diff options
Diffstat (limited to 'gcc-4.3.1/gcc/ada/sinput.ads')
| -rw-r--r-- | gcc-4.3.1/gcc/ada/sinput.ads | 803 |
1 files changed, 803 insertions, 0 deletions
diff --git a/gcc-4.3.1/gcc/ada/sinput.ads b/gcc-4.3.1/gcc/ada/sinput.ads new file mode 100644 index 000000000..db240ff5b --- /dev/null +++ b/gcc-4.3.1/gcc/ada/sinput.ads @@ -0,0 +1,803 @@ +------------------------------------------------------------------------------ +-- -- +-- GNAT COMPILER COMPONENTS -- +-- -- +-- S I N P U T -- +-- -- +-- S p e c -- +-- -- +-- Copyright (C) 1992-2007, Free Software Foundation, Inc. -- +-- -- +-- GNAT is free software; you can redistribute it and/or modify it under -- +-- terms of the GNU General Public License as published by the Free Soft- -- +-- ware Foundation; either version 2, or (at your option) any later ver- -- +-- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- +-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- +-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- +-- for more details. You should have received a copy of the GNU General -- +-- Public License distributed with GNAT; see file COPYING. If not, write -- +-- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, -- +-- Boston, MA 02110-1301, USA. -- +-- -- +-- As a special exception, if other files instantiate generics from this -- +-- unit, or you link this unit with other files to produce an executable, -- +-- this unit does not by itself cause the resulting executable to be -- +-- covered by the GNU General Public License. This exception does not -- +-- however invalidate any other reasons why the executable file might be -- +-- covered by the GNU Public License. -- +-- -- +-- GNAT was originally developed by the GNAT team at New York University. -- +-- Extensive contributions were provided by Ada Core Technologies Inc. -- +-- -- +------------------------------------------------------------------------------ + +-- This package contains the input routines used for reading the +-- input source file. The actual I/O routines are in OS_Interface, +-- with this module containing only the system independent processing. + +-- General Note: throughout the compiler, we use the term line or source +-- line to refer to a physical line in the source, terminated by the end of +-- physical line sequence. + +-- There are two distinct concepts of line terminator in GNAT + +-- A logical line terminator is what corresponds to the "end of a line" as +-- described in RM 2.2 (13). Any of the characters FF, LF, CR or VT or any +-- wide character that is a Line or Paragraph Separator acts as an end of +-- logical line in this sense, and it is essentially irrelevant whether one +-- or more appears in sequence (since if sequence of such characters is +-- regarded as separate ends of line, then the intervening logical lines +-- are null in any case). + +-- A physical line terminator is a sequence of format effectors that is +-- treated as ending a physical line. Physical lines have no Ada semantic +-- significance, but they are significant for error reporting purposes, +-- since errors are identified by line and column location. + +-- In GNAT, a physical line is ended by any of the sequences LF, CR/LF, CR or +-- LF/CR. LF is used in typical Unix systems, CR/LF in DOS systems, and CR +-- alone in System 7. We don't know of any system using LF/CR, but it seems +-- reasonable to include this case for consistency. In addition, we recognize +-- any of these sequences in any of the operating systems, for better +-- behavior in treating foreign files (e.g. a Unix file with LF terminators +-- transferred to a DOS system). Finally, wide character codes in cagtegories +-- Separator, Line and Separator, Paragraph are considered to be physical +-- line terminators. + +with Alloc; +with Casing; use Casing; +with Namet; use Namet; +with Table; +with Types; use Types; + +package Sinput is + + type Type_Of_File is ( + -- Indicates type of file being read + + Src, + -- Normal Ada source file + + Config, + -- Configuration pragma file + + Def, + -- Preprocessing definition file + + Preproc); + -- Source file with preprocessing commands to be preprocessed + + ---------------------------- + -- Source License Control -- + ---------------------------- + + -- The following type indicates the license state of a source if it + -- is known. + + type License_Type is + (Unknown, + -- Licensing status of this source unit is unknown + + Restricted, + -- This