - -# The following variables are used in each case-construct to build up the -# outgoing variables: -# -# gnu_ld Set to yes or no depending on whether the target -# system normally uses GNU ld. -# -# target_has_targetcm Set to yes or no depending on whether the target -# has its own definition of targetcm. -# -# target_has_targetm_common Set to yes or no depending on whether the -# target has its own definition of targetm_common. - -out_file= -common_out_file= -tmake_file= -extra_headers= -user_headers_inc_next_pre= -user_headers_inc_next_post= -use_gcc_tgmath=yes -use_gcc_stdint=none -extra_programs= -extra_objs= -extra_gcc_objs= -extra_options= -c_target_objs= -cxx_target_objs= -fortran_target_objs= -target_has_targetcm=no -target_has_targetm_common=yes -tm_defines= -xm_defines= -# Set this to force installation and use of collect2. -use_collect2= -# Set this to override the default target model. -target_cpu_default= -# Set this if gdb needs a dir command with `dirname $out_file` -gdb_needs_out_file_path= -# Set this to control which thread package will be used. -thread_file= -# Reinitialize these from the flag values every loop pass, since some -# configure entries modify them. -gas="$gas_flag" -gnu_ld="$gnu_ld_flag" -default_use_cxa_atexit=no -default_gnu_indirect_function=no -target_gtfiles= -need_64bit_hwint= -need_64bit_isa= -native_system_header_dir=/usr/include -target_type_format_char='@' - -# Don't carry these over build->host->target. Please. -xm_file= -md_file= - -# Obsolete configurations. -case ${target} in - picochip-* \ - | score-* \ - ) - if test "x$enable_obsolete" != xyes; then - echo "*** Configuration ${target} is obsolete." >&2 - echo "*** Specify --enable-obsolete to build it anyway." >&2 - echo "*** Support will be REMOVED in the next major release of GCC," >&2 - echo "*** unless a maintainer comes forward." >&2 - exit 1 - fi;; -esac - -# Unsupported targets list. Do not put an entry in this list unless -# it would otherwise be caught by a more permissive pattern. The list -# should be in alphabetical order. -case ${target} in - # Avoid special cases that are not obsolete - arm*-*-*eabi* \ - ) - ;; - arm*-wince-pe* \ - | arm*-*-ecos-elf \ - | arm*-*-elf \ - | arm*-*-freebsd* \ - | arm*-*-linux* \ - | arm*-*-uclinux* \ - | i[34567]86-go32-* \ - | i[34567]86-*-go32* \ - | m68k-*-uclinuxoldabi* \ - | mips64orion*-*-rtems* \ - | pdp11-*-bsd \ - | sparc-hal-solaris2* \ - | thumb-*-* \ - | *-*-freebsd[12] | *-*-freebsd[12].* \ - | *-*-freebsd*aout* \ - | *-*-linux*aout* \ - | *-*-linux*coff* \ - | *-*-linux*libc1* \ - | *-*-linux*oldld* \ - | *-*-rtemsaout* \ - | *-*-rtemscoff* \ - | *-*-solaris2 \ - | *-*-solaris2.[0-8] \ - | *-*-solaris2.[0-8].* \ - | *-*-sysv* \ - | vax-*-vms* \ - ) - echo "*** Configuration ${target} not supported" 1>&2 - exit 1 - ;; -esac - -# Set default cpu_type, tm_file, tm_p_file and xm_file so it can be -# updated in each machine entry. Also set default extra_headers for some -# machines. -tm_p_file= -cpu_type=`echo ${target} | sed 's/-.*$//'` -cpu_is_64bit= -case ${target} in -m32c*-*-*) - cpu_type=m32c - tmake_file=m32c/t-m32c - target_has_targetm_common=no - ;; -aarch64*-*-*) - cpu_type=aarch64 - need_64bit_hwint=yes - extra_headers="arm_neon.h" - extra_objs="aarch64-builtins.o" - target_has_targetm_common=yes - ;; -alpha*-*-*) - cpu_type=alpha - need_64bit_hwint=yes - extra_options="${extra_options} g.opt" - ;; -am33_2.0-*-linux*) - cpu_type=mn10300 - ;; -arm*-*-*) - cpu_type=arm - extra_headers="mmintrin.h arm_neon.h" - target_type_format_char='%' - c_target_objs="arm-c.o" - cxx_target_objs="arm-c.o" - extra_options="${extra_options} arm/arm-tables.opt" - ;; -avr-*-*) - cpu_type=avr - c_target_objs="avr-c.o" - cxx_target_objs="avr-c.o" - extra_options="${extra_options} avr/avr-tables.opt" - ;; -bfin*-*) - cpu_type=bfin - ;; -crisv32-*) - cpu_type=cris - ;; -frv*) cpu_type=frv - extra_options="${extra_options} g.opt" - ;; -moxie*) cpu_type=moxie - target_has_targetm_common=no - ;; -fido-*-*) - cpu_type=m68k - extra_headers=math-68881.h - extra_options="${extra_options} m68k/m68k-tables.opt" - ;; -i[34567]86-*-*) - cpu_type=i386 - c_target_objs="i386-c.o" - cxx_target_objs="i386-c.o" - need_64bit_hwint=yes - extra_options="${extra_options} fused-madd.opt" - extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h - pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h - nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h - immintrin.h x86intrin.h avxintrin.h xopintrin.h - ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h - lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h - avx2intrin.h fmaintrin.h f16cintrin.h rtmintrin.h - xtestintrin.h rdseedintrin.h prfchwintrin.h adxintrin.h - fxsrintrin.h xsaveintrin.h xsaveoptintrin.h" - ;; -x86_64-*-*) - cpu_type=i386 - c_target_objs="i386-c.o" - cxx_target_objs="i386-c.o" - extra_options="${extra_options} fused-madd.opt" - extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h - pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h - nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h - immintrin.h x86intrin.h avxintrin.h xopintrin.h - ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h - lzcntintrin.h bmiintrin.h tbmintrin.h bmi2intrin.h - avx2intrin.h fmaintrin.h f16cintrin.h rtmintrin.h - xtestintrin.h rdseedintrin.h prfchwintrin.h adxintrin.h - fxsrintrin.h xsaveintrin.h xsaveoptintrin.h" - need_64bit_hwint=yes - ;; -ia64-*-*) - extra_headers=ia64intrin.h - need_64bit_hwint=yes - extra_options="${extra_options} g.opt fused-madd.opt" - ;; -hppa*-*-*) - cpu_type=pa - ;; -lm32*) - extra_options="${extra_options} g.opt" - ;; -m32r*-*-*) - cpu_type=m32r - extra_options="${extra_options} g.opt" - ;; -m68k-*-*) - extra_headers=math-68881.h - extra_options="${extra_options} m68k/m68k-tables.opt" - ;; -microblaze*-*-*) - cpu_type=microblaze - extra_options="${extra_options} g.opt" - ;; -mips*-*-*) - cpu_type=mips - need_64bit_hwint=yes - extra_headers="loongson.h" - extra_options="${extra_options} g.opt mips/mips-tables.opt" - ;; -picochip-*-*) - cpu_type=picochip - ;; -powerpc*-*-*) - cpu_type=rs6000 - extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h" - need_64bit_hwint=yes - case x$with_cpu in - xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345678]|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|Xe6500) - cpu_is_64bit=yes - ;; - esac - extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" - ;; -rs6000*-*-*) - need_64bit_hwint=yes - extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt" - ;; -score*-*-*) - cpu_type=score - extra_options="${extra_options} g.opt" - ;; -sparc*-*-*) - cpu_type=sparc - c_target_objs="sparc-c.o" - cxx_target_objs="sparc-c.o" - extra_headers="visintrin.h" - need_64bit_hwint=yes - ;; -spu*-*-*) - cpu_type=spu - need_64bit_hwint=yes - ;; -s390*-*-*) - cpu_type=s390 - need_64bit_hwint=yes - extra_options="${extra_options} fused-madd.opt" - ;; -# Note the 'l'; we need to be able to match e.g. "shle" or "shl". -sh[123456789lbe]*-*-* | sh-*-*) - cpu_type=sh - need_64bit_hwint=yes - extra_options="${extra_options} fused-madd.opt" - ;; -v850*-*-*) - cpu_type=v850 - ;; -tic6x-*-*) - cpu_type=c6x - extra_headers="c6x_intrinsics.h" - extra_options="${extra_options} c6x/c6x-tables.opt" - ;; -xtensa*-*-*) - extra_options="${extra_options} fused-madd.opt" - ;; -tilegx*-*-*) - cpu_type=tilegx - need_64bit_hwint=yes - ;; -tilepro-*-*) - cpu_type=tilepro - need_64bit_hwint=yes - ;; -esac - -tm_file=${cpu_type}/${cpu_type}.h -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h -then - tm_p_file=${cpu_type}/${cpu_type}-protos.h -fi -extra_modes= -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def -then - extra_modes=${cpu_type}/${cpu_type}-modes.def -fi -if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt -then - extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt" -fi - -case ${target} in -i[34567]86-*-*) - if test "x$with_abi" != x; then - echo "This target does not support --with-abi." - exit 1 - fi - if test "x$enable_cld" = xyes; then - tm_defines="${tm_defines} USE_IX86_CLD=1" - fi - if test "x$enable_frame_pointer" = xyes; then - tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1" - fi - tm_file="vxworks-dummy.h ${tm_file}" - ;; -x86_64-*-*) - case ${with_abi} in - "") - if test "x$with_multilib_list" = xmx32; then - tm_file="i386/biarchx32.h ${tm_file}" - else - tm_file="i386/biarch64.h ${tm_file}" - fi - ;; - 64 | m64) - tm_file="i386/biarch64.h ${tm_file}" - ;; - x32 | mx32) - tm_file="i386/biarchx32.h ${tm_file}" - ;; - *) - echo "Unknown ABI used in --with-abi=$with_abi" - exit 1 - esac - if test "x$enable_cld" = xyes; then - tm_defines="${tm_defines} USE_IX86_CLD=1" - fi - if test "x$enable_frame_pointer" = xyes; then - tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1" - fi - tm_file="vxworks-dummy.h ${tm_file}" - ;; -arm*-*-* | mips*-*-* | sh*-*-* | sparc*-*-*) - tm_file="vxworks-dummy.h ${tm_file}" - ;; -esac - -# On a.out targets, we need to use collect2. -case ${target} in -*-*-*aout*) - use_collect2=yes - ;; -esac - -# Common C libraries. -tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3" - -# Common parts for widely ported systems. -case ${target} in -*-*-darwin*) - tmake_file="t-darwin ${cpu_type}/t-darwin" - tm_file="${tm_file} darwin.h" - case ${target} in - *-*-darwin9*) - tm_file="${tm_file} darwin9.h" - ;; - *-*-darwin[12][0-9]*) - tm_file="${tm_file} darwin9.h darwin10.h" - ;; - esac - tm_file="${tm_file} ${cpu_type}/darwin.h" - tm_p_file="${tm_p_file} darwin-protos.h" - target_gtfiles="\$(srcdir)/config/darwin.c" - extra_options="${extra_options} darwin.opt" - c_target_objs="${c_target_objs} darwin-c.o" - cxx_target_objs="${cxx_target_objs} darwin-c.o" - fortran_target_objs="darwin-f.o" - target_has_targetcm=yes - extra_objs="darwin.o" - extra_gcc_objs="darwin-driver.o" - default_use_cxa_atexit=yes - use_gcc_stdint=wrap - case ${enable_threads} in - "" | yes | posix) thread_file='posix' ;; - esac - ;; -*-*-freebsd*) - # This is the generic ELF configuration of FreeBSD. Later - # machine-specific sections may refine and add to this - # configuration. - # - # Due to tm_file entry ordering issues that vary between cpu - # architectures, we only define fbsd_tm_file to allow the - # machine-specific section to dictate the final order of all - # entries of tm_file with the minor exception that components - # of the tm_file set here will always be of the form: - # - # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h - # - # The machine-specific section should not tamper with this - # ordering but may order all other entries of tm_file as it - # pleases around the provided core setting. - gas=yes - gnu_ld=yes - fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'` - tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}" - tmake_file="t-slibgcc" - case ${enable_threads} in - no) - fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h" - ;; - "" | yes | posix) - thread_file='posix' - ;; - *) - echo 'Unknown thread configuration for FreeBSD' - exit 1 - ;; - esac - fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h" - extra_options="$extra_options rpath.opt freebsd.opt" - case ${target} in - *-*-freebsd[345].