diff options
Diffstat (limited to 'gcc-4.2.1/boehm-gc/configure.ac')
| -rw-r--r-- | gcc-4.2.1/boehm-gc/configure.ac | 561 |
1 files changed, 0 insertions, 561 deletions
diff --git a/gcc-4.2.1/boehm-gc/configure.ac b/gcc-4.2.1/boehm-gc/configure.ac deleted file mode 100644 index bda3bc8ed..000000000 --- a/gcc-4.2.1/boehm-gc/configure.ac +++ /dev/null @@ -1,561 +0,0 @@ -# Copyright (c) 1999, 2000, 2001, 2002, 2003, 2006 by Red Hat, Inc. All rights reserved. -# Copyright 2004 Nathanael Nerode -# -# THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED -# OR IMPLIED. ANY USE IS AT YOUR OWN RISK. -# -# Permission is hereby granted to use or copy this program -# for any purpose, provided the above notices are retained on all copies. -# Permission to modify the code and to distribute modified code is granted, -# provided the above notices are retained, and a notice that the code was -# modified is included with the above copyright notice. -# -# Original author: Tom Tromey -# Modified by Nathanael Nerode - -dnl Process this file with autoconf to produce configure. - -AC_PREREQ(2.59) -AC_INIT -AC_CONFIG_SRCDIR(gcj_mlc.c) -# This works around the fact that libtool configuration may change LD -# for this particular configuration, but some shells, instead of -# keeping the changes in LD private, export them just because LD is -# exported. -ORIGINAL_LD_FOR_MULTILIBS=$LD - -AM_ENABLE_MULTILIB(, ..) - -AC_CANONICAL_HOST -AC_CANONICAL_TARGET - -# Get the 'noncanonical' system names. -ACX_NONCANONICAL_TARGET - -# This works around an automake problem. -mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs" -AC_SUBST(mkinstalldirs) - -AM_INIT_AUTOMAKE(gc, 6.6, no-define) - -# The autoconf 2.5x version of the no-executables hack. -GCC_NO_EXECUTABLES - -# Yak. We must force CC and CXX to /not/ be precious variables; otherwise -# the wrong, non-multilib-adjusted value will be used in multilibs. -# As a side effect, we have to subst CFLAGS and CXXFLAGS ourselves. - -m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS]) -m4_define([_AC_ARG_VAR_PRECIOUS],[]) -AC_PROG_CC -AC_PROG_CXX -m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS]) - -AM_PROG_CC_C_O - -AC_SUBST(CFLAGS) -AC_SUBST(CXXFLAGS) - -# Newer automakes demand CCAS and CCASFLAGS. -: ${CCAS='$(CC)'} -: ${CCASFLAGS='$(CFLAGS)'} -AC_SUBST(CCAS) -AC_SUBST(CCASFLAGS) - -AC_CHECK_TOOL(AS, as) -AC_CHECK_TOOL(AR, ar) -AC_CHECK_TOOL(RANLIB, ranlib, :) - -AC_PROG_INSTALL - -AM_MAINTAINER_MODE - -. ${srcdir}/configure.host - -case ${gc_basedir} in -/* | [A-Za-z]:[/\\]*) gc_flagbasedir=${gc_basedir} ;; -*) gc_flagbasedir='$(top_builddir)/'${gc_basedir} ;; -esac - -gc_cflags="${gc_cflags} -Iinclude -I"'$(top_builddir)'"/./targ-include -I${gc_flagbasedir}/libc/include" -case "${host}" in - *-*-cygwin32*) - gc_cflags="${gc_cflags} -I${gc_flagbasedir}/../winsup/include" - ;; -esac - -dnl gc_cflags="${gc_cflags} -fno-builtin" - -GC_CFLAGS=${gc_cflags} -AC_SUBST(GC_CFLAGS) - -AC_PROG_LIBTOOL - -dnl We use these options to decide which functions to include. -AC_ARG_WITH(target-subdir, -[ --with-target-subdir=SUBDIR - configuring with a cross compiler]) -AC_ARG_WITH(cross-host, -[ --with-cross-host=HOST configuring with a cross compiler]) - -AC_MSG_CHECKING([for thread model used by