is a non-GPL'ed unit that is restricted from depending + -- on GPL'ed units (e.g. proprietary code is in this category) + + GPL, + -- This file is licensed under the unmodified GPL. It is not allowed + -- to depend on Non_GPL units, and Non_GPL units may not depend on + -- this source unit. + + Modified_GPL, + -- This file is licensed under the GNAT modified GPL (see header of + -- This file for wording of the modification). It may depend on other + -- Modified_GPL units or on unrestricted units. + + Unrestricted); + -- The license on this file is permitted to depend on any other + -- units, or have other units depend on it, without violating the + -- license of this unit. Examples are public domain units, and + -- units defined in the RM). + + -- The above license status is checked when the appropriate check is + -- activated and one source depends on another, and the licensing state + -- of both files is known: + + -- The prohibited combinations are: + + -- Restricted file may not depend on GPL file + + -- GPL file may not depend on Restricted file + + -- Modified GPL file may not depend on Restricted file + -- Modified_GPL file may not depend on GPL file + + -- The reason for the last restriction here is that a client depending + -- on a modified GPL file must be sure that the license condition is + -- correct considered transitively. + + -- The licensing status is determined either by the presence of a + -- specific pragma License, or by scanning the header for a predefined + -- file, or any file if compiling in -gnatg mode. + + ----------------------- + -- Source File Table -- + ----------------------- + + -- The source file table has an entry for each source file read in for + -- this run of the compiler. This table is (default) initialized when + -- the compiler is loaded, and simply accumulates entries as compilation + -- proceeds and various routines in Sinput and its child packages are + -- called to load required source files. + + -- Virtual entries are also created for generic templates when they are + -- instantiated, as described in a separate section later on. + + -- In the case where there are multiple main units (e.g. in the case of + -- the cross-reference tool), this table is not reset between these units, + -- so that a given source file is only read once if it is used by two + -- separate main units. + + -- The entries in the table are accessed using a Source_File_Index that + -- ranges from 1 to Last_Source_File. Each entry has the following fields + + -- Note: fields marked read-only are set by Sinput or one of its child + -- packages when a source file table entry is created, and cannot be + -- subsqently modified, or alternatively are set only by very special + -- circumstances, documented in the comments. + + -- File_Name : File_Name_Type (read-only) + -- Name of the source file (simple name with no directory information) + + -- Full_File_Name : File_Name_Type (read-only) + -- Full file name (full name with directory info), used for generation + -- of error messages, etc. + + -- File_Type : Type_Of_File (read-only) + -- Indicates type of file (source file, configuration pragmas file, + -- preprocessor definition file, preprocessor input file). + + -- Reference_Name : File_Name_Type (read-only) + -- Name to be used for source file references in error messages where + -- only the simple name of the file is required. Identical to File_Name + -- unless pragma Source_Reference is used to change it. Only processing + -- for the Source_Reference pragma circuit may set this field. + + -- Full_Ref_Name : File_Name_Type (read-only) + -- Name to be used for source file references in error messages where + -- the full name of the file is required. Identical to Full_File_Name + -- unless pragma Source_Reference is used to change it. Only processing + -- for the Source_Reference pragma may set this field. + + -- Debug_Source_Name : File_Name_Type (read-only) + -- Name to be used for source file references in debugging information + -- where only the simple name of the file is required. Identical to + -- Reference_Name unless the -gnatD (debug source file) switch is used. + -- Only processing in Sprint that generates this file is permitted to + -- set this field. + + -- Full_Debug_Name : File_Name_Type (read-only) + -- Name to be used for source file references in debugging information + -- where the full name of the file is required. This is identical to + -- Full_Ref_Name unless the -gnatD (debug source file) switch is used. + -- Only processing in Sprint that generates this file is permitted to + -- set this field. + + -- License : License_Type; + -- License status of source file + + -- Num_SRef_Pragmas : Nat; + -- Number of source reference pragmas present in source file + + -- First_Mapped_Line : Logical_Line_Number; + -- This field stores logical line number of the first line in the + -- file that is not a Source_Reference pragma. If no source reference + -- pragmas are used, then the value is set to No_Line_Number. + + -- Source_Text : Source_Buffer_Ptr (read-only) + -- Text of source file. Note that every source file has a distinct set + -- of non-overlapping logical bounds, so it is possible to determine + -- which file is referenced from a given subscript (Source_Ptr) value. + + -- Source_First : Source_Ptr; (read-only) + -- Subscript of first character in Source_Text. Note that this cannot + -- be obtained as Source_Text'First, because we use virtual origin + -- addressing. + + -- Source_Last : Source_Ptr; (read-only) + -- Subscript of last character in Source_Text. Note that this cannot + -- be obtained as Source_Text'Last, because we use virtual origin + -- addressing, so this value is always Source_Ptr'Last. + + -- Time_Stamp : Time_Stamp_Type; (read-only) + -- Time stamp of the source file + + -- Source_Checksum : Word; + -- Computed checksum for contents of source file. See separate section + -- later on in this spec for a description of the checksum algorithm. + + -- Last_Source_Line : Physical_Line_Number; + -- Physical line number of last source line. Whlie a file is being + -- read, this refers to the last line scanned. Once a file has been + -- completely scanned, it is the number of the last line in the file, + -- and hence also gives the number of source lines in the file. + + -- Keyword_Casing : Casing_Type; + -- Casing style used in file for keyword casing. This is initialized + -- to Unknown, and then set from the first occurrence of a keyword. + -- This value is used only for formatting of error messages. + + -- Identifier_Casing : Casing_Type; + -- Casing style used in file for identifier casing. This is initialized + -- to Unknown, and then set from an identifier in the program as soon as + -- one is found whose casing is sufficiently clear to make a decision. + -- This value is used for formatting of error messages, and also is used + -- in the detection of keywords misused as identifiers. + + -- Instantiation : Source_Ptr; + -- Source file location of the instantiation if this source file entry + -- represents a generic instantiation. Set to No_Location for the case + -- of a normal non-instantiation entry. See section below for details. + -- This field is read-only for clients. + + -- Inlined_Body : Boolean; + -- This can only be set True if Instantiation has a value other than + -- No_Location. If true it indicates that the instantiation is actually + -- an instance of an inlined body. + + -- Template : Source_File_Index; (read-only) + -- Source file index of the source file containing the template if this + -- is a generic instantiation. Set to No_Source_File for the normal case + -- of a non-instantiation entry. See Sinput-L for details. + + -- Unit : Unit_Number_Type; + -- Identifies the unit contained in this source file. Set by + -- Initialize_Scanner, must not be subsequently altered. + + -- The source file table is accessed by clients using the following + -- subprogram interface: + + subtype SFI is Source_File_Index; + + System_Source_File_Index : SFI; + -- The file system.ads is always read by the compiler to determine the + -- settings of the target parameters in the private part of System. This + -- variable records the source file index of system.ads. Typically this + -- will be 1 since system.ads is read first. + + function Debug_Source_Name (S : SFI) return File_Name_Type; + function File_Name (S : SFI) return File_Name_Type; + function File_Type (S : SFI) return Type_Of_File; + function First_Mapped_Line (S : SFI) return Logical_Line_Number; + function Full_Debug_Name (S : SFI) return File_Name_Type; + function Full_File_Name (S : SFI) return File_Name_Type; + function Full_Ref_Name (S : SFI) return File_Name_Type; + function Identifier_Casing (S : SFI) return Casing_Type; + function Inlined_Body (S : SFI) return Boolean; + function Instantiation (S : SFI) return Source_Ptr; + function