diff options
Diffstat (limited to 'gcc-4.4.3/contrib/texi2pod.pl')
| -rwxr-xr-x | gcc-4.4.3/contrib/texi2pod.pl | 495 |
1 files changed, 0 insertions, 495 deletions
diff --git a/gcc-4.4.3/contrib/texi2pod.pl b/gcc-4.4.3/contrib/texi2pod.pl deleted file mode 100755 index fcdc14550..000000000 --- a/gcc-4.4.3/contrib/texi2pod.pl +++ /dev/null @@ -1,495 +0,0 @@ -#! /usr/bin/perl -w - -# Copyright (C) 1999, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This file is part of GCC. - -# GCC is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3, or (at your option) -# any later version. - -# GCC is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with GCC; see the file COPYING. If not, write to -# the Free Software Foundation, 51 Franklin Street, Fifth Floor, -# Boston MA 02110-1301, USA. - -# This does trivial (and I mean _trivial_) conversion of Texinfo -# markup to Perl POD format. It's intended to be used to extract -# something suitable for a manpage from a Texinfo document. - -$output = 0; -$skipping = 0; -%sects = (); -$section = ""; -@icstack = (); -@endwstack = (); -@skstack = (); -@instack = (); -$shift = ""; -%defs = (); -$fnno = 1; -$inf = ""; -$ibase = ""; -@ipath = (); - -while ($_ = shift) { - if (/^-D(.*)$/) { - if ($1 ne "") { - $flag = $1; - } else { - $flag = shift; - } - $value = ""; - ($flag, $value) = ($flag =~ /^([^=]+)(?:=(.+))?/); - die "no flag specified for -D\n" - unless $flag ne ""; - die "flags may only contain letters, digits, hyphens, dashes and underscores\n" - unless $flag =~ /^[a-zA-Z0-9_-]+$/; - $defs{$flag} = $value; - } elsif (/^-I(.*)$/) { - if ($1 ne "") { - $flag = $1; - } else { - $flag = shift; - } - push (@ipath, $flag); - } elsif (/^-/) { - usage(); - } else { - $in = $_, next unless defined $in; - $out = $_, next unless defined $out; - usage(); - } -} - -if (defined $in) { - $inf = gensym(); - open($inf, "<$in") or die "opening \"$in\": $!\n"; - $ibase = $1 if $in =~ m|^(.+)/[^/]+$|; -} else { - $inf = \*STDIN; -} - -if (defined $out) { - open(STDOUT, ">$out") or die "opening \"$out\": $!\n"; -} - -while(defined $inf) { -while(<$inf>) { - # Certain commands are discarded without further processing. - /^\@(?: - [a-z]+index # @*index: useful only in complete manual - |need # @need: useful only in printed manual - |(?:end\s+)?group # @group .. @end group: ditto - |page # @page: ditto - |node # @node: useful only in .info file - |(?:end\s+)?ifnottex # @ifnottex .. @end ifnottex: use contents - )\b/x and next; - - chomp; - - # Look for filename and title markers. - /^\@setfilename\s+([^.]+)/ and $fn = $1, next; - /^\@settitle\s+([^.]+)/ and $tl = postprocess($1), next; - - # Identify a man title but keep only the one we are interested in. - /^\@c\s+man\s+title\s+([A-Za-z0-9-]+)\s+(.+)/ and do { - if (exists $defs{$1}) { - $fn = $1; - $tl = postprocess($2); - } - next; - }; - - # Look for blocks surrounded by @c man begin SECTION ... @c man end. - # This really oughta be @ifman ... @end ifman and the like, but such - # would require rev'ing all other Texinfo translators. - /^\@c\s+man\s+begin\s+([A-Z]+)\s+([A-Za-z0-9-]+)/ and do { - $output = 1 if exists $defs{$2}; - $sect = $1; - next; - }; - /^\@c\s+man\s+begin\s+([A-Z]+)/ and $sect = $1, $output = 1, next; - /^\@c\s+man\s+end/ and do { - $sects{$sect} = "" unless exists $sects{$sect}; - $sects{$sect} .