diff options
Diffstat (limited to 'gcc-4.2.1/gcc/ada/sem_eval.adb')
-rw-r--r-- | gcc-4.2.1/gcc/ada/sem_eval.adb | 4507 |
1 files changed, 4507 insertions, 0 deletions
diff --git a/gcc-4.2.1/gcc/ada/sem_eval.adb b/gcc-4.2.1/gcc/ada/sem_eval.adb new file mode 100644 index 000000000..65005de95 --- /dev/null +++ b/gcc-4.2.1/gcc/ada/sem_eval.adb @@ -0,0 +1,4507 @@ +------------------------------------------------------------------------------ +-- -- +-- GNAT COMPILER COMPONENTS -- +-- -- +-- S E M _ E V A L -- +-- -- +-- B o d y -- +-- -- +-- Copyright (C) 1992-2006, Free Software Foundation, Inc. -- +-- -- +-- GNAT is free software; you can redistribute it and/or modify it under -- +-- terms of the GNU General Public License as published by the Free Soft- -- +-- ware Foundation; either version 2, or (at your option) any later ver- -- +-- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- +-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- +-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- +-- for more details. You should have received a copy of the GNU General -- +-- Public License distributed with GNAT; see file COPYING. If not, write -- +-- to the Free Software Foundation, 51 Franklin Street, Fifth Floor, -- +-- Boston, MA 02110-1301, USA. -- +-- -- +-- GNAT was originally developed by the GNAT team at New York University. -- +-- Extensive contributions were provided by Ada Core Technologies Inc. -- +-- -- +------------------------------------------------------------------------------ + +with Atree; use Atree; +with Checks; use Checks; +with Debug; use Debug; +with Einfo; use Einfo; +with Elists; use Elists; +with Errout; use Errout; +with Eval_Fat; use Eval_Fat; +with Exp_Util; use Exp_Util; +with Lib; use Lib; +with Nmake; use Nmake; +with Nlists; use Nlists; +with Opt; use Opt; +with Sem; use Sem; +with Sem_Cat; use Sem_Cat; +with Sem_Ch6; use Sem_Ch6; +with Sem_Ch8; use Sem_Ch8; +with Sem_Res; use Sem_Res; +with Sem_Util; use Sem_Util; +with Sem_Type; use Sem_Type; +with Sem_Warn; use Sem_Warn; +with Sinfo; use Sinfo; +with Snames; use Snames; +with Stand; use Stand; +with Stringt; use Stringt; +with Tbuild; use Tbuild; + +package body Sem_Eval is + + ----------------------------------------- + -- Handling of Compile Time Evaluation -- + ----------------------------------------- + + -- The compile time evaluation of expressions is distributed over several + -- Eval_xxx procedures. These procedures are called immediatedly after + -- a subexpression is resolved and is therefore accomplished in a bottom + -- up fashion. The flags are synthesized using the following approach. + + -- Is_Static_Expression is determined by following the detailed rules + -- in RM 4.9(4-14). This involves testing the Is_Static_Expression + -- flag of the operands in many cases. + + -- Raises_Constraint_Error is set if any of the operands have the flag + -- set or if an attempt to compute the value of the current expression + -- results in detection of a runtime constraint error. + + -- As described in the spec, the requirement is that Is_Static_Expression + -- be accurately set, and in addition for nodes for which this flag is set, + -- Raises_Constraint_Error must also be set. Furthermore a node which has + -- Is_Static_Expression set, and Raises_Constraint_Error clear, then the + -- requirement is that the expression value must be precomputed, and the + -- node is either a literal, or the name of a constant entity whose value + -- is a static expression. + + -- The general approach is as follows. First compute Is_Static_Expression. + -- If the node is not static, then the flag is left off in the node and + -- we are all done. Otherwise for a static node, we test if any of the + -- operands will raise constraint error, and if so, propagate the flag + -- Raises_Constraint_Error to the result node and we are done (since the + -- error was already posted at a lower level). + + -- For the case of a static node whose operands do not raise constraint + -- error, we attempt to evaluate the node. If this evaluation succeeds, + -- then the node is replaced by the result of this computation. If the + -- evaluation raises constraint error, then we rewrite the node with + -- Apply_Compile_Time_Constraint_Error to raise the exception and also + -- to post appropriate error messages. + + ---------------- + -- Local Data -- + ---------------- + + type Bits is array (Nat range <>) of Boolean; + -- Used to convert unsigned (modular) values for folding logical ops + + -- The following definitions are used to maintain a cache of nodes that + -- have compile time known values. The cache is maintained only for + -- discrete types (the most common case), and is populated by calls to + -- Compile_Time_Known_Value and Expr_Value, but only used by Expr_Value + -- since it is possible for the status to change (in particular it is + -- possible for a node to get replaced by a constraint error node). + + CV_Bits : constant := 5; + -- Number of low order bits of Node_Id value used to reference entries + -- in the cache table. + + CV_Cache_Size : constant Nat := 2 ** CV_Bits; + -- Size of cache for compile time values + + subtype CV_Range is Nat range 0 .. CV_Cache_Size; + + type CV_Entry is record + N : Node_Id; + V : Uint; + end record; + + type CV_Cache_Array is array (CV_Range) of CV_Entry; + + CV_Cache : CV_Cache_Array := (others => (Node_High_Bound, Uint_0)); + -- This is the actual cache, with entries consisting of node/value pairs, + -- and the impossible value Node_High_Bound used for unset entries. + + ----------------------- + -- Local Subprograms -- + ----------------------- + + function From_Bits (B : Bits; T : Entity_Id) return Uint; + -- Converts a bit string of length B'Length to a Uint value to be used + -- for a target of type T, which is a modular type. This procedure + -- includes the necessary reduction by the modulus in the case of a + -- non-binary modulus (for a binary modulus, the bit string is the + -- right length any way so all is well). + + function Get_String_Val (N : Node_Id) return Node_Id; + -- Given a tree node for a folded string or character value, returns + -- the corresponding string literal or character literal (one of the + -- two must be available, or the operand would not have been marked + -- as foldable in the earlier analysis of the operation). + + function OK_Bits (N : Node_Id; Bits : Uint) return Boolean; + -- Bits represents the number of bits in an integer value to be computed + -- (but the value has not been computed yet). If this value in Bits is + -- reasonable, a result of True is returned, with the implication that + -- the caller should go ahead and complete the calculation. If the value + -- in Bits is unreasonably large, then an error is posted on node N, and + -- False is returned (and the caller skips the proposed calculation). + + procedure Out_Of_Range (N : Node_Id); + -- This procedure is called if it is determined that node N, which + -- appears in a non-static context, is a compile time known value + -- which is outside its range, i.e. the range of Etype. This is used + -- in contexts where this is an illegality if N is static, and should + -- generate a warning otherwise. + + procedure Rewrite_In_Raise_CE (N : Node_Id; Exp : Node_Id); + -- N and Exp are nodes representing an expression, Exp is known + -- to raise CE. N is rewritten in term of Exp in the optimal way. + + function String_Type_Len (Stype : Entity_Id) return Uint; + -- Given a string type, determines the length of the index type, or, + -- if this index type is non-static, the length of the base type of + -- this index type. Note that if the string type is itself static, + -- then the index type is static, so the second case applies only + -- if the string type passed is non-static. + + function Test (Cond : Boolean) return Uint; + pragma Inline (Test); + -- This function simply returns the appropriate Boolean'Pos value + -- corresponding to the value of Cond as a universal integer. It is + -- used for producing the result of the static evaluation of the + -- logical operators + + procedure Test_Expression_Is_Foldable + (N : Node_Id; + Op1 : Node_Id; + Stat : out Boolean; + Fold : out Boolean); + -- Tests to see if expression N whose single operand is Op1 is foldable, + -- i.e. the operand value is known at compile time. If the operation is + -- foldable, then Fold is True on return, and Stat indicates whether + -- the result is static (i.e. both operands were static). Note that it + -- is quite possible for Fold to be True, and Stat to be False, since + -- there are cases in which we know the value of an operand even though + -- it is not technically static (e.g. the static lower bound of a range + -- whose upper bound is non-static). + -- + -- If Stat is set False on return, then Expression_Is_Foldable makes a + -- call to Check_Non_Static_Context on the operand. If Fold is False on + -- return, then all processing is complete, and the caller should + -- return, since there is nothing else to do. + + procedure Test_Expression_Is_Foldable + (N : Node_Id; + Op1 : Node_Id; + Op2 : Node_Id; + Stat : out Boolean; + Fold : out Boolean); + -- Same processing, except applies to an expression N with two operands + -- Op1 and Op2. + + procedure To_Bits (U : Uint; B : out Bits); + -- Converts a Uint value to a bit string of length B'Length + + ------------------------------ + -- Check_Non_Static_Context -- + ------------------------------ + + procedure Check_Non_Static_Context (N : Node_Id) is + T : constant Entity_Id := Etype (N); + Checks_On : constant Boolean := + not Index_Checks_Suppressed (T) + and not Range_Checks_Suppressed (T); + + begin + -- Ignore cases of non-scalar types or error types + + if T = Any_Type or else not Is_Scalar_Type (T) then + return; + end if; + + -- At this stage we have a scalar type. If we have an expression + -- that raises CE, then we already issued a warning or error msg + -- so there is nothing more to be done in this routine. + + if Raises_Constraint_Error (N) then + return; + end if; + + -- Now we have a scalar type which is not marked as raising a + -- constraint error exception. The main purpose of this routine + -- is to deal with static expressions appearing in a non-static + -- context. That means that if we do not have a static expression + -- then there is not much to do. The one case that we deal with + -- here is that if we have a floating-point value that is out of + -- range, then we post a warning that an infinity will result. + + if not Is_Static_Expression (N) then + if Is_Floating_Point_Type (T) + and then Is_Out_Of_Range (N, Base_Type (T)) + then + Error_Msg_N + ("?float value out of range, infinity will be generated", N); + end if; + + return; + end if; + + -- Here we have the case of outer level static expression of + -- scalar type, where the processing of this procedure is needed. + + -- For real types, this is where we convert the value to a machine + -- number (see RM 4.9(38)). Also see ACVC test C490001. We should + -- only need to do this if the parent is a constant declaration, + -- since in other cases, gigi should do the necessary conversion + -- correctly, but experimentation shows that this is not the case + -- on all machines, in particular if we do not convert all literals + -- to machine values in non-static contexts, then ACVC test C490001 + -- fails on Sparc/Solaris and SGI/Irix. + + if Nkind (N) = N_Real_Literal + and then not Is_Machine_Number (N) + and then not Is_Generic_Type (Etype (N)) + and then Etype (N) /= Universal_Real + then + -- Check that value is in bounds before converting to machine + -- number, so as not to lose case where value overflows in the + -- least significant bit or less. See B490001. + + if Is_Out_Of_Range (N, Base_Type (T)) then + Out_Of_Range (N); + return; + end if; + + -- Note: we have to copy the node, to avoid problems with conformance + -- of very similar numbers (see ACVC tests B4A010C and B63103A). + + Rewrite (N, New_Copy (N)); + + if not Is_Floating_Point_Type (T) then + Set_Realval + (N, Corresponding_Integer_Value (N) * Small_Value (T)); + + elsif not UR_Is_Zero (Realval (N)) then + + -- Note: even though RM 4.9(38) specifies biased rounding, + -- this has been modified by AI-100 in order to prevent + -- confusing differences in rounding between static and + -- non-static expressions. AI-100 specifies that the effect + -- of such rounding is implementation dependent, and in GNAT + -- we round to nearest even to match the run-time behavior. + + Set_Realval + (N, Machine (Base_Type (T), Realval (N), Round_Even, N)); + end if; + + Set_Is_Machine_Number (N); + end if; + + -- Check for out of range universal integer. This is a non-static + -- context, so the integer value must be in range of the runtime + -- representation of universal integers. + + -- We do this only within an expression, because that is the only + -- case in which non-static universal integer values can occur, and + -- furthermore, Check_Non_Static_Context is currently (incorrectly???) + -- called in contexts like the expression of a number declaration where + -- we certainly want to allow out of range values. + + if Etype (N) = Universal_Integer + and then Nkind (N) = N_Integer_Literal + and then Nkind (Parent (N)) in N_Subexpr + and then + (Intval (N) < Expr_Value (Type_Low_Bound (Universal_Integer)) + or else + Intval (N) > Expr_Value (Type_High_Bound (Universal_Integer))) + then + Apply_Compile_Time_Constraint_Error + (N, "non-static universal integer value out of range?", + CE_Range_Check_Failed); + + -- Check out of range of base type + + elsif Is_Out_Of_Range (N, Base_Type (T)) then + Out_Of_Range (N); + + -- Give warning if outside subtype (where one or both of the + -- bounds of the subtype is static). This warning is omitted + -- if the expression appears in a range that could be null + -- (warnings are handled elsewhere for this case). + + elsif T /= Base_Type (T) + and then Nkind (Parent (N)) /= N_Range + then + if Is_In_Range (N, T) then + null; + + elsif Is_Out_Of_Range (N, T) then + Apply_Compile_Time_Constraint_Error + (N, "value not in range of}?", CE_Range_Check_Failed); + + elsif Checks_On then + Enable_Range_Check (N); + + else + Set_Do_Range_Check (N, False); + end if; + end if; + end Check_Non_Static_Context; + + --------------------------------- + -- Check_String_Literal_Length -- + --------------------------------- + + procedure Check_String_Literal_Length (N : Node_Id; Ttype : Entity_Id) is + begin + if not Raises_Constraint_Error (N) + and then Is_Constrained (Ttype) + then + if + UI_From_Int (String_Length (Strval (N))) /= String_Type_Len (Ttype) + then + Apply_Compile_Time_Constraint_Error + (N, "string length wrong for}?", + CE_Length_Check_Failed, + Ent => Ttype, + Typ => Ttype); + end if; + end if; + end Check_String_Literal_Length; + + -------------------------- + -- Compile_Time_Compare -- + -------------------------- + + function Compile_Time_Compare + (L, R : Node_Id; + Rec : Boolean := False) return Compare_Result + is + Ltyp : constant Entity_Id := Etype (L); + Rtyp : constant Entity_Id := Etype (R); + + procedure Compare_Decompose + (N : Node_Id; + R : out Node_Id; + V : out Uint); + -- This procedure