Keyword_Casing (S : SFI) return Casing_Type; + function Last_Source_Line (S : SFI) return Physical_Line_Number; + function License (S : SFI) return License_Type; + function Num_SRef_Pragmas (S : SFI) return Nat; + function Reference_Name (S : SFI) return File_Name_Type; + function Source_Checksum (S : SFI) return Word; + function Source_First (S : SFI) return Source_Ptr; + function Source_Last (S : SFI) return Source_Ptr; + function Source_Text (S : SFI) return Source_Buffer_Ptr; + function Template (S : SFI) return Source_File_Index; + function Unit (S : SFI) return Unit_Number_Type; + function Time_Stamp (S : SFI) return Time_Stamp_Type; + + procedure Set_Keyword_Casing (S : SFI; C : Casing_Type); + procedure Set_Identifier_Casing (S : SFI; C : Casing_Type); + procedure Set_License (S : SFI; L : License_Type); + procedure Set_Unit (S : SFI; U : Unit_Number_Type); + + function Last_Source_File return Source_File_Index; + -- Index of last source file table entry + + function Num_Source_Files return Nat; + -- Number of source file table entries + + procedure Initialize; + -- Initialize internal tables + + procedure Lock; + -- Lock internal tables + + procedure Unlock; + -- Unlock internal tables + + Main_Source_File : Source_File_Index := No_Source_File; + -- This is set to the source file index of the main unit + + ----------------------------- + -- Source_File_Index_Table -- + ----------------------------- + + -- The Get_Source_File_Index function is called very frequently. Earlier + -- versions cached a single entry, but then reverted to a serial search, + -- and this proved to be a significant source of inefficiency. To get + -- around this, we use the following directly indexed array. The space + -- of possible input values is a value of type Source_Ptr which is simply + -- an Int value. The values in this space are allocated sequentially as + -- new units are loaded. + + -- The following table has an entry for each 4K range of possible + -- Source_Ptr values. The value in the table is the lowest value + -- Source_File_Index whose Source_Ptr range contains value in the + -- range. + + -- For example, the entry with index 4 in this table represents Source_Ptr + -- values in the range 4*4096 .. 5*4096-1. The Source_File_Index value + -- stored would be the lowest numbered source file with at least one byte + -- in this range. + + -- The algorithm used in Get_Source_File_Index is simply to access this + -- table and then do a serial search starting at the given position. This + -- will almost always terminate with one or two checks. + + -- Note that this array is pretty large, but in most operating systems + -- it will not be allocated in physical memory unless it is actually used. + + Chunk_Power : constant := 12; + Chunk_Size : constant := 2 ** Chunk_Power; + -- Change comments above if value changed. Note that Chunk_Size must + -- be a power of 2 (to allow for efficient access to the table). + + Source_File_Index_Table : + array (Int range 0 .. Int'Last / Chunk_Size) of Source_File_Index; + + procedure Set_Source_File_Index_Table (Xnew : Source_File_Index); + -- Sets entries in the Source_File_Index_Table for the newly created + -- Source_File table entry whose index is Xnew. The Source_First and + -- Source_Last fields of this entry must be set before the call. + + ----------------------- + -- Checksum Handling -- + ----------------------- + + -- As a source file is scanned, a checksum is computed by taking all the + -- non-blank characters in the file, excluding comment characters, the + -- minus-minus sequence starting a comment, and all control characters + -- except ESC. + + -- The checksum algorithm used is the standard CRC-32 algorithm, as + -- implemented by System.CRC32, except that we do not bother with the + -- final XOR with all 1 bits. + + -- This algorithm ensures that the checksum includes all semantically + -- significant aspects of the program represented by the source file, + -- but is insensitive to layout, presence or contents of comments, wide + -- character representation method, or casing conventions outside strings. + + -- Scans.Checksum is initialized appropriately at the start of scanning + -- a file, and copied into the Source_Checksum field of the file table + -- entry when the end of file is encountered. + + ------------------------------------- + -- Handling Generic Instantiations -- + ------------------------------------- + + -- As described in