*) - :;; - *) - default_use_cxa_atexit=yes;; - esac - # need_64bit_hwint=yes # system compiler has this for all arch! - use_gcc_stdint=wrap - ;; -*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu) - extra_options="$extra_options gnu-user.opt" - gas=yes - gnu_ld=yes - case ${enable_threads} in - "" | yes | posix) thread_file='posix' ;; - esac - tmake_file="t-slibgcc" - case $target in - *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu) - :;; - *-*-gnu*) - native_system_header_dir=/include - ;; - esac - # glibc / uclibc / bionic switch. - # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD. - case $target in - *linux*) - extra_options="$extra_options linux.opt";; - esac - case $target in - *-*-*android*) - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC" - ;; - *-*-*uclibc*) - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC" - ;; - *) - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC" - ;; - esac - # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit - # is provided. - default_use_cxa_atexit=yes - use_gcc_tgmath=no - use_gcc_stdint=wrap - # Add Android userspace support to Linux targets. - case $target in - *linux*) - tm_file="$tm_file linux-android.h" - extra_options="$extra_options linux-android.opt" - ;; - esac - # Enable compilation for Android by default for *android* targets. - case $target in - *-*-*android*) - tm_defines="$tm_defines ANDROID_DEFAULT=1" - ;; - *) - tm_defines="$tm_defines ANDROID_DEFAULT=0" - ;; - esac - c_target_objs="${c_target_objs} glibc-c.o" - cxx_target_objs="${cxx_target_objs} glibc-c.o" - tmake_file="${tmake_file} t-glibc" - target_has_targetcm=yes - ;; -*-*-netbsd*) - tmake_file="t-slibgcc" - gas=yes - gnu_ld=yes - - # NetBSD 2.0 and later get POSIX threads enabled by default. - # Allow them to be explicitly enabled on any other version. - case ${enable_threads} in - "") - case ${target} in - *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) - thread_file='posix' - tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" - ;; - esac - ;; - yes | posix) - thread_file='posix' - tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS" - ;; - esac - - # NetBSD 2.0 and later provide __cxa_atexit(), which we use by - # default (unless overridden by --disable-__cxa_atexit). - case ${target} in - *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*) - default_use_cxa_atexit=yes - ;; - esac - ;; -*-*-openbsd*) - tmake_file="t-openbsd" - case ${enable_threads} in - yes) - thread_file='posix' - ;; - esac - case ${target} in - *-*-openbsd2.*|*-*-openbsd3.[012]) - tm_defines="${tm_defines} HAS_LIBC_R=1" ;; - esac - case ${target} in - *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*) - default_use_cxa_atexit=yes - ;; - esac - ;; -*-*-rtems*) - case ${enable_threads} in - yes) thread_file='rtems' ;; - esac - extra_options="${extra_options} rtems.opt" - use_gcc_stdint=wrap - ;; -*-*-uclinux*) - extra_options="$extra_options gnu-user.opt" - use_gcc_stdint=wrap - tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC" - ;; -*-*-rdos*) - use_gcc_stdint=wrap - ;; -*-*-solaris2*) - # i?86-*-solaris2* needs to insert headers between cpu default and - # Solaris 2 specific ones. - sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h" - case ${target} in - *-*-solaris2.1[0-9]*) - sol2_tm_file="${sol2_tm_file} sol2-10.h" - use_gcc_stdint=wrap - ;; - *) - use_gcc_stdint=provide - ;; - esac - if test x$gnu_ld = xyes; then - tm_file="usegld.h ${tm_file}" - fi - if test x$gas = xyes; then - tm_file="usegas.h ${tm_file}" - fi - tm_p_file="${tm_p_file} sol2-protos.h" - tmake_file="${tmake_file} t-sol2 t-slibgcc" - c_target_objs="${c_target_objs} sol2-c.o" - cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o" - extra_objs="sol2.o sol2-stubs.o" - extra_options="${extra_options} sol2.opt" - case ${enable_threads}:${have_pthread_h}:${have_thread_h} in - "":yes:* | yes:yes:* ) - thread_file=posix - ;; - esac - ;; -*-*-*vms*) - extra_options="${extra_options} vms/vms.opt" - xmake_file=vms/x-vms - tmake_file="vms/t-vms t-slibgcc" - extra_objs="vms.o" - target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c" - tm_p_file="${tm_p_file} vms/vms-protos.h" - xm_file="vms/xm-vms.h" - c_target_objs="vms-c.o" - cxx_target_objs="vms-c.o" - fortran_target_objs="vms-f.o" - use_gcc_stdint=provide - tm_file="${tm_file} vms/vms-stdint.h" - if test x$gnu_ld != xyes; then - # Build wrappers for native case. - extra_programs="ld\$(exeext) ar\$(exeext)" - tmake_file="$tmake_file vms/t-vmsnative" - fi - ;; -*-*-vxworks*) - tmake_file=t-vxworks - xm_defines=POSIX - extra_options="${extra_options} vxworks.opt" - extra_objs=vxworks.o - case ${enable_threads} in - no) ;; - "" | yes | vxworks) thread_file='vxworks' ;; - *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;; - esac - ;; -*-*-elf) - # Assume that newlib is being used and so __cxa_atexit is provided. - default_use_cxa_atexit=yes - use_gcc_stdint=wrap - ;; -esac - -case ${target} in -aarch64*-*-elf) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h" - tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-elf-raw.h" - tmake_file="${tmake_file} aarch64/t-aarch64" - use_gcc_stdint=wrap - case $target in - aarch64_be-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" - ;; - esac - ;; -aarch64*-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h" - tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-linux.h" - tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux" - case $target in - aarch64_be-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" - ;; - esac - ;; -alpha*-*-linux*) - tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h" - tmake_file="${tmake_file} alpha/t-linux" - extra_options="${extra_options} alpha/elf.opt" - ;; -alpha*-*-freebsd*) - tm_file="elfos.h ${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h" - extra_options="${extra_options} alpha/elf.opt" - ;; -alpha*-*-netbsd*) - tm_file="elfos.h ${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt \ - alpha/elf.opt" - ;; -alpha*-*-openbsd*) - tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT" - tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h" - extra_options="${extra_options} openbsd.opt alpha/elf.opt" - # default x-alpha is only appropriate for dec-osf. - ;; -alpha*-dec-*vms*) - tm_file="${tm_file} vms/vms.h alpha/vms.h" - tmake_file="${tmake_file} alpha/t-vms" - ;; -arm-wrs-vxworks) - tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h" - extra_options="${extra_options} arm/vxworks.opt" - tmake_file="${tmake_file} arm/t-arm arm/t-vxworks" - ;; -arm*-*-netbsdelf*) - tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h ${tm_file} arm/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - tmake_file="${tmake_file} arm/t-arm" - ;; -arm*-*-linux-*) # ARM GNU/Linux with ELF - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h" - case $target in - arm*b-*-linux*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" - ;; - esac - tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi" - tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h vxworks-dummy.h arm/arm.h" - # Define multilib configuration for arm-linux-androideabi. - case ${target} in - *-androideabi) - tmake_file="$tmake_file arm/t-linux-androideabi" - ;; - esac - # The BPABI long long divmod functions return a 128-bit value in - # registers r0-r3. Correctly modeling that requires the use of - # TImode. - need_64bit_hwint=yes - # The EABI requires the use of __cxa_atexit. - default_use_cxa_atexit=yes - with_tls=${with_tls:-gnu} - ;; -arm*-*-uclinux*eabi*) # ARM ucLinux - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h" - tmake_file="arm/t-arm arm/t-arm-elf arm/t-bpabi" - tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h vxworks-dummy.h arm/arm.h" - # The BPABI long long divmod functions return a 128-bit value in - # registers r0-r3. Correctly modeling that requires the use of - # TImode. - need_64bit_hwint=yes - # The EABI requires the use of __cxa_atexit. - default_use_cxa_atexit=yes - ;; -arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems*) - case ${target} in - arm*eb-*-eabi*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" - esac - # The BPABI long long divmod functions return a 128-bit value in - # registers r0-r3. Correctly modeling that requires the use of - # TImode. - need_64bit_hwint=yes - default_use_cxa_atexit=yes - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h" - tmake_file="arm/t-arm arm/t-arm-elf" - case ${target} in - arm*-*-eabi*) - tm_file="$tm_file newlib-stdint.h" - tmake_file="${tmake_file} arm/t-bpabi" - use_gcc_stdint=wrap - ;; - arm*-*-rtems*) - tm_file="${tm_file} rtems.h arm/rtems-eabi.h newlib-stdint.h" - tmake_file="${tmake_file} arm/t-bpabi t-rtems arm/t-rtems-eabi" - ;; - arm*-*-symbianelf*) - tm_file="${tm_file} arm/symbian.h" - # We do not include t-bpabi for Symbian OS because the system - # provides its own implementation of the BPABI functions. - tmake_file="${tmake_file} arm/t-symbian" - ;; - esac - tm_file="${tm_file} arm/aout.h vxworks-dummy.h arm/arm.h" - ;; -avr-*-rtems*) - tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h" - tmake_file="avr/t-avr avr/t-multilib t-rtems avr/t-rtems" - extra_gcc_objs="driver-avr.o avr-devices.o" - extra_objs="avr-devices.o avr-log.o" - ;; -avr-*-*) - tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h dbxelf.h avr/avr-stdint.h" - if test x${with_avrlibc} != xno; then - tm_file="${tm_file} ${cpu_type}/avrlibc.h" - tm_defines="${tm_defines} WITH_AVRLIBC" - fi - tmake_file="avr/t-avr avr/t-multilib" - use_gcc_stdint=wrap - extra_gcc_objs="driver-avr.o avr-devices.o" - extra_objs="avr-devices.o avr-log.o" - ;; -bfin*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" - tmake_file=bfin/t-bfin-elf - use_collect2=no - ;; -bfin*-uclinux*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h" - tmake_file=bfin/t-bfin-uclinux - use_collect2=no - ;; -bfin*-linux-uclibc*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h" - tmake_file="bfin/t-bfin-linux t-slibgcc" - use_collect2=no - ;; -bfin*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h" - tmake_file="t-rtems bfin/t-rtems" - ;; -bfin*-*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h" - use_collect2=no - use_gcc_stdint=wrap - ;; -cr16-*-elf) - tm_file="elfos.h ${tm_file}" - tmake_file="${tmake_file} cr16/t-cr16 " - use_collect2=no - ;; -crisv32-*-elf | crisv32-*-none) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file="cris/t-cris" - target_cpu_default=32 - gas=yes - extra_options="${extra_options} cris/elf.opt" - use_gcc_stdint=wrap - ;; -cris-*-elf | cris-*-none) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file="cris/t-cris cris/t-elfmulti" - gas=yes - extra_options="${extra_options} cris/elf.opt" - use_gcc_stdint=wrap - ;; -crisv32-*-linux* | cris-*-linux*) - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h" - # We need to avoid using t-linux, so override default tmake_file - tmake_file="cris/t-cris cris/t-linux t-slibgcc" - extra_options="${extra_options} cris/linux.opt" - case $target in - cris-*-*) - target_cpu_default=10 - ;; - crisv32-*-*) - target_cpu_default=32 - ;; - esac - ;; -epiphany-*-elf ) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file="epiphany/t-epiphany" - extra_options="${extra_options} fused-madd.opt" - extra_objs="$extra_objs mode-switch-use.o resolve-sw-modes.o" - tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}" - extra_headers="epiphany_intrinsics.h" - ;; -fr30-*-elf) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - ;; -frv-*-elf) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file=frv/t-frv - ;; -frv-*-*linux*) - tm_file="dbxelf.h elfos.h ${tm_file} \ - gnu-user.h linux.h glibc-stdint.h frv/linux.h" - tmake_file="${tmake_file} frv/t-frv frv/t-linux" - ;; -moxie-*-elf) - gas=yes - gnu_ld=yes - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file="${tmake_file} moxie/t-moxie" - ;; -moxie-*-uclinux*) - gas=yes - gnu_ld=yes - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h" - tmake_file="${tmake_file} moxie/t-moxie" - ;; -moxie-*-rtems*) - tmake_file="${tmake_file} moxie/t-moxie t-rtems" - tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h" - ;; -h8300-*-rtems*) - tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems" - tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h" - ;; -h8300-*-elf*) - tmake_file="h8300/t-h8300" - tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h" - ;; -hppa*64*-*-linux*) - target_cpu_default="MASK_PA_11|MASK_PA_20" - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \ - glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \ - pa/pa64-linux.h" - tmake_file="${tmake_file} pa/t-linux" - gas=yes gnu_ld=yes - need_64bit_hwint=yes - ;; -hppa*-*-linux*) - target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS" - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \ - pa/pa32-regs.h pa/pa32-linux.h" - tmake_file="${tmake_file} pa/t-linux" - ;; -hppa*-*-openbsd*) - target_cpu_default="MASK_PA_11" - tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \ - pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h" - tmake_file="${tmake_file} pa/t-openbsd" - extra_options="${extra_options} openbsd.opt" - gas=yes - gnu_ld=yes - ;; -hppa[12]*-*-hpux10*) - case ${target} in - hppa1.1-*-* | hppa2*-*-*) - target_cpu_default="MASK_PA_11" - ;; - esac - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ - pa/pa-hpux.h pa/pa-hpux10.h" - extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt" - case ${target} in - *-*-hpux10.[1-9]*) - tm_file="${tm_file} pa/pa-hpux1010.h" - extra_options="${extra_options} pa/pa-hpux1010.opt" - ;; - esac - use_gcc_stdint=provide - tm_file="${tm_file} hpux-stdint.h" - tmake_file="t-slibgcc" - case ${enable_threads} in - "") - if test x$have_pthread_h = xyes ; then - tmake_file="${tmake_file} pa/t-dce-thr" - fi - ;; - yes | dce) - tmake_file="${tmake_file} pa/t-dce-thr" - ;; - esac - use_collect2=yes - gas=yes - if test "x$with_dwarf2" != x; then - echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 - dwarf2=no - fi - ;; -hppa*64*-*-hpux11*) - target_cpu_default="MASK_PA_11|MASK_PA_20" - if test x$gnu_ld = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_LD" - fi - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \ - pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \ - pa/pa-hpux11.h" - case ${target} in - *-*-hpux11.[12]*) - tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h" - extra_options="${extra_options} pa/pa-hpux1111.opt" - ;; - *-*-hpux11.[3-9]*) - tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h" - extra_options="${extra_options} pa/pa-hpux1131.opt" - ;; - *) - tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h" - ;; - esac - extra_options="${extra_options} pa/pa-hpux.opt \ - pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt" - need_64bit_hwint=yes - tmake_file="t-slibgcc" - case x${enable_threads} in - x | xyes | xposix ) - thread_file=posix - ;; - esac - gas=yes - case ${target} in - *-*-hpux11.[01]*) - use_gcc_stdint=provide - tm_file="${tm_file} hpux-stdint.h" - ;; - *-*-hpux11.[23]*) - use_gcc_stdint=wrap - tm_file="${tm_file} hpux-stdint.h" - ;; - esac - ;; -hppa[12]*-*-hpux11*) - case ${target} in - hppa1.1-*-* | hppa2*-*-*) - target_cpu_default="MASK_PA_11" - ;; - esac - tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \ - pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h" - extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \ - hpux11.opt" - case ${target} in - *-*-hpux11.[12]*) - tm_file="${tm_file} pa/pa-hpux1111.h" - extra_options="${extra_options} pa/pa-hpux1111.opt" - ;; - *-*-hpux11.[3-9]*) - tm_file="${tm_file} pa/pa-hpux1131.h" - extra_options="${extra_options} pa/pa-hpux1131.opt" - ;; - esac - tmake_file="t-slibgcc" - case x${enable_threads} in - x | xyes | xposix ) - thread_file=posix - ;; - esac - use_collect2=yes - gas=yes - case ${target} in - *-*-hpux11.[01]*) - use_gcc_stdint=provide - tm_file="${tm_file} hpux-stdint.h" - ;; - *-*-hpux11.[23]*) - use_gcc_stdint=wrap - tm_file="${tm_file} hpux-stdint.h" - ;; - esac - if test "x$with_dwarf2" != x; then - echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2 - dwarf2=no - fi - ;; -i[34567]86-*-darwin*) - need_64bit_isa=yes - # Baseline choice for a machine that allows m64 support. - with_cpu=${with_cpu:-core2} - tmake_file="${tmake_file} t-slibgcc" - ;; -x86_64-*-darwin*) - with_cpu=${with_cpu:-core2} - tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc" - tm_file="${tm_file} ${cpu_type}/darwin64.h" - ;; -i[34567]86-*-elf*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h" - ;; -x86_64-*-elf*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h" - ;; -i[34567]86-*-rdos*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h" - ;; -x86_64-*-rdos*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h" - tmake_file="i386/t-i386elf t-svr4" - ;; -i[34567]86-*-freebsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h" - ;; -x86_64-*-freebsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h" - ;; -i[34567]86-*-netbsdelf*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - ;; -x86_64-*-netbsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - ;; -i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123]) - tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h" - extra_options="${extra_options} openbsd.opt" - # needed to unconfuse gdb - tmake_file="${tmake_file} t-openbsd i386/t-openbsd" - # we need collect2 until our bug is fixed... - use_collect2=yes - ;; -i[34567]86-*-openbsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" - tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h" - extra_options="${extra_options} openbsd.opt" - gas=yes - gnu_ld=yes - ;; -x86_64-*-openbsd*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h" - tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h" - extra_options="${extra_options} openbsd.opt" - gas=yes - gnu_ld=yes - ;; -i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu) - # Intel 80386's running GNU/* - # with ELF format using glibc 2 - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h" - case ${target} in - i[34567]86-*-linux*) - tm_file="${tm_file} linux.h" - # Assume modern glibc - default_gnu_indirect_function=yes - if test x$enable_targets = xall; then - tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h" - tm_defines="${tm_defines} TARGET_BI_ARCH=1" - tmake_file="${tmake_file} i386/t-linux64" - x86_multilibs="${with_multilib_list}" - if test "$x86_multilibs" = "default"; then - x86_multilibs="m64,m32" - fi - x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` - for x86_multilib in ${x86_multilibs}; do - case ${x86_multilib} in - m32 | m64 | mx32) - TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" - ;; - *) - echo "--with-multilib-list=${x86_with_multilib} not supported." - exit 1 - esac - done - TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` - need_64bit_isa=yes - case X"${with_cpu}" in - Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3) - ;; - X) - if test x$with_cpu_64 = x; then - with_cpu_64=generic - fi - ;; - *) - echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 - echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2 - exit 1 - ;; - esac - else - tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h" - fi - ;; - i[34567]86-*-knetbsd*-gnu) - tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h" - ;; - i[34567]86-*-kfreebsd*-gnu) - tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" - ;; - i[34567]86-*-kopensolaris*-gnu) - tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" - ;; - i[34567]86-*-gnu*) - tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h" - ;; - esac - ;; -x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \ - i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h" - case ${target} in - x86_64-*-linux*) - tm_file="${tm_file} linux.h i386/linux-common.h i386/linux64.h" - # Assume modern glibc - default_gnu_indirect_function=yes - ;; - x86_64-*-kfreebsd*-gnu) - tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h" - ;; - x86_64-*-knetbsd*-gnu) - tm_file="${tm_file} knetbsd-gnu.h" - ;; - esac - tmake_file="${tmake_file} i386/t-linux64" - x86_multilibs="${with_multilib_list}" - if test "$x86_multilibs" = "default"; then - case ${with_abi} in - x32 | mx32) - x86_multilibs="mx32" - ;; - *) - x86_multilibs="m64,m32" - ;; - esac - fi - x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'` - for x86_multilib in ${x86_multilibs}; do - case ${x86_multilib} in - m32 | m64 | mx32) - TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}" - ;; - *) - echo "--with-multilib-list=${x86_with_multilib} not supported." - exit 1 - esac - done - TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'` - ;; -i[34567]86-pc-msdosdjgpp*) - xm_file=i386/xm-djgpp.h - tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h" - native_system_header_dir=/dev/env/DJDIR/include - extra_options="${extra_options} i386/djgpp.opt" - gnu_ld=yes - gas=yes - use_gcc_stdint=wrap - ;; -i[34567]86-*-lynxos*) - xm_defines=POSIX - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h" - tmake_file="${tmake_file} t-lynx" - extra_options="${extra_options} lynx.opt" - thread_file=lynx - gnu_ld=yes - gas=yes - ;; -i[34567]86-*-nto-qnx*) - tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h" - extra_options="${extra_options} i386/nto.opt" - gnu_ld=yes - gas=yes - ;; -i[34567]86-*-rtems*) - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h" - tmake_file="${tmake_file} i386/t-rtems t-rtems" - ;; -i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*) - tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}" - # Set default arch_32 to pentium4, tune_32 to generic like the other - # i386 targets, although config.guess defaults to i386-pc-solaris2*. - case ${target} in - *-*-solaris2.9*) - # Solaris 9/x86 cannot execute SSE/SSE2 instructions by default. - with_arch_32=${with_arch_32:-pentiumpro} - ;; - *) - with_arch_32=${with_arch_32:-pentium4} - ;; - esac - with_tune_32=${with_tune_32:-generic} - case ${target} in - *-*-solaris2.1[0-9]*) - tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h" - tm_defines="${tm_defines} TARGET_BI_ARCH=1" - tmake_file="$tmake_file i386/t-sol2-64" - need_64bit_isa=yes - case X"${with_cpu}" in - Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3) - ;; - X) - if test x$with_cpu_64 = x; then - with_cpu_64=generic - fi - ;; - *) - echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 - echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2 - exit 1 - ;; - esac - ;; - esac - ;; -i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae) - tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h" - case ${target} in - *-vxworksae*) - tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h" - tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae" - ;; - *) - tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h" - tmake_file="${tmake_file} i386/t-vxworks" - ;; - esac - ;; -i[34567]86-*-cygwin*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h" - xm_file=i386/xm-cygwin.h - tmake_file="${tmake_file} i386/t-cygming t-slibgcc" - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - extra_options="${extra_options} i386/cygming.opt" - extra_objs="winnt.o