decomposes the node N into an expression node + -- and a signed offset, so that the value of N is equal to the + -- value of R plus the value V (which may be negative). If no + -- such decomposition is possible, then on return R is a copy + -- of N, and V is set to zero. + + function Compare_Fixup (N : Node_Id) return Node_Id; + -- This function deals with replacing 'Last and 'First references + -- with their corresponding type bounds, which we then can compare. + -- The argument is the original node, the result is the identity, + -- unless we have a 'Last/'First reference in which case the value + -- returned is the appropriate type bound. + + function Is_Same_Value (L, R : Node_Id) return Boolean; + -- Returns True iff L and R represent expressions that definitely + -- have identical (but not necessarily compile time known) values + -- Indeed the caller is expected to have already dealt with the + -- cases of compile time known values, so these are not tested here. + + ----------------------- + -- Compare_Decompose -- + ----------------------- + + procedure Compare_Decompose + (N : Node_Id; + R : out Node_Id; + V : out Uint) + is + begin + if Nkind (N) = N_Op_Add + and then Nkind (Right_Opnd (N)) = N_Integer_Literal + then + R := Left_Opnd (N); + V := Intval (Right_Opnd (N)); + return; + + elsif Nkind (N) = N_Op_Subtract + and then Nkind (Right_Opnd (N)) = N_Integer_Literal + then + R := Left_Opnd (N); + V := UI_Negate (Intval (Right_Opnd (N))); + return; + + elsif Nkind (N) = N_Attribute_Reference then + + if Attribute_Name (N) = Name_Succ then + R := First (Expressions (N)); + V := Uint_1; + return; + + elsif Attribute_Name (N) = Name_Pred then + R := First (Expressions (N)); + V := Uint_Minus_1; + return; + end if; + end if; + + R := N; + V := Uint_0; + end Compare_Decompose; + + ------------------- + -- Compare_Fixup -- + ------------------- + + function Compare_Fixup (N : Node_Id) return Node_Id is + Indx : Node_Id; + Xtyp : Entity_Id; + Subs : Nat; + + begin + if Nkind (N) = N_Attribute_Reference + and then (Attribute_Name (N) = Name_First + or else + Attribute_Name (N) = Name_Last) + then + Xtyp := Etype (Prefix (N)); + + -- If we have no type, then just abandon the attempt to do + -- a fixup, this is probably the result of some other error. + + if No (Xtyp) then + return N; + end if; + + -- Dereference an access type + + if Is_Access_Type (Xtyp) then + Xtyp := Designated_Type (Xtyp); + end if; + + -- If we don't have an array type at this stage, something + -- is peculiar, e.g. another error, and we abandon the attempt + -- at a fixup. + + if not Is_Array_Type (Xtyp) then + return N; + end if; + + -- Ignore unconstrained array, since bounds are not meaningful + + if not Is_Constrained (Xtyp) then + return N; + end if; + + if Ekind (Xtyp) = E_String_Literal_Subtype then + if Attribute_Name (N) = Name_First then + return String_Literal_Low_Bound (Xtyp); + + else -- Attribute_Name (N) = Name_Last + return Make_Integer_Literal (Sloc (N), + Intval => Intval (String_Literal_Low_Bound (Xtyp)) + + String_Literal_Length (Xtyp)); + end if; + end if; + + -- Find correct index type + + Indx := First_Index (Xtyp); + + if Present (Expressions (N)) then + Subs := UI_To_Int (Expr_Value (First (Expressions (N)))); + + for J in 2 .. Subs loop + Indx := Next_Index (Indx); + end loop; + end if; + + Xtyp := Etype (Indx); + + if Attribute_Name (N) = Name_First then + return Type_Low_Bound (Xtyp); + + else -- Attribute_Name (N) = Name_Last + return Type_High_Bound (Xtyp); + end if; + end if; + + return N; + end Compare_Fixup; + + ------------------- + -- Is_Same_Value -- + ------------------- + + function Is_Same_Value (L, R : Node_Id) return Boolean is + Lf : constant Node_Id := Compare_Fixup (L); + Rf : constant Node_Id := Compare_Fixup (R); + + function Is_Same_Subscript (L, R : List_Id) return Boolean; + -- L, R are the Expressions values from two attribute nodes + -- for First or Last attributes. Either may be set to No_List + -- if no expressions are present (indicating subscript 1). + -- The result is True if both expressions represent the same + -- subscript (note that one case is where one subscript is + -- missing and the other is explicitly set to 1). + + ----------------------- + -- Is_Same_Subscript -- + ----------------------- + + function Is_Same_Subscript (L, R : List_Id) return Boolean is + begin + if L = No_List then + if R = No_List then + return True; + else + return Expr_Value (First (R)) = Uint_1; + end if; + + else + if R = No_List then + return Expr_Value (First (L)) = Uint_1; + else + return Expr_Value (First (L)) = Expr_Value (First (R)); + end if; + end if; + end Is_Same_Subscript; + + -- Start of processing for Is_Same_Value + + begin + -- Values are the same if they are the same identifier and the + -- identifier refers to a constant object (E_Constant). This + -- does not however apply to Float types, since we may have two + -- NaN values and they should never compare equal. + + if Nkind (Lf) = N_Identifier and then Nkind (Rf) = N_Identifier + and then Entity (Lf) = Entity (Rf) + and then not Is_Floating_Point_Type (Etype (L)) + and then (Ekind (Entity (Lf)) = E_Constant or else + Ekind (Entity (Lf)) = E_In_Parameter or else + Ekind (Entity (Lf)) = E_Loop_Parameter) + then + return True; + + -- Or if they are compile time known and identical + + elsif Compile_Time_Known_Value (Lf) + and then + Compile_Time_Known_Value (Rf) + and then Expr_Value (Lf) = Expr_Value (Rf) + then + return True; + + -- Or if they are both 'First or 'Last values applying to the + -- same entity (first and last don't change even if value does) + + elsif Nkind (Lf) = N_Attribute_Reference + and then + Nkind (Rf) = N_Attribute_Reference + and then Attribute_Name (Lf) = Attribute_Name (Rf) + and then (Attribute_Name (Lf) = Name_First + or else + Attribute_Name (Lf) = Name_Last) + and then Is_Entity_Name (Prefix (Lf)) + and then Is_Entity_Name (Prefix (Rf)) + and then Entity (Prefix (Lf)) = Entity (Prefix (Rf)) + and then Is_Same_Subscript (Expressions (Lf), Expressions (Rf)) + then + return True; + + -- All other cases, we can't tell + + else + return False; + end if; + end Is_Same_Value; + + -- Start of processing for Compile_Time_Compare + + begin + -- If either operand could raise constraint error, then we cannot + -- know the result at compile time (since CE may be raised!) + + if not (Cannot_Raise_Constraint_Error (L) + and then + Cannot_Raise_Constraint_Error (R)) + then + return Unknown; + end if; + + -- Identical operands are most certainly equal + + if L = R then + return EQ; + + -- If expressions have no types, then do not attempt to determine + -- if they are the same, since something funny is going on. One + -- case in which this happens is during generic template analysis, + -- when bounds are not fully analyzed. + + elsif No (Ltyp) or else No (Rtyp) then + return Unknown; + + -- We only attempt compile time analysis for scalar values, and + -- not for packed arrays represented as modular types, where the + -- semantics of comparison is quite different. + + elsif not Is_Scalar_Type (Ltyp) + or else Is_Packed_Array_Type (Ltyp) + then + return Unknown; + + -- Case where comparison involves two compile time known values + + elsif Compile_Time_Known_Value (L) + and then Compile_Time_Known_Value (R) + then + -- For the floating-point case, we have to be a little careful, since + -- at compile time we are dealing with universal exact values, but at + -- runtime, these will be in non-exact target form. That's why the + -- returned results are LE and GE below instead of LT and GT. + + if Is_Floating_Point_Type (Ltyp) + or else + Is_Floating_Point_Type (Rtyp) + then + declare + Lo : constant Ureal := Expr_Value_R (L); + Hi : constant Ureal := Expr_Value_R (R); + + begin + if Lo < Hi then + return LE; + elsif Lo = Hi then + return EQ; + else + return GE; + end if; + end; + + -- For the integer case we know exactly (note that this includes the + -- fixed-point case, where we know the run time integer values now) + + else + declare + Lo : constant Uint := Expr_Value (L); + Hi : constant Uint := Expr_Value (R); + + begin + if Lo < Hi then + return LT; + elsif Lo = Hi then + return EQ; + else + return GT; + end if; + end; + end if; + + -- Cases where at least one operand is not known at compile time + + else + -- Here is where we check for comparisons against maximum bounds of + -- types, where we know that no value can be outside the bounds of + -- the subtype. Note that this routine is allowed to assume that all + -- expressions are within their subtype bounds. Callers wishing to + -- deal with possibly invalid values must in any case take special + -- steps (e.g. conversions to larger types) to avoid this kind of + -- optimization, which is always considered to be valid. We do not + -- attempt this optimization with generic types, since the type + -- bounds may not be meaningful in this case. + + -- We are in danger of an infinite recursion here. It does not seem + -- useful to go more than one level deep, so the parameter Rec is + -- used to protect ourselves against this infinite recursion. + + if not Rec + and then Is_Discrete_Type (Ltyp) + and then Is_Discrete_Type (Rtyp) + and then not Is_Generic_Type (Ltyp) + and then not Is_Generic_Type (Rtyp) + then + -- See if we can get a decisive check against one operand and + -- a bound of the other operand (four possible tests here). + + case Compile_Time_Compare (L, Type_Low_Bound (Rtyp), True) is + when LT => return LT; + when LE => return LE; + when EQ => return LE; + when others => null; + end case; + + case Compile_Time_Compare (L, Type_High_Bound (Rtyp), True) is + when GT => return GT; + when GE => return GE; + when EQ => return GE; + when others => null; + end case; + + case Compile_Time_Compare (Type_Low_Bound (Ltyp), R, True) is + when GT => return GT; + when GE => return GE; + when EQ => return GE; + when others => null; + end case; + + case Compile_Time_Compare (Type_High_Bound (Ltyp), R, True) is + when LT => return LT; + when LE => return LE; + when EQ => return LE; + when others => null; + end case; + end if; + + -- Next attempt is to decompose the expressions to extract + -- a constant offset resulting from the use of any of the forms: + + -- expr + literal + -- expr - literal + -- typ'Succ (expr) + -- typ'Pred (expr) + + -- Then we see if the two expressions are the same value, and if so + -- the result is obtained by comparing the offsets. + + declare + Lnode : Node_Id; + Loffs : Uint; + Rnode : Node_Id; + Roffs : Uint; + + begin + Compare_Decompose (L, Lnode, Loffs); + Compare_Decompose (R, Rnode, Roffs); + + if Is_Same_Value (Lnode, Rnode) then + if Loffs = Roffs then + return EQ; + + elsif Loffs < Roffs then + return LT; + + else + return GT; + end if; + + -- If the expressions are different, we cannot say at compile + -- time how they compare, so we return the Unknown indication. + + else + return Unknown; + end if; + end; + end if; + end Compile_Time_Compare; + + ------------------------------- + -- Compile_Time_Known_Bounds -- + ------------------------------- + + function Compile_Time_Known_Bounds (T : Entity_Id) return Boolean is + Indx : Node_Id; + Typ : Entity_Id; + + begin + if not Is_Array_Type (T) then + return False; + end if; + + Indx := First_Index (T); + while Present (Indx) loop + Typ := Underlying_Type (Etype (Indx)); + if not Compile_Time_Known_Value (Type_Low_Bound (Typ)) then + return False; + elsif not Compile_Time_Known_Value (Type_High_Bound (Typ)) then + return False; + else + Next_Index (Indx); + end if; + end loop; + + return True; + end Compile_Time_Known_Bounds; + + ------------------------------ + -- Compile_Time_Known_Value -- + ------------------------------ + + function Compile_Time_Known_Value (Op : Node_Id) return Boolean is + K : constant Node_Kind := Nkind (Op); + CV_Ent : CV_Entry renames CV_Cache (Nat (Op) mod CV_Cache_Size); + + begin + -- Never known at compile time if bad type or raises constraint error + -- or empty (latter case occurs only as a result of a previous error) + + if No (Op) + or else Op = Error + or else Etype (Op) = Any_Type + or else Raises_Constraint_Error (Op) + then + return False; + end if; + + -- If this is not a static expression and we are in configurable run + -- time mode, then we consider it not known at compile time. This + -- avoids anomalies where whether something is permitted with a given + -- configurable run-time library depends on how good the compiler is + -- at optimizing and knowing that things are constant when they + -- are non-static. + + if Configurable_Run_Time_Mode and then not Is_Static_Expression (Op) then + return False; + end if; + + -- If we have an entity name, then see if it is the name of a constant + -- and if so, test the corresponding constant value, or the name of + -- an enumeration literal, which is always a constant. + + if Present (Etype (Op)) and then Is_Entity_Name (Op) then + declare + E : constant Entity_Id := Entity (Op); + V : Node_Id; + + begin + -- Never known at compile time if it is a packed array value. + -- We might want to try to evaluate these at compile time one + -- day, but we do not make that attempt now. + + if Is_Packed_Array_Type (Etype (Op)) then + return False; + end if; + + if Ekind (E) = E_Enumeration_Literal then + return True; + + elsif Ekind (E) = E_Constant then + V := Constant_Value (E); + return Present (V) and then Compile_Time_Known_Value (V); + end if; + end; + + -- We have a value, see if it is compile time known + + else + -- Integer literals are worth storing in the cache + + if K = N_Integer_Literal then + CV_Ent.N := Op; + CV_Ent.V := Intval (Op); + return True; + + -- Other literals and NULL are known at compile time + + elsif + K = N_Character_Literal + or else + K = N_Real_Literal + or else + K = N_String_Literal + or else + K = N_Null + then + return True; + + -- Any reference to Null_Parameter is known at compile time. No + -- other attribute references (that have not already been folded) + -- are known at compile time. + + elsif K = N_Attribute_Reference then + return Attribute_Name (Op) = Name_Null_Parameter; + end if; + end if; + + -- If we fall through, not known at compile time + + return False; + + -- If we get an exception while trying to do this test, then some error + -- has occurred, and we simply say that the value is not known after all + + exception + when others => + return False; + end Compile_Time_Known_Value; + + -------------------------------------- + -- Compile_Time_Known_Value_Or_Aggr -- + -------------------------------------- + + function Compile_Time_Known_Value_Or_Aggr (Op : Node_Id) return Boolean is + begin + -- If we have an entity name, then see if it is the name of a constant + -- and if so, test the corresponding constant value, or the name of + -- an enumeration literal, which is always a constant. + + if Is_Entity_Name (Op) then + declare + E : constant Entity_Id := Entity (Op); + V : Node_Id; + + begin + if Ekind (E) = E_Enumeration_Literal then + return True; + + elsif Ekind (E) /= E_Constant then + return False; + + else + V := Constant_Value (E); + return Present (V) + and then Compile_Time_Known_Value_Or_Aggr (V); + end if; + end; + + -- We have a value, see