diff options
Diffstat (limited to 'gcc-4.2.1-5666.3/gcc/config/i386/constraints.md')
-rw-r--r-- | gcc-4.2.1-5666.3/gcc/config/i386/constraints.md | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/gcc-4.2.1-5666.3/gcc/config/i386/constraints.md b/gcc-4.2.1-5666.3/gcc/config/i386/constraints.md new file mode 100644 index 000000000..5d76ac523 --- /dev/null +++ b/gcc-4.2.1-5666.3/gcc/config/i386/constraints.md @@ -0,0 +1,171 @@ +;; Constraint definitions for IA-32 and x86-64. +;; Copyright (C) 2006 Free Software Foundation, Inc. +;; +;; This file is part of GCC. +;; +;; GCC is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 2, or (at your option) +;; any later version. +;; +;; GCC is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. +;; +;; You should have received a copy of the GNU General Public License +;; along with GCC; see the file COPYING. If not, write to +;; the Free Software Foundation, 51 Franklin Street, Fifth Floor, +;; Boston, MA 02110-1301, USA. + +;;; Unused letters: +;;; B H TU W +;;; h jk vw z + +;; Integer register constraints. +;; It is not necessary to define 'r' here. +(define_register_constraint "R" "LEGACY_REGS" + "Legacy register---the eight integer registers available on all + i386 processors (@code{a}, @code{b}, @code{c}, @code{d}, + @code{si}, @code{di}, @code{bp}, @code{sp}).") + +(define_register_constraint "q" "TARGET_64BIT ? GENERAL_REGS : Q_REGS" + "Any register accessible as @code{@var{r}l}. In 32-bit mode, @code{a}, + @code{b}, @code{c}, and @code{d}; in 64-bit mode, any integer register.") + +(define_register_constraint "Q" "Q_REGS" + "Any register accessible as @code{@var{r}h}: @code{a}, @code{b}, + @code{c}, and @code{d}.") + +(define_register_constraint "l" "INDEX_REGS" + "@internal Any register that can be used as the index in a base+index + memory access: that is, any general register except the stack pointer.") + +(define_register_constraint "a" "AREG" + "The @code{a} register.") + +(define_register_constraint "b" "BREG" + "The @code{b} register.") + +(define_register_constraint "c" "CREG" + "The @code{c} register.") + +(define_register_constraint "d" "DREG" + "The @code{d} register.") + +(define_register_constraint "S" "SIREG" + "The @code{si} register.") + +(define_register_constraint "D" "DIREG" + "The @code{di} register.") + +(define_register_constraint "A" "AD_REGS" + "The @code{a} and @code{d} registers, as a pair (for instructions + that return half the result in one and half in the other).") + +;; Floating-point register constraints. +(define_register_constraint "f" + "TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FLOAT_REGS : NO_REGS" + "Any 80387 floating-point (stack) register.") + +(define_register_constraint "t" + "TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_TOP_REG : NO_REGS" + "Top of 80387 floating-point stack (@code{%st(0)}).") + +(define_register_constraint "u" + "TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_SECOND_REG : NO_REGS" + "Second from top of 80387 floating-point stack (@code{%st(1)}).") + +;; Vector registers (also used for plain floating point nowadays). +(define_register_constraint "y" "TARGET_MMX ? MMX_REGS : NO_REGS" + "Any MMX register.") + +(define_register_constraint "x" "TARGET_SSE ? SSE_REGS : NO_REGS" + "Any SSE register.") + +;; APPLE LOCAL begin 5612787 mainline sse4 +;; We use the Y prefix to denote any number of conditional register sets: +;; 0 First SSE register. +;; t SSE2 enabled +;; i SSE2 inter-unit moves enabled +;; m MMX inter-unit moves enabled + +(define_register_constraint "Y0" "TARGET_SSE ? SSE_FIRST_REG : NO_REGS" + "First SSE register (@code{%xmm0}).") + +(define_register_constraint "Yt" "TARGET_SSE2 ? SSE_REGS : NO_REGS" + "@internal Any SSE register, when SSE2 is enabled.") + +(define_register_constraint "Yi" + "TARGET_SSE2 && TARGET_INTER_UNIT_MOVES ? SSE_REGS : NO_REGS" + "@internal Any SSE register, when SSE2 and inter-unit moves are enabled.") + +(define_register_constraint "Ym" + "TARGET_MMX && TARGET_INTER_UNIT_MOVES ? MMX_REGS : NO_REGS" + "@internal Any MMX register, when inter-unit moves are enabled.") +;; APPLE LOCAL end 5612787 mainline sse4 + +;; Integer constant constraints. +(define_constraint "I" + "Integer constant in the range 0 @dots{} 31, for 32-bit shifts." + (and (match_code "const_int") + (match_test "ival >= 0 && ival <= 31"))) + +(define_constraint "J" + "Integer constant in the range 0 @dots{} 63, for 64-bit shifts." + (and (match_code "const_int") + (match_test "ival >= 0 && ival <= 63"))) + +(define_constraint "K" + "Signed 8-bit integer constant." + (and (match_code "const_int") + (match_test "ival >= -128 && ival <= 127"))) + +(define_constraint "L" + "@code{0xFF} or @code{0xFFFF}, for andsi as a zero-extending move." + (and (match_code "const_int") + (match_test "ival == 0xFF || ival == 0xFFFF"))) + +(define_constraint "M" + "0, 1, 2, or 3 (shifts for the @code{lea} instruction)." + (and (match_code "const_int") + (match_test "ival >= 0 && ival <= 3"))) + +(define_constraint "N" + "Unsigned 8-bit integer constant (for @code{in} and @code{out} + instructions)." + (and (match_code "const_int") + (match_test "ival >= 0 && ival <= 255"))) + +(define_constraint "O" + "@internal Integer constant in the range 0 @dots{} 127, for 128-bit shifts." + (and (match_code "const_int") + (match_test "ival >= 0 && ival <= 127"))) + +;; Floating-point constant constraints. +;; We allow constants even if TARGET_80387 isn't set, because the +;; stack register converter may need to load 0.0 into the function +;; value register (top of stack). +(define_constraint "G" + "Standard 80387 floating point constant." + (and (match_code "const_double") + (match_test "standard_80387_constant_p (op)"))) + +;; This can theoretically be any mode's CONST0_RTX. +(define_constraint "C" + "Standard SSE floating point constant." + (match_test "standard_sse_constant_p (op)")) + +;; Constant-or-symbol-reference constraints. + +(define_constraint "e" + "32-bit signed integer constant, or a symbolic reference known + to fit that range (for immediate operands in sign-extending x86-64 + instructions)." + (match_operand 0 "x86_64_immediate_operand")) + +(define_constraint "Z" + "32-bit unsigned integer constant, or a symbolic reference known + to fit that range (for immediate operands in zero-extending x86-64 + instructions)." + (match_operand 0 "x86_64_zext_immediate_operand")) |