winnt-stubs.o" - c_target_objs="${c_target_objs} msformat-c.o" - cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" - if test x$enable_threads = xyes; then - thread_file='posix' - fi - use_gcc_stdint=wrap - ;; -i[34567]86-*-mingw* | x86_64-*-mingw*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h" - xm_file=i386/xm-mingw32.h - case ${target} in - x86_64-*-* | *-w64-*) - need_64bit_isa=yes - ;; - *) - ;; - esac - if test x$enable_threads = xposix ; then - tm_file="${tm_file} i386/mingw-pthread.h" - fi - tm_file="${tm_file} i386/mingw32.h" - # This makes the logic if mingw's or the w64 feature set has to be used - case ${target} in - *-w64-*) - user_headers_inc_next_post="${user_headers_inc_next_post} float.h" - user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h" - tm_file="${tm_file} i386/mingw-w64.h" - if test x$enable_targets = xall; then - tm_defines="${tm_defines} TARGET_BI_ARCH=1" - case X"${with_cpu}" in - Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver3|Xbdver2|Xbdver1|Xbtver2|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3) - ;; - X) - if test x$with_cpu_64 = x; then - with_cpu_64=generic - fi - ;; - *) - echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2 - echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver3 bdver2 bdver1 btver2 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2 - exit 1 - ;; - esac - fi - ;; - *) - ;; - esac - tm_file="${tm_file} i386/mingw-stdint.h" - tmake_file="${tmake_file} i386/t-cygming t-slibgcc" - case ${target} in - x86_64-w64-*) - tmake_file="${tmake_file} i386/t-mingw-w64" - ;; - i[34567]86-w64-*) - tmake_file="${tmake_file} i386/t-mingw-w32" - ;; - esac - native_system_header_dir=/mingw/include - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - extra_options="${extra_options} i386/cygming.opt i386/mingw.opt" - case ${target} in - *-w64-*) - extra_options="${extra_options} i386/mingw-w64.opt" - ;; - *) - ;; - esac - extra_objs="winnt.o winnt-stubs.o" - c_target_objs="${c_target_objs} msformat-c.o" - cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o" - gas=yes - gnu_ld=yes - default_use_cxa_atexit=yes - use_gcc_stdint=wrap - case ${enable_threads} in - "" | yes | win32) - thread_file='win32' - ;; - posix) - thread_file='posix' - ;; - esac - case ${target} in - *mingw32crt*) - tm_file="${tm_file} i386/crtdll.h" - ;; - *mingw32msv* | *mingw*) - ;; - esac - ;; -i[34567]86-*-interix[3-9]*) - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h" - tmake_file="${tmake_file} i386/t-interix" - extra_options="${extra_options} rpath.opt i386/interix.opt" - extra_objs="winnt.o winnt-stubs.o" - target_gtfiles="\$(srcdir)/config/i386/winnt.c" - if test x$enable_threads = xyes ; then - thread_file='posix' - fi - if test x$stabs = xyes ; then - tm_file="${tm_file} dbxcoff.h" - fi - ;; -ia64*-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h" - tmake_file="ia64/t-ia64" - target_cpu_default="0" - if test x$gas = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_AS" - fi - if test x$gnu_ld = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_LD" - fi - ;; -ia64*-*-freebsd*) - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h" - target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" - tmake_file="${tmake_file} ia64/t-ia64" - ;; -ia64*-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h" - tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind" - target_cpu_default="MASK_GNU_AS|MASK_GNU_LD" - ;; -ia64*-*-hpux*) - tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h" - tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc" - target_cpu_default="MASK_GNU_AS" - case x$enable_threads in - x | xyes | xposix ) - thread_file=posix - ;; - esac - use_collect2=no - c_target_objs="ia64-c.o" - cxx_target_objs="ia64-c.o" - extra_options="${extra_options} ia64/ilp32.opt hpux11.opt" - use_gcc_stdint=wrap - tm_file="${tm_file} hpux-stdint.h" - case ${target} in - *-*-hpux11.3*) - tm_file="${tm_file} ia64/hpux-unix2003.h" - ;; - esac - ;; -ia64-hp-*vms*) - tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h" - tmake_file="${tmake_file} ia64/t-ia64" - target_cpu_default="0" - if test x$gas = xyes - then - target_cpu_default="${target_cpu_default}|MASK_GNU_AS" - fi - extra_options="${extra_options} ia64/vms.opt" - ;; -iq2000*-*-elf*) - tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h" - out_file=iq2000/iq2000.c - md_file=iq2000/iq2000.md - ;; -lm32-*-elf*) - tm_file="dbxelf.h elfos.h ${tm_file}" - tmake_file="${tmake_file} lm32/t-lm32" - ;; -lm32-*-rtems*) - tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h" - tmake_file="${tmake_file} lm32/t-lm32" - tmake_file="${tmake_file} t-rtems" - tmake_file="${tmake_file} lm32/t-rtems" - ;; -lm32-*-uclinux*) - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h" - tmake_file="${tmake_file} lm32/t-lm32" - ;; -m32r-*-elf*) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - ;; -m32rle-*-elf*) - tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}" - ;; -m32r-*-rtems*) - tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h" - tmake_file="m32r/t-m32r t-rtems" - ;; -m32r-*-linux*) - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h" - # We override the tmake_file for linux -- why? - tmake_file="m32r/t-linux t-slibgcc" - gnu_ld=yes - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -m32rle-*-linux*) - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h" - # We override the tmake_file for linux -- why? - tmake_file="m32r/t-linux t-slibgcc" - gnu_ld=yes - if test x$enable_threads = xyes; then - thread_file='posix' - fi - ;; -m68k-*-elf* | fido-*-elf*) - case ${target} in - fido-*-elf*) - # Check that $with_cpu makes sense. - case $with_cpu in - "" | "fidoa") - ;; - *) - echo "Cannot accept --with-cpu=$with_cpu" - exit 1 - ;; - esac - with_cpu=fidoa - ;; - *) - default_m68k_cpu=68020 - default_cf_cpu=5206 - ;; - esac - tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h" - tm_defines="${tm_defines} MOTOROLA=1" - tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf" - # Add multilibs for targets other than fido. - case ${target} in - fido-*-elf*) - ;; - *) - tmake_file="$tmake_file m68k/t-mlibs" - ;; - esac - ;; -m68k*-*-netbsdelf*) - default_m68k_cpu=68020 - default_cf_cpu=5475 - tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - tm_defines="${tm_defines} MOTOROLA=1" - ;; -m68k*-*-openbsd*) - default_m68k_cpu=68020 - default_cf_cpu=5475 - # needed to unconfuse gdb - tm_defines="${tm_defines} OBSD_OLD_GAS" - tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h" - extra_options="${extra_options} openbsd.opt" - tmake_file="t-openbsd m68k/t-openbsd" - # we need collect2 until our bug is fixed... - use_collect2=yes - ;; -m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux - # with uClibc, using the new GNU/Linux-style - # ABI. - default_m68k_cpu=68020 - default_cf_cpu=5206 - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h" - extra_options="${extra_options} m68k/uclinux.opt" - tm_defines="${tm_defines} MOTOROLA=1" - tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs" - ;; -m68k-*-linux*) # Motorola m68k's running GNU/Linux - # with ELF format using glibc 2 - # aka the GNU/Linux C library 6. - default_m68k_cpu=68020 - default_cf_cpu=5475 - with_arch=${with_arch:-m68k} - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h" - extra_options="${extra_options} m68k/ieee.opt" - tm_defines="${tm_defines} MOTOROLA=1" - tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs" - ;; -m68k-*-rtems*) - default_m68k_cpu=68020 - default_cf_cpu=5206 - tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs" - tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h" - tm_defines="${tm_defines} MOTOROLA=1" - ;; -mcore-*-elf) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h" - tmake_file=mcore/t-mcore - inhibit_libc=true - ;; -mep-*-*) - tm_file="dbxelf.h elfos.h ${tm_file}" - tmake_file=mep/t-mep - c_target_objs="mep-pragma.o" - cxx_target_objs="mep-pragma.o" - if test -d "${srcdir}/../newlib/libc/include" && - test "x$with_headers" = x; then - with_headers=yes - fi - use_gcc_stdint=wrap - ;; -microblaze*-linux*) - case $target in - microblazeel-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" - ;; - microblaze-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" - ;; - esac - tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h" - tm_file="${tm_file} glibc-stdint.h" - c_target_objs="${c_target_objs} microblaze-c.o" - cxx_target_objs="${cxx_target_objs} microblaze-c.o" - tmake_file="${tmake_file} microblaze/t-microblaze" - tmake_file="${tmake_file} microblaze/t-microblaze-linux" - ;; -microblaze*-*-rtems*) - tm_file="${tm_file} dbxelf.h" - tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h" - c_target_objs="${c_target_objs} microblaze-c.o" - cxx_target_objs="${cxx_target_objs} microblaze-c.o" - tmake_file="${tmake_file} microblaze/t-microblaze" - tmake_file="${tmake_file} t-rtems microblaze/t-rtems" - ;; -microblaze*-*-elf) - case $target in - microblazeel-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0" - ;; - microblaze-*) - tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321" - ;; - esac - tm_file="${tm_file} dbxelf.h newlib-stdint.h" - c_target_objs="${c_target_objs} microblaze-c.o" - cxx_target_objs="${cxx_target_objs} microblaze-c.o" - tmake_file="${tmake_file} microblaze/t-microblaze" - ;; -mips*-*-netbsd*) # NetBSD/mips, either endian. - target_cpu_default="MASK_ABICALLS" - tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - ;; -mips*-mti-linux*) - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h mips/linux-common.h mips/mti-linux.h" - tmake_file="${tmake_file} mips/t-mti-linux" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" - gnu_ld=yes - gas=yes - test x$with_llsc != x || with_llsc=yes - ;; -mips64*-*-linux* | mipsisa64*-*-linux*) - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h mips/linux-common.h" - tmake_file="${tmake_file} mips/t-linux64" - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32" - case ${target} in - mips64el-st-linux-gnu) - tm_file="${tm_file} mips/st.h" - tmake_file="${tmake_file} mips/t-st" - ;; - mips64octeon*-*-linux*) - tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\"" - target_cpu_default=MASK_SOFT_FLOAT_ABI - ;; - mipsisa64r2*-*-linux*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65" - ;; - esac - gnu_ld=yes - gas=yes - test x$with_llsc != x || with_llsc=yes - ;; -mips*-*-linux*) # Linux MIPS, either endian. - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h" - if test x$enable_targets = xall; then - tm_file="${tm_file} mips/gnu-user64.h mips/linux64.h" - tmake_file="${tmake_file} mips/t-linux64" - fi - tm_file="${tm_file} mips/linux-common.h" - case ${target} in - mipsisa32r2*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33" - ;; - mipsisa32*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" - esac - test x$with_llsc != x || with_llsc=yes - ;; -mips*-mti-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h mips/mti-elf.h" - tmake_file="mips/t-mti-elf" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" - ;; -mips*-sde-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h" - tmake_file="mips/t-sde" - extra_options="${extra_options} mips/sde.opt" - case "${with_newlib}" in - yes) - # newlib / libgloss. - ;; - *) - # MIPS toolkit libraries. - tm_file="$tm_file mips/sdemtk.h" - tmake_file="$tmake_file mips/t-sdemtk" - case ${enable_threads} in - "" | yes | mipssde) - thread_file='mipssde' - ;; - esac - ;; - esac - case ${target} in - mipsisa32r2*) - tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32" - ;; - mipsisa32*) - tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32" - ;; - mipsisa64r2*) - tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32" - ;; - mipsisa64*) - tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32" - ;; - esac - ;; -mipsisa32-*-elf* | mipsisa32el-*-elf* | \ -mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \ -mipsisa64-*-elf* | mipsisa64el-*-elf* | \ -mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" - tmake_file="mips/t-isa3264" - case ${target} in - mipsisa32r2*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33" - ;; - mipsisa32*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32" - ;; - mipsisa64r2*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65" - ;; - mipsisa64*) - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64" - ;; - esac - case ${target} in - mipsisa32*-*-elfoabi*) - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32" - tm_file="${tm_file} mips/elfoabi.h" - ;; - mipsisa64*-*-elfoabi*) - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64" - tm_file="${tm_file} mips/elfoabi.h" - ;; - *-*-elf*) - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" - ;; - esac - ;; -mipsisa64sr71k-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" - tmake_file=mips/t-sr71k - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI" - ;; -mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" - tmake_file="mips/t-elf mips/t-sb1" - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64" - ;; -mips-*-elf* | mipsel-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" - tmake_file="mips/t-elf" - ;; -mips64-*-elf* | mips64el-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h" - tmake_file="mips/t-elf" - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" - ;; -mips64vr-*-elf* | mips64vrel-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h" - tmake_file=mips/t-vr - tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI" - ;; -mips64orion-*-elf* | mips64orionel-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h" - tmake_file="mips/t-elf" - target_cpu_default="MASK_64BIT|MASK_FLOAT64" - tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64" - ;; -mips*-*-rtems*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h" - tmake_file="mips/t-elf t-rtems mips/t-rtems" - ;; -mips-wrs-vxworks) - tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h" - tmake_file="${tmake_file} mips/t-vxworks" - ;; -mipstx39-*-elf* | mipstx39el-*-elf*) - tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h" - tmake_file="mips/t-r3900" - ;; -mmix-knuth-mmixware) - tm_file="${tm_file} newlib-stdint.h" - need_64bit_hwint=yes - use_gcc_stdint=wrap - ;; -mn10300-*-*) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - use_gcc_stdint=wrap - ;; -pdp11-*-*) - tm_file="${tm_file} newlib-stdint.h" - use_gcc_stdint=wrap - ;; -picochip-*) - tm_file="${tm_file} newlib-stdint.h" - use_gcc_stdint=wrap - tmake_file="picochip/t-picochip t-pnt16-warn" - ;; -# port not yet contributed -#powerpc-*-openbsd*) -# tmake_file="${tmake_file} rs6000/t-fprules" -# extra_headers= -# ;; -powerpc-*-darwin*) - extra_options="${extra_options} rs6000/darwin.opt" - case ${target} in - *-darwin1[0-9]* | *-darwin[8-9]*) - tmake_file="${tmake_file} rs6000/t-darwin8" - tm_file="${tm_file} rs6000/darwin8.h" - ;; - *-darwin7*) - tm_file="${tm_file} rs6000/darwin7.h" - ;; - *-darwin[0-6]*) - ;; - esac - tmake_file="${tmake_file} t-slibgcc" - extra_headers=altivec.h - ;; -powerpc64-*-darwin*) - extra_options="${extra_options} ${cpu_type}/darwin.opt" - tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc" - tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h" - extra_headers=altivec.h - ;; -powerpc*-*-freebsd*) - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - case ${target} in - powerpc64*) - tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h" - tmake_file="${tmake_file} rs6000/t-freebsd64" - extra_options="${extra_options} rs6000/linux64.opt" - ;; - *) - tm_file="${tm_file} rs6000/freebsd.h" - ;; - esac - ;; -powerpc-*-netbsd*) - tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - tmake_file="${tmake_file} rs6000/t-netbsd" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpc-*-eabispe*) - tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-spe rs6000/t-ppccomm" - use_gcc_stdint=wrap - ;; -powerpc-*-eabisimaltivec*) - tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" - use_gcc_stdint=wrap - ;; -powerpc-*-eabisim*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - use_gcc_stdint=wrap - ;; -powerpc-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - ;; -powerpc-*-eabialtivec*) - tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm" - use_gcc_stdint=wrap - ;; -powerpc-xilinx-eabi*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h" - extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx" - use_gcc_stdint=wrap - ;; -powerpc-*-eabi*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - use_gcc_stdint=wrap - ;; -powerpc-*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm" - ;; -powerpc-*-linux* | powerpc64-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h" - extra_options="${extra_options} rs6000/sysv4.opt" - tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm" - maybe_biarch=yes - case ${target} in - powerpc64-*-linux*spe* | powerpc64-*-linux*paired*) - echo "*** Configuration ${target} not supported" 1>&2 - exit 1 - ;; - powerpc-*-linux*spe* | powerpc-*-linux*paired*) - maybe_biarch= - ;; - powerpc64-*-linux*) - test x$with_cpu != x || cpu_is_64bit=yes - maybe_biarch=always - ;; - esac - case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in - always:* | yes:*powerpc64* | yes:all:* | yes:*:yes) - if test x$cpu_is_64bit = xyes; then - tm_file="${tm_file} rs6000/default64.h" - fi - tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h" - tmake_file="$tmake_file rs6000/t-linux64" - extra_options="${extra_options} rs6000/linux64.opt" - ;; - *) - tm_file="${tm_file} rs6000/linux.h glibc-stdint.h" - tmake_file="$tmake_file rs6000/t-linux" - ;; - esac - case ${target} in - powerpc*-*-linux*ppc476*) - tm_file="${tm_file} rs6000/476.h" - extra_options="${extra_options} rs6000/476.opt" ;; - powerpc*-*-linux*altivec*) - tm_file="${tm_file} rs6000/linuxaltivec.h" ;; - powerpc*-*-linux*spe*) - tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;; - powerpc*-*-linux*paired*) - tm_file="${tm_file} rs6000/750cl.h" ;; - esac - if test x${enable_secureplt} = xyes; then - tm_file="rs6000/secureplt.h ${tm_file}" - fi - ;; -powerpc-wrs-vxworks|powerpc-wrs-vxworksae) - tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h" - tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks" - extra_options="${extra_options} rs6000/sysv4.opt" - extra_headers=ppc-asm.h - case ${target} in - *-vxworksae*) - tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h" - tmake_file="${tmake_file} rs6000/t-vxworksae" - ;; - *-vxworks*) - tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h" - ;; - esac - ;; -powerpc-*-lynxos*) - xm_defines=POSIX - tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h" - tmake_file="t-lynx rs6000/t-lynx" - extra_options="${extra_options} rs6000/sysv4.opt lynx.opt" - thread_file=lynx - gnu_ld=yes - gas=yes - ;; -powerpcle-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - ;; -powerpcle-*-eabisim*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - use_gcc_stdint=wrap - ;; -powerpcle-*-eabi*) - tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h" - tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm" - extra_options="${extra_options} rs6000/sysv4.opt" - use_gcc_stdint=wrap - ;; -rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*) - tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h" - tmake_file="rs6000/t-aix43 t-slibgcc" - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - use_gcc_stdint=provide - extra_headers= - ;; -rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*) - tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h" - extra_options="${extra_options} rs6000/aix64.opt" - tmake_file="rs6000/t-aix43 t-slibgcc" - use_collect2=yes - thread_file='aix' - use_gcc_stdint=wrap - extra_headers= - ;; -rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*) - tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h" - tmake_file="rs6000/t-aix52 t-slibgcc" - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - use_gcc_stdint=wrap - extra_headers= - ;; -rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*) - tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h" - tmake_file="rs6000/t-aix52 t-slibgcc" - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - use_gcc_stdint=wrap - extra_headers=altivec.h - ;; -rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*) - tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h" - tmake_file="rs6000/t-aix52 t-slibgcc" - extra_options="${extra_options} rs6000/aix64.opt" - use_collect2=yes - thread_file='aix' - use_gcc_stdint=wrap - extra_headers=altivec.h - ;; -rl78-*-elf*) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - target_has_targetm_common=no - c_target_objs="rl78-c.o" - cxx_target_objs="rl78-c.o" - tmake_file="${tmake_file} rl78/t-rl78" - ;; -rx-*-elf*) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - tmake_file="${tmake_file} rx/t-rx" - ;; -s390-*-linux*) - default_gnu_indirect_function=yes - tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" - if test x$enable_targets = xall; then - tmake_file="${tmake_file} s390/t-linux64" - fi - ;; -s390x-*-linux*) - default_gnu_indirect_function=yes - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h" - tm_p_file=s390/s390-protos.h - md_file=s390/s390.md - extra_modes=s390/s390-modes.def - out_file=s390/s390.c - tmake_file="${tmake_file} s390/t-linux64" - ;; -s390x-ibm-tpf*) - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h" - tm_p_file=s390/s390-protos.h - md_file=s390/s390.md - extra_modes=s390/s390-modes.def - out_file=s390/s390.c - thread_file='tpf' - extra_options="${extra_options} s390/tpf.opt" - ;; -score-*-elf) - gas=yes - gnu_ld=yes - tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h" - ;; -sh-*-elf* | sh[12346l]*-*-elf* | \ - sh-*-linux* | sh[2346lbe]*-*-linux* | \ - sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \ - sh64-*-netbsd* | sh64l*-*-netbsd*) - tmake_file="${tmake_file} sh/t-sh sh/t-elf" - if test x${with_endian} = x; then - case ${target} in - sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;; - shbe-*-* | sheb-*-*) with_endian=big,little ;; - sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;; - shl* | sh64l* | sh*-*-linux* | \ - sh5l* | sh-superh-elf) with_endian=little,big ;; - sh[1234]*-*-*) with_endian=big ;; - *) with_endian=big,little ;; - esac - fi - # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs. - # First word : the default endian. - # Second word: the secondary endian (optional). - case ${with_endian} in - big) TM_ENDIAN_CONFIG=mb ;; - little) TM_ENDIAN_CONFIG=ml ;; - big,little) TM_ENDIAN_CONFIG="mb ml" ;; - little,big) TM_ENDIAN_CONFIG="ml mb" ;; - *) echo "with_endian=${with_endian} not supported."; exit 1 ;; - esac - case ${with_endian} in - little*) tm_file="sh/little.h ${tm_file}" ;; - esac - tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h" - case ${target} in - sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux" - tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;; - sh*-*-netbsd*) - tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - - ;; - sh*-superh-elf) if