Sem_Ch12, a generic instantiation involves making a + -- copy of the tree of the generic template. The source locations in + -- this tree directly reference the source of the template. However it + -- is also possible to find the location of the instantiation. + + -- This is achieved as follows. When an instantiation occurs, a new entry + -- is made in the source file table. This entry points to the same source + -- text, i.e. the file that contains the instantiation, but has a distinct + -- set of Source_Ptr index values. The separate range of Sloc values avoids + -- confusion, and means that the Sloc values can still be used to uniquely + -- identify the source file table entry. It is possible for both entries + -- to point to the same text, because of the virtual origin pointers used + -- in the source table. + + -- The Instantiation field of this source file index entry, usually set + -- to No_Source_File, instead contains the Sloc of the instantiation. In + -- the case of nested instantiations, this Sloc may itself refer to an + -- instantiation, so the complete chain can be traced. + + -- Two routines are used to build these special entries in the source + -- file table. Create_Instantiation_Source is first called to build + -- the virtual source table entry for the instantiation, and then the + -- Sloc values in the copy are adjusted using Adjust_Instantiation_Sloc. + -- See child unit Sinput.L for details on these two routines. + + ----------------- + -- Global Data -- + ----------------- + + Current_Source_File : Source_File_Index; + -- Source_File table index of source file currently being scanned + + Current_Source_Unit : Unit_Number_Type; + -- Unit number of source file currently being scanned. The special value + -- of No_Unit indicates that the configuration pragma file is currently + -- being scanned (this has no entry in the unit table). + + Source_gnat_adc : Source_File_Index := No_Source_File; + -- This is set if a gnat.adc file is present to reference this file + + Source : Source_Buffer_Ptr; + -- Current source (copy of Source_File.Table (Current_Source_Unit).Source) + + Internal_Source : aliased Source_Buffer (1 .. 81); + -- This buffer is used internally in the compiler when the lexical analyzer + -- is used to scan a string from within the compiler. The procedure is to + -- establish Internal_Source_Ptr as the value of Source, set the string to + -- be scanned, appropriately terminated, in this buffer, and set Scan_Ptr + -- to point to the start of the buffer. It is a fatal error if the scanner + -- signals an error while scanning a token in this internal buffer. + + Internal_Source_Ptr : constant Source_Buffer_Ptr := + Internal_Source'Unrestricted_Access; + -- Pointer to internal source buffer + + ----------------- + -- Subprograms -- + ----------------- + + procedure Backup_Line (P : in out Source_Ptr); + -- Back up the argument pointer to the start of the previous line. On + -- entry, P points to the start of a physical line in the source buffer. + -- On return, P is updated to point to the start of the previous line. + -- The caller has checked that a Line_Terminator character precedes P so + -- that there definitely is a previous line in the source buffer. + + procedure Build_Location_String (Loc : Source_Ptr); + -- This function builds a string literal of the form "name:line", + -- where name is the file name corresponding to Loc, and line is + -- the line number. In the event that instantiations are involved, + -- additional suffixes of the same form are appended after the + -- separating string " instantiated at ". The returned string is + -- stored in Name_Buffer, terminated by ASCII.Nul, with Name_Length + -- indicating the length not including the terminating Nul. + + function Get_Column_Number (P : Source_Ptr) return Column_Number; + -- The ones-origin column number of the specified Source_Ptr value is + -- determined and returned. Tab characters if present are assumed to + -- represent the standard 1,9,17.. spacing pattern. + + function Get_Logical_Line_Number + (P : Source_Ptr) return Logical_Line_Number; + -- The line number of the specified source position is obtained by + -- doing a binary search on the source positions in the lines table + -- for the unit containing the given source position. The returned + -- value is the logical line number, already adjusted for the effect + -- of source reference pragmas. If P refers to the line of a source + -- reference pragma itself, then No_Line is returned. If no source + -- reference pragmas have been encountered, the value returned is + -- the same as the physical line number. + + function Get_Physical_Line_Number + (P : Source_Ptr) return Physical_Line_Number; + -- The line number of the specified source position is obtained by + -- doing a binary search on the source positions in the lines table + -- for the unit containing the given source position. The returned + -- value is the physical line number in the source being compiled. + + function Get_Source_File_Index (S : Source_Ptr) return Source_File_Index; + -- Return file table index of file identified by given source pointer + -- value. This call must always succeed, since any valid source pointer + -- value belongs to some previously loaded source file. + + function Instantiation_Depth (S : Source_Ptr) return Nat; + -- Determine instantiation depth for given Sloc value. A value of + -- zero means that the given Sloc is not in an instantiation. + + function Line_Start (P : Source_Ptr) return Source_Ptr; + -- Finds the source position of the start of the line containing the + -- given source location. + + function Line_Start + (L : Physical_Line_Number; + S : Source_File_Index) return Source_Ptr; + -- Finds the source position of the start of the given line in the + -- given source file, using a physical line number to identify the line. + + function Num_Source_Lines (S : Source_File_Index) return Nat; + -- Returns the number of source lines (this is equivalent to reading + -- the value of Last_Source_Line, but returns Nat rathern than a + -- physical line number. + + procedure Register_Source_Ref_Pragma + (File_Name : File_Name_Type; + Stripped_File_Name : File_Name_Type; + Mapped_Line : Nat; + Line_After_Pragma : Physical_Line_Number); + -- Register a source reference pragma, the parameter File_Name is the + -- file name from the pragma, and Stripped_File_Name is this name with + -- the directory information stripped. Both these parameters are set + -- to No_Name if no file name parameter was given in the pragma. + -- (which can only happen for the second and subsequent pragmas). + -- Mapped_Line is the line number parameter from the pragma, and + -- Line_After_Pragma is the physical line number of the line that + -- follows the line containing the Source_Reference pragma. + + function Original_Location (S : Source_Ptr) return Source_Ptr; + -- Given a source pointer S, returns the corresponding source pointer + -- value ignoring instantiation copies. For locations that do not + -- correspond to instantiation copies of templates, the argument is + -- returned unchanged. For locations that do correspond to copies of + -- templates from instantiations, the location within the original + -- template is returned. This is useful in canonicalizing locations. + + function Instantiation_Location (S : Source_Ptr) return Source_Ptr; + pragma Inline (Instantiation_Location); + -- Given a source pointer S, returns the corresponding source pointer + -- value of the instantiation if this location is within an instance. + -- If S is not within an instance, then this returns No_Location. + + function Top_Level_Location (S : Source_Ptr) return Source_Ptr; + -- Given a source pointer S, returns the argument unchanged if it is + -- not in an instantiation. If S is in an instantiation, then it returns + -- the location of the top level instantiation, i.e. the outer level + -- instantiation in the nested case. + + function Physical_To_Logical + (Line : Physical_Line_Number; + S : Source_File_Index) return Logical_Line_Number; + -- Given a physical line number in source file whose source index is S, + -- return the corresponding logical line number. If the physical line + -- number is one containing a Source_Reference pragma, the result will + -- be No_Line_Number. + + procedure Skip_Line_Terminators + (P : in out Source_Ptr; + Physical : out Boolean); + -- On entry, P points to a line terminator that has been encountered, + -- which is one of FF,LF,VT,CR or a wide character sequence whose value is + -- in category Separator,Line or Separator,Paragraph. The purpose of this + -- P points just past the character that was scanned. The purpose of this + -- routine is to distinguish physical and logical line endings. A physical + -- line ending is one of: + -- + -- CR on its own (MAC System 7) + -- LF on its own (Unix and unix-like systems) + -- CR/LF (DOS, Windows) + -- LF/CR (not used, but recognized in any case) + -- Wide character in Separator,Line or Separator,Paragraph category + -- + -- A logical line ending (that is not a physical line ending) is one of: + -- + -- VT on its own + -- FF on its own + -- + -- On return, P is bumped past the line ending sequence (one of the above + -- seven possibilities). Physical is set to True to indicate that a + -- physical end of line was encountered, in which case this routine also + -- makes sure that the lines table for the current source file has an + -- appropriate entry for the start of the new physical line. + + function Source_Offset (S : Source_Ptr) return Nat; + -- Returns the zero-origin offset of the given source location from the + -- start of its corresponding unit. This is used for creating canonical + -- names in some situations. + + procedure Write_Location (P : Source_Ptr); + -- Writes out a string of the form fff:nn:cc, where fff, nn, cc are the + -- file name, line number and column corresponding to the given source + -- location. No_Location and Standard_Location appear as the strings + -- <no location> and <standard location>. If the location is within an + -- instantiation, then the instance location is appended, enclosed in + -- square brackets (which can nest if necessary). Note that this routine + -- is used only for internal compiler debugging output purposes (which + -- is why the somewhat cryptic use of brackets is acceptable). + + procedure wl (P : Source_Ptr); + pragma Export (Ada, wl); + -- Equivalent to Write_Location (P); Write_Eol; for calls from GDB + + procedure Write_Time_Stamp (S : Source_File_Index); + -- Writes time stamp of specified file in YY-MM-DD HH:MM.SS format + + procedure Tree_Read; + -- Initializes internal tables from current tree file using the relevant + -- Table.Tree_Read routines. + + procedure Tree_Write; + -- Writes out internal tables to current tree file using the relevant + -- Table.Tree_Write routines. + +private + pragma Inline (File_Name); + pragma Inline (First_Mapped_Line); + pragma Inline (Full_File_Name); + pragma Inline (Identifier_Casing); + pragma Inline (Instantiation); + pragma Inline (Keyword_Casing); + pragma Inline (Last_Source_Line); + pragma Inline (Last_Source_File); + pragma Inline (License); + pragma Inline (Num_SRef_Pragmas); + pragma Inline (Num_Source_Files); + pragma Inline (Num_Source_Lines); + pragma Inline (Reference_Name); + pragma Inline (Set_Keyword_Casing); + pragma Inline (Set_Identifier_Casing); + pragma Inline (Source_First); + pragma Inline (Source_Last); + pragma Inline (Source_Text); + pragma Inline (Template); + pragma Inline (Time_Stamp); + + ------------------------- + -- Source_Lines Tables -- + ------------------------- + + type Lines_Table_Type is + array (Physical_Line_Number) of Source_Ptr; + -- Type used for lines table. The entries are indexed by physical line + -- numbers. The values are the starting Source_Ptr values for the start + -- of the corresponding physical line. Note that we make this a bogus + -- big array, sized as required, so that we avoid the use of fat pointers. + + type Lines_Table_Ptr is access all Lines_Table_Type; + -- Type used for pointers to line tables + + type Logical_Lines_Table_Type is + array (Physical_Line_Number) of Logical_Line_Number; + -- Type used for logical lines table. This table is used if a source + -- reference pragma is present. It is indexed by physical line numbers, + -- and contains the corresponding logical line numbers. An entry that + -- corresponds to a source reference pragma is set to No_Line_Number. + -- Note that we make this a bogus big array, sized as required, so that + -- we avoid the use of fat pointers. + + type Logical_Lines_Table_Ptr is access all Logical_Lines_Table_Type; + -- Type used for pointers to logical line tables + + ----------------------- + -- Source_File Table -- + ----------------------- + + -- See earlier descriptions for meanings of public fields + + type Source_File_Record is record + File_Name : File_Name_Type; + Reference_Name : File_Name_Type; + Debug_Source_Name : File_Name_Type; + Full_Debug_Name : File_Name_Type; + Full_File_Name : File_Name_Type; + Full_Ref_Name : File_Name_Type; + Num_SRef_Pragmas : Nat; + First_Mapped_Line : Logical_Line_Number; + Source_Text : Source_Buffer_Ptr; + Source_First : Source_Ptr; + Source_Last : Source_Ptr; + Source_Checksum : Word; + Last_Source_Line : Physical_Line_Number; + Instantiation : Source_Ptr; + Template : Source_File_Index; + Unit : Unit_Number_Type; + Time_Stamp : Time_Stamp_Type; + File_Type : Type_Of_File; + Inlined_Body : Boolean; + License : License_Type; + Keyword_Casing : Casing_Type; + Identifier_Casing : Casing_Type; + + -- The following fields are for internal use only (i.e. only in the + -- body of Sinput or its children, with no direct access by clients). + + Sloc_Adjust : Source_Ptr; + -- A value to be added to Sloc values for this file to reference the + -- corresponding lines table. This is zero for the non-instantiation + -- case, and set so that the adition references the ultimate template + -- for the instantiation case. See Sinput-L for further details. + + Lines_Table : Lines_Table_Ptr; + -- Pointer to lines table for this source. Updated as additional + -- lines are accessed using the Skip_Line_Terminators procedure. + -- Note: the lines table for an instantiation entry refers to the + -- original line numbers of the template see Sinput-L for details. + + Logical_Lines_Table : Logical_Lines_Table_Ptr; + -- Pointer to logical lines table for this source. Non-null only if + -- a source reference pragma has been processed. Updated as lines + -- are accessed using the Skip_Line_Terminators procedure. + + Lines_Table_Max : Physical_Line_Number; + -- Maximum subscript values for currently allocated Lines_Table + -- and (if present) the allocated Logical_Lines_Table. The value + -- Max_Source_Line gives the maximum used value, this gives the + -- maximum allocated value. + + end record; + + -- The following representation clause ensures that the above record + -- has no holes. We do this so that when instances of this record are + -- written by Tree_Gen, we do not write uninitialized values to the file. + + AS : constant Pos := Standard'Address_Size; + + for Source_File_Record use record + File_Name at 0 range 0 .. 31; + Reference_Name at 4 range 0 .. 31; + Debug_Source_Name at 8 range 0 .. 31; + Full_Debug_Name at 12 range 0 .. 31; + Full_File_Name at 16 range 0 .. 31; + Full_Ref_Name at 20 range 0 .. 31; + Num_SRef_Pragmas at 24 range 0 .. 31; + First_Mapped_Line at 28 range 0 .. 31; + Source_First at 32 range 0 .. 31; + Source_Last at 36 range 0 .. 31; + Source_Checksum at 40 range 0 .. 31; + Last_Source_Line at 44 range 0 .. 31; + Instantiation at 48 range 0 .. 31; + Template at 52 range 0 .. 31; + Unit at 56 range 0 .. 31; + Time_Stamp at 60 range 0 .. 8 * Time_Stamp_Length - 1; + File_Type at 74 range 0 .. 7; + Inlined_Body at 75 range 0 .. 7; + License at 76 range 0 .. 7; + Keyword_Casing at 77 range 0 .. 7; + Identifier_Casing at 78 range 0 .. 15; + Sloc_Adjust at 80 range 0 .. 31; + Lines_Table_Max at 84 range 0 .. 31; + + -- The following fields are pointers, so we have to specialize their + -- lengths using pointer size, obtained above as Standard'Address_Size. + + Source_Text at 88 range 0 .. AS - 1; + Lines_Table at 88 range AS .. AS * 2 - 1; + Logical_Lines_Table at 88 range AS * 2 .. AS * 3 - 1; + end record; + + for Source_File_Record'Size use 88 * 8 + AS * 3; + -- This ensures that we did not leave out any fields + + package Source_File is new Table.Table ( + Table_Component_Type => Source_File_Record, + Table_Index_Type => Source_File_Index, + Table_Low_Bound => 1, + Table_Initial => Alloc.Source_File_Initial, + Table_Increment => Alloc.Source_File_Increment, + Table_Name => "Source_File"); + + ----------------- + -- Subprograms -- + ----------------- + + procedure Alloc_Line_Tables + (S : in out Source_File_Record; + New_Max : Nat); + -- Allocate or reallocate the lines table for the given source file so + -- that it can accommodate at least New_Max lines. Also allocates or + -- reallocates logical lines table if source ref pragmas are present. + + procedure Add_Line_Tables_Entry + (S : in out Source_File_Record; + P : Source_Ptr); + -- Increment line table size by one (reallocating the lines table if + -- needed) and set the new entry to contain the value P. Also bumps + -- the Source_Line_Count field. If source reference pragmas are + -- present, also increments logical lines table size by one, and + -- sets new entry. + + procedure Trim_Lines_Table (S : Source_File_Index); + -- Set lines table size for entry S in the source file table to + -- correspond to the current value of Num_Source_Lines, releasing + -- any unused storage. This is used by Sinput.L and Sinput.D. + +end Sinput; |