diff options
Diffstat (limited to 'gcc-4.2.1/config/acinclude.m4')
| -rw-r--r-- | gcc-4.2.1/config/acinclude.m4 | 2023 |
1 files changed, 0 insertions, 2023 deletions
diff --git a/gcc-4.2.1/config/acinclude.m4 b/gcc-4.2.1/config/acinclude.m4 deleted file mode 100644 index c7c0ab5dc..000000000 --- a/gcc-4.2.1/config/acinclude.m4 +++ /dev/null @@ -1,2023 +0,0 @@ -dnl This file is included into all any other acinclude file that needs -dnl to use these macros. - -dnl This is copied from autoconf 2.12, but does calls our own AC_PROG_CC_WORKS, -dnl and doesn't call AC_PROG_CXX_GNU, cause we test for that in AC_PROG_CC_WORKS. -dnl We are probably using a cross compiler, which will not be able to fully -dnl link an executable. This should really be fixed in autoconf itself. -dnl Find a working G++ cross compiler. This only works for the GNU C++ compiler. -AC_DEFUN([CYG_AC_PROG_CXX_CROSS], -[AC_BEFORE([$0], [AC_PROG_CXXCPP]) -AC_CHECK_PROGS(CXX, $CCC c++ g++ gcc CC cxx cc++, gcc) - -CYG_AC_PROG_GXX_WORKS - -if test $ac_cv_prog_gxx = yes; then - GXX=yes -dnl Check whether -g works, even if CXXFLAGS is set, in case the package -dnl plays around with CXXFLAGS (such as to build both debugging and -dnl normal versions of a library), tasteless as that idea is. - ac_test_CXXFLAGS="${CXXFLAGS+set}" - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS= - AC_PROG_CXX_G - if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS="$ac_save_CXXFLAGS" - elif test $ac_cv_prog_cxx_g = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-O2" - fi -else - GXX= - test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" -fi -]) - -dnl See if the G++ compiler we found works. -AC_DEFUN([CYG_AC_PROG_GXX_WORKS], -[AC_MSG_CHECKING([whether the G++ compiler ($CXX $CXXFLAGS $LDFLAGS) actually works]) -AC_LANG_SAVE -AC_LANG_CPLUSPLUS -dnl Try a test case. We only compile, because it's close to impossible -dnl to get a correct fully linked executable with a cross compiler. For -dnl most cross compilers, this test is bogus. For G++, we can use various -dnl other compile line options to get a decent idea that the cross compiler -dnl actually does work, even though we can't produce an executable without -dnl more info about the target it's being compiled for. This only works -dnl for the GNU C++ compiler. - -dnl Transform the name of the compiler to it's cross variant, unless -dnl CXX is set. This is also what CXX gets set to in the generated -dnl Makefile. -if test x"${CXX}" = xc++ ; then - CXX=`echo gcc | sed -e "${program_transform_name}"` -fi - -dnl Get G++'s full path to libgcc.a -libgccpath=`${CXX} --print-libgcc` - -dnl If we don't have a path with libgcc.a on the end, this isn't G++. -if test `echo $libgccpath | sed -e 's:/.*/::'` = libgcc.a ; then - ac_cv_prog_gxx=yes -else - ac_cv_prog_gxx=no -fi - -dnl If we are using G++, look for the files that need to exist if this -dnl compiler works. -if test x"${ac_cv_prog_gxx}" = xyes ; then - gccfiles=`echo $libgccpath | sed -e 's:/libgcc.a::'` - if test -f ${gccfiles}/specs -a -f ${gccfiles}/cpp -a -f ${gccfiles}/cc1plus; then - gccfiles=yes - else - gccfiles=no - fi - gcclibs=`echo $libgccpath | sed -e 's:lib/gcc-lib/::' -e 's:/libgcc.a::' -e 's,\(.*\)/.*,\1,g'`/lib - if test -d ${gcclibs}/ldscripts -a -f ${gcclibs}/libc.a -a -f ${gcclibs}/libstdc++.a ; then - gcclibs=yes - else - gcclibs=no - fi -fi - -dnl If everything is OK, then we can safely assume the compiler works. -if test x"${gccfiles}" = xno -o x"${gcclibs}" = xno; then - ac_cv_prog_cxx_works=no - AC_MSG_ERROR(${CXX} is a non-working cross compiler) -else - ac_cv_prog_cxx_works=yes -fi - -AC_LANG_RESTORE -AC_MSG_RESULT($ac_cv_prog_cxx_works) -if test x"$ac_cv_prog_cxx_works" = xno; then - AC_MSG_ERROR([installation or configuration problem: C++ compiler cannot create executables.]) -fi -AC_MSG_CHECKING([whether the G++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler]) -AC_MSG_RESULT($ac_cv_prog_cxx_cross) -cross_compiling=$ac_cv_prog_cxx_cross -AC_SUBST(CXX) -]) - -dnl ==================================================================== -dnl Find a working GCC cross compiler. This only works for the GNU gcc compiler. -dnl This is based on the macros above for G++. -AC_DEFUN([CYG_AC_PROG_CC_CROSS], -[AC_BEFORE([$0], [AC_PROG_CCPP]) -AC_CHECK_PROGS(CC, cc, gcc) - -CYG_AC_PROG_GCC_WORKS - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -dnl Check whether -g works, even if CFLAGS is set, in case the package -dnl plays around with CFLAGS (such as to build both debugging and -dnl normal versions of a library), tasteless as that idea is. - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - AC_PROG_CC_G - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GXX= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi -]) - -dnl See if the GCC compiler we found works. -AC_DEFUN([CYG_AC_PROG_GCC_WORKS], -[AC_MSG_CHECKING([whether the Gcc compiler ($CC $CFLAGS $LDFLAGS) actually works]) -AC_LANG_SAVE -AC_LANG_C -dnl Try a test case. We only compile, because it's close to impossible -dnl to get a correct fully linked executable with a cross -dnl compiler. For most cross compilers, this test is bogus. For G++, -dnl we can use various other compile line options to get a decent idea -dnl that the cross compiler actually does work, even though we can't -dnl produce an executable without more info about the target it's -dnl being compiled for. This only works for the GNU C++ compiler. - -dnl Transform the name of the compiler to it's cross variant, unless -dnl CXX is set. This is also what CC gets set to in the generated Makefile. -if test x"${CC}" = xcc ; then - CC=`echo gcc | sed -e "${program_transform_name}"` -fi - -dnl Get Gcc's full path to libgcc.a -libgccpath=`${CC} --print-libgcc` - -dnl If we don't have a path with libgcc.a on the end, this isn't G++. -if test `echo $libgccpath | sed -e 's:/.*/::'` = libgcc.a ; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi - -dnl If we are using Gcc, look for the files that need to exist if this -dnl compiler works. -if test x"${ac_cv_prog_gcc}" = xyes ; then - gccfiles=`echo $libgccpath | sed -e 's:/libgcc.a::'` - if test -f ${gccfiles}/specs -a -f ${gccfiles}/cpp -a -f ${gccfiles}/cc1plus; then - gccfiles=yes - else - gccfiles=no - fi - gcclibs=`echo $libgccpath | sed -e 's:lib/gcc-lib/::' -e 's:/libgcc.a::' -e 's,\(.*\)/.*,\1,g'`/lib - if test -d ${gcclibs}/ldscripts -a -f ${gcclibs}/libc.a -a -f ${gcclibs}/libstdc++.a ; then - gcclibs=yes - else - gcclibs=no - fi -fi - -dnl If everything is OK, then we can safely assume the compiler works. -if test x"${gccfiles}" = xno -o x"${gcclibs}" = xno; then - ac_cv_prog_cc_works=no - AC_MSG_ERROR(${CC} is a non-working cross compiler) -else - ac_cv_prog_cc_works=yes -fi - -AC_LANG_RESTORE -AC_MSG_RESULT($ac_cv_prog_cc_works) -if test x"$ac_cv_prog_cc_works" = xno; then - AC_MSG_ERROR([installation or configuration problem: C++ compiler cannot create executables.]) -fi -AC_MSG_CHECKING([whether the Gcc compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler]) -AC_MSG_RESULT($ac_cv_prog_cc_cross) -cross_compiling=$ac_cv_prog_cc_cross -AC_SUBST(CC) -]) - -dnl ==================================================================== -dnl Find the BFD library in the build tree. This is used to access and -dnl manipulate object or executable files. -AC_DEFUN([CYG_AC_PATH_BFD], [ -AC_MSG_CHECKING(for the bfd header in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -dnl Look for the header file -AC_CACHE_VAL(ac_cv_c_bfdh,[ -for i in $dirlist; do - if test -f "$i/bfd/bfd.h" ; then - ac_cv_c_bfdh=`(cd $i/bfd; ${PWDCMD-pwd})` - break - fi -done -]) -if test x"${ac_cv_c_bfdh}" != x; then - BFDHDIR="-I${ac_cv_c_bfdh}" - AC_MSG_RESULT(${ac_cv_c_bfdh}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(BFDHDIR) - -dnl Look for the library -AC_MSG_CHECKING(for the bfd library in the build tree) -AC_CACHE_VAL(ac_cv_c_bfdlib,[ -for i in $dirlist; do - if test -f "$i/bfd/Makefile" ; then - ac_cv_c_bfdlib=`(cd $i/bfd; ${PWDCMD-pwd})` - fi -done -]) -dnl We list two directories cause bfd now uses libtool -if test x"${ac_cv_c_bfdlib}" != x; then - BFDLIB="-L${ac_cv_c_bfdlib} -L${ac_cv_c_bfdlib}/.libs" - AC_MSG_RESULT(${ac_cv_c_bfdlib}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(BFDLIB) -]) - -dnl ==================================================================== -dnl Find the libiberty library. This defines many commonly used C -dnl functions that exists in various states based on the underlying OS. -AC_DEFUN([CYG_AC_PATH_LIBERTY], [ -AC_MSG_CHECKING(for the liberty library in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_liberty,[ -for i in $dirlist; do - if test -f "$i/libiberty/Makefile" ; then - ac_cv_c_liberty=`(cd $i/libiberty; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_liberty}" != x; then - LIBERTY="-L${ac_cv_c_liberty}" - AC_MSG_RESULT(${ac_cv_c_liberty}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(LIBERTY) -]) - -dnl ==================================================================== -dnl Find the opcodes library. This is used to do dissasemblies. -AC_DEFUN([CYG_AC_PATH_OPCODES], [ -AC_MSG_CHECKING(for the opcodes library in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_opc,[ -for i in $dirlist; do - if test -f "$i/opcodes/Makefile" ; then - ac_cv_c_opc=`(cd $i/opcodes; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_opc}" != x; then - OPCODESLIB="-L${ac_cv_c_opc}" - AC_MSG_RESULT(${ac_cv_c_opc}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(OPCODESLIB) -]) - -dnl ==================================================================== -dnl Look for the DejaGnu header file in the source tree. This file -dnl defines the functions used to testing support. -AC_DEFUN([CYG_AC_PATH_DEJAGNU], [ -AC_MSG_CHECKING(for the testing support files in the source tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_dejagnu,[ -for i in $dirlist; do - if test -f "$srcdir/$i/ecc/ecc/infra/testlib/current/include/dejagnu.h" ; then - ac_cv_c_dejagnu=`(cd $srcdir/$i/ecc/ecc/infra/testlib/current/include; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_dejagnu}" != x; then - DEJAGNUHDIR="-I${ac_cv_c_dejagnu}" - AC_MSG_RESULT(${ac_cv_c_dejagnu}) -else - AC_MSG_RESULT(none) -fi -AC_CACHE_VAL(ac_cv_c_dejagnulib,[ -for i in $dirlist; do - if test -f "$srcdir/$i/infra/testlib/current/lib/hostutil.exp" ; then - ac_cv_c_dejagnulib=`(cd $srcdir/$i/infra/testlib/current/lib; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_dejagnulib}" != x; then - DEJAGNULIB="${ac_cv_c_dejagnulib}" -else - DEJAGNULIB="" -fi -AC_MSG_CHECKING(for runtest in the source tree) -AC_CACHE_VAL(ac_cv_c_runtest,[ -for i in $dirlist; do - if test -f "$srcdir/$i/dejagnu/runtest" ; then - ac_cv_c_runtest=`(cd $srcdir/$i/dejagnu; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_runtest}" != x; then - RUNTESTDIR="${ac_cv_c_runtest}" - AC_MSG_RESULT(${ac_cv_c_runtest}) -else - RUNTESTDIR="" - AC_MSG_RESULT(none) -fi -AC_SUBST(RUNTESTDIR) -AC_SUBST(DEJAGNULIB) -AC_SUBST(DEJAGNUHDIR) -]) - -dnl ==================================================================== -dnl Find the libintl library in the build tree. This is for -dnl internationalization support. -AC_DEFUN([CYG_AC_PATH_INTL], [ -AC_MSG_CHECKING(for the intl header in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -dnl Look for the header file -AC_CACHE_VAL(ac_cv_c_intlh,[ -for i in $dirlist; do - if test -f "$i/intl/libintl.h" ; then - ac_cv_c_intlh=`(cd $i/intl; ${PWDCMD-pwd})` - break - fi -done -]) -if test x"${ac_cv_c_intlh}" != x; then - INTLHDIR="-I${ac_cv_c_intlh}" - AC_MSG_RESULT(${ac_cv_c_intlh}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(INTLHDIR) - -dnl Look for the library -AC_MSG_CHECKING(for the libintl library in the build tree) -AC_CACHE_VAL(ac_cv_c_intllib,[ -for i in $dirlist; do - if test -f "$i/intl/Makefile" ; then - ac_cv_c_intllib=`(cd $i/intl; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_intllib}" != x; then - INTLLIB="-L${ac_cv_c_intllib} -lintl" - AC_MSG_RESULT(${ac_cv_c_intllib}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(INTLLIB) -]) - -dnl ==================================================================== -dnl Find the simulator library. -AC_DEFUN([CYG_AC_PATH_SIM], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.. ../../../../../../../../../.." -case "$target_cpu" in - powerpc) target_dir=ppc ;; - sparc*) target_dir=erc32 ;; - mips*) target_dir=mips ;; - *) target_dir=$target_cpu ;; -esac -dnl First look for the header file -AC_MSG_CHECKING(for the simulator header file) -AC_CACHE_VAL(ac_cv_c_simh,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/include/remote-sim.h" ; then - ac_cv_c_simh=`(cd ${srcdir}/$i/include; ${PWDCMD-pwd})` - break - fi -done -]) -if test x"${ac_cv_c_simh}" != x; then - SIMHDIR="-I${ac_cv_c_simh}" - AC_MSG_RESULT(${ac_cv_c_simh}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(SIMHDIR) - -dnl See whether it's a devo or Foundry branch simulator -AC_MSG_CHECKING(Whether this is a devo simulator ) -AC_CACHE_VAL(ac_cv_c_simdevo,[ - CPPFLAGS="$CPPFLAGS $SIMHDIR" - AC_EGREP_HEADER([SIM_DESC sim_open.*struct _bfd], remote-sim.h, - ac_cv_c_simdevo=yes, - ac_cv_c_simdevo=no) -]) -if test x"$ac_cv_c_simdevo" = x"yes" ; then - AC_DEFINE(HAVE_DEVO_SIM) -fi -AC_MSG_RESULT(${ac_cv_c_simdevo}) -AC_SUBST(HAVE_DEVO_SIM) - -dnl Next look for the library -AC_MSG_CHECKING(for the simulator library) -AC_CACHE_VAL(ac_cv_c_simlib,[ -for i in $dirlist; do - if test -f "$i/sim/$target_dir/Makefile" ; then - ac_cv_c_simlib=`(cd $i/sim/$target_dir; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_simlib}" != x; then - SIMLIB="-L${ac_cv_c_simlib}" -else - AC_MSG_RESULT(none) - dnl FIXME: this is kinda bogus, cause umtimately the TM will build - dnl all the libraries for several architectures. But for now, this - dnl will work till then. -dnl AC_MSG_CHECKING(for the simulator installed with the compiler libraries) - dnl Transform the name of the compiler to it's cross variant, unless - dnl CXX is set. This is also what CXX gets set to in the generated - dnl Makefile. - CROSS_GCC=`echo gcc | sed -e "s/^/$target/"` - - dnl Get G++'s full path to libgcc.a -changequote(,) - gccpath=`${CROSS_GCC} --print-libgcc | sed -e 's:[a-z0-9A-Z\.