test x$with_libgloss != xno; then - with_libgloss=yes - tm_file="${tm_file} sh/newlib.h" - fi - tm_file="${tm_file} sh/embed-elf.h" - tm_file="${tm_file} sh/superh.h" - extra_options="${extra_options} sh/superh.opt" ;; - *) if test x$with_newlib = xyes \ - && test x$with_libgloss = xyes; then - tm_file="${tm_file} sh/newlib.h" - fi - tm_file="${tm_file} sh/embed-elf.h" ;; - esac - case ${target} in - sh5*-*-netbsd*) - # SHmedia, 32-bit ABI - tmake_file="${tmake_file} sh/t-sh64" - ;; - sh64*-netbsd*) - # SHmedia, 64-bit ABI - tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5-64" - ;; - *-*-netbsd) - ;; - sh64*-*-linux*) - tmake_file="${tmake_file} sh/t-sh64" - tm_file="${tm_file} sh/sh64.h" - extra_headers="shmedia.h ushmedia.h sshmedia.h" - ;; - sh64*) - tmake_file="${tmake_file} sh/t-sh64" - tm_file="${tm_file} sh/sh64.h" - if test x$with_newlib = xyes; then - tm_file="${tm_file} newlib-stdint.h" - fi - extra_headers="shmedia.h ushmedia.h sshmedia.h" - ;; - *-*-elf*) - tm_file="${tm_file} newlib-stdint.h" - ;; - esac - # sed el/eb endian suffixes away to avoid confusion with sh[23]e - case `echo ${target} | sed 's/e[lb]-/-/'` in - sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;; - sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;; - sh4a_single_only*) sh_cpu_target=sh4a-single-only ;; - sh4a_single*) sh_cpu_target=sh4a-single ;; - sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;; - sh4al) sh_cpu_target=sh4al ;; - sh4a*) sh_cpu_target=sh4a ;; - sh4_single_only*) sh_cpu_target=sh4-single-only ;; - sh4_single*) sh_cpu_target=sh4-single ;; - sh4_nofpu*) sh_cpu_target=sh4-nofpu ;; - sh4* | sh-superh-*) sh_cpu_target=sh4 ;; - sh3e*) sh_cpu_target=sh3e ;; - sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;; - sh2a_single_only*) sh_cpu_target=sh2a-single-only ;; - sh2a_single*) sh_cpu_target=sh2a-single ;; - sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;; - sh2a*) sh_cpu_target=sh2a ;; - sh2e*) sh_cpu_target=sh2e ;; - sh2*) sh_cpu_target=sh2 ;; - *) sh_cpu_target=sh1 ;; - esac - # did the user say --without-fp ? - if test x$with_fp = xno; then - case ${sh_cpu_target} in - sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;; - sh4al | sh1) ;; - sh4a* ) sh_cpu_target=sh4a-nofpu ;; - sh4*) sh_cpu_target=sh4-nofpu ;; - sh3*) sh_cpu_target=sh3 ;; - sh2a*) sh_cpu_target=sh2a-nofpu ;; - sh2*) sh_cpu_target=sh2 ;; - *) echo --without-fp not available for $target: ignored - esac - tm_defines="$tm_defines STRICT_NOFPU=1" - fi - sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`" - case $sh_cpu_default in - sh5-64media-nofpu | sh5-64media | \ - sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \ - sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \ - sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \ - sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \ - sh3e | sh3 | sh2e | sh2 | sh1) ;; - "") sh_cpu_default=${sh_cpu_target} ;; - *) echo "with_cpu=$with_cpu not supported"; exit 1 ;; - esac - sh_multilibs=${with_multilib_list} - if test "$sh_multilibs" = "default" ; then - case ${target} in - sh64-superh-linux* | \ - sh[1234]*) sh_multilibs=${sh_cpu_target} ;; - sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;; - sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;; - sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;; - sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;; - *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;; - esac - if test x$with_fp = xno; then - sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`" - fi - fi - target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_` - tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"' - tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" - sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-` - for sh_multilib in ${sh_multilibs}; do - case ${sh_multilib} in - m1 | m2 | m2e | m3 | m3e | \ - m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\ - m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \ - m2a | m2a-single | m2a-single-only | m2a-nofpu | \ - m5-64media | m5-64media-nofpu | \ - m5-32media | m5-32media-nofpu | \ - m5-compact | m5-compact-nofpu) - # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition - # It is passed to MULTIILIB_OPTIONS verbatim. - TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}" - tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1" - ;; - \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh - # It is passed the MULTILIB_EXCEPTIONS verbatim. - TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;; - *) - echo "with_multilib_list=${sh_multilib} not supported." - exit 1 - ;; - esac - done - TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'` - if test x${enable_incomplete_targets} = xyes ; then - tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1" - fi - tm_file="$tm_file ./sysroot-suffix.h" - tmake_file="$tmake_file t-sysroot-suffix" - ;; -sh-*-rtems*) - tmake_file="sh/t-sh t-rtems sh/t-rtems" - tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h" - ;; -sh-wrs-vxworks) - tmake_file="$tmake_file sh/t-sh sh/t-vxworks" - tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h" - ;; -sparc-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h" - case ${target} in - *-leon-*) - tmake_file="sparc/t-sparc sparc/t-leon" - ;; - *-leon[3-9]*) - tmake_file="sparc/t-sparc sparc/t-leon3" - ;; - *) - tmake_file="sparc/t-sparc sparc/t-elf" - ;; - esac - ;; -sparc-*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h" - tmake_file="sparc/t-sparc sparc/t-elf sparc/t-rtems t-rtems" - ;; -sparc-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - case ${target} in - *-leon-*) - tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon" - ;; - *-leon[3-9]*) - tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3" - ;; - *) - tmake_file="${tmake_file} sparc/t-sparc" - ;; - esac - if test x$enable_targets = xall; then - tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h" - tmake_file="${tmake_file} sparc/t-linux64" - else - tm_file="${tm_file} sparc/linux.h" - tmake_file="${tmake_file} sparc/t-linux" - fi - ;; -sparc-*-netbsdelf*) - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-sparc" - ;; -sparc*-*-solaris2*) - tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h sparc/tso.h" - case ${target} in - sparc64-*-* | sparcv9-*-*) - tm_file="sparc/default-64.h ${tm_file}" - ;; - *) - test x$with_cpu != x || with_cpu=v9 - ;; - esac - tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2-64" - ;; -sparc-wrs-vxworks) - tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h" - tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks" - ;; -sparc64-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h" - extra_options="${extra_options}" - tmake_file="${tmake_file} sparc/t-sparc" - ;; -sparc64-*-rtems*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h" - extra_options="${extra_options}" - tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64 t-rtems" - ;; -sparc64-*-linux*) - tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default-64.h sparc/linux64.h sparc/tso.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64" - ;; -sparc64-*-freebsd*|ultrasparc-*-freebsd*) - tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h" - extra_options="${extra_options} sparc/long-double-switch.opt" - case "x$with_cpu" in - xultrasparc) ;; - x) with_cpu=ultrasparc ;; - *) echo "$with_cpu not supported for freebsd target"; exit 1 ;; - esac - tmake_file="${tmake_file} sparc/t-sparc" - ;; -sparc64-*-netbsd*) - tm_file="sparc/biarch64.h ${tm_file}" - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt" - extra_options="${extra_options} sparc/long-double-switch.opt" - tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64" - ;; -sparc64-*-openbsd*) - tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h" - tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h" - extra_options="${extra_options} openbsd.opt" - extra_options="${extra_options}" - gas=yes gnu_ld=yes - with_cpu=ultrasparc - tmake_file="${tmake_file} sparc/t-sparc" - ;; -spu-*-elf*) - tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h" - tmake_file="spu/t-spu-elf" - native_system_header_dir=/include - extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h" - extra_modes=spu/spu-modes.def - c_target_objs="${c_target_objs} spu-c.o" - cxx_target_objs="${cxx_target_objs} spu-c.o" - ;; -tic6x-*-elf) - tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h" - tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h" - tmake_file="c6x/t-c6x c6x/t-c6x-elf" - use_collect2=no - ;; -tic6x-*-uclinux) - tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h" - tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h" - tm_file="${tm_file} ./sysroot-suffix.h" - tmake_file="t-sysroot-suffix t-slibgcc" - tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux" - use_collect2=no - ;; -tilegx-*-linux*) - tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}" - tmake_file="${tmake_file} tilegx/t-tilegx" - extra_objs="mul-tables.o" - c_target_objs="${c_target_objs} tilegx-c.o" - cxx_target_objs="${cxx_target_objs} tilegx-c.o" - extra_headers="feedback.h" - ;; -tilepro-*-linux*) - tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}" - tmake_file="${tmake_file} tilepro/t-tilepro" - extra_objs="mul-tables.o" - c_target_objs="${c_target_objs} tilepro-c.o" - cxx_target_objs="${cxx_target_objs} tilepro-c.o" - extra_headers="feedback.h" - ;; -v850-*-rtems*) - target_cpu_default="TARGET_CPU_generic" - tm_file="dbxelf.h elfos.h v850/v850.h" - tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h" - tmake_file="${tmake_file} v850/t-v850" - tmake_file="${tmake_file} t-rtems v850/t-rtems" - use_collect2=no - c_target_objs="v850-c.o" - cxx_target_objs="v850-c.o" - ;; -v850*-*-*) - case ${target} in - v850e3v5-*-*) - target_cpu_default="TARGET_CPU_v850e3v5" - ;; - v850e2v3-*-*) - target_cpu_default="TARGET_CPU_v850e2v3" - ;; - v850e2-*-*) - target_cpu_default="TARGET_CPU_v850e2" - ;; - v850e1-*-* | v850es-*-*) - target_cpu_default="TARGET_CPU_v850e1" - ;; - v850e-*-*) - target_cpu_default="TARGET_CPU_v850e" - ;; - v850-*-*) - target_cpu_default="TARGET_CPU_generic" - ;; - esac - tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h" - if test x$stabs = xyes - then - tm_file="${tm_file} dbx.h" - fi - use_collect2=no - c_target_objs="v850-c.o" - cxx_target_objs="v850-c.o" - use_gcc_stdint=wrap - ;; -vax-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h" - extra_options="${extra_options} vax/elf.opt" - ;; -vax-*-netbsdelf*) - tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h" - extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt" - ;; -vax-*-openbsd*) - tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h" - extra_options="${extra_options} openbsd.opt" - use_collect2=yes - ;; -xstormy16-*-elf) - # For historical reasons, the target files omit the 'x'. - tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h" - tm_p_file=stormy16/stormy16-protos.h - md_file=stormy16/stormy16.md - out_file=stormy16/stormy16.c - extra_options=stormy16/stormy16.opt - tmake_file="stormy16/t-stormy16" - ;; -xtensa*-*-elf*) - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h" - extra_options="${extra_options} xtensa/elf.opt" - ;; -xtensa*-*-linux*) - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h" - tmake_file="${tmake_file} xtensa/t-xtensa" - ;; -am33_2.0-*-linux*) - tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h" - gas=yes gnu_ld=yes - use_collect2=no - ;; -m32c-*-rtems*) - tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h" - tmake_file="${tmake_file} t-rtems" - c_target_objs="m32c-pragma.o" - cxx_target_objs="m32c-pragma.o" - ;; -m32c-*-elf*) - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}" - c_target_objs="m32c-pragma.o" - cxx_target_objs="m32c-pragma.o" - ;; -*) - echo "*** Configuration ${target} not supported" 1>&2 - exit 1 - ;; -esac - -case ${target} in -i[34567]86-*-linux* | x86_64-*-linux*) - tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386" - ;; -i[34567]86-*-* | x86_64-*-*) - tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386" - ;; -powerpc*-*-* | rs6000-*-*) - tm_file="${tm_file} rs6000/option-defaults.h" -esac - -if [ "$target_has_targetcm" = "no" ]; then - c_target_objs="$c_target_objs default-c.o" - cxx_target_objs="$cxx_target_objs default-c.o" -fi - -if [ "$common_out_file" = "" ]; then - if [ "$target_has_targetm_common" = "yes" ]; then - common_out_file="$cpu_type/$cpu_type-common.c" - else - common_out_file="default-common.c" - fi -fi - -# Support for --with-cpu and related options (and a few unrelated options, -# too). -case ${with_cpu} in - yes | no) - echo "--with-cpu must be passed a value" 1>&2 - exit 1 - ;; -esac - -# Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu -# to generic if there is no processor scheduler model for the target. -arch= -cpu= -arch_without_sse2=no -arch_without_64bit=no -case ${target} in - i386-*-freebsd*) - if test $fbsd_major -ge 6; then - arch=i486 - else - arch=i386 - fi - cpu=generic - arch_without_sse2=yes - arch_without_64bit=yes - ;; - i386-*-*) - arch=i386 - cpu=i386 - arch_without_sse2=yes - arch_without_64bit=yes - ;; - i486-*-*) - arch=i486 - cpu=i486 - arch_without_sse2=yes - arch_without_64bit=yes - ;; - i586-*-*) - arch_without_sse2=yes - arch_without_64bit=yes - case ${target_noncanonical} in - k6_2-*) - arch=k6-2 - cpu=k6-2 - ;; - k6_3-*) - arch=k6-3 - cpu=k6-3 - ;; - k6-*) - arch=k6 - cpu=k6 - ;; - pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*) - arch=pentium-mmx - cpu=pentium-mmx - ;; - *) - arch=pentium - cpu=pentium - ;; - esac - ;; - i686-*-* | i786-*-*) - case ${target_noncanonical} in - bdver3-*) - arch=bdver3 - cpu=bdver3 - ;; - bdver2-*) - arch=bdver2 - cpu=bdver2 - ;; - bdver1-*) - arch=bdver1 - cpu=bdver1 - ;; - btver1-*) - arch=btver1 - cpu=btver1 - ;; - btver2-*) - arch=btver2 - cpu=btver2 - ;; - amdfam10-*|barcelona-*) - arch=amdfam10 - cpu=amdfam10 - ;; - k8_sse3-*|opteron_sse3-*|athlon64_sse3-*) - arch=k8-sse3 - cpu=k8-sse3 - ;; - k8-*|opteron-*|athlon64-*|athlon_fx-*) - arch=k8 - cpu=k8 - ;; - athlon_xp-*|athlon_mp-*|athlon_4-*) - arch=athlon-4 - cpu=athlon-4 - arch_without_sse2=yes - arch_without_64bit=yes - ;; - athlon_tbird-*|athlon-*) - arch=athlon - cpu=athlon - arch_without_sse2=yes - ;; - geode-*) - arch=geode - cpu=geode - arch_without_sse2=yes - ;; - pentium2-*) - arch=pentium2 - cpu=pentium2 - arch_without_sse2=yes - ;; - pentium3-*|pentium3m-*) - arch=pentium3 - cpu=pentium3 - arch_without_sse2=yes - ;; - pentium4-*|pentium4m-*) - arch=pentium4 - cpu=pentium4 - ;; - prescott-*) - arch=prescott - cpu=prescott - ;; - nocona-*) - arch=nocona - cpu=nocona - ;; - atom-*) - arch=atom - cpu=atom - ;; - core2-*) - arch=core2 - cpu=core2 - ;; - corei7-*) - arch=corei7 - cpu=corei7 - ;; - corei7_avx-*) - arch=corei7-avx - cpu=corei7-avx - ;; - pentium_m-*) - arch=pentium-m - cpu=pentium-m - ;; - pentiumpro-*) - arch=pentiumpro - cpu=pentiumpro - arch_without_sse2=yes - ;; - *) - arch=pentiumpro - cpu=generic - arch_without_sse2=yes - arch_without_64bit=yes - ;; - esac - ;; - x86_64-*-*) - case ${target_noncanonical} in - bdver3-*) - arch=bdver3 - cpu=bdver3 - ;; - bdver2-*) - arch=bdver2 - cpu=bdver2 - ;; - bdver1-*) - arch=bdver1 - cpu=bdver1 - ;; - btver1-*) - arch=btver1 - cpu=btver1 - ;; - btver2-*) - arch=btver2 - cpu=btver2 - ;; - amdfam10-*|barcelona-*) - arch=amdfam10 - cpu=amdfam10 - ;; - k8_sse3-*|opteron_sse3-*|athlon64_sse3-*) - arch=k8-sse3 - cpu=k8-sse3 - ;; - k8-*|opteron-*|athlon_64-*) - arch=k8 - cpu=k8 - ;; - nocona-*) - arch=nocona - cpu=nocona - ;; - atom-*) - arch=atom - cpu=atom - ;; - core2-*) - arch=core2 - cpu=core2 - ;; - corei7-*) - arch=corei7 - cpu=corei7 - ;; - *) - arch=x86-64 - cpu=generic - ;; - esac - ;; -esac - -# If there is no $with_cpu option, try to infer one from ${target}. -# This block sets nothing except for with_cpu. -if test x$with_cpu = x ; then - case ${target} in - i[34567]86-*-*|x86_64-*-*) - with_cpu=$cpu - ;; - alphaev6[78]*-*-*) - with_cpu=ev67 - ;; - alphaev6*-*-*) - with_cpu=ev6 - ;; - alphapca56*-*-*) - with_cpu=pca56 - ;; - alphaev56*-*-*) - with_cpu=ev56 - ;; - alphaev5*-*-*) - with_cpu=ev5 - ;; - frv-*-*linux* | frv400-*-*linux*) - with_cpu=fr400 - ;; - frv550-*-*linux*) - with_cpu=fr550 - ;; - m68k*-*-*) - case "$with_arch" in - "cf") - with_cpu=${default_cf_cpu} - ;; - "" | "m68k") - with_cpu=m${default_m68k_cpu} - ;; - esac - ;; - mips*-*-vxworks) - with_arch=mips2 - ;; - powerpc*-*-*spe*) - if test x$enable_e500_double = xyes; then - with_cpu=8548 - else - with_cpu=8540 - fi - ;; - sparc-leon*-*) - with_cpu=v8; - ;; - sparc*-*-*) - with_cpu="`echo ${target} | sed 's/-.*$//'`" - ;; - esac - - # Avoid overriding --with-cpu-32 and --with-cpu-64 values. - case ${target} in - i[34567]86-*-*|x86_64-*-*) - if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then - if test x$with_cpu_32 = x; then - with_cpu_32=$with_cpu - fi - if test x$with_cpu_64 = x; then - with_cpu_64=$with_cpu - fi - with_cpu= - fi - ;; - esac -fi - -# Support for --with-arch and related options (and a few unrelated options, -# too). -case ${with_arch} in - yes | no) - echo "--with-arch must be passed a value" 1>&2 - exit 1 - ;; -esac - -# If there is no $with_arch option, try to infer one from ${target}. -# This block sets nothing except for with_arch. -if test x$with_arch = x ; then - case ${target} in - i[34567]86-*-darwin*|x86_64-*-darwin*) - # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT - # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h. - ;; - i[34567]86-*-*) - # --with-fpmath sets the default ISA to SSE2, which is the same - # ISA supported by Pentium 4. - if test x$with_fpmath = x || test $arch_without_sse2 = no; then - with_arch=$arch - else - with_arch=pentium4 - fi - ;; - x86_64-*-*) - with_arch=$arch - ;; - esac - - # Avoid overriding --with-arch-32 and --with-arch-64 values. - case ${target} in - i[34567]86-*-darwin*|x86_64-*-darwin*) - # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT - # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h. - ;; - i[34567]86-*-*|x86_64-*-*) - if test x$with_arch_32 != x || test x$with_arch_64 != x; then - if test x$with_arch_32 = x; then - with_arch_32=$with_arch - fi - if test x$with_arch_64 = x; then - if test $arch_without_64bit = yes; then - # Set the default 64bit arch to x86-64 if the default arch - # doesn't support 64bit. - with_arch_64=x86-64 - else - with_arch_64=$with_arch - fi - fi - with_arch= - elif test $arch_without_64bit$need_64bit_isa = yesyes; then - # Set the default 64bit arch to x86-64 if the default arch - # doesn't support 64bit and we need 64bit ISA. - with_arch_32=$with_arch - with_arch_64=x86-64 - with_arch= - fi - ;; - esac -fi - -# Support --with-fpmath. -if test x$with_fpmath != x; then - case ${target} in - i[34567]86-*-* | x86_64-*-*) - case ${with_fpmath} in - avx) - tm_file="${tm_file} i386/avxmath.h" - ;; - sse) - tm_file="${tm_file} i386/ssemath.h" - ;; - *) - echo "Invalid --with-fpmath=$with_fpmath" 1>&2 - exit 1 - ;; - esac - ;; - *) - echo "--with-fpmath isn't supported for $target." 1>&2 - exit 1 - ;; - esac -fi - -# Similarly for --with-schedule. -if test x$with_schedule = x; then - case ${target} in - hppa1*) - # Override default PA8000 scheduling model. - with_schedule=7100LC - ;; - esac -fi - -# Validate and mark as valid any --with options supported -# by this target. In order to use a particular --with option -# you must list it in supported_defaults; validating the value -# is optional. This case statement should set nothing besides -# supported_defaults. - -supported_defaults= -case "${target}" in - aarch64*-*-*) - supported_defaults="cpu arch" - for which in cpu arch; do - - eval "val=\$with_$which" - base_val=`echo $val | sed -e 's/\+.*//'` - ext_val=`echo $val | sed -e 's/[a-z0-9\-]\+//'` - - if [ $which = arch ]; then - def=aarch64-arches.def - pattern=AARCH64_ARCH - else - def=aarch64-cores.def - pattern=AARCH64_CORE - fi - - ext_mask=AARCH64_CPU_DEFAULT_FLAGS - - # Find the base CPU or ARCH id in aarch64-cores.def or - # aarch64-arches.def - if [ x"$base_val" = x ] \ - || grep "^$pattern(\"$base_val\"," \ - ${srcdir}/config/aarch64/$def \ - > /dev/null; then - - if [ $which = arch ]; then - base_id=`grep "^$pattern(\"$base_val\"," \ - ${srcdir}/config/aarch64/$def | \ - sed -e 's/^[^,]*,[ ]*//' | \ - sed -e 's/,.*$//'` - else - base_id=`grep "^$pattern(\"$base_val\"," \ - ${srcdir}/config/aarch64/$def | \ - sed -e 's/^[^,]*,[ ]*//' | \ - sed -e 's/,.*$//'` - fi - - while [ x"$ext_val" != x ] - do - ext_val=`echo $ext_val | sed -e 's/\+//'` - ext=`echo $ext_val | sed -e 's/\+.*//'` - base_ext=`echo $ext | sed -e 's/^no//'` - - if [ x"$base_ext" = x ] \ - || grep "^AARCH64_OPT_EXTENSION(\"$base_ext\"," \ - ${srcdir}/config/aarch64/aarch64-option-extensions.def \ - > /dev/null; then - - ext_on=`grep "^AARCH64_OPT_EXTENSION(\"$base_ext\"," \ - ${srcdir}/config/aarch64/aarch64-option-extensions.def | \ - sed -e 's/^[^,]*,[ ]*//' | \ - sed -e 's/,.*$//'` - ext_off=`grep "^AARCH64_OPT_EXTENSION(\"$base_ext\"," \ - ${srcdir}/config/aarch64/aarch64-option-extensions.def | \ - sed -e 's/^[^,]*,[ ]*[^,]*,[ ]*//' | \ - sed -e 's/,.*$//' | \ - sed -e 's/).*$//'` - - if [ $ext = $base_ext ]; then - # Adding extension - ext_mask="("$ext_mask") | ("$ext_on")" - else - # Removing extension - ext_mask="("$ext_mask") & ~("$ext_off")" - fi - - true - else - echo "Unknown extension used in --with-$which=$val" 1>&2 - exit 1 - fi - ext_val=`echo $ext_val | sed -e 's/[a-z0-9]\+//'` - done - - ext_mask="(("$ext_mask") << 6)" - if [ x"$base_id" != x ]; then - target_cpu_cname="TARGET_CPU_$base_id | $ext_mask" - fi - true - else - echo "Unknown $which used in --with-$which=$val" 1>&2 - exit 1 - fi - done - ;; - - alpha*-*-*) - supported_defaults="cpu tune" - for which in cpu tune; do - eval "val=\$with_$which" - case "$val" in - "" \ - | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \ - | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \ - | 21264a) - ;; - *) - echo "Unknown CPU used in --with-$which=$val" 1>&2 - exit 1 - ;; - esac - done - ;; - - arm*-*-*) - supported_defaults="arch cpu float tune fpu abi mode tls" - for which in cpu tune; do - # See if it matches any of the entries in arm-cores.def - eval "val=\$with_$which" - if [ x"$val" = x ] \ - || grep "^ARM_CORE(\"$val\"," \ - ${srcdir}/config/arm/arm-cores.def \ - > /dev/null; then - # Ok - new_val=`grep "^ARM_CORE(\"$val\"," \ - ${srcdir}/config/arm/arm-cores.def | \ - sed -e 's/^[^,]*,[ ]*//' | \ - sed -e 's/,.