if it is compile time known + + else + if Compile_Time_Known_Value (Op) then + return True; + + elsif Nkind (Op) = N_Aggregate then + + if Present (Expressions (Op)) then + declare + Expr : Node_Id; + + begin + Expr := First (Expressions (Op)); + while Present (Expr) loop + if not Compile_Time_Known_Value_Or_Aggr (Expr) then + return False; + end if; + + Next (Expr); + end loop; + end; + end if; + + if Present (Component_Associations (Op)) then + declare + Cass : Node_Id; + + begin + Cass := First (Component_Associations (Op)); + while Present (Cass) loop + if not + Compile_Time_Known_Value_Or_Aggr (Expression (Cass)) + then + return False; + end if; + + Next (Cass); + end loop; + end; + end if; + + return True; + + -- All other types of values are not known at compile time + + else + return False; + end if; + + end if; + end Compile_Time_Known_Value_Or_Aggr; + + ----------------- + -- Eval_Actual -- + ----------------- + + -- This is only called for actuals of functions that are not predefined + -- operators (which have already been rewritten as operators at this + -- stage), so the call can never be folded, and all that needs doing for + -- the actual is to do the check for a non-static context. + + procedure Eval_Actual (N : Node_Id) is + begin + Check_Non_Static_Context (N); + end Eval_Actual; + + -------------------- + -- Eval_Allocator -- + -------------------- + + -- Allocators are never static, so all we have to do is to do the + -- check for a non-static context if an expression is present. + + procedure Eval_Allocator (N : Node_Id) is + Expr : constant Node_Id := Expression (N); + + begin + if Nkind (Expr) = N_Qualified_Expression then + Check_Non_Static_Context (Expression (Expr)); + end if; + end Eval_Allocator; + + ------------------------ + -- Eval_Arithmetic_Op -- + ------------------------ + + -- Arithmetic operations are static functions, so the result is static + -- if both operands are static (RM 4.9(7), 4.9(20)). + + procedure Eval_Arithmetic_Op (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Ltype : constant Entity_Id := Etype (Left); + Rtype : constant Entity_Id := Etype (Right); + Stat : Boolean; + Fold : Boolean; + + begin + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Fold for cases where both operands are of integer type + + if Is_Integer_Type (Ltype) and then Is_Integer_Type (Rtype) then + declare + Left_Int : constant Uint := Expr_Value (Left); + Right_Int : constant Uint := Expr_Value (Right); + Result : Uint; + + begin + case Nkind (N) is + + when N_Op_Add => + Result := Left_Int + Right_Int; + + when N_Op_Subtract => + Result := Left_Int - Right_Int; + + when N_Op_Multiply => + if OK_Bits + (N, UI_From_Int + (Num_Bits (Left_Int) + Num_Bits (Right_Int))) + then + Result := Left_Int * Right_Int; + else + Result := Left_Int; + end if; + + when N_Op_Divide => + + -- The exception Constraint_Error is raised by integer + -- division, rem and mod if the right operand is zero. + + if Right_Int = 0 then + Apply_Compile_Time_Constraint_Error + (N, "division by zero", + CE_Divide_By_Zero, + Warn => not Stat); + return; + + else + Result := Left_Int / Right_Int; + end if; + + when N_Op_Mod => + + -- The exception Constraint_Error is raised by integer + -- division, rem and mod if the right operand is zero. + + if Right_Int = 0 then + Apply_Compile_Time_Constraint_Error + (N, "mod with zero divisor", + CE_Divide_By_Zero, + Warn => not Stat); + return; + else + Result := Left_Int mod Right_Int; + end if; + + when N_Op_Rem => + + -- The exception Constraint_Error is raised by integer + -- division, rem and mod if the right operand is zero. + + if Right_Int = 0 then + Apply_Compile_Time_Constraint_Error + (N, "rem with zero divisor", + CE_Divide_By_Zero, + Warn => not Stat); + return; + + else + Result := Left_Int rem Right_Int; + end if; + + when others => + raise Program_Error; + end case; + + -- Adjust the result by the modulus if the type is a modular type + + if Is_Modular_Integer_Type (Ltype) then + Result := Result mod Modulus (Ltype); + + -- For a signed integer type, check non-static overflow + + elsif (not Stat) and then Is_Signed_Integer_Type (Ltype) then + declare + BT : constant Entity_Id := Base_Type (Ltype); + Lo : constant Uint := Expr_Value (Type_Low_Bound (BT)); + Hi : constant Uint := Expr_Value (Type_High_Bound (BT)); + begin + if Result < Lo or else Result > Hi then + Apply_Compile_Time_Constraint_Error + (N, "value not in range of }?", + CE_Overflow_Check_Failed, + Ent => BT); + return; + end if; + end; + end if; + + -- If we get here we can fold the result + + Fold_Uint (N, Result, Stat); + end; + + -- Cases where at least one operand is a real. We handle the cases + -- of both reals, or mixed/real integer cases (the latter happen + -- only for divide and multiply, and the result is always real). + + elsif Is_Real_Type (Ltype) or else Is_Real_Type (Rtype) then + declare + Left_Real : Ureal; + Right_Real : Ureal; + Result : Ureal; + + begin + if Is_Real_Type (Ltype) then + Left_Real := Expr_Value_R (Left); + else + Left_Real := UR_From_Uint (Expr_Value (Left)); + end if; + + if Is_Real_Type (Rtype) then + Right_Real := Expr_Value_R (Right); + else + Right_Real := UR_From_Uint (Expr_Value (Right)); + end if; + + if Nkind (N) = N_Op_Add then + Result := Left_Real + Right_Real; + + elsif Nkind (N) = N_Op_Subtract then + Result := Left_Real - Right_Real; + + elsif Nkind (N) = N_Op_Multiply then + Result := Left_Real * Right_Real; + + else pragma Assert (Nkind (N) = N_Op_Divide); + if UR_Is_Zero (Right_Real) then + Apply_Compile_Time_Constraint_Error + (N, "division by zero", CE_Divide_By_Zero); + return; + end if; + + Result := Left_Real / Right_Real; + end if; + + Fold_Ureal (N, Result, Stat); + end; + end if; + end Eval_Arithmetic_Op; + + ---------------------------- + -- Eval_Character_Literal -- + ---------------------------- + + -- Nothing to be done! + + procedure Eval_Character_Literal (N : Node_Id) is + pragma Warnings (Off, N); + begin + null; + end Eval_Character_Literal; + + --------------- + -- Eval_Call -- + --------------- + + -- Static function calls are either calls to predefined operators + -- with static arguments, or calls to functions that rename a literal. + -- Only the latter case is handled here, predefined operators are + -- constant-folded elsewhere. + -- If the function is itself inherited (see 7423-001) the literal of + -- the parent type must be explicitly converted to the return type + -- of the function. + + procedure Eval_Call (N : Node_Id) is + Loc : constant Source_Ptr := Sloc (N); + Typ : constant Entity_Id := Etype (N); + Lit : Entity_Id; + + begin + if Nkind (N) = N_Function_Call + and then No (Parameter_Associations (N)) + and then Is_Entity_Name (Name (N)) + and then Present (Alias (Entity (Name (N)))) + and then Is_Enumeration_Type (Base_Type (Typ)) + then + Lit := Alias (Entity (Name (N))); + + while Present (Alias (Lit)) loop + Lit := Alias (Lit); + end loop; + + if Ekind (Lit) = E_Enumeration_Literal then + if Base_Type (Etype (Lit)) /= Base_Type (Typ) then + Rewrite + (N, Convert_To (Typ, New_Occurrence_Of (Lit, Loc))); + else + Rewrite (N, New_Occurrence_Of (Lit, Loc)); + end if; + + Resolve (N, Typ); + end if; + end if; + end Eval_Call; + + ------------------------ + -- Eval_Concatenation -- + ------------------------ + + -- Concatenation is a static function, so the result is static if + -- both operands are static (RM 4.9(7), 4.9(21)). + + procedure Eval_Concatenation (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + C_Typ : constant Entity_Id := Root_Type (Component_Type (Etype (N))); + Stat : Boolean; + Fold : Boolean; + + begin + -- Concatenation is never static in Ada 83, so if Ada 83 + -- check operand non-static context + + if Ada_Version = Ada_83 + and then Comes_From_Source (N) + then + Check_Non_Static_Context (Left); + Check_Non_Static_Context (Right); + return; + end if; + + -- If not foldable we are done. In principle concatenation that yields + -- any string type is static (i.e. an array type of character types). + -- However, character types can include enumeration literals, and + -- concatenation in that case cannot be described by a literal, so we + -- only consider the operation static if the result is an array of + -- (a descendant of) a predefined character type. + + Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); + + if (C_Typ = Standard_Character + or else C_Typ = Standard_Wide_Character + or else C_Typ = Standard_Wide_Wide_Character) + and then Fold + then + null; + else + Set_Is_Static_Expression (N, False); + return; + end if; + + -- Compile time string concatenation + + -- ??? Note that operands that are aggregates can be marked as + -- static, so we should attempt at a later stage to fold + -- concatenations with such aggregates. + + declare + Left_Str : constant Node_Id := Get_String_Val (Left); + Left_Len : Nat; + Right_Str : constant Node_Id := Get_String_Val (Right); + + begin + -- Establish new string literal, and store left operand. We make + -- sure to use the special Start_String that takes an operand if + -- the left operand is a string literal. Since this is optimized + -- in the case where that is the most recently created string + -- literal, we ensure efficient time/space behavior for the + -- case of a concatenation of a series of string literals. + + if Nkind (Left_Str) = N_String_Literal then + Left_Len := String_Length (Strval (Left_Str)); + Start_String (Strval (Left_Str)); + else + Start_String; + Store_String_Char (UI_To_CC (Char_Literal_Value (Left_Str))); + Left_Len := 1; + end if; + + -- Now append the characters of the right operand + + if Nkind (Right_Str) = N_String_Literal then + declare + S : constant String_Id := Strval (Right_Str); + + begin + for J in 1 .. String_Length (S) loop + Store_String_Char (Get_String_Char (S, J)); + end loop; + end; + else + Store_String_Char (UI_To_CC (Char_Literal_Value (Right_Str))); + end if; + + Set_Is_Static_Expression (N, Stat); + + if Stat then + + -- If left operand is the empty string, the result is the + -- right operand, including its bounds if anomalous. + + if Left_Len = 0 + and then Is_Array_Type (Etype (Right)) + and then Etype (Right) /= Any_String + then + Set_Etype (N, Etype (Right)); + end if; + + Fold_Str (N, End_String, True); + end if; + end; + end Eval_Concatenation; + + --------------------------------- + -- Eval_Conditional_Expression -- + --------------------------------- + + -- This GNAT internal construct can never be statically folded, so the + -- only required processing is to do the check for non-static context + -- for the two expression operands. + + procedure Eval_Conditional_Expression (N : Node_Id) is + Condition : constant Node_Id := First (Expressions (N)); + Then_Expr : constant Node_Id := Next (Condition); + Else_Expr : constant Node_Id := Next (Then_Expr); + + begin + Check_Non_Static_Context (Then_Expr); + Check_Non_Static_Context (Else_Expr); + end Eval_Conditional_Expression; + + ---------------------- + -- Eval_Entity_Name -- + ---------------------- + + -- This procedure is used for identifiers and expanded names other than + -- named numbers (see Eval_Named_Integer, Eval_Named_Real. These are + -- static if they denote a static constant (RM 4.9(6)) or if the name + -- denotes an enumeration literal (RM 4.9(22)). + + procedure Eval_Entity_Name (N : Node_Id) is + Def_Id : constant Entity_Id := Entity (N); + Val : Node_Id; + + begin + -- Enumeration literals are always considered to be constants + -- and cannot raise constraint error (RM 4.9(22)). + + if Ekind (Def_Id) = E_Enumeration_Literal then + Set_Is_Static_Expression (N); + return; + + -- A name is static if it denotes a static constant (RM 4.9(5)), and + -- we also copy Raise_Constraint_Error. Notice that even if non-static, + -- it does not violate 10.2.1(8) here, since this is not a variable. + + elsif Ekind (Def_Id) = E_Constant then + + -- Deferred constants must always be treated as nonstatic + -- outside the scope of their full view. + + if Present (Full_View (Def_Id)) + and then not In_Open_Scopes (Scope (Def_Id)) + then + Val := Empty; + else + Val := Constant_Value (Def_Id); + end if; + + if Present (Val) then + Set_Is_Static_Expression + (N, Is_Static_Expression (Val) + and then Is_Static_Subtype (Etype (Def_Id))); + Set_Raises_Constraint_Error (N, Raises_Constraint_Error (Val)); + + if not Is_Static_Expression (N) + and then not Is_Generic_Type (Etype (N)) + then + Validate_Static_Object_Name (N); + end if; + + return; + end if; + end if; + + -- Fall through if the name is not static + + Validate_Static_Object_Name (N); + end Eval_Entity_Name; + + ---------------------------- + -- Eval_Indexed_Component -- + ---------------------------- + + -- Indexed components are never static, so we need to perform the check + -- for non-static context on the index values. Then, we check if the + -- value can be obtained at compile time, even though it is non-static. + + procedure Eval_Indexed_Component (N : Node_Id) is + Expr : Node_Id; + + begin + -- Check for non-static context on index values + + Expr := First (Expressions (N)); + while Present (Expr) loop + Check_Non_Static_Context (Expr); + Next (Expr); + end loop; + + -- If the indexed component appears in an object renaming declaration + -- then we do not want to try to evaluate it, since in this case we + -- need the identity of the array element. + + if Nkind (Parent (N)) = N_Object_Renaming_Declaration then + return; + + -- Similarly if the indexed component appears as the prefix of an + -- attribute we don't want to evaluate it, because at least for + -- some cases of attributes we need the identify (e.g. Access, Size) + + elsif Nkind (Parent (N)) = N_Attribute_Reference then + return; + end if; + + -- Note: there are other cases, such as the left side of an assignment, + -- or an OUT parameter for a call, where the replacement results in the + -- illegal use of a constant, But these cases are illegal in the first + -- place, so the replacement, though silly, is harmless. + + -- Now see if this is a constant array reference + + if List_Length (Expressions (N)) = 1 + and then Is_Entity_Name (Prefix (N)) + and then Ekind (Entity (Prefix (N))) = E_Constant + and then Present (Constant_Value (Entity (Prefix (N)))) + then + declare + Loc : constant Source_Ptr := Sloc (N); + Arr : constant Node_Id := Constant_Value (Entity (Prefix (N))); + Sub : constant Node_Id := First (Expressions (N)); + + Atyp : Entity_Id; + -- Type of array + + Lin : Nat; + -- Linear one's origin subscript value for array reference + + Lbd : Node_Id; + -- Lower bound of the first array index + + Elm : Node_Id; + -- Value from constant array + + begin + Atyp := Etype (Arr); + + if Is_Access_Type (Atyp) then + Atyp := Designated_Type (Atyp); + end if; + + -- If we have an array type (we should have but perhaps there + -- are error cases where this is not the case), then see if we + -- can do a constant evaluation of the array reference. + + if Is_Array_Type (Atyp) then + if Ekind (Atyp) = E_String_Literal_Subtype then + Lbd := String_Literal_Low_Bound (Atyp); + else + Lbd := Type_Low_Bound (Etype (First_Index (Atyp))); + end if; + + if Compile_Time_Known_Value (Sub) + and then Nkind (Arr) = N_Aggregate + and then Compile_Time_Known_Value (Lbd) + and then Is_Discrete_Type (Component_Type (Atyp)) + then + Lin := UI_To_Int (Expr_Value (Sub) - Expr_Value (Lbd)) + 1; + + if List_Length (Expressions (Arr)) >= Lin then + Elm := Pick (Expressions (Arr), Lin); + + -- If the resulting expression is compile time known, + -- then we can rewrite the indexed component with this + -- value, being sure to mark the result as non-static. + -- We also reset the Sloc, in case this generates an + -- error later on (e.g. 136'Access). + + if Compile_Time_Known_Value (Elm) then + Rewrite (N, Duplicate_Subexpr_No_Checks (Elm)); + Set_Is_Static_Expression (N, False); + Set_Sloc (N, Loc); + end if; + end if; + end if; + end if; + end; + end if; + end Eval_Indexed_Component; + + -------------------------- + -- Eval_Integer_Literal -- + -------------------------- + + -- Numeric literals are static (RM 4.9(1)), and have already been marked + -- as static by the analyzer. The reason we did it that early is to allow + -- the possibility of turning off the Is_Static_Expression flag after + -- analysis, but before resolution, when integer literals are generated + -- in the expander that do not correspond to static expressions. + + procedure Eval_Integer_Literal (N : Node_Id) is + T : constant Entity_Id := Etype (N); + + function In_Any_Integer_Context return Boolean; + -- If the literal is resolved with a specific type in a context + -- where the expected type is Any_Integer, there are no range checks + -- on the literal. By the time the literal is evaluated, it carries + -- the type imposed by the enclosing expression, and we must recover + -- the context to determine that Any_Integer is meant. + + ---------------------------- + -- To_Any_Integer_Context -- + ---------------------------- + + function In_Any_Integer_Context return Boolean is + Par : constant Node_Id := Parent (N); + K : constant Node_Kind := Nkind (Par); + + begin + -- Any_Integer also appears in digits specifications for real types, + -- but those have bounds smaller that those of any integer base + -- type, so we can safely ignore these cases. + + return K = N_Number_Declaration + or else K = N_Attribute_Reference + or else K = N_Attribute_Definition_Clause + or else K = N_Modular_Type_Definition + or else K = N_Signed_Integer_Type_Definition; + end In_Any_Integer_Context; + + -- Start of processing for Eval_Integer_Literal + + begin + + -- If the literal appears in a non-expression context, then it is + -- certainly appearing in a non-static context, so check it. This + -- is actually a redundant check, since Check_Non_Static_Context + -- would check it, but it seems worth while avoiding the call. + + if Nkind (Parent (N)) not in N_Subexpr + and then not In_Any_Integer_Context + then + Check_Non_Static_Context (N); + end if; + + -- Modular integer literals must be in their base range + + if Is_Modular_Integer_Type (T) + and then Is_Out_Of_Range (N, Base_Type (T)) + then + Out_Of_Range (N); + end if; + end Eval_Integer_Literal; + + --------------------- + -- Eval_Logical_Op -- + --------------------- + + -- Logical operations are static functions, so the result is potentially + -- static if both operands are potentially static (RM 4.9(7), 4.9(20)). + + procedure Eval_Logical_Op (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Stat : Boolean; + Fold : Boolean; + + begin + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Compile time evaluation of logical operation + + declare + Left_Int : constant Uint := Expr_Value (Left); + Right_Int : constant Uint := Expr_Value (Right); + + begin + if Is_Modular_Integer_Type (Etype (N)) then + declare + Left_Bits : Bits (0 .. UI_To_Int (Esize (Etype (N))) - 1); + Right_Bits : Bits (0 .. UI_To_Int (Esize (Etype (N))) - 1); + + begin + To_Bits (Left_Int, Left_Bits); + To_Bits (Right_Int, Right_Bits); + + -- Note: should really be able to use array ops instead of + -- these loops, but they weren't working at the time ??? + + if Nkind (N) = N_Op_And then + for J in Left_Bits'Range loop + Left_Bits (J) := Left_Bits (J) and Right_Bits (J); + end loop; + + elsif Nkind (N) = N_Op_Or then + for J in Left_Bits'Range loop + Left_Bits (J) := Left_Bits (J) or Right_Bits (J); + end loop; + + else + pragma Assert (Nkind (N) = N_Op_Xor); + + for J in Left_Bits'Range loop + Left_Bits (J) := Left_Bits (J) xor Right_Bits (J); + end loop; + end if; + + Fold_Uint (N, From_Bits (Left_Bits, Etype (N)), Stat); + end; + + else + pragma Assert (Is_Boolean_Type (Etype (N))); + + if Nkind (N) = N_Op_And then + Fold_Uint (N, + Test (Is_True (Left_Int) and then Is_True (Right_Int)), Stat); + + elsif Nkind (N) = N_Op_Or then + Fold_Uint (N, + Test (Is_True (Left_Int) or else Is_True (Right_Int)), Stat); + + else + pragma Assert (Nkind (N) = N_Op_Xor); + Fold_Uint (N, + Test (Is_True (Left_Int) xor Is_True (Right_Int)), Stat); + end if; + end if; + end; + end Eval_Logical_Op; + + ------------------------ + -- Eval_Membership_Op -- + ------------------------ + + -- A membership test is potentially static if the expression is static, + -- and the range is a potentially static range, or is a subtype mark + -- denoting a static subtype (RM 4.9(12)). + + procedure Eval_Membership_Op (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Def_Id : Entity_Id; + Lo : Node_Id; + Hi : Node_Id; + Result : Boolean; + Stat : Boolean; + Fold : Boolean; + + begin + -- Ignore if error in either operand, except to make sure that + -- Any_Type is properly propagated to avoid junk cascaded errors. + + if Etype (Left) = Any_Type + or else Etype (Right) = Any_Type + then + Set_Etype (N, Any_Type); + return; + end if; + + -- Case of right operand is a subtype name + + if Is_Entity_Name (Right) then + Def_Id := Entity (Right); + + if (Is_Scalar_Type (Def_Id) or else Is_String_Type (Def_Id)) + and then Is_OK_Static_Subtype (Def_Id) + then + Test_Expression_Is_Foldable (N, Left, Stat, Fold); + + if not Fold or else not Stat then + return; + end if; + else + Check_Non_Static_Context (Left); + return; + end if; + + -- For string membership tests we will check the length + -- further below. + + if not Is_String_Type (Def_Id) then + Lo := Type_Low_Bound (Def_Id); + Hi := Type_High_Bound (Def_Id); + + else + Lo := Empty; + Hi := Empty; + end if; + + -- Case of right operand is a range + + else + if Is_Static_Range (Right) then + Test_Expression_Is_Foldable (N, Left, Stat, Fold); + + if not Fold or else not Stat then + return; + + -- If one bound of range raises CE, then don't try to fold + + elsif not Is_OK_Static_Range (Right) then + Check_Non_Static_Context (Left); + return; + end if; + + else + Check_Non_Static_Context (Left); + return; + end if; + + -- Here we know range is an OK static range + + Lo := Low_Bound (Right); + Hi := High_Bound (Right); + end if; + + -- For strings we check that the length of the string expression is + -- compatible with the string subtype if the subtype is constrained, + -- or if unconstrained then the test is always true. + + if Is_String_Type (Etype (Right)) then + if not Is_Constrained (Etype (Right)) then + Result := True; + + else + declare + Typlen : constant Uint := String_Type_Len (Etype (Right)); + Strlen : constant Uint := + UI_From_Int (String_Length (Strval (Get_String_Val (Left)))); + begin + Result := (Typlen = Strlen); + end; + end if; + + -- Fold the membership test. We know we have a static range and Lo + -- and Hi are set to the expressions for the end points of this range. + + elsif Is_Real_Type (Etype (Right)) then + declare + Leftval : constant Ureal := Expr_Value_R (Left); + + begin + Result := Expr_Value_R (Lo) <= Leftval + and then Leftval <= Expr_Value_R (Hi); + end; + + else + declare + Leftval : constant Uint := Expr_Value (Left); + + begin + Result := Expr_Value (Lo) <= Leftval + and then Leftval <= Expr_Value (Hi); + end; + end if; + + if Nkind (N) = N_Not_In then + Result := not Result; + end if; + + Fold_Uint (N, Test (Result), True); + Warn_On_Known_Condition (N); + end Eval_Membership_Op; + + ------------------------ + -- Eval_Named_Integer -- + ------------------------ + + procedure Eval_Named_Integer (N : Node_Id) is + begin + Fold_Uint (N, + Expr_Value (Expression (Declaration_Node (Entity (N)))), True); + end Eval_Named_Integer; + + --------------------- + -- Eval_Named_Real -- + --------------------- + + procedure Eval_Named_Real (N : Node_Id) is + begin + Fold_Ureal (N, + Expr_Value_R (Expression (Declaration_Node (Entity (N)))), True); + end Eval_Named_Real; + + ------------------- + -- Eval_Op_Expon -- + ------------------- + + -- Exponentiation is a static functions, so the result is potentially + -- static if both operands are potentially static (RM 4.9(7), 4.9(20)). + + procedure Eval_Op_Expon (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Stat : Boolean; + Fold : Boolean; + + begin + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Fold exponentiation operation + + declare + Right_Int : constant Uint := Expr_Value (Right); + + begin + -- Integer case + + if Is_Integer_Type (Etype (Left)) then + declare + Left_Int : constant Uint := Expr_Value (Left); + Result : Uint; + + begin + -- Exponentiation of an integer raises the exception + -- Constraint_Error for a negative exponent (RM 4.5.6) + + if Right_Int < 0 then + Apply_Compile_Time_Constraint_Error + (N, "integer exponent negative", + CE_Range_Check_Failed, + Warn => not Stat); + return; + + else + if OK_Bits (N, Num_Bits (Left_Int) * Right_Int) then + Result := Left_Int ** Right_Int; + else + Result := Left_Int; + end if; + + if Is_Modular_Integer_Type (Etype (N)) then + Result := Result mod Modulus (Etype (N)); + end if; + + Fold_Uint (N, Result, Stat); + end if; + end; + + -- Real case + + else + declare + Left_Real : constant Ureal := Expr_Value_R (Left); + + begin + -- Cannot have a zero base with a negative exponent + + if UR_Is_Zero (Left_Real) then + + if Right_Int < 0 then + Apply_Compile_Time_Constraint_Error + (N, "zero ** negative integer", + CE_Range_Check_Failed, + Warn => not Stat); + return; + else + Fold_Ureal (N, Ureal_0, Stat); + end if; + + else + Fold_Ureal (N, Left_Real ** Right_Int, Stat); + end if; + end; + end if; + end; + end Eval_Op_Expon; + + ----------------- + -- Eval_Op_Not -- + ----------------- + + -- The not operation is a static functions, so the result is potentially + -- static if the operand is potentially static (RM 4.9(7), 4.9(20)). + + procedure Eval_Op_Not (N : Node_Id) is + Right : constant Node_Id := Right_Opnd (N); + Stat : Boolean; + Fold : Boolean; + + begin + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Fold not operation + + declare + Rint : constant Uint := Expr_Value (Right); + Typ : constant Entity_Id := Etype (N); + + begin + -- Negation is equivalent to subtracting from the modulus minus + -- one. For a binary modulus this is equivalent to the ones- + -- component of the original value. For non-binary modulus this + -- is an arbitrary but consistent definition. + + if Is_Modular_Integer_Type (Typ) then + Fold_Uint (N, Modulus (Typ) - 1 - Rint, Stat); + + else + pragma Assert (Is_Boolean_Type (Typ)); + Fold_Uint (N, Test (not Is_True (Rint)), Stat); + end if; + + Set_Is_Static_Expression (N, Stat); + end; + end Eval_Op_Not; + + ------------------------------- + -- Eval_Qualified_Expression -- + ------------------------------- + + -- A qualified expression is potentially static if its subtype mark denotes + -- a static subtype and its expression is potentially static (RM 4.9 (11)). + + procedure Eval_Qualified_Expression (N : Node_Id) is + Operand : constant Node_Id := Expression (N); + Target_Type : constant Entity_Id := Entity (Subtype_Mark (N)); + + Stat : Boolean; + Fold : Boolean; + Hex : Boolean; + + begin + -- Can only fold if target is string or scalar and subtype is static + -- Also, do not fold if our parent is an allocator (this is because + -- the qualified expression is really part of the syntactic structure + -- of an allocator, and we do not want to end up with something that + -- corresponds to "new 1" where the 1 is the result of folding a + -- qualified expression). + + if not Is_Static_Subtype (Target_Type) + or else Nkind (Parent (N)) = N_Allocator + then + Check_Non_Static_Context (Operand); + + -- If operand is known to raise constraint_error, set the + -- flag on the expression so it does not get optimized away. + + if Nkind (Operand) = N_Raise_Constraint_Error then + Set_Raises_Constraint_Error (N); + end if; + + return; + end if; + + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Operand, Stat, Fold); + + if not Fold then + return; + + -- Don't try fold if target type has constraint error bounds + + elsif not Is_OK_Static_Subtype (Target_Type) then + Set_Raises_Constraint_Error (N); + return; + end if; + + -- Here we will fold, save Print_In_Hex indication + + Hex := Nkind (Operand) = N_Integer_Literal + and then Print_In_Hex (Operand); + + -- Fold the result of qualification + + if Is_Discrete_Type (Target_Type) then + Fold_Uint (N, Expr_Value (Operand), Stat); + + -- Preserve Print_In_Hex indication + + if Hex and then Nkind (N) = N_Integer_Literal then + Set_Print_In_Hex (N); + end if; + + elsif Is_Real_Type (Target_Type) then + Fold_Ureal (N, Expr_Value_R (Operand), Stat); + + else + Fold_Str (N, Strval (Get_String_Val (Operand)), Stat); + + if not Stat then + Set_Is_Static_Expression (N, False); + else + Check_String_Literal_Length (N, Target_Type); + end if; + + return; + end if; + + -- The expression may be foldable but not static + + Set_Is_Static_Expression (N, Stat); + + if Is_Out_Of_Range (N, Etype (N)) then + Out_Of_Range (N); + end if; + end Eval_Qualified_Expression; + + ----------------------- + -- Eval_Real_Literal -- + ----------------------- + + -- Numeric literals are static (RM 4.9(1)), and have already been marked + -- as static by the analyzer. The reason we did it that early is to allow + -- the possibility of turning off the Is_Static_Expression flag after + -- analysis, but before resolution, when integer literals are generated + -- in the expander that do not correspond to static expressions. + + procedure Eval_Real_Literal (N : Node_Id) is + begin + -- If the literal appears in a non-expression context, then it is + -- certainly appearing in a non-static context, so check it. + + if Nkind (Parent (N)) not in N_Subexpr then + Check_Non_Static_Context (N); + end if; + + end Eval_Real_Literal; + + ------------------------ + -- Eval_Relational_Op -- + ------------------------ + + -- Relational operations are static functions, so the result is static + -- if both operands are static (RM 4.9(7), 4.9(20)). + + procedure Eval_Relational_Op (N : Node_Id) is + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Typ : constant Entity_Id := Etype (Left); + Result : Boolean; + Stat : Boolean; + Fold : Boolean; + + begin + -- One special case to deal with first. If we can tell that + -- the result will be false because the lengths of one or + -- more index subtypes are compile time known and different, + -- then we can replace the entire result by False. We only + -- do this for one dimensional arrays, because the case of + -- multi-dimensional arrays is rare and too much trouble! + + if Is_Array_Type (Typ) + and