\-]*/libgcc.a::' -e 's:lib/gcc-lib/::'`lib -changequote([,]) - if test -f $gccpath/libsim.a -o -f $gccpath/libsim.so ; then - ac_cv_c_simlib="$gccpath/" - SIMLIB="-L${ac_cv_c_simlib}" - AC_MSG_RESULT(${ac_cv_c_simlib}) - else - AM_CONDITIONAL(PSIM, test x$psim = xno) - SIMLIB="" - AC_MSG_RESULT(none) -dnl ac_cv_c_simlib=none - fi -fi -AC_SUBST(SIMLIB) -]) - -dnl ==================================================================== -dnl Find the libiberty library. -AC_DEFUN([CYG_AC_PATH_LIBIBERTY], [ -AC_MSG_CHECKING(for the libiberty library in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_libib,[ -for i in $dirlist; do - if test -f "$i/libiberty/Makefile" ; then - ac_cv_c_libib=`(cd $i/libiberty/; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_libib}" != x; then - LIBIBERTY="-L${ac_cv_c_libib}" - AC_MSG_RESULT(${ac_cv_c_libib}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(LIBIBERTY) -]) - -dnl ==================================================================== -AC_DEFUN([CYG_AC_PATH_DEVO], [ -AC_MSG_CHECKING(for devo headers in the source tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_devoh,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/include/remote-sim.h" ; then - ac_cv_c_devoh=`(cd ${srcdir}/$i/include; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_devoh}" != x; then - DEVOHDIR="-I${ac_cv_c_devoh}" - AC_MSG_RESULT(${ac_cv_c_devoh}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(DEVOHDIR) -]) - -dnl ==================================================================== -dnl find the IDE library and headers. -AC_DEFUN([CYG_AC_PATH_IDE], [ -AC_MSG_CHECKING(for IDE headers in the source tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -IDEHDIR= -IDELIB= -AC_CACHE_VAL(ac_cv_c_ideh,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/libide/src/event.h" ; then - ac_cv_c_ideh=`(cd ${srcdir}/$i/libide/src; ${PWDCMD-pwd})`; - fi -done -]) -if test x"${ac_cv_c_ideh}" != x; then - IDEHDIR="-I${ac_cv_c_ideh}" - AC_MSG_RESULT(${ac_cv_c_ideh}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for LIBIDE TCL headers in the source tree) -AC_CACHE_VAL(ac_cv_c_idetclh,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/libidetcl/src/idetcl.h" ; then - ac_cv_c_idetclh=`(cd ${srcdir}/$i/libidetcl/src; ${PWDCMD-pwd})`; - fi -done -]) -if test x"${ac_cv_c_idetclh}" != x; then - IDEHDIR="${IDEHDIR} -I${ac_cv_c_idetclh}" - AC_MSG_RESULT(${ac_cv_c_idetclh}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for IDE headers in the build tree) -AC_CACHE_VAL(ac_cv_c_ideh2,[ -for i in $dirlist; do - if test -f "$i/libide/src/Makefile" ; then - ac_cv_c_ideh2=`(cd $i/libide/src; ${PWDCMD-pwd})`; - fi -done -]) -if test x"${ac_cv_c_ideh2}" != x; then - IDEHDIR="${IDEHDIR} -I${ac_cv_c_ideh2}" - AC_MSG_RESULT(${ac_cv_c_ideh2}) -else - AC_MSG_RESULT(none) -fi - -dnl look for the library -AC_MSG_CHECKING(for IDE library) -AC_CACHE_VAL(ac_cv_c_idelib,[ -if test x"${ac_cv_c_idelib}" = x ; then - for i in $dirlist; do - if test -f "$i/libide/src/Makefile" ; then - ac_cv_c_idelib=`(cd $i/libide/src; ${PWDCMD-pwd})` - break - fi - done -fi]) -if test x"${ac_cv_c_idelib}" != x ; then - IDELIB="-L${ac_cv_c_idelib}" - AC_MSG_RESULT(${ac_cv_c_idelib}) -else - AC_MSG_RESULT(none) -fi - -dnl find libiddetcl.a if it exists -AC_MSG_CHECKING(for IDE TCL library) -AC_CACHE_VAL(ac_cv_c_idetcllib,[ -if test x"${ac_cv_c_idetcllib}" = x ; then - for i in $dirlist; do - if test -f "$i/libidetcl/src/Makefile" ; then - ac_cv_c_idetcllib=`(cd $i/libidetcl/src; ${PWDCMD-pwd})` - break - fi - done -fi -]) -if test x"${ac_cv_c_idetcllib}" != x ; then - IDELIB="${IDELIB} -L${ac_cv_c_idetcllib}" - IDETCLLIB="-lidetcl" - AC_MSG_RESULT(${ac_cv_c_idetcllib}) -else - AC_MSG_RESULT(none) -fi -AC_SUBST(IDEHDIR) -AC_SUBST(IDELIB) -AC_SUBST(IDETCLLIB) -]) - -dnl ==================================================================== -dnl Find all the ILU headers and libraries -AC_DEFUN([CYG_AC_PATH_ILU], [ -AC_MSG_CHECKING(for ILU kernel headers in the source tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_iluh,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/ilu/runtime/kernel/method.h" ; then - ac_cv_c_iluh=`(cd ${srcdir}/$i/ilu/runtime/kernel; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_iluh}" != x; then - ILUHDIR="-I${ac_cv_c_iluh}" - AC_MSG_RESULT(${ac_cv_c_iluh}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for ILU kernel headers in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -AC_CACHE_VAL(ac_cv_c_iluh5,[ -for i in $dirlist; do - if test -f "$i/ilu/runtime/kernel/iluconf.h" ; then - ac_cv_c_iluh5=`(cd $i/ilu/runtime/kernel; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_iluh5}" != x; then - ILUHDIR="${ILUHDIR} -I${ac_cv_c_iluh5}" - AC_MSG_RESULT(${ac_cv_c_iluh5}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for ILU C++ headers in the source tree) -AC_CACHE_VAL(ac_cv_c_iluh2,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/ilu/stubbers/cpp/resource.h" ; then - ac_cv_c_iluh2=`(cd ${srcdir}/$i/ilu/stubbers/cpp; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_iluh2}" != x; then - ILUHDIR="${ILUHDIR} -I${ac_cv_c_iluh2}" - AC_MSG_RESULT(${ac_cv_c_iluh2}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for ILU C headers) -AC_CACHE_VAL(ac_cv_c_iluh3,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/ilu/stubbers/c/resource.h" ; then - ac_cv_c_iluh3=`(cd ${srcdir}/$i/ilu/stubbers/c ; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_iluh3}" != x; then - ILUHDIR="${ILUHDIR} -I${ac_cv_c_iluh3}" - AC_MSG_RESULT(${ac_cv_c_iluh3}) -else - AC_MSG_RESULT(none) -fi - -AC_MSG_CHECKING(for ILU C runtime headers) -AC_CACHE_VAL(ac_cv_c_iluh4,[ -for i in $dirlist; do - if test -f "${srcdir}/$i/ilu/runtime/c/ilucstub.h" ; then - ac_cv_c_iluh4=`(cd ${srcdir}/$i/ilu/runtime/c ; ${PWDCMD-pwd})` - fi -done -]) -if test x"${ac_cv_c_iluh4}" != x; then - ILUHDIR="${ILUHDIR} -I${ac_cv_c_iluh4}" - AC_MSG_RESULT(${ac_cv_c_iluh4}) -else - AC_MSG_RESULT(none) -fi - -AC_CACHE_VAL(ac_cv_c_ilupath,[ -for i in $dirlist; do - if test -f "$i/ilu/Makefile" ; then - ac_cv_c_ilupath=`(cd $i/ilu; ${PWDCMD-pwd})` - break - fi -done -]) -ILUTOP=${ac_cv_c_ilupath} - -AC_MSG_CHECKING(for the ILU library in the build tree) -AC_CACHE_VAL(ac_cv_c_ilulib,[ -if test -f "$ac_cv_c_ilupath/runtime/kernel/Makefile" ; then - ac_cv_c_ilulib=`(cd $ac_cv_c_ilupath/runtime/kernel; ${PWDCMD-pwd})` - AC_MSG_RESULT(found ${ac_cv_c_ilulib}/libilu.a) -else - AC_MSG_RESULT(no) -fi]) - -AC_MSG_CHECKING(for the ILU C++ bindings library in the build tree) -AC_CACHE_VAL(ac_cv_c_ilulib2,[ -if test -f "$ac_cv_c_ilupath/runtime/cpp/Makefile" ; then - ac_cv_c_ilulib2=`(cd $ac_cv_c_ilupath/runtime/cpp; ${PWDCMD-pwd})` - AC_MSG_RESULT(found ${ac_cv_c_ilulib2}/libilu-c++.a) -else - AC_MSG_RESULT(no) -fi]) - -AC_MSG_CHECKING(for the ILU C bindings library in the build tree) -AC_CACHE_VAL(ac_cv_c_ilulib3,[ -if test -f "$ac_cv_c_ilupath/runtime/c/Makefile" ; then - ac_cv_c_ilulib3=`(cd $ac_cv_c_ilupath/runtime/c; ${PWDCMD-pwd})` - AC_MSG_RESULT(found ${ac_cv_c_ilulib3}/libilu-c.a) -else - AC_MSG_RESULT(no) -fi]) - -AC_MSG_CHECKING(for the ILU Tk bindings library in the build tree) -AC_CACHE_VAL(ac_cv_c_ilulib4,[ -if test -f "$ac_cv_c_ilupath/runtime/mainloop/Makefile" ; then - ac_cv_c_ilulib4=`(cd $ac_cv_c_ilupath/runtime/mainloop; ${PWDCMD-pwd})` - AC_MSG_RESULT(found ${ac_cv_c_ilulib4}/libilu-tk.a) -else - AC_MSG_RESULT(no) -fi]) - -if test x"${ac_cv_c_ilulib}" = x -a x"${ac_cv_c_ilulib2}" = x; then - ILUHDIR="" -fi - -if test x"${ac_cv_c_ilulib}" != x -a x"${ac_cv_c_ilulib2}" != x; then - ILULIB="-L${ac_cv_c_ilulib} -L${ac_cv_c_ilulib2} -L${ac_cv_c_ilulib3} -L${ac_cv_c_ilulib4}" -else - ILULIB="" -fi - -if test x"${ILULIB}" = x; then - AC_MSG_CHECKING(for ILU libraries installed with the compiler) - AC_CACHE_VAL(ac_cv_c_ilulib5,[ - NATIVE_GCC=`echo gcc | sed -e "${program_transform_name}"` - - dnl Get G++'s full path to it's libraries - ac_cv_c_ilulib5=`${NATIVE_GCC} --print-libgcc | sed -e 's:lib/gcc-lib/.*::'`lib - if test -f $ac_cv_c_ilulib5/libilu-c.a -o -f $ac_cv_c_ilulib5/libilu-c.so ; then - if test x"${ILUHDIR}" = x; then - ILUHDIR="-I${ac_cv_c_ilulib5}/../include" - fi - ILULIB="-L${ac_cv_c_ilulib5}" - AC_MSG_RESULT(${ac_cv_c_ilulib5}) - else - ac_cv_c_ilulib=none - AC_MSG_RESULT(none) - fi -fi]) -AC_SUBST(ILUHDIR) -AC_SUBST(ILULIB) -AC_SUBST(ILUTOP) -]) - -dnl ==================================================================== -dnl This defines the byte order for the host. We can't use -dnl AC_C_BIGENDIAN, cause we want to create a config file and -dnl substitue the real value, so the header files work right -AC_DEFUN([CYG_AC_C_ENDIAN], [ -AC_MSG_CHECKING(to see if this is a little endian host) -AC_CACHE_VAL(ac_cv_c_little_endian, [ -ac_cv_c_little_endian=unknown -# See if sys/param.h defines the BYTE_ORDER macro. -AC_TRY_COMPILE([#include <sys/types.h> -#include <sys/param.h>], [ -#if !BYTE_ORDER || !