GCC]) -THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'` -if test -z "$THREADS"; then - THREADS=no -fi -AC_MSG_RESULT([$THREADS]) - -AC_ARG_ENABLE(parallel-mark, -[ --enable-parallel-mark parallelize marking and free list construction], - [case "$THREADS" in - no | none | single) - AC_MSG_ERROR([Parallel mark requires --enable-threads=x spec]) - ;; - esac] -) - -AM_CPPFLAGS="-I`cd $srcdir && ${PWDCMD-pwd}`/include" -THREADLIBS= -case "$THREADS" in - no | none | single) - THREADS=none - ;; - posix | posix95 | pthreads) - THREADS=posix - THREADLIBS=-lpthread - case "$host" in - x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* | alpha-*-linux*) - AC_DEFINE(GC_LINUX_THREADS,1,[support for Xavier Leroy's Linux threads]) - AC_DEFINE(_REENTRANT,1,[Use reentrant code]) - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK,1,[allow the marker to run in multiple threads]) - fi - AC_DEFINE(THREAD_LOCAL_ALLOC,1,[define GC_local_malloc() & GC_local_malloc_atomic()]) - ;; - *-*-linux*) - AC_DEFINE(GC_LINUX_THREADS,1) - AC_DEFINE(_REENTRANT,1) - ;; - *-*-aix*) - AC_DEFINE(GC_AIX_THREADS,1,[support AIX threads]) - AC_DEFINE(_REENTRANT,1) - ;; - *-*-hpux11*) - AC_MSG_WARN("Only HP-UX 11 POSIX threads are supported.") - AC_DEFINE(GC_HPUX_THREADS,1,[enables support for HP/UX 11 pthreads]) - AC_DEFINE(_POSIX_C_SOURCE,199506L,[POSIX version of C Source]) - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK,1) - fi - AC_DEFINE(THREAD_LOCAL_ALLOC,1) - THREADLIBS="-lpthread -lrt" - # HPUX needs REENTRANT for the _r calls. - AC_DEFINE(_REENTRANT, 1, [Required define if using POSIX threads]) - ;; - *-*-hpux10*) - AC_MSG_WARN("Only HP-UX 11 POSIX threads are supported.") - ;; - *-*-kfreebsd*-gnu) - AC_DEFINE(GC_FREEBSD_THREADS) - INCLUDES="$INCLUDES -pthread" - THREADDLLIBS=-pthread - AC_DEFINE(_REENTRANT) - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK) - fi - AC_DEFINE(THREAD_LOCAL_ALLOC) - AC_DEFINE(USE_COMPILER_TLS, 1,[use tls for boehm]) - ;; - *-*-freebsd*) - AC_MSG_WARN("FreeBSD does not yet fully support threads with Boehm GC.") - AC_DEFINE(GC_FREEBSD_THREADS,1,[support FreeBSD threads]) - AM_CPPFLAGS="$AM_CPPFLAGS -pthread" - THREADLIBS=-pthread - ;; - *-*-solaris*) - AC_DEFINE(GC_SOLARIS_PTHREADS,1,[support for Solaris pthreads]) - # Need to use alternate thread library, otherwise gctest hangs - # on Solaris 8. - multi_os_directory=`$CC -print-multi-os-directory` - THREADLIBS="-L/usr/lib/lwp/$multi_os_directory \ - -R/usr/lib/lwp/$multi_os_directory -lpthread -lthread -lrt" - ;; - *-*-irix*) - AC_DEFINE(GC_IRIX_THREADS,1,[support for Irix pthreads]) - ;; - *-*-cygwin*) - AC_DEFINE(GC_WIN32_THREADS,1,[support for win32 threads]) - ;; - *-*-darwin*) - AC_DEFINE(GC_DARWIN_THREADS,1,[support for Mac OS X pthreads]) - AC_DEFINE(THREAD_LOCAL_ALLOC,1) - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK,1) - fi - ;; - *-*-osf*) - AC_DEFINE(GC_OSF1_THREADS,1,[support for Tru64 pthreads]) - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK,1) - AC_DEFINE(THREAD_LOCAL_ALLOC,1) - # May want to enable it in other cases, too. - # Measurements havent yet been done. - fi - AM_CPPFLAGS="$AM_CPPFLAGS -pthread" - THREADLIBS="-lpthread -lrt" - ;; - esac - ;; - win32) - AC_DEFINE(GC_WIN32_THREADS,1) - dnl Old wine getenv may not return NULL for missing entry. - dnl Define