then Number_Dimensions (Typ) = 1 + and then (Nkind (N) = N_Op_Eq + or else Nkind (N) = N_Op_Ne) + then + if Raises_Constraint_Error (Left) + or else Raises_Constraint_Error (Right) + then + return; + end if; + + declare + procedure Get_Static_Length (Op : Node_Id; Len : out Uint); + -- If Op is an expression for a constrained array with a + -- known at compile time length, then Len is set to this + -- (non-negative length). Otherwise Len is set to minus 1. + + ----------------------- + -- Get_Static_Length -- + ----------------------- + + procedure Get_Static_Length (Op : Node_Id; Len : out Uint) is + T : Entity_Id; + + begin + if Nkind (Op) = N_String_Literal then + Len := UI_From_Int (String_Length (Strval (Op))); + + elsif not Is_Constrained (Etype (Op)) then + Len := Uint_Minus_1; + + else + T := Etype (First_Index (Etype (Op))); + + if Is_Discrete_Type (T) + and then + Compile_Time_Known_Value (Type_Low_Bound (T)) + and then + Compile_Time_Known_Value (Type_High_Bound (T)) + then + Len := UI_Max (Uint_0, + Expr_Value (Type_High_Bound (T)) - + Expr_Value (Type_Low_Bound (T)) + 1); + else + Len := Uint_Minus_1; + end if; + end if; + end Get_Static_Length; + + Len_L : Uint; + Len_R : Uint; + + begin + Get_Static_Length (Left, Len_L); + Get_Static_Length (Right, Len_R); + + if Len_L /= Uint_Minus_1 + and then Len_R /= Uint_Minus_1 + and then Len_L /= Len_R + then + Fold_Uint (N, Test (Nkind (N) = N_Op_Ne), False); + Warn_On_Known_Condition (N); + return; + end if; + end; + + -- Another special case: comparisons of access types, where one or both + -- operands are known to be null, so the result can be determined. + + elsif Is_Access_Type (Typ) then + if Known_Null (Left) then + if Known_Null (Right) then + Fold_Uint (N, Test (Nkind (N) = N_Op_Eq), False); + Warn_On_Known_Condition (N); + return; + + elsif Known_Non_Null (Right) then + Fold_Uint (N, Test (Nkind (N) = N_Op_Ne), False); + Warn_On_Known_Condition (N); + return; + end if; + + elsif Known_Non_Null (Left) then + if Known_Null (Right) then + Fold_Uint (N, Test (Nkind (N) = N_Op_Ne), False); + Warn_On_Known_Condition (N); + return; + end if; + end if; + end if; + + -- Can only fold if type is scalar (don't fold string ops) + + if not Is_Scalar_Type (Typ) then + Check_Non_Static_Context (Left); + Check_Non_Static_Context (Right); + return; + end if; + + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Left, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Integer and Enumeration (discrete) type cases + + if Is_Discrete_Type (Typ) then + declare + Left_Int : constant Uint := Expr_Value (Left); + Right_Int : constant Uint := Expr_Value (Right); + + begin + case Nkind (N) is + when N_Op_Eq => Result := Left_Int = Right_Int; + when N_Op_Ne => Result := Left_Int /= Right_Int; + when N_Op_Lt => Result := Left_Int < Right_Int; + when N_Op_Le => Result := Left_Int <= Right_Int; + when N_Op_Gt => Result := Left_Int > Right_Int; + when N_Op_Ge => Result := Left_Int >= Right_Int; + + when others => + raise Program_Error; + end case; + + Fold_Uint (N, Test (Result), Stat); + end; + + -- Real type case + + else + pragma Assert (Is_Real_Type (Typ)); + + declare + Left_Real : constant Ureal := Expr_Value_R (Left); + Right_Real : constant Ureal := Expr_Value_R (Right); + + begin + case Nkind (N) is + when N_Op_Eq => Result := (Left_Real = Right_Real); + when N_Op_Ne => Result := (Left_Real /= Right_Real); + when N_Op_Lt => Result := (Left_Real < Right_Real); + when N_Op_Le => Result := (Left_Real <= Right_Real); + when N_Op_Gt => Result := (Left_Real > Right_Real); + when N_Op_Ge => Result := (Left_Real >= Right_Real); + + when others => + raise Program_Error; + end case; + + Fold_Uint (N, Test (Result), Stat); + end; + end if; + + Warn_On_Known_Condition (N); + end Eval_Relational_Op; + + ---------------- + -- Eval_Shift -- + ---------------- + + -- Shift operations are intrinsic operations that can never be static, + -- so the only processing required is to perform the required check for + -- a non static context for the two operands. + + -- Actually we could do some compile time evaluation here some time ??? + + procedure Eval_Shift (N : Node_Id) is + begin + Check_Non_Static_Context (Left_Opnd (N)); + Check_Non_Static_Context (Right_Opnd (N)); + end Eval_Shift; + + ------------------------ + -- Eval_Short_Circuit -- + ------------------------ + + -- A short circuit operation is potentially static if both operands + -- are potentially static (RM 4.9 (13)) + + procedure Eval_Short_Circuit (N : Node_Id) is + Kind : constant Node_Kind := Nkind (N); + Left : constant Node_Id := Left_Opnd (N); + Right : constant Node_Id := Right_Opnd (N); + Left_Int : Uint; + Rstat : constant Boolean := + Is_Static_Expression (Left) + and then Is_Static_Expression (Right); + + begin + -- Short circuit operations are never static in Ada 83 + + if Ada_Version = Ada_83 + and then Comes_From_Source (N) + then + Check_Non_Static_Context (Left); + Check_Non_Static_Context (Right); + return; + end if; + + -- Now look at the operands, we can't quite use the normal call to + -- Test_Expression_Is_Foldable here because short circuit operations + -- are a special case, they can still be foldable, even if the right + -- operand raises constraint error. + + -- If either operand is Any_Type, just propagate to result and + -- do not try to fold, this prevents cascaded errors. + + if Etype (Left) = Any_Type or else Etype (Right) = Any_Type then + Set_Etype (N, Any_Type); + return; + + -- If left operand raises constraint error, then replace node N with + -- the raise constraint error node, and we are obviously not foldable. + -- Is_Static_Expression is set from the two operands in the normal way, + -- and we check the right operand if it is in a non-static context. + + elsif Raises_Constraint_Error (Left) then + if not Rstat then + Check_Non_Static_Context (Right); + end if; + + Rewrite_In_Raise_CE (N, Left); + Set_Is_Static_Expression (N, Rstat); + return; + + -- If the result is not static, then we won't in any case fold + + elsif not Rstat then + Check_Non_Static_Context (Left); + Check_Non_Static_Context (Right); + return; + end if; + + -- Here the result is static, note that, unlike the normal processing + -- in Test_Expression_Is_Foldable, we did *not* check above to see if + -- the right operand raises constraint error, that's because it is not + -- significant if the left operand is decisive. + + Set_Is_Static_Expression (N); + + -- It does not matter if the right operand raises constraint error if + -- it will not be evaluated. So deal specially with the cases where + -- the right operand is not evaluated. Note that we will fold these + -- cases even if the right operand is non-static, which is fine, but + -- of course in these cases the result is not potentially static. + + Left_Int := Expr_Value (Left); + + if (Kind = N_And_Then and then Is_False (Left_Int)) + or else (Kind = N_Or_Else and Is_True (Left_Int)) + then + Fold_Uint (N, Left_Int, Rstat); + return; + end if; + + -- If first operand not decisive, then it does matter if the right + -- operand raises constraint error, since it will be evaluated, so + -- we simply replace the node with the right operand. Note that this + -- properly propagates Is_Static_Expression and Raises_Constraint_Error + -- (both are set to True in Right). + + if Raises_Constraint_Error (Right) then + Rewrite_In_Raise_CE (N, Right); + Check_Non_Static_Context (Left); + return; + end if; + + -- Otherwise the result depends on the right operand + + Fold_Uint (N, Expr_Value (Right), Rstat); + return; + end Eval_Short_Circuit; + + ---------------- + -- Eval_Slice -- + ---------------- + + -- Slices can never be static, so the only processing required is to + -- check for non-static context if an explicit range is given. + + procedure Eval_Slice (N : Node_Id) is + Drange : constant Node_Id := Discrete_Range (N); + + begin + if Nkind (Drange) = N_Range then + Check_Non_Static_Context (Low_Bound (Drange)); + Check_Non_Static_Context (High_Bound (Drange)); + end if; + end Eval_Slice; + + ------------------------- + -- Eval_String_Literal -- + ------------------------- + + procedure Eval_String_Literal (N : Node_Id) is + Typ : constant Entity_Id := Etype (N); + Bas : constant Entity_Id := Base_Type (Typ); + Xtp : Entity_Id; + Len : Nat; + Lo : Node_Id; + + begin + -- Nothing to do if error type (handles cases like default expressions + -- or generics where we have not yet fully resolved the type) + + if Bas = Any_Type or else Bas = Any_String then + return; + end if; + + -- String literals are static if the subtype is static (RM 4.9(2)), so + -- reset the static expression flag (it was set unconditionally in + -- Analyze_String_Literal) if the subtype is non-static. We tell if + -- the subtype is static by looking at the lower bound. + + if Ekind (Typ) = E_String_Literal_Subtype then + if not Is_OK_Static_Expression (String_Literal_Low_Bound (Typ)) then + Set_Is_Static_Expression (N, False); + return; + end if; + + -- Here if Etype of string literal is normal Etype (not yet possible, + -- but may be possible in future!) + + elsif not Is_OK_Static_Expression + (Type_Low_Bound (Etype (First_Index (Typ)))) + then + Set_Is_Static_Expression (N, False); + return; + end if; + + -- If original node was a type conversion, then result if non-static + + if Nkind (Original_Node (N)) = N_Type_Conversion then + Set_Is_Static_Expression (N, False); + return; + end if; + + -- Test for illegal Ada 95 cases. A string literal is illegal in + -- Ada 95 if its bounds are outside the index base type and this + -- index type is static. This can happen in only two ways. Either + -- the string literal is too long, or it is null, and the lower + -- bound is type'First. In either case it is the upper bound that + -- is out of range of the index type. + + if Ada_Version >= Ada_95 then + if Root_Type (Bas) = Standard_String + or else + Root_Type (Bas) = Standard_Wide_String + then + Xtp := Standard_Positive; + else + Xtp := Etype (First_Index (Bas)); + end if; + + if Ekind (Typ) = E_String_Literal_Subtype then + Lo := String_Literal_Low_Bound (Typ); + else + Lo := Type_Low_Bound (Etype (First_Index (Typ))); + end if; + + Len := String_Length (Strval (N)); + + if UI_From_Int (Len) > String_Type_Len (Bas) then + Apply_Compile_Time_Constraint_Error + (N, "string literal too long for}", CE_Length_Check_Failed, + Ent => Bas, + Typ => First_Subtype (Bas)); + + elsif Len = 0 + and then not Is_Generic_Type (Xtp) + and then + Expr_Value (Lo) = Expr_Value (Type_Low_Bound (Base_Type (Xtp))) + then + Apply_Compile_Time_Constraint_Error + (N, "null string literal not allowed for}", + CE_Length_Check_Failed, + Ent => Bas, + Typ => First_Subtype (Bas)); + end if; + end if; + end Eval_String_Literal; + + -------------------------- + -- Eval_Type_Conversion -- + -------------------------- + + -- A type conversion is potentially static if its subtype mark is for a + -- static scalar subtype, and its operand expression is potentially static + -- (RM 4.9 (10)) + + procedure Eval_Type_Conversion (N : Node_Id) is + Operand : constant Node_Id := Expression (N); + Source_Type : constant Entity_Id := Etype (Operand); + Target_Type : constant Entity_Id := Etype (N); + + Stat : Boolean; + Fold : Boolean; + + function To_Be_Treated_As_Integer (T : Entity_Id) return Boolean; + -- Returns true if type T is an integer type, or if it is a + -- fixed-point type to be treated as an integer (i.e. the flag + -- Conversion_OK is set on the conversion node). + + function To_Be_Treated_As_Real (T : Entity_Id) return Boolean; + -- Returns true if type T is a floating-point type, or if it is a + -- fixed-point type that is not to be treated as an integer (i.e. the + -- flag Conversion_OK is not set on the conversion node). + + ------------------------------ + -- To_Be_Treated_As_Integer -- + ------------------------------ + + function To_Be_Treated_As_Integer (T : Entity_Id) return Boolean is + begin + return + Is_Integer_Type (T) + or else (Is_Fixed_Point_Type (T) and then Conversion_OK (N)); + end To_Be_Treated_As_Integer; + + --------------------------- + -- To_Be_Treated_As_Real -- + --------------------------- + + function To_Be_Treated_As_Real (T : Entity_Id) return Boolean is + begin + return + Is_Floating_Point_Type (T) + or else (Is_Fixed_Point_Type (T) and then not Conversion_OK (N)); + end To_Be_Treated_As_Real; + + -- Start of processing for Eval_Type_Conversion + + begin + -- Cannot fold if target type is non-static or if semantic error + + if not Is_Static_Subtype (Target_Type) then + Check_Non_Static_Context (Operand); + return; + + elsif Error_Posted (N) then + return; + end if; + + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Operand, Stat, Fold); + + if not Fold then + return; + + -- Don't try fold if target type has constraint error bounds + + elsif not Is_OK_Static_Subtype (Target_Type) then + Set_Raises_Constraint_Error (N); + return; + end if; + + -- Remaining processing depends on operand types. Note that in the + -- following type test, fixed-point counts as real unless the flag + -- Conversion_OK is set, in which case it counts as integer. + + -- Fold conversion, case of string type. The result is not static + + if Is_String_Type (Target_Type) then + Fold_Str (N, Strval (Get_String_Val (Operand)), False); + + return; + + -- Fold conversion, case of integer target type + + elsif To_Be_Treated_As_Integer (Target_Type) then + declare + Result : Uint; + + begin + -- Integer to integer conversion + + if To_Be_Treated_As_Integer (Source_Type) then + Result := Expr_Value (Operand); + + -- Real to integer conversion + + else + Result := UR_To_Uint (Expr_Value_R (Operand)); + end if; + + -- If fixed-point type (Conversion_OK must be set), then the + -- result is logically an integer, but we must replace the + -- conversion with the corresponding real literal, since the + -- type from a semantic point of view is still fixed-point. + + if Is_Fixed_Point_Type (Target_Type) then + Fold_Ureal + (N, UR_From_Uint (Result) * Small_Value (Target_Type), Stat); + + -- Otherwise result is integer literal + + else + Fold_Uint (N, Result, Stat); + end if; + end; + + -- Fold conversion, case of real target type + + elsif To_Be_Treated_As_Real (Target_Type) then + declare + Result : Ureal; + + begin + if To_Be_Treated_As_Real (Source_Type) then + Result := Expr_Value_R (Operand); + else + Result := UR_From_Uint (Expr_Value (Operand)); + end if; + + Fold_Ureal (N, Result, Stat); + end; + + -- Enumeration types + + else + Fold_Uint (N, Expr_Value (Operand), Stat); + end if; + + if Is_Out_Of_Range (N, Etype (N)) then + Out_Of_Range (N); + end if; + + end Eval_Type_Conversion; + + ------------------- + -- Eval_Unary_Op -- + ------------------- + + -- Predefined unary operators are static functions (RM 4.9(20)) and thus + -- are potentially static if the operand is potentially static (RM 4.9(7)) + + procedure Eval_Unary_Op (N : Node_Id) is + Right : constant Node_Id := Right_Opnd (N); + Stat : Boolean; + Fold : Boolean; + + begin + -- If not foldable we are done + + Test_Expression_Is_Foldable (N, Right, Stat, Fold); + + if not Fold then + return; + end if; + + -- Fold for integer case + + if Is_Integer_Type (Etype (N)) then + declare + Rint : constant Uint := Expr_Value (Right); + Result : Uint; + + begin + -- In the case of modular unary plus and abs there is no need + -- to adjust the result of the operation since if the original + -- operand was in bounds the result will be in the bounds of the + -- modular type. However, in the case of modular unary minus the + -- result may go out of the bounds of the modular type and needs + -- adjustment. + + if Nkind (N) = N_Op_Plus then + Result := Rint; + + elsif Nkind (N) = N_Op_Minus then + if Is_Modular_Integer_Type (Etype (N)) then + Result := (-Rint) mod Modulus (Etype (N)); + else + Result := (-Rint); + end if; + + else + pragma Assert (Nkind (N) = N_Op_Abs); + Result := abs Rint; + end if; + + Fold_Uint (N, Result, Stat); + end; + + -- Fold for real case + + elsif Is_Real_Type (Etype (N)) then + declare + Rreal : constant Ureal := Expr_Value_R (Right); + Result : Ureal; + + begin + if Nkind (N) = N_Op_Plus then + Result := Rreal; + + elsif Nkind (N) = N_Op_Minus then + Result := UR_Negate (Rreal); + + else + pragma Assert (Nkind (N) = N_Op_Abs); + Result := abs Rreal; + end if; + + Fold_Ureal (N, Result, Stat); + end; + end if; + end Eval_Unary_Op; + + ------------------------------- + -- Eval_Unchecked_Conversion -- + ------------------------------- + + -- Unchecked conversions can never be static, so the only required + -- processing is to check for a non-static context for the operand. + + procedure Eval_Unchecked_Conversion (N : Node_Id) is + begin + Check_Non_Static_Context (Expression (N)); + end Eval_Unchecked_Conversion; + + -------------------- + -- Expr_Rep_Value -- + -------------------- + + function Expr_Rep_Value (N : Node_Id) return Uint is + Kind : constant Node_Kind := Nkind (N); + Ent : Entity_Id; + + begin + if Is_Entity_Name (N) then + Ent := Entity (N); + + -- An enumeration literal that was either in the source or + -- created as a result of static evaluation. + + if Ekind (Ent) = E_Enumeration_Literal then + return Enumeration_Rep (Ent); + + -- A user defined static constant + + else + pragma Assert (Ekind (Ent) = E_Constant); + return Expr_Rep_Value (Constant_Value (Ent)); + end if; + + -- An integer literal that was either in the source or created + -- as a result of static evaluation. + + elsif Kind = N_Integer_Literal then + return Intval (N); + + -- A real literal for a fixed-point type. This must be the fixed-point + -- case, either the literal is of a fixed-point type, or it is a bound + -- of a fixed-point type, with type universal real. In either case we + -- obtain the desired value from Corresponding_Integer_Value. + + elsif Kind = N_Real_Literal then + pragma Assert (Is_Fixed_Point_Type (Underlying_Type (Etype (N)))); + return Corresponding_Integer_Value (N); + + -- Peculiar VMS case, if we have xxx'Null_Parameter, return zero + + elsif Kind = N_Attribute_Reference + and then Attribute_Name (N) = Name_Null_Parameter + then + return Uint_0; + + -- Otherwise must be character literal + + else + pragma Assert (Kind = N_Character_Literal); + Ent := Entity (N); + + -- Since Character literals of type Standard.Character don't + -- have any defining character literals built for them, they + -- do not have their Entity set, so just use their Char + -- code. Otherwise for user-defined character literals use + -- their Pos value as usual which is the same as the Rep value. + + if No (Ent) then + return Char_Literal_Value (N); + else + return Enumeration_Rep (Ent); + end if; + end if; + end Expr_Rep_Value; + + ---------------- + -- Expr_Value -- + ---------------- + + function Expr_Value (N : Node_Id) return Uint is + Kind : constant Node_Kind := Nkind (N); + CV_Ent : CV_Entry renames CV_Cache (Nat (N) mod CV_Cache_Size); + Ent : Entity_Id; + Val : Uint; + + begin + -- If already in cache, then we know it's compile time known and + -- we can return the value that was previously stored in the cache + -- since compile time known values cannot change :-) + + if CV_Ent.N = N then + return CV_Ent.V; + end if; + + -- Otherwise proceed to test value + + if Is_Entity_Name (N) then + Ent := Entity (N); + + -- An enumeration literal that was either in the source or + -- created as a result of static evaluation. + + if Ekind (Ent) = E_Enumeration_Literal then + Val := Enumeration_Pos (Ent); + + -- A user defined static constant + + else + pragma Assert (Ekind (Ent) = E_Constant); + Val := Expr_Value (Constant_Value (Ent)); + end if; + + -- An integer literal that was either in the source or created + -- as a result of static evaluation. + + elsif Kind = N_Integer_Literal then + Val := Intval (N); + + -- A real literal for a fixed-point type. This must be the fixed-point + -- case, either the literal is of a fixed-point type, or it is a bound + -- of a fixed-point type, with type universal real. In either case we + -- obtain the desired value from Corresponding_Integer_Value. + + elsif Kind = N_Real_Literal then + + pragma Assert (Is_Fixed_Point_Type (Underlying_Type (Etype (N)))); + Val := Corresponding_Integer_Value (N); + + -- Peculiar VMS case, if we have xxx'Null_Parameter, return zero + + elsif Kind = N_Attribute_Reference + and then Attribute_Name (N) = Name_Null_Parameter + then + Val := Uint_0; + + -- Otherwise must be character literal + + else + pragma Assert (Kind = N_Character_Literal); + Ent := Entity (N); + + -- Since Character literals of type Standard.Character don't + -- have any defining character literals built for them, they + -- do not have their Entity set, so just use their Char + -- code. Otherwise for user-defined character literals use + -- their Pos value as usual. + + if No (Ent) then + Val := Char_Literal_Value (N); + else + Val := Enumeration_Pos (Ent); + end if; + end if; + + -- Come here with Val set to value to be returned, set cache + + CV_Ent.N := N; + CV_Ent.V := Val; + return Val; + end Expr_Value; + + ------------------ + -- Expr_Value_E -- + ------------------ + + function Expr_Value_E (N : Node_Id) return Entity_Id is + Ent : constant Entity_Id := Entity (N); + + begin + if Ekind (Ent) = E_Enumeration_Literal then + return Ent; + else + pragma Assert (Ekind (Ent) = E_Constant); + return Expr_Value_E (Constant_Value (Ent)); + end if; + end Expr_Value_E; + + ------------------ + -- Expr_Value_R -- + ------------------ + + function Expr_Value_R (N : Node_Id) return Ureal is + Kind : constant Node_Kind := Nkind (N); + Ent : Entity_Id; + Expr : Node_Id; + + begin + if Kind = N_Real_Literal then + return Realval (N); + + elsif Kind = N_Identifier or else Kind = N_Expanded_Name then + Ent := Entity (N); + pragma Assert (Ekind (Ent) = E_Constant); + return Expr_Value_R (Constant_Value (Ent)); + + elsif Kind = N_Integer_Literal then + return UR_From_Uint (Expr_Value (N)); + + -- Strange case of VAX literals, which are at this stage transformed + -- into Vax_Type!x_To_y(IEEE_Literal). See Expand_N_Real_Literal in + -- Exp_Vfpt for further details. + + elsif Vax_Float (Etype (N)) + and then Nkind (N) = N_Unchecked_Type_Conversion + then + Expr := Expression (N); + + if Nkind (Expr) = N_Function_Call + and then Present (Parameter_Associations (Expr)) + then + Expr := First (Parameter_Associations (Expr)); + + if Nkind (Expr) = N_Real_Literal then + return Realval (Expr); + end if; + end if; + + -- Peculiar VMS case, if we have xxx'Null_Parameter, return 0.0 + + elsif Kind = N_Attribute_Reference + and then Attribute_Name (N) = Name_Null_Parameter + then + return Ureal_0; + end if; + + -- If we fall through, we have a node that cannot be interepreted + -- as a compile time constant. That is definitely an error. + + raise Program_Error; + end Expr_Value_R; + + ------------------ + -- Expr_Value_S -- + ------------------ + + function Expr_Value_S (N : Node_Id) return Node_Id is + begin + if Nkind (N) = N_String_Literal then + return N; + else + pragma Assert (Ekind (Entity (N)) = E_Constant); + return Expr_Value_S (Constant_Value (Entity (N))); + end if; + end Expr_Value_S; + + -------------------------- + -- Flag_Non_Static_Expr -- + -------------------------- + + procedure Flag_Non_Static_Expr (Msg : String; Expr : Node_Id) is + begin + if Error_Posted (Expr) and then not All_Errors_Mode then + return; + else + Error_Msg_F (Msg, Expr); + Why_Not_Static (Expr); + end if; + end Flag_Non_Static_Expr; + + -------------- + -- Fold_Str -- + -------------- + + procedure Fold_Str (N : Node_Id; Val : String_Id; Static : Boolean) is + Loc : constant Source_Ptr := Sloc (N); + Typ : constant Entity_Id := Etype (N); + + begin + Rewrite (N, Make_String_Literal (Loc, Strval => Val)); + + -- We now have the literal with the right value, both the actual type + -- and the expected type of this literal are taken from the expression + -- that was evaluated. + + Analyze (N); + Set_Is_Static_Expression (N, Static); + Set_Etype (N, Typ); + Resolve (N); + end Fold_Str; + + --------------- + -- Fold_Uint -- + --------------- + + procedure Fold_Uint (N : Node_Id; Val : Uint; Static : Boolean) is + Loc : constant Source_Ptr := Sloc (N); + Typ : Entity_Id := Etype (N); + Ent : Entity_Id; + + begin + -- If we are folding a named number, retain the entity in the + -- literal, for ASIS use. + + if Is_Entity_Name (N) + and then Ekind (Entity (N)) = E_Named_Integer + then + Ent := Entity (N); + else + Ent := Empty; + end if; + + if Is_Private_Type (Typ) then + Typ := Full_View (Typ); + end if; + + -- For a result of type integer, subsitute an N_Integer_Literal node + -- for the result of the compile time evaluation of the expression. + + if Is_Integer_Type (Typ) then + Rewrite (N, Make_Integer_Literal (Loc, Val)); + Set_Original_Entity (N, Ent); + + -- Otherwise we have an enumeration type, and we substitute either + -- an N_Identifier or N_Character_Literal to represent the enumeration + -- literal corresponding to the given value, which must always be in + -- range, because appropriate tests have already been made for this. + + else pragma Assert (Is_Enumeration_Type (Typ)); + Rewrite (N, Get_Enum_Lit_From_Pos (Etype (N), Val, Loc)); + end if; + + -- We now have the literal with the right value, both the actual type + -- and the expected type of this literal are taken from the expression + -- that was evaluated. + + Analyze (N); + Set_Is_Static_Expression (N, Static); + Set_Etype (N, Typ); + Resolve (N); + end Fold_Uint; + + ---------------- + -- Fold_Ureal -- + ---------------- + + procedure Fold_Ureal (N : Node_Id; Val : Ureal; Static : Boolean) is + Loc : constant Source_Ptr := Sloc (N); + Typ : constant Entity_Id := Etype (N); + Ent : Entity_Id; + + begin + -- If we are folding a named number, retain the entity in the + -- literal, for ASIS use. + + if Is_Entity_Name (N) + and then Ekind (Entity (N)) = E_Named_Real + then + Ent := Entity (N); + else + Ent := Empty; + end if; + + Rewrite (N, Make_Real_Literal (Loc, Realval => Val)); + Set_Original_Entity (N, Ent); + + -- Both the actual and expected type comes from the original expression + + Analyze (N); + Set_Is_Static_Expression (N, Static); + Set_Etype (N, Typ); + Resolve (N); + end Fold_Ureal; + + --------------- + -- From_Bits -- + --------------- + + function From_Bits (B : Bits; T : Entity_Id) return Uint is + V : Uint := Uint_0; + + begin + for J in 0 .. B'Last loop + if B (J) then + V := V + 2 ** J; + end if; + end loop; + + if Non_Binary_Modulus (T) then + V := V mod Modulus (T); + end if; + + return V; + end From_Bits; + + -------------------- + -- Get_String_Val -- + -------------------- + + function Get_String_Val (N : Node_Id) return Node_Id is + begin + if Nkind (N) = N_String_Literal then + return N; + + elsif Nkind (N) = N_Character_Literal then + return N; + + else + pragma Assert (Is_Entity_Name (N)); + return Get_String_Val (Constant_Value (Entity (N))); + end if; + end Get_String_Val; + + ---------------- + -- Initialize -- + ---------------- + + procedure Initialize is + begin + CV_Cache := (others => (Node_High_Bound, Uint_0)); + end Initialize; + + -------------------- + -- In_Subrange_Of -- + -------------------- + + function In_Subrange_Of + (T1 : Entity_Id; + T2 : Entity_Id; + Fixed_Int : Boolean := False) return Boolean + is + L1 : Node_Id; + H1 : Node_Id; + + L2 : Node_Id; + H2 : Node_Id; + + begin + if T1 = T2 or else Is_Subtype_Of (T1, T2) then + return True; + + -- Never in range if both types are not scalar. Don't know if this can + -- actually happen, but just in case. + + elsif not Is_Scalar_Type (T1) or else not Is_Scalar_Type (T1) then + return False; + + else + L1 := Type_Low_Bound (T1); + H1 := Type_High_Bound (T1); + + L2 := Type_Low_Bound (T2); + H2 := Type_High_Bound (T2); + + -- Check bounds to see if comparison possible at compile time + + if Compile_Time_Compare (L1, L2) in Compare_GE + and then + Compile_Time_Compare (H1, H2) in Compare_LE + then + return True; + end if; + + -- If bounds not comparable at compile time, then the bounds of T2 + -- must be compile time known or we cannot answer the query. + + if not Compile_Time_Known_Value (L2) + or else not Compile_Time_Known_Value (H2) + then + return False; + end if; + + -- If the bounds of T1 are know at compile time then use these + -- ones, otherwise use the bounds of the base type (which are of + -- course always static). + + if not Compile_Time_Known_Value (L1) then + L1 := Type_Low_Bound (Base_Type (T1)); + end if; + + if not Compile_Time_Known_Value (H1) then + H1 := Type_High_Bound (Base_Type (T1)); + end if; + + -- Fixed point types should be considered as such only if + -- flag Fixed_Int is set to False. + + if Is_Floating_Point_Type (T1) or else Is_Floating_Point_Type (T2) + or else (Is_Fixed_Point_Type (T1) and then not Fixed_Int) + or else (Is_Fixed_Point_Type (T2) and then not Fixed_Int) + then + return + Expr_Value_R (L2) <= Expr_Value_R (L1) + and then + Expr_Value_R (H2) >= Expr_Value_R (H1); + + else + return + Expr_Value (L2) <= Expr_Value (L1) + and then + Expr_Value (H2) >= Expr_Value (H1); + + end if; + end if; + + -- If any exception occurs, it means that we have some bug in the compiler + -- possibly triggered by a previous error, or by some unforseen peculiar + -- occurrence. However, this is only an optimization attempt, so there is + -- really no point in crashing the compiler. Instead we just decide, too + -- bad, we can't figure out the answer in this case after all. + + exception + when others => + + -- Debug flag K disables this behavior (useful for debugging) + + if Debug_Flag_K then + raise; + else + return False; + end if; + end In_Subrange_Of; + + ----------------- + -- Is_In_Range -- + ----------------- + + function Is_In_Range + (N : Node_Id; + Typ : Entity_Id; + Fixed_Int : Boolean := False; + Int_Real : Boolean := False) return Boolean + is + Val : Uint; + Valr : Ureal; + + begin + -- Universal types have no range limits, so always in range + + if Typ = Universal_Integer or else Typ = Universal_Real then + return True; + + -- Never in range if not scalar type. Don't know if this can + -- actually happen, but our spec allows it, so we must check! + + elsif not Is_Scalar_Type (Typ) then + return False; + + -- Never in range unless we have a compile time known value + + elsif not Compile_Time_Known_Value (N) then + return False; + + else + declare + Lo : constant