_BIG_ENDIAN || !_LITTLE_ENDIAN - bogus endian macros -#endif], [# It does; now see whether it defined to _LITTLE_ENDIAN or not. -AC_TRY_COMPILE([#include <sys/types.h> -#include <sys/param.h>], [ -#if BYTE_ORDER != _LITTLE_ENDIAN - not big endian -#endif], ac_cv_c_little_endian=yes, ac_cv_c_little_endian=no) -]) -if test ${ac_cv_c_little_endian} = unknown; then -old_cflags=$CFLAGS -CFLAGS=-g -AC_TRY_RUN([ -main () { - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long l; - char c[sizeof (long)]; - } u; - u.l = 1; - exit (u.c[0] == 1); -}], -ac_cv_c_little_endian=no, -ac_cv_c_little_endian=yes,[ -dnl Yes, this is ugly, and only used for a canadian cross anyway. This -dnl is just to keep configure from stopping here. -case "${host}" in -changequote(,) - i[3456789]86-*-*) ac_cv_c_little_endian=yes ;; - sparc*-*-*) ac_cv_c_little_endian=no ;; -changequote([,]) - *) AC_MSG_WARN(Can't cross compile this test) ;; -esac]) -CFLAGS=$old_cflags -fi]) - -if test x"${ac_cv_c_little_endian}" = xyes; then - AC_DEFINE(LITTLE_ENDIAN_HOST) - ENDIAN="CYG_LSBFIRST"; -else - ENDIAN="CYG_MSBFIRST"; -fi -AC_MSG_RESULT(${ac_cv_c_little_endian}) -AC_SUBST(ENDIAN) -]) - -dnl ==================================================================== -dnl Look for the path to libgcc, so we can use it to directly link -dnl in libgcc.a with LD. -AC_DEFUN([CYG_AC_PATH_LIBGCC], -[AC_MSG_CHECKING([Looking for the path to libgcc.a]) -AC_LANG_SAVE -AC_LANG_C - -dnl Get Gcc's full path to libgcc.a -libgccpath=`${CC} --print-libgcc` - -dnl If we don't have a path with libgcc.a on the end, this isn't G++. -if test `echo $libgccpath | sed -e 's:/.*/::'` = libgcc.a ; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi - -dnl -if test x"${ac_cv_prog_gcc}" = xyes ; then - gccpath=`echo $libgccpath | sed -e 's:/libgcc.a::'` - LIBGCC="-L${gccpath}" - AC_MSG_RESULT(${gccpath}) -else - LIBGCC="" - AC_MSG_ERROR(Not using gcc) -fi - -AC_LANG_RESTORE -AC_SUBST(LIBGCC) -]) - -dnl ==================================================================== -dnl Ok, lets find the tcl source trees so we can use the headers -dnl Warning: transition of version 9 to 10 will break this algorithm -dnl because 10 sorts before 9. We also look for just tcl. We have to -dnl be careful that we don't match stuff like tclX by accident. -dnl the alternative search directory is involked by --with-tclinclude -AC_DEFUN([CYG_AC_PATH_TCL], [ - CYG_AC_PATH_TCLH - CYG_AC_PATH_TCLCONFIG - CYG_AC_LOAD_TCLCONFIG -]) -AC_DEFUN([CYG_AC_PATH_TCLH], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_tcl=true -AC_MSG_CHECKING(for Tcl headers in the source tree) -AC_ARG_WITH(tclinclude, [ --with-tclinclude directory where tcl headers are], with_tclinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_tclh,[ -dnl first check to see if --with-tclinclude was specified -if test x"${with_tclinclude}" != x ; then - if test -f ${with_tclinclude}/tcl.h ; then - ac_cv_c_tclh=`(cd ${with_tclinclude}; ${PWDCMD-pwd})` - elif test -f ${with_tclinclude}/generic/tcl.h ; then - ac_cv_c_tclh=`(cd ${with_tclinclude}/generic; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tclinclude} directory doesn't contain headers]) - fi -fi - -dnl next check if it came with Tcl configuration file -if test x"${ac_cv_c_tclconfig}" != x ; then - for i in $dirlist; do - if test -f $ac_cv_c_tclconfig/$i/generic/tcl.h ; then - ac_cv_c_tclh=`(cd $ac_cv_c_tclconfig/$i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_tclh}" = x ; then - dnl find the top level Tcl source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/tcl* 2>/dev/null`" ; then - tclpath=$srcdir/$i - break - fi - done - - dnl find the exact Tcl source dir. We do it this way, cause there - dnl might be multiple version of Tcl, and we want the most recent one. - for i in `ls -dr $tclpath/tcl* 2>/dev/null ` ; do - if test -f $i/generic/tcl.h ; then - ac_cv_c_tclh=`(cd $i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl check if its installed with the compiler -if test x"${ac_cv_c_tclh}" = x ; then - dnl Get the path to the compiler - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/include - if test -f $ccpath/tcl.h; then - ac_cv_c_tclh=$ccpath - fi -fi - -dnl see if one is installed -if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_RESULT(none) - AC_CHECK_HEADER(tcl.h, ac_cv_c_tclh=installed, ac_cv_c_tclh="") -else - AC_MSG_RESULT(${ac_cv_c_tclh}) -fi -]) - TCLHDIR="" -if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_ERROR([Can't find any Tcl headers]) -fi -if test x"${ac_cv_c_tclh}" != x ; then - no_tcl="" - if test x"${ac_cv_c_tclh}" != x"installed" ; then - if test x"${CC}" = xcl ; then - tmp="`cygpath --windows ${ac_cv_c_tclh}`" - ac_cv_c_tclh="`echo $tmp | sed -e s#\\\\\\\\#/#g`" - fi - AC_MSG_RESULT(${ac_cv_c_tclh}) - TCLHDIR="-I${ac_cv_c_tclh}" - fi -fi - -AC_SUBST(TCLHDIR) -]) - -dnl ==================================================================== -dnl Ok, lets find the tcl configuration -AC_DEFUN([CYG_AC_PATH_TCLCONFIG], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -dnl First, look for one uninstalled. -dnl the alternative search directory is invoked by --with-tclconfig -if test x"${no_tcl}" = x ; then - dnl we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tclconfig, [ --with-tclconfig directory containing tcl configuration (tclConfig.sh)], - with_tclconfig=${withval}) - AC_MSG_CHECKING([for Tcl configuration script]) - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - dnl First check to see if --with-tclconfig was specified. - if test x"${with_tclconfig}" != x ; then - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd ${with_tclconfig}; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - dnl next check if it came with Tcl configuration file in the source tree - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in $dirlist; do - dnl need to test both unix and win directories, since - dnl cygwin's tkConfig.sh could be in either directory depending - dnl on the cygwin port of tcl. - if test -f $srcdir/$i/unix/tclConfig.sh ; then - ac_cv_c_tclconfig=`(cd $srcdir/$i/unix; ${PWDCMD-pwd})` - break - fi - if test -f $srcdir/$i/win/tclConfig.sh ; then - ac_cv_c_tclconfig=`(cd $srcdir/$i/win; ${PWDCMD-pwd})` - break - fi - done - fi - dnl check in a few other locations - if test x"${ac_cv_c_tclconfig}" = x ; then - dnl find the top level Tcl source directory - for i in $dirlist; do - if test -n "`ls -dr $i/tcl* 2>/dev/null`" ; then - tclconfpath=$i - break - fi - done - - dnl find the exact Tcl dir. We do it this way, cause there - dnl might be multiple version of Tcl, and we want the most recent one. - for i in `ls -dr $tclconfpath/tcl* 2>/dev/null ` ; do - dnl need to test both unix and win directories, since - dnl cygwin's tclConfig.sh could be in either directory depending - dnl on the cygwin port of tcl. - if test -f $i/unix/tclConfig.sh ; then - ac_cv_c_tclconfig=`(cd $i/unix; ${PWDCMD-pwd})` - break - fi - if test -f $i/win/tclConfig.sh ; then - ac_cv_c_tclconfig=`(cd $i/win; ${PWDCMD-pwd})` - break - fi - done - fi - - dnl Check to see if it's installed. We have to look in the $CC path - dnl to find it, cause our $prefix may not match the compilers. - if test