= postprocess($section); - $section = ""; - $output = 0; - next; - }; - - # handle variables - /^\@set\s+([a-zA-Z0-9_-]+)\s*(.*)$/ and do { - $defs{$1} = $2; - next; - }; - /^\@clear\s+([a-zA-Z0-9_-]+)/ and do { - delete $defs{$1}; - next; - }; - - next unless $output; - - # Discard comments. (Can't do it above, because then we'd never see - # @c man lines.) - /^\@c\b/ and next; - - # End-block handler goes up here because it needs to operate even - # if we are skipping. - /^\@end\s+([a-z]+)/ and do { - # Ignore @end foo, where foo is not an operation which may - # cause us to skip, if we are presently skipping. - my $ended = $1; - next if $skipping && $ended !~ /^(?:ifset|ifclear|ignore|menu|iftex|copying)$/; - - die "\@end $ended without \@$ended at line $.\n" unless defined $endw; - die "\@$endw ended by \@end $ended at line $.\n" unless $ended eq $endw; - - $endw = pop @endwstack; - - if ($ended =~ /^(?:ifset|ifclear|ignore|menu|iftex)$/) { - $skipping = pop @skstack; - next; - } elsif ($ended =~ /^(?:example|smallexample|display)$/) { - $shift = ""; - $_ = ""; # need a paragraph break - } elsif ($ended =~ /^(?:itemize|enumerate|[fv]?table)$/) { - $_ = "\n=back\n"; - $ic = pop @icstack; - } elsif ($ended eq "multitable") { - $_ = "\n=back\n"; - } else { - die "unknown command \@end $ended at line $.\n"; - } - }; - - # We must handle commands which can cause skipping even while we - # are skipping, otherwise we will not process nested conditionals - # correctly. - /^\@ifset\s+([a-zA-Z0-9_-]+)/ and do { - push @endwstack, $endw; - push @skstack, $skipping; - $endw = "ifset"; - $skipping = 1 unless exists $defs{$1}; - next; - }; - - /^\@ifclear\s+([a-zA-Z0-9_-]+)/ and do { - push @endwstack, $endw; - push @skstack, $skipping; - $endw = "ifclear"; - $skipping = 1 if exists $defs{$1}; - next; - }; - - /^\@(ignore|menu|iftex|copying)\b/ and do { - push @endwstack, $endw; - push @skstack, $skipping; - $endw = $1; - $skipping = 1; - next; - }; - - next if $skipping; - - # Character entities. First the ones that can be replaced by raw text - # or discarded outright: - s/\@copyright\{\}/(c)/g; - s/\@dots\{\}/.../g; - s/\@enddots\{\}/..../g; - s/\@([.!? ])/$1/g; - s/\@[:-]//g; - s/\@bullet(?:\{\})?/*/g; - s/\@TeX\{\}/TeX/g; - s/\@pounds\{\}/\#/g; - s/\@minus(?:\{\})?/-/g; - s/\\,/,/g; - - # Now the ones that have to be replaced by special escapes - # (which will be turned back into text by unmunge()) - s/&/&/g; - s/\@\{/{/g; - s/\@\}/}/g; - s/\@\@/&at;/g; - - # Inside a verbatim block, handle @var, @samp and @url specially. - if ($shift ne "") { - s/\@var\{([^\}]*)\}/<$1>/g; - s/\@samp\{([^\}]*)\}/"$1"/g; - s/\@url\{([^\}]*)\}/<$1>/g; - } - - # POD doesn't interpret E<> inside a verbatim block. - if ($shift eq "") { - s/</</g; - s/>/>/g; - } else { - s/</</g; - s/>/>/g; - } - - # Single line command handlers. - - /^\@include\s+(.