Node_Id := Type_Low_Bound (Typ); + Hi : constant Node_Id := Type_High_Bound (Typ); + LB_Known : constant Boolean := Compile_Time_Known_Value (Lo); + UB_Known : constant Boolean := Compile_Time_Known_Value (Hi); + + begin + -- Fixed point types should be considered as such only in + -- flag Fixed_Int is set to False. + + if Is_Floating_Point_Type (Typ) + or else (Is_Fixed_Point_Type (Typ) and then not Fixed_Int) + or else Int_Real + then + Valr := Expr_Value_R (N); + + if LB_Known and then Valr >= Expr_Value_R (Lo) + and then UB_Known and then Valr <= Expr_Value_R (Hi) + then + return True; + else + return False; + end if; + + else + Val := Expr_Value (N); + + if LB_Known and then Val >= Expr_Value (Lo) + and then UB_Known and then Val <= Expr_Value (Hi) + then + return True; + else + return False; + end if; + end if; + end; + end if; + end Is_In_Range; + + ------------------- + -- Is_Null_Range -- + ------------------- + + function Is_Null_Range (Lo : Node_Id; Hi : Node_Id) return Boolean is + Typ : constant Entity_Id := Etype (Lo); + + begin + if not Compile_Time_Known_Value (Lo) + or else not Compile_Time_Known_Value (Hi) + then + return False; + end if; + + if Is_Discrete_Type (Typ) then + return Expr_Value (Lo) > Expr_Value (Hi); + + else + pragma Assert (Is_Real_Type (Typ)); + return Expr_Value_R (Lo) > Expr_Value_R (Hi); + end if; + end Is_Null_Range; + + ----------------------------- + -- Is_OK_Static_Expression -- + ----------------------------- + + function Is_OK_Static_Expression (N : Node_Id) return Boolean is + begin + return Is_Static_Expression (N) + and then not Raises_Constraint_Error (N); + end Is_OK_Static_Expression; + + ------------------------ + -- Is_OK_Static_Range -- + ------------------------ + + -- A static range is a range whose bounds are static expressions, or a + -- Range_Attribute_Reference equivalent to such a range (RM 4.9(26)). + -- We have already converted range attribute references, so we get the + -- "or" part of this rule without needing a special test. + + function Is_OK_Static_Range (N : Node_Id) return Boolean is + begin + return Is_OK_Static_Expression (Low_Bound (N)) + and then Is_OK_Static_Expression (High_Bound (N)); + end Is_OK_Static_Range; + + -------------------------- + -- Is_OK_Static_Subtype -- + -------------------------- + + -- Determines if Typ is a static subtype as defined in (RM 4.9(26)) + -- where neither bound raises constraint error when evaluated. + + function Is_OK_Static_Subtype (Typ : Entity_Id) return Boolean is + Base_T : constant Entity_Id := Base_Type (Typ); + Anc_Subt : Entity_Id; + + begin + -- First a quick check on the non static subtype flag. As described + -- in further detail in Einfo, this flag is not decisive in all cases, + -- but if it is set, then the subtype is definitely non-static. + + if Is_Non_Static_Subtype (Typ) then + return False; + end if; + + Anc_Subt := Ancestor_Subtype (Typ); + + if Anc_Subt = Empty then + Anc_Subt := Base_T; + end if; + + if Is_Generic_Type (Root_Type (Base_T)) + or else Is_Generic_Actual_Type (Base_T) + then + return False; + + -- String types + + elsif Is_String_Type (Typ) then + return + Ekind (Typ) = E_String_Literal_Subtype + or else + (Is_OK_Static_Subtype (Component_Type (Typ)) + and then Is_OK_Static_Subtype (Etype (First_Index (Typ)))); + + -- Scalar types + + elsif Is_Scalar_Type (Typ) then + if Base_T = Typ then + return True; + + else + -- Scalar_Range (Typ) might be an N_Subtype_Indication, so + -- use Get_Type_Low,High_Bound. + + return Is_OK_Static_Subtype (Anc_Subt) + and then Is_OK_Static_Expression (Type_Low_Bound (Typ)) + and then Is_OK_Static_Expression (Type_High_Bound (Typ)); + end if; + + -- Types other than string and scalar types are never static + + else + return False; + end if; + end Is_OK_Static_Subtype; + + --------------------- + -- Is_Out_Of_Range -- + --------------------- + + function Is_Out_Of_Range + (N : Node_Id; + Typ : Entity_Id; + Fixed_Int : Boolean := False; + Int_Real : Boolean := False) return Boolean + is + Val : Uint; + Valr : Ureal; + + begin + -- Universal types have no range limits, so always in range + + if Typ = Universal_Integer or else Typ = Universal_Real then + return False; + + -- Never out of range if not scalar type. Don't know if this can + -- actually happen, but our spec allows it, so we must check! + + elsif not Is_Scalar_Type (Typ) then + return False; + + -- Never out of range if this is a generic type, since the bounds + -- of generic types are junk. Note that if we only checked for + -- static expressions (instead of compile time known values) below, + -- we would not need this check, because values of a generic type + -- can never be static, but they can be known at compile time. + + elsif Is_Generic_Type (Typ) then + return False; + + -- Never out of range unless we have a compile time known value + + elsif not Compile_Time_Known_Value (N) then + return False; + + else + declare + Lo : constant Node_Id := Type_Low_Bound (Typ); + Hi : constant Node_Id := Type_High_Bound (Typ); + LB_Known : constant Boolean := Compile_Time_Known_Value (Lo); + UB_Known : constant Boolean := Compile_Time_Known_Value (Hi); + + begin + -- Real types (note that fixed-point types are not treated + -- as being of a real type if the flag Fixed_Int is set, + -- since in that case they are regarded as integer types). + + if Is_Floating_Point_Type (Typ) + or else (Is_Fixed_Point_Type (Typ) and then not Fixed_Int) + or else Int_Real + then + Valr := Expr_Value_R (N); + + if LB_Known and then Valr < Expr_Value_R (Lo) then + return True; + + elsif UB_Known and then Expr_Value_R (Hi) < Valr then + return True; + + else + return False; + end if; + + else + Val := Expr_Value (N); + + if LB_Known and then Val < Expr_Value (Lo) then + return True; + + elsif UB_Known and then Expr_Value (Hi) < Val then + return True; + + else + return False; + end if; + end if; + end; + end if; + end Is_Out_Of_Range; + + --------------------- + -- Is_Static_Range -- + --------------------- + + -- A static range is a range whose bounds are static expressions, or a + -- Range_Attribute_Reference equivalent to such a range (RM 4.9(26)). + -- We have already converted range attribute references, so we get the + -- "or" part of this rule without needing a special test. + + function Is_Static_Range (N : Node_Id) return Boolean is + begin + return Is_Static_Expression (Low_Bound (N)) + and then Is_Static_Expression (High_Bound (N)); + end Is_Static_Range; + + ----------------------- + -- Is_Static_Subtype -- + ----------------------- + + -- Determines if Typ is a static subtype as defined in (RM 4.9(26)) + + function Is_Static_Subtype (Typ : Entity_Id) return Boolean is + Base_T : constant Entity_Id := Base_Type (Typ); + Anc_Subt : Entity_Id; + + begin + -- First a quick check on the non static subtype flag. As described + -- in further detail in Einfo, this flag is not decisive in all cases, + -- but if it is set, then the subtype is definitely non-static. + + if Is_Non_Static_Subtype (Typ) then + return False; + end if; + + Anc_Subt := Ancestor_Subtype (Typ); + + if Anc_Subt = Empty then + Anc_Subt := Base_T; + end if; + + if Is_Generic_Type (Root_Type (Base_T)) + or else Is_Generic_Actual_Type (Base_T) + then + return False; + + -- String types + + elsif Is_String_Type (Typ) then + return + Ekind (Typ) = E_String_Literal_Subtype + or else + (Is_Static_Subtype (Component_Type (Typ)) + and then Is_Static_Subtype (Etype (First_Index (Typ)))); + + -- Scalar types + + elsif Is_Scalar_Type (Typ) then + if Base_T = Typ then + return True; + + else + return Is_Static_Subtype (Anc_Subt) + and then Is_Static_Expression (Type_Low_Bound (Typ)) + and then Is_Static_Expression (Type_High_Bound (Typ)); + end if; + + -- Types other than string and scalar types are never static + + else + return False; + end if; + end Is_Static_Subtype; + + -------------------- + -- Not_Null_Range -- + -------------------- + + function Not_Null_Range (Lo : Node_Id; Hi : Node_Id) return Boolean is + Typ : constant Entity_Id := Etype (Lo); + + begin + if not Compile_Time_Known_Value (Lo) + or else not Compile_Time_Known_Value (Hi) + then + return False; + end if; + + if Is_Discrete_Type (Typ) then + return Expr_Value (Lo) <= Expr_Value (Hi); + + else + pragma Assert (Is_Real_Type (Typ)); + + return Expr_Value_R (Lo) <= Expr_Value_R (Hi); + end if; + end Not_Null_Range; + + ------------- + -- OK_Bits -- + ------------- + + function OK_Bits (N : Node_Id; Bits : Uint) return Boolean is + begin + -- We allow a maximum of 500,000 bits which seems a reasonable limit + + if Bits < 500_000 then + return True; + + else + Error_Msg_N ("static value too large, capacity exceeded", N); + return False; + end if; + end OK_Bits; + + ------------------ + -- Out_Of_Range -- + ------------------ + + procedure Out_Of_Range (N : Node_Id) is + begin + -- If we have the static expression case, then this is an illegality + -- in Ada 95 mode, except that in an instance, we never generate an + -- error (if the error is legitimate, it was already diagnosed in + -- the template). The expression to compute the length of a packed + -- array is attached to the array type itself, and deserves a separate + -- message. + + if Is_Static_Expression (N) + and then not In_Instance + and then not In_Inlined_Body + and then Ada_Version >= Ada_95 + then + if Nkind (Parent (N)) = N_Defining_Identifier + and then Is_Array_Type (Parent (N)) + and then Present (Packed_Array_Type (Parent (N))) + and then Present (First_Rep_Item (Parent (N))) + then + Error_Msg_N + ("length of packed array must not exceed Integer''Last", + First_Rep_Item (Parent (N))); + Rewrite (N, Make_Integer_Literal (Sloc (N), Uint_1)); + + else + Apply_Compile_Time_Constraint_Error + (N, "value not in range of}", CE_Range_Check_Failed); + end if; + + -- Here we generate a warning for the Ada 83 case, or when we are + -- in an instance, or when we have a non-static expression case. + + else + Apply_Compile_Time_Constraint_Error + (N, "value not in range of}?", CE_Range_Check_Failed); + end if; + end Out_Of_Range; + + ------------------------- + -- Rewrite_In_Raise_CE -- + ------------------------- + + procedure Rewrite_In_Raise_CE (N : Node_Id; Exp : Node_Id) is + Typ : constant Entity_Id := Etype (N); + + begin + -- If we want to raise CE in the condition of a raise_CE node + -- we may as well get rid of the condition + + if Present (Parent (N)) + and then Nkind (Parent (N)) = N_Raise_Constraint_Error + then + Set_Condition (Parent (N), Empty); + + -- If the expression raising CE is a N_Raise_CE node, we can use + -- that one. We just preserve the type of the context + + elsif Nkind (Exp) = N_Raise_Constraint_Error then + Rewrite (N, Exp); + Set_Etype (N, Typ); + + -- We have to build an explicit raise_ce node + + else + Rewrite (N, + Make_Raise_Constraint_Error (Sloc (Exp), + Reason => CE_Range_Check_Failed)); + Set_Raises_Constraint_Error (N); + Set_Etype (N, Typ); + end if; + end Rewrite_In_Raise_CE; + + --------------------- + -- String_Type_Len -- + --------------------- + + function String_Type_Len (Stype : Entity_Id) return Uint is + NT : constant Entity_Id := Etype (First_Index (Stype)); + T : Entity_Id; + + begin + if Is_OK_Static_Subtype (NT) then + T := NT; + else + T := Base_Type (NT); + end if; + + return Expr_Value (Type_High_Bound (T)) - + Expr_Value (Type_Low_Bound (T)) + 1; + end String_Type_Len; + + ------------------------------------ + -- Subtypes_Statically_Compatible -- + ------------------------------------ + + function Subtypes_Statically_Compatible + (T1 : Entity_Id; + T2 : Entity_Id) return Boolean + is + begin + if Is_Scalar_Type (T1) then + + -- Definitely compatible if we match + + if Subtypes_Statically_Match (T1, T2) then + return True; + + -- If either subtype is nonstatic then they're not compatible + + elsif not Is_Static_Subtype (T1) + or else not Is_Static_Subtype (T2) + then + return False; + + -- If either type has constraint error bounds, then consider that + -- they match to avoid junk cascaded errors here. + + elsif not Is_OK_Static_Subtype (T1) + or else not Is_OK_Static_Subtype (T2) + then + return True; + + -- Base types must match, but we don't check that (should + -- we???) but we do at least check that both types are + -- real, or both types are not real. + + elsif Is_Real_Type (T1) /= Is_Real_Type (T2) then + return False; + + -- Here we check the bounds + + else + declare + LB1 : constant Node_Id := Type_Low_Bound (T1); + HB1 : constant Node_Id := Type_High_Bound (T1); + LB2 : constant Node_Id := Type_Low_Bound (T2); + HB2 : constant Node_Id := Type_High_Bound (T2); + + begin + if Is_Real_Type (T1) then + return + (Expr_Value_R (LB1) > Expr_Value_R (HB1)) + or else + (Expr_Value_R (LB2) <= Expr_Value_R (LB1) + and then + Expr_Value_R (HB1) <= Expr_Value_R (HB2)); + + else + return + (Expr_Value (LB1) > Expr_Value (HB1)) + or else + (Expr_Value (LB2) <= Expr_Value (LB1) + and then + Expr_Value (HB1) <= Expr_Value (HB2)); + end if; + end; + end if; + + elsif Is_Access_Type (T1) then + return not Is_Constrained (T2) + or else Subtypes_Statically_Match + (Designated_Type (T1), Designated_Type (T2)); + + else + return (Is_Composite_Type (T1) and then not Is_Constrained (T2)) + or else Subtypes_Statically_Match (T1, T2); + end if; + end Subtypes_Statically_Compatible; + + ------------------------------- + -- Subtypes_Statically_Match -- + ------------------------------- + + -- Subtypes statically match if they have statically matching constraints + -- (RM 4.9.1(2)). Constraints statically match if there are none, or if + -- they are the same identical constraint, or if they are static and the + -- values match (RM 4.9.1(1)). + + function Subtypes_Statically_Match (T1, T2 : Entity_Id) return Boolean is + begin + -- A type always statically matches itself + + if T1 = T2 then + return True; + + -- Scalar types + + elsif Is_Scalar_Type (T1) then + + -- Base types must be the same + + if Base_Type (T1) /= Base_Type (T2) then + return False; + end if; + + -- A constrained numeric subtype never matches an unconstrained + -- subtype, i.e. both types must be constrained or unconstrained. + + -- To understand the requirement for this test, see RM 4.9.1(1). + -- As is made clear in RM 3.5.4(11), type Integer, for example + -- is a constrained subtype with constraint bounds matching the + -- bounds of its corresponding uncontrained base type. In this + -- situation, Integer and Integer'Base do not statically match, + -- even though they have the same bounds. + + -- We only apply this test to types in Standard and types that + -- appear in user programs. That way, we do not have to be + -- too careful about setting Is_Constrained right for itypes. + + if Is_Numeric_Type (T1) + and then (Is_Constrained (T1) /= Is_Constrained (T2)) + and then (Scope (T1) = Standard_Standard + or else Comes_From_Source (T1)) + and then (Scope (T2) = Standard_Standard + or else Comes_From_Source (T2)) + then + return False; + + -- A generic scalar type does not statically match its base + -- type (AI-311). In this case we make sure that the formals, + -- which are first subtypes of their bases, are constrained. + + elsif Is_Generic_Type (T1) + and then Is_Generic_Type (T2) + and then (Is_Constrained (T1) /= Is_Constrained (T2)) + then + return False; + end if; + + -- If there was an error in either range, then just assume + -- the types statically match to avoid further junk errors + + if Error_Posted (Scalar_Range (T1)) + or else + Error_Posted (Scalar_Range (T2)) + then + return True; + end if; + + -- Otherwise both types have bound that can be compared + + declare + LB1 : constant Node_Id := Type_Low_Bound (T1); + HB1 : constant Node_Id := Type_High_Bound (T1); + LB2 : constant Node_Id := Type_Low_Bound (T2); + HB2 : constant Node_Id := Type_High_Bound (T2); + + begin + -- If the bounds are the same tree node, then match + + if LB1 = LB2 and then HB1 = HB2 then + return True; + + -- Otherwise bounds must be static and identical value + + else + if not Is_Static_Subtype (T1) + or else not Is_Static_Subtype (T2) + then + return False; + + -- If either type has constraint error bounds, then say + -- that they match to avoid junk cascaded errors here. + + elsif not Is_OK_Static_Subtype (T1) + or else not Is_OK_Static_Subtype (T2) + then + return True; + + elsif Is_Real_Type (T1) then + return + (Expr_Value_R (LB1) = Expr_Value_R (LB2)) + and then + (Expr_Value_R (HB1) = Expr_Value_R (HB2)); + + else + return + Expr_Value (LB1) = Expr_Value (LB2) + and then + Expr_Value (HB1) = Expr_Value (HB2); + end if; + end if; + end; + + -- Type with discriminants + + elsif Has_Discriminants (T1) or else Has_Discriminants (T2) then + + -- Because of view exchanges in multiple instantiations, conformance + -- checking might try to match a partial view of a type with no + -- discriminants with a full view that has defaulted discriminants. + -- In such a case, use the discriminant constraint of the full view, + -- which must exist because we know that the two subtypes have the + -- same base type. + + if Has_Discriminants (T1) /= Has_Discriminants (T2) then + if In_Instance then + if Is_Private_Type (T2) + and then Present (Full_View (T2)) + and then Has_Discriminants (Full_View (T2)) + then + return Subtypes_Statically_Match (T1, Full_View (T2)); + + elsif Is_Private_Type (T1) + and then Present (Full_View (T1)) + and then Has_Discriminants (Full_View (T1)) + then + return Subtypes_Statically_Match (Full_View (T1), T2); + + else + return False; + end if; + else + return False; + end if; + end if; + + declare + DL1 : constant Elist_Id := Discriminant_Constraint (T1); + DL2 : constant Elist_Id := Discriminant_Constraint (T2); + + DA1 : Elmt_Id := First_Elmt (DL1); + DA2 : Elmt_Id := First_Elmt (DL2); + + begin + if DL1 = DL2 then + return True; + + elsif Is_Constrained (T1) /= Is_Constrained (T2) then + return False; + end if; + + while Present (DA1) loop + declare + Expr1 : constant Node_Id := Node (DA1); + Expr2 : constant Node_Id := Node (DA2); + + begin + if not Is_Static_Expression (Expr1) + or else not Is_Static_Expression (Expr2) + then + return False; + + -- If either expression raised a constraint error, + -- consider the expressions as matching, since this + -- helps to prevent cascading errors. + + elsif Raises_Constraint_Error (Expr1) + or else Raises_Constraint_Error (Expr2) + then + null; + + elsif Expr_Value (Expr1) /= Expr_Value (Expr2) then + return False; + end if; + end; + + Next_Elmt (DA1); + Next_Elmt (DA2); + end loop; + end; + + return True; + + -- A definite type does not match an indefinite or classwide type + -- However, a generic type with unknown discriminants may be + -- instantiated with a type with no discriminants, and conformance + -- checking on an inherited operation may compare the actual with + -- the subtype that renames it in the instance. + + elsif + Has_Unknown_Discriminants (T1) /= Has_Unknown_Discriminants (T2) + then + return + Is_Generic_Actual_Type (T1) or else Is_Generic_Actual_Type (T2); + + -- Array type + + elsif Is_Array_Type (T1) then + + -- If either subtype is unconstrained then both must be, + -- and if both are unconstrained then no further checking + -- is needed. + + if not Is_Constrained (T1) or else not Is_Constrained (T2) then + return not (Is_Constrained (T1) or else Is_Constrained (T2)); + end if; + + -- Both subtypes are constrained, so check that the index + -- subtypes statically match. + + declare + Index1 : Node_Id := First_Index (T1); + Index2 : Node_Id := First_Index (T2); + + begin + while Present (Index1) loop + if not + Subtypes_Statically_Match (Etype (Index1), Etype (Index2)) + then + return False; + end if; + + Next_Index (Index1); + Next_Index (Index2); + end loop; + + return True; + end; + + elsif Is_Access_Type (T1) then + if Can_Never_Be_Null (T1) /= Can_Never_Be_Null (T2) then + return False; + + elsif Ekind (T1) = E_Access_Subprogram_Type + or else Ekind (T1) = E_Anonymous_Access_Subprogram_Type + then + return + Subtype_Conformant + (Designated_Type (T1), + Designated_Type (T2)); + else + return + Subtypes_Statically_Match + (Designated_Type (T1), + Designated_Type (T2)) + and then Is_Access_Constant (T1) = Is_Access_Constant (T2); + end if; + + -- All other types definitely match + + else + return True; + end if; + end Subtypes_Statically_Match; + + ---------- + -- Test -- + ---------- + + function Test (Cond : Boolean) return Uint is + begin + if Cond then + return Uint_1; + else + return Uint_0; + end if; + end Test; + + --------------------------------- + -- Test_Expression_Is_Foldable -- + --------------------------------- + + -- One operand case + + procedure Test_Expression_Is_Foldable + (N : Node_Id; + Op1 : Node_Id; + Stat : out Boolean; + Fold : out Boolean) + is + begin + Stat := False; + Fold := False; + + if Debug_Flag_Dot_F and then In_Extended_Main_Source_Unit (N) then + return; + end if; + + -- If operand is Any_Type, just propagate to result and do not + -- try to fold, this prevents cascaded errors. + + if Etype (Op1) = Any_Type then + Set_Etype (N, Any_Type); + return; + + -- If operand raises constraint error, then replace node N with the + -- raise constraint error node, and we are obviously not foldable. + -- Note that this replacement inherits the Is_Static_Expression flag + -- from the operand. + + elsif Raises_Constraint_Error (Op1) then + Rewrite_In_Raise_CE (N, Op1); + return; + + -- If the operand is not static, then the result is not static, and + -- all we have to do is to check the operand since it is now known + -- to appear in a non-static context. + + elsif not Is_Static_Expression (Op1) then + Check_Non_Static_Context (Op1); + Fold := Compile_Time_Known_Value (Op1); + return; + + -- An expression of a formal modular type is not foldable because + -- the modulus is unknown. + + elsif Is_Modular_Integer_Type (Etype (Op1)) + and then Is_Generic_Type (Etype (Op1)) + then + Check_Non_Static_Context (Op1); + return; + + -- Here we have the case of an operand whose type is OK, which is + -- static, and which does not raise constraint error, we can fold. + + else + Set_Is_Static_Expression (N); + Fold := True; + Stat := True; + end if; + end Test_Expression_Is_Foldable; + + -- Two operand case + + procedure Test_Expression_Is_Foldable + (N : Node_Id; + Op1 : Node_Id; + Op2 : Node_Id; + Stat : out Boolean; + Fold : out Boolean) + is + Rstat : constant Boolean := Is_Static_Expression (Op1) + and then Is_Static_Expression (Op2); + + begin + Stat := False; + Fold := False; + + if Debug_Flag_Dot_F and then In_Extended_Main_Source_Unit (N) then + return; + end if; + + -- If either operand is Any_Type, just propagate to result and + -- do not try to fold, this prevents cascaded errors. + + if Etype (Op1) = Any_Type or else Etype (Op2) = Any_Type then + Set_Etype (N, Any_Type); + return; + + -- If left operand raises constraint error, then replace node N with + -- the raise constraint error node, and we are obviously not foldable. + -- Is_Static_Expression is set from the two operands in the normal way, + -- and we check the right operand if it is in a non-static context. + + elsif Raises_Constraint_Error (Op1) then + if not Rstat then + Check_Non_Static_Context (Op2); + end if; + + Rewrite_In_Raise_CE (N, Op1); + Set_Is_Static_Expression (N, Rstat); + return; + + -- Similar processing for the case of the right operand. Note that + -- we don't use this routine for the short-circuit case, so we do + -- not have to worry about that special case here. + + elsif Raises_Constraint_Error (Op2) then + if not Rstat then + Check_Non_Static_Context (Op1); + end if; + + Rewrite_In_Raise_CE (N, Op2); + Set_Is_Static_Expression (N, Rstat); + return; + + -- Exclude expressions of a generic modular type, as above + + elsif Is_Modular_Integer_Type (Etype (Op1)) + and then Is_Generic_Type (Etype (Op1)) + then + Check_Non_Static_Context (Op1); + return; + + -- If result is not static, then check non-static contexts on operands + -- since one of them may be static and the other one may not be static + + elsif not Rstat then + Check_Non_Static_Context (Op1); + Check_Non_Static_Context (Op2); + Fold := Compile_Time_Known_Value (Op1) + and then Compile_Time_Known_Value (Op2); + return; + + -- Else result is static and foldable. Both operands are static, + -- and neither raises constraint error, so we can definitely fold. + + else + Set_Is_Static_Expression (N); + Fold := True; + Stat := True; + return; + end if; + end Test_Expression_Is_Foldable; + + -------------- + -- To_Bits -- + -------------- + + procedure To_Bits (U : Uint; B : out Bits) is + begin + for J in 0 .. B'Last loop + B (J) := (U / (2 ** J)) mod 2 /= 0; + end loop; + end To_Bits; + + -------------------- + -- Why_Not_Static -- + -------------------- + + procedure Why_Not_Static (Expr : Node_Id) is + N : constant Node_Id := Original_Node (Expr); + Typ : Entity_Id; + E : Entity_Id; + + procedure Why_Not_Static_List (L : List_Id); + -- A version that can be called on a list of expressions. Finds + -- all non-static violations in any element of the list. + + ------------------------- + -- Why_Not_Static_List -- + ------------------------- + + procedure Why_Not_Static_List (L : List_Id) is + N : Node_Id; + + begin + if Is_Non_Empty_List (L) then + N := First (L); + while Present (N) loop + Why_Not_Static (N); + Next (N); + end loop; + end if; + end Why_Not_Static_List; + + -- Start of processing for Why_Not_Static + + begin + -- If in ACATS mode (debug flag 2), then suppress all these + -- messages, this avoids massive updates to the ACATS base line. + + if Debug_Flag_2 then + return; + end if; + + -- Ignore call on error or empty node + + if No (Expr) or else Nkind (Expr) = N_Error then + return; + end if; + + -- Preprocessing for sub expressions + + if Nkind (Expr) in N_Subexpr then + + -- Nothing to do if expression is static + + if Is_OK_Static_Expression (Expr) then + return; + end if; + + -- Test for constraint error raised + + if Raises_Constraint_Error (Expr) then + Error_Msg_N + ("expression raises exception, cannot be static " & + "('R'M 4.9(34))!", N); + return; + end if; + + -- If no type, then something is pretty wrong, so ignore + + Typ := Etype (Expr); + + if No (Typ) then + return; + end if; + + -- Type must be scalar or string type + + if not Is_Scalar_Type (Typ) + and then not Is_String_Type (Typ) + then + Error_Msg_N + ("static expression must have scalar or string type " & + "('R'M 4.9(2))!", N); + return; + end if; + end if; + + -- If we got through those checks, test particular node kind + + case Nkind (N) is + when N_Expanded_Name | N_Identifier | N_Operator_Symbol => + E := Entity (N); + + if Is_Named_Number (E) then + null; + + elsif Ekind (E) = E_Constant then + if not Is_Static_Expression (Constant_Value (E)) then + Error_Msg_NE + ("& is not a static constant ('R'M 4.9(5))!", N, E); + end if; + + else + Error_Msg_NE + ("& is not static constant or named number " & + "('R'M 4.9(5))!", N, E); + end if; + + when N_Binary_Op | N_And_Then | N_Or_Else | N_In | N_Not_In => + if Nkind (N) in N_Op_Shift then + Error_Msg_N + ("shift functions are never static ('R'M 4.9(6,18))!", N); + + else + Why_Not_Static (Left_Opnd (N)); + Why_Not_Static (Right_Opnd (N)); + end if; + + when N_Unary_Op => + Why_Not_Static (Right_Opnd (N)); + + when N_Attribute_Reference => + Why_Not_Static_List (Expressions (N)); + + E := Etype (Prefix (N)); + + if E = Standard_Void_Type then + return; + end if; + + -- Special case non-scalar'Size since this is a common error + + if Attribute_Name (N) = Name_Size then + Error_Msg_N + ("size attribute is only static for scalar type " & + "('R'M 4.9(7,8))", N); + + -- Flag array cases + + elsif Is_Array_Type (E) then + if Attribute_Name (N) /= Name_First + and then + Attribute_Name (N) /= Name_Last + and then + Attribute_Name (N) /= Name_Length + then + Error_Msg_N + ("static array attribute must be Length, First, or Last " & + "('R'M 4.9(8))!", N); + + -- Since we know the expression is not-static (we already + -- tested for this, must mean array is not static). + + else + Error_Msg_N + ("prefix is non-static array ('R'M 4.9(8))!", Prefix (N)); + end if; + + return; + + -- Special case generic types, since again this is a common + -- source of confusion. + + elsif Is_Generic_Actual_Type (E) + or else + Is_Generic_Type (E) + then + Error_Msg_N + ("attribute of generic type is never static " & + "('R'M 4.9(7,8))!", N); + + elsif Is_Static_Subtype (E) then + null; + + elsif Is_Scalar_Type (E) then + Error_Msg_N + ("prefix type for attribute is not static scalar subtype " & + "('R'M 4.9(7))!", N); + + else + Error_Msg_N + ("static attribute must apply to array/scalar type " & + "('R'M 4.9(7,8))!", N); + end if; + + when N_String_Literal => + Error_Msg_N + ("subtype of string literal is non-static ('R'M 4.9(4))!", N); + + when N_Explicit_Dereference => + Error_Msg_N + ("explicit dereference is never static ('R'M 4.9)!", N); + + when N_Function_Call => + Why_Not_Static_List (Parameter_Associations (N)); + Error_Msg_N ("non-static function call ('R'M 4.9(6,18))!", N); + + when N_Parameter_Association => + Why_Not_Static (Explicit_Actual_Parameter (N)); + + when N_Indexed_Component => + Error_Msg_N + ("indexed component is never static ('R'M 4.9)!", N); + + when N_Procedure_Call_Statement => + Error_Msg_N + ("procedure call is never static ('R'M 4.9)!", N); + + when N_Qualified_Expression => + Why_Not_Static (Expression (N)); + + when N_Aggregate | N_Extension_Aggregate => + Error_Msg_N + ("an aggregate is never static ('R'M 4.9)!", N); + + when N_Range => + Why_Not_Static (Low_Bound (N)); + Why_Not_Static (High_Bound (N)); + + when N_Range_Constraint => + Why_Not_Static (Range_Expression (N)); + + when N_Subtype_Indication => + Why_Not_Static (Constraint (N)); + + when N_Selected_Component => + Error_Msg_N + ("selected component is never static ('R'M 4.9)!", N); + + when N_Slice => + Error_Msg_N + ("slice is never static ('R'M 4.9)!", N); + + when N_Type_Conversion => + Why_Not_Static (Expression (N)); + + if not Is_Scalar_Type (Etype (Prefix (N))) + or else not Is_Static_Subtype (Etype (Prefix (N))) + then + Error_Msg_N + ("static conversion requires static scalar subtype result " & + "('R'M 4.9(9))!", N); + end if; + + when N_Unchecked_Type_Conversion => + Error_Msg_N + ("unchecked type conversion is never static ('R'M 4.9)!", N); + + when others => + null; + + end case; + end Why_Not_Static; + +end Sem_Eval; |