x"${ac_cv_c_tclconfig}" = x ; then - dnl Get the path to the compiler - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/lib - if test -f $ccpath/tclConfig.sh; then - ac_cv_c_tclconfig=$ccpath - fi - fi - ]) dnl end of cache_val - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCLCONFIG="" - AC_MSG_WARN(Can't find Tcl configuration definitions) - else - no_tcl="" - TCLCONFIG=${ac_cv_c_tclconfig}/tclConfig.sh - AC_MSG_RESULT(${TCLCONFIG}) - fi -fi -AC_SUBST(TCLCONFIG) -]) - -dnl Defined as a separate macro so we don't have to cache the values -dnl from PATH_TCLCONFIG (because this can also be cached). -AC_DEFUN([CYG_AC_LOAD_TCLCONFIG], [ - . $TCLCONFIG - -dnl AC_SUBST(TCL_VERSION) -dnl AC_SUBST(TCL_MAJOR_VERSION) -dnl AC_SUBST(TCL_MINOR_VERSION) -dnl AC_SUBST(TCL_CC) - AC_SUBST(TCL_DEFS) - -dnl not used, don't export to save symbols - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIB_FULL_PATH) - AC_SUBST(TCL_LIBS) -dnl not used, don't export to save symbols -dnl AC_SUBST(TCL_PREFIX) - - AC_SUBST(TCL_CFLAGS) - -dnl not used, don't export to save symbols -dnl AC_SUBST(TCL_EXEC_PREFIX) - - AC_SUBST(TCL_SHLIB_CFLAGS) - AC_SUBST(TCL_SHLIB_LD) -dnl don't export, not used outside of configure -dnl AC_SUBST(TCL_SHLIB_LD_LIBS) -dnl AC_SUBST(TCL_SHLIB_SUFFIX) -dnl not used, don't export to save symbols -dnl AC_SUBST(TCL_DL_LIBS) - AC_SUBST(TCL_LD_FLAGS) - AC_SUBST(TCL_LD_SEARCH_FLAGS) -dnl don't export, not used outside of configure -dnl AC_SUBST(TCL_COMPAT_OBJS) - AC_SUBST(TCL_RANLIB) - AC_SUBST(TCL_BUILD_LIB_SPEC) - AC_SUBST(TCL_LIB_SPEC) - AC_SUBST(TCL_BIN_DIR) -dnl AC_SUBST(TCL_LIB_VERSIONS_OK) - -dnl not used, don't export to save symbols -dnl AC_SUBST(TCL_SHARED_LIB_SUFFIX) - -dnl not used, don't export to save symbols -dnl AC_SUBST(TCL_UNSHARED_LIB_SUFFIX) -]) - -dnl ==================================================================== -AC_DEFUN([CYG_AC_PATH_TK], [ - CYG_AC_PATH_TKH - CYG_AC_PATH_TKCONFIG - CYG_AC_LOAD_TKCONFIG -]) -AC_DEFUN([CYG_AC_PATH_TKH], [ -# -# Ok, lets find the tk source trees so we can use the headers -# If the directory (presumably symlink) named "tk" exists, use that one -# in preference to any others. Same logic is used when choosing library -# and again with Tcl. The search order is the best place to look first, then in -# decreasing significance. The loop breaks if the trigger file is found. -# Note the gross little conversion here of srcdir by cd'ing to the found -# directory. This converts the path from a relative to an absolute, so -# recursive cache variables for the path will work right. We check all -# the possible paths in one loop rather than many separate loops to speed -# things up. -# the alternative search directory is involked by --with-tkinclude -# -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_tk=true -AC_MSG_CHECKING(for Tk headers in the source tree) -AC_ARG_WITH(tkinclude, [ --with-tkinclude directory where tk headers are], with_tkinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_tkh,[ -dnl first check to see if --with-tkinclude was specified -if test x"${with_tkinclude}" != x ; then - if test -f ${with_tkinclude}/tk.h ; then - ac_cv_c_tkh=`(cd ${with_tkinclude}; ${PWDCMD-pwd})` - elif test -f ${with_tkinclude}/generic/tk.h ; then - ac_cv_c_tkh=`(cd ${with_tkinclude}/generic; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tkinclude} directory doesn't contain headers]) - fi -fi - -dnl next check if it came with Tk configuration file -if test x"${ac_cv_c_tkconfig}" != x ; then - for i in $dirlist; do - if test -f $ac_cv_c_tkconfig/$i/generic/tk.h ; then - ac_cv_c_tkh=`(cd $ac_cv_c_tkconfig/$i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_tkh}" = x ; then - dnl find the top level Tk source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/tk* 2>/dev/null`" ; then - tkpath=$srcdir/$i - break - fi - done - - dnl find the exact Tk source dir. We do it this way, cause there - dnl might be multiple version of Tk, and we want the most recent one. - for i in `ls -dr $tkpath/tk* 2>/dev/null ` ; do - if test -f $i/generic/tk.h ; then - ac_cv_c_tkh=`(cd $i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl see if one is installed -if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_RESULT(none) - dnl Get the path to the compiler. We do it this way instead of using - dnl AC_CHECK_HEADER, cause this doesn't depend in having X configured. - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/include - if test -f $ccpath/tk.h; then - ac_cv_c_tkh=$ccpath - fi -else - AC_MSG_RESULT(${ac_cv_c_tkh}) -fi -]) - TKHDIR="" -if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_ERROR([Can't find any Tk headers]) -fi -if test x"${ac_cv_c_tkh}" != x ; then - no_tk="" - if test x"${ac_cv_c_tkh}" != x"installed" ; then - if test x"${CC}" = xcl ; then - tmp="`cygpath --windows ${ac_cv_c_tkh}`" - ac_cv_c_tkh="`echo $tmp | sed -e s#\\\\\\\\#/#g`" - fi - AC_MSG_RESULT([found in ${ac_cv_c_tkh}]) - TKHDIR="-I${ac_cv_c_tkh}" - fi -fi - -AC_SUBST(TKHDIR) -]) - -AC_DEFUN([CYG_AC_PATH_TKCONFIG], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -dnl First, look for one uninstalled. -dnl the alternative search directory is invoked by --with-tkconfig -if test x"${no_tk}" = x ; then - dnl we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tkconfig, [ --with-tkconfig directory containing tk configuration (tkConfig.sh)], - with_tkconfig=${withval}) - AC_MSG_CHECKING([for Tk configuration script]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - dnl First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd ${with_tkconfig}; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - dnl next check if it came with Tk configuration file in the source tree - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in $dirlist; do - dnl need to test both unix and win directories, since - dnl cygwin's tkConfig.sh could be in either directory depending - dnl on the cygwin port of tk. - if test -f $srcdir/$i/unix/tkConfig.sh ; then - ac_cv_c_tkconfig=`(cd $srcdir/$i/unix; ${PWDCMD-pwd})` - break - fi - if test -f $srcdir/$i/win/tkConfig.sh ; then - ac_cv_c_tkconfig=`(cd $srcdir/$i/unix; ${PWDCMD-pwd})` - break - fi - done - fi - dnl check in a few other locations - if test x"${ac_cv_c_tkconfig}" = x ; then - dnl find the top level Tk source directory - for i in $dirlist; do - if test -n "`ls -dr $i/tk* 2>/dev/null`" ; then - tkconfpath=$i - break - fi - done - - dnl find the exact Tk dir. We do it this way, cause there - dnl might be multiple version of Tk, and we want the most recent one. - for i in `ls -dr $tkconfpath/tk* 2>/dev/null ` ; do - dnl need to test both unix and win directories, since - dnl cygwin's tkConfig.sh could be in either directory depending - dnl on the cygwin port of tk. - if test -f $i/unix/tkConfig.sh ; then - ac_cv_c_tkconfig=`(cd $i/unix; ${PWDCMD-pwd})` - break - fi - if test -f $i/win/tkConfig.sh ; then - ac_cv_c_tkconfig=`(cd $i/win; ${PWDCMD-pwd})` - break - fi - done - fi - - dnl Check to see if it's installed. We have to look in the $CC path - dnl to find it, cause our $prefix may not match the compilers. - if test x"${ac_cv_c_tkconfig}" = x ; then - dnl Get the path to the compiler - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/lib - if test -f $ccpath/tkConfig.sh; then - ac_cv_c_tkconfig=$ccpath - fi - fi - ]) dnl end of cache_val - - if test x"${ac_cv_c_tkconfig}" = x ; then - TKCONFIG="" - AC_MSG_WARN(Can't find Tk configuration definitions) - else - no_tk="" - TKCONFIG=${ac_cv_c_tkconfig}/tkConfig.sh - AC_MSG_RESULT(${TKCONFIG}) - fi -fi -AC_SUBST(TKCONFIG) -]) - -dnl Defined as a separate macro