+)$/ and do { - push @instack, $inf; - $inf = gensym(); - $file = postprocess($1); - - # Try cwd and $ibase, then explicit -I paths. - $done = 0; - foreach $path ("", $ibase, @ipath) { - $mypath = $file; - $mypath = $path . "/" . $mypath if ($path ne ""); - open($inf, "<" . $mypath) and ($done = 1, last); - } - die "cannot find $file" if !$done; - next; - }; - - /^\@(?:section|unnumbered|unnumberedsec|center|heading)\s+(.+)$/ - and $_ = "\n=head2 $1\n"; - /^\@subsection\s+(.+)$/ - and $_ = "\n=head3 $1\n"; - /^\@subsubsection\s+(.+)$/ - and $_ = "\n=head4 $1\n"; - - # Block command handlers: - /^\@itemize(?:\s+(\@[a-z]+|\*|-))?/ and do { - push @endwstack, $endw; - push @icstack, $ic; - if (defined $1) { - $ic = $1; - } else { - $ic = '*'; - } - $_ = "\n=over 4\n"; - $endw = "itemize"; - }; - - /^\@enumerate(?:\s+([a-zA-Z0-9]+))?/ and do { - push @endwstack, $endw; - push @icstack, $ic; - if (defined $1) { - $ic = $1 . "."; - } else { - $ic = "1."; - } - $_ = "\n=over 4\n"; - $endw = "enumerate"; - }; - - /^\@multitable\s.*/ and do { - push @endwstack, $endw; - $endw = "multitable"; - $_ = "\n=over 4\n"; - }; - - /^\@([fv]?table)\s+(\@[a-z]+)/ and do { - push @endwstack, $endw; - push @icstack, $ic; - $endw = $1; - $ic = $2; - $ic =~ s/\@(?:samp|strong|key|gcctabopt|env)/B/; - $ic =~ s/\@(?:code|kbd)/C/; - $ic =~ s/\@(?:dfn|var|emph|cite|i)/I/; - $ic =~ s/\@(?:file)/F/; - $ic =~ s/\@(?:asis)//; - $_ = "\n=over 4\n"; - }; - - /^\@((?:small)?example|display)/ and do { - push @endwstack, $endw; - $endw = $1; - $shift = "\t"; - $_ = ""; # need a paragraph break - }; - - /^\@item\s+(.*\S)\s*$/ and $endw eq "multitable" and do { - @columns = (); - for $column (split (/\s*\@tab\s*/, $1)) { - # @strong{...} is used a @headitem work-alike - $column =~ s/^\@strong{(.*)}$/$1/; - push @columns, $column; - } - $_ = "\n=item ".join (" : ", @columns)."\n"; - }; - - /^\@itemx?\s*(.+)?$/ and do { - if (defined $1) { - if ($ic) { - if ($endw eq "enumerate") { - $_ = "\n=item $ic $1\n"; - $ic =~ s/(\d+)/$1 + 1/eg; - } else { - # Entity escapes prevent munging by the <> - # processing below. - $_ = "\n=item $ic\<$1\>\n"; - } - } else { - $_ = "\n=item $1\n"; - } - } else { - $_ = "\n=item $ic\n"; - $ic =~ y/A-Ya-y/B-Zb-z/; - $ic =~ s/(\d+)/$1 + 1/eg; - } - }; - - $section .= $shift.$_."\n"; -} -# End of current file. -close($inf); -$inf = pop @instack; -} - -die "No filename or title\n" unless defined $fn && defined $tl; - -$sects{NAME} = "$fn \- $tl\n"; -$sects{FOOTNOTES} .= "=back\n" if exists $sects{FOOTNOTES}; - -for $sect (qw(NAME SYNOPSIS DESCRIPTION OPTIONS ENVIRONMENT FILES - BUGS NOTES FOOTNOTES SEEALSO AUTHOR COPYRIGHT)) { - if(exists $sects{$sect}) { - $head = $sect; - $head =~ s/SEEALSO/SEE ALSO/; - print "=head1 $head\n\n"; - print scalar unmunge ($sects{$sect}); - print "\n"; - } -} - -sub usage -{ - die "usage: $0 [-D toggle...] [infile [outfile]]\n"; -} - -sub postprocess -{ - local $_ = $_[0]; - - # @value{foo} is replaced by whatever 'foo' is