EMPTY_GETENV_RESULTS here to work around the bug. - ;; - dgux386) - THREADS=dgux386 -AC_MSG_RESULT($THREADLIBS) - # Use pthread GCC switch - THREADLIBS=-pthread - if test "${enable_parallel_mark}" = yes; then - AC_DEFINE(PARALLEL_MARK,1) - fi - AC_DEFINE(THREAD_LOCAL_ALLOC,1) - AC_DEFINE(GC_DGUX386_THREADS,1,[support for DB/UX on I386 threads]) - AC_DEFINE(DGUX_THREADS,1,[No description]) - # Enable _POSIX4A_DRAFT10_SOURCE with flag -pthread - AM_CPPFLAGS="-pthread $AM_CPPFLAGS" - ;; - aix) - THREADS=posix - THREADLIBS=-lpthread - AC_DEFINE(GC_AIX_THREADS,1) - AC_DEFINE(_REENTRANT,1) - ;; - decosf1 | irix | mach | os2 | solaris | dce | vxworks) - AC_MSG_ERROR(thread package $THREADS not yet supported) - ;; - *) - AC_MSG_ERROR($THREADS is an unknown thread package) - ;; -esac -AC_SUBST(THREADLIBS) - -case "$host" in - powerpc-*-darwin*) - powerpc_darwin=true - ;; -esac -AM_CONDITIONAL(POWERPC_DARWIN,test x$powerpc_darwin = xtrue) - -# Darwin needs a few extra special tests to deal with variation in the -# system headers. -case "$host" in - powerpc*-*-darwin*) - AC_CHECK_MEMBER(ppc_thread_state_t.r0, - AC_DEFINE(HAS_PPC_THREAD_STATE_R0,1, - [ppc_thread_state_t has field r0]),, - [#include <mach/thread_status.h>]) - AC_CHECK_MEMBER(ppc_thread_state_t.__r0, - AC_DEFINE(HAS_PPC_THREAD_STATE___R0,1,dnl - [ppc_thread_state_t has field __r0]),, - [#include <mach/thread_status.h>]) - AC_CHECK_MEMBER(ppc_thread_state64_t.r0, - AC_DEFINE(HAS_PPC_THREAD_STATE64_R0,1,dnl - [ppc_thread_state64_t has field r0]),, - [#include <mach/thread_status.h>]) - AC_CHECK_MEMBER(ppc_thread_state64_t.__r0, - AC_DEFINE(HAS_PPC_THREAD_STATE64___R0,1,dnl - [ppc_thread_state64_t has field __r0]),, - [#include <mach/thread_status.h>]) - ;; - i?86*-*-darwin*) - AC_CHECK_MEMBER(x86_thread_state32_t.eax, - AC_DEFINE(HAS_X86_THREAD_STATE32_EAX,1,dnl - [x86_thread_state32_t has field eax]),, - [#include <sys/cdefs.h> - #include <mach/thread_status.h>]) - AC_CHECK_MEMBER(x86_thread_state32_t.__eax, - AC_DEFINE(HAS_X86_THREAD_STATE32___EAX,1,dnl - [x86_thread_state32_t has field __eax]),, - [#include <sys/cdefs.h> - #include <mach/thread_status.h>]) - ;; - x86_64-*-darwin*) - AC_CHECK_MEMBER(x86_thread_state64_t.rax, - AC_DEFINE(HAS_X86_THREAD_STATE64_RAX,1,dnl - [x86_thread_state64_t has field rax]),, - [#include <sys/cdefs.h> - #include <mach/thread_status.h>]) - AC_CHECK_MEMBER(x86_thread_state64_t.__rax, - AC_DEFINE(HAS_X86_THREAD_STATE64___RAX,1,dnl - [x86_thread_state64_t has field __rax]),, - [#include <sys/cdefs.h> - #include <mach/thread_status.h>]) - ;; - *) ;; -esac - -# We never want libdl on darwin. It is a fake libdl that just ends up making -# dyld calls anyway -case "$host" in - *-*-darwin*) ;; - *) - AC_CHECK_LIB(dl, dlopen, EXTRA_TEST_LIBS="$EXTRA_TEST_LIBS -ldl") - ;; -esac - -# extra LD Flags which are required for targets -case "${host}" in - *-*-darwin*) - extra_ldflags_libgc=-Wl,-single_module - ;; -esac -AC_SUBST(extra_ldflags_libgc) - -AC_SUBST(EXTRA_TEST_LIBS) - -target_all=libgcjgc.la -AC_SUBST(target_all) - -dnl If the target is an eCos system, use the appropriate eCos -dnl I/O routines. -dnl FIXME: this should not be a local option but a global target -dnl system; at present there is no eCos target. -TARGET_ECOS="no" -AC_ARG_WITH(ecos, -[ --with-ecos enable