so we don't have to cache the values -dnl from PATH_TKCONFIG (because this can also be cached). -AC_DEFUN([CYG_AC_LOAD_TKCONFIG], [ - if test -f "$TKCONFIG" ; then - . $TKCONFIG - fi - - AC_SUBST(TK_VERSION) -dnl not actually used, don't export to save symbols -dnl AC_SUBST(TK_MAJOR_VERSION) -dnl AC_SUBST(TK_MINOR_VERSION) - AC_SUBST(TK_DEFS) - -dnl not used, don't export to save symbols - AC_SUBST(TK_LIB_FILE) - AC_SUBST(TK_LIB_FULL_PATH) - AC_SUBST(TK_LIBS) -dnl not used, don't export to save symbols -dnl AC_SUBST(TK_PREFIX) - -dnl not used, don't export to save symbols -dnl AC_SUBST(TK_EXEC_PREFIX) - AC_SUBST(TK_BUILD_INCLUDES) - AC_SUBST(TK_XINCLUDES) - AC_SUBST(TK_XLIBSW) - AC_SUBST(TK_BUILD_LIB_SPEC) - AC_SUBST(TK_LIB_SPEC) -]) - -dnl ==================================================================== -dnl Ok, lets find the itcl source trees so we can use the headers -dnl the alternative search directory is involked by --with-itclinclude -AC_DEFUN([CYG_AC_PATH_ITCL], [ - CYG_AC_PATH_ITCLH - CYG_AC_PATH_ITCLLIB - CYG_AC_PATH_ITCLSH - CYG_AC_PATH_ITCLMKIDX -]) -AC_DEFUN([CYG_AC_PATH_ITCLH], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_itcl=true -AC_MSG_CHECKING(for Itcl headers in the source tree) -AC_ARG_WITH(itclinclude, [ --with-itclinclude directory where itcl headers are], with_itclinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_itclh,[ -dnl first check to see if --with-itclinclude was specified -if test x"${with_itclinclude}" != x ; then - if test -f ${with_itclinclude}/itcl.h ; then - ac_cv_c_itclh=`(cd ${with_itclinclude}; ${PWDCMD-pwd})` - elif test -f ${with_itclinclude}/src/itcl.h ; then - ac_cv_c_itclh=`(cd ${with_itclinclude}/src; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_itclinclude} directory doesn't contain headers]) - fi -fi - -dnl next check if it came with Itcl configuration file -if test x"${ac_cv_c_itclconfig}" != x ; then - for i in $dirlist; do - if test -f $ac_cv_c_itclconfig/$i/src/itcl.h ; then - ac_cv_c_itclh=`(cd $ac_cv_c_itclconfig/$i/src; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_itclh}" = x ; then - dnl find the top level Itcl source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/itcl* 2>/dev/null`" ; then - itclpath=$srcdir/$i - break - fi - done - - dnl find the exact Itcl source dir. We do it this way, cause there - dnl might be multiple version of Itcl, and we want the most recent one. - for i in `ls -dr $itclpath/itcl* 2>/dev/null ` ; do - if test -f $i/src/itcl.h ; then - ac_cv_c_itclh=`(cd $i/src; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl see if one is installed -if test x"${ac_cv_c_itclh}" = x ; then - AC_MSG_RESULT(none) - AC_CHECK_HEADER(itcl.h, ac_cv_c_itclh=installed, ac_cv_c_itclh="") -else - AC_MSG_RESULT(${ac_cv_c_itclh}) -fi -]) - ITCLHDIR="" -if test x"${ac_cv_c_itclh}" = x ; then - AC_MSG_ERROR([Can't find any Itcl headers]) -fi -if test x"${ac_cv_c_itclh}" != x ; then - no_itcl="" - if test x"${ac_cv_c_itclh}" != x"installed" ; then - AC_MSG_RESULT(${ac_cv_c_itclh}) - ITCLHDIR="-I${ac_cv_c_itclh}" - fi -fi - -AC_SUBST(ITCLHDIR) -]) - -dnl Ok, lets find the itcl library -dnl First, look for one uninstalled. -dnl the alternative search directory is invoked by --with-itcllib -AC_DEFUN([CYG_AC_PATH_ITCLLIB], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -if test x"${no_itcl}" = x ; then - dnl we reset no_itcl incase something fails here - no_itcl=true - AC_ARG_WITH(itcllib, - [ --with-itcllib directory where the itcl library is], - with_itcllib=${withval}) - AC_MSG_CHECKING([for Itcl library]) - AC_CACHE_VAL(ac_cv_c_itcllib,[ - dnl First check to see if --with-itcllib was specified. - if test x"${with_itcllib}" != x ; then - if test -f "${with_itcllib}/libitcl$TCL_SHARED_LIB_SUFFIX" ; then - ac_cv_c_itcllib=`(cd ${with_itcllib}; ${PWDCMD-pwd})`/libitcl$TCL_SHARED_LIB_SUFFIX - else - if test -f "${with_itcllib}/libitcl$TCL_UNSHARED_LIB_SUFFIX"; then - ac_cv_c_itcllib=`(cd ${with_itcllib}; ${PWDCMD-pwd})`/libitcl$TCL_UNSHARED_LIB_SUFFIX - fi - fi - fi - dnl then check for a Itcl library. Since these are uninstalled, - dnl use the simple lib name root. - if test x"${ac_cv_c_itcllib}" = x ; then - dnl find the top level Itcl build directory - for i in $dirlist; do - if test -n "`ls -dr $i/itcl* 2>/dev/null`" ; then - itclpath=$i/itcl - break - fi - done - dnl Itcl 7.5 and greater puts library in subdir. Look there first. - if test -f "$itclpath/src/libitcl.$TCL_SHLIB_SUFFIX" ; then - ac_cv_c_itcllib=`(cd $itclpath/src; ${PWDCMD-pwd})` - elif test -f "$itclpath/src/libitcl.a"; then - ac_cv_c_itcllib=`(cd $itclpath/src; ${PWDCMD-pwd})` - fi - fi - dnl check in a few other private locations - if test x"${ac_cv_c_itcllib}" = x ; then - for i in ${dirlist}; do - if test -n "`ls -dr ${srcdir}/$i/itcl* 2>/dev/null`" ; then - itclpath=${srcdir}/$i - break - fi - done - for i in `ls -dr ${itclpath}/itcl* 2>/dev/null` ; do - dnl Itcl 7.5 and greater puts library in subdir. Look there first. - if test -f "$i/src/libitcl$TCL_SHLIB_SUFFIX" ; then - ac_cv_c_itcllib=`(cd $i/src; ${PWDCMD-pwd})` - break - elif test -f "$i/src/libitcl.a"; then - ac_cv_c_itcllib=`(cd $i/src; ${PWDCMD-pwd})` - break - fi - done - fi - - dnl see if one is conveniently installed with the compiler - if test x"${ac_cv_c_itcllib}" = x ; then - dnl Get the path to the compiler - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/lib - dnl Itcl 7.5 and greater puts library in subdir. Look there first. - if test -f "${ccpath}/libitcl$TCL_SHLIB_SUFFIX" ; then - ac_cv_c_itcllib=`(cd ${ccpath}; ${PWDCMD-pwd})` - elif test -f "${ccpath}/libitcl.a"; then - ac_cv_c_itcllib=`(cd ${ccpath}; ${PWDCMD-pwd})` - fi - fi - ]) - if test x"${ac_cv_c_itcllib}" = x ; then - ITCLLIB="" - AC_MSG_WARN(Can't find Itcl library) - else - ITCLLIB="-L${ac_cv_c_itcllib}" - AC_MSG_RESULT(${ac_cv_c_itcllib}) - no_itcl="" - fi -fi - -AC_PROVIDE([$0]) -AC_SUBST(ITCLLIB) -]) - - -dnl ==================================================================== -dnl Ok, lets find the itcl source trees so we can use the itcl_sh script -dnl the alternative search directory is involked by --with-itclinclude -AC_DEFUN([CYG_AC_PATH_ITCLSH], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_itcl=true -AC_MSG_CHECKING(for the itcl_sh script) -AC_ARG_WITH(itclinclude, [ --with-itclinclude directory where itcl headers are], with_itclinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_itclsh,[ -dnl first check to see if --with-itclinclude was specified -if test x"${with_itclinclude}" != x ; then - if test -f ${with_itclinclude}/itcl_sh ; then - ac_cv_c_itclsh=`(cd ${with_itclinclude}; ${PWDCMD-pwd})` - elif test -f ${with_itclinclude}/src/itcl_sh ; then - ac_cv_c_itclsh=`(cd ${with_itclinclude}/src; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_itclinclude} directory doesn't contain itcl_sh]) - fi -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_itclsh}" = x ; then - dnl find the top level Itcl source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/itcl* 2>/dev/null`" ; then - itclpath=$srcdir/$i - break - fi - done - - dnl find the exact Itcl source dir. We do it this way, cause there - dnl might be multiple version of Itcl, and we want the most recent one. - for i in `ls -dr $itclpath/itcl* 2>/dev/null ` ; do - if test -f $i/src/itcl_sh ; then - ac_cv_c_itclsh=`(cd $i/src; ${PWDCMD-pwd})`/itcl_sh - break - fi - done -fi - -dnl see if one is installed -if test x"${ac_cv_c_itclsh}" = x ; then - AC_MSG_RESULT(none) - AC_PATH_PROG(ac_cv_c_itclsh, itcl_sh) -else - AC_MSG_RESULT(${ac_cv_c_itclsh}) -fi -]) - -if test x"${ac_cv_c_itclsh}" = x ; then - AC_MSG_ERROR([Can't find the itcl_sh script]) -fi -if test x"${ac_cv_c_itclsh}" != x ; then - no_itcl="" - AC_MSG_RESULT(${ac_cv_c_itclsh}) - ITCLSH="${ac_cv_c_itclsh}" -fi -AC_SUBST(ITCLSH) -]) - - -dnl ==================================================================== -dnl Ok, lets find the itcl source trees so we can use the itcl_sh script -dnl the alternative search directory is involked by --with-itclinclude -AC_DEFUN([CYG_AC_PATH_ITCLMKIDX], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_itcl=true -AC_MSG_CHECKING(for itcl_mkindex.tcl script) -AC_ARG_WITH(itclinclude, [ --with-itclinclude directory where itcl headers are], with_itclinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_itclmkidx,[ -dnl first check to see if --with-itclinclude was specified -if test x"${with_itclinclude}" != x ; then - if test -f ${with_itclinclude}/itcl_sh ; then - ac_cv_c_itclmkidx=`(cd ${with_itclinclude}; ${PWDCMD-pwd})` - elif test -f ${with_itclinclude}/src/itcl_sh ; then - ac_cv_c_itclmkidx=`(cd ${with_itclinclude}/src; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_itclinclude} directory doesn't contain itcl_sh]) - fi -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_itclmkidx}" = x ; then - dnl find the top level Itcl source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/itcl* 2>/dev/null`" ; then - itclpath=$srcdir/$i - break - fi - done - - dnl find the exact Itcl source dir. We do it this way, cause there - dnl might be multiple version of Itcl, and we want the most recent one. - for i in `ls -dr $itclpath/itcl* 2>/dev/null ` ; do - if test -f $i/library/itcl_mkindex.tcl ; then - ac_cv_c_itclmkidx=`(cd $i/library; ${PWDCMD-pwd})`/itcl_mkindex.tcl - break - fi - done -fi -if test x"${ac_cv_c_itclmkidx}" = x ; then - dnl Get the path to the compiler - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/share - dnl Itcl 7.5 and greater puts library in subdir. Look there first. - for i in `ls -dr $ccpath/itcl* 2>/dev/null ` ; do - if test -f $i/itcl_mkindex.tcl ; then - ac_cv_c_itclmkidx=`(cd $i; ${PWDCMD-pwd})`/itcl_mkindex.tcl - break - fi - done -fi -]) - -if test x"${ac_cv_c_itclmkidx}" = x ; then - AC_MSG_ERROR([Can't find the itcl_mkindex.tcl script]) -fi -if test x"${ac_cv_c_itclmkidx}" != x ; then - no_itcl="" - AC_MSG_RESULT(${ac_cv_c_itclmkidx}) - ITCLMKIDX="${ac_cv_c_itclmkidx}" -else - AC_MSG_RESULT(none) -fi -AC_SUBST(ITCLMKIDX) -]) - -dnl ==================================================================== -dnl Ok, lets find the tix source trees so we can use the headers -dnl the alternative search directory is involked by --with-tixinclude -AC_DEFUN([CYG_AC_PATH_TIX], [ - CYG_AC_PATH_TIXH - CYG_AC_PATH_TIXLIB -]) -AC_DEFUN([CYG_AC_PATH_TIXH], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -no_tix=true -AC_MSG_CHECKING(for Tix headers in the source tree) -AC_ARG_WITH(tixinclude, [ --with-tixinclude directory where tix headers are], with_tixinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_tixh,[ -dnl first check to see if --with-tixinclude was specified -if test x"${with_tixinclude}" != x ; then - if test -f ${with_tixinclude}/tix.h ; then - ac_cv_c_tixh=`(cd ${with_tixinclude}; ${PWDCMD-pwd})` - elif test -f ${with_tixinclude}/generic/tix.h ; then - ac_cv_c_tixh=`(cd ${with_tixinclude}/generic; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tixinclude} directory doesn't contain headers]) - fi -fi - -dnl next check if it came with Tix configuration file -if test x"${ac_cv_c_tixconfig}" != x ; then - for i in $dirlist; do - if test -f $ac_cv_c_tixconfig/$i/generic/tix.h ; then - ac_cv_c_tixh=`(cd $ac_cv_c_tixconfig/$i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_tixh}" = x ; then - dnl find the top level Tix source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/tix* 2>/dev/null`" ; then - tixpath=$srcdir/$i - break - fi - done - - dnl find the exact Tix source dir. We do it this way, cause there - dnl might be multiple version of Tix, and we want the most recent one. - for i in `ls -dr $tixpath/tix* 2>/dev/null ` ; do - if test -f $i/generic/tix.h ; then - ac_cv_c_tixh=`(cd $i/generic; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl see if one is installed -if test x"${ac_cv_c_tixh}" = x ; then - AC_MSG_RESULT(none) - dnl Get the path to the compiler - - dnl Get the path to the compiler. We do it this way instead of using - dnl AC_CHECK_HEADER, cause this doesn't depend in having X configured. - ccpath=`which ${CC} | sed -e 's:/bin/.*::'`/include - if test -f $ccpath/tix.h; then - ac_cv_c_tixh=installed - fi -else - AC_MSG_RESULT(${ac_cv_c_tixh}) -fi -]) -if test x"${ac_cv_c_tixh}" = x ; then - AC_MSG_ERROR([Can't find any Tix headers]) -fi -if test x"${ac_cv_c_tixh}" != x ; then - no_tix="" - AC_MSG_RESULT(${ac_cv_c_tixh}) - if test x"${ac_cv_c_tixh}" != x"installed" ; then - TIXHDIR="-I${ac_cv_c_tixh}" - fi -fi - -AC_SUBST(TIXHDIR) -]) - -AC_DEFUN([CYG_AC_PATH_TIXCONFIG], [ -# -# Ok, lets find the tix configuration -# First, look for one uninstalled. -# the alternative search directory is invoked by --with-tixconfig -# - -if test x"${no_tix}" = x ; then - # we reset no_tix in case something fails here - no_tix=true - AC_ARG_WITH(tixconfig, [ --with-tixconfig directory containing tix configuration (tixConfig.sh)], - with_tixconfig=${withval}) - AC_MSG_CHECKING([for Tix configuration]) - AC_CACHE_VAL(ac_cv_c_tixconfig,[ - - # First check to see if --with-tixconfig was specified. - if test x"${with_tixconfig}" != x ; then - if test -f "${with_tixconfig}/tixConfig.sh" ; then - ac_cv_c_tixconfig=`(cd ${with_tixconfig}; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_tixconfig} directory doesn't contain tixConfig.sh]) - fi - fi - - # then check for a private Tix library - if test x"${ac_cv_c_tixconfig}" = x ; then - for i in \ - ../tix \ - `ls -dr ../tix[[4]]* 2>/dev/null` \ - ../../tix \ - `ls -dr ../../tix[[4]]* 2>/dev/null` \ - ../../../tix \ - `ls -dr ../../../tix[[4]]* 2>/dev/null` ; do - if test -f "$i/tixConfig.sh" ; then - ac_cv_c_tixconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few common install locations - if test x"${ac_cv_c_tixconfig}" = x ; then - for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do - if test -f "$i/tixConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few other private locations - if test x"${ac_cv_c_tixconfig}" = x ; then - for i in \ - ${srcdir}/../tix \ - `ls -dr ${srcdir}/../tix[[4-9]]* 2>/dev/null` ; do - if test -f "$i/tixConfig.sh" ; then - ac_cv_c_tixconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - ]) - if test x"${ac_cv_c_tixconfig}" = x ; then - TIXCONFIG="# no Tix configs found" - AC_MSG_WARN(Can't find Tix configuration definitions) - else - no_tix= - TIXCONFIG=${ac_cv_c_tixconfig}/tixConfig.sh - AC_MSG_RESULT(found $TIXCONFIG) - fi -fi - -]) - -# Defined as a separate macro so we don't have to cache the values -# from PATH_TIXCONFIG (because this can also be cached). -AC_DEFUN([CYG_AC_LOAD_TIXCONFIG], [ - if test -f "$TIXCONFIG" ; then - . $TIXCONFIG - fi - - AC_SUBST(TIX_BUILD_LIB_SPEC) - AC_SUBST(TIX_LIB_FULL_PATH) -]) - -AC_DEFUN([CYG_AC_PATH_ITCLCONFIG], [ -# -# Ok, lets find the itcl configuration -# First, look for one uninstalled. -# the alternative search directory is invoked by --with-itclconfig -# - -if test x"${no_itcl}" = x ; then - # we reset no_itcl in case something fails here - no_itcl=true - AC_ARG_WITH(itclconfig, [ --with-itclconfig directory containing itcl configuration (itclConfig.sh)], - with_itclconfig=${withval}) - AC_MSG_CHECKING([for Itcl configuration]) - AC_CACHE_VAL(ac_cv_c_itclconfig,[ - - # First check to see if --with-itclconfig was specified. - if test x"${with_itclconfig}" != x ; then - if test -f "${with_itclconfig}/itclConfig.sh" ; then - ac_cv_c_itclconfig=`(cd ${with_itclconfig}; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_itclconfig} directory doesn't contain itclConfig.sh]) - fi - fi - - # then check for a private itcl library - if test x"${ac_cv_c_itclconfig}" = x ; then - for i in \ - ../itcl/itcl \ - `ls -dr ../itcl/itcl[[3]]* 2>/dev/null` \ - ../../itcl/itcl \ - `ls -dr ../../itcl/itcl[[3]]* 2>/dev/null` \ - ../../../itcl/itcl \ - `ls -dr ../../../itcl/itcl[[3]]* 2>/dev/null` ; do - if test -f "$i/itclConfig.sh" ; then - ac_cv_c_itclconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few common install locations - if test x"${ac_cv_c_itclconfig}" = x ; then - for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do - if test -f "$i/itclConfig.sh" ; then - ac_cv_c_itclconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few other private locations - if test x"${ac_cv_c_itclconfig}" = x ; then - for i in \ - ${srcdir}/../itcl/itcl \ - `ls -dr ${srcdir}/../itcl/itcl[[3]]* 2>/dev/null` ; do - if test -f "$i/itcl/itclConfig.sh" ; then - ac_cv_c_itclconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - ]) - if test x"${ac_cv_c_itclconfig}" = x ; then - ITCLCONFIG="# no itcl configs found" - AC_MSG_WARN(Can't find itcl configuration definitions) - else - no_itcl= - ITCLCONFIG=${ac_cv_c_itclconfig}/itclConfig.sh - AC_MSG_RESULT(found $ITCLCONFIG) - fi -fi - -]) - -# Defined as a separate macro so we don't have to cache the values -# from PATH_ITCLCONFIG (because this can also be cached). -AC_DEFUN([CYG_AC_LOAD_ITCLCONFIG], [ - if test -f "$ITCLCONFIG" ; then - . $ITCLCONFIG - fi - - AC_SUBST(ITCL_BUILD_LIB_SPEC) - AC_SUBST(ITCL_SH) - AC_SUBST(ITCL_LIB_FILE) - AC_SUBST(ITCL_LIB_FULL_PATH) - -]) - - -AC_DEFUN([CYG_AC_PATH_ITKCONFIG], [ -# -# Ok, lets find the itk configuration -# First, look for one uninstalled. -# the alternative search directory is invoked by --with-itkconfig -# - -if test x"${no_itk}" = x ; then - # we reset no_itk in case something fails here - no_itk=true - AC_ARG_WITH(itkconfig, [ --with-itkconfig directory containing itk configuration (itkConfig.sh)], - with_itkconfig=${withval}) - AC_MSG_CHECKING([for Itk configuration]) - AC_CACHE_VAL(ac_cv_c_itkconfig,[ - - # First check to see if --with-itkconfig was specified. - if test x"${with_itkconfig}" != x ; then - if test -f "${with_itkconfig}/itkConfig.sh" ; then - ac_cv_c_itkconfig=`(cd ${with_itkconfig}; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_itkconfig} directory doesn't contain itkConfig.sh]) - fi - fi - - # then check for a private itk library - if test x"${ac_cv_c_itkconfig}" = x ; then - for i in \ - ../itcl/itk \ - `ls -dr ../itcl/itk[[3]]* 2>/dev/null` \ - ../../itcl/itk \ - `ls -dr ../../itcl/itk[[3]]* 2>/dev/null` \ - ../../../itcl/itk \ - `ls -dr ../../../itcl/itk[[3]]* 2>/dev/null` ; do - if test -f "$i/itkConfig.sh" ; then - ac_cv_c_itkconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few common install locations - if test x"${ac_cv_c_itkconfig}" = x ; then - for i in `ls -d ${prefix}/lib /usr/local/lib 2>/dev/null` ; do - if test -f "$i/itcl/itkConfig.sh" ; then - ac_cv_c_itkconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - # check in a few other private locations - if test x"${ac_cv_c_itkconfig}" = x ; then - for i in \ - ${srcdir}/../itcl/itk \ - `ls -dr ${srcdir}/../itcl/itk[[3]]* 2>/dev/null` ; do - if test -f "$i/itkConfig.sh" ; then - ac_cv_c_itkconfig=`(cd $i; ${PWDCMD-pwd})` - break - fi - done - fi - ]) - if test x"${ac_cv_c_itkconfig}" = x ; then - ITCLCONFIG="# no itk configs found" - AC_MSG_WARN(Can't find itk configuration definitions) - else - no_itk= - ITKCONFIG=${ac_cv_c_itkconfig}/itkConfig.sh - AC_MSG_RESULT(found $ITKCONFIG) - fi -fi - -]) - -# Defined as a separate macro so we don't have to cache the values -# from PATH_ITKCONFIG (because this can also be cached). -AC_DEFUN([CYG_AC_LOAD_ITKCONFIG], [ - if test -f "$ITKCONFIG" ; then - . $ITKCONFIG - fi - - AC_SUBST(ITK_BUILD_LIB_SPEC) - AC_SUBST(ITK_LIB_FILE) - AC_SUBST(ITK_LIB_FULL_PATH) -]) - - -dnl ==================================================================== -dnl Ok, lets find the libgui source trees so we can use the headers -dnl the alternative search directory is involked by --with-libguiinclude -AC_DEFUN([CYG_AC_PATH_LIBGUI], [ - CYG_AC_PATH_LIBGUIH - CYG_AC_PATH_LIBGUILIB -]) -AC_DEFUN([CYG_AC_PATH_LIBGUIH], [ -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../..../../../../../../../../../../.." -no_libgui=true -AC_MSG_CHECKING(for Libgui headers in the source tree) -AC_ARG_WITH(libguiinclude, [ --with-libguiinclude directory where libgui headers are], with_libguiinclude=${withval}) -AC_CACHE_VAL(ac_cv_c_libguih,[ -dnl first check to see if --with-libguiinclude was specified -if test x"${with_libguiinclude}" != x ; then - if test -f ${with_libguiinclude}/guitcl.h ; then - ac_cv_c_libguih=`(cd ${with_libguiinclude}; ${PWDCMD-pwd})` - elif test -f ${with_libguiinclude}/src/guitcl.h ; then - ac_cv_c_libguih=`(cd ${with_libguiinclude}/src; ${PWDCMD-pwd})` - else - AC_MSG_ERROR([${with_libguiinclude} directory doesn't contain headers]) - fi -fi - -dnl next check if it came with Libgui configuration file -if test x"${ac_cv_c_libguiconfig}" != x ; then - for i in $dirlist; do - if test -f $ac_cv_c_libguiconfig/$i/src/guitcl.h ; then - ac_cv_c_libguih=`(cd $ac_cv_c_libguiconfig/$i/src; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl next check in private source directory -dnl since ls returns lowest version numbers first, reverse its output -if test x"${ac_cv_c_libguih}" = x ; then - dnl find the top level Libgui source directory - for i in $dirlist; do - if test -n "`ls -dr $srcdir/$i/libgui* 2>/dev/null`" ; then - libguipath=$srcdir/$i - break - fi - done - - dnl find the exact Libgui source dir. We do it this way, cause there - dnl might be multiple version of Libgui, and we want the most recent one. - for i in `ls -dr $libguipath/libgui* 2>/dev/null ` ; do - if test -f $i/src/guitcl.h ; then - ac_cv_c_libguih=`(cd $i/src; ${PWDCMD-pwd})` - break - fi - done -fi - -dnl see if one is installed -if test x"${ac_cv_c_libguih}" = x ; then - AC_MSG_RESULT(none) - AC_CHECK_HEADER(guitcl.h, ac_cv_c_libguih=installed, ac_cv_c_libguih="") -fi -]) -LIBGUIHDIR="" -if test x"${ac_cv_c_libguih}" = x ; then - AC_MSG_WARN([Can't find any Libgui headers]) -fi -if test x"${ac_cv_c_libguih}" != x ; then - no_libgui="" - if test x"${ac_cv_c_libguih}" != x"installed" ; then - LIBGUIHDIR="-I${ac_cv_c_libguih}" - fi -fi -AC_MSG_RESULT(${ac_cv_c_libguih}) -AC_SUBST(LIBGUIHDIR) -]) - -dnl ==================================================================== -dnl find the GUI library -AC_DEFUN([CYG_AC_PATH_LIBGUILIB], [ -AC_MSG_CHECKING(for GUI library in the build tree) -dirlist=".. ../../ ../../../ ../../../../ ../../../../../ ../../../../../../ ../../../../../../.. ../../../../../../../.. ../../../../../../../../.. ../../../../../../../../../.." -dnl look for the library -AC_MSG_CHECKING(for GUI library) -AC_CACHE_VAL(ac_cv_c_libguilib,[ -if test x"${ac_cv_c_libguilib}" = x ; then - for i in $dirlist; do - if test -f "$i/libgui/src/Makefile" ; then - ac_cv_c_libguilib=`(cd $i/libgui/src; ${PWDCMD-pwd})` - break - fi - done -fi -]) -if test x"${ac_cv_c_libguilib}" != x ; then - GUILIB="${GUILIB} -L${ac_cv_c_libguilib}" - LIBGUILIB="-lgui" - AC_MSG_RESULT(${ac_cv_c_libguilib}) -else - AC_MSG_RESULT(none) -fi - -AC_SUBST(GUILIB) -AC_SUBST(LIBGUILIB) -]) |