defined as. - while (m/(\@value\{([a-zA-Z0-9_-]+)\})/g) { - if (! exists $defs{$2}) { - print STDERR "Option $2 not defined\n"; - s/\Q$1\E//; - } else { - $value = $defs{$2}; - s/\Q$1\E/$value/; - } - } - - # Formatting commands. - # Temporary escape for @r. - s/\@r\{([^\}]*)\}/R<$1>/g; - s/\@(?:dfn|var|emph|cite|i)\{([^\}]*)\}/I<$1>/g; - s/\@(?:code|kbd)\{([^\}]*)\}/C<$1>/g; - s/\@(?:samp|strong|key|option|env|command|b)\{([^\}]*)\}/B<$1>/g; - s/\@sc\{([^\}]*)\}/\U$1/g; - s/\@file\{([^\}]*)\}/F<$1>/g; - s/\@w\{([^\}]*)\}/S<$1>/g; - s/\@(?:dmn|math)\{([^\}]*)\}/$1/g; - - # keep references of the form @ref{...}, print them bold - s/\@(?:ref)\{([^\}]*)\}/B<$1>/g; - - # Change double single quotes to double quotes. - s/''/"/g; - s/``/"/g; - - # Cross references are thrown away, as are @noindent and @refill. - # (@noindent is impossible in .pod, and @refill is unnecessary.) - # @* is also impossible in .pod; we discard it and any newline that - # follows it. Similarly, our macro @gol must be discarded. - - s/\(?\@xref\{(?:[^\}]*)\}(?:[^.<]|(?:<[^<>]*>))*\.\)?//g; - s/\s+\(\@pxref\{(?:[^\}]*)\}\)//g; - s/;\s+\@pxref\{(?:[^\}]*)\}//g; - s/\@noindent\s*//g; - s/\@refill//g; - s/\@gol//g; - s/\@\*\s*\n?//g; - - # Anchors are thrown away - s/\@anchor\{(?:[^\}]*)\}//g; - - # @uref can take one, two, or three arguments, with different - # semantics each time. @url and @email are just like @uref with - # one argument, for our purposes. - s/\@(?:uref|url|email)\{([^\},]*)\}/<B<$1>>/g; - s/\@uref\{([^\},]*),([^\},]*)\}/$2 (C<$1>)/g; - s/\@uref\{([^\},]*),([^\},]*),([^\},]*)\}/$3/g; - - # Handle gccoptlist here, so it can contain the above formatting - # commands. - s/\@gccoptlist\{([^\}]*)\}/B<$1>/g; - - # Un-escape <> at this point. - s/</</g; - s/>/>/g; - - # Now un-nest all B<>, I<>, R<>. Theoretically we could have - # indefinitely deep nesting; in practice, one level suffices. - 1 while s/([BIR])<([^<>]*)([BIR])<([^<>]*)>/$1<$2>$3<$4>$1</g; - - # Replace R<...> with bare ...; eliminate empty markup, B<>; - # shift white space at the ends of [BI]<...> expressions outside - # the expression. - s/R<([^<>]*)>/$1/g; - s/[BI]<>//g; - s/([BI])<(\s+)([^>]+)>/$2$1<$3>/g; - s/([BI])<([^>]+?)(\s+)>/$1<$2>$3/g; - - # Extract footnotes. This has to be done after all other - # processing because otherwise the regexp will choke on formatting - # inside @footnote. - while (/\@footnote/g) { - s/\@footnote\{([^\}]+)\}/[$fnno]/; - add_footnote($1, $fnno); - $fnno++; - } - - return $_; -} - -sub unmunge -{ - # Replace escaped symbols with their equivalents. - local $_ = $_[0]; - - s/</E<lt>/g; - s/>/E<gt>/g; - s/{/\{/g; - s/}/\}/g; - s/&at;/\@/g; - s/&/&/g; - return $_; -} - -sub add_footnote -{ - unless (exists $sects{FOOTNOTES}) { - $sects{FOOTNOTES} = "\n=over 4\n\n"; - } - - $sects{FOOTNOTES} .= "=item $fnno.\n\n"; $fnno++; - $sects{FOOTNOTES} .= $_[0]; - $sects{FOOTNOTES} .= "\n\n"; -} - -# stolen from Symbol.pm -{ - my $genseq = 0; - sub gensym - { - my $name = "GEN" . $genseq++; - my $ref = \*{$name}; - delete $::{$name}; - return $ref; - } -} |