runtime eCos target support], -TARGET_ECOS="$with_ecos" -) - -addobjs= -addlibs= -addincludes= -addtests= -case "$TARGET_ECOS" in - no) - ;; - *) - AC_DEFINE(ECOS,1,[Target is ECOS]) - AM_CPPFLAGS="${AM_CPPFLAGS} -I${TARGET_ECOS}/include" - addobjs="$addobjs ecos.lo" - ;; -esac - -if test "${enable_cplusplus}" = yes; then - addincludes="$addincludes include/gc_cpp.h include/gc_allocator.h" - addtests="$addtests test_cpp" -fi - -AM_CONDITIONAL(CPLUSPLUS, test "${enable_cplusplus}" = yes) - -AC_SUBST(CXX) - -AC_SUBST(AM_CPPFLAGS) - -# Configuration of shared libraries -# -AC_MSG_CHECKING(whether to build shared libraries) -AC_ENABLE_SHARED - -case "$host" in - alpha-*-openbsd*) - enable_shared=no - AC_MSG_RESULT(no) - ;; - *) - AC_MSG_RESULT(yes) - ;; -esac - -# Checks for pthreads functions -# -oldLIBS="$LIBS" -LIBS="$LIBS $THREADLIBS" -AC_CHECK_FUNCS([pthread_getattr_np]) -LIBS="$oldLIBS" - -# Configuration of machine-dependent code -# -# We don't set NO_EXECUTE_PERMISSION by default because gcj (and -# anything else that creates trampolines in gc-allocated memory) -# always needs exec permission. The exceptions to this are IA-64 and -# some variations of Power PC, where trampolines don't contain -# executable code. -# -AC_MSG_CHECKING(which machine-dependent code should be used) -machdep= -case "$host" in - alpha*-*-openbsd*) - machdep="alpha_mach_dep.lo" - if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then - AC_MSG_WARN(OpenBSD/Alpha without dlopen(). Shared library support is disabled) - fi - ;; - alpha*-*-linux*) - machdep="alpha_mach_dep.lo" - ;; - i?86-*-solaris2.[[89]] | i?86-*-solaris2.1?) - AC_DEFINE(SOLARIS25_PROC_VDB_BUG_FIXED,1,[PROC_VDB in Solaris 2.5 gives wrong values for dirty bits]) - ;; - mipstx39-*-elf*) - machdep="mips_ultrix_mach_dep.lo" - AC_DEFINE(STACKBASE, __stackbase,[No description]) - AC_DEFINE(DATASTART_IS_ETEXT,1,[No description]) - ;; - mips-dec-ultrix*) - machdep="mips_ultrix_mach-dep.lo" - ;; - mips-nec-sysv*|mips-unknown-sysv*) - ;; - mips*-*-linux*) - ;; - mips-*-*) - machdep="mips_sgi_mach_dep.lo" - ;; - sparc-*-netbsd*) - machdep="sparc_netbsd_mach_dep.lo" - ;; - sparc-sun-solaris2.3) - machdep="sparc_mach_dep.lo" - AC_DEFINE(SUNOS53_SHARED_LIB,1,[Avoid Solaris 5.3 dynamic library bug]) - ;; - sparc*-sun-solaris2.*) - machdep="sparc_mach_dep.lo" - ;; - ia64-*-*) - AC_DEFINE(NO_EXECUTE_PERMISSION,1,[cause some or all of the heap to not have execute permission]) - machdep="mach_dep.lo ia64_save_regs_in_stack.lo" - ;; -esac -if test x"$machdep" = x; then -AC_MSG_RESULT($machdep) - machdep="mach_dep.lo" -fi -addobjs="$addobjs $machdep" -AC_SUBST(addobjs) -AC_SUBST(addincludes) -AC_SUBST(addlibs) -AC_SUBST(addtests) - -# -# Check for AViiON Machines running DGUX -# -AC_MSG_CHECKING(if host is AViiON running DGUX) -ac_is_dgux=no -AC_CHECK_HEADER(sys/dg_sys_info.h, -[ac_is_dgux=yes;]) - -AC_MSG_RESULT($ac_is_dgux) - ## :GOTCHA: we do not check anything but sys/dg_sys_info.h -if test $ac_is_dgux = yes; then - if test "$enable_full_debug" = "yes"; then - CFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2" - CXXFLAGS="-g -mstandard -DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2" - else - CFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2" - CXXFLAGS="-DDGUX -D_DGUX_SOURCE -Di386 -mno-legend -O2" - fi - AC_SUBST(CFLAGS) - AC_SUBST(CXXFLAGS) -fi - -dnl As of 4.13a2, the collector will not properly work on Solaris when -dnl built with gcc and -O. So we remove -O in the appropriate case. -dnl Not needed anymore on Solaris. -AC_MSG_CHECKING(whether Solaris gcc optimization fix is necessary) -case "$host" in - *aix*) - if test "$GCC" = yes; then - AC_MSG_RESULT(yes) - new_CFLAGS= - for i in $CFLAGS; do - case "$i" in - -O*) - ;; - *) - new_CFLAGS="$new_CFLAGS $i" - ;; - esac - done - CFLAGS="$new_CFLAGS" - else - AC_MSG_RESULT(no) - fi - ;; - *) AC_MSG_RESULT(no) ;; -esac - -dnl We need to override the top-level CFLAGS. This is how we do it. -MY_CFLAGS="$CFLAGS" -AC_SUBST(MY_CFLAGS) - -dnl Include defines that have become de facto standard. -dnl ALL_INTERIOR_POINTERS can be overridden in startup code. -AC_DEFINE(SILENT,1,[disables statistics printing]) -AC_DEFINE(NO_SIGNALS,1,[does not disable signals]) -AC_DEFINE(ALL_INTERIOR_POINTERS,1,[allows all pointers to the interior of objects to be recognized]) - -dnl By default, make the library as general as possible. -AC_DEFINE(JAVA_FINALIZATION,1,[make it somewhat safer to finalize objects out of order]) -AC_DEFINE(GC_GCJ_SUPPORT,1,[include support for gcj]) -AC_DEFINE(ATOMIC_UNCOLLECTABLE,1,[include code for GC_malloc_atomic_uncollectable]) - -dnl This is something of a hack. When cross-compiling we turn off -dnl some functionality. These is only correct when targetting an -dnl embedded system. FIXME. -if test -n "${with_cross_host}"; then - AC_DEFINE(NO_SIGSET,1,[use empty GC_disable_signals and GC_enable_signals]) - AC_DEFINE(NO_DEBUGGING,1,[removes GC_dump]) -fi - -AC_ARG_ENABLE(gc-debug, -[ --enable-gc-debug include full support for pointer backtracing etc.], -[ if test "$enable_gc_debug" = "yes"; then - AC_MSG_WARN("Must define GC_DEBUG and use debug alloc. in clients.") - AC_DEFINE(KEEP_BACK_PTRS,1,[Add code to save back pointers]) - AC_DEFINE(DBG_HDRS_ALL,1,[Make sure that all objects have debug headers]) - case $host in - ia64-*-linux* ) - AC_DEFINE(MAKE_BACK_GRAPH,1,[Enable GC_PRINT_BACK_HEIGHT environment variable]) - ;; - x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* ) - AC_DEFINE(MAKE_BACK_GRAPH,1) - AC_MSG_WARN("Client must not use -fomit-frame-pointer.") - AC_DEFINE(SAVE_CALL_COUNT, 8, [number of call frames saved with objects allocated through the debugging interface]) - ;; - i[3456]86-*-dgux*) - AC_DEFINE(MAKE_BACK_GRAPH,1) - ;; - esac - fi]) - -if test "${gc_use_mmap}" = "yes"; then - AC_DEFINE(USE_MMAP, 1, [use MMAP instead of sbrk to get new memory]) -fi - -if test -n "$with_cross_host" && - test x"$with_cross_host" != x"no"; then - toolexecdir='$(exec_prefix)/$(target_noncanonical)' - toolexeclibdir='$(toolexecdir)/lib' -else - toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)' - toolexeclibdir='$(libdir)' -fi -multi_os_directory=`$CC -print-multi-os-directory` -case $multi_os_directory in - .) ;; # Avoid trailing /. - *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;; -esac -AC_SUBST(toolexecdir) -AC_SUBST(toolexeclibdir) - -if test "${multilib}" = "yes"; then - multilib_arg="--enable-multilib" -else - multilib_arg= -fi - -AC_CONFIG_HEADERS([include/gc_config.h include/gc_ext_config.h]) - -AC_CONFIG_FILES(Makefile include/Makefile) -AC_OUTPUT |