*$//'` - eval "target_${which}_cname=$new_val" - echo "For $val real value is $new_val" - true - else - echo "Unknown CPU used in --with-$which=$val" 1>&2 - exit 1 - fi - done - - case "$with_arch" in - "" \ - | armv[23456] | armv2a | armv3m | armv4t | armv5t \ - | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \ - | armv7 | armv7-a | armv7-r | armv7-m | armv8-a \ - | iwmmxt | ep9312) - # OK - ;; - *) - echo "Unknown arch used in --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - - case "$with_float" in - "" \ - | soft | hard | softfp) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - - case "$with_fpu" in - "" \ - | vfp | vfp3 | vfpv3 \ - | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \ - | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \ - | fpv4-sp-d16 | neon-vfpv4 | fp-arm-v8 | neon-fp-armv8 \ - | crypto-neon-fp-armv8) - # OK - ;; - *) - echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1 - exit 1 - ;; - esac - - case "$with_abi" in - "" \ - | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux ) - #OK - ;; - *) - echo "Unknown ABI used in --with-abi=$with_abi" - exit 1 - ;; - esac - - case "$with_mode" in - "" \ - | arm | thumb ) - #OK - ;; - *) - echo "Unknown mode used in --with-mode=$with_mode" - exit 1 - ;; - esac - - case "$with_tls" in - "" \ - | gnu | gnu2) - # OK - ;; - *) - echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2 - exit 1 - ;; - esac - - if test "x$with_arch" != x && test "x$with_cpu" != x; then - echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2 - fi - ;; - - fr*-*-*linux*) - supported_defaults=cpu - case "$with_cpu" in - fr400) ;; - fr550) ;; - *) - echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 - exit 1 - ;; - esac - ;; - - fido-*-* | m68k*-*-*) - supported_defaults="arch cpu" - case "$with_arch" in - "" | "m68k"| "cf") - m68k_arch_family="$with_arch" - ;; - *) - echo "Invalid --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - - # We always have a $with_cpu setting here. - case "$with_cpu" in - "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060") - m68k_cpu_ident=$with_cpu - ;; - "m68020-40") - m68k_cpu_ident=m68020 - tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40" - ;; - "m68020-60") - m68k_cpu_ident=m68020 - tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60" - ;; - *) - # We need the C identifier rather than the string. - m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \ - 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \ - $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \ - ${srcdir}/config/m68k/m68k-devices.def` - if [ x"$m68k_cpu_ident" = x ] ; then - echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2 - exit 1 - fi - with_cpu="mcpu=$with_cpu" - ;; - esac - ;; - - hppa*-*-*) - supported_defaults="arch schedule" - - case "$with_arch" in - "" | 1.0 | 1.1 | 2.0) - # OK - ;; - *) - echo "Unknown architecture used in --with-arch=$with_arch" 1>&2 - exit 1 - ;; - esac - - case "$with_schedule" in - "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000) - # OK - ;; - *) - echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2 - exit 1 - ;; - esac - ;; - - i[34567]86-*-* | x86_64-*-*) - supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64" - for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do - eval "val=\$with_$which" - case ${val} in - i386 | i486 \ - | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \ - | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \ - | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \ - | athlon-4 | athlon-xp | athlon-mp | geode \ - | prescott | pentium-m | pentium4m | pentium3m) - case "${target}" in - x86_64-*-*) - case "x$which" in - *_32) - ;; - *) - echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2 - exit 1 - ;; - esac - ;; - esac - # OK - ;; - "" | x86-64 | generic | native \ - | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \ - | opteron-sse3 | athlon-fx | bdver3 | bdver2 | bdver1 | btver2 \ - | btver1 | amdfam10 | barcelona | nocona | core2 | corei7 \ - | corei7-avx | core-avx-i | core-avx2 | atom) - # OK - ;; - *) - echo "Unknown CPU given in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - ;; - - mips*-*-*) - supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci" - - case ${with_float} in - "" | soft | hard) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - - case ${with_abi} in - "" | 32 | o64 | n32 | 64 | eabi) - # OK - ;; - *) - echo "Unknown ABI used in --with-abi=$with_abi" 1>&2 - exit 1 - ;; - esac - - case ${with_divide} in - "" | breaks | traps) - # OK - ;; - *) - echo "Unknown division check type use in --with-divide=$with_divide" 1>&2 - exit 1 - ;; - esac - - case ${with_llsc} in - yes) - with_llsc=llsc - ;; - no) - with_llsc="no-llsc" - ;; - "") - # OK - ;; - *) - echo "Unknown llsc type used in --with-llsc" 1>&2 - exit 1 - ;; - esac - - case ${with_mips_plt} in - yes) - with_mips_plt=plt - ;; - no) - with_mips_plt=no-plt - ;; - "") - ;; - *) - echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2 - exit 1 - ;; - esac - - case ${with_synci} in - yes) - with_synci=synci - ;; - no) - with_synci=no-synci - ;; - "") - ;; - *) - echo "Unknown synci type used in --with-synci" 1>&2 - exit 1 - ;; - esac - ;; - - powerpc*-*-* | rs6000-*-*) - supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64" - - for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do - eval "val=\$with_$which" - case ${val} in - default32 | default64) - case $which in - cpu | tune) - ;; - *) - echo "$val only valid for --with-cpu and --with-tune." 1>&2 - exit 1 - ;; - esac - with_which="with_$which" - eval $with_which= - ;; - 405cr) - tm_defines="${tm_defines} CONFIG_PPC405CR" - eval "with_$which=405" - ;; - "" | common \ - | power | power[2345678] | power6x | powerpc | powerpc64 \ - | rios | rios1 | rios2 | rsc | rsc1 | rs64a \ - | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \ - | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \ - | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \ - | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \ - | titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - ;; - - s390*-*-*) - supported_defaults="arch mode tune" - - for which in arch tune; do - eval "val=\$with_$which" - case ${val} in - "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - - case ${with_mode} in - "" | esa | zarch) - # OK - ;; - *) - echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2 - exit 1 - ;; - esac - ;; - - sh[123456ble]-*-* | sh-*-*) - supported_defaults="cpu" - case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in - "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu ) - # OK - ;; - m2a | m2a-single | m2a-single-only | m2a-nofpu) - ;; - m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al) - ;; - *) - echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2 - echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2 - echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2 - echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2 - exit 1 - ;; - esac - ;; - sparc*-*-*) - supported_defaults="cpu float tune" - - for which in cpu tune; do - eval "val=\$with_$which" - case ${val} in - "" | sparc | sparcv9 | sparc64 \ - | v7 | cypress \ - | v8 | supersparc | hypersparc | leon \ - | sparclite | f930 | f934 | sparclite86x \ - | sparclet | tsc701 \ - | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \ - | niagara3 | niagara4) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val" 1>&2 - exit 1 - ;; - esac - done - - case ${with_float} in - "" | soft | hard) - # OK - ;; - *) - echo "Unknown floating point type used in --with-float=$with_float" 1>&2 - exit 1 - ;; - esac - ;; - - spu-*-*) - supported_defaults="arch tune" - - for which in arch tune; do - eval "val=\$with_$which" - case ${val} in - "" | cell | celledp) - # OK - ;; - *) - echo "Unknown cpu used in --with-$which=$val." 1>&2 - exit 1 - ;; - esac - done - ;; - - tic6x-*-*) - supported_defaults="arch" - - case ${with_arch} in - "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x) - # OK - ;; - *) - echo "Unknown arch used in --with-arch=$with_arch." 1>&2 - exit 1 - ;; - esac - ;; - - v850*-*-*) - supported_defaults=cpu - case ${with_cpu} in - "" | v850e | v850e1 | v850e2 | v850es | v850e2v3 | v850e3v5) - # OK - ;; - *) - echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2 - exit 1 - ;; - esac - ;; -esac - -# Set some miscellaneous flags for particular targets. -target_cpu_default2= -case ${target} in - aarch64*-*-*) - if test x$target_cpu_cname = x - then - target_cpu_default2=TARGET_CPU_generic - else - target_cpu_default2=$target_cpu_cname - fi - ;; - - arm*-*-*) - if test x$target_cpu_cname = x - then - target_cpu_default2=TARGET_CPU_generic - else - target_cpu_default2=TARGET_CPU_$target_cpu_cname - fi - ;; - - hppa*-*-*) - target_cpu_default2="MASK_BIG_SWITCH" - if test x$gas = xyes - then - target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY" - fi - ;; - - fido*-*-* | m68k*-*-*) - target_cpu_default2=$m68k_cpu_ident - tmake_file="m68k/t-opts $tmake_file" - if [ x"$m68k_arch_family" != x ]; then - tmake_file="m68k/t-$m68k_arch_family $tmake_file" - fi - ;; - - i[34567]86-*-darwin* | x86_64-*-darwin*) - ;; - i[34567]86-*-linux* | x86_64-*-linux*) - tmake_file="$tmake_file i386/t-linux" - ;; - i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu) - tmake_file="$tmake_file i386/t-kfreebsd" - ;; - i[34567]86-*-gnu*) - tmake_file="$tmake_file i386/t-gnu" - ;; - i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*) - ;; - i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*) - ;; - i[34567]86-*-freebsd* | x86_64-*-freebsd*) - ;; - ia64*-*-linux*) - ;; - - mips*-*-*) - if test x$gnu_ld = xyes - then - target_cpu_default2="MASK_SPLIT_ADDRESSES" - fi - case ${target} in - mips*el-*-*) - tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines" - ;; - esac - tmake_file="mips/t-mips $tmake_file" - ;; - - powerpc*-*-* | rs6000-*-*) - # FIXME: The PowerPC port uses the value set at compile time, - # although it's only cosmetic. - if test "x$with_cpu" != x - then - target_cpu_default2="\\\"$with_cpu\\\"" - fi - out_file=rs6000/rs6000.c - c_target_objs="${c_target_objs} rs6000-c.o" - cxx_target_objs="${cxx_target_objs} rs6000-c.o" - tmake_file="rs6000/t-rs6000 ${tmake_file}" - ;; - - sh[123456ble]*-*-* | sh-*-*) - c_target_objs="${c_target_objs} sh-c.o" - cxx_target_objs="${cxx_target_objs} sh-c.o" - ;; - - sparc-leon*-*) - if test x$with_tune = x ; then - with_tune=leon; - fi - - # The SPARC port checks this value at compile-time. - target_cpu_default2="TARGET_CPU_$with_cpu" - ;; - - sparc*-*-*) - # Some standard aliases. - case x$with_cpu in - xsparc) - with_cpu=v7 - ;; - xsparcv9 | xsparc64) - with_cpu=v9 - ;; - esac - - # The SPARC port checks this value at compile-time. - target_cpu_default2="TARGET_CPU_$with_cpu" - ;; - - v850*-*-*) - case "x$with_cpu" in - x) - ;; - xv850e | xv850e1 | xv850e2 | xv850e2v3 | xv850e3v5) - target_cpu_default2="TARGET_CPU_$with_cpu" - ;; - xv850es) - target_cpu_default2="TARGET_CPU_v850e1" - ;; - esac - ;; -esac - -t= -all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls" -for option in $all_defaults -do - eval "val=\$with_"`echo $option | sed s/-/_/g` - if test -n "$val"; then - case " $supported_defaults " in - *" $option "*) - ;; - *) - echo "This target does not support --with-$option." 2>&1 - echo "Valid --with options are: $supported_defaults" 2>&1 - exit 1 - ;; - esac - - if test "x$t" = x - then - t="{ \"$option\", \"$val\" }" - else - t="${t}, { \"$option\", \"$val\" }" - fi - fi -done - -if test "x$t" = x -then - configure_default_options="{ { NULL, NULL} }" -else - configure_default_options="{ ${t} }" -fi - -if test "$target_cpu_default2" != "" -then - if test "$target_cpu_default" != "" - then - target_cpu_default="(${target_cpu_default}|${target_cpu_default2})" - else - target_cpu_default=$target_cpu_default2 - fi -fi |